Pull kgdb updates from Daniel Thompson:
 "Just two patches for you this time!

   - During a panic, flush the console before entering kgdb.

     This makes things a little easier to comprehend, especially if an
     NMI backtrace was triggered on all CPUs just before we enter the
     panic routines

   - Correcting a couple of misleading (a.k.a. plain wrong) comments"

* tag 'kgdb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
  kdb: Corrects comment for kdballocenv
  kgdb: Flush console before entering kgdb on panic

Pull RISC-V updates from Palmer Dabbelt:

 - Support for cbo.zero in userspace

 - Support for CBOs on ACPI-based systems

 - A handful of improvements for the T-Head cache flushing ops

 - Support for software shadow call stacks

 - Various cleanups and fixes

* tag 'riscv-for-linus-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (31 commits)
  RISC-V: hwprobe: Fix vDSO SIGSEGV
  riscv: configs: defconfig: Enable configs required for RZ/Five SoC
  riscv: errata: prefix T-Head mnemonics with th.
  riscv: put interrupt entries into .irqentry.text
  riscv: mm: Update the comment of CONFIG_PAGE_OFFSET
  riscv: Using TOOLCHAIN_HAS_ZIHINTPAUSE marco replace zihintpause
  riscv/mm: Fix the comment for swap pte format
  RISC-V: clarify the QEMU workaround in ISA parser
  riscv: correct pt_level name via pgtable_l5/4_enabled
  RISC-V: Provide pgtable_l5_enabled on rv32
  clocksource: timer-riscv: Increase rating of clock_event_device for Sstc
  clocksource: timer-riscv: Don't enable/disable timer interrupt
  lkdtm: Fix CFI_BACKWARD on RISC-V
  riscv: Use separate IRQ shadow call stacks
  riscv: Implement Shadow Call Stack
  riscv: Move global pointer loading to a macro
  riscv: Deduplicate IRQ stack switching
  riscv: VMAP_STACK overflow detection thread-safe
  RISC-V: cacheflush: Initialize CBO variables on ACPI systems
  RISC-V: ACPI: RHCT: Add function to get CBO block sizes
  ...

Pull more power management updates from Rafael Wysocki:
 "These add new hardware support to a cpufreq driver and fix cpupower
  utility documentation:

   - Add support for several Qualcomm SoC versions to the Qualcomm
     cpufreq driver (Robert Marko, Varadarajan Narayanan)

   - Fix a reference to a removed document in the cpupower utility
     documentation (Vegard Nossum)"

* tag 'pm-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: qcom-nvmem: Introduce cpufreq for ipq95xx
  cpufreq: qcom-nvmem: Enable cpufreq for ipq53xx
  cpufreq: qcom-nvmem: add support for IPQ8074
  cpupower: fix reference to nonexistent document

Pull more drm updates from Dave Airlie:
 "Geert pointed out I missed the renesas reworks in my main pull, so
  this pull contains the renesas next work for atomic conversion and DT
  support.

  It also contains a bunch of amdgpu and some small ssd13xx fixes.

  renesas:
   - atomic conversion
   - DT support

  ssd13xx:
   - dt binding fix for ssd132x
   - Initialize ssd130x crtc_state to NULL.

  amdgpu:
   - Fix RAS support check
   - RAS fixes
   - MES fixes
   - SMU13 fixes
   - Contiguous memory allocation fix
   - BACO fixes
   - GPU reset fixes
   - Min power limit fixes
   - GFX11 fixes
   - USB4/TB hotplug fixes
   - ARM regression fix
   - GFX9.4.3 fixes
   - KASAN/KCSAN stack size check fixes
   - SR-IOV fixes
   - SMU14 fixes
   - PSP13 fixes
   - Display blend fixes
   - Flexible array size fixes

  amdkfd:
   - GPUVM fix

  radeon:
   - Flexible array size fixes"

* tag 'drm-next-2023-11-07' of git://anongit.freedesktop.org/drm/drm: (83 commits)
  drm/amd/display: Enable fast update on blendTF change
  drm/amd/display: Fix blend LUT programming
  drm/amd/display: Program plane color setting correctly
  drm/amdgpu: Query and report boot status
  drm/amdgpu: Add psp v13 function to query boot status
  drm/amd/swsmu: remove fw version check in sw_init.
  drm/amd/swsmu: update smu v14_0_0 driver if and metrics table
  drm/amdgpu: Add C2PMSG_109/126 reg field shift/masks
  drm/amdgpu: Optimize the asic type fix code
  drm/amdgpu: fix GRBM read timeout when do mes_self_test
  drm/amdgpu: check recovery status of xgmi hive in ras_reset_error_count
  drm/amd/pm: only check sriov vf flag once when creating hwmon sysfs
  drm/amdgpu: Attach eviction fence on alloc
  drm/amdkfd: Improve amdgpu_vm_handle_moved
  drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml2
  drm/amd/display: Avoid NULL dereference of timing generator
  drm/amdkfd: Update cache info for GFX 9.4.3
  drm/amdkfd: Populate cache info for GFX 9.4.3
  drm/amdgpu: don't put MQDs in VRAM on ARM | ARM64
  drm/amdgpu/smu13: drop compute workload workaround
  ...

