- 23 Mar, 2019 40 commits
-
-
Stuart Menefy authored
commit a5719a40 upstream. When a timer tick occurs and the clock is in one-shot mode, the timer needs to be stopped to prevent it triggering subsequent interrupts. Currently this code is in exynos4_mct_tick_clear(), but as it is only needed when an ISR occurs move it into exynos4_mct_tick_isr(), leaving exynos4_mct_tick_clear() just doing what its name suggests it should. Signed-off-by:
Stuart Menefy <stuart.menefy@mathembedded.com> Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Tested-by:
Marek Szyprowski <m.szyprowski@samsung.com> Cc: stable@vger.kernel.org # v4.3+ Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stuart Menefy authored
commit 28c4f730 upstream. The step values for some of the LDOs appears to be incorrect, resulting in incorrect voltages (or at least, ones which are different from the Samsung 3.4 vendor kernel). Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Mark Zhang authored
commit 0ab66b3c upstream. If regulator DT node doesn't exist, its of_parse_cb callback function isn't called. Then all values for DT properties are filled with zero. This leads to wrong register update for FPS and POK settings. Signed-off-by:
Jinyoung Park <jinyoungp@nvidia.com> Signed-off-by:
Mark Zhang <markz@nvidia.com> Signed-off-by:
-
Krzysztof Kozlowski authored
commit 56b5d4ea upstream. LDO35 uses 25 mV step, not 50 mV. Bucks 7 and 8 use 12.5 mV step instead of 6.25 mV. Wrong step caused over-voltage (LDO35) or under-voltage (buck7 and 8) if regulators were used (e.g. on Exynos5420 Arndale Octa board). Cc: <stable@vger.kernel.org> Fixes: cb74685e ("regulator: s2mps11: Add samsung s2mps11 regulator driver") Signed-off-by:
-
Andy Shevchenko authored
commit ef070b4e upstream. When the commit b6ced294 ("spi: pxa2xx: Switch to SPI core DMA mapping functionality") switches to SPI core provided DMA helpers, it missed to setup maximum supported DMA transfer length for the controller and thus users mistakenly try to send more data than supported with the following warning: ili9341 spi-PRP0001:01: DMA disabled for transfer length 153600 greater than 65536 Setup maximum supported DMA transfer length in order to make users know the limit. Fixes: b6ced294 ("spi: pxa2xx: Switch to SPI core DMA mapping functionality") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Vignesh R authored
commit 673c865e upstream. Commit 4dea6c9b ("spi: spi-ti-qspi: add mmap mode read support") has has got order of parameter wrong when calling regmap_update_bits() to select CS for mmap access. Mask and value arguments are interchanged. Code will work on a system with single slave, but fails when more than one CS is in use. Fix this by correcting the order of parameters when calling regmap_update_bits(). Fixes: 4dea6c9b ("spi: spi-ti-qspi: add mmap mode read support") Cc: stable@vger.kernel.org Signed-off-by:
Vignesh R <vigneshr@ti.com> Signed-off-by:
-
Anders Roxell authored
commit 206b8cc5 upstream. When CONFIG_PROC_FS isn't set the variable cn isn't used. net/ipv4/netfilter/ipt_CLUSTERIP.c: In function ‘clusterip_net_exit’: net/ipv4/netfilter/ipt_CLUSTERIP.c:849:24: warning: unused variable ‘cn’ [-Wunused-variable] struct clusterip_net *cn = clusterip_pernet(net); ^~ Rework so the variable 'cn' is declared inside "#ifdef CONFIG_PROC_FS". Fixes: b12f7bad ("netfilter: ipt_CLUSTERIP: remove wrong WARN_ON_ONCE in netns exit routine") Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Jiong Wu authored
commit d4721339 upstream. The original purpose of the code I fix is to replace max_discard with max_trim if max_trim is less than max_discard. When max_discard is 0 we should replace max_discard with max_trim as well, because max_discard equals 0 happens only when the max_do_calc_max_discard process is overflowed, so if mmc_can_trim(card) is true, max_discard should be replaced by an available max_trim. However, in the original code, there are two lines of code interfere the right process. 1) if (max_discard && mmc_can_trim(card)) when max_discard is 0, it skips the process checking if max_discard needs to be replaced with max_trim. 2) if (max_trim < max_discard) the condition is false when max_discard is 0. it also skips the process that replaces max_discard with max_trim, in fact, we should replace the 0-valued max_discard with max_trim. Signed-off-by:
Jiong Wu <Lohengrin1024@gmail.com> Fixes: b305882f (mmc: core: optimize mmc_calc_max_discard) Cc: stable@vger.kernel.org # v4.17+ Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
BOUGH CHEN authored
commit de0a0dec upstream. Now tuning reset will be done when the timing is MMC_TIMING_LEGACY/ MMC_TIMING_MMC_HS/MMC_TIMING_SD_HS. But for timing MMC_TIMING_MMC_HS, we can not do tuning reset, otherwise HS400 timing is not right. Here is the process of init HS400, first finish tuning in HS200 mode, then switch to HS mode and 8 bit DDR mode, finally switch to HS400 mode. If we do tuning reset in HS mode, this will cause HS400 mode lost the tuning setting, which will cause CRC error. Signed-off-by:
Haibo Chen <haibo.chen@nxp.com> Cc: stable@vger.kernel.org # v4.12+ Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Fixes: d9370424 ("mmc: sdhci-esdhc-imx: reset tuning circuit when power on mmc card") Signed-off-by:
-
Andy Shevchenko authored
commit f16eb8a4 upstream. If SSDT overlay is loaded via ConfigFS and then unloaded the device, we would like to have OF modalias for, already gone. Thus, acpi_get_name() returns no allocated buffer for such case and kernel crashes afterwards: ACPI: Host-directed Dynamic ACPI Table Unload ads7950 spi-PRP0001:00: Dropping the link to regulator.0 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 #PF error: [normal kernel read fault] PGD 80000000070d6067 P4D 80000000070d6067 PUD 70d0067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 40 Comm: kworker/u4:2 Not tainted 5.0.0+ #96 Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48 Workqueue: kacpi_hotplug acpi_device_del_work_fn RIP: 0010:create_of_modalias.isra.1+0x4c/0x150 Code: 00 00 48 89 44 24 18 31 c0 48 8d 54 24 08 48 c7 44 24 10 00 00 00 00 48 c7 44 24 08 ff ff ff ff e8 7a b0 03 00 48 8b 4c 24 10 <0f> b6 01 84 c0 74 27 48 c7 c7 00 09 f4 a5 0f b6 f0 8d 50 20 f6 04 RSP: 0000:ffffa51040297c10 EFLAGS: 00010246 RAX: 0000000000001001 RBX: 0000000000000785 RCX: 0000000000000000 RDX: 0000000000001001 RSI: 0000000000000286 RDI: ffffa2163dc042e0 RBP: ffffa216062b1196 R08: 0000000000001001 R09: ffffa21639873000 R10: ffffffffa606761d R11: 0000000000000001 R12: ffffa21639873218 R13: ffffa2163deb5060 R14: ffffa216063d1010 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffa2163e000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000007114000 CR4: 00000000001006f0 Call Trace: __acpi_device_uevent_modalias+0xb0/0x100 spi_uevent+0xd/0x40 ... In order to fix above let create_of_modalias() check the status returned by acpi_get_name() and bail out in case of failure. Fixes: 8765c5ba ("ACPI / scan: Rework modalias creation when "compatible" is present") Link: https://bugzilla.kernel.org/show_bug.cgi?id=201381Reported-by:
Ferry Toth <fntoth@gmail.com> Tested-by: Ferry Toth<fntoth@gmail.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Cc: 4.1+ <stable@vger.kernel.org> # 4.1+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Juergen Gross authored
commit 01bd2ac2 upstream. Commit f7c90c2a ("x86/xen: don't write ptes directly in 32-bit PV guests") introduced a regression for booting dom0 on huge systems with lots of RAM (in the TB range). Reason is that on those hosts the p2m list needs to be moved early in the boot process and this requires temporary page tables to be created. Said commit modified xen_set_pte_init() to use a hypercall for writing a PTE, but this requires the page table being in the direct mapped area, which is not the case for the temporary page tables used in xen_relocate_p2m(). As the page tables are completely written before being linked to the actual address space instead of set_pte() a plain write to memory can be used in xen_relocate_p2m(). Fixes: f7c90c2a ("x86/xen: don't write ptes directly in 32-bit PV guests") Cc: stable@vger.kernel.org Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Jan Beulich <jbeulich@suse.com> Signed-off-by:
-
Jann Horn authored
commit 83540fbc upstream. The first version of this method was missing the check for `ret == PATH_MAX`; then such a check was added, but it didn't call kfree() on error, so there was still a small memory leak in the error case. Fix it by using strndup_user() instead of open-coding it. Link: http://lkml.kernel.org/r/20190220165443.152385-1-jannh@google.com Cc: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Fixes: 0eadcc7a ("perf/core: Fix perf_uprobe_init()") Reviewed-by:
Masami Hiramatsu <mhiramat@kernel.org> Acked-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
