- Add driver registration for dv1394/video1394/raw1394.
- Fix 3 sleep-while-atomic bugs in ohci1394 and ieee1394.
- Cleanup some bus-reset handling in ohci1394.
- Add empty config-rom handling.
- Check and handle SBP-2 logins active/available for non-exclusive
  logins.
- Fix bug in SBP-2 DMA cleanup.

In the interests of SMP scalability the ext2 free blocks and free inodes
counters are "approximate".  But there is a piece of code in the Orlov
allocator which fails due to boundary conditions on really small
filesystems.

Fix that up via a final allocation pass which simply uses first-fit for
allocation of a directory inode.

My recent micro-optmisation to these functions broke the pfn_valid()
checks.  Revert it.

This BUG_ON is triggering via ppp's line discipline flushing, due to
brokenness in tty_io.c.

We need to fix tty.  Meanwhile, let's not gratuitously nuke people's boxes.

into home.transmeta.com:/home/torvalds/v2.5/linux

into kernel.bkbits.net:/home/davem/net-2.5

into hum.(none):/garz/repo/net-drivers-2.5

with user pointer annotations.

verifies declarations against definitions and checks argument
types.

The patch below is needed to avoid a deadlock on fs->lock.  Without
the patch, if __emul_lookup_dentry() returns 0, we fail to reacquire
current->fs->lock and then go ahead to read_unlock() it anyhow.  Bad
for your health.

I believe the bug was introduced when the fast pathwalk was reverted
in order to introduce the RCU lockless path walking.

 - lcs: Don't free net_device in lcs_stop_device.
 - lcs: Reset card after LGW initiaited stoplan.
 - lcs: Fix bug in lcs_tasklet
 - ctc: Get channel structure from private pointer. Remove __NO_VERSION__.
 - lcs,ctc,iucv: Remove MOD_INC_USE_COUNT/MOD_DEC_USE_COUNT. Set dev->owner.

The problem is caused by the devfs_mk_dir simplification that went in a
couple of weeks ago that didn't update one of the coda call-sites.

Fix for trivial typo.  Without it, you can't insert anything on top of
agpgart.ko because the agp_register_driver() will erroneously pick up
the symbol version from agp_backend_acquire().

This converts connection tracking and all the connection tracking
modules to handle non-linear skbs.  Enough interfaces have been
broken in the process that old helpers won't compile.

Interfaces which used to take a "void *data, int len" or
"struct iphdr *iph, int len" now take the skb itself (and an offset to
the data in the case of the first interface), which is not
linearized in any way (although Alexey says after ip_rcv the IP header
is always linear, so IPv4 netfilter hooks can always assume a linear
IP hdr).

Helpers which examine data (amanda, FTP, IRC) now copy it into a buffer
and examine that.

Clean up "pendcount" locking (or rather - lack there-of) by making it a
per-timer thing and thus automatically protected by the timer lock.

Fix whitespace damage.

into nuts.ninka.net:/home/davem/src/BK/net-2.5

into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux

Now that the kernel provides code user programs are executing directly
(I mean the vsyscall code on x86) it is necessary to add unwind
information for that code as well.  The unwind information is used not
only in C++ code.

This patch adds a AT_SYSINFO_EH_FRAME ELF aux-table value that points to
the unwinding block description for the sysinfo frame, and makes sure
the AT_* value is passed to applications.  It defines the static data
for the unwind blocks (two, one for int80 and the other for sysenter),
and finally adds code to copy the data in place.

testing. 

Found by 'sparse', my source parser tool.

Forward port of Jay's 2.4 patch.
Also I've cleaned up EISA configury - we only need it for
systems with EISA.

Ivan.

While testing our upcoming kernel update for 7.2 alpha, I've encountered
a problem with move_initrd. It allocates a page-aligned chunk to move
the initrd into, but it doesn't allocate the entire last
page. Subsequent bootmem allocations can then be filled from the last
page used be the initrd.  This then becomes a problem when the initrd
memory is released.