Merge tag 'regmap-fix-v6.7-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

Pull regmap fix from Mark Brown:
 "One fix here, for an interaction between noinc registers and caches.

  If a device uses noinc registers (which is rare) then we could corrupt
  registers after the noinc register in the cache"

* tag 'regmap-fix-v6.7-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: prevent noinc writes from clobbering cache

Pull remoteproc updates from Bjorn Andersson:
 "Support for controlling the second core in Mediatek's SCP dual-core
  setup is introduced.

  Support for audio, compute and modem DSPs on Qualcomm SM6375, and the
  audio DSP in SC7180 are introduced. The peripheral NoC clock is
  dropped from MSM8996 modem DSP, as this is handled through the
  interconnect provider.

  In the zynqmp driver the setup for TCM memory, and device address
  translation thereof, when operating in lockstep mode is corrected.

  A few bug fixes and cleanups are introduces across the ST and STM32
  remoteproc drivers"

* tag 'rproc-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (28 commits)
  remoteproc: st: Fix sometimes uninitialized ret in st_rproc_probe()
  remoteproc: st: Use device_get_match_data()
  remoteproc: zynqmp: Change tcm address translation method
  remoteproc: mediatek: Refactor single core check and fix retrocompatibility
  remoteproc: qcom: q6v5-mss: Remove PNoC clock from 8996 MSS
  dt-bindings: remoteproc: qcom,msm8996-mss-pil: Remove PNoC clock
  dt-bindings: remoteproc: qcom,adsp: Remove AGGRE2 clock
  remoteproc: qcom: pas: Add SM6375 MPSS
  remoteproc: qcom: pas: Add SM6375 ADSP & CDSP
  dt-bindings: remoteproc: qcom,sm6375-pas: Document remoteprocs
  dt-bindings: remoteproc: pru: Add Interrupt property
  remoteproc: qcom: pas: Add sc7180 adsp
  dt-bindings: remoteproc: qcom: sc7180-pas: Add ADSP compatible
  arm64: dts: mediatek: Update the node name of SCP rpmsg subnode
  remoteproc: zynqmp: fix TCM carveouts in lockstep mode
  remoteproc: mediatek: Refine ipi handler error message
  remoteproc: mediatek: Report watchdog crash to all cores
  remoteproc: mediatek: Handle MT8195 SCP core 1 watchdog timeout
  remoteproc: mediatek: Setup MT8195 SCP core 1 SRAM offset
  remoteproc: mediatek: Remove dependency of MT8195 SCP L2TCM power control on dual-core SCP
  ...

Pull rpmsg updates from Bjorn Andersson:
 "This replaces a number of strncpy() instances with strscpy() or
  strscpy_pad() through the rpmsg core and virtio implementation"

* tag 'rpmsg-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  rpmsg: virtio: Replace deprecated strncpy with strscpy/_pad
  rpmsg: Replace deprecated strncpy with strscpy_pad
  rpmsg: core: Replace deprecated strncpy with strscpy

Pull PCMCIA updates from Dominik Brodowski:
 "Cleanups and fixes.

  Yang Yingliang has fixed a number of resource leaks and Dongliang Mu
  contributed a spelling fix for the PCMCIA core. Also included is a
  tiny clenaup to the tcic PCMCIA socket driver provided by lizhe"

* tag 'pcmcia-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
  pcmcia: tcic: remove unneeded "&" in call to setup_timer()
  pcmcia: typo fix
  pcmcia: ds: fix possible name leak in error path in pcmcia_device_add()
  pcmcia: ds: fix refcount leak in pcmcia_device_add()
  pcmcia: cs: fix possible hung task and memory leak pccardd()

Merge tag 'gpio-pinctrl-updates-for-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio/pinctrl updates from Bartosz Golaszewski:
 "The bulk of it is a rework of the glue layer between pinctrl and GPIO.
  We changed the signature of GPIO helpers for pinctrl to taking the
  gpio_chip/offset pair as arguments instead of using the deprecated
  global GPIO numberspace.

