- 13 Mar, 2016 2 commits
-
-
Lionel Landwerlin authored
562c5b4d didn't quite fix the issue of dealing with an error pointer. We can't free/unref an error pointer so reset it to NULL. Many thanks to Dan Carpenter for pointing this out again. Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Daniel Stone <daniels@collabora.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: dri-devel@lists.freedesktop.org Fixes: 562c5b4d ("drm: fix blob pointer check") Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1457698646-22231-1-git-send-email-lionel.g.landwerlin@intel.com
-
Ville Syrjälä authored
SADs may span multiple CEA audio data blocks in the EDID. CEA-861-E says: "The order of the Data Blocks is not constrained. It is also possible to have more than one of a specific type of data block if necessary to include all of the descriptors needed to describe the sink’s capabilities." Each audio data block can carry up to 10 SADs, whereas the ELD SAD limit is 15 according to HDA 1.0a spec. So we should support at least two data blocks. And apparently some devices take a more liberal interpretation and stuff only one SAD per data block even when they would fit into one. So let's try to extract all the SADs we can fit into the ELD even when they span multiple data blocks. While at it, toss in a comment to explain the 13 byte monitor name string limit which confused me at first. Cc: Arturo Pérez <artur999555@gmail.com> Tested-by:
Arturo Pérez <artur999555@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94197Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
- 10 Mar, 2016 1 commit
-
-
Lionel Landwerlin authored
Check properly that the allocated blob's pointer is valid. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Daniel Stone <daniels@collabora.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
Daniel Stone <daniels@collabora.com> Fixes: 5488dc16 ("drm: introduce pipe color correction properties") Signed-off-by:
-
- 08 Mar, 2016 6 commits
-
-
Lionel Landwerlin authored
Patch based on a previous series by Shashank Sharma. This introduces optional properties to enable color correction at the pipe level. It relies on 3 transformations applied to every pixels displayed. First a lookup into a degamma table, then a multiplication of the rgb components by a 3x3 matrix and finally another lookup into a gamma table. The following properties can be added to a pipe : - DEGAMMA_LUT : blob containing degamma LUT - DEGAMMA_LUT_SIZE : number of elements in DEGAMMA_LUT - CTM : transformation matrix applied after the degamma LUT - GAMMA_LUT : blob containing gamma LUT - GAMMA_LUT_SIZE : number of elements in GAMMA_LUT DEGAMMA_LUT_SIZE and GAMMA_LUT_SIZE are read only properties, set by the driver to tell userspace applications what sizes should be the lookup tables in DEGAMMA_LUT and GAMMA_LUT. A helper is also provided so legacy gamma correction is redirected through these new properties. v2: Register LUT size properties as range v3: Fix round in drm_color_lut_get_value() helper More docs on how degamma/gamma properties are used v4: Update contributors v5: Rename CTM_MATRIX property to CTM (Doh!) Add legacy gamma_set atomic helper Describe CTM/LUT acronyms in the kernel doc v6: Fix missing blob unref in drm_atomic_helper_crtc_reset Signed-off-by:Shashank Sharma <shashank.sharma@intel.com> Signed-off-by:
Kumar, Kiran S <kiran.s.kumar@intel.com> Signed-off-by:
Kausal Malladi <kausalmalladi@gmail.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Acked-by:
Rob Bradford <robert.bradford@intel.com> [danvet: CrOS maintainers are also happy with the userspacde side: https://codereview.chromium.org/1182063002/ ] Reviewed-by:
-
Maarten Lankhorst authored
connector_state->crtc can no longer be unset by accident, so that check can be removed. The other code open-codes drm_atomic_get_existing_crtc_state, so use that. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
-
Maarten Lankhorst authored
Now that only encoders can be stolen that are part of the state steal_encoder no longer needs to inspect all connectors, just those that are part of the atomic state. Changes since v1: - Change return value to void, can no longer fail. Signed-off-by:
-
Maarten Lankhorst authored
The current check doesn't handle the case where we don't steal an encoder, but keep it on the current connector. If we repurpose disable_conflicting_encoders to do the checking, we just have to reject the ones that conflict. Changes since v1: - Return early with empty encoder_mask, drm_for_each_connector requires connection_mutex held. Changes since v2: - Add comments for the loops. Signed-off-by:
-
Maarten Lankhorst authored
Instead of failing with -EINVAL when conflicting encoders are found, the legacy set_config will disable other connectors when encoders conflict. With the previous commit this becomes a lot easier to implement. set_config only adds connectors to the state that are modified, and because of the previous commit that calls add_affected_connectors only on set->crtc it means any connector not part of the modeset can be stolen from. We disable the connector in that case, and possibly the crtc if required. Atomic modeset itself still doesn't allow encoder stealing, the results would be too unpredictable. Signed-off-by:
-
Maarten Lankhorst authored
There's no need to have a separate function to get the crtc which is stolen, this can already be found when actually stealing the encoder. drm_for_each_connector already checks for connection_mutex, so use that macro now. Changes since v1: - Do not check for NULL crtc in connector_state, this may happen when a crtc is disabled and its encoder stolen. - Because of this, use connector->state->crtc instead of conn_state->crtc. Signed-off-by:
-
- 04 Mar, 2016 17 commits
-
-
Carlos Palminha authored
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
Carlos Palminha <palminha@synopsys.com> Signed-off-by:
-
Carlos Palminha authored
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Carlos Palminha authored
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Carlos Palminha authored
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Carlos Palminha authored
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Carlos Palminha authored
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Carlos Palminha authored
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Carlos Palminha authored
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Carlos Palminha authored
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Carlos Palminha authored
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Carlos Palminha authored
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Carlos Palminha authored
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Carlos Palminha authored
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Carlos Palminha authored
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Carlos Palminha authored
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Maarten Lankhorst authored
Minor cleanup, connector and connector_state are always non-NULL here. Signed-off-by:
-
Maarten Lankhorst authored
With the addition of crtc_state->connector_mask other connectors from different crtc's aren't needed any more to determine if a crtc has connectors, so only call add_affected_connectors on the target crtc. This allows a cleanup to first remove all current connectors, then add all set->connectors to the target crtc. Signed-off-by:
-
- 29 Feb, 2016 1 commit
-
-
Liu Ying authored
The function __drm_framebuffer_unregister() has boilerplate code to drop idr reference. Let's replace it with drm_mode_object_put() to simplify the code. Signed-off-by:
Liu Ying <gnuiyl@gmail.com> Signed-off-by:
-
- 26 Feb, 2016 11 commits
-
-
http://git.agner.ch/git/linux-drm-fsl-dcuDave Airlie authored
As previously discussed, this is my first pull request for the DCU DRM driver along with the change in MAINTAINERS. https://lkml.org/lkml/2016/1/7/26 The pull contains some code cleanup changes (e.g. removing all error handling for the regmap calls) and several fixes. * 'for-next' of http://git.agner.ch/git/linux-drm-fsl-dcu: drm/fsl-dcu: fix register initialization drm/fsl-dcu: use mode flags for hsync/vsync polarity drm/fsl-dcu: fix alpha blending drm/fsl-dcu: mask all interrupts on initialization drm/fsl-dcu: handle initialization errors properly drm/fsl-dcu: avoid memory leak on errors drm/fsl-dcu: remove regmap return value checks drm/fsl-dcu: specify volatile registers drm: fsl-dcu: Fix no fb check bug MAINTAINERS: update for Freescale DCU DRM driver
-
Stefan Agner authored
The layer enumeration start with 0 (0-15 for LS1021a and 0-63 for Vybrid) whereas the register enumeration start from 1 (1-10 for LS1021a and 1-9 for Vybrid). The loop started off from 0 for both iterations and initialized the number of layers inclusive, which is one layer too many. All extensively written registers seem to be unassigned, it seems that the write to those registers did not do any harm in practice. Signed-off-by:Stefan Agner <stefan@agner.ch>
