- 14 Jun, 2017 36 commits
-
-
Murali Karicheri authored
commit 791229f1 upstream. Ethernet networking on K2L has been broken since v4.11-rc1. This was caused by commit 32a34441 ("ARM: keystone: dts: fix netcp clocks and add names"). This commit inadvertently moves on-chip static RAM clock to the end of list of clocks provided for netcp. Since keystone PM domain support does not have a list of recognized con_ids, only the first clock in the list comes under runtime PM management. This means the OSR (On-chip Static RAM) clock remains disabled and that broke networking on K2L. The OSR is used by QMSS on K2L as an external linking RAM. However this is a standalone RAM that can be used for non-QMSS usage (as well as from DSP side). So add a SRAM device node for the same and add the OSR clock to the node. Remove the now redundant OSR clock node from netcp. To manage all clocks defined for netCP's use by runtime PM needs keystone generic power domain (genpd) driver support which is under works. Meanwhile, this patch restores K2L networking and is correct irrespective of any future genpd work since OSR is an independent module and not part of NetCP anyway. Signed-off-by:
Murali Karicheri <m-karicheri2@ti.com> Acked-by:
Tero Kristo <t-kristo@ti.com> [nsekhar@ti.com: commit message updates, port to latest mainline] Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Acked-by:
Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric W. Biederman authored
commit c70d9d80 upstream. When I introduced ptracer_cred I failed to consider the weirdness of fork where the task_struct copies the old value by default. This winds up leaving ptracer_cred set even when a process forks and the child process does not wind up being ptraced. Because ptracer_cred is not set on non-ptraced processes whose parents were ptraced this has broken the ability of the enlightenment window manager to start setuid children. Fix this by properly initializing ptracer_cred in ptrace_init_task This must be done with a little bit of care to preserve the current value of ptracer_cred when ptrace carries through fork. Re-reading the ptracer_cred from the ptracing process at this point is inconsistent with how PT_PTRACE_CAP has been maintained all of these years. Tested-by:
Takashi Iwai <tiwai@suse.de> Fixes: 64b875f7 ("ptrace: Capture the ptracer's creds not PT_PTRACE_CAP") Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Cc: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by:
-
Lucas Stach authored
commit 88e2582e upstream. With serdev we might end up with serial ports that have no cdev exported to userspace, as they are used as the bus interface to other devices. In that case serial_match_port() won't be able to find a matching tty_dev. Skip the irq wakeup enabling in that case, as serdev will make sure to keep the port active, as long as there are devices depending on it. Fixes: 8ee3fde0 (tty_port: register tty ports with serdev bus) Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
-
Johan Hovold authored
commit 1e948479 upstream. Make sure to deregister the SPI driver before releasing the tty driver to avoid use-after-free in the SPI remove callback where the tty devices are deregistered. Fixes: 72d4724e ("serial: ifx6x60: Add modem power off function in the platform reboot process") Cc: Jun Chen <jun.d.chen@intel.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Jan Kiszka authored
commit 2c0ac5b4 upstream. After migrating 8250_exar to MSI in 172c33cb, we can get stuck without further interrupts because of the special wake-up event these chips send. They are only cleared by reading INT0. As we fail to do so during startup and shutdown, we can leave the interrupt line asserted, which is fatal with edge-triggered MSIs. Add the required reading of INT0 to startup and shutdown. Also account for the fact that a pending wake-up interrupt means we have to return 1 from exar_handle_irq. Drop the unneeded reading of INT1..3 along with this - those never reset anything. An alternative approach would have been disabling the wake-up interrupt. Unfortunately, this feature (REGB[17] = 1) is not available on the XR17D15X. Fixes: 172c33cb ("serial: exar: Enable MSI support") Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Luis Henriques authored
