- 11 Aug, 2017 40 commits
-
-
David S. Miller authored
[ Upstream commit 0ede1c40 ] Mikael Pettersson reported that some test programs in the strace-4.18 testsuite cause an OOPS. After some debugging it turns out that garbage values are returned when an exception occurs, causing the fixup memset() to be run with bogus arguments. The problem is that two of the exception handler stubs write the successfully copied length into the wrong register. Fixes: ee841d0a ("sparc64: Convert U3copy_{from,to}_user to accurate exception reporting.") Reported-by:
Mikael Pettersson <mikpelinux@gmail.com> Tested-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nitin Gupta authored
[ Upstream commit 8399e4b8 ] Add hstate for each supported hugepage size using arch initcall. This change fixes some hugepage parameter parsing inconsistencies: case 1: no hugepage parameters Without hugepage parameters, only a hugepages-8192kB entry is visible in sysfs. It's different from x86_64 where both 2M and 1G hugepage sizes are available. case 2: default_hugepagesz=[64K|256M|2G] When specifying only a default_hugepagesz parameter, the default hugepage size isn't really changed and it stays at 8M. This is again different from x86_64. Orabug: 25869946 Reviewed-by:
Bob Picco <bob.picco@oracle.com> Signed-off-by:
Nitin Gupta <nitin.m.gupta@oracle.com> Signed-off-by:
-
Rob Gardner authored
[ Upstream commit fc290a11 ] This fixes another cause of random segfaults and bus errors that may occur while running perf with the callgraph option. Critical sections beginning with spin_lock_irqsave() raise the interrupt level to PIL_NORMAL_MAX (14) and intentionally do not block performance counter interrupts, which arrive at PIL_NMI (15). But some sections of code are "super critical" with respect to perf because the perf_callchain_user() path accesses user space and may cause TLB activity as well as faults as it unwinds the user stack. One particular critical section occurs in switch_mm: spin_lock_irqsave(&mm->context.lock, flags); ... load_secondary_context(mm); tsb_context_switch(mm); ... spin_unlock_irqrestore(&mm->context.lock, flags); If a perf interrupt arrives in between load_secondary_context() and tsb_context_switch(), then perf_callchain_user() could execute with the context ID of one process, but with an active TSB for a different process. When the user stack is accessed, it is very likely to incur a TLB miss, since the h/w context ID has been changed. The TLB will then be reloaded with a translation from the TSB for one process, but using a context ID for another process. This exposes memory from one process to another, and since it is a mapping for stack memory, this usually causes the new process to crash quickly. This super critical section needs more protection than is provided by spin_lock_irqsave() since perf interrupts must not be allowed in. Since __tsb_context_switch already goes through the trouble of disabling interrupts completely, we fix this by moving the secondary context load down into this better protected region. Orabug: 25577560 Signed-off-by:
Dave Aldridge <david.j.aldridge@oracle.com> Signed-off-by:
Rob Gardner <rob.gardner@oracle.com> Signed-off-by:
-
Jane Chu authored
[ Upstream commit 9d53caec ] A large sun4v SPARC system may have moments of intensive xcall activities, usually caused by unmapping many pages on many CPUs concurrently. This can flood receivers with CPU mondo interrupts for an extended period, causing some unlucky senders to hit send-mondo timeout. This problem gets worse as cpu count increases because sometimes mappings must be invalidated on all CPUs, and sometimes all CPUs may gang up on a single CPU. But a busy system is not a broken system. In the above scenario, as long as the receiver is making forward progress processing mondo interrupts, the sender should continue to retry. This patch implements the receiver's forward