Extend qat_bl_sgl_to_bufl() to allow skipping the mapping of a region
of the source and the destination scatter lists starting from byte
zero.

This is to support the ZLIB format (RFC 1950) in the qat driver.
The ZLIB format is made of deflate compressed data surrounded by a
header and a footer. The QAT accelerators support only the deflate
algorithm, therefore the header should not be mapped since it is
inserted in software.
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Revert "crypto: rsa-pkcs1pad - Replace GFP_ATOMIC with GFP_KERNEL in pkcs1pad_encrypt_sign_complete"

This reverts commit 1ca28098.

While the akcipher API as a whole is designed to be called only
from thread context, its completion path is still called from
softirq context as usual.  Therefore we must not use GFP_KERNEL
on that path.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Currently the ecb/cbc macros hold fpu context unnecessarily when using
scalar cipher routines (e.g. when handling odd sizes of blocks per walk).

Change the macros to drop fpu context as soon as the fpu is out of use.

No performance impact found (on Intel Haswell).
Signed-off-by: Peter Lafreniere <peter@n8pjl.ca>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The engine parameter should not be marked for kernel doc as it
triggers a warning.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As it is xts only handles the special return value of EINPROGRESS,
which means that in all other cases it will free data related to the
request.

However, as the caller of xts may specify MAY_BACKLOG, we also need
to expect EBUSY and treat it in the same way.  Otherwise backlogged
requests will trigger a use-after-free.

Fixes: 8083b1bf ("crypto: xts - add support for ciphertext stealing")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Instead of calling the base completion function directly, use the
correct ahash helper which is ahash_request_complete.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Instead of doing saving and restoring on the AEAD request object
for fallback processing, use a subrequest instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Previously the child skcipher request was stored on the stack and
therefore needed to be zeroed.  As it is now dynamically allocated
we no longer need to do so.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

aspeed_acry_akcipher_algs is only used in aspeed-acry.c now,
change it to static.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Neal Liu <neal_liu@aspeedtech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

According to FIPS 140-3 IG, section D.R "Hash Functions Acceptable for
Use in the SP 800-90A DRBGs", modules certified after May 16th, 2023
must not support the use of: SHA-224, SHA-384, SHA512-224, SHA512-256,
SHA3-224, SHA3-384. Disallow HMAC and HASH DRBGs using SHA-384 in FIPS
mode.
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Reviewed-by: Stephan Müller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This adds driver support for the hardware random number generator in
Starfive SoCs and adds StarFive TRNG entry to MAINTAINERS.
Co-developed-by: Jenny Zhang <jenny.zhang@starfivetech.com>
Signed-off-by: Jenny Zhang <jenny.zhang@starfivetech.com>
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add documentation to describe Starfive true random number generator
module.
Co-developed-by: Jenny Zhang <jenny.zhang@starfivetech.com>
Signed-off-by: Jenny Zhang <jenny.zhang@starfivetech.com>
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add a new MODULE_FIRMWARE() entry for 4th generation EPYC processors.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add comments next to the version data MMIO register values to identify
the register name being used.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The minimum version of binutils for kernel build is currently 2.23 and
it doesn't support GFNI.
So, it fails to build the aria-avx512 if the old binutils is used.
aria-avx512 requires GFNI, so it should not be allowed to build if the
old binutils is used.
The AS_AVX512 and AS_GFNI are added to the Kconfig to disable build
aria-avx512 if the old binutils is used.

Fixes: c970d420 ("crypto: x86/aria - implement aria-avx512")
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The minimum version of binutils for kernel build is currently 2.23 and
it doesn't support GFNI.
So, it fails to build the aria-avx2 if the old binutils is used.
The code using GFNI is an optional part of aria-avx2.
So, it disables GFNI part in it when the old binutils is used.

Fixes: 37d8d3ae ("crypto: x86/aria - implement aria-avx2")
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The minimum version of binutils for kernel build is currently 2.23 and
it doesn't support GFNI.
So, it fails to build the aria-avx if the old binutils is used.
The code using GFNI is an optional part of aria-avx.
So, it disables GFNI part in it when the old binutils is used.
In order to check whether the using binutils is supporting GFNI or not,
AS_GFNI is added.

Fixes: ba3579e6 ("crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher")
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As it is seqiv only handles the special return value of EINPROGERSS,
which means that in all other cases it will free data related to the
request.

