Change the type of page_idx to unsigned long, and rename it -- it's just
a loop counter, not a page index.
Suggested-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-9-willy@infradead.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The word 'offset' is used ambiguously to mean 'byte offset within a
page', 'byte offset from the start of the file' and 'page offset from
the start of the file'.

Use 'index' to mean 'page offset from the start of the file' throughout
the readahead code.

[ We should probably rename the 'pgoff_t' type to 'pgidx_t' too - Linus ]
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-8-willy@infradead.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In this patch, only between __do_page_cache_readahead() and
read_pages(), but it will be extended in upcoming patches.  The
read_pages() function becomes aops centric, as this makes the most sense
by the end of the patchset.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-7-willy@infradead.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Filesystems which implement the upcoming ->readahead method will get
their pages by calling readahead_page() or readahead_page_batch().
These functions support large pages, even though none of the filesystems
to be converted do yet.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-6-willy@infradead.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Simplify the callers by moving the check for nr_pages and the BUG_ON
into read_pages().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-5-willy@infradead.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We used to assign the return value to a variable, which we then ignored.
Remove the pretence of caring.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-4-willy@infradead.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ondemand_readahead has two callers, neither of which use the return
value.  That means that both ra_submit and __do_page_cache_readahead()
can return void, and we don't need to worry that a present page in the
readahead window causes us to return a smaller nr_pages than we ought to
have.

Similarly, no caller uses the return value from
force_page_cache_readahead().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-3-willy@infradead.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "Change readahead API", v11.

This series adds a readahead address_space operation to replace the
readpages operation.  The key difference is that pages are added to the
page cache as they are allocated (and then looked up by the filesystem)
instead of passing them on a list to the readpages operation and having
the filesystem add them to the page cache.  It's a net reduction in code
for each implementation, more efficient than walking a list, and solves
the direct-write vs buffered-read problem reported by yu kuai at
http://lkml.kernel.org/r/20200116063601.39201-1-yukuai3@huawei.com

The only unconverted filesystems are those which use fscache.  Their
conversion is pending Dave Howells' rewrite which will make the
conversion substantially easier.  This should be completed by the end of
the year.

I want to thank the reviewers/testers; Dave Chinner, John Hubbard, Eric
Biggers, Johannes Thumshirn, Dave Sterba, Zi Yan, Christoph Hellwig and
Miklos Szeredi have done a marvellous job of providing constructive
criticism.

These patches pass an xfstests run on ext4, xfs & btrfs with no
regressions that I can tell (some of the tests seem a little flaky
before and remain flaky afterwards).

This patch (of 25):

The readahead code is part of the page cache so should be found in the
pagemap.h file.  force_page_cache_readahead is only used within mm, so
move it to mm/internal.h instead.  Remove the parameter names where they
add no value, and rename the ones which were actively misleading.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-1-willy@infradead.org
Link: http://lkml.kernel.org/r/20200414150233.24495-2-willy@infradead.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We have seen a following problem on a RPi4 with 1G RAM:

