Commits · c31fe2b5095d8c84562ce90db07600f7e9f318df · Kirill Smelkov / linux

10 Aug, 2024 6 commits

net/mlx5: SD, Do not query MPIR register if no sd_group · c31fe2b5

Tariq Toukan authored Aug 08, 2024

Unconditionally calling the MPIR query on BF separate mode yields the FW
syndrome below [1]. Do not call it unless admin clearly specified the SD
group, i.e. expressing the intention of using the multi-PF netdev
feature.

This fix covers cases not covered in
commit fca3b479 ("net/mlx5: Do not query MPIR on embedded CPU function").

[1]
mlx5_cmd_out_err:808:(pid 8267): ACCESS_REG(0x805) op_mod(0x1) failed,
status bad system state(0x4), syndrome (0x685f19), err(-5)

Fixes: 678eb448 ("net/mlx5: SD, Implement basic query and instantiation")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20240808144107.2095424-2-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

c31fe2b5

Merge branch 'don-t-take-hw-uso-path-when-packets-can-t-be-checksummed-by-device' · d2438c16

Jakub Kicinski authored Aug 09, 2024

Jakub Sitnicki says:

====================
Don't take HW USO path when packets can't be checksummed by device

This series addresses a recent regression report from syzbot [1].

After enabling UDP_SEGMENT for egress devices which don't support checksum
offload [2], we need to tighten down the checks which let packets take the
HW USO path.

The fix consists of two parts:

1. don't let devices offer USO without checksum offload, and
2. force software USO fallback in presence of IPv6 extension headers.

[1] https://lore.kernel.org/all/000000000000e1609a061d5330ce@google.com/
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=10154dbded6d6a2fecaebdfda206609de0f121a9

v3: https://lore.kernel.org/r/20240807-udp-gso-egress-from-tunnel-v3-0-8828d93c5b45@cloudflare.com
v2: https://lore.kernel.org/r/20240801-udp-gso-egress-from-tunnel-v2-0-9a2af2f15d8d@cloudflare.com
v1: https://lore.kernel.org/r/20240725-udp-gso-egress-from-tunnel-v1-0-5e5530ead524@cloudflare.com
====================

Link: https://patch.msgid.link/20240808-udp-gso-egress-from-tunnel-v4-0-f5c5b4149ab9@cloudflare.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

d2438c16

selftests/net: Add coverage for UDP GSO with IPv6 extension headers · 1d2c46c1

Jakub Sitnicki authored Aug 08, 2024

After enabling UDP GSO for devices not offering checksum offload, we have
hit a regression where a bad offload warning can be triggered when sending
a datagram with IPv6 extension headers.

Extend the UDP GSO IPv6 tests to cover this scenario.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://patch.msgid.link/20240808-udp-gso-egress-from-tunnel-v4-3-f5c5b4149ab9@cloudflare.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

1d2c46c1

udp: Fall back to software USO if IPv6 extension headers are present · 30b03f2a

Jakub Sitnicki authored Aug 08, 2024

In commit 10154dbd ("udp: Allow GSO transmit from devices with no
checksum offload") we have intentionally allowed UDP GSO packets marked
CHECKSUM_NONE to pass to the GSO stack, so that they can be segmented and
checksummed by a software fallback when the egress device lacks these
features.

What was not taken into consideration is that a CHECKSUM_NONE skb can be
handed over to the GSO stack also when the egress device advertises the
tx-udp-segmentation / NETIF_F_GSO_UDP_L4 feature.

This will happen when there are IPv6 extension headers present, which we
check for in __ip6_append_data(). Syzbot has discovered this scenario,
producing a warning as below:

  ip6tnl0: caps=(0x00000006401d7869, 0x00000006401d7869)
  WARNING: CPU: 0 PID: 5112 at net/core/dev.c:3293 skb_warn_bad_offload+0x166/0x1a0 net/core/dev.c:3291
  Modules linked in:
  CPU: 0 PID: 5112 Comm: syz-executor391 Not tainted 6.10.0-rc7-syzkaller-01603-g80ab5445 #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024
  RIP: 0010:skb_warn_bad_offload+0x166/0x1a0 net/core/dev.c:3291
  [...]
  Call Trace:
   <TASK>
   __skb_gso_segment+0x3be/0x4c0 net/core/gso.c:127
   skb_gso_segment include/net/gso.h:83 [inline]
   validate_xmit_skb+0x585/0x1120 net/core/dev.c:3661
   __dev_queue_xmit+0x17a4/0x3e90 net/core/dev.c:4415
   neigh_output include/net/neighbour.h:542 [inline]
   ip6_finish_output2+0xffa/0x1680 net/ipv6/ip6_output.c:137
   ip6_finish_output+0x41e/0x810 net/ipv6/ip6_output.c:222
   ip6_send_skb+0x112/0x230 net/ipv6/ip6_output.c:1958
   udp_v6_send_skb+0xbf5/0x1870 net/ipv6/udp.c:1292
   udpv6_sendmsg+0x23b3/0x3270 net/ipv6/udp.c:1588
   sock_sendmsg_nosec net/socket.c:730 [inline]
   __sock_sendmsg+0xef/0x270 net/socket.c:745
   ____sys_sendmsg+0x525/0x7d0 net/socket.c:2585
   ___sys_sendmsg net/socket.c:2639 [inline]
   __sys_sendmmsg+0x3b2/0x740 net/socket.c:2725
   __do_sys_sendmmsg net/socket.c:2754 [inline]
   __se_sys_sendmmsg net/socket.c:2751 [inline]
   __x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2751
   do_syscall_x64 arch/x86/entry/common.c:52 [inline]
   do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
   entry_SYSCALL_64_after_hwframe+0x77/0x7f
   [...]
   </TASK>

We are hitting the bad offload warning because when an egress device is
capable of handling segmentation offload requested by
skb_shinfo(skb)->gso_type, the chain of gso_segment callbacks won't produce
any segment skbs and return NULL. See the skb_gso_ok() branch in
{__udp,tcp,sctp}_gso_segment helpers.

