- 23 Feb, 2017 40 commits
-
-
John David Anglin authored
commit c0452fb9 upstream. We are still troubled by occasional random segmentation faults and memory memory corruption on SMP machines. The causes quite a few package builds to fail on the Debian buildd machines for parisc. When gcc-6 failed to build three times in a row, I looked again at the TLB related code. I found a couple of issues. This is the first. In general, we need to ensure page table updates and corresponding TLB purges are atomic. The attached patch fixes an instance in pci-dma.c where the page table update was not guarded by the TLB lock. Tested on rp3440 and c8000. So far, no further random segmentation faults have been observed. Signed-off-by:
John David Anglin <dave.anglin@bell.net> Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Andrey Ryabinin authored
commit f5527fff upstream. This fixes CVE-2016-8650. If mpi_powm() is given a zero exponent, it wants to immediately return either 1 or 0, depending on the modulus. However, if the result was initalised with zero limb space, no limbs space is allocated and a NULL-pointer exception ensues. Fix this by allocating a minimal amount of limb space for the result when the 0-exponent case when the result is 1 and not touching the limb space when the result is 0. This affects the use of RSA keys and X.509 certificates that carry them. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff8138ce5d>] mpi_powm+0x32/0x7e6 PGD 0 Oops: 0002 [#1] SMP Modules linked in: CPU: 3 PID: 3014 Comm: keyctl Not tainted 4.9.0-rc6-fscache+ #278 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 task: ffff8804011944c0 task.stack: ffff880401294000 RIP: 0010:[<ffffffff8138ce5d>] [<ffffffff8138ce5d>] mpi_powm+0x32/0x7e6 RSP: 0018:ffff880401297ad8 EFLAGS: 00010212 RAX: 0000000000000000 RBX: ffff88040868bec0 RCX: ffff88040868bba0 RDX: ffff88040868b260 RSI: ffff88040868bec0 RDI: ffff88040868bee0 RBP: ffff880401297ba8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000047 R11: ffffffff8183b210 R12: 0000000000000000 R13: ffff8804087c7600 R14: 000000000000001f R15: ffff880401297c50 FS: 00007f7a7918c700(0000) GS:ffff88041fb80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000401250000 CR4: 00000000001406e0 Stack: ffff88040868bec0 0000000000000020 ffff880401297b00 ffffffff81376cd4 0000000000000100 ffff880401297b10 ffffffff81376d12 ffff880401297b30 ffffffff81376f37 0000000000000100 0000000000000000 ffff880401297ba8 Call Trace: [<ffffffff81376cd4>] ? __sg_page_iter_next+0x43/0x66 [<ffffffff81376d12>] ? sg_miter_get_next_page+0x1b/0x5d [<ffffffff81376f37>] ? sg_miter_next+0x17/0xbd [<ffffffff8138ba3a>] ? mpi_read_raw_from_sgl+0xf2/0x146 [<ffffffff8132a95c>] rsa_verify+0x9d/0xee [<ffffffff8132acca>] ? pkcs1pad_sg_set_buf+0x2e/0xbb [<ffffffff8132af40>] pkcs1pad_verify+0xc0/0xe1 [<ffffffff8133cb5e>] public_key_verify_signature+0x1b0/0x228 [<ffffffff8133d974>] x509_check_for_self_signed+0xa1/0xc4 [<ffffffff8133cdde>] x509_cert_parse+0x167/0x1a1 [<ffffffff8133d609>] x509_key_preparse+0x21/0x1a1 [<ffffffff8133c3d7>] asymmetric_key_preparse+0x34/0x61 [<ffffffff812fc9f3>] key_create_or_update+0x145/0x399 [<ffffffff812fe227>] SyS_add_key+0x154/0x19e [<ffffffff81001c2b>] do_syscall_64+0x80/0x191 [<ffffffff816825e4>] entry_SYSCALL64_slow_path+0x25/0x25 Code: 56 41 55 41 54 53 48 81 ec a8 00 00 00 44 8b 71 04 8b 42 04 4c 8b 67 18 45 85 f6 89 45 80 0f 84 b4 06 00 00 85 c0 75 2f 41 ff ce <49> c7 04 24 01 00 00 00 b0 01 75 0b 48 8b 41 18 48 83 38 01 0f RIP [<ffffffff8138ce5d>] mpi_powm+0x32/0x7e6 RSP <ffff880401297ad8> CR2: 0000000000000000 ---[ end trace d82015255d4a5d8d ]--- Basically, this is a backport of a libgcrypt patch: http://git.gnupg.org/cgi-bin/gitweb.cgi?p=libgcrypt.git;a=patch;h=6e1adb05d290aeeb1c230c763970695f4a538526 Fixes: cdec9cb5 ("crypto: GnuPG based MPI lib - source files (part 1)") Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by:
David Howells <dhowells@redhat.com> cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> cc: linux-ima-devel@lists.sourceforge.net Signed-off-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
Radim Krčmář authored
commit 2117d539 upstream. em_jmp_far and em_ret_far assumed that setting IP can only fail in 64 bit mode, but syzkaller proved otherwise (and SDM agrees). Code segment was restored upon failure, but it was left uninitialized outside of long mode, which could lead to a leak of host kernel stack. We could have fixed that by always saving and restoring the CS, but we take a simpler approach and just break any guest that manages to fail as the error recovery is error-prone and modern CPUs don't need emulator for this. Found by syzkaller: WARNING: CPU: 2 PID: 3668 at arch/x86/kvm/emulate.c:2217 em_ret_far+0x428/0x480 Kernel panic - not syncing: panic_on_warn set ... CPU: 2 PID: 3668 Comm: syz-executor Not tainted 4.9.0-rc4+ #49 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 [...] Call Trace: [...] __dump_stack lib/dump_stack.c:15 [...] dump_stack+0xb3/0x118 lib/dump_stack.c:51 [...] panic+0x1b7/0x3a3 kernel/panic.c:179 [...] __warn+0x1c4/0x1e0 kernel/panic.c:542 [...] warn_slowpath_null+0x2c/0x40 kernel/panic.c:585 [...] em_ret_far+0x428/0x480 arch/x86/kvm/emulate.c:2217 [...] em_ret_far_imm+0x17/0x70 arch/x86/kvm/emulate.c:2227 [...] x86_emulate_insn+0x87a/0x3730 arch/x86/kvm/emulate.c:5294 [...] x86_emulate_instruction+0x520/0x1ba0 arch/x86/kvm/x86.c:5545 [...] emulate_instruction arch/x86/include/asm/kvm_host.h:1116 [...] complete_emulated_io arch/x86/kvm/x86.c:6870 [...] complete_emulated_mmio+0x4e9/0x710 arch/x86/kvm/x86.c:6934 [...] kvm_arch_vcpu_ioctl_run+0x3b7a/0x5a90 arch/x86/kvm/x86.c:6978 [...] kvm_vcpu_ioctl+0x61e/0xdd0 arch/x86/kvm/../../../virt/kvm/kvm_main.c:2557 [...] vfs_ioctl fs/ioctl.c:43 [...] do_vfs_ioctl+0x18c/0x1040 fs/ioctl.c:679 [...] SYSC_ioctl fs/ioctl.c:694 [...] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:685 [...] entry_SYSCALL_64_fastpath+0x1f/0xc2 Reported-by:
Dmitry Vyukov <dvyukov@google.com> Fixes: d1442d85 ("KVM: x86: Handle errors when RIP is set during far jumps") Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Dan Carpenter authored
commit c4597fd7 upstream. 'm_io' is stored in 6 bits so it's a number in the 0-63 range. Static analysis tools complain that 1 << 63 will wrap so I have changed it to 1ULL << m_io. This code is over three years old so presumably the bug doesn't happen very frequently in real life or someone would have complained by now. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Alex Thorlton <athorlton@sgi.com> Cc: Dimitri Sivanich <sivanich@sgi.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Travis <travis@sgi.com> Cc: Nathan Zimmer <nzimmer@sgi.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kernel-janitors@vger.kernel.org Fixes: b15cc4a1 ("x86, uv, uv3: Update x2apic Support for SGI UV3") Link: http://lkml.kernel.org/r/20161123221908.GA23997@mwandaSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit 22a1e778 upstream. The commit 8dfbcc43 ("[media] xc2028: avoid use after free") tried to address the reported use-after-free by clearing the reference. However, it's clearing the wrong pointer; it sets NULL to priv->ctrl.fname, but it's anyway overwritten by the next line memcpy(&priv->ctrl, p, sizeof(priv->ctrl)). OTOH, the actual code accessing the freed string is the strcmp() call with priv->fname: if (!firmware_name[0] && p->fname && priv->fname && strcmp(p->fname, priv->fname)) free_firmware(priv); where priv->fname points to the previous file name, and this was already freed by kfree(). For fixing the bug properly, this patch does the following: - Keep the copy of firmware file name in only priv->fname, priv->ctrl.fname isn't changed; - The allocation is done only when the firmware gets loaded; - The kfree() is called in free_firmware() commonly Fixes: commit 8dfbcc43 ('[media] xc2028: avoid use after free') Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Chris Metcalf authored
commit e658a6f1 upstream. For large values of "mult" and long uptimes, the intermediate result of "cycles * mult" can overflow 64 bits. For example, the tile platform calls clocksource_cyc2ns with a 1.2 GHz clock; we have mult = 853, and after 208.5 days, we overflow 64 bits. Since clocksource_cyc2ns() is intended to be used for relative cycle counts, not absolute cycle counts, performance is more importance than accepting a wider range of cycle values. So, just use mult_frac() directly in tile's sched_clock(). Commit 4cecf6d4 ("sched, x86: Avoid unnecessary overflow in sched_clock") by Salman Qazi results in essentially the same generated code for x86 as this change does for tile. In fact, a follow-on change by Salman introduced mult_frac() and switched to using it, so the C code was largely identical at that point too. Peter Zijlstra then added mul_u64_u32_shr() and switched x86 to use it. This is, in principle, better; by optimizing the 64x64->64 multiplies to be 32x32->64 multiplies we can potentially save some time. However, the compiler piplines the 64x64->64 multiplies pretty well, and the conditional branch in the generic mul_u64_u32_shr() causes some bubbles in execution, with the result that it's pretty much a wash. If tilegx provided its own implementation of mul_u64_u32_shr() without the conditional branch, we could potentially save 3 cycles, but that seems like small gain for a fair amount of additional build scaffolding; no other platform currently provides a mul_u64_u32_shr() override, and tile doesn't currently have an <asm/div64.h> header to put the override in. Additionally, gcc currently has an optimization bug that prevents it from recognizing the opportunity to use a 32x32->64 multiply, and so the result would be no better than the existing mult_frac() until such time as the compiler is fixed. For now, just using mult_frac() seems like the right answer. Signed-off-by:
Chris Metcalf <cmetcalf@mellanox.com> Signed-off-by:
-