    BUG: Bad page state in process systemd-hwdb  pfn:35601
    page:ffff7e0000d58040 refcount:15 mapcount:131221 mapping:efd8fe765bc80080 index:0x1 compound_mapcount: -32767
    Unable to handle kernel paging request at virtual address efd8fe765bc80080
    Mem abort info:
      ESR = 0x96000004
      Exception class = DABT (current EL), IL = 32 bits
      SET = 0, FnV = 0
      EA = 0, S1PTW = 0
    Data abort info:
      ISV = 0, ISS = 0x00000004
      CM = 0, WnR = 0
    [efd8fe765bc80080] address between user and kernel address ranges
    Internal error: Oops: 96000004 [#1] SMP
    Modules linked in: btrfs libcrc32c xor xor_neon zlib_deflate raid6_pq mmc_block xhci_pci xhci_hcd usbcore sdhci_iproc sdhci_pltfm sdhci mmc_core clk_raspberrypi gpio_raspberrypi_exp pcie_brcmstb bcm2835_dma gpio_regulator phy_generic fixed sg scsi_mod efivarfs
    Supported: No, Unreleased kernel
    CPU: 3 PID: 408 Comm: systemd-hwdb Not tainted 5.3.18-8-default #1 SLE15-SP2 (unreleased)
    Hardware name: raspberrypi rpi/rpi, BIOS 2020.01 02/21/2020
    pstate: 40000085 (nZcv daIf -PAN -UAO)
    pc : __dump_page+0x268/0x368
    lr : __dump_page+0xc4/0x368
    sp : ffff000012563860
    x29: ffff000012563860 x28: ffff80003ddc4300
    x27: 0000000000000010 x26: 000000000000003f
    x25: ffff7e0000d58040 x24: 000000000000000f
    x23: efd8fe765bc80080 x22: 0000000000020095
    x21: efd8fe765bc80080 x20: ffff000010ede8b0
    x19: ffff7e0000d58040 x18: ffffffffffffffff
    x17: 0000000000000001 x16: 0000000000000007
    x15: ffff000011689708 x14: 3030386362353637
    x13: 6566386466653a67 x12: 6e697070616d2031
    x11: 32323133313a746e x10: 756f6370616d2035
    x9 : ffff00001168a840 x8 : ffff00001077a670
    x7 : 000000000000013d x6 : ffff0000118a43b5
    x5 : 0000000000000001 x4 : ffff80003dd9e2c8
    x3 : ffff80003dd9e2c8 x2 : 911c8d7c2f483500
    x1 : dead000000000100 x0 : efd8fe765bc80080
    Call trace:
     __dump_page+0x268/0x368
     bad_page+0xd4/0x168
     check_new_page_bad+0x80/0xb8
     rmqueue_bulk.constprop.26+0x4d8/0x788
     get_page_from_freelist+0x4d4/0x1228
     __alloc_pages_nodemask+0x134/0xe48
     alloc_pages_vma+0x198/0x1c0
     do_anonymous_page+0x1a4/0x4d8
     __handle_mm_fault+0x4e8/0x560
     handle_mm_fault+0x104/0x1e0
     do_page_fault+0x1e8/0x4c0
     do_translation_fault+0xb0/0xc0
     do_mem_abort+0x50/0xb0
     el0_da+0x24/0x28
    Code: f9401025 8b8018a0 9a851005 17ffffca (f94002a0)

Besides the underlying issue with page->mapping containing a bogus value
for some reason, we can see that __dump_page() crashed by trying to read
the pointer at mapping->host, turning a recoverable warning into full
Oops.

It can be expected that when page is reported as bad state for some
reason, the pointers there should not be trusted blindly.

So this patch treats all data in __dump_page() that depends on
page->mapping as lava, using probe_kernel_read_strict().  Ideally this
would include the dentry->d_parent recursively, but that would mean
changing printk handler for %pd.  Chances of reaching the dentry
printing part with an initially bogus mapping pointer should be rather
low, though.

Also prefix printing mapping->a_ops with a description of what is being
printed.  In case the value is bogus, %ps will print raw value instead
of the symbol name and then it's not obvious at all that it's printing
a_ops.
Reported-by: Petr Tesarik <ptesarik@suse.cz>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Link: http://lkml.kernel.org/r/20200331165454.12263-1-vbabka@suse.czSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

"toggle" means to change a boolean thing's state.  This operation
doesn't do that - it sets it to "true".
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Rafael Aquini <aquini@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There is no need to copy SLUB_STATS items from root memcg cache to new
memcg cache copies.  Doing so could result in stack overruns because the
store function only accepts 0 to clear the stat and returns an error for
everything else while the show method would print out the whole stat.

Then, the mismatch of the lengths returns from show and store methods
happens in memcg_propagate_slab_attrs():

	else if (root_cache->max_attr_size < ARRAY_SIZE(mbuf))
		buf = mbuf;

max_attr_size is only 2 from slab_attr_store(), then, it uses mbuf[64]
in show_stat() later where a bounch of sprintf() would overrun the stack
variable.  Fix it by always allocating a page of buffer to be used in
show_stat() if SLUB_STATS=y which should only be used for debug purpose.

  # echo 1 > /sys/kernel/slab/fs_cache/shrink
  BUG: KASAN: stack-out-of-bounds in number+0x421/0x6e0
  Write of size 1 at addr ffffc900256cfde0 by task kworker/76:0/53251

  Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019
  Workqueue: memcg_kmem_cache memcg_kmem_cache_create_func
  Call Trace:
    number+0x421/0x6e0
    vsnprintf+0x451/0x8e0
    sprintf+0x9e/0xd0
    show_stat+0x124/0x1d0
    alloc_slowpath_show+0x13/0x20
    __kmem_cache_create+0x47a/0x6b0

  addr ffffc900256cfde0 is located in stack of task kworker/76:0/53251 at offset 0 in frame:
   process_one_work+0x0/0xb90

  this frame has 1 object:
   [32, 72) 'lockdep_map'

