- 06 Nov, 2014 40 commits
-
-
Kevin Cernekee authored
This device was originally supported on bcm63xx only, but it shows up on a wide variety of MIPS and ARM chipsets spanning multiple product lines. Now that the driver has eliminated dependencies on bcm63xx-specific header files, we can build it on any non-bcm63xx kernel. Compile-tested on x86, both statically and as a module. Tested for functionality on bcm3384 (a new MIPS platform under active development). Signed-off-by:
Kevin Cernekee <cernekee@gmail.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Daniel Thompson authored
For the console poll usage, .poll_init() will perform deeper hardware initialization to ensure the serial port is always active. Signed-off-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
Dirk Behme <dirk.behme@de.bosch.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Huang Shijie <b32955@freescale.com> Cc: linux-serial@vger.kernel.org Signed-off-by:
-
Daniel Thompson authored
imx_put_poll_char() has been simplified to remove the code to disable interrupts. The present code can corrupt register state when re-entered from FIQ handler. Switch to _relaxed() MMIO functions (which are safe for polled I/O and needed to avoid taking spin locks). Signed-off-by:
-
Stephen Boyd authored
We rely on probe order of this driver to determine the line number for the uart port. This makes it impossible to know the line number when these devices are populated via DT. Use the DT alias mechanism to assign the line based on the aliases node. Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Stephen Boyd authored
We need to issue a reset if we ever change the value of the IPR register on DM hardware. If we don't reset the hardware the RX stale interrupt never triggers and the only way to trigger an RX handling event is by filling up the fifo. This causes things like getty to not work so well considering it might change the baud rate a few times. Fix this by moving the reset on startup and any reprogramming required after the reset to be after we change the baud rate. Signed-off-by:
-
Stephen Boyd authored
To properly support sysrq on uartDM hardware we need to properly handle break characters. With the DM hardware the fifo can pack 4 characters at a time, where a break is indicated by an all zero byte. Unfortunately, we can't differentiate between an all zero byte for a break and an all zero byte of data, so try and do as best we can. First unmask the RX break start interrupt and record the interrupt when it arrives. Then while processing the fifo, detect the break by searching for an all zero character as long as we recently received an RX break start interrupt. This should make sysrq work fairly well. Cc: Frank Rowand <frank.rowand@sonymobile.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
-
Stephen Boyd authored
The handle_rx() path calls uart_handle_sysrq_char() with the port lock held. This causes a spinlock recursion. Release and reacquire the lock here to avoid this. BUG: spinlock recursion on CPU#0, swapper/0 lock: msm_uart_ports+0x1e0/0x2d0, .magic: dead4ead, .owner: swapper/0, .owner_cpu: 0 CPU: 0 PID: 0 Comm: swapper Not tainted 3.17.0-rc7-00012-gb38ee8265941 #69 [<c0013964>] (unwind_backtrace) from [<c0011f74>] (show_stack+0x10/0x14) [<c0011f74>] (show_stack) from [<c004ed1c>] (do_raw_spin_lock+0x11c/0x13c) [<c004ed1c>] (do_raw_spin_lock) from [<c02d44c0>] (msm_console_write+0x78/0x188) [<c02d44c0>] (msm_console_write) from [<c0052880>] (call_console_drivers.constprop.22+0xb4/0x144) [<c0052880>] (call_console_drivers.constprop.22) from [<c0053570>] (console_unlock+0x27c/0x4ac) [<c0053570>] (console_unlock) from [<c0053bb4>] (vprintk_emit+0x1f4/0x5a8) [<c0053bb4>] (vprintk_emit) from [<c04ad0ac>] (printk+0x30/0x40) [<c04ad0ac>] (printk) from [<c02c2990>] (__handle_sysrq+0x58/0x1b8) [<c02c2990>] (__handle_sysrq) from [<c02d41b0>] (msm_irq+0x694/0x6f8) [<c02d41b0>] (msm_irq) from [<c0055740>] (handle_irq_event_percpu+0x58/0x270) [<c0055740>] (handle_irq_event_percpu) from [<c0055994>] (handle_irq_event+0x3c/0x5c) [<c0055994>] (handle_irq_event) from [<c0057e84>] (handle_level_irq+0x9c/0x138) [<c0057e84>] (handle_level_irq) from [<c005509c>] (generic_handle_irq+0x24/0x38) [<c005509c>] (generic_handle_irq) from [<c000f730>] (handle_IRQ+0x44/0xb0) [<c000f730>] (handle_IRQ) from [<c0008518>] (msm_vic_handle_irq+0x44/0x64) [<c0008518>] (msm_vic_handle_irq) from [<c04b5ac4>] (__irq_svc+0x44/0x7c) Exception stack(0xc0719f68 to 0xc0719fb0) 9f60: 00000001 00000001 00000000 c0722938 c0718000 c0769acc 9f80: 00000000 c0720098 c0769305 4117b362 c0769acc 00000000 01000000 c0719fb0 9fa0: c004cab0 c000f880 20000013 ffffffff [<c04b5ac4>] (__irq_svc) from [<c000f880>] (arch_cpu_idle+0x20/0x30) [<c000f880>] (arch_cpu_idle) from [<c004691c>] (cpu_startup_entry+0xf4/0x23c) [<c004691c>] (cpu_startup_entry) from [<c06d8b70>] (start_kernel+0x32c/0x394) Cc: Frank Rowand <frank.rowand@sonymobile.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
-
Janusz Uzycki authored
Enables PPS support in mxs-auart serial driver to make PPS API working. Signed-off-by:
Janusz Uzycki <j.uzycki@elproma.com.pl> Signed-off-by:
-
Janusz Uzycki authored
Handle CTS/DSR/RI/DCD GPIO interrupts in mxs-auart. Signed-off-by:
-
Janusz Uzycki authored
Dedicated CTS and RTS pins are unusable together with a lot of other peripherals because they share the same line. Pinctrl is limited. Moreover, the AUART controller doesn't handle DTR/DSR/DCD/RI signals, so we have to control them via GPIO. This patch permits to use GPIOs to control the CTS/RTS/DTR/DSR/DCD/RI signals. Signed-off-by:
Richard Genoud <richard.genoud@gmail.com> Signed-off-by:
-
Janusz Uzycki authored
Russell King: The only thing which the .get_mctrl method is supposed to do is to return the state of the /input/ lines, which are CTS, DCD, DSR, RI. The output line state is stored in port->mctrl, and is added to the returned value by serial_core when it's required. RTS output state should not be returned from the .get_mctrl method. This patch removes ctrl variable from mxs_auart_port and removes useless reading back RTS line. The ctrl variable in mxs_auart_port duplicated mctrl, member of uart_port structure in serial_core.h. The removed code from mxs_auart_set_mctrl() and mxs_auart_get_mctrl duplicated uart_update_mctrl() and uart_tiocmget() in serial_core.c. Signed-off-by:
-
Cyrille Pitchen authored
This patch swaps the use "tail" and "head" to fit the semantic of the linux circular buffer documentation: - head: the point at which the producer (the DMA controller) inserts items. - tail: the point at which the consumer (the serial framework) finds the next item. Besides the former code of the rx ring buffer didn't manage the case where head < tail, which might lead to loss of data. To fix this bug the data are now sent from the DMA buffer to the serial framework in two steps: 1 - First, we test if head < tail. If so, we copy the data from tail to the end of the DMA buffer then reset tail to zero. 2 - Finally, we copy data from tail to head then set tail to head. In addition, since tty_insert_flip_string() may now be called twice, atmel_flip_buffer_rx_dma() becomes less efficient than moving the calls dma_sync_sg_for_cpu(), dma_sync_sg_for_device(), tty_insert_flip_string() and tty_flip_buffer_push() directly into atmel_rx_from_dma(). Signed-off-by:Cyrille Pitchen <cyrille.pitchen@atmel.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
John Crispin authored
Signed-off-by:
John Crispin <blogic@openwrt.org> Signed-off-by:
-
John Crispin authored