To fix it, force a fallback to software USO when processing a packet with
IPv6 extension headers, since we don't know if these can checksummed by
all devices which offer USO.

Fixes: 10154dbd ("udp: Allow GSO transmit from devices with no checksum offload")
Reported-by: syzbot+e15b7e15b8a751a91d9a@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000e1609a061d5330ce@google.com/Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://patch.msgid.link/20240808-udp-gso-egress-from-tunnel-v4-2-f5c5b4149ab9@cloudflare.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

30b03f2a

net: Make USO depend on CSUM offload · 2b2bc3ba

Jakub Sitnicki authored Aug 08, 2024

UDP segmentation offload inherently depends on checksum offload. It should
not be possible to disable checksum offload while leaving USO enabled.
Enforce this dependency in code.

There is a single tx-udp-segmentation feature flag to indicate support for
both IPv4/6, hence the devices wishing to support USO must offer checksum
offload for both IP versions.

Fixes: 10154dbd ("udp: Allow GSO transmit from devices with no checksum offload")
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240808-udp-gso-egress-from-tunnel-v4-1-f5c5b4149ab9@cloudflare.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

2b2bc3ba

gtp: pull network headers in gtp_dev_xmit() · 3a3be7ff

Eric Dumazet authored Aug 08, 2024

syzbot/KMSAN reported use of uninit-value in get_dev_xmit() [1]

We must make sure the IPv4 or Ipv6 header is pulled in skb->head
before accessing fields in them.

Use pskb_inet_may_pull() to fix this issue.

[1]
BUG: KMSAN: uninit-value in ipv6_pdp_find drivers/net/gtp.c:220 [inline]
 BUG: KMSAN: uninit-value in gtp_build_skb_ip6 drivers/net/gtp.c:1229 [inline]
 BUG: KMSAN: uninit-value in gtp_dev_xmit+0x1424/0x2540 drivers/net/gtp.c:1281
  ipv6_pdp_find drivers/net/gtp.c:220 [inline]
  gtp_build_skb_ip6 drivers/net/gtp.c:1229 [inline]
  gtp_dev_xmit+0x1424/0x2540 drivers/net/gtp.c:1281
  __netdev_start_xmit include/linux/netdevice.h:4913 [inline]
  netdev_start_xmit include/linux/netdevice.h:4922 [inline]
  xmit_one net/core/dev.c:3580 [inline]
  dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3596
  __dev_queue_xmit+0x358c/0x5610 net/core/dev.c:4423
  dev_queue_xmit include/linux/netdevice.h:3105 [inline]
  packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276
  packet_snd net/packet/af_packet.c:3145 [inline]
  packet_sendmsg+0x90e3/0xa3a0 net/packet/af_packet.c:3177
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x30f/0x380 net/socket.c:745
  __sys_sendto+0x685/0x830 net/socket.c:2204
  __do_sys_sendto net/socket.c:2216 [inline]
  __se_sys_sendto net/socket.c:2212 [inline]
  __x64_sys_sendto+0x125/0x1d0 net/socket.c:2212
  x64_sys_call+0x3799/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:45
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Uninit was created at:
  slab_post_alloc_hook mm/slub.c:3994 [inline]
  slab_alloc_node mm/slub.c:4037 [inline]
  kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4080
  kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:583
  __alloc_skb+0x363/0x7b0 net/core/skbuff.c:674
  alloc_skb include/linux/skbuff.h:1320 [inline]
  alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6526
  sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2815
  packet_alloc_skb net/packet/af_packet.c:2994 [inline]
  packet_snd net/packet/af_packet.c:3088 [inline]
  packet_sendmsg+0x749c/0xa3a0 net/packet/af_packet.c:3177
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x30f/0x380 net/socket.c:745
  __sys_sendto+0x685/0x830 net/socket.c:2204
  __do_sys_sendto net/socket.c:2216 [inline]
  __se_sys_sendto net/socket.c:2212 [inline]
  __x64_sys_sendto+0x125/0x1d0 net/socket.c:2212
  x64_sys_call+0x3799/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:45
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

CPU: 0 UID: 0 PID: 7115 Comm: syz.1.515 Not tainted 6.11.0-rc1-syzkaller-00043-g94ede2a3 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024

Fixes: 999cb275 ("gtp: add IPv6 support")
Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Harald Welte <laforge@gnumonks.org>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://patch.msgid.link/20240808132455.3413916-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

3a3be7ff

09 Aug, 2024 5 commits

usbnet: ipheth: fix carrier detection in modes 1 and 4 · 67927a1b

Foster Snowhill authored Aug 06, 2024

Apart from the standard "configurations", "interfaces" and "alternate
interface settings" in USB, iOS devices also have a notion of
"modes". In different modes, the device exposes a different set of
available configurations.

Depending on the iOS version, and depending on the current mode, the
length and contents of the carrier state control message differs:

* 1 byte (seen on iOS 4.2.1, 8.4):
    * 03: carrier off (mode 0)
    * 04: carrier on (mode 0)
* 3 bytes (seen on iOS 10.3.4, 15.7.6):
    * 03 03 03: carrier off (mode 0)
    * 04 04 03: carrier on (mode 0)
* 4 bytes (seen on iOS 16.5, 17.6):
    * 03 03 03 00: carrier off (mode 0)
    * 04 03 03 00: carrier off (mode 1)
    * 06 03 03 00: carrier off (mode 4)
    * 04 04 03 04: carrier on (mode 0 and 1)
    * 06 04 03 04: carrier on (mode 4)

Before this change, the driver always used the first byte of the
response to determine carrier state.

From this larger sample, the first byte seems to indicate the number of
available USB configurations in the current mode (with the exception of
the default mode 0), and in some cases (namely mode 1 and 4) does not
correlate with the carrier state.

Previous logic erroneously counted `04 03 03 00` as "carrier on" and
`06 04 03 04` as "carrier off" on iOS versions that support mode 1 and
mode 4 respectively.

Only modes 0, 1 and 4 expose the USB Ethernet interfaces necessary for
the ipheth driver.