Andy Lutomirski authored
commit fc0e81b2 upstream. On the 80486 DX, it seems that some exceptions may leave garbage in the high bits of CS. This causes sporadic failures in which early_fixup_exception() refuses to fix up an exception. As far as I can tell, this has been buggy for a long time, but the problem seems to have been exacerbated by commits: 1e02ce4c ("x86: Store a per-cpu shadow copy of CR4") e1bfc11c ("x86/init: Fix cr4_init_shadow() on CR4-less machines") This appears to have broken for as long as we've had early exception handling. [ This backport should apply to kernels from 3.4 - 4.5. ] Fixes: 4c5023a3 ("x86-32: Handle exception table entries during early boot") Cc: H. Peter Anvin <hpa@zytor.com> Cc: stable@vger.kernel.org Reported-by:
Matthew Whitehead <tedheadster@gmail.com> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
-
John Johansen authored
commit 3d40658c upstream. After a policy replacement, the task cred may be out of date and need to be updated. However change_hat is using the stale profiles from the out of date cred resulting in either: a stale profile being applied or, incorrect failure when searching for a hat profile as it has been migrated to the new parent profile. Fixes: 01e2b670 (failure to find hat) Fixes: 898127c3 (stale policy being applied) Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1000287Signed-off-by:
John Johansen <john.johansen@canonical.com> Signed-off-by:
-
Guillaume Nault authored
commit 32c23116 upstream. Lock socket before checking the SOCK_ZAPPED flag in l2tp_ip6_bind(). Without lock, a concurrent call could modify the socket flags between the sock_flag(sk, SOCK_ZAPPED) test and the lock_sock() call. This way, a socket could be inserted twice in l2tp_ip6_bind_table. Releasing it would then leave a stale pointer there, generating use-after-free errors when walking through the list or modifying adjacent entries. BUG: KASAN: use-after-free in l2tp_ip6_close+0x22e/0x290 at addr ffff8800081b0ed8 Write of size 8 by task syz-executor/10987 CPU: 0 PID: 10987 Comm: syz-executor Not tainted 4.8.0+ #39 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 ffff880031d97838 ffffffff829f835b ffff88001b5a1640 ffff8800081b0ec0 ffff8800081b15a0 ffff8800081b6d20 ffff880031d97860 ffffffff8174d3cc ffff880031d978f0 ffff8800081b0e80 ffff88001b5a1640 ffff880031d978e0 Call Trace: [<ffffffff829f835b>] dump_stack+0xb3/0x118 lib/dump_stack.c:15 [<ffffffff8174d3cc>] kasan_object_err+0x1c/0x70 mm/kasan/report.c:156 [< inline >] print_address_description mm/kasan/report.c:194 [<ffffffff8174d666>] kasan_report_error+0x1f6/0x4d0 mm/kasan/report.c:283 [< inline >] kasan_report mm/kasan/report.c:303 [<ffffffff8174db7e>] __asan_report_store8_noabort+0x3e/0x40 mm/kasan/report.c:329 [< inline >] __write_once_size ./include/linux/compiler.h:249 [< inline >] __hlist_del ./include/linux/list.h:622 [< inline >] hlist_del_init ./include/linux/list.h:637 [<ffffffff8579047e>] l2tp_ip6_close+0x22e/0x290 net/l2tp/l2tp_ip6.c:239 [<ffffffff850b2dfd>] inet_release+0xed/0x1c0 net/ipv4/af_inet.c:415 [<ffffffff851dc5a0>] inet6_release+0x50/0x70 net/ipv6/af_inet6.c:422 [<ffffffff84c4581d>] sock_release+0x8d/0x1d0 net/socket.c:570 [<ffffffff84c45976>] sock_close+0x16/0x20 net/socket.c:1017 [<ffffffff817a108c>] __fput+0x28c/0x780 fs/file_table.c:208 [<ffffffff817a1605>] ____fput+0x15/0x20 fs/file_table.c:244 [<ffffffff813774f9>] task_work_run+0xf9/0x170 [<ffffffff81324aae>] do_exit+0x85e/0x2a00 [<ffffffff81326dc8>] do_group_exit+0x108/0x330 [<ffffffff81348cf7>] get_signal+0x617/0x17a0 kernel/signal.c:2307 [<ffffffff811b49af>] do_signal+0x7f/0x18f0 [<ffffffff810039bf>] exit_to_usermode_loop+0xbf/0x150 arch/x86/entry/common.c:156 [< inline >] prepare_exit_to_usermode arch/x86/entry/common.c:190 [<ffffffff81006060>] syscall_return_slowpath+0x1a0/0x1e0 arch/x86/entry/common.c:259 [<ffffffff85e4d726>] entry_SYSCALL_64_fastpath+0xc4/0xc6 Object at ffff8800081b0ec0, in cache L2TP/IPv6 size: 1448 Allocated: PID = 10987 [ 1116.897025] [<ffffffff811ddcb6>] save_stack_trace+0x16/0x20 [ 1116.897025] [<ffffffff8174c736>] save_stack+0x46/0xd0 [ 1116.897025] [<ffffffff8174c9ad>] kasan_kmalloc+0xad/0xe0 [ 1116.897025] [<ffffffff8174cee2>] kasan_slab_alloc+0x12/0x20 [ 1116.897025] [< inline >] slab_post_alloc_hook mm/slab.h:417 [ 1116.897025] [< inline >] slab_alloc_node mm/slub.c:2708 [ 1116.897025] [< inline >] slab_alloc mm/slub.c:2716 [ 1116.897025] [<ffffffff817476a8>] kmem_cache_alloc+0xc8/0x2b0 mm/slub.c:2721 [ 1116.897025] [<ffffffff84c4f6a9>] sk_prot_alloc+0x69/0x2b0 net/core/sock.c:1326 [ 1116.897025] [<ffffffff84c58ac8>] sk_alloc+0x38/0xae0 net/core/sock.c:1388 [ 1116.897025] [<ffffffff851ddf67>] inet6_create+0x2d7/0x1000 net/ipv6/af_inet6.c:182 [ 1116.897025] [<ffffffff84c4af7b>] __sock_create+0x37b/0x640 net/socket.c:1153 [ 1116.897025] [< inline >] sock_create net/socket.c:1193 [ 1116.897025] [< inline >] SYSC_socket net/socket.c:1223 [ 1116.897025] [<ffffffff84c4b46f>] SyS_socket+0xef/0x1b0 