- 18 Apr, 2013 3 commits
-
-
Stephen Warren authored
When building the kernel with CONFIG_THUMB2_KERNEL enabled, older assemblers may emit the following error: reset-handler.S:78: Error: invalid immediate for address calculation (value = 0x00000004) Using an explicit adr.w instruction will solve this. Newer assemblers do this automatically. Use the W() macro to do this under Thumb mode only. Inspired-by: Joseph Lo <josephl@nvidia.com> Suggested-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Joseph Lo authored
The conditional branch instruction in Thumb2 only available to short range. The linker will fail when the conditional branch over the range. Then resulting in link error when generating kernel image. e.g.: arch/arm/mach-tegra/reset-handler.S:47:(.text+0xf8e): relocation truncated to fit: R_ARM_THM_JUMP19 against symbol `cpu_resume' defined in .data section in arch/arm/kernel/built-in.o This patch using a Thumb2 instruction IT (if-then) to have a longer branch range. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Joseph Lo authored
This patch fix the build failure when CONFIG_THUBM2_KERNEL enabled. You clould see the error message below: arch/arm/mach-tegra/sleep-tegra30.S:69: Error: shift must be constant -- `orr r12,r12,r4,lsl r3' Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
-
- 15 Apr, 2013 1 commit
-
-
Olof Johansson authored
Merge tag 'msm-fix-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm into next/fixes-non-critical From David Brown: Some minor fixes for MSM for 3.10 - Fix a timer problem that causes missed ticks and hangs. - Fix a problem with the decompressor UART dropping characters. * tag 'msm-fix-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm: ARM: msm: Fix uncompess.h tx underrun check ARM: msm: Stop counting before reprogramming clockevent Signed-off-by: Olof Johansson <olof@lixom.net>
-
- 11 Apr, 2013 3 commits
-
-
Stephen Boyd authored
Bit 3 of the SR register is set if there is a tx underrun. If this bit isn't set, we should loop on the tx ready bit until we can transmit again. Otherwise we should skip the loop and transmit immediately. The code is doing the opposite though, checking for an underrun and then looping on the tx ready bit causing us to never loop on the tx read bit when the tx buffer may not be ready. This doesn't seem to affect my 8960 device too often, but in some cases I see a lost character or two from the decompressor prints. This also matches what we do in the assembly in debug-macro.S. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
-
Olof Johansson authored
Merge tag 'imx-noncritical-fixes-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/fixes-non-critical From Shawn Guo: The imx noncritical fixes for 3.10: * A bunch of fixes for sparse warings * One fix for the typo in use of Kconfig symbol MACH_EUKREA_CPUIMX27_USEUART4 * tag 'imx-noncritical-fixes-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: cpuimx27 and mbimx27: prepend CONFIG_ to Kconfig macro ARM: mach-imx: mach-imx6q: Fix sparse warnings ARM: mach-imx: src: Include "common.h ARM: mach-imx: gpc: Include "common.h" ARM: mach-imx: avic: Staticize *avic_base ARM: mach-imx: tzic: Staticize *tzic_base ARM: mach-imx: clk: Include "clk.h" ARM: mach-imx: clk-busy: Staticize clk_busy_mux_ops ARM: mach-imx: irq-common: Remove imx_irq_set_priority() ARM: mach-imx: clk-gate2: Include "clk.h" ARM: mach-imx: clk-pllv2: Staticize clk_pllv2_ops ARM: mach-imx: clk-pllv1: Staticize clk_pllv1_ops ARM: mach-imx: cpu-imx5: Include "common.h" ARM: mach-imx: iomux-imx31: Staticize mxc_pin_alloc_map ARM: mach-imx: mm-imx3: Staticize imx3_init_l2x0() ARM: mach-imx: cpu: Include "common.h" Signed-off-by: Olof Johansson <olof@lixom.net>
-
Pawel Moll authored
The ARM perf core code used to rely on the pmu node being compatible with "arm,cortex-a9-pmu", even when the PMUs of the different Cortex-A processors are not really compatible... This is no longer required and actually became harmful, so remove all the offending values from Versatile Express DTS files. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
-
- 09 Apr, 2013 1 commit
-
-
Arnd Bergmann authored
