- 16 Nov, 2022 5 commits
-
-
Vipin Sharma authored
Change test args memslot_modification_delay and nr_memslot_modifications to delay and nr_iterations for simplicity. Signed-off-by:
Vipin Sharma <vipinsh@google.com> Suggested-by:
Sean Christopherson <seanjc@google.com> Reviewed-by:
-
Vipin Sharma authored
Replace size_1gb defined in max_guest_memory_test.c with the SZ_1G, SZ_2G and SZ_4G from linux/sizes.h header file. Signed-off-by:
-
Vipin Sharma authored
atoi() doesn't detect errors. There is no way to know that a 0 return is correct conversion or due to an error. Introduce atoi_paranoid() to detect errors and provide correct conversion. Replace all atoi() calls with atoi_paranoid(). Signed-off-by:
David Matlack <dmatlack@google.com> Suggested-by:
-
Vipin Sharma authored
There are 13 command line options and they are not in any order. Put them in alphabetical order to make it easy to add new options. No functional change intended. Signed-off-by:
Wei Wang <wei.w.wang@intel.com> Reviewed-by:
-
Vipin Sharma authored
Passing -e option (Run VCPUs while dirty logging is being disabled) in dirty_log_perf_test also unintentionally enables -g (Do not enable KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2). Add break between two switch case logic. Fixes: cfe12e64 ("KVM: selftests: Add an option to run vCPUs while disabling dirty logging") Signed-off-by:
-
- 09 Nov, 2022 35 commits
-
-
Paolo Bonzini authored
virt/kvm/irqchip.c is including "irq.h" from the arch-specific KVM source directory (i.e. not from arch/*/include) for the sole purpose of retrieving irqchip_in_kernel. Making the function inline in a header that is already included, such as asm/kvm_host.h, is not possible because it needs to look at struct kvm which is defined after asm/kvm_host.h is included. So add a kvm_arch_irqchip_in_kernel non-inline function; irqchip_in_kernel() is only performance critical on arm64 and x86, and the non-inline function is enough on all other architectures. irq.h can then be deleted from all architectures except x86. Signed-off-by:Paolo Bonzini <pbonzini@redhat.com>
-
Like Xu authored
Defer reprogramming counters and handling overflow via KVM_REQ_PMU when incrementing counters. KVM skips emulated WRMSR in the VM-Exit fastpath, the fastpath runs with IRQs disabled, skipping instructions can increment and reprogram counters, reprogramming counters can sleep, and sleeping is disallowed while IRQs are disabled. [*] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580 [*] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 2981888, name: CPU 15/KVM [*] preempt_count: 1, expected: 0 [*] RCU nest depth: 0, expected: 0 [*] INFO: lockdep is turned off. [*] irq event stamp: 0 [*] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [*] hardirqs last disabled at (0): [<ffffffff8121222a>] copy_process+0x146a/0x62d0 [*] softirqs last enabled at (0): [<ffffffff81212269>] copy_process+0x14a9/0x62d0 [*] softirqs last disabled at (0): [<0000000000000000>] 0x0 [*] Preemption disabled at: [*] [<ffffffffc2063fc1>] vcpu_enter_guest+0x1001/0x3dc0 [kvm] [*] CPU: 17 PID: 2981888 Comm: CPU 15/KVM Kdump: 5.19.0-rc1-g239111db364c-dirty #2 [*] Call Trace: [*] <TASK> [*] dump_stack_lvl+0x6c/0x9b [*] __might_resched.cold+0x22e/0x297 [*] __mutex_lock+0xc0/0x23b0 [*] perf_event_ctx_lock_nested+0x18f/0x340 [*] perf_event_pause+0x1a/0x110 [*] reprogram_counter+0x2af/0x1490 [kvm] [*] kvm_pmu_trigger_event+0x429/0x950 [kvm] [*] kvm_skip_emulated_instruction+0x48/0x90 [kvm] [*] handle_fastpath_set_msr_irqoff+0x349/0x3b0 [kvm] [*] vmx_vcpu_run+0x268e/0x3b80 [kvm_intel] [*] vcpu_enter_guest+0x1d22/0x3dc0 [kvm] Add a field to kvm_pmc to track the previous counter value in order to defer overflow detection to kvm_pmu_handle_event() (the counter must be paused before handling overflow, and that may increment the counter). Opportunistically shrink sizeof(struct kvm_pmc) a bit. Suggested-by:
Wanpeng Li <wanpengli@tencent.com> Fixes: 9cd803d4 ("KVM: x86: Update vPMCs when retiring instructions") Signed-off-by:
Like Xu <likexu@tencent.com> Link: https://lore.kernel.org/r/20220831085328.45489-6-likexu@tencent.com [sean: avoid re-triggering KVM_REQ_PMU on overflow, tweak changelog] Signed-off-by:
-
Like Xu authored
Batch reprogramming PMU counters by setting KVM_REQ_PMU and thus deferring reprogramming kvm_pmu_handle_event() to avoid reprogramming a counter multiple times during a single VM-Exit. Deferring programming will also allow KVM to fix a bug where immediately reprogramming a counter can result in sleeping (taking a mutex) while interrupts are disabled in the VM-Exit fastpath. Introduce kvm_pmu_request_counter_reprogam() to make it obvious that KVM is _requesting_ a reprogram and not actually doing the reprogram. Opportunistically refine related comments to avoid misunderstandings. Signed-off-by:
-
Sean Christopherson authored
When reprogramming a counter, clear the counter's "reprogram pending" bit if the counter is disabled (by the guest) or is disallowed (by the userspace filter). In both cases, there's no need to re-attempt programming on the next coincident KVM_REQ_PMU as enabling the counter by either method will trigger reprogramming. Signed-off-by:
-
Sean Christopherson authored
Force vCPUs to reprogram all counters on a PMU filter change to provide a sane ABI for userspace. Use the existing KVM_REQ_PMU to do the programming, and take advantage of the fact that the reprogram_pmi bitmap fits in a u64 to set all bits in a single atomic update. Note, setting the bitmap and making the request needs to be done _after_ the SRCU synchronization to ensure that vCPUs will reprogram using the new filter. KVM's current "lazy" approach is confusing and non-deterministic. It's confusing because, from a developer perspective, the code is buggy as it makes zero sense to let userspace modify the filter but then not actually enforce the new filter. The lazy approach is non-deterministic because KVM enforces the filter whenever a counter is reprogrammed, not just on guest WRMSRs, i.e. a guest might gain/lose access to an event at random times depending on what is going on in the host. Note, the resulting behavior is still non-determinstic while the filter is in flux. If userspace wants to guarantee deterministic behavior, all vCPUs should be paused during the filter update. Jim Mattson <jmattson@google.com> Fixes: 66bb8a06 ("KVM: x86: PMU Event Filter") Cc: Aaron Lewis <aaronlewis@google.com> Signed-off-by:
-
Sean Christopherson authored
Extend the accounting sanity check in kvm_recover_nx_huge_pages() to the TDP MMU, i.e. verify that zapping a shadow page unaccounts the disallowed NX huge page regardless of the MMU type. Recovery runs while holding mmu_lock for write and so it should be impossible to get false positives on the WARN. Suggested-by:
Yan Zhao <yan.y.zhao@intel.com> Signed-off-by:
-
Mingwei Zhang authored
Explicitly check if a NX huge page is disallowed when determining if a page fault needs to be forced to use a smaller sized page. KVM currently assumes that the NX huge page mitigation is the only scenario where KVM will force a shadow page instead of a huge page, and so unnecessarily keeps an existing shadow page instead of replacing it with a huge page. Any scenario that causes KVM to zap leaf SPTEs may result in having a SP that can be made huge without violating the NX huge page mitigation. E.g. prior to commit 5ba7c4c6 ("KVM: x86/MMU: Zap non-leaf SPTEs when disabling dirty logging"), KVM would keep shadow pages after disabling dirty logging due to a live migration being canceled, resulting in degraded performance due to running with 4kb pages instead of huge pages. Although the dirty logging case is "fixed", that fix is coincidental, i.e. is an implementation detail, and there are other scenarios where KVM will zap leaf SPTEs. E.g. zapping leaf SPTEs in response to a host page migration (mmu_notifier invalidation) to create a huge page would yield a similar result; KVM would see the shadow-present non-leaf SPTE and assume a huge page is disallowed. Fixes: b8e8c830 ("kvm: mmu: ITLB_MULTIHIT mitigation") Reviewed-by:
Ben Gardon <bgardon@google.com> Reviewed-by:
Mingwei Zhang <mizhang@google.com> [sean: use spte_to_child_sp(), massage changelog, fold into if-statement] Signed-off-by:
-
Sean Christopherson authored