net/socket.c:1203 [ 1116.897025] [<ffffffff85e4d685>] entry_SYSCALL_64_fastpath+0x23/0xc6 Freed: PID = 10987 [ 1116.897025] [<ffffffff811ddcb6>] save_stack_trace+0x16/0x20 [ 1116.897025] [<ffffffff8174c736>] save_stack+0x46/0xd0 [ 1116.897025] [<ffffffff8174cf61>] kasan_slab_free+0x71/0xb0 [ 1116.897025] [< inline >] slab_free_hook mm/slub.c:1352 [ 1116.897025] [< inline >] slab_free_freelist_hook mm/slub.c:1374 [ 1116.897025] [< inline >] slab_free mm/slub.c:2951 [ 1116.897025] [<ffffffff81748b28>] kmem_cache_free+0xc8/0x330 mm/slub.c:2973 [ 1116.897025] [< inline >] sk_prot_free net/core/sock.c:1369 [ 1116.897025] [<ffffffff84c541eb>] __sk_destruct+0x32b/0x4f0 net/core/sock.c:1444 [ 1116.897025] [<ffffffff84c5aca4>] sk_destruct+0x44/0x80 net/core/sock.c:1452 [ 1116.897025] [<ffffffff84c5ad33>] __sk_free+0x53/0x220 net/core/sock.c:1460 [ 1116.897025] [<ffffffff84c5af23>] sk_free+0x23/0x30 net/core/sock.c:1471 [ 1116.897025] [<ffffffff84c5cb6c>] sk_common_release+0x28c/0x3e0 ./include/net/sock.h:1589 [ 1116.897025] [<ffffffff8579044e>] l2tp_ip6_close+0x1fe/0x290 net/l2tp/l2tp_ip6.c:243 [ 1116.897025] [<ffffffff850b2dfd>] inet_release+0xed/0x1c0 net/ipv4/af_inet.c:415 [ 1116.897025] [<ffffffff851dc5a0>] inet6_release+0x50/0x70 net/ipv6/af_inet6.c:422 [ 1116.897025] [<ffffffff84c4581d>] sock_release+0x8d/0x1d0 net/socket.c:570 [ 1116.897025] [<ffffffff84c45976>] sock_close+0x16/0x20 net/socket.c:1017 [ 1116.897025] [<ffffffff817a108c>] __fput+0x28c/0x780 fs/file_table.c:208 [ 1116.897025] [<ffffffff817a1605>] ____fput+0x15/0x20 fs/file_table.c:244 [ 1116.897025] [<ffffffff813774f9>] task_work_run+0xf9/0x170 [ 1116.897025] [<ffffffff81324aae>] do_exit+0x85e/0x2a00 [ 1116.897025] [<ffffffff81326dc8>] do_group_exit+0x108/0x330 [ 1116.897025] [<ffffffff81348cf7>] get_signal+0x617/0x17a0 kernel/signal.c:2307 [ 1116.897025] [<ffffffff811b49af>] do_signal+0x7f/0x18f0 [ 1116.897025] [<ffffffff810039bf>] exit_to_usermode_loop+0xbf/0x150 arch/x86/entry/common.c:156 [ 1116.897025] [< inline >] prepare_exit_to_usermode arch/x86/entry/common.c:190 [ 1116.897025] [<ffffffff81006060>] syscall_return_slowpath+0x1a0/0x1e0 arch/x86/entry/common.c:259 [ 1116.897025] [<ffffffff85e4d726>] entry_SYSCALL_64_fastpath+0xc4/0xc6 Memory state around the buggy address: ffff8800081b0d80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8800081b0e00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8800081b0e80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ^ ffff8800081b0f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8800081b0f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== The same issue exists with l2tp_ip_bind() and l2tp_ip_bind_table. Fixes: c51ce497 ("l2tp: fix oops in L2TP IP sockets for connect() AF_UNSPEC case") Reported-by:
Baozeng Ding <sploving1@gmail.com> Reported-by:
Andrey Konovalov <andreyknvl@google.com> Tested-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Theodore Ts'o authored
commit 8cdf3372 upstream. If the block size or cluster size is insane, reject the mount. This is important for security reasons (although we shouldn't be just depending on this check). Ref: http://www.securityfocus.com/archive/1/539661 Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1332506Reported-by:
Borislav Petkov <bp@alien8.de> Reported-by:
Nikolay Borisov <kernel@kyup.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Paolo Bonzini authored
commit 7301d6ab upstream. Reported by syzkaller: [ INFO: suspicious RCU usage. ] 4.9.0-rc4+ #47 Not tainted ------------------------------- ./include/linux/kvm_host.h:536 suspicious rcu_dereference_check() usage! stack backtrace: CPU: 1 PID: 6679 Comm: syz-executor Not tainted 4.9.0-rc4+ #47 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffff880039e2f6d0 ffffffff81c2e46b ffff88003e3a5b40 0000000000000000 0000000000000001 ffffffff83215600 ffff880039e2f700 ffffffff81334ea9 ffffc9000730b000 0000000000000004 ffff88003c4f8420 ffff88003d3f8000 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff81c2e46b>] dump_stack+0xb3/0x118 lib/dump_stack.c:51 [<ffffffff81334ea9>] lockdep_rcu_suspicious+0x139/0x180 kernel/locking/lockdep.c:4445 [< inline >] __kvm_memslots include/linux/kvm_host.h:534 [< inline >] kvm_memslots include/linux/kvm_host.h:541 [<ffffffff8105d6ae>] kvm_gfn_to_hva_cache_init+0xa1e/0xce0 virt/kvm/kvm_main.c:1941 [<ffffffff8112685d>] kvm_lapic_set_vapic_addr+0xed/0x140 arch/x86/kvm/lapic.c:2217 Reported-by:
Paolo Bonzini <pbonzini@redhat.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
-
Ignacio Alvarado authored
commit 1650b4eb upstream. Function user_notifier_unregister should be called only once for each registered user notifier. Function kvm_arch_hardware_disable can be executed from an IPI context which could cause a race condition with a VCPU returning to user mode and attempting to unregister the notifier. Signed-off-by:
Ignacio Alvarado <ikalvarado@google.com> Fixes: 18863bdd ("KVM: x86 shared msr infrastructure") Reviewed-by:
-