Merge tag 'tegra-for-3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/fixes-non-critical From Stephen Warren <swarren@wwwdotorg.org>: ARM: tegra: minor fixes This branch contains a variety of small build and run-time fixes that weren't important enough for 3.9. * Enable CPU errata WARs in secondary reset handler as a preparation for multi-platform support, and a related fix. * Don't touch DBLGAR in reset/resume handlers, so enable the code to run on A15 cores. * Minor build fixes. * A fix to the Tegra clock driver. * Some error-handling fixes. This branch is based on the previous fixes-for-mmc pull request. * tag 'tegra-for-3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: ARM: tegra: powergate: Don't error out if new state == old state ARM: tegra: Export tegra_powergate_sequence_power_up() memory: tegra30: Fix build error w/o PM ARM: tegra: fix ignored return value of regulator_enable ARM: tegra: fix the logical detection of power on sequence of warm boot CPUs ARM: tegra: Fix unchecked return value ARM: tegra: don't unlock MMIO access to DBGLAR clk: tegra: No 7.1 super clk dividers on Tegra20 ARM: tegra: remove save/restore of CPU diag register ARM: tegra: add CPU errata WARs to Tegra reset handler ARM: dts: tegra: fix the activate polarity of cd-gpio in mmc host Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
- 08 Apr, 2013 1 commit
-
-
Arnd Bergmann authored
Merge tag 'omap-for-v3.10/fixes-non-critical-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/fixes-non-critical From Tony Lindgren <tony@atomide.com>: Non critical omap fixes for v3.10 merge window. A big chunk of these fixes are needed to support omap5 es2 version that includes PM features while the earlier version es1 did not. * tag 'omap-for-v3.10/fixes-non-critical-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: fix typo "CONFIG_BRIDGE_DVFS" ARM: OMAP1: remove "config MACH_OMAP_HTCWIZARD" ARM: OMAP: dpll: enable bypass clock only when attempting dpll bypass ARM: OMAP2+: powerdomain: avoid testing whether an unsigned char is less than 0 ARM: OMAP2+: hwmod: Remove unused _HWMOD_WAKEUP_ENABLED flag ARM: OMAP2+: am335x: Change the wdt1 func clk src to per_32k clk ARM: OMAP2+: AM33xx: hwmod: Add missing sysc definition to wdt1 entry Contains an update to 3.9-rc5 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
- 03 Apr, 2013 1 commit
-
-
Paul Bolle authored
Commit 2d66c780 ("cpuimx27 and mbimx27: allow fine control of UART4 and SDHC2 usage") added the Kconfig symbol MACH_EUKREA_CPUIMX27_USEUART4. But it forgot to prepend CONFIG_ to the use of its macro. Add that prefix now. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
- 02 Apr, 2013 1 commit
-
-
Arnd Bergmann authored
Merge tag 'v3.9-rc1_cns3xxx_fixes' of git://git.infradead.org/users/cbou/linux-cns3xxx into next/fixes-non-critical From Anton Vorontsov <anton@enomsg.org>: This tag includes Mac Lin's work to revive CNS3xxx booting: "Since commit 0536bdf3 (ARM: move iotable mappings within the vmalloc region), [...] the pre-defined iotable mappings is not in the vmalloc region. [...] move the iotable mappings into the vmalloc region, and merge the MPCore private memory region (containing the SCU, the GIC and the TWD) as a single region." Plus there is a small cosmetic fix, also from Mac Lin. * tag 'v3.9-rc1_cns3xxx_fixes' of git://git.infradead.org/users/cbou/linux-cns3xxx: ARM: cns3xxx: remove unused virtual address and iotable defines ARM: cns3xxx: fix mapping of private memory region Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
- 01 Apr, 2013 24 commits
-
-
Tony Lindgren authored
Merge branch 'for_3.10/omap5_generic_updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux into omap-for-v3.10/fixes-non-critical
-
Tony Lindgren authored
Merge tag 'omap-devel-b-for-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.10/fixes-non-critical Some miscellaneous OMAP hwmod, powerdomain, and clock fixes for 3.10. Basic test logs are here: http://www.pwsan.com/omap/testlogs/prcm_fixes_a_3.10/20130331205716/
-
Paul Bolle authored