progress meter by introducing a per cpu counter 'cpu_mondo_counter[cpu]' where 'cpu' is in the range of 0..NR_CPUS. The receiver increments its counter as soon as it receives a mondo and the sender tracks the receiver's counter. If the receiver has stopped making forward progress when the retry limit is reached, the sender declares send-mondo-timeout and panic; otherwise, the receiver is allowed to keep making forward progress. In addition, it's been observed that PCIe hotplug events generate Correctable Errors that are handled by hypervisor and then OS. Hypervisor 'borrows' a guest cpu strand briefly to provide the service. If the cpu strand is simultaneously the only cpu targeted by a mondo, it may not be available for the mondo in 20msec, causing SUN4V mondo timeout. It appears that 1 second is the agreed wait time between hypervisor and guest OS, this patch makes the adjustment. Orabug: 25476541 Orabug: 26417466 Signed-off-by:
Jane Chu <jane.chu@oracle.com> Reviewed-by:
Steve Sistare <steven.sistare@oracle.com> Reviewed-by:
Anthony Yznaga <anthony.yznaga@oracle.com> Reviewed-by:
Thomas Tai <thomas.tai@oracle.com> Signed-off-by:
-
Michael S. Tsirkin authored
[ Upstream commit 1daa8790 ] Seth Forshee noticed a performance degradation with some workloads. This turns out to be due to packet drops. Euan Kemp noticed that this is because we drop all packets where length exceeds the truesize, but for some packets we add in extra memory without updating the truesize. This in turn was kept around unchanged from ab7db917 ("virtio-net: auto-tune mergeable rx buffer size for improved performance"). That commit had an internal reason not to account for the extra space: not enough bits to do it. No longer true so let's account for the allocated length exactly. Many thanks to Seth Forshee for the report and bisecting and Euan Kemp for debugging the issue. Fixes: 680557cf ("virtio_net: rework mergeable buffer handling") Reported-by:
Euan Kemp <euan.kemp@coreos.com> Tested-by:
Seth Forshee <seth.forshee@canonical.com> Tested-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Ido Schimmel authored
[ Upstream commit 71ed7ee3 ] Michał reported a NULL pointer deref during fib_sync_down_dev() when unregistering a netdevice. The problem is that we don't check for 'in_dev' being NULL, which can happen in very specific cases. Usually routes are flushed upon NETDEV_DOWN sent in either the netdev or the inetaddr notification chains. However, if an interface isn't configured with any IP address, then it's possible for host routes to be flushed following NETDEV_UNREGISTER, after NULLing dev->ip_ptr in inetdev_destroy(). To reproduce: $ ip link add type dummy $ ip route add local 1.1.1.0/24 dev dummy0 $ ip link del dev dummy0 Fix this by checking for the presence of 'in_dev' before referencing it. Fixes: 982acb97 ("ipv4: fib: Notify about nexthop status changes") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reported-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Tested-by:
-
Tejun Heo authored
commit 0a94efb5 upstream. 5c0338c6 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered") automatically enabled ordered attribute for unbound workqueues w/ max_active == 1. Because ordered workqueues reject max_active and some attribute changes, this implicit ordered mode broke cases where the user creates an unbound workqueue w/ max_active == 1 and later explicitly changes the related attributes. This patch distinguishes explicit and implicit ordered setting and overrides from attribute changes if implict. Signed-off-by:
Tejun Heo <tj@kernel.org> Fixes: 5c0338c6 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered") Cc: Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 7ad813f2 ] Marc reported that he was not getting the PHY library adjust_link() callback function to run when calling phy_stop() + phy_disconnect() which does not indeed happen because we set the state machine to PHY_HALTED but we don't get to run it to process this state past that point. Fix this with a synchronous call to phy_state_machine() in order to have the state machine actually act on PHY_HALTED, set the PHY device's link down, turn the network device's carrier off and finally call the adjust_link() function. Reported-by:
Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Fixes: a390d1f3 ("phylib: convert state_queue work to delayed_work") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit c9f2c1ae ] When an early demuxed packet reaches __udp6_lib_lookup_skb(), the sk reference is retrieved and used, but the relevant reference count is leaked and the socket destructor is never called. Beyond leaking the sk memory, if there are pending UDP packets in the receive queue, even the related accounted memory is leaked. In the long run, this will cause persistent forward allocation errors and no UDP skbs (both ipv4 and ipv6) will be able to reach the user-space. Fix this by explicitly accessing the early demux reference before the lookup, and properly decreasing the socket reference count after usage. Also drop the skb_steal_sock() in __udp6_lib_lookup_skb(), and the now obsoleted comment about "socket cache". The newly added code is derived from the current ipv4 code for the similar path. v1 -> v2: fixed the __udp6_lib_rcv() return code for resubmission, as suggested by Eric Reported-by:
Sam Edwards <CFSworks@gmail.com> Reported-by:
Marc Haber <mh+netdev@zugschlus.de> Fixes: 5425077d ("net: ipv6: Add early demux handler for UDP unicast") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Paul Blakey authored
[ Upstream commit bcec601f ] When adding ethtool steering rule with action DISCARD we wrongly pass a NULL dest with dest_num 1 to mlx5_add_flow_rules(). What this error seems to have caused is sending VPORT 0 (MLX5_FLOW_DESTINATION_TYPE_VPORT) as the fte dest instead of no dests. We have fte action correctly set to DROP so it might been ignored anyways. To reproduce use: # sudo ethtool --config-nfc <dev> flow-type ether \ dst aa:bb:cc:dd:ee:ff action -1 Fixes: 74491de9 ("net/mlx5: Add multi dest support") Signed-off-by:
Paul Blakey <paulb@mellanox.com> Reviewed-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Eugenia Emantayev authored
[ Upstream commit f08c39ed ] This is done in order to ensure that work will not run after the cleanup. Fixes: ef9814de ('net/mlx5e: Add HW timestamping (TS) support') Signed-off-by:
Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by:
-
Eugenia Emantayev authored
[ Upstream commit d439c845 ] The overflow_period is calculated in seconds. In order to use it for delayed work scheduling translation to jiffies is needed. Fixes: ef9814de ('net/mlx5e: Add HW timestamping (TS) support') Signed-off-by:
-
Eugenia Emantayev authored
[ Upstream commit cf503308 ] Add the missing option to enable the PTP_CLK_PPS function. In this case pin should be configured as 1PPS IN first and then it will be connected to PPS mechanism. Events will be reported as PTP_CLOCK_PPSUSR events to relevant sysfs. Fixes: ee7f1220 ('net/mlx5e: Implement 1PPS support') Signed-off-by:
-
Eugenia Emantayev authored
[ Upstream commit 4272f9b8 ] In order to fix the drift in 1PPS out need to adjust the next pulse. On each 1PPS out falling edge driver gets the event, then the event handler adjusts the next pulse starting time. Fixes: ee7f1220 ('net/mlx5e: Implement 1PPS support') Signed-off-by:
-
Eugenia Emantayev authored
[ Upstream commit 49c5031c ] Need to disable the MTPPS and unsubscribe from the pulse events when user disables the 1PPS functionality. Fixes: ee7f1220 ('net/mlx5e: Implement 1PPS support') Signed-off-by:
-
Eugenia Emantayev authored
[ Upstream commit fa367688 ] In order to mark relevant fields while setting the MTPPS register add field select. Otherwise it can cause a misconfiguration in firmware. Fixes: ee7f1220 ('net/mlx5e: Implement 1PPS support') Signed-off-by:
-
Eugenia Emantayev authored
[ Upstream commit 0b794ffa ] Fix miscalculation in reserved_at_1a0 field. Fixes: ee7f1220 ('net/mlx5e: Implement 1PPS support') Signed-off-by:
-
Ilan Tayari authored
[ Upstream commit 0242f4a0 ] outer_header_zero() routine checks if the outer_headers match of a flow-table entry are all zero. This function uses the size of whole fte_match_param, instead of just the outer_headers member, causing failure to detect all-zeros if any other members of the fte_match_param are non-zero. Use the correct size for zero check. Fixes: 6dc6071c ("net/mlx5e: Add ethtool flow steering support") Signed-off-by:
Ilan Tayari <ilant@mellanox.com> Signed-off-by:
-
Alex Vesker authored
[ Upstream commit 58569ef8 ] On interface remove, the clean-up was done incorrectly causing an error in the log: "SET_FLOW_TABLE_ROOT(0x92f) op_mod(0x0) failed...syndrome (0x7e9f14)" This was caused by the following flow: -ndo_uninit: Move QP state to RST (this disconnects the QP from FT), the QP cannot be attached to any FT unless it is in RTS. -mlx5_rdma_netdev_free: cleanup_rx: Destroy FT cleanup_tx: Destroy QP and remove QPN from FT This caused a problem when destroying current FT we tried to re-attach the QP to the next FT which is not needed. The correct flow is: -mlx5_rdma_netdev_free: cleanup_rx: remove QPN from FT & Destroy FT cleanup_tx: Destroy QP Fixes: 50854114 ("net/mlx5: Use underlay QPN from the root name space") Signed-off-by:
Alex Vesker <valex@mellanox.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 6b84202c ] Commit b1f5bfc2 ("sctp: don't dereference ptr before leaving _sctp_walk_{params, errors}()") tried to fix the issue that it may overstep the chunk end for _sctp_walk_{params, errors} with 'chunk_end > offset(length) + sizeof(length)'. But it introduced a side effect: When processing INIT, it verifies the chunks with 'param.v == chunk_end' after iterating all params by sctp_walk_params(). With the check 'chunk_end > offset(length) + sizeof(length)', it would return when the last param is not yet accessed. Because the last param usually is fwdtsn supported param whose size is 4 and 'chunk_end == offset(length) + sizeof(length)' This is a badly issue even causing sctp couldn't process 4-shakes. Client would always get abort when connecting to server, due to the failure of INIT chunk verification on server. The patch is to use 'chunk_end <= offset(length) + sizeof(length)' instead of 'chunk_end < offset(length) + sizeof(length)' for both _sctp_walk_params and _sctp_walk_errors. Fixes: b1f5bfc2 ("sctp: don't dereference ptr before leaving _sctp_walk_{params, errors}()") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Alexander Potapenko authored
[ Upstream commit b1f5bfc2 ] If the length field of the iterator (|pos.p| or |err|) is past the end of the chunk, we shouldn't access it. This bug has been detected by KMSAN. For the following pair of system calls: socket(PF_INET6, SOCK_STREAM, 0x84 /* IPPROTO_??? */) = 3 sendto(3, "A", 1, MSG_OOB, {sa_family=AF_INET6, sin6_port=htons(0), inet_pton(AF_INET6, "::1", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, 28) = 1 the tool has reported a use of uninitialized memory: ================================================================== BUG: KMSAN: use of uninitialized memory in sctp_rcv+0x17b8/0x43b0 CPU: 1 PID: 2940 Comm: probe Not tainted 4.11.0-rc5+ #2926 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:16 dump_stack+0x172/0x1c0 lib/dump_stack.c:52 kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:927 __msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:469 __sctp_rcv_init_lookup net/sctp/input.c:1074 __sctp_rcv_lookup_harder net/sctp/input.c:1233 __sctp_rcv_lookup net/sctp/input.c:1255 sctp_rcv+0x17b8/0x43b0 net/sctp/input.c:170 sctp6_rcv+0x32/0x70 