Goodix i2c-hid touchscreens are mostly i2c-hid compliant but have some
special power sequencing requirements, including the need to drive a
reset line during the sequencing.

Let's use the new rejiggering of i2c-hid to support this with a thin
wrapper driver to support the first Goodix i2c-hid touchscreen:
GT7375P
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

This adds new bindings for the Goodix GT7375P touchscreen.  While this
touchscreen's communications are based on the generic "i2c-over-hid"
protocol, it needs special power sequencing and thus gets its own
compatible and bindings.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

The i2c-hid driver has been split in two.  Let's enable both halves.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

This patch rejiggers the i2c-hid code so that the OF (Open Firmware
aka Device Tree) and ACPI support is separated out a bit.  The OF and
ACPI drivers are now separate modules that wrap the core module.

Essentially, what we're doing here:
* Make "power up" and "power down" a function that can be (optionally)
  implemented by a given user of the i2c-hid core.
* The OF and ACPI modules are drivers on their own, so they implement
  probe / remove / suspend / resume / shutdown.  The core code
  provides implementations that OF and ACPI can call into.

We'll organize this so that we now have 3 modules: the old i2c-hid
module becomes the "core" module and two new modules will depend on
it, handling probing the specific device.

As part of this work, we'll remove the i2c-hid "platform data"
concept since it's not needed.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

Pull HID fixes from Jiri Kosina:

 - memory leak fix for Wacom driver (Ping Cheng)

 - various trivial small fixes, cleanups and device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: logitech-hidpp: Add product ID for MX Ergo in Bluetooth mode
  HID: Ignore battery for Elan touchscreen on ASUS UX550
  HID: logitech-dj: add the G602 receiver
  HID: wiimote: remove h from printk format specifier
  HID: uclogic: remove h from printk format specifier
  HID: sony: select CONFIG_CRC32
  HID: sfh: fix address space confusion
  HID: multitouch: Enable multi-input for Synaptics pointstick/touchpad device
  HID: wacom: Fix memory leakage caused by kfifo_alloc

The Logitech MX Ergo trackball supports HID++ 4.5 over Bluetooth. Add its
product ID to the table so we can get battery monitoring support.
(The hid-logitech-hidpp driver already recognizes it when connected via
a Unifying Receiver.)

[jkosina@suse.cz: fix whitespace damage]
Signed-off-by: Nicholas Miell <nmiell@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull sound fixes from Takashi Iwai:
 "Here are some piled fixes, hopefully the last big one for 5.11.

  All changes are device-specific small fixes, and majority of commits
  are for ASoC while USB-audio got a bit large changes for addressing
  the regression for devices with quirks"

* tag 'sound-5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (31 commits)
  ALSA: hda/hdmi - enable runtime pm for CI AMD display audio
  ALSA: firewire-tascam: Fix integer overflow in midi_port_work()
  ALSA: fireface: Fix integer overflow in transmit_midi_msg()
  ALSA: hda/tegra: fix tegra-hda on tegra30 soc
  clk: tegra30: Add hda clock default rates to clock driver
  ALSA: doc: Fix reference to mixart.rst
  ALSA: usb-audio: Fix implicit feedback sync setup for Pioneer devices
  ALSA: usb-audio: Annotate the endpoint index in audioformat
  ALSA: usb-audio: Avoid unnecessary interface re-setup
  ALSA: usb-audio: Choose audioformat of a counter-part substream
  ALSA: usb-audio: Fix the missing endpoints creations for quirks
  ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machines
  ASoC: AMD Renoir - add DMI entry for Lenovo ThinkPad X395
  ASoC: amd: Replacing MSI with Legacy IRQ model
  ASoC: AMD Renoir - add DMI entry for Lenovo ThinkPad E14 Gen 2
  ASoC: meson: axg-tdm-interface: fix loopback
  ASoC: meson: axg-tdmin: fix axg skew offset
  ASoC: max98373: don't access volatile registers in bias level off
  ASoC: rt711: mutex between calibration and power state changes
  ASoC: Intel: haswell: Add missing pm_ops
  ...

Pull NFS client fixes from Trond Myklebust:
 "Highlights include:

   - Fix parsing of link-local IPv6 addresses

   - Fix confusing logging of mount errors that was introduced by the
     fsopen() patchset.