  Memory state around the buggy address:
   ffffc900256cfc80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   ffffc900256cfd00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  >ffffc900256cfd80: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1
                                                         ^
   ffffc900256cfe00: 00 00 00 00 00 f2 f2 f2 00 00 00 00 00 00 00 00
   ffffc900256cfe80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  ==================================================================
  Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: __kmem_cache_create+0x6ac/0x6b0
  Workqueue: memcg_kmem_cache memcg_kmem_cache_create_func
  Call Trace:
    __kmem_cache_create+0x6ac/0x6b0

Fixes: 107dab5c ("slub: slub-specific propagation changes")
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Glauber Costa <glauber@scylladb.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: http://lkml.kernel.org/r/20200429222356.4322-1-cai@lca.pwSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

list_slab_objects() is called when a slab is destroyed and there are
objects still left to list the objects in the syslog.  This is a pretty
rare event.

And there it seems we take the list_lock and call kmalloc while holding
that lock.

Perform the allocation in free_partial() before the list_lock is taken.

Fixes: bbd7d57b ("slub: Potential stack overflow")
Signed-off-by: Christopher Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Yu Zhao <yuzhao@google.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.2002031721250.1668@www.lameter.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I came across some unnecessary uevents once again which reminded me
this.  The patch seems to be lost in the leaves of the original
discussion [1], so resending.

[1] https://lore.kernel.org/r/alpine.DEB.2.21.2001281813130.745@www.lameter.com

Kmem caches are internal kernel structures so it is strange that
userspace notifiers would be needed.  And I am not aware of any use of
these notifiers.  These notifiers may just exist because in the initial
slub release the sysfs code was copied from another subsystem.
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Koutný <mkoutny@suse.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: http://lkml.kernel.org/r/20200423115721.19821-1-mkoutny@suse.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The slub_debug is able to fix the corrupted slab freelist/page.
However, alloc_debug_processing() only checks the validity of current
and next freepointer during allocation path.  As a result, once some
objects have their freepointers corrupted, deactivate_slab() may lead to
page fault.

Below is from a test kernel module when 'slub_debug=PUF,kmalloc-128
slub_nomerge'.  The test kernel corrupts the freepointer of one free
object on purpose.  Unfortunately, deactivate_slab() does not detect it
when iterating the freechain.

  BUG: unable to handle page fault for address: 00000000123456f8
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 0 P4D 0
  Oops: 0000 [#1] SMP PTI
  ... ...
  RIP: 0010:deactivate_slab.isra.92+0xed/0x490
  ... ...
  Call Trace:
   ___slab_alloc+0x536/0x570
   __slab_alloc+0x17/0x30
   __kmalloc+0x1d9/0x200
   ext4_htree_store_dirent+0x30/0xf0
   htree_dirblock_to_tree+0xcb/0x1c0
   ext4_htree_fill_tree+0x1bc/0x2d0
   ext4_readdir+0x54f/0x920
   iterate_dir+0x88/0x190
   __x64_sys_getdents+0xa6/0x140
   do_syscall_64+0x49/0x170
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

Therefore, this patch adds extra consistency check in deactivate_slab().
Once an object's freepointer is corrupted, all following objects
starting at this object are isolated.

[akpm@linux-foundation.org: fix build with CONFIG_SLAB_DEBUG=n]
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joe Jin <joe.jin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: http://lkml.kernel.org/r/20200331031450.12182-1-dongli.zhang@oracle.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We have seen a "usercopy: Kernel memory overwrite attempt detected to
SLUB object 'dma-kmalloc-1 k' (offset 0, size 11)!" error on s390x, as
IUCV uses kmalloc() with __GFP_DMA because of memory address
restrictions.  The issue has been discussed [2] and it has been noted
that if all the kmalloc caches are marked as usercopy, there's little
reason not to mark dma-kmalloc caches too.  The 'dma' part merely means
that __GFP_DMA is used to restrict memory address range.

As Jann Horn put it [3]:
 "I think dma-kmalloc slabs should be handled the same way as normal
  kmalloc slabs. When a dma-kmalloc allocation is freshly created, it is
  just normal kernel memory - even if it might later be used for DMA -,
  and it should be perfectly fine to copy_from_user() into such
  allocations at that point, and to copy_to_user() out of them at the
  end. If you look at the places where such allocations are created, you
  can see things like kmemdup(), memcpy() and so on - all normal
  operations that shouldn't conceptually be different from usercopy in
  any relevant way."

