- 04 May, 2023 2 commits
-
-
Claudio Imbrenda authored
Fix a potential race in gmap_make_secure() and remove the last user of follow_page() without FOLL_GET. The old code is locking something it doesn't have a reference to, and as explained by Jason and David in this discussion: https://lore.kernel.org/linux-mm/Y9J4P%2FRNvY1Ztn0Q@nvidia.com/ it can lead to all kind of bad things, including the page getting unmapped (MADV_DONTNEED), freed, reallocated as a larger folio and the unlock_page() would target the wrong bit. There is also another race with the FOLL_WRITE, which could race between the follow_page() and the get_locked_pte(). The main point is to remove the last use of follow_page() without FOLL_GET or FOLL_PIN, removing the races can be considered a nice bonus. Link: https://lore.kernel.org/linux-mm/Y9J4P%2FRNvY1Ztn0Q@nvidia.com/Suggested-by:
Jason Gunthorpe <jgg@nvidia.com> Fixes: 214d9bbc ("s390/mm: provide memory management functions for protected KVM guests") Reviewed-by:
Claudio Imbrenda <imbrenda@linux.ibm.com> Message-Id: <20230428092753.27913-2-imbrenda@linux.ibm.com>
-
Claudio Imbrenda authored
On machines without the Destroy Secure Configuration Fast UVC, the topmost level of page tables is set aside and freed asynchronously as last step of the asynchronous teardown. Each gmap has a host_to_guest radix tree mapping host (userspace) addresses (with 1M granularity) to gmap segment table entries (pmds). If a guest is smaller than 2GB, the topmost level of page tables is the segment table (i.e. there are only 2 levels). Replacing it means that the pointers in the host_to_guest mapping would become stale and cause all kinds of nasty issues. This patch fixes the issue by disallowing asynchronous teardown for guests with only 2 levels of page tables. Userspace should (and already does) try using the normal destroy if the asynchronous one fails. Update s390_replace_asce so it refuses to replace segment type ASCEs. This is still needed in case the normal destroy VM fails. Fixes: fb491d55 ("KVM: s390: pv: asynchronous destroy for reboot") Reviewed-by:
Marc Hartmayer <mhartmay@linux.ibm.com> Reviewed-by:
Janosch Frank <frankja@linux.ibm.com> Signed-off-by:
-
- 20 Apr, 2023 3 commits
-
-
Nico Boehr authored
When the kvm module is unloaded, zpci_setup_aipb() perists some data in the zpci_aipb structure in s390 pci code. Note that this struct is also passed to firmware in the zpci_set_irq_ctrl() call and thus the GAIT must be a physical address. On module re-insertion, the GAIT is restored from this structure in zpci_reset_aipb(). But it is a physical address, hence this may cause issues when the kvm module is unloaded and loaded again. Fix virtual vs physical address confusion (which currently are the same) by adding the necessary physical-to-virtual-conversion in zpci_reset_aipb(). Signed-off-by:
Nico Boehr <nrb@linux.ibm.com> Reviewed-by:
Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by:
-
Pierre Morel authored
The APCB is part of the CRYCB. The calculation of the APCB origin can be done by adding the APCB offset to the CRYCB origin. Current code makes confusing transformations, converting the CRYCB origin to a pointer to calculate the APCB origin. Let's make things simpler and keep the CRYCB origin to make these calculations. Signed-off-by:
Pierre Morel <pmorel@linux.ibm.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Acked-by:
-
Nico Boehr authored
We sometimes put a virtual address in next_alert, which should always be a physical address, since it is shared with hardware. This currently works, because virtual and physical addresses are the same. Add phys_to_virt() to resolve the virtual-physical confusion. Signed-off-by:
Michael Mueller <mimu@linux.ibm.com> Signed-off-by:
-
- 12 Mar, 2023 12 commits
-
-
Linus Torvalds authored
-
Hector Martin authored
This reverts part of commit 015b8cc5 ("wifi: cfg80211: Fix use after free for wext") This commit broke WPA offload by unconditionally clearing the crypto modes for non-WEP connections. Drop that part of the patch. Signed-off-by:
Hector Martin <marcan@marcan.st> Reported-by:
Ilya <me@0upti.me> Reported-and-tested-by:
Janne Grunau <j@jannau.net> Reviewed-by:
Eric Curtin <ecurtin@redhat.com> Fixes: 015b8cc5 ("wifi: cfg80211: Fix use after free for wext") Cc: stable@kernel.org Link: https://lore.kernel.org/linux-wireless/ZAx0TWRBlGfv7pNl@kroah.com/T/#m11e6e0915ab8fa19ce8bc9695ab288c0fe018edfSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmddLinus Torvalds authored