zhangyi (F) authored
commit e7f0c424 upstream. Commit d716ff71 ("tracing: Remove taking of trace_types_lock in pipe files") use the current tracer instead of the copy in tracing_open_pipe(), but it forget to remove the freeing sentence in the error path. There's an error path that can call kfree(iter->trace) after the iter->trace was assigned to tr->current_trace, which would be bad to free. Link: http://lkml.kernel.org/r/1550060946-45984-1-git-send-email-yi.zhang@huawei.com Cc: stable@vger.kernel.org Fixes: d716ff71 ("tracing: Remove taking of trace_types_lock in pipe files") Signed-off-by:
zhangyi (F) <yi.zhang@huawei.com> Signed-off-by:
-
Tom Zanussi authored
commit 9f0bbf31 upstream. Because there may be random garbage beyond a string's null terminator, it's not correct to copy the the complete character array for use as a hist trigger key. This results in multiple histogram entries for the 'same' string key. So, in the case of a string key, use strncpy instead of memcpy to avoid copying in the extra bytes. Before, using the gdbus entries in the following hist trigger as an example: # echo 'hist:key=comm' > /sys/kernel/debug/tracing/events/sched/sched_waking/trigger # cat /sys/kernel/debug/tracing/events/sched/sched_waking/hist ... { comm: ImgDecoder #4 } hitcount: 203 { comm: gmain } hitcount: 213 { comm: gmain } hitcount: 216 { comm: StreamTrans #73 } hitcount: 221 { comm: mozStorage #3 } hitcount: 230 { comm: gdbus } hitcount: 233 { comm: StyleThread#5 } hitcount: 253 { comm: gdbus } hitcount: 256 { comm: gdbus } hitcount: 260 { comm: StyleThread#4 } hitcount: 271 ... # cat /sys/kernel/debug/tracing/events/sched/sched_waking/hist | egrep gdbus | wc -l 51 After: # cat /sys/kernel/debug/tracing/events/sched/sched_waking/hist | egrep gdbus | wc -l 1 Link: http://lkml.kernel.org/r/50c35ae1267d64eee975b8125e151e600071d4dc.1549309756.git.tom.zanussi@linux.intel.com Cc: Namhyung Kim <namhyung@kernel.org> Cc: stable@vger.kernel.org Fixes: 79e577cb ("tracing: Support string type key properly") Signed-off-by:
Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by:
-
Pavel Shilovsky authored
commit 6dfbd846 upstream. When we have a READ lease for a file and have just issued a write operation to the server we need to purge the cache and set oplock/lease level to NONE to avoid reading stale data. Currently we do that only if a write operation succedeed thus not covering cases when a request was sent to the server but a negative error code was returned later for some other reasons (e.g. -EIOCBQUEUED or -EINTR). Fix this by turning off caching regardless of the error code being returned. The patches fixes generic tests 075 and 112 from the xfs-tests. Cc: <stable@vger.kernel.org> Signed-off-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Reviewed-by:
Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by:
-
Pavel Shilovsky authored
commit c781af7e upstream. When we hit failures during constructing MIDs or sending PDUs through the network, we end up not using message IDs assigned to the packet. The next SMB packet will skip those message IDs and continue with the next one. This behavior may lead to a server not granting us credits until we use the skipped IDs. Fix this by reverting the current ID to the original value if any errors occur before we push the packet through the network stack. This patch fixes the generic/310 test from the xfs-tests. Cc: <stable@vger.kernel.org> # 4.19.x Signed-off-by:
-
Pavel Shilovsky authored
commit 7b9b9edb upstream. Currently on lease break the client sets a caching level twice: when oplock is detected and when oplock is processed. While the 1st attempt sets the level to the value provided by the server, the 2nd one resets the level to None unconditionally. This happens because the oplock/lease processing code was changed to avoid races between page cache flushes and oplock breaks. The commit c11f1df5 ("cifs: Wait for writebacks to complete before attempting write.") fixed the races for oplocks but didn't apply the same changes for leases resulting in overwriting the server granted value to None. Fix this by properly processing lease breaks. Signed-off-by:
-
Ard Biesheuvel authored
commit 969e2f59 upstream. Commit 5092fcf3 ("crypto: arm64/aes-ce-ccm: add non-SIMD generic fallback") introduced C fallback code to replace the NEON routines when invoked from a context where the NEON is not available (i.e., from the context of a softirq taken while the NEON is already being used in kernel process context) Fix two logical flaws in the MAC calculation of the associated data. Reported-by:
Eric Biggers <ebiggers@kernel.org> Fixes: 5092fcf3 ("crypto: arm64/aes-ce-ccm: add non-SIMD generic fallback") Cc: stable@vger.kernel.org Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Ard Biesheuvel authored
commit eaf46edf upstream. The NEON MAC calculation routine fails to handle the case correctly where there is some data in the buffer, and the input fills it up exactly. In this case, we enter the loop at the end with w8 == 0, while a negative value is assumed, and so the loop carries on until the increment of the 32-bit counter wraps around, which is quite obviously wrong. So omit the loop altogether in this case, and exit right away. Reported-by:
-
Eric Biggers authored
commit 2060e284 upstream. The x86 MORUS implementations all fail the improved AEAD tests because they produce the wrong result with some data layouts. The issue is that they assume that if the skcipher_walk API gives 'nbytes' not aligned to the walksize (a.k.a. walk.stride), then it is the end of the data. In fact, this can happen before the end. Also, when the CRYPTO_TFM_REQ_MAY_SLEEP flag is given, they can incorrectly sleep in the skcipher_walk_*() functions while preemption has been disabled by kernel_fpu_begin(). Fix these bugs. Fixes: 56e8e57f ("crypto: morus - Add common SIMD glue code for MORUS") Cc: <stable@vger.kernel.org> # v4.18+ Cc: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by:
Eric Biggers <ebiggers@google.com> Reviewed-by:
Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by:
-
Eric Biggers authored
commit 3af34963 upstream. gcmaes_crypt_by_sg() dereferences the NULL pointer returned by scatterwalk_ffwd() when encrypting an empty plaintext and the source scatterlist ends immediately after the associated data. Fix it by only fast-forwarding to the src/dst data scatterlists if the data length is nonzero. This bug is reproduced by the "rfc4543(gcm(aes))" test vectors when run with the new AEAD test manager. Fixes: e8455207 ("crypto: aesni - Update aesni-intel_glue to use scatter/gather") Cc: <stable@vger.kernel.org> # v4.17+ Cc: Dave Watson <davejwatson@fb.com> Signed-off-by:
-
Eric Biggers authored
commit ba6771c0 upstream. The x86 AEGIS implementations all fail the improved AEAD tests because they produce the wrong result with some data layouts. The issue is that they assume that if the skcipher_walk API gives 'nbytes' not aligned to the walksize (a.k.a. walk.stride), then it is the end of the data. In fact, this can happen before the end. Also, when the CRYPTO_TFM_REQ_MAY_SLEEP flag is given, they can incorrectly sleep in the skcipher_walk_*() functions while preemption has been disabled by kernel_fpu_begin(). Fix these bugs. Fixes: 1d373d4e ("crypto: x86 - Add optimized AEGIS implementations") Cc: <stable@vger.kernel.org> # v4.18+ Cc: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by:
-
Eric Biggers authored
commit eb5e6730 upstream. Instantiating "cryptd(crc32c)" causes a crypto self-test failure because the crypto_alloc_shash() in alg_test_crc32c() fails. This is because cryptd(crc32c) is an ahash algorithm, not a shash algorithm; so it can only be accessed through the ahash API, unlike shash algorithms which can be accessed through both the ahash and shash APIs. As the test is testing the shash descriptor format which is only applicable to shash algorithms, skip it for ahash algorithms. (Note that it's still important to fix crypto self-test failures even for weird algorithm instantiations like cryptd(crc32c) that no one would really use; in fips_enabled mode unprivileged users can use them to panic the kernel, and also they prevent treating a crypto self-test failure as a bug when fuzzing the kernel.) Fixes: 8e3ee85e ("crypto: crc32c - Test descriptor context format") Cc: stable@vger.kernel.org Signed-off-by:
-
Eric Biggers authored