Add the config symbol for Mediatek MT7620 SoC to the SERIAL_8250_RT288X dependencies. Signed-off-by:
-
John Crispin authored
The Ralink RT2880 SoC and its successors have an internal 8250 core. This core needs the same quirks applied as the AMD AU1xxx uart. In addition to these quirks, the ports memory region is only 0x100 unlike the AU1xxx which has a size of 0x1000. Signed-off-by:
-
Nishanth Menon authored
Increase the maximum number of consoles possible to 10 since DRA7 now has the maximum number of consoles possible. without doing this, for example, enabling DRA7 UART10 results in internal data structures and console cannot match up and we endup with a crash as follows: [ 1.903503] omap_uart 48424000.serial: [UART-1]: failure [serial_omap_probe]: -22 [ 1.911437] omap_uart: probe of 48424000.serial failed with error -22 [ 1.920379] Unable to handle kernel NULL pointer dereference at virtual address 00000004 [ 1.928894] pgd = c0004000 [ 1.931732] [00000004] *pgd=00000000 [ 1.935485] Internal error: Oops: 5 [#1] SMP ARM [ 1.940338] Modules linked in: [ 1.943542] CPU: 1 PID: 12 Comm: kworker/1:0 Tainted: G W 3.18.0-rc1-00001-g8821bc4-dirty #6 [ 1.953521] task: ed8a2d00 ti: ed8a4000 task.ti: ed8a4000 [ 1.959197] PC is at process_one_work+0x38/0x4a4 [ 1.964050] LR is at 0x0 [ 1.966705] pc : [<c00548e0>] lr : [<00000000>] psr: 40000093 [ 1.966705] sp : ed8a5ea8 ip : ed8a5ec8 fp : eeb9abc0 [ 1.978759] r10: ed8a4000 r9 : 00000008 r8 : ed842458 [ 1.984252] r7 : 00000000 r6 : eeb9abc0 r5 : ed842440 r4 : edbf26a8 [ 1.991119] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : 00000000 [ 1.997985] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel [ 2.005767] Control: 10c5387d Table: 8000406a DAC: 00000015 [ 2.011810] Process kworker/1:0 (pid: 12, stack limit = 0xed8a4248) [ 2.018371] Stack: (0xed8a5ea8 to 0xed8a6000) [ 2.022949] 5ea0: 00000001 00000000 60000093 c008346c 00000001 ed8a5ec8 [ 2.031555] 5ec0: c0054de4 eeb9abc0 ed8a4000 ed842458 00000008 ed8a4000 eeb9abc0 ed842440 [ 2.040161] 5ee0: eeb9abc0 eeb9abf0 ed8a4000 ed842458 00000008 ed8a4000 eeb9abc0 c0054ec4 [ 2.048767] 5f00: ed8a4000 eeb9ac4c a0000053 00000000 ed845bc0 ed842440 c0054d80 00000000 [ 2.057342] 5f20: 00000000 00000000 00000000 c005999c 00000001 00000000 c05eaa64 ed842440 [ 2.065948] 5f40: 00000000 00000000 dead4ead ffffffff ffffffff c097c680 00000000 00000000 [ 2.074554] 5f60: c078acd4 ed8a5f64 ed8a5f64 00000000 00000000 dead4ead ffffffff ffffffff [ 2.083160] 5f80: c097c680 00000000 00000000 c078acd4 ed8a5f90 ed8a5f90 600000d3 ed845bc0 [ 2.091766] 5fa0: c00598d4 00000000 00000000 c000e668 00000000 00000000 00000000 00000000 [ 2.100341] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.108947] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 90005148 11010482 [ 2.117553] [<c00548e0>] (process_one_work) from [<c0054ec4>] (worker_thread+0x144/0x498) [ 2.126159] [<c0054ec4>] (worker_thread) from [<c005999c>] (kthread+0xc8/0xe4) [ 2.133758] [<c005999c>] (kthread) from [<c000e668>] (ret_from_fork+0x14/0x2c) [ 2.141357] Code: e1a04001 e1a05000 e893000f e31e0004 (e5978004) [ 2.147766] ---[ end trace 5798e2803311b69f ]--- <snip> The final solution is to transition off to use 8250 driver and no dependency on console structures and move away from omap-serial driver, hence no major cleanups are done for this driver, so add a simple check to prevent future crashes in a similar manner in case of platform with additional ports. Signed-off-by:
Nishanth Menon <nm@ti.com> Acked-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Peter Hurley authored