Pull tpm fixes from Jarkko Sakkinen: "Two additional bug fixes for v6.3" * tag 'tpm-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: tpm: disable hwrng for fTPM on some AMD designs tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address
-
Mario Limonciello authored
AMD has issued an advisory indicating that having fTPM enabled in BIOS can cause "stuttering" in the OS. This issue has been fixed in newer versions of the fTPM firmware, but it's up to system designers to decide whether to distribute it. This issue has existed for a while, but is more prevalent starting with kernel 6.1 because commit b006c439 ("hwrng: core - start hwrng kthread also for untrusted sources") started to use the fTPM for hwrng by default. However, all uses of /dev/hwrng result in unacceptable stuttering. So, simply disable registration of the defective hwrng when detecting these faulty fTPM versions. As this is caused by faulty firmware, it is plausible that such a problem could also be reproduced by other TPM interactions, but this hasn't been shown by any user's testing or reports. It is hypothesized to be triggered more frequently by the use of the RNG because userspace software will fetch random numbers regularly. Intentionally continue to register other TPM functionality so that users that rely upon PCR measurements or any storage of data will still have access to it. If it's found later that another TPM functionality is exacerbating this problem a module parameter it can be turned off entirely and a module parameter can be introduced to allow users who rely upon fTPM functionality to turn it on even though this problem is present. Link: https://www.amd.com/en/support/kb/faq/pa-410 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216989 Link: https://lore.kernel.org/all/20230209153120.261904-1-Jason@zx2c4.com/ Fixes: b006c439 ("hwrng: core - start hwrng kthread also for untrusted sources") Cc: stable@vger.kernel.org Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: Thorsten Leemhuis <regressions@leemhuis.info> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Tested-by: reach622@mailcuk.com Tested-by:
Bell <1138267643@qq.com> Co-developed-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Reviewed-by:
Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by:
-
Morten Linderud authored
tpm_read_log_acpi() should return -ENODEV when no eventlog from the ACPI table is found. If the firmware vendor includes an invalid log address we are unable to map from the ACPI memory and tpm_read_log() returns -EIO which would abort discovery of the eventlog. Change the return value from -EIO to -ENODEV when acpi_os_map_iomem() fails to map the event log. The following hardware was used to test this issue: Framework Laptop (Pre-production) BIOS: INSYDE Corp, Revision: 3.2 TPM Device: NTC, Firmware Revision: 7.2 Dump of the faulty ACPI TPM2 table: [000h 0000 4] Signature : "TPM2" [Trusted Platform Module hardware interface Table] [004h 0004 4] Table Length : 0000004C [008h 0008 1] Revision : 04 [009h 0009 1] Checksum : 2B [00Ah 0010 6] Oem ID : "INSYDE" [010h 0016 8] Oem Table ID : "TGL-ULT" [018h 0024 4] Oem Revision : 00000002 [01Ch 0028 4] Asl Compiler ID : "ACPI" [020h 0032 4] Asl Compiler Revision : 00040000 [024h 0036 2] Platform Class : 0000 [026h 0038 2] Reserved : 0000 [028h 0040 8] Control Address : 0000000000000000 [030h 0048 4] Start Method : 06 [Memory Mapped I/O] [034h 0052 12] Method Parameters : 00 00 00 00 00 00 00 00 00 00 00 00 [040h 0064 4] Minimum Log Length : 00010000 [044h 0068 8] Log Address : 000000004053D000 Fixes: 0cf577a0 ("tpm: Fix handling of missing event log") Tested-by:Erkki Eilonen <erkki@bearmetal.eu> Signed-off-by:
Morten Linderud <morten@linderud.pw> Reviewed-by:
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: - Fix a crash if mount time quotacheck fails when there are inodes queued for garbage collection. - Fix an off by one error when discarding folios after writeback failure. * tag 'xfs-6.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: fix off-by-one-block in xfs_discard_folio() xfs: quotacheck failure can race with background inode inactivation