  The last little bit is removing the gpiochip_find() function as it now
  has no more users in-tree.

  Summary:

   - rework the GPIO-to-pinctrl glue code to stop using the deprecated
     global GPIO numberspace

   - remove now unused wrappers around pinctrl GPIO helpers from drivers

   - remove gpiochip_find() as it has no more users"

* tag 'gpio-pinctrl-updates-for-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (70 commits)
  pinctrl: tegra: drop the wrapper around pinctrl_gpio_request()
  pinctrl: em: drop the wrapper around pinctrl_gpio_request()
  pinctrl: nuvoton: npcm8xx: drop wrappers around pinctrl_gpio_request/free()
  pinctrl: nuvoton: npcm7xx: drop wrappers around pinctrl_gpio_request/free()
  pinctrl: stm32: drop wrappers around pinctrl_gpio_free/input()
  pinctrl: starfive: jh7110: drop wrappers around pinctrl_gpio_request/free()
  pinctrl: starfive: jh7100: drop wrappers around pinctrl_gpio_request/free()
  pinctrl: ocelot: drop the wrapper around pinctrl_gpio_direction_input()
  pinctrl: cirrus: drop the wrapper around pinctrl_gpio_direction_input()
  pinctrl: mediatek: common: drop the wrappers around pinctrl_gpio_direction_input()
  pinctrl: mediatek: moore: drop the wrappers around pinctrl_gpio_direction_input()
  pinctrl: rk805: drop the wrapper around pinctrl_gpio_direction_input()
  pinctrl: axp209: drop the wrapper around pinctrl_gpio_direction_input()
  pinctrl: vt8500: drop the wrapper around pinctrl_gpio_direction_input()
  pinctrl: as3722: drop the wrapper around pinctrl_gpio_direction_input()
  pinctrl: ingenic: drop the wrapper around pinctrl_gpio_direction_input()
  pinctrl: st: drop the wrapper around pinctrl_gpio_direction_input()
  pinctrl: change the signature of pinctrl_ready_for_gpio_range()
  pinctrl: change the signature of gpio_to_pin()
  pinctrl: change the signature of pinctrl_match_gpio_range()
  ...

Pull vfs fanotify fsid updates from Christian Brauner:
 "This work is part of the plan to enable fanotify to serve as a drop-in
  replacement for inotify. While inotify is availabe on all filesystems,
  fanotify currently isn't.

  In order to support fanotify on all filesystems two things are needed:

   (1) all filesystems need to support AT_HANDLE_FID

   (2) all filesystems need to report a non-zero f_fsid

  This contains (1) and allows filesystems to encode non-decodable file
  handlers for fanotify without implementing any exportfs operations by
  encoding a file id of type FILEID_INO64_GEN from i_ino and
  i_generation.

  Filesystems that want to opt out of encoding non-decodable file ids
  for fanotify that don't support NFS export can do so by providing an
  empty export_operations struct.

  This also partially addresses (2) by generating f_fsid for simple
  filesystems as well as freevxfs. Remaining filesystems will be dealt
  with by separate patches.

  Finally, this contains the patch from the current exportfs maintainers
  which moves exportfs under vfs with Chuck, Jeff, and Amir as
  maintainers and vfs.git as tree"

* tag 'vfs-6.7.fsid' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  MAINTAINERS: create an entry for exportfs
  fs: fix build error with CONFIG_EXPORTFS=m or not defined
  freevxfs: derive f_fsid from bdev->bd_dev
  fs: report f_fsid from s_dev for "simple" filesystems
  exportfs: support encoding non-decodeable file handles by default
  exportfs: define FILEID_INO64_GEN* file handle types
  exportfs: make ->encode_fh() a mandatory method for NFS export
  exportfs: add helpers to check if filesystem can encode/decode file handles

Pull iomap maintainership rotation from Christian Brauner:
 "As discussed on list last week this makes fs/iomap part of vfs.git
  with Darrick as main reviewer"

* tag 'vfs-6.7.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  iomap: rename iomap entry
  iomap: rotate maintainers

Pull gfs2 updates from Andreas Gruenbacher:

 - Don't update inode timestamps for direct writes (performance
   regression fix)

 - Skip no-op quota records instead of panicing

 - Fix a RCU race in gfs2_permission()

