The analog TV properties created by the drm_mode_create_tv_properties() are
not properly initialised at reset. Let's switch our implementation to call
drm_atomic_helper_connector_tv_reset().
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-15-256dad125326@cerno.techSigned-off-by: Maxime Ripard <maxime@cerno.tech>

The analog TV connector drivers share some atomic_check logic, and the new
TV standard property have created some boilerplate that can be shared
across drivers too.

Let's create an atomic_check helper for those use cases.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-14-256dad125326@cerno.techSigned-off-by: Maxime Ripard <maxime@cerno.tech>

The drm_tv_create_properties() function will create a bunch of properties,
but it's up to each and every driver using that function to properly reset
the state of these properties leading to inconsistent behaviours.

Let's create a helper that will take care of it.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-13-256dad125326@cerno.techSigned-off-by: Maxime Ripard <maxime@cerno.tech>

Most of the TV connectors will need a similar get_modes implementation
that will, depending on the drivers' capabilities, register the 480i and
576i modes.

That implementation will also need to set the preferred flag and order
the modes based on the driver and users preferrence.

This is especially important to guarantee that a userspace stack such as
Xorg can start and pick up the preferred mode while maintaining a
working output.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-12-256dad125326@cerno.techSigned-off-by: Maxime Ripard <maxime@cerno.tech>

Now that we can easily extend the named modes list, let's add a few more
analog TV modes that were used in the wild, and some unit tests to make
sure it works as intended.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-11-256dad125326@cerno.techSigned-off-by: Maxime Ripard <maxime@cerno.tech>

Commit 3aeeb13d ("drm/modes: Support modes names on the command
line") initially introduced the named modes support by essentially
matching the name passed on the command-line to the mode names defined
by the drivers.

This proved to be difficult to work with, since all drivers had to
provide properly named modes. This was also needed because we weren't
passing a full blown-mode to the drivers, but were only filling its
name.

Thanks to the previous patches, we now generate a proper mode, and we
thus can use the usual matching algo on timings, and can simply drop the
name match.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Suggested-by: Noralf Trønnes <noralf@tronnes.org>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-10-256dad125326@cerno.techSigned-off-by: Maxime Ripard <maxime@cerno.tech>

The framework will get the drm_display_mode from the drm_cmdline_mode it
got by parsing the video command line argument by calling
drm_connector_pick_cmdline_mode().

The heavy lifting will then be done by the
drm_mode_create_from_cmdline_mode() function.

In the case of the named modes though, there's no real code to make that
translation and we rely on the drivers to guess which actual display mode
we meant.

Let's modify drm_mode_create_from_cmdline_mode() to properly generate the
drm_display_mode we mean when passing a named mode.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-9-256dad125326@cerno.techSigned-off-by: Maxime Ripard <maxime@cerno.tech>

Our new tv mode option allows to specify the TV mode from a property.
However, it can still be useful, for example to avoid any boot time
artifact, to set that property directly from the kernel command line.

Let's add some code to allow it, and some unit tests to exercise that code.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-8-256dad125326@cerno.techSigned-off-by: Maxime Ripard <maxime@cerno.tech>

As part of the command line parsing rework coming in the next patches,
we'll need to lookup drm_connector_tv_mode values by their name, already
defined in drm_tv_mode_enum_list.

In order to avoid any code duplication, let's do a function that will
perform a lookup of a TV mode name and return its value.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-7-256dad125326@cerno.techSigned-off-by: Maxime Ripard <maxime@cerno.tech>

Multiple drivers (meson, vc4, sun4i) define analog TV 525-lines and
625-lines modes in their drivers.

Since those modes are fairly standard, and that we'll need to use them
in more places in the future, it makes sense to move their definition
into the core framework.