Commit 90173882 ("omap: add dsp platform device") used CONFIG_BRIDGE_DVFS were it obviously meant CONFIG_TIDSPBRIDGE_DVFS. Fix that. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Paul Bolle authored
The Kconfig symbol MACH_OMAP_HTCWIZARD got added in v2.6.30. It has never been used. Its entry can safely be removed. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Fabio Estevam authored
Fix the following sparse warnings: arch/arm/mach-imx/mach-imx6q.c:60:6: warning: symbol 'imx6q_restart' was not declared. Should it be static? arch/arm/mach-imx/mach-imx6q.c:223:24: warning: symbol 'imx6q_cpufreq_pdev' was not declared. Should it be static? Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Fabio Estevam authored
Fix the following sparse warnings: arch/arm/mach-imx/src.c:28:6: warning: symbol 'imx_enable_cpu' was not declared. Should it be static? arch/arm/mach-imx/src.c:39:6: warning: symbol 'imx_set_cpu_jump' was not declared. Should it be static? arch/arm/mach-imx/src.c:46:6: warning: symbol 'imx_src_prepare_restart' was not declared. Should it be static? arch/arm/mach-imx/src.c:59:13: warning: symbol 'imx_src_init' was not declared. Should it be static? Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Fabio Estevam authored
Fix the following sparse warnings: arch/arm/mach-imx/gpc.c:29:6: warning: symbol 'imx_gpc_pre_suspend' was not declared. Should it be static? arch/arm/mach-imx/gpc.c:43:6: warning: symbol 'imx_gpc_post_resume' was not declared. Should it be static? arch/arm/mach-imx/gpc.c:71:6: warning: symbol 'imx_gpc_mask_all' was not declared. Should it be static? arch/arm/mach-imx/gpc.c:83:6: warning: symbol 'imx_gpc_restore_all' was not declared. Should it be static? arch/arm/mach-imx/gpc.c:122:13: warning: symbol 'imx_gpc_init' was not declared. Should it be static? Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Fabio Estevam authored
Fix the following sparse warning: arch/arm/mach-imx/avic.c:54:14: warning: symbol 'avic_base' was not declared. Should it be static? Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Fabio Estevam authored
Fix the following sparse warning: arch/arm/mach-imx/tzic.c:52:14: warning: symbol 'tzic_base' was not declared. Should it be static? Also, remove the comment, as it does not apply for kernels newer than 3.2. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Fabio Estevam authored
Fix the following sparse warning: arch/arm/mach-imx/clk.c:3:1: warning: symbol 'imx_ccm_lock' was not declared. Should it be static? Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Fabio Estevam authored
Fix the following sparse warning: arch/arm/mach-imx/clk-busy.c:150:16: warning: symbol 'clk_busy_mux_ops' was not declared. Should it be static? Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Fabio Estevam authored
imx_irq_set_priority() is not used anywhere, so remove it. This fixes the following sparse warnings: arch/arm/mach-imx/irq-common.c:24:5: warning: symbol 'imx_irq_set_priority' was not declared. Should it be static? Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Fabio Estevam authored
Fix the following sparse warning: arch/arm/mach-imx/clk-gate2.c:86:12: warning: symbol 'clk_register_gate2' was not declared. Should it be static? Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Fabio Estevam authored
Fix the following sparse warning: rch/arm/mach-imx/clk-pllv2.c:232:16: warning: symbol 'clk_pllv2_ops' was not declared. Should it be static? Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Fabio Estevam authored
Fix the following sparse warning: arch/arm/mach-imx/clk-pllv1.c:81:16: warning: symbol 'clk_pllv1_ops' was not declared. Should it be static? Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Fabio Estevam authored
Fix the following sparse warnings: arch/arm/mach-imx/cpu-imx5.c:65:12: warning: symbol 'mx51_neon_fixup' was not declared. Should it be static? arch/arm/mach-imx/cpu-imx5.c:99:5: warning: symbol 'mx53_revision' was not declared. Should it be static? Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Fabio Estevam authored
Fix the following sparse warning: arch/arm/mach-imx/iomux-imx31.c:43:15: warning: symbol 'mxc_pin_alloc_map' was not declared. Should it be static? Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Fabio Estevam authored