 - Various other smaller fixes and cleanups all over the place

* tag 'gfs2-v6.6-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (24 commits)
  gfs2: don't withdraw if init_threads() got interrupted
  gfs2: remove dead code in add_to_queue
  gfs2: Fix slab-use-after-free in gfs2_qd_dealloc
  gfs2: Silence "suspicious RCU usage in gfs2_permission" warning
  gfs2: fs: derive f_fsid from s_uuid
  gfs2: No longer use 'extern' in function declarations
  gfs2: Rename gfs2_lookup_{ simple => meta }
  gfs2: Convert gfs2_internal_read to folios
  gfs2: Convert stuffed_readpage to folios
  gfs2: Minor gfs2_write_jdata_batch PAGE_SIZE cleanup
  gfs2: Get rid of gfs2_alloc_blocks generation parameter
  gfs2: Add metapath_dibh helper
  gfs2: Clean up quota.c:print_message
  gfs2: Clean up gfs2_alloc_parms initializers
  gfs2: Two quota=account mode fixes
  gfs2: Stop using GFS2_BASIC_BLOCK and GFS2_BASIC_BLOCK_SHIFT
  gfs2: setattr_chown: Add missing initialization
  gfs2: fix an oops in gfs2_permission
  gfs2: ignore negated quota changes
  gfs2: Don't update inode timestamps for direct writes
  ...

Pull overlayfs updates from Amir Goldstein:

 - Overlayfs aio cleanups and fixes

   Cleanups and minor fixes in preparation for factoring out of
   read/write passthrough code.

 - Overlayfs lock ordering changes

   Hold mnt_writers only throughout copy up instead of a long lived
   elevated refcount.

 - Add support for nesting overlayfs private xattrs

   There are cases where you want to use an overlayfs mount as a
   lowerdir for another overlayfs mount. For example, if the system
   rootfs is on overlayfs due to composefs, or to make it volatile (via
   tmpfs), then you cannot currently store a lowerdir on the rootfs,
   because the inner overlayfs will eat all the whiteouts and overlay
   xattrs. This means you can't e.g. store on the rootfs a prepared
   container image for use with overlayfs.

   This adds support for nesting of overlayfs mounts by escaping the
   problematic features and unescaping them when exposing to the
   overlayfs user.

 - Add new mount options for appending lowerdirs

* tag 'ovl-update-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
  ovl: add support for appending lowerdirs one by one
  ovl: refactor layer parsing helpers
  ovl: store and show the user provided lowerdir mount option
  ovl: remove unused code in lowerdir param parsing
  ovl: Add documentation on nesting of overlayfs mounts
  ovl: Add an alternative type of whiteout
  ovl: Support escaped overlay.* xattrs
  ovl: Add OVL_XATTR_TRUSTED/USER_PREFIX_LEN macros
  ovl: Move xattr support to new xattrs.c file
  ovl: do not encode lower fh with upper sb_writers held
  ovl: do not open/llseek lower file with upper sb_writers held
  ovl: reorder ovl_want_write() after ovl_inode_lock()
  ovl: split ovl_want_write() into two helpers
  ovl: add helper ovl_file_modified()
  ovl: protect copying of realinode attributes to ovl inode
  ovl: punt write aio completion to workqueue
  ovl: propagate IOCB_APPEND flag on writes to realfile
  ovl: use simpler function to convert iocb to rw flags

Merge cpupower utility update for 6.7-rc1:

 - Fix a reference to a removed document in the cpupower utility
   documentation (Vegard Nossum).

* pm-tools:
  cpupower: fix reference to nonexistent document

Merge branch 'pm-cpufreq'

Merge additional Qualcomm cpufreq driver updates for 6.7-rc1:

 - Add support for several Qualcomm SoC versions (Robert Marko,
   Varadarajan Narayanan).

* pm-cpufreq:
  cpufreq: qcom-nvmem: Introduce cpufreq for ipq95xx
  cpufreq: qcom-nvmem: Enable cpufreq for ipq53xx
  cpufreq: qcom-nvmem: add support for IPQ8074

Pull more bcachefs updates from Kent Overstreet:
 "Here's the second big bcachefs pull request. This brings your tree up
  to date with my master branch, which is what existing bcachefs users
  are currently running.

  New features:
   - rebalance_work btree (and metadata version 1.3): the rebalance
     thread no longer has to scan to find extents that need processing -
     big scalability improvement.
   - sb_errors superblock section: this adds counters for each fsck
     error type, since filesystem creation, along with the date of the
     most recent error. It'll get us better bug reports (since users do
     not typically report errors that fsck was able to fix), and I might
     add telemetry for this in the future.