However, analog display usually have fairly loose timings requirements,
the only discrete parameters being the total number of lines and pixel
clock frequency. Thus, we created a function that will create a display
mode from the standard, the pixel frequency and the active area.
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-6-256dad125326@cerno.techSigned-off-by: Maxime Ripard <maxime@cerno.tech>

The TV mode property has been around for a while now to select and get the
current TV mode output on an analog TV connector.

Despite that property name being generic, its content isn't and has been
driver-specific which makes it hard to build any generic behaviour on top
of it, both in kernel and user-space.

Let's create a new enum tv norm property, that can contain any of the
analog TV standards currently supported by kernel drivers. Each driver can
then pass in a bitmask of the modes it supports, and the property
creation function will filter out the modes not supported.

We'll then be able to phase out the older tv mode property.
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-5-256dad125326@cerno.techSigned-off-by: Maxime Ripard <maxime@cerno.tech>

drm_mode_create_tv_properties(), among other things, will create the
"mode" property that stores the analog TV mode that connector is
supposed to output.

However, that property is getting deprecated, so let's rename that
function to mention it's deprecated. We'll introduce a new variant of
that function creating the property superseeding it in a later patch.

Reviewed-by: Lyude Paul <lyude@redhat.com> # nouveau
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-4-256dad125326@cerno.techSigned-off-by: Maxime Ripard <maxime@cerno.tech>

The drm_create_tv_properties() will create the TV mode property
unconditionally.

However, since we'll gradually phase it out, let's register it only if we
have a list passed as an argument. This will make the transition easier.
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-3-256dad125326@cerno.techSigned-off-by: Maxime Ripard <maxime@cerno.tech>

The current tv_mode has driver-specific values that don't allow to
easily share code using it, either at the userspace or kernel level.

Since we're going to introduce a new, generic, property that fit the
same purpose, let's rename this one to legacy_tv_mode to make it
obvious we should move away from it.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com> # nouveau
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-2-256dad125326@cerno.techSigned-off-by: Maxime Ripard <maxime@cerno.tech>

That file is included directly, so we can't use any MODULE macro. Let's
leave a comment to avoid any future mistake.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-1-256dad125326@cerno.techSigned-off-by: Maxime Ripard <maxime@cerno.tech>

I've been collecting these typo fixes for a while and it feels like
time to send them in.
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123193519.3948105-1-tjmercier@google.comSigned-off-by: Christian König <christian.koenig@amd.com>

Backmerging to get v6.1-rc6 into drm-misc-next.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Linux 6.1-rc6

This is needed for drm-misc-next and tegra.
Signed-off-by: Dave Airlie <airlied@redhat.com>

As of commit eae06120 ("drm: refuse ADDFB2 ioctl for broken
bigendian drivers"), drivers must set the
quirk_addfb_prefer_host_byte_order quirk to make the drm_mode_addfb()
compat code work correctly on big-endian machines.

While that works fine for big-endian XRGB8888 and ARGB8888, which are
mapped to the existing little-endian BGRX8888 and BGRA8888 formats, it
does not work for big-endian XRGB1555 and RGB565, as the latter are not
listed in the format database.

Fix this by adding the missing formats.  Limit this to big-endian
platforms, as there is currently no need to support these formats on
little-endian platforms.

Fixes: 6960e6da ("drm: fix drm_mode_addfb() on big endian machines.")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/3ee1f8144feb96c28742b22384189f1f83bcfc1a.1669221671.git.geert@linux-m68k.org

Correct grammar and make the use of the igt-tests more readable.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Gabriela Bittencourt <gabrielabittencourt00@gmail.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: dri-devel@lists.freedesktop.org
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118235137.6859-1-rdunlap@infradead.org

The drm_sched_entity_kill() is invoked twice by drm_sched_entity_destroy()
while userspace process is exiting or being killed. First time it's invoked
when sched entity is flushed and second time when entity is released. This
causes a lockup within wait_for_completion(entity_idle) due to how completion
API works.