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes and removal from Greg KH: "Here are four small staging driver fixes, and one big staging driver deletion for 6.3-rc2. The fixes are: - rtl8192e driver fixes for where the driver was attempting to execute various programs directly from the disk for unknown reasons - rtl8723bs driver fixes for issues found by Hans in testing The deleted driver is the removal of the r8188eu wireless driver as now in 6.3-rc1 we have a "real" wifi driver for one that includes support for many many more devices than this old driver did. So it's time to remove it as it is no longer needed. The maintainers of this driver all have acked its removal. Many thanks to them over the years for working to clean it up and keep it working while the real driver was being developed. All of these have been in linux-next this week with no reported problems" * tag 'staging-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: r8188eu: delete driver staging: rtl8723bs: Pass correct parameters to cfg80211_get_bss() staging: rtl8723bs: Fix key-store index handling staging: rtl8192e: Remove call_usermodehelper starting RadioPower.sh staging: rtl8192e: Remove function ..dm_check_ac_dc_power calling a script -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Borislav Petkov: "A single erratum fix for AMD machines: - Disable XSAVES on AMD Zen1 and Zen2 machines due to an erratum. No impact to anything as those machines will fallback to XSAVEC which is equivalent there" * tag 'x86_urgent_for_v6.3_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/CPU/AMD: Disable XSAVES on AMD family 0x17 -
Linus Torvalds authored
Pull clone3 fix from Christian Brauner: "A simple fix for the clone3() system call. The CLONE_NEWTIME allows the creation of time namespaces. The flag reuses a bit from the CSIGNAL bits that are used in the legacy clone() system call to set the signal that gets sent to the parent after the child exits. The clone3() system call doesn't rely on CSIGNAL anymore as it uses a dedicated .exit_signal field in struct clone_args. So we blocked all CSIGNAL bits in clone3_args_valid(). When CLONE_NEWTIME was introduced and reused a CSIGNAL bit we forgot to adapt clone3_args_valid() causing CLONE_NEWTIME with clone3() to be rejected. Fix this" * tag 'kernel.fork.v6.3-rc2' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux: selftests/clone3: test clone3 with CLONE_NEWTIME fork: allow CLONE_NEWTIME in clone3 flags
-
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmappingLinus Torvalds authored
Pull vfs fixes from Christian Brauner: - When allocating pages for a watch queue failed, we didn't return an error causing userspace to proceed even though all subsequent notifcations would be lost. Make sure to return an error. - Fix a misformed tree entry for the idmapping maintainers entry. - When setting file leases from an idmapped mount via generic_setlease() we need to take the idmapping into account otherwise taking a lease would fail from an idmapped mount. - Remove two redundant assignments, one in splice code and the other in locks code, that static checkers complained about. * tag 'vfs.misc.v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: filelocks: use mount idmapping for setlease permission check fs/locks: Remove redundant assignment to cmd splice: Remove redundant assignment to ret MAINTAINERS: repair a malformed T: entry in IDMAPPED MOUNTS watch_queue: fix IOC_WATCH_QUEUE_SET_SIZE alloc error paths
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Bug fixes and regressions for ext4, the most serious of which is a potential deadlock during directory renames that was introduced during the merge window discovered by a combination of syzbot and lockdep" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: zero i_disksize when initializing the bootloader inode ext4: make sure fs error flag setted before clear journal error ext4: commit super block if fs record error when journal record without error ext4, jbd2: add an optimized bmap for the journal inode ext4: fix WARNING in ext4_update_inline_data ext4: move where set the MAY_INLINE_DATA flag is set ext4: Fix deadlock during directory rename ext4: Fix comment about the 64BIT feature docs: ext4: modify the group desc size to 64 ext4: fix another off-by-one fsmap error on 1k block filesystems ext4: fix RENAME_WHITEOUT handling for inline directories ext4: make kobj_type structures constant ext4: fix cgroup writeback accounting with fs-layer encryption
-
Linus Torvalds authored