   - Fix a tracing use after free in _nfs4_do_setlk()

   - Layout return-on-close fixes when called from nfs4_evict_inode()

   - Layout segments were being leaked in
     pnfs_generic_clear_request_commit()

   - Don't leak DS commits in pnfs_generic_retry_commit()

   - Fix an Oopsable use-after-free when nfs_delegation_find_inode_server()
     calls iput() on an inode after the super block has gone away"

* tag 'nfs-for-5.11-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFS: nfs_igrab_and_active must first reference the superblock
  NFS: nfs_delegation_find_inode_server must first reference the superblock
  NFS/pNFS: Fix a leak of the layout 'plh_outstanding' counter
  NFS/pNFS: Don't leak DS commits in pnfs_generic_retry_commit()
  NFS/pNFS: Don't call pnfs_free_bucket_lseg() before removing the request
  pNFS: Stricter ordering of layoutget and layoutreturn
  pNFS: Clean up pnfs_layoutreturn_free_lsegs()
  pNFS: We want return-on-close to complete when evicting the inode
  pNFS: Mark layout for return if return-on-close was not sent
  net: sunrpc: interpret the return value of kstrtou32 correctly
  NFS: Adjust fs_context error logging
  NFS4: Fix use-after-free in trace_event_raw_event_nfs4_set_lock

Pull SCSI target fix from Martin Petersen:
 "This addresses an issue in the SCSI target subsystem. A connected
  initiator could specify IDs for any configured backing store device,
  not just the ones explicitly made visible to the host.

  The remedy is to honor the access control list when doing ID
  descriptor lookups"

* tag 'mkp-scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi:
  scsi: target: Fix XCOPY NAA identifier lookup

We are able to power down the GPU and audio via the GPU driver
so flag these asics as supporting runtime pm.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20210105175245.963451-1-alexander.deucher@amd.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

As snd_fw_async_midi_port.consume_bytes is unsigned int, and
NSEC_PER_SEC is 1000000000L, the second multiplication in

    port->consume_bytes * 8 * NSEC_PER_SEC / 31250

always overflows on 32-bit platforms, truncating the result.  Fix this
by precalculating "NSEC_PER_SEC / 31250", which is an integer constant.

Note that this assumes port->consume_bytes <= 16777.

Fixes: 531f4718 ("ALSA: firewire-lib/firewire-tascam: localize async midi port")
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210111130251.361335-3-geert+renesas@glider.beSigned-off-by: Takashi Iwai <tiwai@suse.de>

As snd_ff.rx_bytes[] is unsigned int, and NSEC_PER_SEC is 1000000000L,
the second multiplication in

    ff->rx_bytes[port] * 8 * NSEC_PER_SEC / 31250

always overflows on 32-bit platforms, truncating the result.  Fix this
by precalculating "NSEC_PER_SEC / 31250", which is an integer constant.

Note that this assumes ff->rx_bytes[port] <= 16777.

Fixes: 19174295 ("ALSA: fireface: add transaction support")
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210111130251.361335-2-geert+renesas@glider.beSigned-off-by: Takashi Iwai <tiwai@suse.de>

Currently hda on tegra30 fails to open a stream with an input/output error.

For example:
speaker-test -Dhw:0,3 -c 2

speaker-test 1.2.2

Playback device is hw:0,3
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 64 to 16384
Period size range from 32 to 8192
Using max buffer size 16384
Periods = 4
was set period_size = 4096
was set buffer_size = 16384
 0 - Front Left
Write error: -5,Input/output error
xrun_recovery failed: -5,Input/output error
Transfer failed: Input/output error

The tegra-hda device was introduced in tegra30 but only utilized in
tegra124 until recent chips. Tegra210/186 work only due to a hardware
change. For this reason it is unknown when this issue first manifested.
Discussions with the hardware team show this applies to all current tegra
chips. It has been resolved in the tegra234, which does not have hda
support at this time.

The explanation from the hardware team is this:
Below is the striping formula referenced from HD audio spec.
   { ((num_channels * bits_per_sample) / number of SDOs) >= 8 }

The current issue is seen because Tegra HW has a problem with boundary
condition (= 8) for striping. The reason why it is not seen on
Tegra210/Tegra186 is because it uses max 2SDO lines. Max SDO lines is
read from GCAP register.

For the given stream (channels = 2, bps = 16);
ratio = (channels * bps) / NSDO = 32 / NSDO;

On Tegra30,      ratio = 32/4 = 8  (FAIL)
On Tegra210/186, ratio = 32/2 = 16 (PASS)
On Tegra194,     ratio = 32/4 = 8  (FAIL) ==> Earlier workaround was
applied for it

If Tegra210/186 is forced to use 4SDO, it fails there as well. So the
behavior is consistent across all these chips.