Check the second byte of the control message where possible, and fall
back to checking the first byte on older iOS versions.
Signed-off-by: Foster Snowhill <forst@pen.gy>
Tested-by: Georgi Valkov <gvalkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

67927a1b

usbnet: ipheth: do not stop RX on failing RX callback · 74efed51

Foster Snowhill authored Aug 06, 2024

RX callbacks can fail for multiple reasons:

* Payload too short
* Payload formatted incorrecly (e.g. bad NCM framing)
* Lack of memory

None of these should cause the driver to seize up.

Make such failures non-critical and continue processing further
incoming URBs.
Signed-off-by: Foster Snowhill <forst@pen.gy>
Signed-off-by: David S. Miller <davem@davemloft.net>

74efed51

usbnet: ipheth: drop RX URBs with no payload · 94d7eeb6

Foster Snowhill authored Aug 06, 2024

On iPhone 15 Pro Max one can observe periodic URBs with no payload
on the "bulk in" (RX) endpoint. These don't seem to do anything
meaningful. Reproduced on iOS 17.5.1 and 17.6.

This behaviour isn't observed on iPhone 11 on the same iOS version. The
nature of these zero-length URBs is so far unknown.

Drop RX URBs with no payload.
Signed-off-by: Foster Snowhill <forst@pen.gy>
Signed-off-by: David S. Miller <davem@davemloft.net>

94d7eeb6

usbnet: ipheth: remove extraneous rx URB length check · 655b46d7

Foster Snowhill authored Aug 06, 2024

Rx URB length was already checked in ipheth_rcvbulk_callback_legacy()
and ipheth_rcvbulk_callback_ncm(), depending on the current mode.
The check in ipheth_rcvbulk_callback() was thus mostly a duplicate.

The only place in ipheth_rcvbulk_callback() where we care about the URB
length is for the initial control frame. These frames are always 4 bytes
long. This has been checked as far back as iOS 4.2.1 on iPhone 3G.

Remove the extraneous URB length check. For control frames, check for
the specific 4-byte length instead.
Signed-off-by: Foster Snowhill <forst@pen.gy>
Tested-by: Georgi Valkov <gvalkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

655b46d7

usbnet: ipheth: race between ipheth_close and error handling · e5876b08

Oliver Neukum authored Aug 06, 2024

ipheth_sndbulk_callback() can submit carrier_work
as a part of its error handling. That means that
the driver must make sure that the work is cancelled
after it has made sure that no more URB can terminate
with an error condition.

Hence the order of actions in ipheth_close() needs
to be inverted.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Foster Snowhill <forst@pen.gy>
Tested-by: Georgi Valkov <gvalkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

e5876b08

08 Aug, 2024 29 commits

Merge tag 'net-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · ee9a43b7

Linus Torvalds authored Aug 08, 2024

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bluetooth.

  Current release - regressions:

   - eth: bnxt_en: fix memory out-of-bounds in bnxt_fill_hw_rss_tbl() on
     older chips

  Current release - new code bugs:

   - ethtool: fix off-by-one error / kdoc contradicting the code for max
     RSS context IDs

   - Bluetooth: hci_qca:
      - QCA6390: fix support on non-DT platforms
      - QCA6390: don't call pwrseq_power_off() twice
      - fix a NULL-pointer derefence at shutdown

   - eth: ice: fix incorrect assigns of FEC counters

  Previous releases - regressions:

   - mptcp: fix handling endpoints with both 'signal' and 'subflow'
     flags set

   - virtio-net: fix changing ring count when vq IRQ coalescing not
     supported

   - eth: gve: fix use of netif_carrier_ok() during reconfig / reset

  Previous releases - always broken:

   - eth: idpf: fix bugs in queue re-allocation on reconfig / reset

   - ethtool: fix context creation with no parameters

  Misc:

   - linkwatch: use system_unbound_wq to ease RTNL contention"

* tag 'net-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (41 commits)
  net: dsa: microchip: disable EEE for KSZ8567/KSZ9567/KSZ9896/KSZ9897.
  ethtool: Fix context creation with no parameters
  net: ethtool: fix off-by-one error in max RSS context IDs
  net: pse-pd: tps23881: include missing bitfield.h header
  net: fec: Stop PPS on driver remove
  net: bcmgenet: Properly overlay PHY and MAC Wake-on-LAN capabilities
  l2tp: fix lockdep splat
  net: stmmac: dwmac4: fix PCS duplex mode decode
  idpf: fix UAFs when destroying the queues
  idpf: fix memleak in vport interrupt configuration
  idpf: fix memory leaks and crashes while performing a soft reset
  bnxt_en : Fix memory out-of-bounds in bnxt_fill_hw_rss_tbl()
  net: dsa: bcm_sf2: Fix a possible memory leak in bcm_sf2_mdio_register()
  net/smc: add the max value of fallback reason count
  Bluetooth: hci_sync: avoid dup filtering when passive scanning with adv monitor
  Bluetooth: l2cap: always unlock channel in l2cap_conless_channel()
  Bluetooth: hci_qca: fix a NULL-pointer derefence at shutdown
  Bluetooth: hci_qca: fix QCA6390 support on non-DT platforms
  Bluetooth: hci_qca: don't call pwrseq_power_off() twice for QCA6390
  ice: Fix incorrect assigns of FEC counts
  ...

ee9a43b7

Merge tag 'trace-v6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace · 9466b6ae

Linus Torvalds authored Aug 08, 2024

Pull tracing fixes from Steven Rostedt:

 - Have reading of event format files test if the metadata still exists.

   When a event is freed, a flag (EVENT_FILE_FL_FREED) in the metadata
   is set to state that it is to prevent any new references to it from
   happening while waiting for existing references to close. When the
   last reference closes, the metadata is freed. But the "format" was
   missing a check to this flag (along with some other files) that
   allowed new references to happen, and a use-after-free bug to occur.

 - Have the trace event meta data use the refcount infrastructure
   instead of relying on its own atomic counters.

 - Have tracefs inodes use alloc_inode_sb() for allocation instead of
   using kmem_cache_alloc() directly.

 - Have eventfs_create_dir() return an ERR_PTR instead of NULL as the
   callers expect a real object or an ERR_PTR.