Add a helper to convert a SPTE to its shadow page to deduplicate a variety of flows and hopefully avoid future bugs, e.g. if KVM attempts to get the shadow page for a SPTE without dropping high bits. Opportunistically add a comment in mmu_free_root_page() documenting why it treats the root HPA as a SPTE. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Track the number of TDP MMU "shadow" pages instead of tracking the pages themselves. With the NX huge page list manipulation moved out of the common linking flow, elminating the list-based tracking means the happy path of adding a shadow page doesn't need to acquire a spinlock and can instead inc/dec an atomic. Keep the tracking as the WARN during TDP MMU teardown on leaked shadow pages is very, very useful for detecting KVM bugs. Tracking the number of pages will also make it trivial to expose the counter to userspace as a stat in the future, which may or may not be desirable. Note, the TDP MMU needs to use a separate counter (and stat if that ever comes to be) from the existing n_used_mmu_pages. The TDP MMU doesn't bother supporting the shrinker nor does it honor KVM_SET_NR_MMU_PAGES (because the TDP MMU consumes so few pages relative to shadow paging), and including TDP MMU pages in that counter would break both the shrinker and shadow MMUs, e.g. if a VM is using nested TDP. Cc: Yan Zhao <yan.y.zhao@intel.com> Reviewed-by:
-
Sean Christopherson authored
Set nx_huge_page_disallowed in TDP MMU shadow pages before making the SP visible to other readers, i.e. before setting its SPTE. This will allow KVM to query the flag when determining if a shadow page can be replaced by a NX huge page without violating the rules of the mitigation. Note, the shadow/legacy MMU holds mmu_lock for write, so it's impossible for another CPU to see a shadow page without an up-to-date nx_huge_page_disallowed, i.e. only the TDP MMU needs the complicated dance. Signed-off-by:
-
Sean Christopherson authored
Account and track NX huge pages for nonpaging MMUs so that a future enhancement to precisely check if a shadow page can't be replaced by a NX huge page doesn't get false positives. Without correct tracking, KVM can get stuck in a loop if an instruction is fetching and writing data on the same huge page, e.g. KVM installs a small executable page on the fetch fault, replaces it with an NX huge page on the write fault, and faults again on the fetch. Alternatively, and perhaps ideally, KVM would simply not enforce the workaround for nonpaging MMUs. The guest has no page tables to abuse and KVM is guaranteed to switch to a different MMU on CR0.PG being toggled so there's no security or performance concerns. However, getting make_spte() to play nice now and in the future is unnecessarily complex. In the current code base, make_spte() can enforce the mitigation if TDP is enabled or the MMU is indirect, but make_spte() may not always have a vCPU/MMU to work with, e.g. if KVM were to support in-line huge page promotion when disabling dirty logging. Without a vCPU/MMU, KVM could either pass in the correct information and/or derive it from the shadow page, but the former is ugly and the latter subtly non-trivial due to the possibility of direct shadow pages in indirect MMUs. Given that using shadow paging with an unpaged guest is far from top priority _and_ has been subjected to the workaround since its inception, keep it simple and just fix the accounting glitch. Signed-off-by:
-
Sean Christopherson authored
Rename most of the variables/functions involved in the NX huge page mitigation to provide consistency, e.g. lpage vs huge page, and NX huge vs huge NX, and also to provide clarity, e.g. to make it obvious the flag applies only to the NX huge page mitigation, not to any condition that prevents creating a huge page. Add a comment explaining what the newly named "possible_nx_huge_pages" tracks. Leave the nx_lpage_splits stat alone as the name is ABI and thus set in stone. Signed-off-by:
-
Sean Christopherson authored