Applying the fix in [1] universally resolves this issue on tegra30-hda.
Tested on the Ouya game console and the tf201 tablet.

[1] commit 60019d8c ("ALSA: hda/tegra: workaround playback failure on
Tegra194")
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Ion Agorria <ion@agorria.com>
Reviewed-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20210108135913.2421585-3-pgwipeout@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Current implementation defaults the hda clocks to clk_m. This causes hda
to run too slow to operate correctly. Fix this by defaulting to pll_p and
setting the frequency to the correct rate.

This matches upstream t124 and downstream t30.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Ion Agorria <ion@agorria.com>
Acked-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20210108135913.2421585-2-pgwipeout@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

MIXART.txt has been converted to ReST and renamed. Fix the reference
in alsa-configuration.rst.

Fixes: 3d8e8186 ("ALSA: doc: ReSTize MIXART.txt")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210101221942.1068388-1-j.neuschaefer@gmx.netSigned-off-by: Takashi Iwai <tiwai@suse.de>

Pull tracing fix from Steven Rostedt:
 "Blacklist properly on all archs.

  The code to blacklist notrace functions for kprobes was not using the
  right kconfig option, which caused some archs (powerpc) to possibly
  not blacklist them"

* tag 'trace-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing/kprobes: Do the notrace functions check without kprobes on ftrace

Pull btrfs fixes from David Sterba:
 "More material for stable trees.

   - tree-checker: check item end overflow

   - fix false warning during relocation regarding extent type

   - fix inode flushing logic, caused notable performance regression
     (since 5.10)

   - debugging fixups:
      - print correct offset for reloc tree key
      - pass reliable fs_info pointer to error reporting helper"

* tag 'for-5.11-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: shrink delalloc pages instead of full inodes
  btrfs: reloc: fix wrong file extent type check to avoid false ENOENT
  btrfs: tree-checker: check if chunk item end overflows
  btrfs: prevent NULL pointer dereference in extent_io_tree_panic
  btrfs: print the actual offset in btrfs_root_name

When attempting to match EXTENDED COPY CSCD descriptors with corresponding
se_devices, target_xcopy_locate_se_dev_e4() currently iterates over LIO's
global devices list which includes all configured backstores.

This change ensures that only initiator-accessible backstores are
considered during CSCD descriptor lookup, according to the session's
se_node_acl LUN list.

To avoid LUN removal race conditions, device pinning is changed from being
configfs based to instead using the se_node_acl lun_ref.

Reference: CVE-2020-28374
Fixes: cbf031f4 ("target: Add support for EXTENDED_COPY copy offload emulation")
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Enable the notrace function check on the architecture which doesn't
support kprobes on ftrace but support dynamic ftrace. This notrace
function check is not only for the kprobes on ftrace but also
sw-breakpoint based kprobes.
Thus there is no reason to limit this check for the arch which
supports kprobes on ftrace.

This also changes the dependency of Kconfig. Because kprobe event
uses the function tracer's address list for identifying notrace
function, if the CONFIG_DYNAMIC_FTRACE=n, it can not check whether
the target function is notrace or not.

Link: https://lkml.kernel.org/r/20210105065730.2634785-1-naveen.n.rao@linux.vnet.ibm.com
Link: https://lkml.kernel.org/r/161007957862.114704.4512260007555399463.stgit@devnote2

Cc: stable@vger.kernel.org
Fixes: 45408c4f ("tracing: kprobes: Prohibit probing on notrace function")
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Pull nfsd fixes from Chuck Lever:

 - Fix major TCP performance regression

 - Get NFSv4.2 READ_PLUS regression tests to pass

 - Improve NFSv4 COMPOUND memory allocation

 - Fix sparse warning

* tag 'nfsd-5.11-1' of git://git.linux-nfs.org/projects/cel/cel-2.6:
  NFSD: Restore NFSv4 decoding's SAVEMEM functionality
  SUNRPC: Handle TCP socket sends with kernel_sendpage() again
  NFSD: Fix sparse warning in nfssvc.c
  nfsd: Don't set eof on a truncated READ_PLUS
  nfsd: Fixes for nfsd4_encode_read_plus_data()

Merge tag 'hyperv-fixes-signed-20210111' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv fixes from Wei Liu:

  - fix kexec panic/hang (Dexuan Cui)

  - fix occasional crashes when flushing TLB (Wei Liu)

* tag 'hyperv-fixes-signed-20210111' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  x86/hyperv: check cpu mask after interrupt has been disabled
  x86/hyperv: Fix kexec panic/hang issues

Before referencing the inode, we must ensure that the superblock can be
referenced. Otherwise, we can end up with iput() calling superblock
operations that are no longer valid or accessible.