The cpumask_check() was unnecessarily tight, and causes problems for the users of cpumask_next(). We have a number of users that take the previous return value of one of the bit scanning functions and subtract one to keep it in "range". But since the scanning functions end up returning up to 'small_cpumask_bits' instead of the tighter 'nr_cpumask_bits', the range really needs to be using that widened form. [ This "previous-1" behavior is also the reason we have all those comments about /* -1 is a legal arg here. */ and separate checks for that being ok. So we could have just made "small_cpumask_bits-1" be a similar special "don't check this" value. Tetsuo Handa even suggested a patch that only does that for cpumask_next(), since that seems to be the only actual case that triggers, but that all makes it even _more_ magical and special. So just relax the check ] One example of this kind of pattern being the 'c_start()' function in arch/x86/kernel/cpu/proc.c, but also duplicated in various forms on other architectures. Reported-by: syzbot+96cae094d90877641f32@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=96cae094d90877641f32Reported-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Link: https://lore.kernel.org/lkml/c1f4cc16-feea-b83c-82cf-1a1f007b7eb9@I-love.SAKURA.ne.jp/ Fixes: 596ff4a0 ("cpumask: re-introduce constant-sized cpumask optimizations") Signed-off-by:
-
- 11 Mar, 2023 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c updates from Wolfram Sang: "This marks the end of a transition to let I2C have the same probe semantics as other subsystems. Uwe took care that no drivers in the current tree nor in -next use the deprecated .probe call. So, it is a good time to switch to the new, standard semantics now. There is also a regression fix: - regression fix for the notifier handling of the I2C core - final coversions of drivers away from deprecated .probe - make .probe_new the standard probe and convert I2C core to use it * tag 'i2c-for-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: dev: Fix bus callback return values i2c: Convert drivers to new .probe() callback i2c: mux: Convert all drivers to new .probe() callback i2c: Switch .probe() to not take an id parameter media: i2c: ov2685: convert to i2c's .probe_new() media: i2c: ov5695: convert to i2c's .probe_new() w1: ds2482: Convert to i2c's .probe_new() serial: sc16is7xx: Convert to i2c's .probe_new() mtd: maps: pismo: Convert to i2c's .probe_new() misc: ad525x_dpot-i2c: Convert to i2c's .probe_new()
-
Richard Weinberger authored
Switching to BLK_MQ_F_BLOCKING wrongly removed the call to blk_mq_end_request(). Add it back to have our IOs finished Fixes: 91cc8fbc ("ubi: block: set BLK_MQ_F_BLOCKING") Analyzed-by:
Daniel Palmer <daniel@0x0f.com> Link: https://lore.kernel.org/linux-mtd/CAHk-=wi29bbBNh3RqJKu3PxzpjDN5D5K17gEVtXrb7-6bfrnMQ@mail.gmail.com/Signed-off-by:
Richard Weinberger <richard@nod.at> Reviewed-by:
Christoph Hellwig <hch@lst.de> Tested-by:
-
Zhihao Cheng authored
If the boot loader inode has never been used before, the EXT4_IOC_SWAP_BOOT inode will initialize it, including setting the i_size to 0. However, if the "never before used" boot loader has a non-zero i_size, then i_disksize will be non-zero, and the inconsistency between i_size and i_disksize can trigger a kernel warning: WARNING: CPU: 0 PID: 2580 at fs/ext4/file.c:319 CPU: 0 PID: 2580 Comm: bb Not tainted 6.3.0-rc1-00004-g703695902cfa RIP: 0010:ext4_file_write_iter+0xbc7/0xd10 Call Trace: vfs_write+0x3b1/0x5c0 ksys_write+0x77/0x160 __x64_sys_write+0x22/0x30 do_syscall_64+0x39/0x80 Reproducer: 1. create corrupted image and mount it: mke2fs -t ext4 /tmp/foo.img 200 debugfs -wR "sif <5> size 25700" /tmp/foo.img mount -t ext4 /tmp/foo.img /mnt cd /mnt echo 123 > file 2. Run the reproducer program: posix_memalign(&buf, 1024, 1024) fd = open("file", O_RDWR | O_DIRECT); ioctl(fd, EXT4_IOC_SWAP_BOOT); write(fd, buf, 1024); Fix this by setting i_disksize as well as i_size to zero when initiaizing the boot loader inode. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217159 Cc: stable@kernel.org Signed-off-by:Zhihao Cheng <chengzhihao1@huawei.com> Link: https://lore.kernel.org/r/20230308032643.641113-1-chengzhihao1@huawei.comSigned-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Ye Bin authored
Now, jounral error number maybe cleared even though ext4_commit_super() failed. This may lead to error flag miss, then fsck will miss to check file system deeply. Signed-off-by:
Ye Bin <yebin10@huawei.com> Reviewed-by:
Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230307061703.245965-3-yebin@huaweicloud.com
-
Ye Bin authored