Tag shadow pages that cannot be replaced with an NX huge page regardless of whether or not zapping the page would allow KVM to immediately create a huge page, e.g. because something else prevents creating a huge page. I.e. track pages that are disallowed from being NX huge pages regardless of whether or not the page could have been huge at the time of fault. KVM currently tracks pages that were disallowed from being huge due to the NX workaround if and only if the page could otherwise be huge. But that fails to handled the scenario where whatever restriction prevented KVM from installing a huge page goes away, e.g. if dirty logging is disabled, the host mapping level changes, etc... Failure to tag shadow pages appropriately could theoretically lead to false negatives, e.g. if a fetch fault requests a small page and thus isn't tracked, and a read/write fault later requests a huge page, KVM will not reject the huge page as it should. To avoid yet another flag, initialize the list_head and use list_empty() to determine whether or not a page is on the list of NX huge pages that should be recovered. Note, the TDP MMU accounting is still flawed as fixing the TDP MMU is more involved due to mmu_lock being held for read. This will be addressed in a future commit. Fixes: 5bcaf3e1 ("KVM: x86/mmu: Account NX huge page disallowed iff huge page was requested") Signed-off-by:
-
Aaron Lewis authored
When using the flags in KVM_X86_SET_MSR_FILTER and KVM_CAP_X86_USER_SPACE_MSR it is expected that an attempt to write to any of the unused bits will fail. Add testing to walk over every bit in each of the flag fields in MSR filtering and MSR exiting to verify that unused bits return and error and used bits, i.e. valid bits, succeed. Signed-off-by:
Aaron Lewis <aaronlewis@google.com> Message-Id: <20220921151525.904162-6-aaronlewis@google.com> Signed-off-by:
-
Aaron Lewis authored
Add the mask KVM_MSR_FILTER_RANGE_VALID_MASK for the flags in the struct kvm_msr_filter_range. This simplifies checks that validate these flags, and makes it easier to introduce new flags in the future. No functional change intended. Signed-off-by:
-
Aaron Lewis authored
Add the mask KVM_MSR_FILTER_VALID_MASK for the flag in the struct kvm_msr_filter. This makes it easier to introduce new flags in the future. No functional change intended. Signed-off-by:
-
Aaron Lewis authored
Add the mask KVM_MSR_EXIT_REASON_VALID_MASK for the MSR exit reason flags. This simplifies checks that validate these flags, and makes it easier to introduce new flags in the future. No functional change intended. Signed-off-by:
-
Aaron Lewis authored
Protect the kernel from using the flag KVM_MSR_FILTER_DEFAULT_ALLOW. Its value is 0, and using it incorrectly could have unintended consequences. E.g. prevent someone in the kernel from writing something like this. if (filter.flags & KVM_MSR_FILTER_DEFAULT_ALLOW) <allow the MSR> and getting confused when it doesn't work. It would be more ideal to remove this flag altogether, but userspace may already be using it, so protecting the kernel is all that can reasonably be done at this point. Suggested-by: -
Peter Xu authored
Enable x86 slow page faults to be able to respond to non-fatal signals, returning -EINTR properly when it happens. Signed-off-by:
Peter Xu <peterx@redhat.com> Reviewed-by:
-
Peter Xu authored
Add a new "interruptible" flag showing that the caller is willing to be interrupted by signals during the __gfn_to_pfn_memslot() request. Wire it up with a FOLL_INTERRUPTIBLE flag that we've just introduced. This prepares KVM to be able to respond to SIGUSR1 (for QEMU that's the SIGIPI) even during e.g. handling an userfaultfd page fault. No functional change intended. Signed-off-by:
-
Peter Xu authored
Add a new pfn error to show that we've got a pending signal to handle during hva_to_pfn_slow() procedure (of -EINTR retval). Signed-off-by:
-
Peter Xu authored