Calling wait_for_completion() more times than complete() was invoked is a
error condition that causes lockup because completion internally uses
counter for complete/wait calls. The complete_all() must be used instead
in such cases.

This patch fixes lockup of Panfrost driver that is reproducible by killing
any application in a middle of 3d drawing operation.

Fixes: 2fdb8a8f ("drm/scheduler: rework entity flush, kill and fini")
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123001303.533968-1-dmitry.osipenko@collabora.com

GVT Changes:
- gvt-next stuff mostly with refactor for the new MDEV interface.

i915 Changes:
- PSR fixes and improvements (Jouni)
- DP DSC fixes (Vinod, Jouni)
- More general display cleanups (Jani)
- More display collor management cleanup targetting degamma (Ville)
- remove circ_buf.h includes (Jiri)
- wait power off delay at driver remove to optimize probe (Jani)
- More audio cleanup targeting the ELD precompute readout (Ville)
- Enable DC power states on all eDP ports (Imre)
- RPL-P stepping info (Matt Atwood)
- MTL enabling patches (RK)
- Removal of DG2 force_probe (Matt)
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y3f71obyEkImXoUF@intel.com

Merge tag 'drm-intel-gt-next-2022-11-18' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Core Changes:

- Backmerge of drm-next

Driver Changes:

- Restore probe_range behaviour for userptr (Matt A)
- Fix use-after-free on lmem_userfault_list (Matt A)
- Never purge busy TTM objects (Matt A)
- Meteorlake enabling (Daniele, Badal, Daniele, Stuart, Aravind, Alan)
- Demote GuC kernel contexts to normal priority (John)

- Use RC6 residency types as arguments to residency functions (Ashutosh,
  Rodrigo, Jani)
- Convert some legacy DRM debugging macros to new ones (Tvrtko)
- Don't deadlock GuC busyness stats vs reset (John)
- Remove excessive line feeds in GuC state dumps (John)
- Use i915_sg_dma_sizes() for all backends (Matt A)
- Prefer REG_FIELD_GET in intel_rps_get_cagf (Ashutosh, Rodrigo)
- Use GEN12_RPSTAT register for GT freq (Don, Badal, Ashutosh)
- Remove unwanted TTM ghost obj check (Matt A)
- Update workaround documentation (Lucas)

- Coding style and static checker fixes and cleanups
  (Jani, Umesh, Tvrtko, Lucas, Andrzej)
- Selftest improvements (Chris, Daniele, Riana, Andrzej)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y3dMd9HDpfDehhWm@jlahtine-mobl.ger.corp.intel.com

amd-drm-next-6.2-2022-11-18:

amdgpu:
- SR-IOV fixes
- Clean up DC checks
- DCN 3.2.x fixes
- DCN 3.1.x fixes
- Don't enable degamma on asics which don't support it
- IP discovery fixes
- BACO fixes
- Fix vbios allocation handling when vkms is enabled
- Drop buggy tdr advanced mode GPU reset handling
- Fix the build when DCN is not set in kconfig
- MST DSC fixes
- Userptr fixes
- FRU and RAS EEPROM fixes
- VCN 4.x RAS support
- Aldrebaran CU occupancy reporting fix
- PSP ring cleanup

amdkfd:
- Memory limit fix
- Enable cooperative launch on gfx 10.3

amd-drm-next-6.2-2022-11-11:

amdgpu:
- SMU 13.x updates
- GPUVM TLB race fix
- DCN 3.1.4 updates
- DCN 3.2.x updates
- PSR fixes
- Kerneldoc fix
- Vega10 fan fix
- GPUVM locking fixes in error pathes
- BACO fix for Beige Goby
- EEPROM I2C address cleanup
- GFXOFF fix
- Fix DC memory leak in error pathes
- Flexible array updates
- Mtype fix for GPUVM PTEs
- Move Kconfig into amdgpu directory
- SR-IOV updates
- Fix possible memory leak in CS IOCTL error path

amdkfd:
- Fix possible memory overrun
- CRIU fixes

radeon:
- ACPI ref count fix
- HDA audio notifier support
- Move Kconfig into radeon directory

