- 03 Mar, 2016 3 commits
-
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: config FB_XVR2500 bool "Sun XVR-2500 3DLABS Wildcat support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. We don't replace module.h with init.h since the file already has that. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: config FB_XVR1000 bool "Sun XVR-1000 support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. We don't replace module.h with init.h since the file already has that. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: config FB_XVR500 bool "Sun XVR-500 3DLABS Wildcat support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We don't replace module.h with init.h since the file already has that. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
- 29 Feb, 2016 2 commits
-
-
Arnd Bergmann authored
The s6e8ax0 driver has a dependency on BACKLIGHT_CLASS_DEVICE, which can be configured as a loadable module, so we have to make the driver a tristate symbol as well, to avoid this error: drivers/built-in.o: In function `s6e8ax0_probe': :(.text+0x23a48): undefined reference to `devm_backlight_device_register' This also means we get another error from a missing export, which this fixes as well: ERROR: "exynos_mipi_dsi_register_lcd_driver" [drivers/video/fbdev/exynos/s6e8ax0.ko] undefined! The drivers are all written to be loadable modules already, except the Kconfig options for that are missing, which makes the patch really easy. Finally, the EXYNOS_VIDEO option is turned into tristate as well for good measure, as all framebuffer drivers should be configurable as modules, though this change is not strictly necessary. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Sushaanth Srirangapathi authored
Commit 028cd86b ("video: da8xx-fb: fix the polarities of the hsync/vsync pulse") fixes polarities of HSYNC/VSYNC pulse but forgot to update known_lcd_panels[] which had sync values according to old logic. This breaks LCD at least on DA850 EVM. This patch fixes this issue and I have tested this for panel "Sharp_LK043T1DG01" using DA850 EVM board. Fixes: 028cd86b ("video: da8xx-fb: fix the polarities of the hsync/vsync pulse") Signed-off-by:
Sushaanth Srirangapathi <sushaanth.s@ti.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
- 26 Feb, 2016 11 commits
-
-
Rasmus Villemoes authored
The fb_rotate method in struct fb_ops is never actually invoked, and it's been that way in the entire history of git (in fact, the last occurrence of the string '->fb_rotate' vanished over 10 years ago, with b4d8aea6, and that merely tested whether the callback existed). So remove some dead code and make struct fb_obs a little smaller. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Maciej W. Rozycki authored
The Bt431 cursor generator supports simultaneous generation of a 64 x 64 and a cross hair cursor in which the cursor format control bit (bit D4) of the command register "specifies whether the contents of the cursor RAM are to be logically exclusive-ORed (logical zero) or ORed (logical one) with the cross hair cursor". Rename the relevant macro accordingly. References: [1] "Bt431 Monolithic CMOS 64 x 64 Pixel Cursor Generator", Brooktree Corporation, Document Number: L431001, Rev. J Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Maciej W. Rozycki authored
Use the address autoincrement feature when accessing successive palette entries and also skip loading a palette address in overlay register assesses which do not use that address. Provide a red/green/blue register sequencer reset helper for use in overlay register assesses where the state of the sequencer is not known. References: [1] "Bt454 Bt455 170 MHz Monolithic CMOS 16 Color Palette RAMDAC", Brooktree Corporation, Document Number: L454001, Rev. I Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Maciej W. Rozycki authored
The Bt455 is a greyscale RAMDAC, using the green color palette entries only while still providing registers for the red and blue components, all the three of which have to be loaded on palette updates. Chip documentation [1] mandates that the unused red and blue registers are written with 0. Therefore update code to follow this requirement and given that it makes the red and blue components unusable remove them from internal API calls altogether. References: [1] "Bt454 Bt455 170 MHz Monolithic CMOS 16 Color Palette RAMDAC", Brooktree Corporation, Document Number: L454001, Rev. I Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Maciej W. Rozycki authored
Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Maciej W. Rozycki authored
The board uses hardwired timings compatible with 72Hz DEC VR319-DA and VRM17-AA monitors, according to the board owner's manual[1]. These timings are accordingly taken from the VR319 manual[2]. References: [1] "The Monochrome Frame Buffer TURBOchannel Module", Digital Equipment Corporation, Order Number: EK-MFBOM-TC-001, December 1991 [2] "Installing and Using the VR319 Monochrome Monitor", Digital Equipment Corporation, Order Number: EK-VR319-IN-001, First Edition, January 1990, Table 6-1 "Video Timing--1280 x 1024 Resolution" Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Maciej W. Rozycki authored
With the current TURBOchannel API support is automagical. Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Maciej W. Rozycki authored
Rework the driver to use the current frambuffer and TURBOchannel APIs, including proper resource management and using the new framework for hardware cursor support. NB two Bt431 cursor generators are included onboard, both responding at the same TURBOchannel bus addresses and with their host data buses wired to byte lanes #0 and #1 respectively of the 32-bit bus. Therefore both can be accessed simultaneously with 16-bit data transfers. Cursor outputs of the chip wired to lane #0 drive the respective overlay select inputs of the Bt455 RAMDAC, whereas cursor outputs of the chip wired to lane #1 drive the respective P3 pixel select inputs of the RAMDAC. So 5 (out of 17) Bt455 color registers are usable with this board: palette entries #0 and #1 for frame buffer pixel data driven while neither cursor generator is active, palette entries #8 and #9 for frame buffer pixel data driven while cursor generator #1 is active only and the overlay entry while cursor generator #0 is active. Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Maciej W. Rozycki authored
According to the board specification[1] the width of the vertical sync front porch is 12 pixels or the same as the width of the horizontal sync front porch. This in turn means the size of the lower margin is 0, because the vertical sync starts as soon as the start of the horizontal sync terminates the last line. References: [1] "PMAG-BA TURBOchannel Color Frame Buffer Functional Specification", Revision 1.2, Workstation Systems Engineering, Digital Equipment Corporation, August 27, 1990, Table 3-5: "Video Timing" Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Simon Horman authored
Make use of ARCH_RENESAS in place of ARCH_SHMOBILE. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Acked-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Sudip Mukherjee authored
We were not checking the return value of platform_device_add_data() which can fail. Signed-off-by:
Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
- 16 Feb, 2016 3 commits
-
-
Andrzej Hajda authored
IS_ERR_VALUE macro should be used only with unsigned long type. For signed types comparison 'ret < 0' should be used. The patch follows conclusion from discussion on LKML [1][2]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2120927 [2]: http://permalink.gmane.org/gmane.linux.kernel/2150581Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Daniel Wagner authored
As the function name already indicates that get_opt_bool() parses for a bool. It is not a surprise that compiler is complaining about it when -Werror=incompatible-pointer-types is used: drivers/video/fbdev/intelfb/intelfbdrv.c: In function ‘intelfb_setup’: drivers/video/fbdev/intelfb/intelfbdrv.c:353:39: error: passing argument 3 of ‘get_opt_bool’ from incompatible pointer type [-Werror=incompatible-pointer-types] if (get_opt_bool(this_opt, "accel", &accel)) Signed-off-by:
Daniel Wagner <daniel.wagner@bmw-carit.de> Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Dan Carpenter authored
par->metromem_cmd->args[] is an array of 31 elements of size u16. Here we have initialized the first "i" elements and want to set the rest to zero. The issue here is that ARRAY_SIZE(par->metromem_cmd->args) is 31 and not 32 as in the original code. It means that we set ->csum to zero, but that is harmless because we immediately set it to the correct value on the next line. Still, the buffer overflow upsets static checkers so let's correct the math. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