  Fixes include:
   - multiple snapshot deletion fixes
   - members_v2 fixups
   - deleted_inodes btree fixes
   - copygc thread no longer spins when a device is full but has no
     fragmented buckets (i.e. rebalance needs to move data around
     instead)
   - a fix for a memory reclaim issue with the btree key cache: we're
     now careful not to hold the srcu read lock that blocks key cache
     reclaim for too long
   - an early allocator locking fix, from Brian
   - endianness fixes, from Brian
   - CONFIG_BCACHEFS_DEBUG_TRANSACTIONS no longer defaults to y, a big
     performance improvement on multithreaded workloads"

* tag 'bcachefs-2023-11-5' of https://evilpiepirate.org/git/bcachefs: (70 commits)
  bcachefs: Improve stripe checksum error message
  bcachefs: Simplify, fix bch2_backpointer_get_key()
  bcachefs: kill thing_it_points_to arg to backpointer_not_found()
  bcachefs: bch2_ec_read_extent() now takes btree_trans
  bcachefs: bch2_stripe_to_text() now prints ptr gens
  bcachefs: Don't iterate over journal entries just for btree roots
  bcachefs: Break up bch2_journal_write()
  bcachefs: Replace ERANGE with private error codes
  bcachefs: bkey_copy() is no longer a macro
  bcachefs: x-macro-ify inode flags enum
  bcachefs: Convert bch2_fs_open() to darray
  bcachefs: Move __bch2_members_v2_get_mut to sb-members.h
  bcachefs: bch2_prt_datetime()
  bcachefs: CONFIG_BCACHEFS_DEBUG_TRANSACTIONS no longer defaults to y
  bcachefs: Add a comment for BTREE_INSERT_NOJOURNAL usage
  bcachefs: rebalance_work btree is not a snapshots btree
  bcachefs: Add missing printk newlines
  bcachefs: Fix recovery when forced to use JSET_NO_FLUSH journal entry
  bcachefs: .get_parent() should return an error pointer
  bcachefs: Fix bch2_delete_dead_inodes()
  ...

Split the exportfs entry from the nfsd entry and add myself as reviewer.
Suggested-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231026205553.143556-1-amir73il@gmail.comSigned-off-by: Christian Brauner <brauner@kernel.org>

Since this is now part of the vfs trees rename it accordingly and remove
the old tree referencing xfs.
Signed-off-by: Christian Brauner <brauner@kernel.org>

Pull media updates from Mauro Carvalho Chehab:

 - the old V4L2 core videobuf kAPI was finally removed. All media
   drivers should now be using VB2 kAPI

 - new automotive driver: mgb4

 - new platform video driver: npcm-video

 - new sensor driver: mt9m114

 - new TI driver used in conjunction with Cadence CSI2RX IP to bridge
   TI-specific parts

 - ir-rx51 was removed and the N900 DT binding was moved to the
   pwm-ir-tx generic driver

 - drop atomisp-specific ov5693, using the upstream driver instead

 - the camss driver has gained RDI3 support for VFE 17x

 - the atomisp driver now detects ISP2400 or ISP2401 at run time. No
   need to set it up at build time anymore

 - lots of driver fixes, cleanups and improvements

* tag 'media/v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (377 commits)
  media: nuvoton: VIDEO_NPCM_VCD_ECE should depend on ARCH_NPCM
  media: venus: Fix firmware path for resources
  media: venus: hfi_cmds: Replace one-element array with flex-array member and use __counted_by
  media: venus: hfi_parser: Add check to keep the number of codecs within range
  media: venus: hfi: add checks to handle capabilities from firmware
  media: venus: hfi: fix the check to handle session buffer requirement
  media: venus: hfi: add checks to perform sanity on queue pointers
  media: platform: cadence: select MIPI_DPHY dependency
  media: MAINTAINERS: Fix path for J721E CSI2RX bindings
  media: cec: meson: always include meson sub-directory in Makefile
  media: videobuf2: Fix IS_ERR checking in vb2_dc_put_userptr()
  media: platform: mtk-mdp3: fix uninitialized variable in mdp_path_config()
  media: mediatek: vcodec: using encoder device to alloc/free encoder memory
  media: imx-jpeg: notify source chagne event when the first picture parsed
  media: cx231xx: Use EP5_BUF_SIZE macro
  media: siano: Drop unnecessary error check for debugfs_create_dir/file()
  media: mediatek: vcodec: Handle invalid encoder vsi
  media: aspeed: Drop unnecessary error check for debugfs_create_file()
  Documentation: media: buffer.rst: fix V4L2_BUF_FLAG_PREPARED
  Documentation: media: gen-errors.rst: fix confusing ENOTTY description
  ...