commit b1f6b4bf upstream. Some algorithms have a ->setkey() method that is not atomic, in the sense that setting a key can fail after changes were already made to the tfm context. In this case, if a key was already set the tfm can end up in a state that corresponds to neither the old key nor the new key. For example, in lrw.c, if gf128mul_init_64k_bbe() fails due to lack of memory, then priv::table will be left NULL. After that, encryption with that tfm will cause a NULL pointer dereference. It's not feasible to make all ->setkey() methods atomic, especially ones that have to key multiple sub-tfms. Therefore, make the crypto API set CRYPTO_TFM_NEED_KEY if ->setkey() fails and the algorithm requires a key, to prevent the tfm from being used until a new key is set. [Cc stable mainly because when introducing the NEED_KEY flag I changed AF_ALG to rely on it; and unlike in-kernel crypto API users, AF_ALG previously didn't have this problem. So these "incompletely keyed" states became theoretically accessible via AF_ALG -- though, the opportunities for causing real mischief seem pretty limited.] Fixes: f8d33fac ("crypto: skcipher - prevent using skciphers without setting key") Cc: <stable@vger.kernel.org> # v4.16+ Signed-off-by:
-
Eric Biggers authored
commit 251b7aea upstream. The memcpy()s in the PCBC implementation use walk->iv as both the source and destination, which has undefined behavior. These memcpy()'s are actually unneeded, because walk->iv is already used to hold the previous plaintext block XOR'd with the previous ciphertext block. Thus, walk->iv is already updated to its final value. So remove the broken and unnecessary memcpy()s. Fixes: 91652be5 ("[CRYPTO] pcbc: Add Propagated CBC template") Cc: <stable@vger.kernel.org> # v2.6.21+ Cc: David Howells <dhowells@redhat.com> Signed-off-by:
-
Eric Biggers authored
commit d644f1c8 upstream. The generic MORUS implementations all fail the improved AEAD tests because they produce the wrong result with some data layouts. The issue is that they assume that if the skcipher_walk API gives 'nbytes' not aligned to the walksize (a.k.a. walk.stride), then it is the end of the data. In fact, this can happen before the end. Fix them. Fixes: 396be41f ("crypto: morus - Add generic MORUS AEAD implementations") Cc: <stable@vger.kernel.org> # v4.18+ Cc: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by:
-
Eric Biggers authored
commit ba7d7433 upstream. Some algorithms have a ->setkey() method that is not atomic, in the sense that setting a key can fail after changes were already made to the tfm context. In this case, if a key was already set the tfm can end up in a state that corresponds to neither the old key nor the new key. It's not feasible to make all ->setkey() methods atomic, especially ones that have to key multiple sub-tfms. Therefore, make the crypto API set CRYPTO_TFM_NEED_KEY if ->setkey() fails and the algorithm requires a key, to prevent the tfm from being used until a new key is set. Note: we can't set CRYPTO_TFM_NEED_KEY for OPTIONAL_KEY algorithms, so ->setkey() for those must nevertheless be atomic. That's fine for now since only the crc32 and crc32c algorithms set OPTIONAL_KEY, and it's not intended that OPTIONAL_KEY be used much. [Cc stable mainly because when introducing the NEED_KEY flag I changed AF_ALG to rely on it; and unlike in-kernel crypto API users, AF_ALG previously didn't have this problem. So these "incompletely keyed" states became theoretically accessible via AF_ALG -- though, the opportunities for causing real mischief seem pretty limited.] Fixes: 9fa68f62 ("crypto: hash - prevent using keyed hashes without setting key") Cc: stable@vger.kernel.org Signed-off-by:
-
Ard Biesheuvel authored
commit d72b9d4a upstream. The SIMD routine ported from x86 used to have a special code path for inputs < 16 bytes, which got lost somewhere along the way. Instead, the current glue code aligns the input pointer to 16 bytes, which is not really necessary on this architecture (although it could be beneficial to performance to expose aligned data to the the NEON routine), but this could result in inputs of less than 16 bytes to be passed in. This not only fails the new extended tests that Eric has implemented, it also results in the code reading past the end of the input, which could potentially result in crashes when dealing with less than 16 bytes of input at the end of a page which is followed by an unmapped page. So update the glue code to only invoke the NEON routine if the input is at least 16 bytes. Reported-by:
-
Eric Biggers authored