Fix the following sparse warning: arch/arm/mach-imx/mm-imx3.c:85:13: warning: symbol 'imx3_init_l2x0' was not declared. Should it be static? Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Fabio Estevam authored
Fix the following sparse warnings: arch/arm/mach-imx/cpu.c:10:6: warning: symbol 'mxc_set_cpu_type' was not declared. Should it be static? arch/arm/mach-imx/cpu.c:15:6: warning: symbol 'imx_print_silicon_rev' was not declared. Should it be static? arch/arm/mach-imx/cpu.c:24:13: warning: symbol 'imx_set_aips' was not declared. Should it be static? Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Rajendra Nayak authored
omap3_noncore_dpll_set_rate() attempts an enable of bypass clk as well as ref clk for every .set_rate attempt on a noncore DPLL, regardless of whether the .set_rate results in the DPLL being locked or put in bypass. Early at boot, while some of these DPLLs are programmed and locked (using .set_rate for the DPLL), this causes an ordering issue. For instance, on OMAP5, the USB DPLL derives its bypass clk from ABE DPLL. If a .set_rate of USB DPLL which programmes the M,N and locks it is called before the one for ABE, the enable of USB bypass clk (derived from ABE DPLL) then attempts to lock the ABE DPLL and fails as the M,N values for ABE are yet to be programmed. To get rid of this ordering needs, enable bypass clk for a DPLL as part of its .set_rate only when its being put in bypass, and only enable the ref clk when its locked. Reported-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
-
Paul Walmsley authored
_pwrdm_save_clkdm_state_and_activate() tried to test one of its unsigned arguments to determine whether it was less than zero. Fix by moving the error test to the caller. Reported-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
-
Rajendra Nayak authored
_HWMOD_WAKEUP_ENABLED is currently unused across the hwmod framework. Just get rid of it, so we have one less flag to worry about. Tested-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
-
Vaibhav Hiremath authored
WDT1 module can take one of the below clocks as input functional clock - - On-Chip 32K RC Osc [default/reset] - 32K from PRCM The On-Chip 32K RC Osc clock is not an accurate clock-source as per the design/spec, so as a result, for example, timer which supposed to get expired @60Sec, but will expire somewhere ~@40Sec, which is not expected by any use-case. The solution here is to switch the input clock-source to PRCM generated 32K clock-source during boot-time itself. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Benoit Cousson <benoit.cousson@linaro.org> Cc: Paul Walmsley <paul@pwsan.com>
-
Vaibhav Hiremath authored
This patch adds sysc definitions to the wdt1 hwmod entry, which in-turn makes sure that sysc idle bit-fields are configured to valid state on enable/disable callbacks. With the recent submitted patch from Santosh Shilimkar, "ARM: OMAP2+: hwmod: Don't call _init_mpu_rt_base if no sysc" (commit: 4a98c2d89), it is required to add sysconf information to each valid hwmod entry, else device will not be come out from idle state properly and leads to below kernel crash - [2.190237] Unhandled fault: external abort on non-linefetch (0x1028) at 0xf9e35034 [2.198325] Internal error: : 1028 [#1] SMP ARM [2.203101] Modules linked in: [2.206334] CPU: 0 Not tainted (3.9.0-rc3-00059-gd114294#1) [2.212679] PC is at omap_wdt_disable.clone.5+0xc/0x60 [2.218090] LR is at omap_wdt_probe+0x184/0x1fc Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Benoit Cousson <benoit.cousson@linaro.org> Cc: Paul Walmsley <paul@pwsan.com>
-
- 31 Mar, 2013 5 commits
-
-
Linus Torvalds authored
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull slave-dmaengine fixes from Vinod Koul: "Two fixes for slave-dmaengine. The first one is for making slave_id value correct for dw_dmac and the other one fixes the endieness in DT parsing" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dw_dmac: adjust slave_id accordingly to request line base dmaengine: dw_dma: fix endianess for DT xlate function