net/sctp/ipv6.c:984 ip6_input_finish+0x82f/0x1ee0 net/ipv6/ip6_input.c:279 NF_HOOK ./include/linux/netfilter.h:257 ip6_input+0x239/0x290 net/ipv6/ip6_input.c:322 dst_input ./include/net/dst.h:492 ip6_rcv_finish net/ipv6/ip6_input.c:69 NF_HOOK ./include/linux/netfilter.h:257 ipv6_rcv+0x1dbd/0x22e0 net/ipv6/ip6_input.c:203 __netif_receive_skb_core+0x2f6f/0x3a20 net/core/dev.c:4208 __netif_receive_skb net/core/dev.c:4246 process_backlog+0x667/0xba0 net/core/dev.c:4866 napi_poll net/core/dev.c:5268 net_rx_action+0xc95/0x1590 net/core/dev.c:5333 __do_softirq+0x485/0x942 kernel/softirq.c:284 do_softirq_own_stack+0x1c/0x30 arch/x86/entry/entry_64.S:902 </IRQ> do_softirq kernel/softirq.c:328 __local_bh_enable_ip+0x25b/0x290 kernel/softirq.c:181 local_bh_enable+0x37/0x40 ./include/linux/bottom_half.h:31 rcu_read_unlock_bh ./include/linux/rcupdate.h:931 ip6_finish_output2+0x19b2/0x1cf0 net/ipv6/ip6_output.c:124 ip6_finish_output+0x764/0x970 net/ipv6/ip6_output.c:149 NF_HOOK_COND ./include/linux/netfilter.h:246 ip6_output+0x456/0x520 net/ipv6/ip6_output.c:163 dst_output ./include/net/dst.h:486 NF_HOOK ./include/linux/netfilter.h:257 ip6_xmit+0x1841/0x1c00 net/ipv6/ip6_output.c:261 sctp_v6_xmit+0x3b7/0x470 net/sctp/ipv6.c:225 sctp_packet_transmit+0x38cb/0x3a20 net/sctp/output.c:632 sctp_outq_flush+0xeb3/0x46e0 net/sctp/outqueue.c:885 sctp_outq_uncork+0xb2/0xd0 net/sctp/outqueue.c:750 sctp_side_effects net/sctp/sm_sideeffect.c:1773 sctp_do_sm+0x6962/0x6ec0 net/sctp/sm_sideeffect.c:1147 sctp_primitive_ASSOCIATE+0x12c/0x160 net/sctp/primitive.c:88 sctp_sendmsg+0x43e5/0x4f90 net/sctp/socket.c:1954 inet_sendmsg+0x498/0x670 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 sock_sendmsg net/socket.c:643 SYSC_sendto+0x608/0x710 net/socket.c:1696 SyS_sendto+0x8a/0xb0 net/socket.c:1664 do_syscall_64+0xe6/0x130 arch/x86/entry/common.c:285 entry_SYSCALL64_slow_path+0x25/0x25 arch/x86/entry/entry_64.S:246 RIP: 0033:0x401133 RSP: 002b:00007fff6d99cd38 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00000000004002b0 RCX: 0000000000401133 RDX: 0000000000000001 RSI: 0000000000494088 RDI: 0000000000000003 RBP: 00007fff6d99cd90 R08: 00007fff6d99cd50 R09: 000000000000001c R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000000 R13: 00000000004063d0 R14: 0000000000406460 R15: 0000000000000000 origin: save_stack_trace+0x37/0x40 arch/x86/kernel/stacktrace.c:59 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:302 kmsan_internal_poison_shadow+0xb1/0x1a0 mm/kmsan/kmsan.c:198 kmsan_poison_shadow+0x6d/0xc0 mm/kmsan/kmsan.c:211 slab_alloc_node mm/slub.c:2743 __kmalloc_node_track_caller+0x200/0x360 mm/slub.c:4351 __kmalloc_reserve net/core/skbuff.c:138 __alloc_skb+0x26b/0x840 net/core/skbuff.c:231 alloc_skb ./include/linux/skbuff.h:933 sctp_packet_transmit+0x31e/0x3a20 net/sctp/output.c:570 sctp_outq_flush+0xeb3/0x46e0 net/sctp/outqueue.c:885 sctp_outq_uncork+0xb2/0xd0 net/sctp/outqueue.c:750 sctp_side_effects net/sctp/sm_sideeffect.c:1773 sctp_do_sm+0x6962/0x6ec0 net/sctp/sm_sideeffect.c:1147 sctp_primitive_ASSOCIATE+0x12c/0x160 net/sctp/primitive.c:88 sctp_sendmsg+0x43e5/0x4f90 net/sctp/socket.c:1954 inet_sendmsg+0x498/0x670 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 sock_sendmsg net/socket.c:643 SYSC_sendto+0x608/0x710 net/socket.c:1696 SyS_sendto+0x8a/0xb0 net/socket.c:1664 do_syscall_64+0xe6/0x130 arch/x86/entry/common.c:285 return_from_SYSCALL_64+0x0/0x6a arch/x86/entry/entry_64.S:246 ================================================================== Signed-off-by:
Alexander Potapenko <glider@google.com> Signed-off-by:
-
Moshe Shemesh authored
[ Upstream commit 219c81f7 ] When driver fail to allocate an entry to send command to FW, it must notify the calling function and release the memory allocated for this command. Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by:
Moshe Shemesh <moshe@mellanox.com> Cc: kernel-team@fb.com Signed-off-by:
-
Moshe Shemesh authored
[ Upstream commit 06187080 ] Completion on timeout should not free the driver command entry structure as it will need to access it again once real completion event from FW will occur. Fixes: 73dd3a48 ('net/mlx5: Avoid using pending command interface slots') Signed-off-by:
-
Aviv Heller authored
[ Upstream commit dc798b4c ] The tx_enabled lag event field is used to determine whether a slave is active. Current logic uses this value only if the mode is active-backup. However, LACP mode, although considered a load balancing mode, can mark a slave as inactive in certain situations (e.g., LACP timeout). This fix takes the tx_enabled value into account when remapping, with no respect to the LAG mode (this should not affect the behavior in XOR mode, since in this mode both slaves are marked as active). Fixes: 7907f23a (net/mlx5: Implement RoCE LAG feature) Signed-off-by:
Aviv Heller <avivh@mellanox.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit e90ce2fc ] In dccp_feat_init, when ccid_get_builtin_ccids failsto alloc memory for rx.val, it should free tx.val before returning an error. Signed-off-by:
-
Xin Long authored
[ Upstream commit b7953d3c ] The patch "dccp: fix a memleak that dccp_ipv6 doesn't put reqsk properly" fixed reqsk refcnt leak for dccp_ipv6. The same issue exists on dccp_ipv4. This patch is to fix it for dccp_ipv4. Signed-off-by:
-
Xin Long authored
[ Upstream commit 0c2232b0 ] In dccp_v6_conn_request, after reqsk gets alloced and hashed into ehash table, reqsk's refcnt is set 3. one is for req->rsk_timer, one is for hlist, and the other one is for current using. The problem is when dccp_v6_conn_request returns and finishes using reqsk, it doesn't put reqsk. This will cause reqsk refcnt leaks and reqsk obj never gets freed. Jianlin found this issue when running dccp_memleak.c in a loop, the system memory would run out. dccp_memleak.c: int s1 = socket(PF_INET6, 6, IPPROTO_IP); bind(s1, &sa1, 0x20); listen(s1, 0x9); int s2 = socket(PF_INET6, 6, IPPROTO_IP); connect(s2, &sa1, 0x20); close(s1); close(s2); This patch is to put the reqsk before dccp_v6_conn_request returns, just as what tcp_conn_request does. Reported-by:
Jianlin Shi <jishi@redhat.com> Signed-off-by:
-
WANG Cong authored
[ Upstream commit d94708a5 ] Commit de77ecd4 ("bonding: improve link-status update in mii-monitoring") moves link status commitment into bond_mii_monitor(), but it still relies on the return value of bond_miimon_inspect() as the hint. We need to return non-zero as long as we propose a link status change. Fixes: de77ecd4 ("bonding: improve link-status update in mii-monitoring") Reported-by:
Benjamin Gilbert <benjamin.gilbert@coreos.com> Tested-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Mahesh Bandewar <maheshb@google.com> Signed-off-by:
-
Marc Gonzalez authored
[ Upstream commit 4813497b ] Before commit bf8f6952 ("Add blurb about RGMII") it was unclear whose responsibility it was to insert the required clock skew, and in hindsight, some PHY drivers got it wrong. The solution forward is to introduce a new property, explicitly requiring skew from the node to which it is attached. In the interim, this driver will handle all 4 RGMII modes identically (no skew). Fixes: 52dfc830 ("net: ethernet: add driver for Aurora VLSI NB8800 Ethernet controller") Signed-off-by:
-
Stefano Brivio authored
[ Upstream commit afce615a ] RFC 2465 defines ipv6IfStatsOutFragFails as: "The number of IPv6 datagrams that have been discarded because they needed to be fragmented at this output interface but could not be." The existing implementation, instead, would increase the counter twice in case we fail to allocate room for single fragments: once for the fragment, once for the datagram. This didn't look intentional though. In one of the two affected affected failure paths, the double increase was simply a result of a new 'goto fail' statement, introduced to avoid a skb leak. The other path appears to be affected since at least 2.6.12-rc2. Reported-by:
Sabrina Dubroca <sdubroca@redhat.com> Fixes: 1d325d21 ("ipv6: ip6_fragment: fix headroom tests and skb leak") Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
WANG Cong authored
[ Upstream commit c800aaf8 ] There are multiple reports showing we have a use-after-free in the timer prb_retire_rx_blk_timer_expired(), where we use struct tpacket_kbdq_core::pkbdq, a pg_vec, after it gets freed by free_pg_vec(). The interesting part is it is not freed via packet_release() but via packet_setsockopt(), which means we are not closing the socket. Looking into the big and fat function packet_set_ring(), this could happen if we satisfy the following conditions: 1. closing == 0, not on packet_release() path 2. req->tp_block_nr == 0, we don't allocate a new pg_vec 3. rx_ring->pg_vec is already set as V3, which means we already called packet_set_ring() wtih req->tp_block_nr > 0 previously 4. req->tp_frame_nr == 0, pass sanity check 5. po->mapped == 0, never called mmap() In this scenario we are clearing the old rx_ring->pg_vec, so we need to free this pg_vec, but we don't stop the timer on this path because of closing==0. The timer has to be stopped as long as we need to free pg_vec, therefore the check on closing!=0 is wrong, we should check pg_vec!=NULL instead. Thanks to liujian for testing different fixes. Reported-by: alexander.levin@verizon.com Reported-by:
Dave Jones <davej@codemonkey.org.uk> Reported-by:
liujian (CE) <liujian56@huawei.com> Tested-by:
-
Liping Zhang authored
[ Upstream commit 69ec932e ] Before the 'type' is validated, we shouldn't use it to fetch the ovs_ct_attr_lens's minlen and maxlen, else, out of bound access may happen. Fixes: 7f8a436e ("openvswitch: Add conntrack action") Signed-off-by:
Liping Zhang <zlpnobody@gmail.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
Thomas Jarosch authored
[ Upstream commit 9476d393 ] DMA transfers are not allowed to buffers that are on the stack. Therefore allocate a buffer to store the result of usb_control_message(). Fixes these bugreports: https://bugzilla.kernel.org/show_bug.cgi?id=195217 https://bugzilla.redhat.com/show_bug.cgi?id=1421387 https://bugzilla.redhat.com/show_bug.cgi?id=1427398 Shortened kernel backtrace from 4.11.9-200.fc25.x86_64: kernel: ------------[ cut here ]------------ kernel: WARNING: CPU: 3 PID: 2957 at drivers/usb/core/hcd.c:1587 kernel: transfer buffer not dma capable kernel: Call Trace: kernel: dump_stack+0x63/0x86 kernel: __warn+0xcb/0xf0 kernel: warn_slowpath_fmt+0x5a/0x80 kernel: usb_hcd_map_urb_for_dma+0x37f/0x570 kernel: ? try_to_del_timer_sync+0x53/0x80 kernel: usb_hcd_submit_urb+0x34e/0xb90 kernel: ? schedule_timeout+0x17e/0x300 kernel: ? del_timer_sync+0x50/0x50 kernel: ? __slab_free+0xa9/0x300 kernel: usb_submit_urb+0x2f4/0x560 kernel: ? urb_destroy+0x24/0x30 kernel: usb_start_wait_urb+0x6e/0x170 kernel: usb_control_msg+0xdc/0x120 kernel: mcs_get_reg+0x36/0x40 [mcs7780] kernel: mcs_net_open+0xb5/0x5c0 [mcs7780] ... Regression goes back to 4.9, so it's a good candidate for -stable. Though it's the decision of the maintainer. Thanks to Dan Williams for adding the "transfer buffer not dma capable" warning in the first place. It instantly pointed me in the right direction. Patch has been tested with transferring data from a Polar watch. Signed-off-by:
Thomas Jarosch <thomas.jarosch@intra2net.com> Signed-off-by:
-
Kosuke Tatsukawa authored
[ Upstream commit cbf5ecb3 ] balance-alb mode used to have transmit dynamic load balancing feature enabled by default. However, transmit dynamic load balancing no longer works in balance-alb after commit 8b426dc5 ("bonding: remove hardcoded value"). Both balance-tlb and balance-alb use the function bond_do_alb_xmit() to send packets. This function uses the parameter tlb_dynamic_lb. tlb_dynamic_lb used to have the default value of 1 for balance-alb, but now the value is set to 0 except in balance-tlb. Re-enable transmit dyanmic load balancing by initializing tlb_dynamic_lb for balance-alb similar to balance-tlb. Fixes: 8b426dc5 ("bonding: remove hardcoded value") Signed-off-by:
Kosuke Tatsukawa <tatsu@ab.jp.nec.com> Acked-by:
Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
-
WANG Cong authored
[ Upstream commit 153711f9 ] virtnet_set_mac_address() interprets mac address as struct sockaddr, but upper layer only allocates dev->addr_len which is ETH_ALEN + sizeof(sa_family_t) in this case. We lack a unified definition for mac address, so just fix the upper layer, this also allows drivers to interpret it to struct sockaddr freely. Reported-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Mahesh Bandewar authored
[ Upstream commit 8799a221 ] Net stack initialization currently initializes fib-trie after the first call to netdevice_notifier() call. In fact fib_trie initialization needs to happen before first rtnl_register(). It does not cause any problem since there are no devices UP at this moment, but trying to bring 'lo' UP at initialization would make this assumption wrong and exposes the issue. Fixes following crash Call Trace: ? alternate_node_alloc+0x76/0xa0 fib_table_insert+0x1b7/0x4b0 fib_magic.isra.17+0xea/0x120 fib_add_ifaddr+0x7b/0x190 fib_netdev_event+0xc0/0x130 register_netdevice_notifier+0x1c1/0x1d0 ip_fib_init+0x72/0x85 ip_rt_init+0x187/0x1e9 ip_init+0xe/0x1a inet_init+0x171/0x26c ? ipv4_offload_init+0x66/0x66 do_one_initcall+0x43/0x160 kernel_init_freeable+0x191/0x219 ? rest_init+0x80/0x80 kernel_init+0xe/0x150 ret_from_fork+0x22/0x30 Code: f6 46 23 04 74 86 4c 89 f7 e8 ae 45 01 00 49 89 c7 4d 85 ff 0f 85 7b ff ff ff 31 db eb 08 4c 89 ff e8 16 47 01 00 48 8b 44 24 38 <45> 8b 6e 14 4d 63 76 74 48 89 04 24 0f 1f 44 00 00 48 83 c4 08 RIP: kmem_cache_alloc+0xcf/0x1c0 RSP: ffff9b1500017c28 CR2: 0000000000000014 Fixes: 7b1a74fd ("[NETNS]: Refactor fib initialization so it can handle multiple namespaces.") Fixes: 7f9b8052 ("[IPV4]: fib hash|trie initialization") Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit be35e8c5 ] The BCM53125 entry was missing an arl_entries member which would basically prevent the ARL search from terminating properly. This switch has 4 ARL entries, so add that. Fixes: 1da6df85 ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit 6399f1fa ] In some cases, offset can overflow and can cause an infinite loop in ip6_find_1stfragopt(). Make it unsigned int to prevent the overflow, and cap it at IPV6_MAXPLEN, since packets larger than that should be invalid. This problem has been here since before the beginning of git history. Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
David Ahern authored
[ Upstream commit 3753654e ] This reverts commit cd8966e7. The duplicate CHANGEADDR event message is sent regardless of link status whereas the setlink changes only generate a notification when the link is up. Not sending a notification when the link is down breaks dhcpcd which only processes hwaddr changes when the link is down. Fixes reported regression: https://bugzilla.kernel.org/show_bug.cgi?id=196355Reported-by:
Yaroslav Isakov <yaroslav.isakov@gmail.com> Signed-off-by:
-
Martin Hundebøll authored
[ Upstream commit bb0a2675 ] Commit f39908d3 ('net: dsa: mv88e6xxx: Set the CMODE for mv88e6390 ports 9 & 10') added support for setting the CMODE for the 6390X family, but only enabled it for 9290 and 6390 - and left out 6390X. Fix support for setting the CMODE on 6390X also by assigning mv88e6390x_port_set_cmode() to the .port_set_cmode function pointer in mv88e6390x_ops too. Fixes: f39908d3 ("net: dsa: mv88e6xxx: Set the CMODE for mv88e6390 ports 9 & 10") Signed-off-by:
Martin Hundebøll <mnhu@prevas.dk> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
-