 - Have release_ei() use call_srcu() and not call_rcu() as all the
   protection is on SRCU and not RCU.

 - Fix ftrace_graph_ret_addr() to use the task passed in and not
   current.

 - Fix overflow bug in get_free_elt() where the counter can overflow the
   integer and cause an infinite loop.

 - Remove unused function ring_buffer_nr_pages()

 - Have tracefs freeing use the inode RCU infrastructure instead of
   creating its own.

   When the kernel had randomize structure fields enabled, the rcu field
   of the tracefs_inode was overlapping the rcu field of the inode
   structure, and corrupting it. Instead, use the destroy_inode()
   callback to do the initial cleanup of the code, and then have
   free_inode() free it.

* tag 'trace-v6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracefs: Use generic inode RCU for synchronizing freeing
  ring-buffer: Remove unused function ring_buffer_nr_pages()
  tracing: Fix overflow in get_free_elt()
  function_graph: Fix the ret_stack used by ftrace_graph_ret_addr()
  eventfs: Use SRCU for freeing eventfs_inodes
  eventfs: Don't return NULL in eventfs_create_dir()
  tracefs: Fix inode allocation
  tracing: Use refcount for trace_event_file reference counter
  tracing: Have format file honor EVENT_FILE_FL_FREED

9466b6ae

Merge tag 'bcachefs-2024-08-08' of git://evilpiepirate.org/bcachefs · b3f5620f

Linus Torvalds authored Aug 08, 2024

Pull bcachefs fixes from Kent Overstreet:
 "Assorted little stuff:

   - lockdep fixup for lockdep_set_notrack_class()

   - we can now remove a device when using erasure coding without
     deadlocking, though we still hit other issues

   - the 'allocator stuck' timeout is now configurable, and messages are
     ratelimited. The default timeout has been increased from 10 seconds
     to 30"

* tag 'bcachefs-2024-08-08' of git://evilpiepirate.org/bcachefs:
  bcachefs: Use bch2_wait_on_allocator() in btree node alloc path
  bcachefs: Make allocator stuck timeout configurable, ratelimit messages
  bcachefs: Add missing path_traverse() to btree_iter_next_node()
  bcachefs: ec should not allocate from ro devs
  bcachefs: Improved allocator debugging for ec
  bcachefs: Add missing bch2_trans_begin() call
  bcachefs: Add a comment for bucket helper types
  bcachefs: Don't rely on implicit unsigned -> signed integer conversion
  lockdep: Fix lockdep_set_notrack_class() for CONFIG_LOCK_STAT
  bcachefs: Fix double free of ca->buckets_nouse

b3f5620f

module: warn about excessively long module waits · cb5b81bc

Linus Torvalds authored Aug 08, 2024

Russell King reported that the arm cbc(aes) crypto module hangs when
loaded, and Herbert Xu bisected it to commit 9b9879fc ("modules:
catch concurrent module loads, treat them as idempotent"), and noted:

"So what's happening here is that the first modprobe tries to load a
fallback CBC implementation, in doing so it triggers a load of the
exact same module due to module aliases.

IOW we're loading aes-arm-bs which provides cbc(aes). However, this
needs a fallback of cbc(aes) to operate, which is made out of the
generic cbc module + any implementation of aes, or ecb(aes). The
latter happens to also be provided by aes-arm-cb so that's why it
tries to load the same module again"

So loading the aes-arm-bs module ends up wanting to recursively load
itself, and the recursive load then ends up waiting for the original
module load to complete.

This is a regression, in that it used to be that we just tried to load
the module multiple times, and then as we went on to install it the
second time we would instead just error out because the module name
already existed.

That is actually also exactly what the original "catch concurrent loads"
patch did in commit 9828ed3f ("module: error out early on concurrent
load of the same module file"), but it turns out that it ends up being
racy, in that erroring out before the module has been fully initialized
will cause failures in dependent module loading.

See commit ac2263b5 (which was the revert of that "error out early")
commit for details about why erroring out before the module has been
initialized is actually fundamentally racy.

Now, for the actual recursive module load (as opposed to just
concurrently loading the same module twice), the race is not an issue.

At the same time it's hard for the kernel to see that this is recursion,
because the module load is always done from a usermode helper, so the
recursion is not some simple callchain within the kernel.

End result: this is not the real fix, but this at least adds a warning
for the situation (admittedly much too late for all the debugging pain
that Russell and Herbert went through) and if we can come to a
resolution on how to detect the recursion properly, this re-organizes
the code to make that easier.

Link: https://lore.kernel.org/all/ZrFHLqvFqhzykuYw@shell.armlinux.org.uk/Reported-by: Russell King <linux@armlinux.org.uk>
Debugged-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cb5b81bc

Merge tag 'loongarch-fixes-6.11-1' of... · cf6d429e

Linus Torvalds authored Aug 08, 2024

Merge tag 'loongarch-fixes-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
 "Enable general EFI poweroff method to make poweroff usable on
  hardwares which lack ACPI S5, use accessors to page table entries
  instead of direct dereference to avoid potential problems, and two
  trivial kvm cleanups"

* tag 'loongarch-fixes-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: KVM: Remove undefined a6 argument comment for kvm_hypercall()
  LoongArch: KVM: Remove unnecessary definition of KVM_PRIVATE_MEM_SLOTS
  LoongArch: Use accessors to page table entries instead of direct dereference
  LoongArch: Enable general EFI poweroff method

cf6d429e

Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue · 2ff4ceb0

Jakub Kicinski authored Aug 08, 2024

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2024-08-07 (ice)

This series contains updates to ice driver only.

Grzegorz adds IRQ synchronization call before performing reset and
prevents writing to hardware when it is resetting.