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: "For a some fixes for Kernel 3.9: - subsystem build fix when VIDEO_DEV=y, VIDEO_V4L2=m and I2C=m - compilation fix for arm multiarch preventing IR_RX51 to be selected - regression fix at bttv crop logic - s5p-mfc/m5mols/exynos: a few fixes for cameras on exynos hardware" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] [REGRESSION] bt8xx: Fix too large height in cropcap [media] fix compilation with both V4L2 and I2C as 'm' [media] m5mols: Fix bug in stream on handler [media] s5p-fimc: Do not attempt to disable not enabled media pipeline [media] s5p-mfc: Fix encoder control 15 issue [media] s5p-mfc: Fix frame skip bug [media] s5p-fimc: send valid m2m ctx to fimc_m2m_job_finish [media] exynos-gsc: send valid m2m ctx to gsc_m2m_job_finish [media] fimc-lite: Fix the variable type to avoid possible crash [media] fimc-lite: Initialize 'step' field in fimc_lite_ctrl structure [media] ir: IR_RX51 only works on OMAP2
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Alright, this time from 10K up in the air. Collection of fixes that have been queued up since the merge window opened, hence postponed until later in the cycle. The pull request contains: - A bunch of fixes for the xen blk front/back driver. - A round of fixes for the new IBM RamSan driver, fixing various nasty issues. - Fixes for multiple drives from Wei Yongjun, bad handling of return values and wrong pointer math. - A fix for loop properly killing partitions when being detached." * tag 'for-linus-20130331' of git://git.kernel.dk/linux-block: (25 commits) mg_disk: fix error return code in mg_probe() rsxx: remove unused variable rsxx: enable error return of rsxx_eeh_save_issued_dmas() block: removes dynamic allocation on stack Block: blk-flush: Fixed indent code style cciss: fix invalid use of sizeof in cciss_find_cfgtables() loop: cleanup partitions when detaching loop device loop: fix error return code in loop_add() mtip32xx: fix error return code in mtip_pci_probe() xen-blkfront: remove frame list from blk_shadow xen-blkfront: pre-allocate pages for requests xen-blkback: don't store dev_bus_addr xen-blkfront: switch from llist to list xen-blkback: fix foreach_grant_safe to handle empty lists xen-blkfront: replace kmalloc and then memcpy with kmemdup xen-blkback: fix dispatch_rw_block_io() error path rsxx: fix missing unlock on error return in rsxx_eeh_remap_dmas() Adding in EEH support to the IBM FlashSystem 70/80 device driver block: IBM RamSan 70/80 error message bug fix. block: IBM RamSan 70/80 branding changes. ...
-
Paul Walmsley authored
This reverts commit 6aa97070. Commit 6aa97070 ("lockdep: check that no locks held at freeze time") causes problems with NFS root filesystems. The failures were noticed on OMAP2 and 3 boards during kernel init: [ BUG: swapper/0/1 still has locks held! ] 3.9.0-rc3-00344-ga937536b #1 Not tainted ------------------------------------- 1 lock held by swapper/0/1: #0: (&type->s_umount_key#13/1){+.+.+.}, at: [<c011e84c>] sget+0x248/0x574 stack backtrace: rpc_wait_bit_killable __wait_on_bit out_of_line_wait_on_bit __rpc_execute rpc_run_task rpc_call_sync nfs_proc_get_root nfs_get_root nfs_fs_mount_common nfs_try_mount nfs_fs_mount mount_fs vfs_kern_mount do_mount sys_mount do_mount_root mount_root prepare_namespace kernel_init_freeable kernel_init Although the rootfs mounts, the system is unstable. Here's a transcript from a PM test: http://www.pwsan.com/omap/testlogs/test_v3.9-rc3/20130317194234/pm/37xxevm/37xxevm_log.txt Here's what the test log should look like: http://www.pwsan.com/omap/testlogs/test_v3.8/20130218214403/pm/37xxevm/37xxevm_log.txt Mailing list discussion is here: http://lkml.org/lkml/2013/3/4/221 Deal with this for v3.9 by reverting the problem commit, until folks can figure out the right long-term course of action. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Mandeep Singh Baines <msb@chromium.org> Cc: Jeff Layton <jlayton@redhat.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: <maciej.rutecki@gmail.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ben Chan <benchan@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-