- 13 Nov, 2018 3 commits
-
-
Christian König authored
We accidentially set the huge flag on the parent instead of the childs. This caused some VM faults under memory pressure. Signed-off-by:
Christian König <christian.koenig@amd.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Tested-by:
Samuel Pitoiset <samuel.pitoiset@gmail.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Rex Zhu authored
the clk value should be tranferred to MHz first and then transfer to uint16. otherwise, the clock value will be truncated. Reviewed-by:
Hersen Wu <hersenxs.wu@amd.com> Signed-off-by:
Rex Zhu <Rex.Zhu@amd.com> Signed-off-by:
-
Philip Yang authored
The bug limits the IH ring wptr address to 40bit. When the system memory is bigger than 1TB, the bus address is more than 40bit, this causes the interrupt cannot be handled and cleared correctly. Reviewed-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
-
- 12 Nov, 2018 1 commit
-
-
shaoyunl authored
In XGMI configuration, the FB region covers vram region from peer device, adjust system aperture to cover all of them Reviewed-by:
shaoyunl <shaoyun.liu@amd.com> Signed-off-by:
-
- 10 Nov, 2018 3 commits
-
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Fixes for 4.20: - DC MST fixes - DC FBC fix - Vega20 updates to support the latest vbios - KFD type fixes for ioctl headers Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181108035551.2904-1-alexander.deucher@amd.com
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
- sun4i: tcon->panel NULL deref protections (Giulio) Cc: Giulio Benetti <giulio.benetti@micronovasrl.com> Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2018-11-08' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Bugzilla #108282 fixed: Avoid graphics corruption on 32-bit systems for Mesa 18.2.x Avoid OOPS on LPE audio deinit. Remove two unused W/As. Fix to correct HDMI 2.0 audio clock modes to spec. Signed-off-by:
-
- 07 Nov, 2018 6 commits
-
-
Lyude Paul authored
[why] Removing connector reusage from DM to match the rest of the tree ended up revealing an issue that was surprisingly subtle. The original amdgpu code for DC that was submitted appears to have left a chunk in dm_dp_create_fake_mst_encoder() that tries to find a "master encoder", the likes of which isn't actually used or stored anywhere. It does so at the wrong time as well by trying to access parts of the drm_connector from the encoder init before it's actually been initialized. This results in a NULL pointer deref on MST hotplugs: [ 160.696613] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 160.697234] PGD 0 P4D 0 [ 160.697814] Oops: 0010 [#1] SMP PTI [ 160.698430] CPU: 2 PID: 64 Comm: kworker/2:1 Kdump: loaded Tainted: G O 4.19.0Lyude-Test+ #2 [ 160.699020] Hardware name: HP HP ZBook 15 G4/8275, BIOS P70 Ver. 01.22 05/17/2018 [ 160.699672] Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper] [ 160.700322] RIP: 0010: (null) [ 160.700920] Code: Bad RIP value. [ 160.701541] RSP: 0018:ffffc9000029fc78 EFLAGS: 00010206 [ 160.702183] RAX: 0000000000000000 RBX: ffff8804440ed468 RCX: ffff8804440e9158 [ 160.702778] RDX: 0000000000000000 RSI: ffff8804556c5700 RDI: ffff8804440ed000 [ 160.703408] RBP: ffff880458e21800 R08: 0000000000000002 R09: 000000005fca0a25 [ 160.704002] R10: ffff88045a077a3d R11: ffff88045a077a3c R12: ffff8804440ed000 [ 160.704614] R13: ffff880458e21800 R14: ffff8804440e9000 R15: ffff8804440e9000 [ 160.705260] FS: 0000000000000000(0000) GS:ffff88045f280000(0000) knlGS:0000000000000000 [ 160.705854] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 160.706478] CR2: ffffffffffffffd6 CR3: 000000000200a001 CR4: 00000000003606e0 [ 160.707124] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 160.707724] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 160.708372] Call Trace: [ 160.708998] ? dm_dp_add_mst_connector+0xed/0x1d0 [amdgpu] [ 160.709625] ? drm_dp_add_port+0x2fa/0x470 [drm_kms_helper] [ 160.710284] ? wake_up_q+0x54/0x70 [ 160.710877] ? __mutex_unlock_slowpath.isra.18+0xb3/0x110 [ 160.711512] ? drm_dp_dpcd_access+0xe7/0x110 [drm_kms_helper] [ 160.712161] ? drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper] [ 160.712762] ? drm_dp_check_and_send_link_address+0xa3/0xd0 [drm_kms_helper] [ 160.713408] ? drm_dp_mst_link_probe_work+0x4b/0x80 [drm_kms_helper] [ 160.714013] ? process_one_work+0x1a1/0x3a0 [ 160.714667] ? worker_thread+0x30/0x380 [ 160.715326] ? wq_update_unbound_numa+0x10/0x10 [ 160.715939] ? kthread+0x112/0x130 [ 160.716591] ? kthread_create_worker_on_cpu+0x70/0x70 [ 160.717262] ? ret_from_fork+0x35/0x40 [ 160.717886] Modules linked in: amdgpu(O) vfat fat snd_hda_codec_generic joydev i915 chash gpu_sched ttm i2c_algo_bit drm_kms_helper snd_hda_codec_hdmi hp_wmi syscopyarea iTCO_wdt sysfillrect sparse_keymap sysimgblt fb_sys_fops snd_hda_intel usbhid wmi_bmof drm snd_hda_codec btusb snd_hda_core intel_rapl btrtl x86_pkg_temp_thermal btbcm btintel coretemp snd_pcm crc32_pclmul bluetooth psmouse snd_timer snd pcspkr i2c_i801 mei_me i2c_core soundcore mei tpm_tis wmi tpm_tis_core hp_accel ecdh_generic lis3lv02d tpm video rfkill acpi_pad input_polldev hp_wireless pcc_cpufreq crc32c_intel serio_raw tg3 xhci_pci xhci_hcd [last unloaded: amdgpu] [ 160.720141] CR2: 0000000000000000 Somehow the connector reusage DM was using for MST connectors managed to paper over this issue entirely; hence why this was never caught until now. [how] Since this code isn't used anywhere and seems useless anyway, we can just drop it entirely. This appears to fix the issue on my HP ZBook with an AMD WX4150. Signed-off-by:
Lyude Paul <lyude@redhat.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Jerry (Fangzhi) Zuo authored
[why] It is not safe to keep existing connector while entire topology has been removed. Could lead potential impact to uapi. Entirely unregister all the connectors on the topology, and use a new set of connectors when the topology is plugged back on. [How] Remove the drm connector entirely each time when the corresponding MST topology is gone. When hotunplug a connector (e.g., DP2) 1. Remove connector from userspace. 2. Drop it's reference. When hotplug back on: 1. Detect new topology, and create new connectors. 2. Notify userspace with sysfs hotplug event. 3. Reprobe new connectors, and reassign CRTC from old (e.g., DP2) to new (e.g., DP3) connector. Signed-off-by:
Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by:
-
Jerry (Fangzhi) Zuo authored
[why] It is not correct to touch aconnector within atomic_check. [How] It was added as workaround before, and no longer needed. Signed-off-by:
-
Evan Quan authored
With UCLK DPM enabled, slow switching is not supported any more. Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
Feifei Xu <Feifei.Xu@amd.com> Signed-off-by:
-
Evan Quan authored
Otherwise big gap between these two clocks may causes some hangs. Signed-off-by:
-
https://github.com/intel/gvt-linuxJoonas Lahtinen authored
gvt-fixes-2018-11-07 - Fix invalidate of old ggtt entry (Hang) - Fix partial ggtt entry update in any order (Hang) - Fix one mask setting for chicken reg (Xinyun) - Fix eDP warning in guest (Longhe) Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181107023137.GO25194@zhen-hp.sh.intel.com
-
- 06 Nov, 2018 25 commits
-
-
Dave Airlie authored
Merge tag 'exynos-drm-fixes-for-v4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Three regressions - Revert frame counter support . This patch fixes a issue which doesn't work extension and clone mode because some CRTC devices don't provide frame counter value properly. - Fix lack of fbdev on Rinato and trats boards. . This patch considers for connector to be registered by DSI after DRM device is registered, and also it makes fbdev initializaion to be done even if no connector at the moment. - Check for dsi->panel object correctly . This patch fixes checking for dsi->panel. of_drm_find_panel function returns panel object or error value so error value should be checked using IS_ERR macro. Signed-off-by:
-
https://git.pengutronix.de/git/lst/linuxDave Airlie authored
Single etnaviv fence fix for GPU recovery. Signed-off-by:
-
Alex Deucher authored
Causes a black screen on a Stoney laptop. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=108577Reviewed-by:
-
Alex Deucher authored
Set the dc_config properly when the option is enabled. Reviewed-by:
-
Alex Deucher authored
Add FBC to the list of features that can be enabled from the DM. Reviewed-by:
-
Alex Deucher authored
Similar to ppfeaturemask. Allows you to selectively enable/disable DC features. Reviewed-by:
-
Alex Deucher authored
The value is dependent on whether fbc is available. v2: only check if num_pipes is valid Reviewed-by:
-
Alex Deucher authored
In case we need to access CLK registers. Acked-by:
-