Mateusz swaps incorrect assignment of FEC statistics.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ice: Fix incorrect assigns of FEC counts
  ice: Skip PTP HW writes during PTP reset procedure
  ice: Fix reset handler
====================

Link: https://patch.msgid.link/20240807224521.3819189-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

2ff4ceb0

net: dsa: microchip: disable EEE for KSZ8567/KSZ9567/KSZ9896/KSZ9897. · 0411f73c

Martin Whitaker authored Aug 07, 2024

As noted in the device errata [1-8], EEE support is not fully operational
in the KSZ8567, KSZ9477, KSZ9567, KSZ9896, and KSZ9897 devices, causing
link drops when connected to another device that supports EEE. The patch
series "net: add EEE support for KSZ9477 switch family" merged in commit
9b0bf4f7 caused EEE support to be enabled in these devices. A fix for
this regression for the KSZ9477 alone was merged in commit 08c6d8ba.
This patch extends this fix to the other affected devices.

[1] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ8567R-Errata-DS80000752.pdf
[2] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ8567S-Errata-DS80000753.pdf
[3] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9477S-Errata-DS80000754.pdf
[4] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9567R-Errata-DS80000755.pdf
[5] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9567S-Errata-DS80000756.pdf
[6] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9896C-Errata-DS80000757.pdf
[7] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9897R-Errata-DS80000758.pdf
[8] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9897S-Errata-DS80000759.pdf

Fixes: 69d3b36c ("net: dsa: microchip: enable EEE support") # for KSZ8567/KSZ9567/KSZ9896/KSZ9897
Link: https://lore.kernel.org/netdev/137ce1ee-0b68-4c96-a717-c8164b514eec@martin-whitaker.me.uk/Signed-off-by: Martin Whitaker <foss@martin-whitaker.me.uk>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Link: https://patch.msgid.link/20240807205209.21464-1-foss@martin-whitaker.me.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

0411f73c

ethtool: Fix context creation with no parameters · 4d7c3c1a

Gal Pressman authored Aug 07, 2024

The 'at least one change' requirement is not applicable for context
creation, skip the check in such case.
This allows a command such as 'ethtool -X eth0 context new' to work.

The command works by mistake when using older versions of userspace
ethtool due to an incompatibility issue where rxfh.input_xfrm is passed
as zero (unset) instead of RXH_XFRM_NO_CHANGE as done with recent
userspace. This patch does not try to solve the incompatibility issue.

Link: https://lore.kernel.org/netdev/05ae8316-d3aa-4356-98c6-55ed4253c8a7@nvidia.com/
Fixes: 84a1d9c4 ("net: ethtool: extend RXNFC API to support RSS spreading of filter matches")
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20240807173352.3501746-1-gal@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

4d7c3c1a

net: ethtool: fix off-by-one error in max RSS context IDs · b54de559

Edward Cree authored Aug 07, 2024

Both ethtool_ops.rxfh_max_context_id and the default value used when
it's not specified are supposed to be exclusive maxima (the former
is documented as such; the latter, U32_MAX, cannot be used as an ID
since it equals ETH_RXFH_CONTEXT_ALLOC), but xa_alloc() expects an
inclusive maximum.
Subtract one from 'limit' to produce an inclusive maximum, and pass
that to xa_alloc().
Increase bnxt's max by one to prevent a (very minor) regression, as
BNXT_MAX_ETH_RSS_CTX is an inclusive max. This is safe since bnxt
is not actually hard-limited; BNXT_MAX_ETH_RSS_CTX is just a
leftover from old driver code that managed context IDs itself.
Rename rxfh_max_context_id to rxfh_max_num_contexts to make its
semantics (hopefully) more obvious.

Fixes: 847a8ab1 ("net: ethtool: let the core choose RSS context IDs")
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/5a2d11a599aa5b0cc6141072c01accfb7758650c.1723045898.git.ecree.xilinx@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

b54de559

net: pse-pd: tps23881: include missing bitfield.h header · a70b637d

Arnd Bergmann authored Aug 07, 2024

Using FIELD_GET() fails in configurations that don't already include
the header file indirectly:

drivers/net/pse-pd/tps23881.c: In function 'tps23881_i2c_probe':
drivers/net/pse-pd/tps23881.c:755:13: error: implicit declaration of function 'FIELD_GET' [-Wimplicit-function-declaration]
  755 |         if (FIELD_GET(TPS23881_REG_DEVID_MASK, ret) != TPS23881_DEVICE_ID) {
      |             ^~~~~~~~~

Fixes: 89108cb5 ("net: pse-pd: tps23881: Fix the device ID check")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20240807075455.2055224-1-arnd@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

a70b637d

net: fec: Stop PPS on driver remove · 8fee6d5a

Csókás, Bence authored Aug 07, 2024

PPS was not stopped in `fec_ptp_stop()`, called when
the adapter was removed. Consequentially, you couldn't
safely reload the driver with the PPS signal on.

Fixes: 32cba57b ("net: fec: introduce fec_ptp_stop and use in probe fail path")
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/netdev/CAOMZO5BzcZR8PwKKwBssQq_wAGzVgf1ffwe_nhpQJjviTdxy-w@mail.gmail.com/T/#m01dcb810bfc451a492140f6797ca77443d0cb79fSigned-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20240807080956.2556602-1-csokas.bence@prolan.huSigned-off-by: Jakub Kicinski <kuba@kernel.org>

8fee6d5a

net: bcmgenet: Properly overlay PHY and MAC Wake-on-LAN capabilities · 9ee09edc

Florian Fainelli authored Aug 06, 2024

Some Wake-on-LAN modes such as WAKE_FILTER may only be supported by the MAC,
while others might be only supported by the PHY. Make sure that the .get_wol()
returns the union of both rather than only that of the PHY if the PHY supports
Wake-on-LAN.

Fixes: 7e400ff3 ("net: bcmgenet: Add support for PHY-based Wake-on-LAN")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240806175659.3232204-1-florian.fainelli@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

9ee09edc

l2tp: fix lockdep splat · 86a41ea9

James Chapman authored Aug 06, 2024

When l2tp tunnels use a socket provided by userspace, we can hit
lockdep splats like the below when data is transmitted through another
(unrelated) userspace socket which then gets routed over l2tp.

This issue was previously discussed here:
https://lore.kernel.org/netdev/87sfialu2n.fsf@cloudflare.com/

The solution is to have lockdep treat socket locks of l2tp tunnel
sockets separately than those of standard INET sockets. To do so, use
a different lockdep subclass where lock nesting is possible.