The 2.5 kernels may hang on execve(). Most easily this can be reproduced
by submitting forms in mozilla, apparently because it does execve with
very long argument strings.
That's what happens in do_execve, I suppose:
	bprm.mm = mm_alloc();
	...
	init_new_context(current, bprm.mm); here we update current ptbr
					    with new mm->pgd
	...
	copy_strings;
			interrupt -> do_softirq -> switch to ksoftirqd
			...
			switch back to do_execve;
	copy_strings -  immediate page fault in copy_user that we can't
			handle because the new ptbr has been activated
			after context switch and current->mm is not
			valid anymore.

The fix is to not update ptbr for current task in init_new_context(),
as we do it later in activate_mm() anyway.

With it my (UP) boxes look quite stable so far.

Ivan.

into are.twiddle.net:/home/rth/BK/axp-2.5

This one gets rid of sys32_{get,set}affinity in favor of a unified
compat implementation.

From: Trond Myklebust <trond.myklebust@fys.uio.no>

The patch fixes some problems with NFS under heavy writeout.

NFS pages can be in a clean but unreclaimable state.  They are unreclaimable
because the server has not yet acked the write - we may need to "redirty"
them if the server crashes.

These are referred to as "unstable" pages.  We need to count them alongside
dirty and writeback pages when making flushing and throttling decisions.
Otherwise the machine can be flooded with these pages and the VM has
problems.

The MCE code is setting up a timer whose handler uses the workqueue code
before workqueue is initialised.  If you boot slowly it oopses.

Convert the MCE code to use an initcall.

From: george anzinger <george@mvista.com>

The MAJOR problem was a hang in the kernel if a user tried to delete a
repeating timer that had a signal delivery pending. I was putting the
task in a loop waiting for that same task to pick up the signal. OUCH!

A minor issue relates to the need by the glibc folks, to specify a
particular thread to get the signal.  I had this code in all along,
but somewhere in 2.5 the signal code was made POSIX compliant, i.e.
deliver to the first thread that doesn't have it masked out.

This now uses the code from the above mentioned clean up.  Most
signals go to the group delivery signal code, however, those
specifying THREAD_ID (an extension to the POSIX standard) are sent to
the specified thread.  That thread MUST be in the same thread group as
the thread that creates the timer.

drivers/md/xor.c needs kernel_fpu_begin() for the mmx checksumming functions.
 So export that to GPL modules.

use `unsigned long' for a jiffies-holding type.

use-after-free races have been seen due to the workqueue timer in the tty
structure going off after the tty was freed.

Fix that up by using cancel_scheduled_work() and flush_scheduled_work().

The workqueue code currently has a notion of a per-cpu queue being "busy".
flush_scheduled_work()'s responsibility is to wait for a queue to be not busy.

Problem is, flush_scheduled_work() can easily hang up.

- The workqueue is deemed "busy" when there are pending delayed
  (timer-based) works.  But if someone repeatedly schedules new delayed work
  in the callback, the queue will never fall idle, and flush_scheduled_work()
  will not terminate.

- If someone reschedules work (not delayed work) in the work function, that
  too will cause the queue to never go idle, and flush_scheduled_work() will
  not terminate.

So what this patch does is:

- Create a new "cancel_delayed_work()" which will try to kill off any
  timer-based delayed works.

- Change flush_scheduled_work() so that it is immune to people re-adding
  work in the work callout handler.

  We can do this by recognising that the caller does *not* want to wait
  until the workqueue is "empty".  The caller merely wants to wait until all
  works which were pending at the time flush_scheduled_work() was called have
  completed.

  The patch uses a couple of sequence numbers for that.

So now, if someone wants to reliably remove delayed work they should do:


	/*
	 * Make sure that my work-callback will no longer schedule new work
	 */
	my_driver_is_shutting_down = 1;

	/*
	 * Kill off any pending delayed work
	 */
	cancel_delayed_work(&my_work);

	/*
	 * OK, there will be no new works scheduled.  But there may be one
	 * currently queued or in progress.  So wait for that to complete.
	 */
	flush_scheduled_work();


The patch also changes the flush_workqueue() sleep to be uninterruptible.
We cannot legally bale out if a signal is delivered anyway.