- 14 Feb, 2016 15 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are 3 fixes for some reported issues. Two nvmem driver fixes, and one mei fix. All have been in linux-next just fine" * tag 'char-misc-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: nvmem: qfprom: Specify LE device endianness nvmem: core: return error for non word aligned access mei: validate request value in client notify request ioctl
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull driver core fix from Greg KH: "Here is one driver core, well klist, fix for 4.5-rc4. It fixes a problem found in the scsi device list traversal that probably also could be triggered by other subsystems. The fix has been in linux-next for a while with no reported problems" * tag 'driver-core-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: klist: fix starting point removed bug in klist iterators
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg KH: "Here are a number of small tty and serial driver fixes for 4.5-rc4 that resolve some reported issues. One of them got reverted as it wasn't correct based on testing, and all have been in linux-next for a while" * tag 'tty-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "8250: uniphier: allow modular build with 8250 console" pty: make sure super_block is still valid in final /dev/tty close pty: fix possible use after free of tty->driver_data tty: Add support for PCIe WCH382 2S multi-IO card serial/omap: mark wait_for_xmitr as __maybe_unused serial: omap: Prevent DoS using unprivileged ioctl(TIOCSRS485) 8250: uniphier: allow modular build with 8250 console tty: Drop krefs for interrupted tty lock
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull PHY fixes from Greg KH: "Here are a couple of PHY driver fixes for 4.5-rc4. A few small phy issues. All have been in linux-next with no reported issues" * tag 'usb-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: phy: twl4030-usb: Fix unbalanced pm_runtime_enable on module reload phy: twl4030-usb: Relase usb phy on unload phy: core: fix wrong err handle for phy_power_on phy: Restrict phy-hi6220-usb to HiSilicon arm64
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf tooling fixes from Thomas Gleixner: "Another round of fixes for the perf tooling side: - Prevent a NULL pointer dereference in tracepoint error handling - Fix a thread handling bug in the intel_pt error handling code - Search both .eh_frame and .debug_frame sections as toolchains seem to have random choices of storing the CFI information - Fix the perf state interval output values, which got broken when fixing the overall output" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf stat: Fix interval output values perf probe: Search both .eh_frame and .debug_frame sections for probe location perf tools: Fix thread lifetime related segfaut in intel_pt perf tools: tracepoint_error() can receive e=NULL, robustify it
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull lockdep fix from Thomas Gleixner: "A single fix for the stack trace caching logic in lockdep, where the duplicate avoidance managed to store no back trace at all" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/lockdep: Fix stack trace caching logic
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Thomas Gleixner: "A single fix preventing a 32bit overflow in timespec/val to cputime conversions on 32bit machines" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cputime: Prevent 32bit overflow in time[val|spec]_to_cputime()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irqchip fixes from Thomas Gleixner: "Another set of ARM SoC related irqchip fixes: - Plug a memory leak in gicv3-its - Limit features to the root gic interrupt controller - Add a missing barrier in the gic-v3 IAR access - Another compile test fix for sun4i" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3: Make sure read from ICC_IAR1_EL1 is visible on redestributor irqchip/gic: Only set the EOImodeNS bit for the root controller irqchip/gic: Only populate set_affinity for the root controller irqchip/gicv3-its: Fix memory leak in its_free_tables() irqchip/sun4i: Fix compilation outside of arch/arm
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "Two small fixlets for x86: - Prevent a KASAN false positive in thread_saved_pc() - Fix a 32-bit truncation problem in the x86 numa code" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/numa: Fix 32-bit memblock range truncation bug on 32-bit NUMA kernels x86: Fix KASAN false positives in thread_saved_pc()