  ============================================
  WARNING: possible recursive locking detected
  6.10.0+ #34 Not tainted
  --------------------------------------------
  iperf3/771 is trying to acquire lock:
  ffff8881027601d8 (slock-AF_INET/1){+.-.}-{2:2}, at: l2tp_xmit_skb+0x243/0x9d0

  but task is already holding lock:
  ffff888102650d98 (slock-AF_INET/1){+.-.}-{2:2}, at: tcp_v4_rcv+0x1848/0x1e10

  other info that might help us debug this:
   Possible unsafe locking scenario:

         CPU0
         ----
    lock(slock-AF_INET/1);
    lock(slock-AF_INET/1);

   *** DEADLOCK ***

   May be due to missing lock nesting notation

  10 locks held by iperf3/771:
   #0: ffff888102650258 (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendmsg+0x1a/0x40
   #1: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x4b/0xbc0
   #2: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x17a/0x1130
   #3: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: process_backlog+0x28b/0x9f0
   #4: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_local_deliver_finish+0xf9/0x260
   #5: ffff888102650d98 (slock-AF_INET/1){+.-.}-{2:2}, at: tcp_v4_rcv+0x1848/0x1e10
   #6: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x4b/0xbc0
   #7: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x17a/0x1130
   #8: ffffffff822ac1e0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0xcc/0x1450
   #9: ffff888101f33258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock#2){+...}-{2:2}, at: __dev_queue_xmit+0x513/0x1450

  stack backtrace:
  CPU: 2 UID: 0 PID: 771 Comm: iperf3 Not tainted 6.10.0+ #34
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
  Call Trace:
   <IRQ>
   dump_stack_lvl+0x69/0xa0
   dump_stack+0xc/0x20
   __lock_acquire+0x135d/0x2600
   ? srso_alias_return_thunk+0x5/0xfbef5
   lock_acquire+0xc4/0x2a0
   ? l2tp_xmit_skb+0x243/0x9d0
   ? __skb_checksum+0xa3/0x540
   _raw_spin_lock_nested+0x35/0x50
   ? l2tp_xmit_skb+0x243/0x9d0
   l2tp_xmit_skb+0x243/0x9d0
   l2tp_eth_dev_xmit+0x3c/0xc0
   dev_hard_start_xmit+0x11e/0x420
   sch_direct_xmit+0xc3/0x640
   __dev_queue_xmit+0x61c/0x1450
   ? ip_finish_output2+0xf4c/0x1130
   ip_finish_output2+0x6b6/0x1130
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? __ip_finish_output+0x217/0x380
   ? srso_alias_return_thunk+0x5/0xfbef5
   __ip_finish_output+0x217/0x380
   ip_output+0x99/0x120
   __ip_queue_xmit+0xae4/0xbc0
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? tcp_options_write.constprop.0+0xcb/0x3e0
   ip_queue_xmit+0x34/0x40
   __tcp_transmit_skb+0x1625/0x1890
   __tcp_send_ack+0x1b8/0x340
   tcp_send_ack+0x23/0x30
   __tcp_ack_snd_check+0xa8/0x530
   ? srso_alias_return_thunk+0x5/0xfbef5
   tcp_rcv_established+0x412/0xd70
   tcp_v4_do_rcv+0x299/0x420
   tcp_v4_rcv+0x1991/0x1e10
   ip_protocol_deliver_rcu+0x50/0x220
   ip_local_deliver_finish+0x158/0x260
   ip_local_deliver+0xc8/0xe0
   ip_rcv+0xe5/0x1d0
   ? __pfx_ip_rcv+0x10/0x10
   __netif_receive_skb_one_core+0xce/0xe0
   ? process_backlog+0x28b/0x9f0
   __netif_receive_skb+0x34/0xd0
   ? process_backlog+0x28b/0x9f0
   process_backlog+0x2cb/0x9f0
   __napi_poll.constprop.0+0x61/0x280
   net_rx_action+0x332/0x670
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? find_held_lock+0x2b/0x80
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? srso_alias_return_thunk+0x5/0xfbef5
   handle_softirqs+0xda/0x480
   ? __dev_queue_xmit+0xa2c/0x1450
   do_softirq+0xa1/0xd0
   </IRQ>
   <TASK>
   __local_bh_enable_ip+0xc8/0xe0
   ? __dev_queue_xmit+0xa2c/0x1450
   __dev_queue_xmit+0xa48/0x1450
   ? ip_finish_output2+0xf4c/0x1130
   ip_finish_output2+0x6b6/0x1130
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? __ip_finish_output+0x217/0x380
   ? srso_alias_return_thunk+0x5/0xfbef5
   __ip_finish_output+0x217/0x380
   ip_output+0x99/0x120
   __ip_queue_xmit+0xae4/0xbc0
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? tcp_options_write.constprop.0+0xcb/0x3e0
   ip_queue_xmit+0x34/0x40
   __tcp_transmit_skb+0x1625/0x1890
   tcp_write_xmit+0x766/0x2fb0
   ? __entry_text_end+0x102ba9/0x102bad
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? __might_fault+0x74/0xc0
   ? srso_alias_return_thunk+0x5/0xfbef5
   __tcp_push_pending_frames+0x56/0x190
   tcp_push+0x117/0x310
   tcp_sendmsg_locked+0x14c1/0x1740
   tcp_sendmsg+0x28/0x40
   inet_sendmsg+0x5d/0x90
   sock_write_iter+0x242/0x2b0
   vfs_write+0x68d/0x800
   ? __pfx_sock_write_iter+0x10/0x10
   ksys_write+0xc8/0xf0
   __x64_sys_write+0x3d/0x50
   x64_sys_call+0xfaf/0x1f50
   do_syscall_64+0x6d/0x140
   entry_SYSCALL_64_after_hwframe+0x76/0x7e
  RIP: 0033:0x7f4d143af992
  Code: c3 8b 07 85 c0 75 24 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> e9 01 cc ff ff 41 54 b8 02 00 00 0
  RSP: 002b:00007ffd65032058 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
  RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f4d143af992
  RDX: 0000000000000025 RSI: 00007f4d143f3bcc RDI: 0000000000000005
  RBP: 00007f4d143f2b28 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4d143f3bcc
  R13: 0000000000000005 R14: 0000000000000000 R15: 00007ffd650323f0
   </TASK>