Johan Hovold authored
commit a7fe9d46 upstream. Make sure to deregister the primary device in case the secondary emac fails to probe. kernel BUG at /home/johan/work/omicron/src/linux/net/core/dev.c:7743! ... [<c05b3dec>] (free_netdev) from [<c04fe6c0>] (cpsw_probe+0x9cc/0xe50) [<c04fe6c0>] (cpsw_probe) from [<c047b28c>] (platform_drv_probe+0x5c/0xc0) Fixes: d9ba8f9e ("driver: net: ethernet: cpsw: dual emac interface implementation") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 86e1d5ad upstream. Make sure to drop the reference taken by of_find_device_by_node() when looking up an mdio device from a phy_id property during probe. Fixes: 549985ee ("cpsw: simplify the setup of the register pointers") Signed-off-by:
-
Johan Hovold authored
commit c46ab7e0 upstream. Make sure to keep the platform device runtime-resumed throughout probe to avoid accessing the CPSW registers in the error path (e.g. for deferred probe) with clocks disabled: Unhandled fault: external abort on non-linefetch (0x1008) at 0xd0872d08 ... [<c04fabcc>] (cpsw_ale_control_set) from [<c04fb8b4>] (cpsw_ale_destroy+0x2c/0x44) [<c04fb8b4>] (cpsw_ale_destroy) from [<c04fea58>] (cpsw_probe+0xbd0/0x10c4) [<c04fea58>] (cpsw_probe) from [<c047b2a0>] (platform_drv_probe+0x5c/0xc0) Fixes: df828598 ("netdev: driver: ethernet: Add TI CPSW driver") Signed-off-by:
-
Johannes Berg authored
commit 9853a55e upstream. It's possible to make scanning consume almost arbitrary amounts of memory, e.g. by sending beacon frames with random BSSIDs at high rates while somebody is scanning. Limit the number of BSS table entries we're willing to cache to 1000, limiting maximum memory usage to maybe 4-5MB, but lower in practice - that would be the case for having both full-sized beacon and probe response frames for each entry; this seems not possible in practice, so a limit of 1000 entries will likely be closer to 0.5 MB. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johan Hovold authored
commit 48c1699d upstream. Make sure to drop the of_node reference also on failure to parse the speed property in of_phy_register_fixed_link(). Fixes: 3be2a49e ("of: provide a binding for fixed link PHYs") Signed-off-by:
-
Brian Norris authored
commit fcd2042e upstream. SSIDs aren't guaranteed to be 0-terminated. Let's cap the max length when we print them out. This can be easily noticed by connecting to a network with a 32-octet SSID: [ 3903.502925] mwifiex_pcie 0000:01:00.0: info: trying to associate to '0123456789abcdef0123456789abcdef <uninitialized mem>' bssid xx:xx:xx:xx:xx:xx Fixes: 5e6e3a92 ("wireless: mwifiex: initial commit for Marvell mwifiex driver") Signed-off-by:
Brian Norris <briannorris@chromium.org> Acked-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> [bwh: Backported to 3.16: adjust filename] Signed-off-by:
-
Matan Barak authored
commit 593ff73b upstream. Currently, if ib_copy_to_udata fails, the CQ won't be deleted from the radix tree and the HW (HW2SW). Fixes: 225c7b1f ('IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters') Signed-off-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
Daniel Jurgens <danielj@mellanox.com> Reviewed-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Eli Cohen authored
commit a1ab8402 upstream. For XRC QP CQs may not exist. Check before attempting dereference. Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by:
Eli Cohen <eli@mellanox.com> Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Reviewed-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
-
Moshe Lazer authored
commit 6bc1a656 upstream. When calling reg_mr of large MRs (e.g. 4GB) from multiple processes and MR caches can't supply the required amount of MRs the slow-path of MR allocation may be used. In this case we need to serialize the slow-path between the processes to avoid soft lock. Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by:
Moshe Lazer <moshel@mellanox.com> Signed-off-by:
-
Daniel Jurgens authored
commit 16b0e069 upstream. When creating kernel CQs use 128B CQE stride if the cache line size is 128B, 64B otherwise. This prevents multiple CQEs from residing in a 128B cache line, which can cause retries when there are concurrent read and writes in one cache line. Tested with IPoIB on PPC64, saw ~5% throughput improvement. Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by:
-
Mark Bloch authored
commit 3c7ba576 upstream. sg_alloc_table gets unsigned int as parameter while the driver returns it as size_t. Check npages isn't greater than maximum unsigned int. Fixes: eeb8461e ("IB: Refactor umem to use linear SG table") Signed-off-by:
-
Mark Bloch authored