Harry Wentland authored
[Why] drm_plane_cleanup does not free the plane. [How] Call drm_primary_helper_destroy which will also free the plane. Signed-off-by:
-
Shaokun Zhang authored
RETIMER_REDRIVER_INFO shows the buffer as a decimal value with a '0x' prefix, which is somewhat misleading. Fix it to print hexadecimal, as was intended. Fixes: 2f14bc89("drm/amd/display: add retimer log for HWQ tuning use.") Cc: Charlene Liu <charlene.liu@amd.com> Cc: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by:
Shaokun Zhang <zhangshaokun@hisilicon.com> Reviewed-by:
Leo Li <sunpeng.li@amd.com> Signed-off-by:
-
Alex Deucher authored
This reverts commit 0cafc82f. This breaks some apps that assume 0 is minimum brightness. Revert for 4.20. This is fixed properly for drm-next/4.21 in: "drm/amd: Don't fail on backlight = 0" However, that patch depends on more extensive changes to the backlight interface which are too invasive for -fixes. Fixes: Bugzilla: https://bugs.freedesktop.org/108668Signed-off-by:
-
Leo Li authored
Mainly adding the WAFL spread spectrum info, for adjusting display clocks when XGMI is enabled. Signed-off-by:
-
Ville Syrjälä authored
We're no longer programming any watermarks when we're disabling a pipe. That means ilk_wm_merge() & co. will keep considering the any pipe that is getting disabled as still enabled. Thus we either get no LP1+ watermakrs (ilk-ivb), or we get suboptimal ones (hsw-bdw). This seems to have been broken by commit b6b178a7 ("drm/i915: Calculate ironlake intermediate watermarks correctly, v2."). Before that we apparently had some difference between the intermediate and optimal watermarks and so we would program the optiomal ones. Now intermediate and optimal are identical for disabled pipes and so we don't program either. Fix this by programming the intermediate watermarks even for disabled pipes. We were already doing that for skl+. We'll leave out gmch platforms for now since those do the merging in a different manner and should work as is. We'll want to unify this eventually, but play it safe for now and just put in a FIXME. Cc: stable@vger.kernel.org Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: b6b178a7 ("drm/i915: Calculate ironlake intermediate watermarks correctly, v2.") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181025130536.29024-1-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc (cherry picked from commit a748faea) Signed-off-by:
-
Giulio Benetti authored
If tcon->panel pointer is NULL, trying to dereference from it (i.e. tcon->panel->connector) will cause a null pointer dereference. Add tcon->panel null pointer check before calling sun4i_tcon0_mode_set_dithering(). Signed-off-by:
Giulio Benetti <giulio.benetti@micronovasrl.com> Fixes: f11adcec ("drm/sun4i: tcon: Add dithering support for RGB565/RGB666 LCD panels") Reviewed-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181005215951.99003-2-giulio.benetti@micronovasrl.com
-
Giulio Benetti authored
Since tcon->panel is a pointer returned by of_drm_find_panel() need to check if it is not NULL, hence a valid pointer. IS_ERR() instead checks return error values, not NULL pointers. Substitute "if (!IS_ERR(tcon->panel))" with "if (tcon->panel)". Signed-off-by:
-
Ville Syrjälä authored
We deinit the lpe audio device before we call drm_atomic_helper_shutdown(), which means the platform device may already be gone when it comes time to shut down the crtc. As we don't know when the last reference to the platform device gets dropped by the audio driver we can't assume that the device and its data are still around when turning off the crtc. Mark the platform device as gone as soon as we do the audio deinit. Cc: stable@vger.kernel.org Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit f45a7977) Signed-off-by:
-
Chris Wilson authored
Since the flags are being used to operate on a u64 variable, they too need to be marked as such so that the inverses are full width (and not zero extended on 32b kernels and bdw+). Reported-by:
Sergii Romantsov <sergii.romantsov@globallogic.com> Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181102161232.17742-2-chris@chris-wilson.co.uk (cherry picked from commit 83b466b1) Signed-off-by:
-
Manasi Navare authored