This patch corrects the comment for the kdballocenv function.
The previous comment incorrectly described the function's
parameters and return values.
Signed-off-by: Yuran Pereira <yuran.pereira@hotmail.com>
Link: https://lore.kernel.org/r/DB3PR10MB6835B383B596133EDECEA98AE8ABA@DB3PR10MB6835.EURPRD10.PROD.OUTLOOK.COM
[daniel.thompson@linaro.org: fixed whitespace alignment in new lines]
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>

Pull RTC updates from Alexandre Belloni:
 "There is a new driver for the RTC of the Mstar SSD202D SoC. The
  rtc7301 driver gains support for byte addresses to support the
  USRobotics USR8200. Then we have many non user visible changes and
  typo fixes.

  Summary:

  Subsytem:
   - convert platform drivers to remove_new
   - prevent modpost warnings for unremovable platform drivers

  New driver:
   - Mstar SSD202D

  Drivers:
   - brcmstb-waketimer: support level alarm_irq
   - ep93xx: add DT support
   - rtc7301: support byte-addressed IO"

* tag 'rtc-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (28 commits)
  dt-bindings: rtc: Add Mstar SSD202D RTC
  rtc: Add support for the SSD202D RTC
  rtc: at91rm9200: annotate at91_rtc_remove with __exit again
  dt-bindings: rtc: microcrystal,rv3032: Document wakeup-source property
  dt-bindings: rtc: pcf8523: Convert to YAML
  dt-bindings: rtc: mcp795: move to trivial-rtc
  rtc: ep93xx: add DT support for Cirrus EP93xx
  dt-bindings: rtc: Add Cirrus EP93xx
  dt-bindings: rtc: pcf2123: convert to YAML
  rtc: efi: fixed typo in efi_procfs()
  rtc: omap: Use device_get_match_data()
  rtc: pcf85363: fix wrong mask/val parameters in regmap_update_bits call
  rtc: rtc7301: Support byte-addressed IO
  rtc: rtc7301: Rewrite bindings in schema
  rtc: sh: Convert to platform remove callback returning void
  rtc: pxa: Convert to platform remove callback returning void
  rtc: mv: Convert to platform remove callback returning void
  rtc: imxdi: Convert to platform remove callback returning void
  rtc: at91rm9200: Convert to platform remove callback returning void
  rtc: pcap: Drop no-op remove function
  ...

Pull mailbox updates from Jassi Brar:

 - imx: add support for TX Doorbell v2

 - mtk: implement runtime PM

 - zynqmp: add destination mailbox compatible

 - qcom:
    - add another clock provider for IPQ
    - add SM8650 compatible

 - misc: use preferred device_get_match_data()

* tag 'mailbox-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
  dt-bindings: mailbox: qcom-ipcc: document the SM8650 Inter-Processor Communication Controller
  mailbox: mtk-cmdq-mailbox: Implement Runtime PM with autosuspend
  mailbox: Use device_get_match_data()
  dt-bindings: zynqmp: add destination mailbox compatible
  dt-bindings: mailbox: qcom: add one more clock provider for IPQ mailbox
  mailbox: imx: support channel type tx doorbell v2
  dt-bindings: mailbox: fsl,mu: add new tx doorbell channel

amd-drm-next-6.7-2023-11-03:

amdgpu:
- Fix RAS support check
- RAS fixes
- MES fixes
- SMU13 fixes
- Contiguous memory allocation fix
- BACO fixes
- GPU reset fixes
- Min power limit fixes
- GFX11 fixes
- USB4/TB hotplug fixes
- ARM regression fix
- GFX9.4.3 fixes
- KASAN/KCSAN stack size check fixes
- SR-IOV fixes
- SMU14 fixes
- PSP13 fixes
- Display blend fixes
- Flexible array size fixes

amdkfd:
- GPUVM fix

radeon:
- Flexible array size fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231103173203.4912-1-alexander.deucher@amd.com

Merge tag 'drm-misc-next-fixes-2023-11-02' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next-fixes for v6.7-rc1:

- dt binding fix for ssd132x
- Initialize ssd130x crtc_state to NULL.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/58f40043-bb8a-4716-bf07-89f6a9f56c4c@linux.intel.com

In gfs2_fill_super(), when mounting a gfs2 filesystem is interrupted,
kthread_create() can return -EINTR.  When that happens, we roll back
what has already been done and abort the mount.