Thus this patch marks the dma-kmalloc-* caches as usercopy.

[1] https://bugzilla.suse.com/show_bug.cgi?id=1156053
[2] https://lore.kernel.org/kernel-hardening/bfca96db-bbd0-d958-7732-76e36c667c68@suse.cz/
[3] https://lore.kernel.org/kernel-hardening/CAG48ez1a4waGk9kB0WLaSbs4muSoK0AYAVk8=XYaKj4_+6e6Hg@mail.gmail.com/Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Jiri Slaby <jslaby@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Christopher Lameter <cl@linux.com>
Cc: Julian Wiedmann <jwi@linux.ibm.com>
Cc: Ursula Braun <ubraun@linux.ibm.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: David Windsor <dave@nullcore.net>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Dave Kleikamp <dave.kleikamp@oracle.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Luis de Bethencourt <luisbg@kernel.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Matthew Garrett <mjg59@google.com>
Cc: Michal Kubecek <mkubecek@suse.cz>
Link: http://lkml.kernel.org/r/7d810f6d-8085-ea2f-7805-47ba3842dc50@suse.czSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When syncing out a block device (a'la __sync_blockdev), any error
encountered will only be recorded in the bd_inode's mapping.  When the
blockdev contains a filesystem however, we'd like to also record the
error in the super_block that's stored there.

Make mark_buffer_write_io_error also record the error in the
corresponding super_block when a writeback error occurs and the block
device contains a mounted superblock.

Since superblocks are RCU freed, hold the rcu_read_lock to ensure that
the superblock doesn't go away while we're marking it.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andres Freund <andres@anarazel.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Link: http://lkml.kernel.org/r/20200428135155.19223-3-jlayton@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "vfs: have syncfs() return error when there are writeback
errors", v6.

Currently, syncfs does not return errors when one of the inodes fails to
be written back.  It will return errors based on the legacy AS_EIO and
AS_ENOSPC flags when syncing out the block device fails, but that's not
particularly helpful for filesystems that aren't backed by a blockdev.
It's also possible for a stray sync to lose those errors.

The basic idea in this set is to track writeback errors at the
superblock level, so that we can quickly and easily check whether
something bad happened without having to fsync each file individually.
syncfs is then changed to reliably report writeback errors after they
occur, much in the same fashion as fsync does now.

This patch (of 2):

Usually we suggest that applications call fsync when they want to ensure
that all data written to the file has made it to the backing store, but
that can be inefficient when there are a lot of open files.

Calling syncfs on the filesystem can be more efficient in some
situations, but the error reporting doesn't currently work the way most
people expect.  If a single inode on a filesystem reports a writeback
error, syncfs won't necessarily return an error.  syncfs only returns an
error if __sync_blockdev fails, and on some filesystems that's a no-op.

It would be better if syncfs reported an error if there were any
writeback failures.  Then applications could call syncfs to see if there
are any errors on any open files, and could then call fsync on all of
the other descriptors to figure out which one failed.

This patch adds a new errseq_t to struct super_block, and has
mapping_set_error also record writeback errors there.

To report those errors, we also need to keep an errseq_t in struct file
to act as a cursor.  This patch adds a dedicated field for that purpose,
which slots nicely into 4 bytes of padding at the end of struct file on
x86_64.

An earlier version of this patch used an O_PATH file descriptor to cue
the kernel that the open file should track the superblock error and not
the inode's writeback error.

I think that API is just too weird though.  This is simpler and should
make syncfs error reporting "just work" even if someone is multiplexing
fsync and syncfs on the same fds.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Andres Freund <andres@anarazel.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: David Howells <dhowells@redhat.com>
Link: http://lkml.kernel.org/r/20200428135155.19223-1-jlayton@kernel.org
Link: http://lkml.kernel.org/r/20200428135155.19223-2-jlayton@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

parisc's set_pte_at() macro has set-but-not-used variable:

  include/linux/pgtable.h: In function 'pte_clear_not_present_full':
  arch/parisc/include/asm/pgtable.h:96:9: warning: variable 'old_pte' set but not used [-Wunused-but-set-variable]
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Usually we create and use a ocfs2 shared volume on the top of ha stack.
For pcmk based ha stack, which includes DLM, corosync and pacemaker
services.