UAPI:
- Add new GEM_CREATE flags to help to transition more KFD functionality to the DRM UAPI.
  These are used internally in the driver to align location based memory coherency
  requirements from memory allocated in the KFD with how we manage GPUVM PTEs.  They
  are currently blocked in the GEM_CREATE IOCTL as we don't have a user right now.
  They are just used internally in the kernel driver for now for existing KFD memory
  allocations. So a change to the UAPI header, but no functional change in the UAPI.

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118170807.6505-1-alexander.deucher@amd.comSigned-off-by: Dave Airlie <airlied@redhat.com>

please pull the following etnaviv changes for the next merge window.
Mostly some small workarounds to get new hardware support going. But
also more fixes to the softpin MMU handling and a nice addition from
Christian to make the kernel logs on hang detection more useful.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/adcb1b3dec89a18d6c3c4ee6e179b9b2c9f25046.camel@pengutronix.de

drm-misc-next for 6.2:

UAPI Changes:

Cross-subsystem Changes:
- fbdev: Add support for the nomodeset kernel parameter

Core Changes:
- client: Add kunit tests for drm_connector_pick_cmdline_mode()
- dma-buf: Move dma_buf_mmap_internal() to new locking specification
- edid: Dump EDID on drm_edid_get_panel_id() failure, Stop using a
  temporary device to load the EDID through the firmware mechanism
- fb-helper: Remove damage worker
- gem-vram: Fix deadlock in drm_gem_vram_vmap()
- modes: Named mode parsing improvements
- tests: Add Kunit helpers to create a DRM device

Driver Changes:
- hisilicon: convert to drm_mode_init()
- malidp: Use drm-managed resources
- msm: convert to drm_mode_init() and drm_mode_copy()
- mtk: convert to drm_mode_init()
- nouveau: Support backlight control for nva3
- rockchip: convert to drm_mode_copy()
- sti: convert to drm_mode_copy()
- v3d: Switch to drm-managed resources
- vc4: Fix potential NULL pointer dereference

- panels:
  - New panel: NewVision NV3051D
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221117083628.mzij5nrbdzokek7c@houat

drmm_mode_config_init() will call drm_mode_create_standard_properties()
and won't check the ret value. When drm_mode_create_standard_properties()
failed due to alloc, property will be a NULL pointer and may causes the
null-ptr-deref. Fix the null-ptr-deref by adding the ret value check.

Found null-ptr-deref while testing insert module bochs:
general protection fault, probably for non-canonical address
    0xdffffc000000000c: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067]
CPU: 3 PID: 249 Comm: modprobe Not tainted 6.1.0-rc1+ #364
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:drm_object_attach_property+0x73/0x3c0 [drm]
Call Trace:
 <TASK>
 __drm_connector_init+0xb6c/0x1100 [drm]
 bochs_pci_probe.cold.11+0x4cb/0x7fe [bochs]
 pci_device_probe+0x17d/0x340
 really_probe+0x1db/0x5d0
 __driver_probe_device+0x1e7/0x250
 driver_probe_device+0x4a/0x120
 __driver_attach+0xcd/0x2c0
 bus_for_each_dev+0x11a/0x1b0
 bus_add_driver+0x3d7/0x500
 driver_register+0x18e/0x320
 do_one_initcall+0xc4/0x3e0
 do_init_module+0x1b4/0x630
 load_module+0x5dca/0x7230
 __do_sys_finit_module+0x100/0x170
 do_syscall_64+0x3f/0x90
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7ff65af9f839

Fixes: 6b4959f4 ("drm/atomic: atomic plane properties")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118021651.2460-1-shangxiaojing@huawei.com

when goto err_free, the object had init, so it should be release when fail.
Signed-off-by: ChunyouTang <tangchunyou@163.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221119064131.364-1-tangchunyou@163.com