Now, 'es->s_state' maybe covered by recover journal. And journal errno maybe not recorded in journal sb as IO error. ext4_update_super() only update error information when 'sbi->s_add_error_count' large than zero. Then 'EXT4_ERROR_FS' flag maybe lost. To solve above issue just recover 'es->s_state' error flag after journal replay like error info. Signed-off-by:
Baokun Li <libaokun1@huawei.com> Reviewed-by:
-
Theodore Ts'o authored
The generic bmap() function exported by the VFS takes locks and does checks that are not necessary for the journal inode. So allow the file system to set a journal-optimized bmap function in journal->j_bmap. Reported-by: syzbot+9543479984ae9e576000@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=e4aaa78795e490421c79f76ec3679006c8ff4cf0Signed-off-by:
-
Ye Bin authored
Syzbot found the following issue: EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 without journal. Quota mode: none. fscrypt: AES-256-CTS-CBC using implementation "cts-cbc-aes-aesni" fscrypt: AES-256-XTS using implementation "xts-aes-aesni" ------------[ cut here ]------------ WARNING: CPU: 0 PID: 5071 at mm/page_alloc.c:5525 __alloc_pages+0x30a/0x560 mm/page_alloc.c:5525 Modules linked in: CPU: 1 PID: 5071 Comm: syz-executor263 Not tainted 6.2.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 RIP: 0010:__alloc_pages+0x30a/0x560 mm/page_alloc.c:5525 RSP: 0018:ffffc90003c2f1c0 EFLAGS: 00010246 RAX: ffffc90003c2f220 RBX: 0000000000000014 RCX: 0000000000000000 RDX: 0000000000000028 RSI: 0000000000000000 RDI: ffffc90003c2f248 RBP: ffffc90003c2f2d8 R08: dffffc0000000000 R09: ffffc90003c2f220 R10: fffff52000785e49 R11: 1ffff92000785e44 R12: 0000000000040d40 R13: 1ffff92000785e40 R14: dffffc0000000000 R15: 1ffff92000785e3c FS: 0000555556c0d300(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f95d5e04138 CR3: 00000000793aa000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __alloc_pages_node include/linux/gfp.h:237 [inline] alloc_pages_node include/linux/gfp.h:260 [inline] __kmalloc_large_node+0x95/0x1e0 mm/slab_common.c:1113 __do_kmalloc_node mm/slab_common.c:956 [inline] __kmalloc+0xfe/0x190 mm/slab_common.c:981 kmalloc include/linux/slab.h:584 [inline] kzalloc include/linux/slab.h:720 [inline] ext4_update_inline_data+0x236/0x6b0 fs/ext4/inline.c:346 ext4_update_inline_dir fs/ext4/inline.c:1115 [inline] ext4_try_add_inline_entry+0x328/0x990 fs/ext4/inline.c:1307 ext4_add_entry+0x5a4/0xeb0 fs/ext4/namei.c:2385 ext4_add_nondir+0x96/0x260 fs/ext4/namei.c:2772 ext4_create+0x36c/0x560 fs/ext4/namei.c:2817 lookup_open fs/namei.c:3413 [inline] open_last_lookups fs/namei.c:3481 [inline] path_openat+0x12ac/0x2dd0 fs/namei.c:3711 do_filp_open+0x264/0x4f0 fs/namei.c:3741 do_sys_openat2+0x124/0x4e0 fs/open.c:1310 do_sys_open fs/open.c:1326 [inline] __do_sys_openat fs/open.c:1342 [inline] __se_sys_openat fs/open.c:1337 [inline] __x64_sys_openat+0x243/0x290 fs/open.c:1337 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Above issue happens as follows: ext4_iget ext4_find_inline_data_nolock ->i_inline_off=164 i_inline_size=60 ext4_try_add_inline_entry __ext4_mark_inode_dirty ext4_expand_extra_isize_ea ->i_extra_isize=32 s_want_extra_isize=44 ext4_xattr_shift_entries ->after shift i_inline_off is incorrect, actually is change to 176 ext4_try_add_inline_entry ext4_update_inline_dir get_max_inline_xattr_value_size if (EXT4_I(inode)->i_inline_off) entry = (struct ext4_xattr_entry *)((void *)raw_inode + EXT4_I(inode)->i_inline_off); free += EXT4_XATTR_SIZE(le32_to_cpu(entry->e_value_size)); ->As entry is incorrect, then 'free' may be negative ext4_update_inline_data value = kzalloc(len, GFP_NOFS); -> len is unsigned int, maybe very large, then trigger warning when 'kzalloc()' To resolve the above issue we need to update 'i_inline_off' after 'ext4_xattr_shift_entries()'. We do not need to set EXT4_STATE_MAY_INLINE_DATA flag here, since ext4_mark_inode_dirty() already sets this flag if needed. Setting EXT4_STATE_MAY_INLINE_DATA when it is needed may trigger a BUG_ON in ext4_writepages(). Reported-by: syzbot+d30838395804afc2fa6f@syzkaller.appspotmail.com Cc: stable@kernel.org Signed-off-by: -
Ye Bin authored