Fixes: 0b2c5972 ("l2tp: close all race conditions in l2tp_tunnel_register()")
Suggested-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+6acef9e0a4d1f46c83d4@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6acef9e0a4d1f46c83d4
CC: gnault@redhat.com
CC: cong.wang@bytedance.com
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Link: https://patch.msgid.link/20240806160626.1248317-1-jchapman@katalix.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

86a41ea9

net: stmmac: dwmac4: fix PCS duplex mode decode · 85ba108a

Russell King (Oracle) authored Aug 06, 2024

dwmac4 was decoding the duplex mode from the GMAC_PHYIF_CONTROL_STATUS
register incorrectly, using GMAC_PHYIF_CTRLSTATUS_LNKMOD_MASK (value 1)
rather than GMAC_PHYIF_CTRLSTATUS_LNKMOD (bit 16). Fix this.

Fixes: 70523e63 ("drivers: net: stmmac: reworking the PCS code.")
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1sbJvd-001rGD-E3@rmk-PC.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

85ba108a

Merge tag 'mm-hotfixes-stable-2024-08-07-18-32' of... · 660e4b18

Linus Torvalds authored Aug 08, 2024

Merge tag 'mm-hotfixes-stable-2024-08-07-18-32' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "Nine hotfixes. Five are cc:stable, the others either pertain to
  post-6.10 material or aren't considered necessary for earlier kernels.

  Five are MM and four are non-MM. No identifiable theme here - please
  see the individual changelogs"

* tag 'mm-hotfixes-stable-2024-08-07-18-32' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  padata: Fix possible divide-by-0 panic in padata_mt_helper()
  mailmap: update entry for David Heidelberg
  memcg: protect concurrent access to mem_cgroup_idr
  mm: shmem: fix incorrect aligned index when checking conflicts
  mm: shmem: avoid allocating huge pages larger than MAX_PAGECACHE_ORDER for shmem
  mm: list_lru: fix UAF for memory cgroup
  kcov: properly check for softirq context
  MAINTAINERS: Update LTP members and web
  selftests: mm: add s390 to ARCH check

660e4b18

Merge tag 'for-net-2024-08-07' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth · b928e7d1

Jakub Kicinski authored Aug 07, 2024

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

 - hci_sync: avoid dup filtering when passive scanning with adv monitor
 - hci_qca: don't call pwrseq_power_off() twice for QCA6390
 - hci_qca: fix QCA6390 support on non-DT platforms
 - hci_qca: fix a NULL-pointer derefence at shutdown
 - l2cap: always unlock channel in l2cap_conless_channel()

* tag 'for-net-2024-08-07' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: hci_sync: avoid dup filtering when passive scanning with adv monitor
  Bluetooth: l2cap: always unlock channel in l2cap_conless_channel()
  Bluetooth: hci_qca: fix a NULL-pointer derefence at shutdown
  Bluetooth: hci_qca: fix QCA6390 support on non-DT platforms
  Bluetooth: hci_qca: don't call pwrseq_power_off() twice for QCA6390
====================

Link: https://patch.msgid.link/20240807210103.142483-1-luiz.dentz@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

b928e7d1

Merge branch 'idpf-fix-3-bugs-revealed-by-the-chapter-i' · bc59b558

Jakub Kicinski authored Aug 07, 2024

Tony Nguyen says:

====================
idpf: fix 3 bugs revealed by the Chapter I

Alexander Lobakin says:

The libeth conversion revealed 2 serious issues which lead to sporadic
crashes or WARNs under certain configurations. Additional one was found
while debugging these two with kmemleak.
This one is targeted stable, the rest can be backported manually later
if needed. They can be reproduced only after the conversion is applied
anyway.
====================

Link: https://patch.msgid.link/20240806220923.3359860-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

bc59b558

idpf: fix UAFs when destroying the queues · 290f1c03

Alexander Lobakin authored Aug 06, 2024

The second tagged commit started sometimes (very rarely, but possible)
throwing WARNs from
net/core/page_pool.c:page_pool_disable_direct_recycling().
Turned out idpf frees interrupt vectors with embedded NAPIs *before*
freeing the queues making page_pools' NAPI pointers lead to freed
memory before these pools are destroyed by libeth.
It's not clear whether there are other accesses to the freed vectors
when destroying the queues, but anyway, we usually free queue/interrupt
vectors only when the queues are destroyed and the NAPIs are guaranteed
to not be referenced anywhere.

Invert the allocation and freeing logic making queue/interrupt vectors
be allocated first and freed last. Vectors don't require queues to be
present, so this is safe. Additionally, this change allows to remove
that useless queue->q_vector pointer cleanup, as vectors are still
valid when freeing the queues (+ both are freed within one function,
so it's not clear why nullify the pointers at all).

Fixes: 1c325aac ("idpf: configure resources for TX queues")
Fixes: 90912f9f ("idpf: convert header split mode to libeth + napi_build_skb()")
Reported-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240806220923.3359860-4-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

290f1c03

idpf: fix memleak in vport interrupt configuration · 3cc88e84

Michal Kubiak authored Aug 06, 2024

The initialization of vport interrupt consists of two functions:
1) idpf_vport_intr_init() where a generic configuration is done
2) idpf_vport_intr_req_irq() where the irq for each q_vector is
requested.

The first function used to create a base name for each interrupt using
"kasprintf()" call. Unfortunately, although that call allocated memory
for a text buffer, that memory was never released.

Fix this by removing creating the interrupt base name in 1).
Instead, always create a full interrupt name in the function 2), because
there is no need to create a base name separately, considering that the
function 2) is never called out of idpf_vport_intr_init() context.