Commit 479e9b94 ("serial: Refactor uart_flush_buffer() from uart_close") refactored the uart_flush_buffer() in uart_close() into those drivers that define a flush_buffer() method. However, in the amba-pl011 driver configured without CONFIG_DMA_ENGINE, flush_buffer() is a NULL method, so the direct call fails to compile. Check and call the flush_buffer() method through the ops table instead. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
-
Peng Fan authored
This patch fixes sparse warning: "obsolete struct initializer, use C99 syntax" Signed-off-by:
Peng Fan <van.freenix@gmail.com> Signed-off-by:
-
Peter Hurley authored
devm_kzalloc() already warns if allocation fails; remove duplicate message. Signed-off-by:
-
Peter Hurley authored
vt_get_kmsg_redirect() only has meaning to the console driver as an alias for calling vt_kmsg_redirect(). Move the macro definition to the only source file which uses it; remove from uapi/linux/vt.h Signed-off-by:
-
Peter Hurley authored
The last vestige of ASYNC_SPLIT_TERMIOS was removed by commit 'cris: Remove obsolete ASYNC_SPLIT_TERMIOS behavior'. Mark the flag as defunct in the uapi header. Signed-off-by:
-
Peter Hurley authored
ASYNC_SPLIT_TERMIOS behavior is a remnant of the long-dead /dev/cuaXX callout device. Split termios handling was removed tree-wide in v2.5.71 by: commit 99a21ede Author: Alexander Viro <viro@www.linux.org.uk> Date: Wed Jun 11 07:41:28 2003 -0700 [PATCH] tty_driver refcounting killed the last remnants of callout stuff - we don't need to mess with storing termios privately anymore. which pre-dated the re-introduction into the cris serial driver in v2.6.7 by: commit 311a5ffe Author: Andrew Morton <akpm@osdl.org> Date: Mon May 31 18:52:29 2004 -0700 [PATCH] CRIS architecture update From: "Mikael Starvik" <mikael.starvik@axis.com> - Lots of fixes from 2.4. - Updated for 2.6.6. - Added IDE driver Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by:
-
Peter Hurley authored
setup_serial_console() is obsolete and has been superseded by early_serial_setup() which is called at the end of the function. The IA64 arch does not call this function; only the m68k arch setup calls this function. Signed-off-by:
-
Peter Hurley authored
serial_console_init() is not defined by the tty core; remove declaration. Note that the powerpc arch boot code contains a serial_console_init() declaration in arch/powerpc/boot/ops.h which is restricted to the powerpc arch boot. Signed-off-by:
-
Peter Hurley authored
pcxe_open() has no definition in mainline; remove declaration. Signed-off-by:
-
Peter Hurley authored
The use of older function ptr calling style, (*fn)(), makes static analysis more error-prone; replace with modern fn() style. Signed-off-by:
-
Peter Hurley authored
tty_hung_up_p() is equivalent to the open-coded test in tty_open(). Signed-off-by:
-
Joe Perches authored
Precedence of & and >> is not the same and is not left to right. shift has higher precedence and should be done after the mask. Add parentheses around the masks. Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
David Sterba <dsterba@suse.cz> Reviewed-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Fabio Estevam authored
There is no real value in displaying "Serial: IMX driver" in every boot. The uart_register_driver() can fail and even so the "Serial: IMX driver" will be displayed, which is not really helpful. This is particularly annoying when booting multi_v7_defconfig kernel on a SoC that is not a i.MX and even though this message gets displayed. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
Fabio Estevam authored
When kzalloc() fails the core MM will already complain about it, so there is no need to have the error message locally. Remove the unneeded error message. Signed-off-by:
-
Fabio Estevam authored
Instead of jumping to 'error_out1' label we can simplify the code and return the error code directly. Signed-off-by:
-
Fabio Estevam authored