We have had FAULT_FLAG_INTERRUPTIBLE but it was never applied to GUPs. One issue with it is that not all GUP paths are able to handle signal delivers besides SIGKILL. That's not ideal for the GUP users who are actually able to handle these cases, like KVM. KVM uses GUP extensively on faulting guest pages, during which we've got existing infrastructures to retry a page fault at a later time. Allowing the GUP to be interrupted by generic signals can make KVM related threads to be more responsive. For examples: (1) SIGUSR1: which QEMU/KVM uses to deliver an inter-process IPI, e.g. when the admin issues a vm_stop QMP command, SIGUSR1 can be generated to kick the vcpus out of kernel context immediately, (2) SIGINT: which can be used with interactive hypervisor users to stop a virtual machine with Ctrl-C without any delays/hangs, (3) SIGTRAP: which grants GDB capability even during page faults that are stuck for a long time. Normally hypervisor will be able to receive these signals properly, but not if we're stuck in a GUP for a long time for whatever reason. It happens easily with a stucked postcopy migration when e.g. a network temp failure happens, then some vcpu threads can hang death waiting for the pages. With the new FOLL_INTERRUPTIBLE, we can allow GUP users like KVM to selectively enable the ability to trap these signals. Reviewed-by:John Hubbard <jhubbard@nvidia.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
-
Maxim Levitsky authored
When #SMI is asserted, the CPU can be in interrupt shadow due to sti or mov ss. It is not mandatory in Intel/AMD prm to have the #SMI blocked during the shadow, and on top of that, since neither SVM nor VMX has true support for SMI window, waiting for one instruction would mean single stepping the guest. Instead, allow #SMI in this case, but both reset the interrupt window and stash its value in SMRAM to restore it on exit from SMM. This fixes rare failures seen mostly on windows guests on VMX, when #SMI falls on the sti instruction which mainfest in VM entry failure due to EFLAGS.IF not being set, but STI interrupt window still being set in the VMCS. Signed-off-by:
Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20221025124741.228045-24-mlevitsk@redhat.com> Signed-off-by:
-
Maxim Levitsky authored
When the guest CPUID doesn't have support for long mode, 32 bit SMRAM layout is used and it has no support for preserving EFER and/or SVM state. Note that this isn't relevant to running 32 bit guests on VM which is long mode capable - such VM can still run 32 bit guests in compatibility mode. Signed-off-by:
-
Maxim Levitsky authored
Use SMM structs in the SVM code as well, which removes the last user of put_smstate/GET_SMSTATE so remove these macros as well. Signed-off-by:
-
Maxim Levitsky authored
if kvm_vcpu_map returns non zero value, error path should be triggered regardless of the exact returned error value. Suggested-by:
-
Maxim Levitsky authored
Use kvm_smram_state_64 struct to save/restore the 64 bit SMM state (used when X86_FEATURE_LM is present in the guest CPUID, regardless of 32-bitness of the guest). Signed-off-by:
-
Maxim Levitsky authored
Use kvm_smram_state_32 struct to save/restore 32 bit SMM state (used when X86_FEATURE_LM is not present in the guest CPUID). Signed-off-by:
-
Maxim Levitsky authored
Use kvm_smram union instad of raw arrays in the common smm code. Signed-off-by:
-
Maxim Levitsky authored
Add structs that will be used to define and read/write the KVM's SMRAM layout, instead of reading/writing to raw offsets. Also document the differences between KVM's SMRAM layout and SMRAM layout that is used by real Intel/AMD cpus. Signed-off-by:
-
Maxim Levitsky authored
In the rare case of the failure on SMM entry, the KVM should at least terminate the VM instead of going south. Suggested-by:
-
Paolo Bonzini authored
The hidden processor flags HF_SMM_MASK and HF_SMM_INSIDE_NMI_MASK are not needed if CONFIG_KVM_SMM is turned off. Remove the definitions altogether and the code that uses them. Suggested-by:
-
Paolo Bonzini authored
This allows making some fields optional, as will be the case soon for SMM-related data. Signed-off-by: -
Paolo Bonzini authored
This ensures that all the relevant code is compiled out, in fact the process_smi stub can be removed too. Signed-off-by:
-
Paolo Bonzini authored
If CONFIG_KVM_SMM is not defined HF_SMM_MASK will always be zero, and we can spare userspace the hassle of setting up the SMRAM address space simply by reporting that only one address space is supported. Signed-off-by:
-