Fixes: ea7c38fe ("NFSv4: Ensure we reference the inode for return-on-close in delegreturn")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Before referencing the inode, we must ensure that the superblock can be
referenced. Otherwise, we can end up with iput() calling superblock
operations that are no longer valid or accessible.

Fixes: e39d8a18 ("NFSv4: Fix an Oops during delegation callbacks")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Merge tag 'kbuild-fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Search for <ncurses.h> in the default header path of HOSTCC

 - Tweak the option order to be kind to old BSD awk

 - Remove 'kvmconfig' and 'xenconfig' shorthands

 - Fix documentation

* tag 'kbuild-fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  Documentation: kbuild: Fix section reference
  kconfig: remove 'kvmconfig' and 'xenconfig' shorthands
  lib/raid6: Let $(UNROLL) rules work with macOS userland
  kconfig: Support building mconf with vendor sysroot ncurses
  kconfig: config script: add a little user help
  MAINTAINERS: adjust GCC PLUGINS after gcc-plugin.sh removal

Pull SCSI fixes from James Bottomley:
 "This is two driver fixes (megaraid_sas and hisi_sas).

  The megaraid one is a revert of a previous revert of a cpu hotplug fix
  which exposed a bug in the block layer which has been fixed in this
  merge window.

  The hisi_sas performance enhancement comes from switching to interrupt
  managed completion queues, which depended on the addition of
  devm_platform_get_irqs_affinity() which is now upstream via the irq
  tree in the last merge window"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: hisi_sas: Expose HW queues for v2 hw
  Revert "Revert "scsi: megaraid_sas: Added support for shared host tagset for cpuhotplug""

Pull block fixes from Jens Axboe:

 - Missing CRC32 selections (Arnd)

 - Fix for a merge window regression with bdev inode init (Christoph)

 - bcache fixes

 - rnbd fixes

 - NVMe pull request from Christoph:
    - fix a race in the nvme-tcp send code (Sagi Grimberg)
    - fix a list corruption in an nvme-rdma error path (Israel Rukshin)
    - avoid a possible double fetch in nvme-pci (Lalithambika Krishnakumar)
    - add the susystem NQN quirk for a Samsung driver (Gopal Tiwari)
    - fix two compiler warnings in nvme-fcloop (James Smart)
    - don't call sleeping functions from irq context in nvme-fc (James Smart)
    - remove an unused argument (Max Gurtovoy)
    - remove unused exports (Minwoo Im)

 - Use-after-free fix for partition iteration (Ming)

 - Missing blk-mq debugfs flag annotation (John)

 - Bdev freeze regression fix (Satya)

 - blk-iocost NULL pointer deref fix (Tejun)

* tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-block: (26 commits)
  bcache: set bcache device into read-only mode for BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET
  bcache: introduce BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE for large bucket
  bcache: check unsupported feature sets for bcache register
  bcache: fix typo from SUUP to SUPP in features.h
  bcache: set pdev_set_uuid before scond loop iteration
  blk-mq-debugfs: Add decode for BLK_MQ_F_TAG_HCTX_SHARED
  block/rnbd-clt: avoid module unload race with close confirmation
  block/rnbd: Adding name to the Contributors List
  block/rnbd-clt: Fix sg table use after free
  block/rnbd-srv: Fix use after free in rnbd_srv_sess_dev_force_close
  block/rnbd: Select SG_POOL for RNBD_CLIENT
  block: pre-initialize struct block_device in bdev_alloc_inode
  fs: Fix freeze_bdev()/thaw_bdev() accounting of bd_fsfreeze_sb
  nvme: remove the unused status argument from nvme_trace_bio_complete
  nvmet-rdma: Fix list_del corruption on queue establishment failure
  nvme: unexport functions with no external caller
  nvme: avoid possible double fetch in handling CQE
  nvme-tcp: Fix possible race of io_work and direct send
  nvme-pci: mark Samsung PM1725a as IGNORE_DEV_SUBNQN
  nvme-fcloop: Fix sscanf type and list_first_entry_or_null warnings
  ...