On a imx system with ttymxc0, ttymxc1 and ttymxc4 registered we see the following output from 'cat /proc/interrupts': $ cat /proc/interrupts CPU0 ... 58: 39 GIC 58 2020000.serial 67: 115 GIC 67 21f8000.i2c The only uart irq that appears is ttymxc0, which is the console. As ttymxc1 and ttymxc4 will only have their irq registered at imx_startup(), they are not shown right after probe. Transmitting to ttymxc1 and ttymxc4 will cause their irqs to be registered, but the output shows: $ echo "111111" > /dev/ttymxc1 $ echo "444444" > /dev/ttymxc4 $ cat /proc/interrupts CPU0 ... 58: 150 GIC 58 2020000.serial 59: 1 GIC 59 62: 1 GIC 62 67: 115 GIC 67 21f8000.i2c ,which misses printing the associated device address. In order to fix this, register all the irqs inside the probe function via devm_request_irq(), which will correctly report the serial interrupts associated with their correspondent serial device and also helps simplyfing the code by avoiding the calls to free_irq(). $ echo "111111" > /dev/ttymxc1 $ echo "444444" > /dev/ttymxc4 $ cat /proc/interrupts CPU0 .... 58: 202 GIC 58 2020000.serial 59: 1 GIC 59 21e8000.serial 62: 1 GIC 62 21f4000.serial 67: 115 GIC 67 21f8000.i2c Signed-off-by: -
Kumar Gala authored
For the case in which we just provide an address as an argument to the earlycon console type like: earlycon=msm_serial_dm,0xf991e000 We would report this as an IO port based mapping and not as MMIO. Simple fix to use the port->iotype to decide which message to print. Signed-off-by:
Kumar Gala <galak@codeaurora.org> Acked-by:
Mark RUtland <mark.rutland@arm.com> Signed-off-by:
-
Greg Kroah-Hartman authored
We need the fixes in drivers/tty/tty_io.c that were done in there for future patches in this branch. Signed-off-by: -
Ricardo Ribalda Delgado authored
Commit e676253b ("serial/8250: Add support for RS485 IOCTLs") added references to TIOC[SG]RS48 on 8250_core.c. This change triggered the need to define them in all the arches that uses tty/serial. This made #ifdef TIOC[SG]RS48 obsolete. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: linux-serial@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by:
-
Ricardo Ribalda Delgado authored
Commit e676253b ("serial/8250: Add support for RS485 IOCTLs") added references to TIOC[SG]RS48 on 8250_core.c. This change triggered the need to define them in all the arches that uses tty/serial. This made #ifdef TIOC[SG]RS48 obsolete. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: linux-serial@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Ray Jui authored
The dma pointer under struct uart_8250_port is currently left unassigned for non-ACPI platforms. It should be pointing to the dma member in struct dw8250_data like how it was done for ACPI, so the core 8250 code will try to request for DMA when registering the port If DMA is not enabled in device tree, request DMA will fail and the driver will fall back to PIO Signed-off-by:
Ray Jui <rjui@broadcom.com> Reviewed-by:
JD (Jiandong) Zheng <jdzheng@broadcom.com> Reviewed-by:
Scott Branden <sbranden@broadcom.com> Tested-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
-
Masanari Iida authored
This patch remove unnecessary KERN_ERR in pr_warning() within hvcs.c Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Signed-off-by:
-
Gregory Hermant authored
This patch allows to read the REV_ID register in SPI mode and consequently to properly detect the max3109. Indeed in SPI mode, this register is only accessible by using indirect addressing. Signed-off-by:
Gregory Hermant <gregory.hermant@calao-systems.com> Signed-off-by:
-
Paul Bolle authored
Commit 32726d2d ("ARM: SAMSUNG: Remove legacy clock code") removed the Kconfig symbol SAMSUNG_CLOCK. Remove the last checks for its macro, and the dead code they hide, too. Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
-