The only caller of ext4_find_inline_data_nolock() that needs setting of EXT4_STATE_MAY_INLINE_DATA flag is ext4_iget_extra_inode(). In ext4_write_inline_data_end() we just need to update inode->i_inline_off. Since we are going to add one more caller that does not need to set EXT4_STATE_MAY_INLINE_DATA, just move setting of EXT4_STATE_MAY_INLINE_DATA out to ext4_iget_extra_inode(). Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Twenty fixes all in drivers except the one zone storage revalidation fix to sd. The megaraid_sas fixes are more on the level of a driver update (enabling crash dump and increasing lun number) but I thought you could let this slide on -rc1 and the next most extensive update is a load of fixes to mpi3mr" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sd: Fix wrong zone_write_granularity value during revalidate scsi: storvsc: Handle BlockSize change in Hyper-V VHD/VHDX file scsi: megaraid_sas: Driver version update to 07.725.01.00-rc1 scsi: megaraid_sas: Add crash dump mode capability bit in MFI capabilities scsi: megaraid_sas: Update max supported LD IDs to 240 scsi: mpi3mr: Bad drive in topology results kernel crash scsi: mpi3mr: NVMe command size greater than 8K fails scsi: mpi3mr: Return proper values for failures in firmware init path scsi: mpi3mr: Wait for diagnostic save during controller init scsi: mpi3mr: Driver unload crashes host when enhanced logging is enabled scsi: mpi3mr: ioctl timeout when disabling/enabling interrupt scsi: lpfc: Avoid usage of list iterator variable after loop scsi: lpfc: Check kzalloc() in lpfc_sli4_cgn_params_read() scsi: ufs: mcq: qcom: Clean the return path of ufs_qcom_mcq_config_resource() scsi: ufs: mcq: qcom: Fix passing zero to PTR_ERR scsi: ufs: ufs-qcom: Remove impossible check scsi: ufs: core: Add soft dependency on governor_simpleondemand scsi: hisi_sas: Check devm_add_action() return value scsi: qla2xxx: Add option to disable FC2 Target support scsi: target: iscsi: Fix an error message in iscsi_check_key()
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull block fixes from Jens Axboe: - Fix a regression in exclusive mode handling of the partition code, introduced in this merge windoe (Yu) - Fix for a use-after-free in BFQ (Yu) - Add sysfs documentation for the 'hidden' attribute (Sagi) * tag 'block-6.3-2023-03-09' of git://git.kernel.dk/linux: block, bfq: fix uaf for 'stable_merge_bfqq' docs: sysfs-block: document hidden sysfs entry block: fix wrong mode for blkdev_put() from disk_scan_partitions()
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull put_and_unmap_page() helper from Al Viro: "kmap_local_page() conversions in local filesystems keep running into kunmap_local_page()+put_page() combinations. We can keep inventing names for identical inline helpers, but it's getting rather inconvenient. I've added a trivial helper to linux/highmem.h instead. I would've held that back until the merge window, if not for the mess it causes in tree topology - I've several branches merging from that one, and it's only going to get worse if e.g. ext2 stuff gets picked by Jan" * tag 'pull-highmem' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: new helper: put_and_unmap_page()
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull misc fixes from Al Viro: "pick_file() speculation fix + fix for alpha mis(merge,cherry-pick) The fs/file.c one is a genuine missing speculation barrier in pick_file() (reachable e.g. via close(2)). The alpha one is strictly speaking not a bug fix, but only because confusion between preempt_enable() and preempt_disable() is harmless on architecture without CONFIG_PREEMPT. Looks like alpha.git picked the wrong version of patch - that braino used to be there in early versions, but it had been fixed quite a while ago..." * tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: prevent out-of-bounds array speculation when closing a file descriptor alpha: fix lazy-FPU mis(merged/applied/whatnot)
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull thermal control fix from Rafael Wysocki: "Fix a recently introduced deadlock in the int340x thermal control driver (Srinivas Pandruvada)" * tag 'thermal-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: intel: int340x: processor_thermal: Fix deadlock
-
- 10 Mar, 2023 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: - RISC-V architecture-specific ELF attributes have been disabled in the kernel builds - A fix for a locking failure while during errata patching that manifests on SiFive-based systems - A fix for a KASAN failure during stack unwinding - A fix for some lockdep failures during text patching * tag 'riscv-for-linus-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: Don't check text_mutex during stop_machine riscv: Use READ_ONCE_NOCHECK in imprecise unwinding stack mode RISC-V: fix taking the text_mutex twice during sifive errata patching RISC-V: Stop emitting attributes