However, as the caller of seqiv may specify MAY_BACKLOG, we also need
to expect EBUSY and treat it in the same way.  Otherwise backlogged
requests will trigger a use-after-free.

Fixes: 0a270321 ("[CRYPTO] seqiv: Add Sequence Number IV Generator")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As it is essiv only handles the special return value of EINPROGERSS,
which means that in all other cases it will free data related to the
request.

However, as the caller of essiv may specify MAY_BACKLOG, we also need
to expect EBUSY and treat it in the same way.  Otherwise backlogged
requests will trigger a use-after-free.

Fixes: be1eb7f7 ("crypto: essiv - create wrapper template...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Defines prefixed with "CONFIG" should be limited to proper Kconfig options,
that are introduced in a Kconfig file.

Here, a definition for the driver's configuration zone is named
CONFIG_ZONE. Rename this local definition to CONFIGURATION_ZONE to avoid
defines prefixed with "CONFIG".

No functional change.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix spelling mistakes from 'bufer' to 'buffer' in qat_common.
Also fix indentation issue caused by the spelling change.
Signed-off-by: Meadhbh Fitzpatrick <meadhbh.fitzpatrick@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

While reviewing dependencies in some Kconfig files, I noticed the redundant
dependency "depends on PCI && PCI_MSI". The config PCI_MSI has always,
since its introduction, been dependent on the config PCI. So, it is
sufficient to just depend on PCI_MSI, and know that the dependency on PCI
is implicitly implied.

Reduce the dependencies of configs CRYPTO_DEV_HISI_SEC2,
CRYPTO_DEV_HISI_QM, CRYPTO_DEV_HISI_ZIP and CRYPTO_DEV_HISI_HPRE.

No functional change and effective change of Kconfig dependendencies.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When reading or writing crypto buffers the inner loops can
be replaced with readsl and writesl which will on ARM result
in a tight assembly loop, speeding up encryption/decryption
a little bit. This optimization was in the Ux500 driver so
let's carry it over to the STM32 driver.

Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Lionel Debieve <lionel.debieve@foss.st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Zero-length arrays are deprecated[1] and we are moving towards
adopting C99 flexible-array members instead. So, replace zero-length
array declaration in struct aspeed_sham_ctx with flex-array
member.

This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [2].

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays [1]
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [2]
Link: https://github.com/KSPP/linux/issues/78Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Neal Liu <neal_liu@aspeedtech.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The following warning appears during the CCP module re-initialization:

[  140.965403] sysfs: cannot create duplicate filename
'/devices/pci0000:00/0000:00:07.1/0000:03:00.2/dma/dma0chan0'
[  140.975736] CPU: 0 PID: 388 Comm: kworker/0:2 Kdump: loaded Not
tainted 6.2.0-0.rc2.18.eln124.x86_64 #1
[  140.985185] Hardware name: HPE ProLiant DL325 Gen10/ProLiant DL325
Gen10, BIOS A41 07/17/2020
[  140.993761] Workqueue: events work_for_cpu_fn
[  140.998151] Call Trace:
[  141.000613]  <TASK>
[  141.002726]  dump_stack_lvl+0x33/0x46
[  141.006415]  sysfs_warn_dup.cold+0x17/0x23
[  141.010542]  sysfs_create_dir_ns+0xba/0xd0
[  141.014670]  kobject_add_internal+0xba/0x260
[  141.018970]  kobject_add+0x81/0xb0
[  141.022395]  device_add+0xdc/0x7e0
[  141.025822]  ? complete_all+0x20/0x90
[  141.029510]  __dma_async_device_channel_register+0xc9/0x130
[  141.035119]  dma_async_device_register+0x19e/0x3b0
[  141.039943]  ccp_dmaengine_register+0x334/0x3f0 [ccp]
[  141.045042]  ccp5_init+0x662/0x6a0 [ccp]
[  141.049000]  ? devm_kmalloc+0x40/0xd0
[  141.052688]  ccp_dev_init+0xbb/0xf0 [ccp]
[  141.056732]  ? __pci_set_master+0x56/0xd0
[  141.060768]  sp_init+0x70/0x90 [ccp]
[  141.064377]  sp_pci_probe+0x186/0x1b0 [ccp]
[  141.068596]  local_pci_probe+0x41/0x80
[  141.072374]  work_for_cpu_fn+0x16/0x20
[  141.076145]  process_one_work+0x1c8/0x380
[  141.080181]  worker_thread+0x1ab/0x380
[  141.083953]  ? __pfx_worker_thread+0x10/0x10
[  141.088250]  kthread+0xda/0x100
[  141.091413]  ? __pfx_kthread+0x10/0x10
[  141.095185]  ret_from_fork+0x2c/0x50
[  141.098788]  </TASK>
[  141.100996] kobject_add_internal failed for dma0chan0 with -EEXIST,
don't try to register things with the same name in the same directory.
[  141.113703] ccp 0000:03:00.2: ccp initialization failed