This patch fixes the macros used for defining the DFLEXDPMLE register bit fields. This accounts for changes in the spec. Fixes: a2bc69a1 ("drm/i915/icl: Add register definition for DFLEXDPMLE") Cc: Animesh Manna <animesh.manna@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jose Roberto de Souza <jose.souza@intel.com> Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181023191248.26418-1-manasi.d.navare@intel.com (cherry picked from commit b4335ec0) Signed-off-by:
-
Ville Syrjälä authored
Let's not leak obj->framebuffer_references when we decide that the framebuffer domensions are not suitable for NV12. Cc: stable@vger.kernel.org Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Vidya Srinivas <vidya.srinivas@intel.com> Fixes: e44134f2 ("drm/i915: Add NV12 support to intel_framebuffer_init") Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> (cherry picked from commit 3b90946f) Signed-off-by:
-
Dhinakaran Pandiyan authored
The shifts for VSC_SELECT bits are wrong, fix it. Good thing is the definitions are unused. v2: Moves definitions in another patch (Manasi) Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Fixes: 7af2be6d ("drm/i915/icl: Add VIDEO_DIP registers") Signed-off-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
-
Rodrigo Vivi authored
While checking the opportunity to add a display_gen check to allow glk and cnl to be on same bucket I noticed these FIXME cases here. So I got the confirmation from HW architect that we actually never needed this workaround. "GLK supports 2 pixel per clock, so pixel clock can be up to 2 * cdclk." So, this reverts commit 97f55ca5 ("drm/i915/glk: limit pixel clock to 99% of cdclk workaround") Fixes: 97f55ca5 ("drm/i915/glk: limit pixel clock to 99% of cdclk workaround") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Clinton Taylor <clinton.a.taylor@intel.com> Cc: Arthur J Runyan <arthur.j.runyan@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
-
Chris Wilson authored
Beware mixing unsigned long constants and 64b values, as on 32b the constant will be zero extended and discard the high 32b when used as a mask! Reported-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181025091823.20571-2-chris@chris-wilson.co.uk (cherry picked from commit 6fc4e48f) Signed-off-by:
-
Chris Wilson authored
Since we use a 64b virtual GTT irrespective of the system, we want to ensure that the GTT computations remains 64b even on 32b systems, including treatment of huge virtual pages. No code generation changes on 64b: Reported-by:
-
Clint Taylor authored
HDMI 2.0 594Mhz modes were incorrectly selecting 25.200Mhz Automatic N value mode instead of HDMI specification values. V2: Fix 88.2 Hz N value Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1540493521-1746-2-git-send-email-clinton.a.taylor@intel.com (cherry picked from commit 5a400aa3) Signed-off-by:
-
Ville Syrjälä authored
The 16Gb DIMM w/a is not applicable to BXT or GLK. Limit it to the appropriate platforms. This was especially harsh on GLK since we don't even try to read the DIMM information on that platforms, hence valid_dimm was always false and thus we always tried to apply the w/a. Furthermore the w/a pushed the level 0 latency above the level 1 latency, which doesn't really make sense. v2: Do the check when populating is_16gb_dimm (Mahesh) Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 86b59287 ("drm/i915: Implement 16GB dimm wa for latency level-0") Signed-off-by:
Mahesh Kumar <mahesh1.sh.kumar@gmail.com> (cherry picked from commit 5d6f36b2) Signed-off-by:
-
- 05 Nov, 2018 2 commits
-
-
Dmitry V. Levin authored
Consistently use types provided by <linux/types.h> via <drm/drm.h> to fix struct kfd_ioctl_get_queue_wave_state_args userspace compilation errors. Fixes: 5df099e8 ("drm/amdkfd: Add wavefront context save state retrieval ioctl") Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Reviewed-by:
-
Dmitry V. Levin authored
Consistently use types provided by <linux/types.h> via <drm/drm.h> to fix the following linux/kfd_ioctl.h userspace compilation errors: /usr/include/linux/kfd_ioctl.h:250:2: error: unknown type name 'uint32_t' uint32_t reset_type; /usr/include/linux/kfd_ioctl.h:251:2: error: unknown type name 'uint32_t' uint32_t reset_cause; /usr/include/linux/kfd_ioctl.h:252:2: error: unknown type name 'uint32_t' uint32_t memory_lost; /usr/include/linux/kfd_ioctl.h:253:2: error: unknown type name 'uint32_t' uint32_t gpu_id; Fixes: 0c119aba ("drm/amd: Add kfd ioctl defines for hw_exception event") Cc: <stable@vger.kernel.org> # v4.19 Signed-off-by:
-