The customers complained they could not mount existent ocfs2 volume in
the single node without ha stack, e.g.  single node backup/restore
scenario.

Like this case, the customers just want to access the data from the
existent ocfs2 volume quickly, but do not want to restart or setup ha
stack.

Then, I'd like to add a mount option "nocluster", if the users use this
option to mount a ocfs2 shared volume, the whole mount will not depend
on the ha related services.  the command will mount the existent ocfs2
volume directly (like local mount), for avoiding setup the ha stack.
Signed-off-by: Gang He <ghe@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Link: http://lkml.kernel.org/r/20200423053300.22661-1-ghe@suse.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Sparse reports a warning at dlm_empty_lockres()

  warning: context imbalance in dlm_purge_lockres() - unexpected unlock

The root cause is the missing annotation at dlm_purge_lockres()

Add the missing __must_hold(&dlm->spinlock)
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Link: http://lkml.kernel.org/r/20200403160505.2832-4-jbi.octave@gmail.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ll_rw_block() function has been deprecated in favor of BIO which appears
to come with large performance improvements.

This patch decreases boot time by close to 40% when using squashfs for
the root file-system.  This is observed at least in the context of
starting an Android VM on Chrome OS using crosvm.  The patch was tested
on 4.19 as well as master.

This patch is largely based on Adrien Schildknecht's patch that was
originally sent as https://lkml.org/lkml/2017/9/22/814 though with some
significant changes and simplifications while also taking Phillip
Lougher's feedback into account, around preserving support for
FILE_CACHE in particular.

[akpm@linux-foundation.org: fix build error reported by Randy]
  Link: http://lkml.kernel.org/r/319997c2-5fc8-f889-2ea3-d913308a7c1f@infradead.orgSigned-off-by: Philippe Liard <pliard@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Adrien Schildknecht <adrien+dev@schischi.me>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Daniel Rosenberg <drosen@google.com>
Link: https://chromium.googlesource.com/chromiumos/platform/crosvm
Link: http://lkml.kernel.org/r/20191106074238.186023-1-pliard@google.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull x86 cache resource control updates from Borislav Petkov:
 "Add support for wider Memory Bandwidth Monitoring counters by querying
  their width from CPUID.

  As a prerequsite for that, streamline and unify the CPUID detection of
  the respective resource control attributes.

  By Reinette Chatre"

* tag 'x86_cache_updates_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/resctrl: Support wider MBM counters
  x86/resctrl: Support CPUID enumeration of MBM counter width
  x86/resctrl: Maintain MBM counter width per resource
  x86/resctrl: Query LLC monitoring properties once during boot
  x86/resctrl: Remove unnecessary RMID checks
  x86/cpu: Move resctrl CPUID code to resctrl/
  x86/resctrl: Rename asm/resctrl_sched.h to asm/resctrl.h

Pull x86 microcode update from Borislav Petkov:
 "A single fix for late microcode loading to handle the correct return
  value from stop_machine(), from Mihai Carabas"

* tag 'x86_microcode_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode: Fix return value for microcode late loading

Pull EDAC updates from Borislav Petkov:

 - Fix i10nm_edac loading on some Ice Lake and Tremont/Jacobsville
   steppings due to the offset change of the bus number configuration
   register, by Qiuxu Zhuo.

 - The usual cleanups and fixes all over the place.

* tag 'edac_updates_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/amd64: Remove redundant assignment to variable ret in hw_info_get()
  EDAC/skx: Use the mcmtr register to retrieve close_pg/bank_xor_enable
  EDAC/i10nm: Update driver to support different bus number config register offsets
  EDAC, {skx,i10nm}: Make some configurations CPU model specific
  EDAC/amd8131: Remove defined but not used bridge_str
  EDAC/thunderx: Make symbols static
  MAINTAINERS: Remove sifive_l2_cache.c from EDAC-SIFIVE pattern
  EDAC/xgene: Remove set but not used address local var
  EDAC/armada_xp: Fix some log messages

Pull printk updates from Petr Mladek:

 - Benjamin Herrenschmidt solved a problem with non-matched console
   aliases by first checking consoles defined on the command line. It is
   a more conservative approach than the previous attempts.

 - Benjamin also made sure that the console accessible via /dev/console
   always has CON_CONSDEV flag.

 - Andy Shevchenko added the %ptT modifier for printing struct time64_t.
   It extends the existing %ptR handling for struct rtc_time.

 - Bruno Meneguele fixed /dev/kmsg error value returned by unsupported
   SEEK_CUR.