commit 12455e32 upstream. The arm64 NEON bit-sliced implementation of AES-CTR fails the improved skcipher tests because it sometimes produces the wrong ciphertext. The bug is that the final keystream block isn't returned from the assembly code when the number of non-final blocks is zero. This can happen if the input data ends a few bytes after a page boundary. In this case the last bytes get "encrypted" by XOR'ing them with uninitialized memory. Fix the assembly code to return the final keystream block when needed. Fixes: 88a3f582 ("crypto: arm64/aes - don't use IV buffer to return final keystream block") Cc: <stable@vger.kernel.org> # v4.11+ Reviewed-by:
-
Ard Biesheuvel authored
commit 62fecf29 upstream. The SIMD routine ported from x86 used to have a special code path for inputs < 16 bytes, which got lost somewhere along the way. Instead, the current glue code aligns the input pointer to permit the NEON routine to use special versions of the vld1 instructions that assume 16 byte alignment, but this could result in inputs of less than 16 bytes to be passed in. This not only fails the new extended tests that Eric has implemented, it also results in the code reading past the end of the input, which could potentially result in crashes when dealing with less than 16 bytes of input at the end of a page which is followed by an unmapped page. So update the glue code to only invoke the NEON routine if the input is at least 16 bytes. Reported-by:
-
Eric Biggers authored
commit 0f533e67 upstream. The generic AEGIS implementations all fail the improved AEAD tests because they produce the wrong result with some data layouts. The issue is that they assume that if the skcipher_walk API gives 'nbytes' not aligned to the walksize (a.k.a. walk.stride), then it is the end of the data. In fact, this can happen before the end. Fix them. Fixes: f606a88e ("crypto: aegis - Add generic AEGIS AEAD implementations") Cc: <stable@vger.kernel.org> # v4.18+ Cc: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by:
-
Eric Biggers authored
commit 6ebc9700 upstream. Some algorithms have a ->setkey() method that is not atomic, in the sense that setting a key can fail after changes were already made to the tfm context. In this case, if a key was already set the tfm can end up in a state that corresponds to neither the old key nor the new key. For example, in gcm.c, if the kzalloc() fails due to lack of memory, then the CTR part of GCM will have the new key but GHASH will not. It's not feasible to make all ->setkey() methods atomic, especially ones that have to key multiple sub-tfms. Therefore, make the crypto API set CRYPTO_TFM_NEED_KEY if ->setkey() fails, to prevent the tfm from being used until a new key is set. [Cc stable mainly because when introducing the NEED_KEY flag I changed AF_ALG to rely on it; and unlike in-kernel crypto API users, AF_ALG previously didn't have this problem. So these "incompletely keyed" states became theoretically accessible via AF_ALG -- though, the opportunities for causing real mischief seem pretty limited.] Fixes: dc26c17f ("crypto: aead - prevent using AEADs without setting key") Cc: <stable@vger.kernel.org> # v4.16+ Signed-off-by:
-
Al Viro authored
commit 399504e2 upstream. same story as with last May fixes in sysfs (7b745a4e "unfuck sysfs_mount()"); new_sb is left uninitialized in case of early errors in kernfs_mount_ns() and papering over it by treating any error from kernfs_mount_ns() as equivalent to !new_ns ends up conflating the cases when objects had never been transferred to a superblock with ones when that has happened and resulting new superblock had been dropped. Easily fixed (same way as in sysfs case). Additionally, there's a superblock leak on kernfs_node_dentry() failure *and* a dentry leak inside kernfs_node_dentry() itself - the latter on probably impossible errors, but the former not impossible to trigger (as the matter of fact, injecting allocation failures at that point *does* trigger it). Cc: stable@kernel.org Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Oliver O'Halloran authored