commit 9db0ff53 upstream. When there is a CM id object that has port assigned to it, it means that the cm-id asked for the specific port that it should go by it, but if that port was removed (hot-unplug event) the cm-id was not updated. In order to fix that the port keeps a list of all the cm-id's that are planning to go by it, whenever the port is removed it marks all of them as invalid. This commit fixes a kernel panic which happens when running traffic between guests and we force reboot a guest mid traffic, it triggers a kernel panic: Call Trace: [<ffffffff815271fa>] ? panic+0xa7/0x16f [<ffffffff8152b534>] ? oops_end+0xe4/0x100 [<ffffffff8104a00b>] ? no_context+0xfb/0x260 [<ffffffff81084db2>] ? del_timer_sync+0x22/0x30 [<ffffffff8104a295>] ? __bad_area_nosemaphore+0x125/0x1e0 [<ffffffff81084240>] ? process_timeout+0x0/0x10 [<ffffffff8104a363>] ? bad_area_nosemaphore+0x13/0x20 [<ffffffff8104aabf>] ? __do_page_fault+0x31f/0x480 [<ffffffff81065df0>] ? default_wake_function+0x0/0x20 [<ffffffffa0752675>] ? free_msg+0x55/0x70 [mlx5_core] [<ffffffffa0753434>] ? cmd_exec+0x124/0x840 [mlx5_core] [<ffffffff8105a924>] ? find_busiest_group+0x244/0x9f0 [<ffffffff8152d45e>] ? do_page_fault+0x3e/0xa0 [<ffffffff8152a815>] ? page_fault+0x25/0x30 [<ffffffffa024da25>] ? cm_alloc_msg+0x35/0xc0 [ib_cm] [<ffffffffa024e821>] ? ib_send_cm_dreq+0xb1/0x1e0 [ib_cm] [<ffffffffa024f836>] ? cm_destroy_id+0x176/0x320 [ib_cm] [<ffffffffa024fb00>] ? ib_destroy_cm_id+0x10/0x20 [ib_cm] [<ffffffffa034f527>] ? ipoib_cm_free_rx_reap_list+0xa7/0x110 [ib_ipoib] [<ffffffffa034f590>] ? ipoib_cm_rx_reap+0x0/0x20 [ib_ipoib] [<ffffffffa034f5a5>] ? ipoib_cm_rx_reap+0x15/0x20 [ib_ipoib] [<ffffffff81094d20>] ? worker_thread+0x170/0x2a0 [<ffffffff8109b2a0>] ? autoremove_wake_function+0x0/0x40 [<ffffffff81094bb0>] ? worker_thread+0x0/0x2a0 [<ffffffff8109aef6>] ? kthread+0x96/0xa0 [<ffffffff8100c20a>] ? child_rip+0xa/0x20 [<ffffffff8109ae60>] ? kthread+0x0/0xa0 [<ffffffff8100c200>] ? child_rip+0x0/0x20 Fixes: a977049d ("[PATCH] IB: Add the kernel CM implementation") Signed-off-by:
Erez Shitrit <erezsh@mellanox.com> Reviewed-by:
-
Tariq Toukan authored
commit 5b810a24 upstream. The real QP is destroyed in case of the ref count reaches zero, but for XRC target QPs this call was missed and caused to QP leaks. Let's call to destroy for all flows. Fixes: 0e0ec7e0 ('RDMA/core: Export ib_open_qp() to share XRC...') Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
Noa Osherovich <noaos@mellanox.com> Signed-off-by:
-
Keith Busch authored
commit d4875622 upstream. The nvme_remove function tears down all allocated resources in the correct order, so no need to free queues on error during initialization. This fixes possible use-after-free errors when queues are still associated with a blk-mq hctx. Reported-by:
Scott Bauer <scott.bauer@intel.com> Tested-by:
Keith Busch <keith.busch@intel.com> Reviewed-by:
Sagi Grimberg <sagi@grimbeg.me> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jens Axboe <axboe@fb.com> [bwh: Backported to 3.16: - Adjust filename, context - Only nvme_setup_io_queues() needs to be fixed] Signed-off-by:
-
Paul Jakma authored
commit 2ab13292 upstream. The BRIM Brothers Zone DPMX is a bicycle powermeter. This ID is for the USB serial interface in its charging dock for the control pods, via which some settings for the pods can be modified. Signed-off-by:
Paul Jakma <paul@jakma.org> Cc: Barry Redmond <barry@brimbrothers.com> Signed-off-by:
-
Johan Hovold authored
commit 722f1910 upstream. Make sure to drop the reference taken by bus_find_device_by_name() before returning from mfd_clone_cell(). Fixes: a9bbba99 ("mfd: add platform_device sharing support for mfd") Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Sabrina Dubroca authored
commit 7e75f74a upstream. The size reported by rtnl_vfinfo_size doesn't match the space used by rtnl_fill_vfinfo. rtnl_vfinfo_size currently doesn't account for the nest attributes used by statistics (added in commit 3b766cd8), nor for struct ifla_vf_tx_rate (since commit ed616689, which added ifla_vf_rate to the dump without removing ifla_vf_tx_rate, but replaced ifla_vf_tx_rate with ifla_vf_rate in the size computation). Fixes: 3b766cd8 ("net/core: Add reading VF statistics through the PF netdevice") Fixes: ed616689 ("net-next:v4: Add support to configure SR-IOV VF minimum and maximum Tx rate through ip tool") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Peter Chen authored
commit a5d906bb upstream. This can fix below dump when the lock is accessed at host mode due to it is not initialized. [ 46.119638] INFO: trying to register non-static key. [ 46.124643] the code is fine but needs lockdep annotation. [ 46.130144] turning off the locking correctness validator. [ 46.135659] CPU: 0 PID: 690 Comm: cat Not tainted 4.9.0-rc3-00079-g4b75f1d #1210 [ 46.143075] Hardware name: Freescale i.MX6 SoloX (Device Tree) [ 46.148923] Backtrace: [ 46.151448] [<c010c460>] (dump_backtrace) from [<c010c658>] (show_stack+0x18/0x1c) [ 46.159038] r7:edf52000 [ 46.161412] r6:60000193 [ 46.163967] r5:00000000 [ 46.165035] r4:c0e25c2c [ 46.169109] [<c010c640>] (show_stack) from [<c03f58a4>] (dump_stack+0xb4/0xe8) [ 46.176362] [<c03f57f0>] (dump_stack) from [<c016d690>] (register_lock_class+0x4fc/0x56c) [ 46.184554] r10:c0e25d24 [ 46.187014] r9:edf53e70 [ 46.189569] r8:c1642444 [ 46.190637] r7:ee9da024 [ 46.193191] r6:00000000 [ 46.194258] r5:00000000 [ 46.196812] r4:00000000 [ 46.199185] r3:00000001 [ 46.203259] [<c016d194>] (register_lock_class) from [<c0171294>] (__lock_acquire+0x80/0x10f0) [ 46.211797] r10:c0e25d24 [ 46.214257] r9:edf53e70 [ 46.216813] r8:ee9da024 [ 46.217880] r7:c1642444 [ 46.220435] r6:edcd1800 [ 46.221502] r5:60000193 [ 46.224057] r4:00000000 [ 46.227953] [<c0171214>] (__lock_acquire) from [<c01726c0>] (lock_acquire+0x74/0x94) [ 46.235710] r10:00000001 [ 46.238169] r9:edf53e70 [ 46.240723] r8:edf53f80 [ 46.241790] r7:00000001 [ 46.244344] r6:00000001 [ 46.245412] r5:60000193 [ 46.247966] r4:00000000 [ 46.251866] [<c017264c>] (lock_acquire) from [<c096c8fc>] (_raw_spin_lock_irqsave+0x40/0x54) [ 46.260319] r7:ee1c6a00 [ 46.262691] r6:c062a570 [ 46.265247] r5:20000113 [ 46.266314] r4:ee9da014 [ 46.270393] [<c096c8bc>] (_raw_spin_lock_irqsave) from [<c062a570>] (ci_port_test_show+0x2c/0x70) [ 46.279280] r6:eebd2000 [ 46.281652] r5:ee9da010 [ 46.284207] r4:ee9da014 [ 46.286810] [<c062a544>] (ci_port_test_show) from [<c0248d04>] (seq_read+0x1ac/0x4f8) [ 46.294655] r9:edf53e70 [ 46.297028] r8:edf53f80 [ 46.299583] r7:ee1c6a00 [ 46.300650] r6:00000001 [ 46.303205] r5:00000000 [ 46.304273] r4:eebd2000 [ 46.306850] [<c0248b58>] (seq_read) from [<c039e864>] (full_proxy_read+0x54/0x6c) [ 46.314348] r10:00000000 [ 46.316808] r9:c0a6ad30 [ 46.319363] r8:edf53f80 [ 46.320430] r7:00020000 [ 46.322986] r6:b6de3000 [ 46.324053] r5:ee1c6a00 [ 46.326607] r4:c0248b58 [ 46.330505] [<c039e810>] (full_proxy_read) from [<c021ec98>] (__vfs_read+0x34/0x118) [ 46.338262] r9:edf52000 [ 46.340635] r8:c0107fc4 [ 46.343190] r7:00020000 [ 46.344257] r6:edf53f80 [ 46.346812] r5:c039e810 [ 46.347879] r4:ee1c6a00 [ 46.350447] [<c021ec64>] (__vfs_read) from [<c021fbd0>] (vfs_read+0x8c/0x11c) [ 46.357597] r9:edf52000 [ 46.359969] r8:c0107fc4 [ 46.362524] r7:edf53f80 [ 46.363592] r6:b6de3000 [ 46.366147] r5:ee1c6a00 [ 46.367214] r4:00020000 [ 46.369782] [<c021fb44>] (vfs_read) from [<c0220a4c>] (SyS_read+0x4c/0xa8) [ 46.376672] r8:c0107fc4 [ 46.379045] r7:00020000 [ 46.381600] r6:b6de3000 [ 46.382667] r5:ee1c6a00 [ 46.385222] r4:ee1c6a00 [ 46.387817] [<c0220a00>] (SyS_read) from [<c0107e20>] (ret_fast_syscall+0x0/0x1c) [ 46.395314] r7:00000003 [ 46.397687] r6:b6de3000 [ 46.400243] r5:00020000 [ 46.401310] r4:00020000 Fixes: 26c696c6 ("USB: Chipidea: rename struct ci13xxx variables from udc to ci") Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Borislav Petkov authored
commit c6a38553 upstream. So Sebastian turned off the PIE for kernel builds but that was too late - Kbuild.include already uses KBUILD_CFLAGS and trying to disable gcc options with, say cc-disable-warning, fails: gcc -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs ... -Wno-sign-compare -fno-asynchronous-unwind-tables -Wframe-address -c -x c /dev/null -o .31392.tmp /dev/null:1:0: error: code model kernel does not support PIC mode because that returns an error and we can't disable the warning. For example in this case: KBUILD_CFLAGS += $(call cc-disable-warning,frame-address,) which leads to gcc issuing all those warnings again. So let's turn off PIE/PIC at the earliest possible moment, when we declare KBUILD_CFLAGS so that cc-disable-warning picks it up too. Also, we need the $(call cc-option ...) because -fno-PIE is supported since gcc v3.4 and our lowest supported gcc version is 3.2 right now. Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Michal Marek <mmarek@suse.com> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Miklos Szeredi authored
commit 59c3b76c upstream. If pos is at the beginning of a page and copied is zero then page is not zeroed but is marked uptodate. Fix by skipping everything except unlock/put of page if zero bytes were copied. Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Fixes: 6b12c1b3 ("fuse: Implement write_begin/write_end callbacks") Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Petr Vandrovec authored
commit 2ce9d227 upstream. Some code (all error handling) submits CDBs that are allocated on the stack. This breaks with CB/CBI code that tries to create URB directly from SCSI command buffer - which happens to be in vmalloced memory with vmalloced kernel stacks. Let's make copy of the command in usb_stor_CB_transport. Signed-off-by:
Petr Vandrovec <petr@vandrovec.name> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Stephen Suryaputra Lin authored