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: "Here's the first round of MIPS fixes after the merge window: - Detect Octeon III's PCI correctly. - Fix return value of the MT7620 probing function. - Wire up the copy_file_range syscall. - Fix 64k page support on 32 bit kernels. - Fix the early Coherency Manager probe. - Allow only hardware-supported page sizes to be selected for R6000. - Fix corner cases for the RDHWR nstruction emulation on old hardware. - Fix FPU handling corner cases. - Remove stale entry for BCM33xx from the MAINTAINERS file. - 32 and 64 bit ELF headers are different, handle them correctly" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: mips: Differentiate between 32 and 64 bit ELF header MIPS: Octeon: Update OCTEON_FEATURE_PCIE for Octeon III MIPS: pci-mt7620: Fix return value check in mt7620_pci_probe() MIPS: Fix early CM probing MIPS: Wire up copy_file_range syscall. MIPS: Fix 64k page support for 32 bit kernels. MIPS: R6000: Don't allow 64k pages for R6000. MIPS: traps.c: Correct microMIPS RDHWR emulation MIPS: traps.c: Don't emulate RDHWR in the CpU #0 exception handler MAINTAINERS: Remove stale entry for BCM33xx chips MIPS: Fix FPU disable with preemption MIPS: Properly disable FPU in start_thread() MIPS: Fix buffer overflow in syscall_get_arguments()
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "A couple of ARM fixes from Linus for the ICST clock generator code" [ "Linus" here is Linus Walleij. Name-stealer. Linus "there can be only one" Torvalds ] * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8519/1: ICST: try other dividends than 1 ARM: 8517/1: ICST: avoid arithmetic overflow in icst_hz()
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull component helper fixes from Russell King: "A few fixes for problems people have encountered with the recent update to the component helpers" * 'component' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: component: remove device from master match list on failed add component: Detach components when deleting master struct component: fix crash on x86_64 with hda audio drivers
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdmaLinus Torvalds authored
Pull more rdma fixes from Doug Ledford: "I think we are getting pretty close to done now. There are four one-off fixes in this update: - fix ipoib multicast joins - fix mlx4 error handling - fix mlx5 size computation - fix a thinko in core code" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/mlx5: Fix RC transport send queue overhead computation IB/ipoib: fix for rare multicast join race condition IB/core: Fix reading capability mask of the port info class net/mlx4: fix some error handling in mlx4_multi_func_init()
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target fixes from Nicholas Bellinger: "This includes the long awaited series to address a set of bugs around active I/O remote-port LUN_RESET, as well as properly handling this same case with concurrent fabric driver session disconnect -> reconnect. Note this set of LUN_RESET bug-fixes has been surviving extended testing on both v4.5-rc1 and v3.14.y code over the last weeks, and is CC'ed for stable as it's something folks using multiple ESX connected hosts with slow backends can certainly trigger. The highlights also include: - Fix WRITE_SAME/DISCARD emulation 4k sector conversion in target/iblock (Mike Christie) - Fix TMR abort interaction and AIO type TMR response in qla2xxx target (Quinn Tran + Swapnil Nagle) - Fix >= v3.17 stale descriptor pointer regression in qla2xxx target (Quinn Tran) - Fix >= v4.5-rc1 return regression with unmap_zeros_data_store new configfs store handler (nab) - Add CPU affinity flag + convert qla2xxx to use bit (Quinn + HCH + Bart)" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: qla2xxx: use TARGET_SCF_USE_CPUID flag to indiate CPU Affinity target/transport: add flag to indicate CPU Affinity is observed target: Fix incorrect unmap_zeroes_data_store return qla2xxx: Use ATIO type to send correct tmr response qla2xxx: Fix stale pointer access. target/user: Fix cast from pointer to phys_addr_t target: Drop legacy se_cmd->task_stop_comp + REQUEST_STOP usage target: Fix race with SCF_SEND_DELAYED_TAS handling target: Fix remote-port TMR ABORT + se_cmd fabric stop target: Fix TAS handling for multi-session se_node_acls target: Fix LUN_RESET active TMR descriptor handling target: Fix LUN_RESET active I/O handling for ACK_KREF qla2xxx: Fix TMR ABORT interaction issue between qla2xxx and TCM qla2xxx: Fix warning reported by static checker target: Fix WRITE_SAME/DISCARD conversion to linux 512b sectors