 - Tetsuo Handa removed unused pr_cont_once().

... and a few small fixes.

* tag 'printk-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  printk: Remove pr_cont_once()
  printk: handle blank console arguments passed in.
  kernel/printk: add kmsg SEEK_CUR handling
  printk: Fix a typo in comment "interator"->"iterator"
  usb: pulse8-cec: Switch to use %ptT
  ARM: bcm2835: Switch to use %ptT
  lib/vsprintf: Print time64_t in human readable format
  lib/vsprintf: update comment about simple_strto<foo>() functions
  printk: Correctly set CON_CONSDEV even when preferred console was not registered
  printk: Fix preferred console selection with multiple matches
  printk: Move console matching logic into a separate function
  printk: Convert a use of sprintf to snprintf in console_unlock

Pull fsverity updates from Eric Biggers:
 "Fix kerneldoc warnings and some coding style inconsistencies.

  This mirrors the similar cleanups being done in fs/crypto/"

* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  fs-verity: remove unnecessary extern keywords
  fs-verity: fix all kerneldoc warnings

Pull fscrypt updates from Eric Biggers:

 - Add the IV_INO_LBLK_32 encryption policy flag which modifies the
   encryption to be optimized for eMMC inline encryption hardware.

 - Make the test_dummy_encryption mount option for ext4 and f2fs support
   v2 encryption policies.

 - Fix kerneldoc warnings and some coding style inconsistencies.

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  fscrypt: add support for IV_INO_LBLK_32 policies
  fscrypt: make test_dummy_encryption use v2 by default
  fscrypt: support test_dummy_encryption=v2
  fscrypt: add fscrypt_add_test_dummy_key()
  linux/parser.h: add include guards
  fscrypt: remove unnecessary extern keywords
  fscrypt: name all function parameters
  fscrypt: fix all kerneldoc warnings

Pull pstore updates from Kees Cook:
 "Fixes and new features for pstore.

  This is a pretty big set of changes (relative to past pstore pulls),
  but it has been in -next for a while. The biggest change here is the
  ability to support a block device as a pstore backend, which has been
  desired for a while. A lot of additional fixes and refactorings are
  also included, mostly in support of the new features.

   - refactor pstore locking for safer module unloading (Kees Cook)

   - remove orphaned records from pstorefs when backend unloaded (Kees
     Cook)

   - refactor dump_oops parameter into max_reason (Pavel Tatashin)

   - introduce pstore/zone for common code for contiguous storage
     (WeiXiong Liao)

   - introduce pstore/blk for block device backend (WeiXiong Liao)

   - introduce mtd backend (WeiXiong Liao)"

* tag 'pstore-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (35 commits)
  mtd: Support kmsg dumper based on pstore/blk
  pstore/blk: Introduce "best_effort" mode
  pstore/blk: Support non-block storage devices
  pstore/blk: Provide way to query pstore configuration
  pstore/zone: Provide way to skip "broken" zone for MTD devices
  Documentation: Add details for pstore/blk
  pstore/zone,blk: Add ftrace frontend support
  pstore/zone,blk: Add console frontend support
  pstore/zone,blk: Add support for pmsg frontend
  pstore/blk: Introduce backend for block devices
  pstore/zone: Introduce common layer to manage storage zones
  ramoops: Add "max-reason" optional field to ramoops DT node
  pstore/ram: Introduce max_reason and convert dump_oops
  pstore/platform: Pass max_reason to kmesg dump
  printk: Introduce kmsg_dump_reason_str()
  printk: honor the max_reason field in kmsg_dumper
  printk: Collapse shutdown types into a single dump reason
  pstore/ftrace: Provide ftrace log merging routine
  pstore/ram: Refactor ftrace buffer merging
  pstore/ram: Refactor DT size parsing
  ...

Pull crypto updates from Herbert Xu:
 "API:
   - Introduce crypto_shash_tfm_digest() and use it wherever possible.
   - Fix use-after-free and race in crypto_spawn_alg.
   - Add support for parallel and batch requests to crypto_engine.

  Algorithms:
   - Update jitter RNG for SP800-90B compliance.
   - Always use jitter RNG as seed in drbg.

