- 17 Jul, 2015 39 commits
-
-
Philipp Zabel authored
The queue owner will be used by videobuf2 trace events to determine and record the device minor number. It is set in v4l2_m2m_reqbufs instead of v4l2_m2m_ioctl_reqbufs because several drivers implement their own vidioc_reqbufs handlers that still call v4l2_m2m_reqbufs directly. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Philipp Zabel authored
Trace events with exactly the same parameters and trace output, such as v4l2_qbuf and v4l2_dqbuf, are supposed to use the DECLARE_EVENT_CLASS and DEFINE_EVENT macros instead of duplicated TRACE_EVENT macro calls. Suggested-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Philipp Zabel authored
The chroma interleaved NV12 format has higher memory bandwidth efficiency because the chroma planes can be read/written with longer burst lengths. Use NV12 as default format if available and consistently sort it first. Signed-off-by:
-
Philipp Zabel authored
Storing internal frames in macroblock tiled order improves memory access patterns by allowing increased burst sizes when transferring the uncompressed macroblocks to or from main memory. The translation logic only supports a single chroma base address, so this is only supported for the chroma interleaved NV12 format. Since the rotator used to copy the decoder output into the v4l2 capture buffers does not seem to support the tiled format correctly, only enable it in the encoder for now. Signed-off-by:
-
Philipp Zabel authored
The frame cache should be set up correctly to encode NV12 source frames. This was not done before, so move the cache setup out of start_decoding into its own function and call it from both start_encoding and start_decoding. Signed-off-by:
-
Philipp Zabel authored
The encoder needs to know the nominal framerate for the constant bitrate control mechanism to work. Currently the only way to set the framerate is by using VIDIOC_S_PARM on the output queue. Signed-off-by:
-
Philipp Zabel authored
The encoder allows to specify the VBV model reference decoder's initial delay and buffer size. Export the corresponding V4L2 controls. Signed-off-by:
-
Philipp Zabel authored
On i.MX6, sometimes after decoding a stream, encoding will produce macroblock errors caused by missing 8-byte sequences in the output stream. Until the cause for this is found, reset the hardware after sequence end, which seems to help. Signed-off-by:
-
Philipp Zabel authored
Keep count of number of buffer meta structures in the list and use a separate spinlock for operations on this counted list instead of reusing the bitstream mutex in some places and none at all in others. Signed-off-by:
-
Philipp Zabel authored
The v4l2_m2m_num_src_bufs_ready() function is called in multiple places in coda_cob_ready, and there already is a variable src_bufs that is assigned to its result. Move it to the beginning and use it everywhere. Signed-off-by:
-
Philipp Zabel authored
Trace events with exactly the same parameters and trace output, such as coda_enc_pic_run and coda_enc_pic_done, are supposed to use the DECLARE_EVENT_CLASS and DEFINE_EVENT macros instead of duplicated TRACE_EVENT macro calls. This patch changes the order of parameters to coda_dec_rot_done and adds a timestamp so it can share an event class with coda_bit_queue. Signed-off-by:
-
Philipp Zabel authored
Since commit ba300204 ("[media] v4l2-ioctl: fill in the description for VIDIOC_ENUM_FMT"), all pixel formats are assigned their description in a central place. We can now drop the custom list. Signed-off-by:
-
Philipp Zabel authored
Otherwise a restarted stream won't queue buffers. Signed-off-by:
-
Philipp Zabel authored
Allow coda_seq_end_work to be called multiple times, move the setting of ctx->initialized from coda_start/stop_streaming() into coda_start_encoding/decoding and coda_seq_end_work, respectively, and skip the SEQ_END command in coda_seq_end_work if the context is already deinitialized before. Signed-off-by:
-
Philipp Zabel authored
In stream end mode the hardware will read the bitstream to its end, overshooting the write pointer. Do not write additional data into the bitstream in this mode. Signed-off-by:
-
Philipp Zabel authored
All decoder instances using the BIT processor should preload buffers into the bitstream ring buffer, including MPEG4 decoding. Fix this by explicitly stating the above condition instead of listing all relevant input formats. Signed-off-by:
-
Philipp Zabel authored
The mvcol buffer is allocated at the end of the first internal buffer. This patch fixes an out of bounds array access. Signed-off-by:
-
Lucas Stach authored
This is already done for one side of the comparison with the expectation that the HW counter rolls over at the 16 bit boundary. This is true when decoding a h.264 stream, but doesn't hold for at least MJPEG. As we don't know the exact wrap-around point for this format just clamp the HW counter to the same 16 bits. This should be enough to detect most of the errors and saves us from doing different comparisons based on the decoded format. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
-
Laurent Pinchart authored
The vsp1_entity_is_streaming() function is called in atomic context when queuing buffers, and sleeps due to a mutex. As the mutex just protects access to one structure field, fix this by replace the mutex with a spinlock. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
The checks need to be performed on up to two planes, as the third plane, if present, must have the same stride and size as the second plane. The code incorrectly performs the checks on at least two planes instead of at most two planes, fix it. Signed-off-by:
-
Dan Carpenter authored
We should set "ret" on this error path instead of returning success. Fixes: df330515 ('[media] v4l: xilinx: Add Xilinx Video IP core') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Hyun Kwon <hyun.kwon@xilinx.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Mats Randgaard authored
The driver is tested on our hardware and all the implemented features works as expected. Missing features: - CEC support - HDCP repeater support - IR support Signed-off-by:
Mats Randgaard <matrandg@cisco.com> [hans.verkuil@cisco.com: updated copyright year to 2015] [hans.verkuil@cisco.com: update confusing confctl_mutex comment] Signed-off-by:
-
Fabien Dessenne authored