commit f9797c2f upstream. ftrace_hash is being kfree'ed in ftrace_graph_release(), however the ->buckets field is not. This results in a memory leak that is easily captured by kmemleak: unreferenced object 0xffff880038afe000 (size 8192): comm "trace-cmd", pid 238, jiffies 4294916898 (age 9.736s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff815f561e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff8113964d>] __kmalloc+0x12d/0x1a0 [<ffffffff810bf6d1>] alloc_ftrace_hash+0x51/0x80 [<ffffffff810c0523>] __ftrace_graph_open.isra.39.constprop.46+0xa3/0x100 [<ffffffff810c05e8>] ftrace_graph_open+0x68/0xa0 [<ffffffff8114003d>] do_dentry_open.isra.1+0x1bd/0x2d0 [<ffffffff81140df7>] vfs_open+0x47/0x60 [<ffffffff81150f95>] path_openat+0x2a5/0x1020 [<ffffffff81152d6a>] do_filp_open+0x8a/0xf0 [<ffffffff811411df>] do_sys_open+0x12f/0x200 [<ffffffff811412ce>] SyS_open+0x1e/0x20 [<ffffffff815fa6e0>] entry_SYSCALL_64_fastpath+0x13/0x94 [<ffffffffffffffff>] 0xffffffffffffffff Link: http://lkml.kernel.org/r/20170525152038.7661-1-lhenriques@suse.com Fixes: b9b0c831 ("ftrace: Convert graph filter to use hash tables") Signed-off-by:
Luis Henriques <lhenriques@suse.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Jane Chu authored
[ Upstream commit c79a1373 ] Linux SPARC64 limits NR_CPUS to 4064 because init_cpu_send_mondo_info() only allocates a single page for NR_CPUS mondo entries. Thus we cannot use all 4096 CPUs on some SPARC platforms. To fix, allocate (2^order) pages where order is set according to the size of cpu_list for possible cpus. Since cpu_list_pa and cpu_mondo_block_pa are not used in asm code, there are no imm13 offsets from the base PA that will break because they can only reach one page. Orabug: 25505750 Signed-off-by:
Jane Chu <jane.chu@oracle.com> Reviewed-by:
Bob Picco <bob.picco@oracle.com> Reviewed-by:
Atish Patra <atish.patra@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Pavel Tatashin authored
[ Upstream commit 0197e41c ] The old method that is using xcall and softint to get new context id is deleted, as it is replaced by a method of using per_cpu_secondary_mm without xcall to perform the context wrap. Signed-off-by:
Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by:
Steven Sistare <steven.sistare@oracle.com> Signed-off-by:
-
Pavel Tatashin authored
[ Upstream commit a0582f26 ] The current wrap implementation has a race issue: it is called outside of the ctx_alloc_lock, and also does not wait for all CPUs to complete the wrap. This means that a thread can get a new context with a new version and another thread might still be running with the same context. The problem is especially severe on CPUs with shared TLBs, like sun4v. I used the following test to very quickly reproduce the problem: - start over 8K processes (must be more than context IDs) - write and read values at a memory location in every process. Very quickly memory corruptions start happening, and what we read back does not equal what we wrote. Several approaches were explored before settling on this one: Approach 1: Move smp_new_mmu_context_version() inside ctx_alloc_lock, and wait for every process to complete the wrap. (Note: every CPU must WAIT before leaving smp_new_mmu_context_version_client() until every one arrives). This approach ends up with deadlocks, as some threads own locks which other threads are waiting for, and they never receive softint until these threads exit smp_new_mmu_context_version_client(). Since we do not allow the exit, deadlock happens. Approach 2: Handle wrap right during mondo interrupt. Use etrap/rtrap to enter into into C code, and issue new versions to every CPU. This approach adds some overhead to runtime: in switch_mm() we must add some checks to make sure that versions have not changed due to wrap while we were loading the new secondary context. (could be protected by PSTATE_IE but that degrades performance as on M7 and older CPUs as it takes 50 cycles for each access). Also, we still need a global per-cpu array of MMs to know where we need to load new contexts, otherwise we can change context to a thread that is going way (if we received mondo between switch_mm() and switch_to() time). Finally, there are some issues with window registers in rtrap() when context IDs are changed during CPU mondo time. The approach in this patch is the simplest and has almost no impact on runtime. We use the array with mm's where last secondary contexts were loaded onto CPUs and bump their versions to the new generation without changing context IDs. If a new process comes in to get a context ID, it will go through get_new_mmu_context() because of version mismatch. But the running processes do not need to be interrupted. And wrap is quicker as we do not need to xcall and wait for everyone to receive and complete wrap. Signed-off-by:
-
Pavel Tatashin authored
[ Upstream commit 7a5b4bbf ] The new wrap is going to use information from this array to figure out mm's that currently have valid secondary contexts setup. Signed-off-by:
-
Pavel Tatashin authored
[ Upstream commit c4415235 ] CTX_FIRST_VERSION defines the first context version, but also it defines first context. This patch redefines it to only include the first context version. Signed-off-by:
-
Pavel Tatashin authored
[ Upstream commit 14d0334c ] The only difference between these two functions is that in activate_mm we unconditionally flush context. However, there is no need to keep this difference after fixing a bug where cpumask was not reset on a wrap. So, in this patch we combine these. Signed-off-by:
-
Pavel Tatashin authored
[ Upstream commit 58897485 ] After a wrap (getting a new context version) a process must get a new context id, which means that we would need to flush the context id from the TLB before running for the first time with this ID on every CPU. But, we use mm_cpumask to determine if this process has been running on this CPU before, and this mask is not reset after a wrap. So, there are two possible fixes for this issue: 1. Clear mm cpumask whenever mm gets a new context id 2. Unconditionally flush context every time process is running on a CPU This patch implements the first solution Signed-off-by:
-
Liam R. Howlett authored
[ Upstream commit f322980b ] hugetlb_bad_size needs to be called on invalid values. Also change the pr_warn to a pr_err to better align with other platforms. Signed-off-by:
Liam R. Howlett <Liam.Howlett@Oracle.com> Signed-off-by:
-
James Clarke authored
[ Upstream commit c982aa9c ] VIO devices were being looked up by their index in the machine description node block, but this often varies over time as devices are added and removed. Instead, store the ID and look up using the type, config handle and ID. Signed-off-by:
James Clarke <jrtc27@jrtc27.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=112541Signed-off-by:
-
Mike Kravetz authored
[ Upstream commit 654f4807 ] When a TSB grows beyond its current capacity, a new TSB is allocated and copy_tsb is called to copy entries from the old TSB to the new. A hash shift based on page size is used to calculate the index of an entry in the TSB. copy_tsb has hard coded PAGE_SHIFT in these calculations. However, for huge page TSBs the value REAL_HPAGE_SHIFT should be used. As a result, when copy_tsb is called for a huge page TSB the entries are placed at the incorrect index in the newly allocated TSB. When doing hardware table walk, the MMU does not match these entries and we end up in the TSB miss handling code. This code will then create and write an entry to the correct index in the TSB. We take a performance hit for the table walk miss and recreation of these entries. Pass a new parameter to copy_tsb that is the page size shift to be used when copying the TSB. Suggested-by:
Anthony Yznaga <anthony.yznaga@oracle.com> Signed-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by:
-
David S. Miller authored
[ Upstream commit 1b4af13f ] Reported-by:
Waldemar Brodkorb <wbx@openadk.org> Signed-off-by:
-
Niklas Cassel authored
[ Upstream commit 426849e6 ] stmmac_tso_allocator can fail to set the Last Descriptor bit on a descriptor that actually was the last descriptor. This happens when the buffer of the last descriptor ends up having a size of exactly TSO_MAX_BUFF_SIZE. When the IP eventually reaches the next last descriptor, which actually has the bit set, the DMA will hang. When the DMA hangs, we get a tx timeout, however, since stmmac does not do a complete reset of the IP in stmmac_tx_timeout, we end up in a state with completely hung TX. Signed-off-by:
Niklas Cassel <niklas.cassel@axis.com> Acked-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by:
Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by:
-
Max Filippov authored
[ Upstream commit d220b942 ] ethoc_reset enables device interrupts, ethoc_interrupt may schedule a NAPI poll before NAPI is enabled in the ethoc_open, which results in device being unable to send or receive anything until it's closed and reopened. In case the device is flooded with ingress packets it may be unable to recover at all. Move napi_enable above ethoc_reset in the ethoc_open to fix that. Fixes: a1702857 ("net: Add support for the OpenCores 10/100 Mbps Ethernet MAC.") Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Reviewed-by:
Tobias Klauser <tklauser@distanz.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit 1020ce31 ] We might call br_afspec() with p == NULL which is a valid use case if the action is on the bridge device itself, but the bridge tunnel code dereferences the p pointer without checking, so check if p is null first. Reported-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Fixes: efa5356b ("bridge: per vlan dst_metadata netlink support") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Eugeniu Rosca authored
[ Upstream commit 79514ef6 ] Commit a47b70ea ("ravb: unmap descriptors when freeing rings") has introduced the issue seen in [1] reproduced on H3ULCB board. Fix this by relocating the RX skb ringbuffer free operation, so that swiotlb page unmapping can be done first. Freeing of aligned TX buffers is not relevant to the issue seen in [1]. Still, reposition TX free calls as well, to have all kfree() operations performed consistently _after_ dma_unmap_*()/dma_free_*(). [1] Console screenshot with the problem reproduced: salvator-x login: root root@salvator-x:~# ifconfig eth0 up Micrel KSZ9031 Gigabit PHY e6800000.ethernet-ffffffff:00: \ attached PHY driver [Micrel KSZ9031 Gigabit PHY] \ (mii_bus:phy_addr=e6800000.ethernet-ffffffff:00, irq=235) IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready root@salvator-x:~# root@salvator-x:~# ifconfig eth0 down ================================================================== BUG: KASAN: use-after-free in swiotlb_tbl_unmap_single+0xc4/0x35c Write of size 1538 at addr ffff8006d884f780 by task ifconfig/1649 CPU: 0 PID: 1649 Comm: ifconfig Not tainted 4.12.0-rc4-00004-g112eb072 #32 Hardware name: Renesas H3ULCB board based on r8a7795 (DT) Call trace: [<ffff20000808f11c>] dump_backtrace+0x0/0x3a4 [<ffff20000808f4d4>] show_stack+0x14/0x1c [<ffff20000865970c>] dump_stack+0xf8/0x150 [<ffff20000831f8b0>] print_address_description+0x7c/0x330 [<ffff200008320010>] kasan_report+0x2e0/0x2f4 [<ffff20000831eac0>] check_memory_region+0x20/0x14c [<ffff20000831f054>] memcpy+0x48/0x68 [<ffff20000869ed50>] swiotlb_tbl_unmap_single+0xc4/0x35c [<ffff20000869fcf4>] unmap_single+0x90/0xa4 [<ffff20000869fd14>] swiotlb_unmap_page+0xc/0x14 [<ffff2000080a2974>] __swiotlb_unmap_page+0xcc/0xe4 [<ffff2000088acdb8>] ravb_ring_free+0x514/0x870 [<ffff2000088b25dc>] ravb_close+0x288/0x36c [<ffff200008aaf8c4>] __dev_close_many+0x14c/0x174 [<ffff200008aaf9b4>] __dev_close+0xc8/0x144 [<ffff200008ac2100>] __dev_change_flags+0xd8/0x194 [<ffff200008ac221c>] dev_change_flags+0x60/0xb0 [<ffff200008ba2dec>] devinet_ioctl+0x484/0x9d4 [<ffff200008ba7b78>] inet_ioctl+0x190/0x194 [<ffff200008a78c44>] sock_do_ioctl+0x78/0xa8 [<ffff200008a7a128>] sock_ioctl+0x110/0x3c4 [<ffff200008365a70>] vfs_ioctl+0x90/0xa0 [<ffff200008365dbc>] do_vfs_ioctl+0x148/0xc38 [<ffff2000083668f0>] SyS_ioctl+0x44/0x74 [<ffff200008083770>] el0_svc_naked+0x24/0x28 The buggy address belongs to the page: page:ffff7e001b6213c0 count:0 mapcount:0 mapping: (null) index:0x0 flags: 0x4000000000000000() raw: 4000000000000000 0000000000000000 0000000000000000 00000000ffffffff raw: 0000000000000000 ffff7e001b6213e0 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8006d884f680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8006d884f700: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff8006d884f780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff8006d884f800: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8006d884f880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Disabling lock debugging due to kernel taint root@salvator-x:~# Fixes: a47b70ea ("ravb: unmap descriptors when freeing rings") Signed-off-by:
Eugeniu Rosca <erosca@de.adit-jv.com> Acked-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Richard Haines authored
[ Upstream commit e3ebdb20 ] When using CALIPSO with IPPROTO_UDP it is possible to trigger a GPF as the IP header may have moved. Also update the payload length after adding the CALIPSO option. Signed-off-by:
Richard Haines <richard_c_haines@btinternet.com> Acked-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