Since commit 62dd0f98 ("gfs2: Flag a withdraw if init_threads()
fails), we are calling gfs2_withdraw_delayed() in gfs2_fill_super();
first via gfs2_make_fs_rw(), then directly.  But gfs2_withdraw_delayed()
only marks the filesystem as withdrawing and relies on a caller further
up the stack to do the actual withdraw, which doesn't exist in the
gfs2_fill_super() case.  Because the filesystem is marked as withdrawing
/ withdrawn, function gfs2_lm_unmount() doesn't release the dlm
lockspace, so when we try to mount that filesystem again, we get:

    gfs2: fsid=gohan:gohan0: Trying to join cluster "lock_dlm", "gohan:gohan0"
    gfs2: fsid=gohan:gohan0: dlm_new_lockspace error -17

Since commit b77b4a48 ("gfs2: Rework freeze / thaw logic"), the
deadlock this gfs2_withdraw_delayed() call was supposed to work around
cannot occur anymore because freeze_go_callback() won't take the
sb->s_umount semaphore unconditionally anymore, so we can get rid of the
gfs2_withdraw_delayed() in gfs2_fill_super() entirely.
Reported-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: stable@vger.kernel.org # v6.5+

clang static analyzer complains that value stored to 'gh' is never read.
The code of this line is useless after commit 0b93bac2
("gfs2: Remove LM_FLAG_PRIORITY flag"). Remove this code to save space.
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

In gfs2_put_super(), whether withdrawn or not, the quota should
be cleaned up by gfs2_quota_cleanup().

Otherwise, struct gfs2_sbd will be freed before gfs2_qd_dealloc (rcu
callback) has run for all gfs2_quota_data objects, resulting in
use-after-free.

Also, gfs2_destroy_threads() and gfs2_quota_cleanup() is already called
by gfs2_make_fs_ro(), so in gfs2_put_super(), after calling
gfs2_make_fs_ro(), there is no need to call them again.

Reported-by: syzbot+29c47e9e51895928698c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=29c47e9e51895928698cSigned-off-by: Juntong Deng <juntong.deng@outlook.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Commit 0abd1557 added rcu_dereference() for dereferencing ip->i_gl
in gfs2_permission.  This now causes lockdep to complain when
gfs2_permission is called in non-RCU context:

    WARNING: suspicious RCU usage in gfs2_permission

Switch to rcu_dereference_check() and check for the MAY_NOT_BLOCK flag
to shut up lockdep when we know that dereferencing ip->i_gl is safe.

Fixes: 0abd1557 ("gfs2: fix an oops in gfs2_permission")
Reported-by: syzbot+3e5130844b0c0e2b4948@syzkaller.appspotmail.com
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

gfs2 already has optional persistent uuid.

Use that uuid to report f_fsid in statfs(2), same as ext2/ext4/zonefs.

This allows gfs2 to be monitored by fanotify filesystem watch.
for example, with inotify-tools 4.23.8.0, the following command can be
used to watch changes over entire filesystem:

  fsnotifywatch --filesystem /mnt/gfs2
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

For non-static function declarations, external linkage is implied and
the 'extern' keyword isn't needed.  Some static checkers complain about
the overuse of 'extern', so clean up all the function declarations.

In addition, remove 'extern' from the definition of
free_local_statfs_inodes(); it isn't needed there, either.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Function gfs2_lookup_simple() is used for looking up inodes in the
metadata directory tree, so rename it to gfs2_lookup_meta() to closer
match its purpose.  Clean the function up a little on the way.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Change gfs2_internal_read() to use folios.  Convert sizes to size_t.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Change stuffed_readpage() to take a folio instead of a page.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

In gfs2_write_jdata_batch(), to compute the number of blocks, compute
the total size of the folio batch instead of the number of pages it
contains.  Not a functional change.

Note that we don't currently allow mounting filesystems with a block
size bigger than the page size.  We could change that after converting
the page cache to folios.  The page cache would then only contain
block-size or bigger folios, so rounding wouldn't become an issue here.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Get rid of the generation parameter of gfs2_alloc_blocks(): we only ever
set the generation of the current inode while creating it, so do so
directly.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Pull virtio updates from Michael Tsirkin:
 "vhost,virtio,vdpa: features, fixes, cleanups.

  vdpa/mlx5:
   - VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK
   - new maintainer

  vdpa:
   - support for vq descriptor mappings
   - decouple reset of iotlb mapping from device reset