Pull io_uring fixes from Jens Axboe:
 "A bit larger than I had hoped at this point, but it's all changes that
  will be directed towards stable anyway. In detail:

   - Fix a merge window regression on error return (Matthew)

   - Remove useless variable declaration/assignment (Ye Bin)

   - IOPOLL fixes (Pavel)

   - Exit and cancelation fixes (Pavel)

   - fasync lockdep complaint fix (Pavel)

   - Ensure SQPOLL is synchronized with creator life time (Pavel)"

* tag 'io_uring-5.11-2021-01-10' of git://git.kernel.dk/linux-block:
  io_uring: stop SQPOLL submit on creator's death
  io_uring: add warn_once for io_uring_flush()
  io_uring: inline io_uring_attempt_task_drop()
  io_uring: io_rw_reissue lockdep annotations
  io_uring: synchronise ev_posted() with waitqueues
  io_uring: dont kill fasync under completion_lock
  io_uring: trigger eventfd for IOPOLL
  io_uring: Fix return value from alloc_fixed_file_ref_node
  io_uring: Delete useless variable ‘id’ in io_prep_async_work
  io_uring: cancel more aggressively in exit_work
  io_uring: drop file refs after task cancel
  io_uring: patch up IOPOLL overflow_flush sync
  io_uring: synchronise IOPOLL on task_submit fail

Pull USB fixes from Greg KH:
 "Here are a number of small USB driver fixes for 5.11-rc3.

  Include in here are:

   - USB gadget driver fixes for reported issues

   - new usb-serial driver ids

   - dma from stack bugfixes

   - typec bugfixes

   - dwc3 bugfixes

   - xhci driver bugfixes

   - other small misc usb driver bugfixes

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits)
  usb: dwc3: gadget: Clear wait flag on dequeue
  usb: typec: Send uevent for num_altmodes update
  usb: typec: Fix copy paste error for NVIDIA alt-mode description
  usb: gadget: enable super speed plus
  kcov, usb: hide in_serving_softirq checks in __usb_hcd_giveback_urb
  usb: uas: Add PNY USB Portable SSD to unusual_uas
  usb: gadget: configfs: Preserve function ordering after bind failure
  usb: gadget: select CONFIG_CRC32
  usb: gadget: core: change the comment for usb_gadget_connect
  usb: gadget: configfs: Fix use-after-free issue with udc_name
  usb: dwc3: gadget: Restart DWC3 gadget when enabling pullup
  usb: usbip: vhci_hcd: protect shift size
  USB: usblp: fix DMA to stack
  USB: serial: iuu_phoenix: fix DMA from stack
  USB: serial: option: add LongSung M5710 module support
  USB: serial: option: add Quectel EM160R-GL
  USB: Gadget: dummy-hcd: Fix shift-out-of-bounds bug
  usb: gadget: f_uac2: reset wMaxPacketSize
  usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression
  usb: dwc3: ulpi: Replace CPU-based busyloop with Protocol-based one
  ...

Pull staging driver fixes from Greg KH:
 "Here are some small staging driver fixes for 5.11-rc3. Nothing major,
  just resolving some reported issues:

   - cleanup some remaining mentions of the ION drivers that were
     removed in 5.11-rc1

   - comedi driver bugfix

   - two error path memory leak fixes

  All have been in linux-next for a while with no reported issues"

* tag 'staging-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: ION: remove some references to CONFIG_ION
  staging: mt7621-dma: Fix a resource leak in an error handling path
  Staging: comedi: Return -EFAULT if copy_to_user() fails
  staging: spmi: hisi-spmi-controller: Fix some error handling paths

Pull char/misc driver fixes from Greg KH:
 "Here are some small char and misc driver fixes for 5.11-rc3.