-
- 13 Feb, 2016 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermalLinus Torvalds authored
Pull thermal management fixes from Eduardo Valentin: "Specifics in this pull request: - Compilation fixes on SPEAR, and U8500 thermal drivers. - RCAR thermal driver now recognizes OF-thermal based thermal zones. - Small code rework on OF-thermal. - These change have been CI tested using KernelCI bot [1,2]. \o/ I am taking over on Rui's behalf while he is out. Happy New Chinese Year! [1] - https://kernelci.org/build/evalenti/kernel/v4.5-rc3-16-ga53b8394ec3c/ [2] - https://kernelci.org/boot/all/job/evalenti/kernel/v4.5-rc3-16-ga53b8394ec3c/" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: cpu_cooling: fix out of bounds access in time_in_idle thermal: allow u8500-thermal driver to be a module thermal: allow spear-thermal driver to be a module thermal: spear: use __maybe_unused for PM functions thermal: rcar: enable to use thermal-zone on DT thermal: of: use for_each_available_child_of_node for child iterator
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull another sound fix from Takashi Iwai: "This contains a fix for the double-free of usb-audio MIDI device at probe failure" * tag 'sound-fix-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: avoid freeing umidi object twice
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull ARC fixes from Vineet Gupta: "I've been sitting on some of these fixes for a while. - Corner case of returning to delay slot from interrupt - Changing default interrupt prioiry level - Kconfig'ize support for super pages - Other minor fixes" * tag 'arc-4.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: mm: Introduce explicit super page size support ARCv2: intc: Allow interruption by lowest priority interrupt ARCv2: Check for LL-SC livelock only if LLSC is enabled ARC: shrink cpuinfo by not saving full timer BCR ARCv2: clocksource: Rename GRTC -> GFRC ... ARCv2: STAR 9000950267: Handle return from intr to Delay Slot #2
-
Andrey Konovalov authored
The 'umidi' object will be free'd on the error path by snd_usbmidi_free() when tearing down the rawmidi interface. So we shouldn't try to free it in snd_usbmidi_create() after having registered the rawmidi interface. Found by KASAN. Signed-off-by:
Andrey Konovalov <andreyknvl@gmail.com> Acked-by:
Clemens Ladisch <clemens@ladisch.de> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
- 12 Feb, 2016 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fixes from Bjorn Helgaas: "These are some Renesas binding updates for PCI host controllers, a Broadcom fix for a regression we added in v4.5-rc1, and a fix for an AER use-after-free problem that can cause memory corruption. Summary: AER: Flush workqueue on device remove to avoid use-after-free (Sebastian Andrzej Siewior) Broadcom iProc host bridge driver: Allow multiple devices except on PAXC (Ray Jui) Renesas R-Car host bridge driver: Add gen2 device tree support for r8a7793 (Simon Horman) Add device tree support for r8a7793 (Simon Horman)" * tag 'pci-v4.5-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: rcar: Add device tree support for r8a7793 PCI: rcar: Add gen2 device tree support for r8a7793 PCI: iproc: Allow multiple devices except on PAXC PCI/AER: Flush workqueue on device remove to avoid use-after-free
-
Linus Torvalds authored
Merge fixes from Andrew Morton: "10 fixes" The lockdep hlist conversion is in the locking tree too, waiting for the next merge window. Andrew thought it should go in now. I'll take it, since it fixes a real problem and looks trivially correct (famous last words). * emailed patches from Andrew Morton <akpm@linux-foundation.org>: arch/x86/Kconfig: CONFIG_X86_UV should depend on CONFIG_EFI mm: fix pfn_t vs highmem kernel/locking/lockdep.c: convert hash tables to hlists mm,thp: fix spellos in describing __HAVE_ARCH_FLUSH_PMD_TLB_RANGE mm,thp: khugepaged: call pte flush at the time of collapse mm/backing-dev.c: fix error path in wb_init() mm, dax: check for pmd_none() after split_huge_pmd() vsprintf: kptr_restrict is okay in IRQ when 2 mm: fix filemap.c kernel doc warning ubsan: cosmetic fix to Kconfig text
-