  and fixes, cleanups all over the place"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (34 commits)
  vdpa_sim: implement .reset_map support
  vdpa/mlx5: implement .reset_map driver op
  vhost-vdpa: clean iotlb map during reset for older userspace
  vdpa: introduce .compat_reset operation callback
  vhost-vdpa: introduce IOTLB_PERSIST backend feature bit
  vhost-vdpa: reset vendor specific mapping to initial state in .release
  vdpa: introduce .reset_map operation callback
  virtio_pci: add check for common cfg size
  virtio-blk: fix implicit overflow on virtio_max_dma_size
  virtio_pci: add build offset check for the new common cfg items
  virtio: add definition of VIRTIO_F_NOTIF_CONFIG_DATA feature bit
  vduse: make vduse_class constant
  vhost-scsi: Spelling s/preceeding/preceding/g
  virtio: kdoc for struct virtio_pci_modern_device
  vdpa: Update sysfs ABI documentation
  MAINTAINERS: Add myself as mlx5_vdpa driver
  virtio-balloon: correct the comment of virtballoon_migratepage()
  mlx5_vdpa: offer VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK
  vdpa/mlx5: Update cvq iotlb mapping on ASID change
  vdpa/mlx5: Make iotlb helper functions more generic
  ...

Merge tag 'firewire-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull firewire update from Takashi Sakamoto:
 "A slight change for flexible length of array in core function.

  Kees Cook provides a patch to annotate the array embedded in fw_node
  structure referring to structure member for the length of array. The
  annotation would be defined by future extension of C compilers, and
  used for access bound-check at run-time enabled by UBSAN and
  FORTIFY_SOURCE"

* tag 'firewire-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: Annotate struct fw_node with __counted_by

Pull i2c updates from Wolfram Sang:
 "I2C has largely driver updates for 6.7, i.e. feature additions (like
  adding transfers while in atomic mode), using new helpers (like
  devm_clk_get_enabled), new IDs, documentation fixes and additions...
  you name it.

  The core got a memleak fix and better support for nested muxes"

* tag 'i2c-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (53 commits)
  i2c: s3c2410: make i2c_s3c_irq_nextbyte() void
  i2c: qcom-geni: add ACPI device id for sc8180x
  Documentation: i2c: add fault code for not supporting 10 bit addresses
  i2c: sun6i-p2wi: Prevent potential division by zero
  i2c: mux: demux-pinctrl: Convert to use sysfs_emit_at() API
  i2c: i801: Use new helper acpi_use_parent_companion
  ACPI: Add helper acpi_use_parent_companion
  MAINTAINERS: add YAML file for i2c-demux-pinctrl
  i2c: core: fix lockdep warning for sparsely nested adapter chain
  i2c: axxia: eliminate kernel-doc warnings
  dt-bindings: i2c: i2c-demux-pinctrl: Convert to json-schema
  i2c: stm32f7: Use devm_clk_get_enabled()
  i2c: stm32f4: Use devm_clk_get_enabled()
  i2c: stm32f7: add description of atomic in struct stm32f7_i2c_dev
  i2c: fix memleak in i2c_new_client_device()
  i2c: exynos5: Calculate t_scl_l, t_scl_h according to i2c spec
  i2c: i801: Simplify class-based client device instantiation
  i2c: exynos5: add support for atomic transfers
  i2c: at91-core: Use devm_clk_get_enabled()
  eeprom: at24: add ST M24C64-D Additional Write lockable page support
  ...

Pull UBI and UBIFS updates from Richard Weinberger:

 - UBI Fastmap improvements

 - Minor issues found by static analysis bots in both UBI and UBIFS

 - Fix for wrong dentry length UBIFS in fscrypt mode

* tag 'ubifs-for-linus-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubifs: ubifs_link: Fix wrong name len calculating when UBIFS is encrypted
  ubi: block: Fix use-after-free in ubiblock_cleanup
  ubifs: fix possible dereference after free
  ubi: fastmap: Add control in 'UBI_IOCATT' ioctl to reserve PEBs for filling pools
  ubi: fastmap: Add module parameter to control reserving filling pool PEBs
  ubi: fastmap: Fix lapsed wear leveling for first 64 PEBs
  ubi: fastmap: Get wl PEB even ec beyonds the 'max' if free PEBs are run out
  ubi: fastmap: may_reserve_for_fm: Don't reserve PEB if fm_anchor exists
  ubi: fastmap: Remove unneeded break condition while filling pools
  ubi: fastmap: Wait until there are enough free PEBs before filling pools
  ubi: fastmap: Use free pebs reserved for bad block handling
  ubi: Replace erase_block() with sync_erase()
  ubi: fastmap: Allocate memory with GFP_NOFS in ubi_update_fastmap
  ubi: fastmap: erase_block: Get erase counter from wl_entry rather than flash
  ubi: fastmap: Fix missed ec updating after erasing old fastmap data block
  ubifs: Fix missing error code err
  ubifs: Fix memory leak of bud->log_hash
  ubifs: Fix some kernel-doc comments

We now include the name of the device in the error message - and also
increment the number of checksum errors on that device.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>