bdisp_dev->dbg.copy_node shall be a copy of (and not point to) bdisp_ctx->node, since this resource is freed upon driver release. Signed-off-by:
Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by:
-
Fabien Dessenne authored
Add this missing debug information Signed-off-by:
-
Fabien Dessenne authored
Support the composing (at VIDEO_CAPTURE) with the _selection API. v4l2-compliance successfully run ("test Composing: OK") Signed-off-by: -
Ezequiel Garcia authored
This commit implements frame decimation for stk1160, which allows to support format changes instead of a static frame size. The stk1160 supports independent row and column decimation, in two different modes: * set a number of rows/columns units to skip for each unit sent. * set a number of rows/columns units to send for each unit skipped. This effectively allows to achieve different frame scaling ratios. The unit number can be set to either two row/columns sent/skipped, or four row/columns sent/skipped. Since the video format (UYVY) has 4-bytes, using a unit number of two row/columns results in frame color 'shifting', so set to four row/columns sent/skipped. Signed-off-by:
Michael Stegemann <michael@stegemann.it> Signed-off-by:
Dale Hamel <dale.hamel@srvthe.net> Signed-off-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by:
-
Ezequiel Garcia authored
These messages are not really informational, and just makes the driver's output too verbose. This commit changes some messages to a debug level, removes a really useless "driver loaded" message and finally undefines the DEBUG macro. Signed-off-by:
-
Benoit Parrot authored
Upon a S_FMT the input/requested frame size and pixel format is overwritten by the current sub-device settings. Fix this so application can actually set the frame size and format. Fixes: 417d2e50 ("[media] media: platform: add VPFE capture driver support for AM437X") Cc: <stable@vger.kernel.org> # v4.0+ Signed-off-by:
Benoit Parrot <bparrot@ti.com> Acked-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Geert Uytterhoeven authored
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency of VIDEO_ADV7604 and VIDEO_COBALT (the latter selects the former) on GPIOLIB if COMPILE_TEST is enabled. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Hans Verkuil authored
Fix small typo (missing 'it') in the documentation for V4L2_CTRL_FLAG_EXECUTE_ON_WRITE. Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by:
-
Hans Verkuil authored
The documentation had two media_version entries. The second one was a typo and it should be driver_version instead. Correct this. Signed-off-by:
-
Lars-Peter Clausen authored
Use the new v4l2_subdev_notify_event() helper function to deliver the resolution change event to userspace via the v4l2 subdev event queue as well as to the bridge driver using the callback notify mechanism. This allows userspace applications to react to changes in resolution. This is useful and often necessary for video pipelines where there is no direct 1-to-1 relationship between the subdevice converter and the video capture device and hence it does not make sense to directly forward the event to the video capture device node. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> [hans.verkuil@cisco.com: fix obvious mistake: v4l2_event_subdev_unsubscribe -> v4l2_ctrl_subdev_subscribe_event] Signed-off-by:
-
Lars-Peter Clausen authored
Use the new v4l2_subdev_notify_event() helper function to deliver the resolution change event to userspace via the v4l2 subdev event queue as well as to the bridge driver using the callback notify mechanism. This allows userspace applications to react to changes in resolution. This is useful and often necessary for video pipelines where there is no direct 1-to-1 relationship between the subdevice converter and the video capture device and hence it does not make sense to directly forward the event to the video capture device node. Signed-off-by:
-
Lars-Peter Clausen authored
Add a new helper function called v4l2_subdev_notify_event() which will deliver the specified event to both the v4l2 subdev event queue as well as to the notify callback. The former is typically used by userspace applications to listen to notification events while the later is used by bridge drivers. Combining both into the same function avoids boilerplate code in subdev drivers. Signed-off-by:
-
Lars-Peter Clausen authored
Allow userspace applications to subscribe to control change events. This can e.g. be used to monitor the 5V detect control to be notified when a source is connected or disconnected. Signed-off-by:
-
Lars-Peter Clausen authored
Allow userspace applications to subscribe to control change events. This can e.g. be used to monitor the 5V detect control to be notified when a source is connected or disconnected. Signed-off-by:
-
Hans Verkuil authored
If the vdev pointer == NULL, then just return. This makes it easier for subdev drivers to use this function without having to check if the sd->devnode pointer is NULL or not. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Linux 4.2-rc2 We need to backport changeset 31f02455, with fixes a bug at include/linux/compiler.h that breaks sparse. * tag 'v4.2-rc2': (221 commits) Linux 4.2-rc2 Revert "drm/i915: Use crtc_state->active in primary check_plane func" freeing unlinked file indefinitely delayed fix a braino in ovl_d_select_inode() 9p: don't leave a half-initialized inode sitting around tick/broadcast: Prevent NULL pointer dereference selinux: fix mprotect PROT_EXEC regression caused by mm change parisc: Fix some PTE/TLB race conditions and optimize __flush_tlb_range based on timing results stifb: Implement hardware accelerated copyarea nfit: add support for NVDIMM "latch" flag nfit: update block I/O path to use PMEM API tools/testing/nvdimm: add mock acpi_nfit_flush_address entries to nfit_test tools/testing/nvdimm: fix return code for unimplemented commands tools/testing/nvdimm: mock ioremap_wt pmem: add maintainer for include/linux/pmem.h Revert "Input: synaptics - allocate 3 slots to keep stability in image sensors" arm64: entry32: remove pointless register assignment MIPS: O32: Use compat_sys_getsockopt. MIPS: c-r4k: Extend way_string array MIPS: Pistachio: Support CDMM & Fast Debug Channel ...
-
Fabian Frederick authored
Use kernel.h macro definition. Thanks to Julia Lawall for Coccinelle scripting support. Signed-off-by:
Fabian Frederick <fabf@skynet.be> Signed-off-by:
-
- 12 Jul, 2015 1 commit
-
-
Linus Torvalds authored
-