Pull tracing/probes fixes from Steven Rostedt:

 - Fix possible NULL pointer dereference on trace_event_file in
   kprobe_event_gen_test_exit()

 - Fix NULL pointer dereference for trace_array in
   kprobe_event_gen_test_exit()

 - Fix memory leak of filter string for eprobes

 - Fix a possible memory leak in rethook_alloc()

 - Skip clearing aggrprobe's post_handler in kprobe-on-ftrace case which
   can cause a possible use-after-free

 - Fix warning in eprobe filter creation

 - Fix eprobe filter creation as it picked the wrong event for the
   fields

* tag 'trace-probes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/eprobe: Fix eprobe filter to make a filter correctly
  tracing/eprobe: Fix warning in filter creation
  kprobes: Skip clearing aggrprobe's post_handler in kprobe-on-ftrace case
  rethook: fix a potential memleak in rethook_alloc()
  tracing/eprobe: Fix memory leak of filter string
  tracing: kprobe: Fix potential null-ptr-deref on trace_array in kprobe_event_gen_test_exit()
  tracing: kprobe: Fix potential null-ptr-deref on trace_event_file in kprobe_event_gen_test_exit()

Pull tracing fixes from Steven Rostedt:

 - Fix polling to block on watermark like the reads do, as user space
   applications get confused when the select says read is available, and
   then the read blocks

 - Fix accounting of ring buffer dropped pages as it is what is used to
   determine if the buffer is empty or not

 - Fix memory leak in tracing_read_pipe()

 - Fix struct trace_array warning about being declared in parameters

 - Fix accounting of ftrace pages used in output at start up.

 - Fix allocation of dyn_ftrace pages by subtracting one from order
   instead of diving it by 2

 - Static analyzer found a case were a pointer being used outside of a
   NULL check (rb_head_page_deactivate())

 - Fix possible NULL pointer dereference if kstrdup() fails in
   ftrace_add_mod()

 - Fix memory leak in test_gen_synth_cmd() and test_empty_synth_event()

 - Fix bad pointer dereference in register_synth_event() on error path

 - Remove unused __bad_type_size() method

 - Fix possible NULL pointer dereference of entry in list 'tr->err_log'

 - Fix NULL pointer deference race if eprobe is called before the event
   setup

* tag 'trace-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing: Fix race where eprobes can be called before the event
  tracing: Fix potential null-pointer-access of entry in list 'tr->err_log'
  tracing: Remove unused __bad_type_size() method
  tracing: Fix wild-memory-access in register_synth_event()
  tracing: Fix memory leak in test_gen_synth_cmd() and test_empty_synth_event()
  ftrace: Fix null pointer dereference in ftrace_add_mod()
  ring_buffer: Do not deactivate non-existant pages
  ftrace: Optimize the allocation for mcount entries
  ftrace: Fix the possible incorrect kernel message
  tracing: Fix warning on variable 'struct trace_array'
  tracing: Fix memory leak in tracing_read_pipe()
  ring-buffer: Include dropped pages in counting dirty patches
  tracing/ring-buffer: Have polling block on watermark

The flag that tells the event to call its triggers after reading the event
is set for eprobes after the eprobe is enabled. This leads to a race where
the eprobe may be triggered at the beginning of the event where the record
information is NULL. The eprobe then dereferences the NULL record causing
a NULL kernel pointer bug.

Test for a NULL record to keep this from happening.

Link: https://lore.kernel.org/linux-trace-kernel/20221116192552.1066630-1-rafaelmendsr@gmail.com/
Link: https://lore.kernel.org/linux-trace-kernel/20221117214249.2addbe10@gandalf.local.home

Cc: Linux Trace Kernel <linux-trace-kernel@vger.kernel.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 7491e2c4 ("tracing: Add a probe that attaches to trace events")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reported-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Pull x86 fixes from Borislav Petkov:

 - Do not hold fpregs lock when inheriting FPU permissions because the
   fpregs lock disables preemption on RT but fpu_inherit_perms() does
   spin_lock_irq(), which, on RT, uses rtmutexes and they need to be
   preemptible.