  Drivers:
   - Add Arm CryptoCell driver cctrng.
   - Add support for SEV-ES to the PSP driver in ccp"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (114 commits)
  crypto: hisilicon - fix driver compatibility issue with different versions of devices
  crypto: engine - do not requeue in case of fatal error
  crypto: cavium/nitrox - Fix a typo in a comment
  crypto: hisilicon/qm - change debugfs file name from qm_regs to regs
  crypto: hisilicon/qm - add DebugFS for xQC and xQE dump
  crypto: hisilicon/zip - add debugfs for Hisilicon ZIP
  crypto: hisilicon/hpre - add debugfs for Hisilicon HPRE
  crypto: hisilicon/sec2 - add debugfs for Hisilicon SEC
  crypto: hisilicon/qm - add debugfs to the QM state machine
  crypto: hisilicon/qm - add debugfs for QM
  crypto: stm32/crc32 - protect from concurrent accesses
  crypto: stm32/crc32 - don't sleep in runtime pm
  crypto: stm32/crc32 - fix multi-instance
  crypto: stm32/crc32 - fix run-time self test issue.
  crypto: stm32/crc32 - fix ext4 chksum BUG_ON()
  crypto: hisilicon/zip - Use temporary sqe when doing work
  crypto: hisilicon - add device error report through abnormal irq
  crypto: hisilicon - remove codes of directly report device errors through MSI
  crypto: hisilicon - QM memory management optimization
  crypto: hisilicon - unify initial value assignment into QM
  ...

Pull i3c update from Boris Brezillon:
 "Fix GETMRL's logic"

* tag 'i3c/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c master: GETMRL's 3rd byte is optional even with BCR_IBI_PAYLOAD

Pull regulator updates from Mark Brown:
 "The big change in this release is that Matti Vaittinen has factored
  out the linear ranges support into a separate library in lib/ since it
  is also useful for at least the power subsystem (and most likely
  others too), it helps subsystems which need to map register values
  into more useful real world values do so with minimal per-driver code.

   - Factoring out of the linear ranges support into a library in lib/
     from Matti Vaittinen.

   - Trace points for bypass mode.

   - Use the consumer name in debugfs to make it easier to understand.

   - New drivers for Maxim MAX77826 and MAX8998"

* tag 'regulator-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (23 commits)
  regulator: max8998: max8998_set_current_limit() can be static
  dt-bindings: regulator: Convert anatop regulator to json-schema
  regulator: core: Add regulator bypass trace points
  regulator: extract voltage balancing code to the separate function
  regulator/mfd: max8998: Document charger regulator
  regulator: max8998: Add charger regulator
  MAINTAINERS: Add maintainer entry for linear ranges helper
  regulator: bd718x7: remove voltage change restriction from BD71847 LDOs
  lib: linear_ranges: Add missing MODULE_LICENSE()
  regulator: use linear_ranges helper
  power: supply: bd70528: rename linear_range to avoid collision
  lib/test_linear_ranges: add a test for the 'linear_ranges'
  lib: add linear ranges helpers
  regulator: db8500-prcmu: Use true,false for bool variable
  regulator: bd718x7: remove voltage change restriction from BD71847
  regulator: max77826: Remove erroneous additionalProperties
  regulator: qcom-rpmh: Fix typos in pm8150 and pm8150l
  regulator: Document bindings for max77826
  regulator: max77826: Add max77826 regulator driver
  regulator: tps80031: remove redundant assignment to variables ret and val
  ...

Pull spi updates from Mark Brown:
 "This has been a very active release for the DesignWare driver in
  particular - after a long period of inactivity we have had a lot of
  people actively working on it for unrelated reasons this cycle with
  some of that work still not landed.

  Otherwise it's been fairly quiet for the subsystem.

  Highlights include:

   - Lots of performance improvements and fixes for the DesignWare
     driver from Serge Semin, Andy Shevchenko, Wan Ahmad Zainie, Clement
     Leger, Dinh Nguyen and Jarkko Nikula.

   - Support for octal mode transfers in spidev.

   - Slave mode support for the Rockchip drivers.