The /dma/dma0chan0 sysfs file is not removed since dma_chan object
has been released in ccp_dma_release() before releasing dma device.
A correct procedure would be: release dma channels first => unregister
dma device => release ccp dma object.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216888
Fixes: 68dbe80f ("crypto: ccp - Release dma channels before dmaengine unrgister")
Tested-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Koba Ko <koba.ko@canonical.com>
Reviewed-by: Vladis Dronov <vdronov@redhat.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The AEAD documentation conflates associated data and authentication
tags: the former (along with the ciphertext) is authenticated by the
latter. Fix the doc accordingly.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

RFC4106 wraps AES in GCM mode, and can be used with larger key sizes
than 128/160 bits, just like AES itself. So add these to the tcrypt
recipe so they will be benchmarked as well.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add support for RFC4106 ESP encapsulation to the accelerated GCM
implementation. This results in a ~10% speedup for IPsec frames of
typical size (~1420 bytes) on Cortex-A53.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Revert the changes that added p10-aes-gcm:

	0781bbd7 ("crypto: p10-aes-gcm - A perl script to process PowerPC assembler source")
	41a6437a ("crypto: p10-aes-gcm - Supporting functions for ghash")
	3b47ecca ("crypto: p10-aes-gcm - Supporting functions for AES")
	ca68a96c ("crypto: p10-aes-gcm - An accelerated AES/GCM stitched implementation")
	cc40379b ("crypto: p10-aes-gcm - Glue code for AES/GCM stitched implementation")
	3c657e86 ("crypto: p10-aes-gcm - Update Kconfig and Makefile")

These changes fail to build in many configurations and are not ready
for prime time.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

At least the D1 variant requires a separate clock for the TRNG.
Without this clock enabled, reading from /dev/hwrng reports:

   sun8i-ce 3040000.crypto: DMA timeout for TRNG (tm=96) on flow 3

Experimentation shows that the necessary clock is the SoC's internal
RC oscillator. This makes sense, as noise from the oscillator can be
used as a source of entropy.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

D1 has a crypto engine similar to the one in other Allwinner SoCs.
Like H6, it has a separate MBUS clock gate.

It also requires the internal RC oscillator to be enabled for the TRNG
to return data, presumably because noise from the oscillator is used as
an entropy source. This is likely the case for earlier variants as well,
but it really only matters for H616 and newer SoCs, as H6 provides no
way to disable the internal oscillator.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add device tree binding documentation for the Aspeed
Advanced High-Performance Bus (AHB) Controller.
Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add device tree binding documentation for the Aspeed
ECDSA/RSA ACRY Engines Controller.
Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add acry & ahbc node to device tree for AST2600.
Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

ACRY Engine is designed to accelerate the throughput of
ECDSA/RSA signature and verification.

This patch aims to add ACRY RSA engine driver for hardware
acceleration.
Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The skcipher walk API implementation avoids scatterwalk_map() for
mapping the source and destination buffers, and invokes kmap_atomic()
directly if the buffer in question is not in low memory (which can only
happen on 32-bit architectures). This avoids some overhead on 64-bit
architectures, and most notably, permits the skcipher code to run with
preemption enabled.

Now that scatterwalk_map() has been updated to use kmap_local(), none of
this is needed, so we can simply use scatterwalk_map/unmap instead.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This perl code is taken from the OpenSSL project and added gcm_init_htable function
used in the p10-aes-gcm-glue.c code to initialize hash table.  gcm_hash_p8 is used
to hash encrypted data blocks.
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This code is taken from CRYPTOGAMs[1].  The following functions are used,
aes_p8_set_encrypt_key is used to generate AES round keys and aes_p8_encrypt is used
to encrypt single block.
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>