-
Stefan Agner authored
The current default configuration is as follows: - Invert VSYNC signal (active LOW) - Invert HSYNC signal (active LOW) The mode flags allow to specify the required polarity per mode. Furthermore, none of the current driver settings is actually a standard polarity. This patch applies the current driver default polarities as explicit flags to the display which has been introduced with the driver (NEC WQVGA "nec,nl4827hc19-05b"). The driver now also parses the flags field and applies the configuration accordingly, by using the following values as standard polarities: (e.g. when no flags are specified): - VSYNC signal not inverted (active HIGH) - HSYNC signal not inverted (active HIGH) Acked-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Stefan Agner authored
Fix alpha blending by enabling alpha blending for the whole frame if a color mode with alpha channel is selected (DRM_FORMAT_ARGB*). Also support color modes without alpha channel (DRM_FORMAT_XRGB*) by just not enabling alpha blending on layer level. Signed-off-by: -
Stefan Agner authored
The state of the interrupt mask register on initialization is unknown, e.g. U-Boot could already used the DCU. So depending on the boot loader, the outcome of the interrupt mask register could be different. A defined state is much more preferable. Also, there is no value in keeping interrupts enabled which we don't need. Therefor, mask all interrupts on initialization. Signed-off-by: -
Stefan Agner authored
If initialization fails (e.g. due to missing panel node or deferred probe) make sure to roll-back all operations and return the error code. Signed-off-by: -
Stefan Agner authored
Improve error handling during CRTC initialization. Especially avoid memory leaks in the primary plane initialization error path. Signed-off-by: -
Stefan Agner authored
It is not common to do regmap return value checks, especially not for memory mapped device. We can rule out most error returns since the conditions are static and we know they are ok (e.g. offset aligned to register stride). Also without proper error handling they are not really valuable for the user. Hence remove most of them. The check in the interrupt handler is worth keeping since a volatile register won't be readable in case register caching is still enabled. Signed-off-by: -
Stefan Agner authored
Since we are using cached registers, we need to specify volatile registers explicitly to avoid reading their value from the cache. This allows to read the correct interrupt status in fsl_dcu_drm_irq and clear the asserted bits only. Signed-off-by: -
Meng Yi authored
For state->fb or state->crtc may be NULL in fsl_dcu_drm_plane_atomic_check function, if so, return 0. Signed-off-by:
Meng Yi <meng.yi@nxp.com> Signed-off-by:
Jianwei Wang <jianwei.wang.chn@gmail.com> Signed-off-by:
-
Stefan Agner authored
Promote myself as new maintainer of the Freescale DCU DRM driver. Acked-by:
-
- 25 Feb, 2016 1 commit
-
-
git://linuxtv.org/pinchartl/fbdevDave Airlie authored
rcar-du updates. * 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev: (281 commits) drm: rcar-du: Add tri-planar memory formats support drm: rcar-du: Add probe deferral debug messages drm: rcar-du: lvds: Add R-Car Gen3 support drm: rcar-du: lvds: Rename PLLEN bit to PLLON drm: rcar-du: lvds: Fix PLL frequency-related configuration drm: rcar-du: lvds: Avoid duplication of clock clamp code drm: rcar-du: Add R8A7795 device support drm: rcar-du: Output the DISP signal on the ODDF pin drm: rcar-du: Output the DISP signal on the DISP pin drm: rcar-du: Support up to 4 CRTCs drm: rcar-du: Drop LVDS double dependency on OF drm: rcar-du: Enable compilation on ARM64 drm: rcar-du: Fix compile warning on 64-bit platforms drm: rcar-du: Expose the VSP1 compositor through KMS planes drm: rcar-du: Move plane allocator to rcar_du_plane.c drm: rcar-du: Restart the DU group when a plane source changes drm: rcar-du: Add VSP1 compositor support drm: rcar-du: Add VSP1 support to the planes allocator drm: rcar-du: Refactor plane setup drm: rcar-du: Compute plane DDCR4 register value directly ...
-
- 23 Feb, 2016 1 commit
-
-
Laurent Pinchart authored
Those formats are supported on Gen3 only. Signed-off-by:Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
-