commit 07464e88 upstream. Libnvdimm reserves the first 8K of pfn and devicedax namespaces to store a superblock describing the namespace. This 8K reservation is contained within the altmap area which the kernel uses for the vmemmap backing for the pages within the namespace. The altmap allows for some pages at the start of the altmap area to be reserved and that mechanism is used to protect the superblock from being re-used as vmemmap backing. The number of PFNs to reserve is calculated using: PHYS_PFN(SZ_8K) Which is implemented as: #define PHYS_PFN(x) ((unsigned long)((x) >> PAGE_SHIFT)) So on systems where PAGE_SIZE is greater than 8K the reservation size is truncated to zero and the superblock area is re-used as vmemmap backing. As a result all the namespace information stored in the superblock (i.e. if it's a PFN or DAX namespace) is lost and the namespace needs to be re-created to get access to the contents. This patch fixes this by using PFN_UP() rather than PHYS_PFN() to ensure that at least one page is reserved. On systems with a 4K pages size this patch should have no effect. Cc: stable@vger.kernel.org Cc: Dan Williams <dan.j.williams@intel.com> Fixes: ac515c08 ("libnvdimm, pmem, pfn: move pfn setup to the core") Signed-off-by:
Oliver O'Halloran <oohall@gmail.com> Reviewed-by:
Vishal Verma <vishal.l.verma@intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Dan Williams authored
commit fa7d2e63 upstream. For recovery, where non-dax access is needed to a given physical address range, and testing, allow the 'force_raw' attribute to override the default establishment of a dev_pagemap. Otherwise without this capability it is possible to end up with a namespace that can not be activated due to corrupted info-block, and one that can not be repaired due to a section collision. Cc: <stable@vger.kernel.org> Fixes: 004f1afb ("libnvdimm, pmem: direct map legacy pmem by default") Signed-off-by:
-
Wei Yang authored
commit f101ada7 upstream. When trying to see whether current nd_region intersects with others, trim_pfn_device() has already calculated the *size* to be expanded to SECTION size. Do not double append 'adjust' to 'size' when calculating whether the end of a region collides with the next pmem region. Fixes: ae86cbfe "libnvdimm, pfn: Pad pfn namespaces relative to other regions" Cc: <stable@vger.kernel.org> Signed-off-by:
Wei Yang <richardw.yang@linux.intel.com> Signed-off-by:
-
Dan Williams authored
commit 966d23a0 upstream. The UEFI 2.7 specification sets expectations that the 'updating' flag is eventually cleared. To date, the libnvdimm core has never adhered to that protocol. The policy of the core matches the policy of other multi-device info-block formats like MD-Software-RAID that expect administrator intervention on inconsistent info-blocks, not automatic invalidation. However, some pre-boot environments may unfortunately attempt to "clean up" the labels and invalidate a set when it fails to find at least one "non-updating" label in the set. Clear the updating flag after set updates to minimize the window of vulnerability to aggressive pre-boot environments. Ideally implementations would not write to the label area outside of creating namespaces. Note that this only minimizes the window, it does not close it as the system can still crash while clearing the flag and the set can be subsequently deleted / invalidated by the pre-boot environment. Fixes: f524bf27 ("libnvdimm: write pmem label set") Cc: <stable@vger.kernel.org> Cc: Kelly Couch <kelly.j.couch@intel.com> Signed-off-by:
-
Dan Williams authored
commit fa3ed4d9 upstream. The no_init_ars option is meant to prevent long-ARS, but short-ARS should be allowed to grab any immediate results. Fixes: bc6ba808 ("nfit, address-range-scrub: rework and simplify ARS...") Cc: <stable@vger.kernel.org> Reported-by:
Erwin Tsaur <erwin.tsaur@oracle.com> Reviewed-by:
Toshi Kani <toshi.kani@hpe.com> Signed-off-by:
-
Dan Williams authored
commit c6c5df29 upstream. If query-ARS reports that ARS has stopped and requires continuation attempt to retrieve short-ARS results before continuing the long operation. Fixes: bc6ba808 ("nfit, address-range-scrub: rework and simplify ARS...") Cc: <stable@vger.kernel.org> Reported-by:
Krzysztof Rusocki <krzysztof.rusocki@intel.com> Reviewed-by:
-
Dan Williams authored
commit ebe9f6f1 upstream. Commit 11189c10 "acpi/nfit: Fix command-supported detection" broke ND_CMD_CALL for bus-level commands. The "func = cmd" assumption is only valid for: ND_CMD_ARS_CAP ND_CMD_ARS_START ND_CMD_ARS_STATUS ND_CMD_CLEAR_ERROR The function number otherwise needs to be pulled from the command payload for: NFIT_CMD_TRANSLATE_SPA NFIT_CMD_ARS_INJECT_SET NFIT_CMD_ARS_INJECT_CLEAR NFIT_CMD_ARS_INJECT_GET Update cmd_to_func() for the bus case and call it in the common path. Fixes: 11189c10 ("acpi/nfit: Fix command-supported detection") Cc: <stable@vger.kernel.org> Reviewed-by:
Grzegorz Burzynski <grzegorz.burzynski@intel.com> Tested-by:
Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
-