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Weekly fixes. msm and amdgpu are the vast majority of these, otherwise some straggler misc from last week for nouveau and cirrus and a mailmap update for a drm developer. mailmap: - add an entry nouveau: - fix system shutdown regression - build warning fix cirrus: - NULL ptr deref fix msm: - fix invalid ptr free in syncobj cleanup - sync GMU removal in teardown - a5xx preemption fixes - fix runpm imbalance - DPU hw fixes - stack corruption fix - clear DSPP reservation amdgpu: - Misc display fixes - UMC 8.10 fixes - Driver unload fixes - NBIO 7.3.0 fix - Error checking fixes for soc15, nv, soc21 read register interface - Fix video cap query for VCN 4.0.4 amdkfd: - Fix return check in doorbell handling" * tag 'drm-fixes-2023-03-10' of git://anongit.freedesktop.org/drm/drm: (42 commits) drm/amdgpu/soc21: Add video cap query support for VCN_4_0_4 drm/amdgpu: fix error checking in amdgpu_read_mm_registers for nv drm/amdgpu: fix error checking in amdgpu_read_mm_registers for soc21 drm/amdgpu: fix error checking in amdgpu_read_mm_registers for soc15 drm/amdgpu: Fix the warning info when removing amdgpu device drm/amdgpu: fix return value check in kfd drm/amd: Fix initialization mistake for NBIO 7.3.0 drm/amdgpu: Fix call trace warning and hang when removing amdgpu device mailmap: add mailmap entries for Faith. drm/msm: DEVFREQ_GOV_SIMPLE_ONDEMAND is no longer needed drm/amd/display: Update clock table to include highest clock setting drm/amd/pm: Enable ecc_info table support for smu v13_0_10 drm/amdgpu: Support umc node harvest config on umc v8_10 drm/connector: print max_requested_bpc in state debugfs drm/display: Don't block HDR_OUTPUT_METADATA on unknown EOTF drm/msm/dpu: clear DSPP reservations in rm release drm/msm/disp/dpu: fix sc7280_pp base offset drm/msm/dpu: fix stack smashing in dpu_hw_ctl_setup_blendstage drm/msm/dpu: don't use DPU_CLK_CTRL_CURSORn for DMA SSPP clocks drm/msm/dpu: fix clocks settings for msm8998 SSPP blocks ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofsLinus Torvalds authored
Pull erofs fixes from Gao Xiang: "The most important one reverts an improper fix which can cause an unexpected warning more often on specific images, and another one fixes LZMA decompression on 32-bit platforms. The others are minor fixes and cleanups. - Fix LZMA decompression failure on HIGHMEM platforms - Revert an inproper fix since it is actually an implementation issue of vmalloc() - Avoid a wrong DBG_BUGON since it could be triggered with -EINTR - Minor cleanups" * tag 'erofs-for-6.3-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: erofs: use wrapper i_blocksize() in erofs_file_read_iter() erofs: get rid of a useless DBG_BUGON erofs: Revert "erofs: fix kvcalloc() misuse with __GFP_NOFAIL" erofs: fix wrong kunmap when using LZMA on HIGHMEM platforms erofs: mark z_erofs_lzma_init/erofs_pcpubuf_init w/ __init -
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linuxLinus Torvalds authored
Pull nfsd fixes from Chuck Lever: - Protect NFSD writes against filesystem freezing - Fix a potential memory leak during server shutdown * tag 'nfsd-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: SUNRPC: Fix a server shutdown leak NFSD: Protect against filesystem freezing
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "First batch of fixes. Among them there are two updates to sysfs and ioctl which are not strictly fixes but are used for testing so there's no reason to delay them. - fix block group item corruption after inserting new block group - fix extent map logging bit not cleared for split maps after dropping range - fix calculation of unusable block group space reporting bogus values due to 32/64b division - fix unnecessary increment of read error stat on write error - improve error handling in inode update - export per-device fsid in DEV_INFO ioctl to distinguish seeding devices, needed for testing - allocator size classes: - fix potential dead lock in size class loading logic - print sysfs stats for the allocation classes" * tag 'for-6.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix block group item corruption after inserting new block group btrfs: fix extent map logging bit not cleared for split maps after dropping range btrfs: fix percent calculation for bg reclaim message btrfs: fix unnecessary increment of read error stat on write error btrfs: handle btrfs_del_item errors in __btrfs_update_delayed_inode btrfs: ioctl: return device fsid from DEV_INFO ioctl btrfs: fix potential dead lock in size class loading logic btrfs: sysfs: add size class stats -