Huw Davies <huw@codeweavers.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 77d4b1d3 ] Alexander reported various KASAN messages triggered in recent kernels The problem is that ping sockets should not use udp_poll() in the first place, and recent changes in UDP stack finally exposed this old bug. Fixes: c319b4d7 ("net: ipv4: add IPPROTO_ICMP socket kind") Fixes: 6d0bfe22 ("net: ipv6: Add IPv6 support to the ping socket.") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Sasha Levin <alexander.levin@verizon.com> Cc: Solar Designer <solar@openwall.com> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: Lorenzo Colitti <lorenzo@google.com> Acked-By:
Lorenzo Colitti <lorenzo@google.com> Tested-By:
-
Florian Fainelli authored
[ Upstream commit b07ac989 ] Commit 9520ed8f ("net: dsa: use cpu_switch instead of ds[0]") replaced the use of dst->ds[0] with dst->cpu_switch since that is functionally equivalent, however, we can now run into an use after free scenario after unbinding then rebinding the switch driver. The use after free happens because we do correctly initialize dst->cpu_switch the first time we probe in dsa_cpu_parse(), then we unbind the driver: dsa_dst_unapply() is called, and we rebind again. dst->cpu_switch now points to a freed "ds" structure, and so when we finally dereference it in dsa_cpu_port_ethtool_setup(), we oops. To fix this, simply set dst->cpu_switch to NULL in dsa_dst_unapply() which guarantees that we always correctly re-assign dst->cpu_switch in dsa_cpu_parse(). Fixes: 9520ed8f ("net: dsa: use cpu_switch instead of ds[0]") Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
David S. Miller authored
[ Upstream commit e3e86b51 ] If ip6_find_1stfragopt() fails and we return an error we have to free up 'segs' because nobody else is going to. Fixes: 2423496a ("ipv6: Prevent overrun when parsing v6 header options") Reported-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Eric Garver authored
[ Upstream commit 9a1c44d9 ] Since commit 9b4437a5 ("geneve: Unify LWT and netdev handling.") when using COLLECT_METADATA geneve devices are created with too small of a needed_headroom and too large of a max_mtu. This is because ip_tunnel_info_af() is not valid with the device level info when using COLLECT_METADATA and we mistakenly fall into the IPv4 case. For COLLECT_METADATA, always use the worst case of ipv6 since both sockets are created. Fixes: 9b4437a5 ("geneve: Unify LWT and netdev handling.") Signed-off-by:
Eric Garver <e@erig.me> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
Soheil Hassas Yeganeh authored
[ Upstream commit 38b25793 ] Prior to f5f99309 (sock: do not set sk_err in sock_dequeue_err_skb), sk_err was reset to the error of the skb on the head of the error queue. Applications, most notably ping, are relying on this behavior to reset sk_err for ICMP packets. Set sk_err to the ICMP error when there is an ICMP packet at the head of the error queue. Fixes: f5f99309 (sock: do not set sk_err in sock_dequeue_err_skb) Reported-by:
Cyril Hrubis <chrubis@suse.cz> Tested-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Liam McBirnie authored
[ Upstream commit 5f733ee6 ] ip6_route_output() requires that the flowlabel contains the traffic class for policy routing. Commit 0e9a7095 ("ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets") removed the code which previously added the traffic class to the flowlabel. The traffic class is added here because only route lookup needs the flowlabel to contain the traffic class. Fixes: 0e9a7095 ("ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets") Signed-off-by:
Liam McBirnie <liam.mcbirnie@boeing.com> Acked-by:
Peter Dawson <peter.a.dawson@boeing.com> Signed-off-by:
-
Mark Bloch authored
[ Upstream commit a53cb29b ] Adding a vxlan interface to a socket isn't symmetrical, while adding is done in vxlan_open() the deletion is done in vxlan_dellink(). This can cause a use-after-free error when we close the vxlan interface before deleting it. We add vxlan_vs_del_dev() to match vxlan_vs_add_dev() and call it from vxlan_stop() to match the call from vxlan_open(). Fixes: 56ef9c90 ("vxlan: Move socket initialization to within rtnl scope") Acked-by:
Jiri Benc <jbenc@redhat.com> Tested-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
Mark Bloch <markb@mellanox.com> Acked-by:
-
Yuchung Cheng authored