  The majority here are fixes for the habanalabs drivers, but also in
  here are:

   - crypto driver fix

   - pvpanic driver fix

   - updated font file

   - interconnect driver fixes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits)
  Fonts: font_ter16x32: Update font with new upstream Terminus release
  misc: pvpanic: Check devm_ioport_map() for NULL
  speakup: Add github repository URL and bug tracker
  MAINTAINERS: Update Georgi's email address
  crypto: asym_tpm: correct zero out potential secrets
  habanalabs: Fix memleak in hl_device_reset
  interconnect: imx8mq: Use icc_sync_state
  interconnect: imx: Remove a useless test
  interconnect: imx: Add a missing of_node_put after of_device_is_available
  interconnect: qcom: fix rpmh link failures
  habanalabs: fix order of status check
  habanalabs: register to pci shutdown callback
  habanalabs: add validation cs counter, fix misplaced counters
  habanalabs/gaudi: retry loading TPC f/w on -EINTR
  habanalabs: adjust pci controller init to new firmware
  habanalabs: update comment in hl_boot_if.h
  habanalabs/gaudi: enhance reset message
  habanalabs: full FW hard reset support
  habanalabs/gaudi: disable CGM at HW initialization
  habanalabs: Revise comment to align with mirror list name
  ...

Section 3.11 was incorrectly called 3.9, fix it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Pull ARC fixes from Vineet Gupta:

 - Address the 2nd boot failure due to snafu in signal handling code
   (first was generic console ttynull issue)

 - misc other fixes

* tag 'arc-5.11-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: [hsdk]: Enable FPU_SAVE_RESTORE
  ARC: unbork 5.11 bootup: fix snafu in _TIF_NOTIFY_SIGNAL handling
  include/soc: remove headers for EZChip NPS
  arch/arc: add copy_user_page() to <asm/page.h> to fix build error on ARC

Pull powerpc fixes from Michael Ellerman:

 - A fix for machine check handling with VMAP stack on 32-bit.

 - A clang build fix.

Thanks to Christophe Leroy and Nathan Chancellor.

* tag 'powerpc-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc: Handle .text.{hot,unlikely}.* in linker script
  powerpc/32s: Fix RTAS machine check with VMAP stack

Pull x86 fixes from Borislav Petkov:
 "As expected, fixes started trickling in after the holidays so here is
  the accumulated pile of x86 fixes for 5.11:

   - A fix for fanotify_mark() missing the conversion of x86_32 native
     syscalls which take 64-bit arguments to the compat handlers due to
     former having a general compat handler. (Brian Gerst)

   - Add a forgotten pmd page destructor call to pud_free_pmd_page()
     where a pmd page is freed. (Dan Williams)

   - Make IN/OUT insns with an u8 immediate port operand handling for
     SEV-ES guests more precise by using only the single port byte and
     not the whole s32 value of the insn decoder. (Peter Gonda)

   - Correct a straddling end range check before returning the proper
     MTRR type, when the end address is the same as top of memory.
     (Ying-Tsun Huang)

   - Change PQR_ASSOC MSR update scheme when moving a task to a resctrl
     resource group to avoid significant performance overhead with some
     resctrl workloads. (Fenghua Yu)

   - Avoid the actual task move overhead when the task is already in the
     resource group. (Fenghua Yu)"

* tag 'x86_urgent_for_v5.11_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/resctrl: Don't move a task to the same resource group
  x86/resctrl: Use an IPI instead of task_work_add() to update PQR_ASSOC MSR
  x86/mtrr: Correct the range check before performing MTRR type lookups
  x86/sev-es: Fix SEV-ES OUT/IN immediate opcode vc handling
  x86/mm: Fix leak of pmd ptlock
  fanotify: Fix sys_fanotify_mark() on native x86-32

If we exit _lgopen_prepare_attached() without setting a layout, we will
currently leak the plh_outstanding counter.

Fixes: 411ae722 ("pNFS: Wait for stale layoutget calls to complete in pnfs_update_layout()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

We must ensure that we pass a layout segment to nfs_retry_commit() when
we're cleaning up after pnfs_bucket_alloc_ds_commits(). Otherwise,
requests that should be committed to the DS will get committed to the
MDS.
Do so by ensuring that pnfs_bucket_get_committing() always tries to
return a layout segment when it returns a non-empty page list.

Fixes: c84bea59 ("NFS/pNFS: Simplify bucket layout segment reference counting")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

In pnfs_generic_clear_request_commit(), we try calling
pnfs_free_bucket_lseg() before we remove the request from the DS bucket.
That will always fail, since the point is to test for whether or not
that bucket is empty.

Fixes: c84bea59 ("NFS/pNFS: Simplify bucket layout segment reference counting")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

If a layout return is in progress, we should wait for it to complete,
in case the layout segment we are picking up gets returned too.

Fixes: 30cb3ee2 ("pNFS: Handle NFS4ERR_OLD_STATEID on layoutreturn by bumping the state seqid")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Remove the check for whether or not the stateid is NULL, and fix up the
callers.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>