git://git.kernel.dk/linuxLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: - Stop setting PF_NO_SETAFFINITY on io-wq workers. This has been reported in the past as it confuses some applications, as some of their threads will fail with -1/EINVAL if attempted affinitized. Most recent report was on cpusets, where enabling that with io-wq workers active will fail. Just deal with the mask changing by checking when a worker times out, and then exit if we have no work pending. - Fix an issue with passthrough support where we don't properly check if the file type has pollable uring_cmd support. - Fix a reported W=1 warning on a variable being set and unused. Add a special helper for iterating these lists that doesn't save the previous list element, if that iterator never ends up using it. * tag 'io_uring-6.3-2023-03-09' of git://git.kernel.dk/linux: io_uring: silence variable ‘prev’ set but not used warning io_uring/uring_cmd: ensure that device supports IOPOLL io_uring/io-wq: stop setting PF_NO_SETAFFINITY on io-wq workers
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v6.3-1-2023-03-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Add Adrian Hunter to MAINTAINERS as a perf tools reviewer - Sync various tools/ copies of kernel headers with the kernel sources, this time trying to avoid first merging with upstream to then update but instead copy from upstream so that a merge is avoided and the end result after merging this pull request is the one expected, tools/perf/check-headers.sh (mostly) happy, less warnings while building tools/perf/ - Fix counting when initial delay configured by setting perf_attr.enable_on_exec when starting workloads from the perf command line - Don't avoid emitting a PERF_RECORD_MMAP2 in 'perf inject --buildid-all' when that record comes with a build-id, otherwise we end up not being able to resolve symbols - Don't use comma as the CSV output separator the "stat+csv_output" test, as comma can appear on some tests as a modifier for an event, use @ instead, ditto for the JSON linter test - The offcpu test was looking for some bits being set on task_struct->prev_state without masking other bits not important for this specific 'perf test', fix it * tag 'perf-tools-fixes-for-v6.3-1-2023-03-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf tools: Add Adrian Hunter to MAINTAINERS as a reviewer tools headers UAPI: Sync linux/perf_event.h with the kernel sources tools headers x86 cpufeatures: Sync with the kernel sources tools include UAPI: Sync linux/vhost.h with the kernel sources tools arch x86: Sync the msr-index.h copy with the kernel sources tools headers kvm: Sync uapi/{asm/linux} kvm.h headers with the kernel sources tools include UAPI: Synchronize linux/fcntl.h with the kernel sources tools headers: Synchronize {linux,vdso}/bits.h with the kernel sources tools headers UAPI: Sync linux/prctl.h with the kernel sources tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench' perf stat: Fix counting when initial delay configured tools headers svm: Sync svm headers with the kernel sources perf test: Avoid counting commas in json linter perf tests stat+csv_output: Switch CSV separator to @ perf inject: Fix --buildid-all not to eat up MMAP2 tools arch x86: Sync the msr-index.h copy with the kernel sources perf test: Fix offcpu test prev_state check
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-6.3-2023-03-09' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.3-2023-03-09: amdgpu: - Misc display fixes - UMC 8.10 fixes - Driver unload fixes - NBIO 7.3.0 fix - Error checking fixes for soc15, nv, soc21 read register interface - Fix video cap query for VCN 4.0.4 amdkfd: - Fix return check in doorbell handling Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230310031314.1296929-1-alexander.deucher@amd.com
-
Theodore Ts'o authored
Google-Bug-Id: 114199369 Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Veerabadhran Gopalakrishnan authored
Added the video capability query support for VCN version 4_0_4 Signed-off-by:
Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com> Reviewed-by:
Leo Liu <leo.liu@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x
-