[ Upstream commit 44abafc4 ] When the sender switches its congestion control during loss recovery, if the recovery is spurious then it may incorrectly revert cwnd and ssthresh to the older values set by a previous congestion control. Consider a congestion control (like BBR) that does not use ssthresh and keeps it infinite: the connection may incorrectly revert cwnd to an infinite value when switching from BBR to another congestion control. This patch fixes it by disallowing such cwnd undo operation upon switching congestion control. Note that undo_marker is not reset s.t. the packets that were incorrectly marked lost would be corrected. We only avoid undoing the cwnd in tcp_undo_cwnd_reduction(). Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Ganesh Goudar authored
[ Upstream commit e7519f99 ] Take uld mutex to avoid race between cxgb_up() and cxgb4_register_uld() to enable napi for the same uld queue. Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Ben Hutchings authored
[ Upstream commit 6e80ac5c ] xfrm6_find_1stfragopt() may now return an error code and we must not treat it as a length. Fixes: 2423496a ("ipv6: Prevent overrun when parsing v6 header options") Signed-off-by:
Craig Gallek <kraig@google.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit d31353cd ] On SYSTEMPORT Lite, since we have the main interrupt source in the first cell, the second cell is the Wake-on-LAN interrupt, yet the code was not properly updated to fetch the second cell, and instead looked at the third and non-existing cell for Wake-on-LAN. Fixes: 44a4524c ("net: systemport: Add support for SYSTEMPORT Lite") Signed-off-by:
-
Lance Richardson authored
[ Upstream commit 35cf2845 ] After commit 0c1d70af ("net: use dst_cache for vxlan device"), cached dst entries could be leaked when more than one remote was present for a given vxlan_fdb entry, causing subsequent netns operations to block indefinitely and "unregister_netdevice: waiting for lo to become free." messages to appear in the kernel log. Fix by properly releasing cached dst and freeing resources in this case. Fixes: 0c1d70af ("net: use dst_cache for vxlan device") Signed-off-by:
Lance Richardson <lrichard@redhat.com> Acked-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit aeb07324 ] When the transition of NO_STP -> KERNEL_STP was fixed by always calling mod_timer in br_stp_start, it introduced a new regression which causes the timer to be armed even when the bridge is down, and since we stop the timers in its ndo_stop() function, they never get disabled if the device is destroyed before it's upped. To reproduce: $ while :; do ip l add br0 type bridge hello_time 100; brctl stp br0 on; ip l del br0; done; CC: Xin Long <lucien.xin@gmail.com> CC: Ivan Vecera <cera@cera.cz> CC: Sebastian Ott <sebott@linux.vnet.ibm.com> Reported-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Fixes: 6d18c732 ("bridge: start hello_timer when enabling KERNEL_STP in br_stp_start") Signed-off-by:
-
Mintz, Yuval authored
[ Upstream commit 3968d389 ] Apparently multi-cos isn't working for bnx2x quite some time - driver implements ndo_select_queue() to allow queue-selection for FCoE, but the regular L2 flow would cause it to modulo the fallback's result by the number of queues. The fallback would return a queue matching the needed tc [via __skb_tx_hash()], but since the modulo is by the number of TSS queues where number of TCs is not accounted, transmission would always be done by a queue configured into using TC0. Fixes: ada7c19e ("bnx2x: use XPS if possible for bnx2x_select_queue instead of pure hash") Signed-off-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by:
-
- 07 Jun, 2017 4 commits
-
-
Greg Kroah-Hartman authored
-
Jan Kara authored
commit d7fd2425 upstream. There is an off-by-one error in loop termination conditions in xfs_find_get_desired_pgoff() since 'end' may index a page beyond end of desired range if 'endoff' is page aligned. It doesn't have any visible effects but still it is good to fix it. Signed-off-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Eric Sandeen authored
commit a4d768e7 upstream. This structure copy was throwing unaligned access warnings on sparc64: Kernel unaligned access at TPC[1043c088] xfs_btree_visit_blocks+0x88/0xe0 [xfs] xfs_btree_copy_ptrs does a memcpy, which avoids it. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Reviewed-by:
-
Darrick J. Wong authored
commit 3ecb3ac7 upstream. If a malicious user corrupts the refcount btree to cause a cycle between different levels of the tree, the next mount attempt will deadlock in the CoW recovery routine while grabbing buffer locks. We can use the ability to re-grab a buffer that was previous locked to a transaction to avoid deadlocks, so do that here. Signed-off-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
-