   - Support for AMD controllers, Broadcom mspi and Raspberry Pi 4, and
     Intel Elkhart Lake"

* tag 'spi-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (125 commits)
  spi: spi-fsl-dspi: fix native data copy
  spi: Convert DW SPI binding to DT schema
  spi: dw: Refactor mid_spi_dma_setup() to separate DMA and IRQ config
  spi: dw: Make DMA request line assignments explicit for Intel Medfield
  spi: bcm2835: Remove shared interrupt support
  dt-bindings: snps,dw-apb-ssi: add optional reset property
  spi: dw: add reset control
  spi: bcm2835: Enable shared interrupt support
  spi: bcm2835: Implement shutdown callback
  spi: dw: Use regset32 DebugFS method to create regdump file
  spi: dw: Add DMA support to the DW SPI MMIO driver
  spi: dw: Cleanup generic DW DMA code namings
  spi: dw: Add DW SPI DMA/PCI/MMIO dependency on the DW SPI core
  spi: dw: Remove DW DMA code dependency from DW_DMAC_PCI
  spi: dw: Move Non-DMA code to the DW PCIe-SPI driver
  spi: dw: Add core suffix to the DW APB SSI core source file
  spi: dw: Fix Rx-only DMA transfers
  spi: dw: Use DMA max burst to set the request thresholds
  spi: dw: Parameterize the DMA Rx/Tx burst length
  spi: dw: Add SPI Rx-done wait method to DMA-based transfer
  ...

Pull regmap updates from Mark Brown:
 "This has been a very active release for the regmap API for some
  reason, a lot of it due to new devices with odd requirements that can
  sensibly be handled here.

   - Add support for buses implementing a custom reg_update_bits()
     method in case the bus has a native operation for this.

   - Support 16 bit register addresses in SMBus.

   - Allow customization of the device attached to regmap-irq.

   - Helpers for bitfield operations and per-port field initializations"

* tag 'regmap-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: provide helpers for simple bit operations
  regmap: add helper for per-port regfield initialization
  regmap-i2c: add 16-bit width registers support
  regmap: Simplify implementation of the regmap_field_read_poll_timeout() macro
  regmap: Simplify implementation of the regmap_read_poll_timeout() macro
  regmap: add reg_sequence helpers
  regmap-irq: make it possible to add irq_chip do a specific device node
  regmap: Add bus reg_update_bits() support
  regmap: debugfs: check count when read regmap file

Pull hwmon updates from Guenter Roeck:
 "Infrastructure:
   - Add notification support

  New drivers:
   - Baikal-T1 PVT sensor driver
   - amd_energy driver to report energy counters
   - Driver for Maxim MAX16601
   - Gateworks System Controller

  Various:
   - applesmc: avoid overlong udelay()
   - dell-smm: Use one DMI match for all XPS models
   - ina2xx: Implement alert functions
   - lm70: Add support for ACPI
   - lm75: Fix coding-style warnings
   - lm90: Add max6654 support to lm90 driver
   - nct7802: Replace container_of() API
   - nct7904: Set default timeout
   - nct7904: Add watchdog function
   - pmbus: Improve initialization of 'currpage' and 'currphase'"

* tag 'hwmon-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (24 commits)
  hwmon: Add Baikal-T1 PVT sensor driver
  hwmon: Add notification support
  dt-bindings: hwmon: Add Baikal-T1 PVT sensor binding
  hwmon: (applesmc) avoid overlong udelay()
  hwmon: (nct7904) Set default timeout
  hwmon: (amd_energy) Missing platform_driver_unregister() on error in amd_energy_init()
  MAINTAINERS: add entry for AMD energy driver
  hwmon: (amd_energy) Add documentation
  hwmon: Add amd_energy driver to report energy counters
  hwmon: (nct7802) Replace container_of() API
  hwmon: (lm90) Add max6654 support to lm90 driver
  hwmon : (nct6775) Use kobj_to_dev() API
  hwmon: (pmbus) Driver for Maxim MAX16601
  hwmon: (pmbus) Improve initialization of 'currpage' and 'currphase'
  hwmon: (adt7411) update contact email
  hwmon: (lm75) Fix all coding-style warnings on lm75 driver
  hwmon: Reduce indentation level in __hwmon_device_register()
  hwmon: (ina2xx) Implement alert functions
  hwmon: (lm70) Add support for ACPI
  hwmon: (dell-smm) Use one DMI match for all XPS models
  ...

Pull tpm updates from Jarkko Sakkinen.

* tag 'tpmdd-next-20200522' of git://git.infradead.org/users/jjs/linux-tpmdd:
  tpm: eventlog: Replace zero-length array with flexible-array member
  tpm/tpm_ftpm_tee: Use UUID API for exporting the UUID

Fixes: 4ffea5e0 ("regulator: max8998: Add charger regulator")
Signed-off-by: kbuild test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20200530130314.GA73557@d7d8dbfb64ffSigned-off-by: Mark Brown <broonie@kernel.org>

Signed-off-by: Borislav Petkov <bp@suse.de>