 - Check the page offset and the length of the data supplied by
   userspace for overflow when specifying a set of pages to add to an
   SGX enclave

* tag 'x86_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Drop fpregs lock before inheriting FPU permissions
  x86/sgx: Add overflow check in sgx_validate_offset_length()

Pull scheduler fixes from Borislav Petkov:

 - Fix a small race on the task's exit path where there's a
   misunderstanding whether the task holds rq->lock or not

 - Prevent processes from getting killed when using deprecated or
   unknown rseq ABI flags in order to be able to fuzz the rseq() syscall
   with syzkaller

* tag 'sched_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Fix race in task_call_func()
  rseq: Use pr_warn_once() when deprecated/unknown ABI flags are encountered

Pull perf fixes from Borislav Petkov:

 - Fix an intel PT erratum where CPUs do not support single range output
   for more than 4K

 - Fix a NULL ptr dereference which can happen after an NMI interferes
   with the event enabling dance in amd_pmu_enable_all()

 - Free the events array too when freeing uncore contexts on CPU online,
   thereby fixing a memory leak

 - Improve the pending SIGTRAP check

* tag 'perf_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/pt: Fix sampling using single range output
  perf/x86/amd: Fix crash due to race between amd_pmu_enable_all, perf NMI and throttling
  perf/x86/amd/uncore: Fix memory leak for events array
  perf: Improve missing SIGTRAP checking

Pull locking fix from Borislav Petkov:

 - Fix a build error with clang 11

* tag 'locking_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking: Fix qspinlock/x86 inline asm error

Pull powerpc fix from Michael Ellerman:

 - Fix writable sections being moved into the rodata region.

Thanks to Nicholas Piggin and Christophe Leroy.

* tag 'powerpc-6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc: Fix writable sections being moved into the rodata region

This reverts commit 5fc586a0.

Needed to restore the fbdev damage worker. There have been bug reports
about locking order [1] and incorrectly takens branches. [2] Restore
the damage worker until these problems have been resovled.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://intel-gfx-ci.01.org/tree/drm-tip/fi-kbl-8809g.html # 1
Link: https://lore.kernel.org/dri-devel/20221115115819.23088-6-tzimmermann@suse.de/T/#m06eedc0a468940e4cbbd14ca026733b639bc445a # 2
Link: https://patchwork.freedesktop.org/patch/msgid/20221118133535.9739-4-tzimmermann@suse.de

This reverts commit 7f5cc4a3.

Needed to restore the fbdev damage worker. There have been bug reports
about locking order [1] and incorrectly takens branches. [2] Restore
the damage worker until these problems have been resovled.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://intel-gfx-ci.01.org/tree/drm-tip/fi-kbl-8809g.html # 1
Link: https://lore.kernel.org/dri-devel/20221115115819.23088-6-tzimmermann@suse.de/T/#m06eedc0a468940e4cbbd14ca026733b639bc445a # 2
Link: https://patchwork.freedesktop.org/patch/msgid/20221118133535.9739-3-tzimmermann@suse.de

This reverts commit 27c3e945.

Needed to restore the fbdev damage worker. There have been bug reports
about locking order [1] and incorrectly takens branches. [2] Restore
the damage worker until these problems have been resovled.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://intel-gfx-ci.01.org/tree/drm-tip/fi-kbl-8809g.html # 1
Link: https://lore.kernel.org/dri-devel/20221115115819.23088-6-tzimmermann@suse.de/T/#m06eedc0a468940e4cbbd14ca026733b639bc445a # 2
Link: https://patchwork.freedesktop.org/patch/msgid/20221118133535.9739-2-tzimmermann@suse.de