commit 969447f2 upstream. In v2.6, ip_rt_redirect() calls arp_bind_neighbour() which returns 0 and then the state of the neigh for the new_gw is checked. If the state isn't valid then the redirected route is deleted. This behavior is maintained up to v3.5.7 by check_peer_redirect() because rt->rt_gateway is assigned to peer->redirect_learned.a4 before calling ipv4_neigh_lookup(). After commit 5943634f ("ipv4: Maintain redirect and PMTU info in struct rtable again."), ipv4_neigh_lookup() is performed without the rt_gateway assigned to the new_gw. In the case when rt_gateway (old_gw) isn't zero, the function uses it as the key. The neigh is most likely valid since the old_gw is the one that sends the ICMP redirect message. Then the new_gw is assigned to fib_nh_exception. The problem is: the new_gw ARP may never gets resolved and the traffic is blackholed. So, use the new_gw for neigh lookup. Changes from v1: - use __ipv4_neigh_lookup instead (per Eric Dumazet). Fixes: 5943634f ("ipv4: Maintain redirect and PMTU info in struct rtable again.") Signed-off-by:
Stephen Suryaputra Lin <ssurya@ieee.org> Signed-off-by:
-
WANG Cong authored
commit 2c1a4311 upstream. Fixes: commit f187bc6e ("ipv4: No need to set generic neighbour pointer") Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Andrey Grodzovsky authored
commit 18f6084a upstream. This is a work around for a bug with LSI Fusion MPT SAS2 when perfoming secure erase. Due to the very long time the operation takes, commands issued during the erase will time out and will trigger execution of the abort hook. Even though the abort hook is called for the specific command which timed out, this leads to entire device halt (scsi_state terminated) and premature termination of the secure erase. Set device state to busy while ATA passthrough commands are in progress. [mkp: hand applied to 4.9/scsi-fixes, tweaked patch description] Signed-off-by:
Andrey Grodzovsky <andrey2805@gmail.com> Acked-by:
Sreekanth Reddy <Sreekanth.Reddy@broadcom.com> Cc: <linux-scsi@vger.kernel.org> Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Chaitra P B <chaitra.basappa@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Cc: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Sean Young authored
commit ba13e98f upstream. When receiving a nec repeat, ensure the correct scancode is repeated rather than a random value from the stack. This removes the need for the bogus uninitialized_var() and also fixes the warnings: drivers/media/usb/dvb-usb/dib0700_core.c: In function ‘dib0700_rc_urb_completion’: drivers/media/usb/dvb-usb/dib0700_core.c:679: warning: ‘protocol’ may be used uninitialized in this function [sean addon: So after writing the patch and submitting it, I've bought the hardware on ebay. Without this patch you get random scancodes on nec repeats, which the patch indeed fixes.] Signed-off-by:
Sean Young <sean@mess.org> Tested-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Andrey Ryabinin authored
commit 70d78fe7 upstream. It could be not possible to freeze coredumping task when it waits for 'core_state->startup' completion, because threads are frozen in get_signal() before they got a chance to complete 'core_state->startup'. Inability to freeze a task during suspend will cause suspend to fail. Also CRIU uses cgroup freezer during dump operation. So with an unfreezable task the CRIU dump will fail because it waits for a transition from 'FREEZING' to 'FROZEN' state which will never happen. Use freezer_do_not_count() to tell freezer to ignore coredumping task while it waits for core_state->startup completion. Link: http://lkml.kernel.org/r/1475225434-3753-1-git-send-email-aryabinin@virtuozzo.comSigned-off-by:
Pavel Machek <pavel@ucw.cz> Acked-by:
Oleg Nesterov <oleg@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Jann Horn authored
commit dd111be6 upstream. When root activates a swap partition whose header has the wrong endianness, nr_badpages elements of badpages are swabbed before nr_badpages has been checked, leading to a buffer overrun of up to 8GB. This normally is not a security issue because it can only be exploited by root (more specifically, a process with CAP_SYS_ADMIN or the ability to modify a swap file/partition), and such a process can already e.g. modify swapped-out memory of any other userspace process on the system. Link: http://lkml.kernel.org/r/1477949533-2509-1-git-send-email-jann@thejh.netSigned-off-by:
Jann Horn <jann@thejh.net> Acked-by:
Kees Cook <keescook@chromium.org> Acked-by:
Jerome Marchand <jmarchan@redhat.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
-
Takashi Iwai authored
commit 9a254191 upstream. The commit [1a3f0991: ALSA: hda - Fix surround output pins for ASRock B150M mobo] introduced a fixup of pin configs for ASRock mobos to fix the surround outputs. However, this overrides the pin configs of the mic pins as if they are outputs-only, effectively disabling the mic inputs. Of course, it's a regression wrt mic functionality. Actually the pins 0x18 and 0x1a don't need to be changed; we just need to disable the bogus pins 0x14 and 0x15. Then the auto-parser will pick up mic pins as switchable and assign the surround outputs there. This patch removes the incorrect pin overrides of NID 0x18 and 0x1a from the ASRock fixup. Fixes: 1a3f0991 ('ALSA: hda - Fix surround output pins for ASRock...') Reported-and-tested-by:
Vitor Antunes <vitor.hda@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=187431Signed-off-by:
-