Fixes: d4d55871 ("idpf: initialize interrupts and enable vport")
Cc: stable@vger.kernel.org # 6.7
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240806220923.3359860-3-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

3cc88e84

idpf: fix memory leaks and crashes while performing a soft reset · f01032a2

Alexander Lobakin authored Aug 06, 2024

The second tagged commit introduced a UAF, as it removed restoring
q_vector->vport pointers after reinitializating the structures.
This is due to that all queue allocation functions are performed here
with the new temporary vport structure and those functions rewrite
the backpointers to the vport. Then, this new struct is freed and
the pointers start leading to nowhere.

But generally speaking, the current logic is very fragile. It claims
to be more reliable when the system is low on memory, but in fact, it
consumes two times more memory as at the moment of running this
function, there are two vports allocated with their queues and vectors.
Moreover, it claims to prevent the driver from running into "bad state",
but in fact, any error during the rebuild leaves the old vport in the
partially allocated state.
Finally, if the interface is down when the function is called, it always
allocates a new queue set, but when the user decides to enable the
interface later on, vport_open() allocates them once again, IOW there's
a clear memory leak here.

Just don't allocate a new queue set when performing a reset, that solves
crashes and memory leaks. Readd the old queue number and reopen the
interface on rollback - that solves limbo states when the device is left
disabled and/or without HW queues enabled.

Fixes: 02cbfba1 ("idpf: add ethtool callbacks")
Fixes: e4891e46 ("idpf: split &idpf_queue into 4 strictly-typed queue structures")
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240806220923.3359860-2-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

f01032a2

bnxt_en : Fix memory out-of-bounds in bnxt_fill_hw_rss_tbl() · da03f5d1

Michael Chan authored Aug 05, 2024

A recent commit has modified the code in __bnxt_reserve_rings() to
set the default RSS indirection table to default only when the number
of RX rings is changing.  While this works for newer firmware that
requires RX ring reservations, it causes the regression on older
firmware not requiring RX ring resrvations (BNXT_NEW_RM() returns
false).

With older firmware, RX ring reservations are not required and so
hw_resc->resv_rx_rings is not always set to the proper value.  The
comparison:

if (old_rx_rings != bp->hw_resc.resv_rx_rings)

in __bnxt_reserve_rings() may be false even when the RX rings are
changing.  This will cause __bnxt_reserve_rings() to skip setting
the default RSS indirection table to default to match the current
number of RX rings.  This may later cause bnxt_fill_hw_rss_tbl() to
use an out-of-range index.

We already have bnxt_check_rss_tbl_no_rmgr() to handle exactly this
scenario.  We just need to move it up in bnxt_need_reserve_rings()
to be called unconditionally when using older firmware.  Without the
fix, if the TX rings are changing, we'll skip the
bnxt_check_rss_tbl_no_rmgr() call and __bnxt_reserve_rings() may also
skip the bnxt_set_dflt_rss_indir_tbl() call for the reason explained
in the last paragraph.  Without setting the default RSS indirection
table to default, it causes the regression:

BUG: KASAN: slab-out-of-bounds in __bnxt_hwrm_vnic_set_rss+0xb79/0xe40
Read of size 2 at addr ffff8881c5809618 by task ethtool/31525
Call Trace:
__bnxt_hwrm_vnic_set_rss+0xb79/0xe40
 bnxt_hwrm_vnic_rss_cfg_p5+0xf7/0x460
 __bnxt_setup_vnic_p5+0x12e/0x270
 __bnxt_open_nic+0x2262/0x2f30
 bnxt_open_nic+0x5d/0xf0
 ethnl_set_channels+0x5d4/0xb30
 ethnl_default_set_doit+0x2f1/0x620
Reported-by: Breno Leitao <leitao@debian.org>
Closes: https://lore.kernel.org/netdev/ZrC6jpghA3PWVWSB@gmail.com/
Fixes: 98ba1d93 ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Tested-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20240806053742.140304-1-michael.chan@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

da03f5d1

net: dsa: bcm_sf2: Fix a possible memory leak in bcm_sf2_mdio_register() · e3862093

Joe Hattori authored Aug 06, 2024

bcm_sf2_mdio_register() calls of_phy_find_device() and then
phy_device_remove() in a loop to remove existing PHY devices.
of_phy_find_device() eventually calls bus_find_device(), which calls
get_device() on the returned struct device * to increment the refcount.
The current implementation does not decrement the refcount, which causes
memory leak.

This commit adds the missing phy_device_free() call to decrement the
refcount via put_device() to balance the refcount.

Fixes: 771089c2 ("net: dsa: bcm_sf2: Ensure that MDIO diversion is used")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240806011327.3817861-1-joe@pf.is.s.u-tokyo.ac.jpSigned-off-by: Jakub Kicinski <kuba@kernel.org>

e3862093

net/smc: add the max value of fallback reason count · d27a835f

Zhengchao Shao authored Aug 05, 2024

The number of fallback reasons defined in the smc_clc.h file has reached
36. For historical reasons, some are no longer quoted, and there's 33
actually in use. So, add the max value of fallback reason count to 36.

Fixes: 6ac1e656 ("net/smc: support smc v2.x features validate")
Fixes: 7f0620b9 ("net/smc: support max connections per lgr negotiation")
Fixes: 69b888e3 ("net/smc: support max links per lgr negotiation in clc handshake")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Link: https://patch.msgid.link/20240805043856.565677-1-shaozhengchao@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

d27a835f

padata: Fix possible divide-by-0 panic in padata_mt_helper() · 6d45e1c9

Waiman Long authored Aug 06, 2024

We are hit with a not easily reproducible divide-by-0 panic in padata.c at
bootup time.

  [   10.017908] Oops: divide error: 0000 1 PREEMPT SMP NOPTI
  [   10.017908] CPU: 26 PID: 2627 Comm: kworker/u1666:1 Not tainted 6.10.0-15.el10.x86_64 #1
  [   10.017908] Hardware name: Lenovo ThinkSystem SR950 [7X12CTO1WW]/[7X12CTO1WW], BIOS [PSE140J-2.30] 07/20/2021
  [   10.017908] Workqueue: events_unbound padata_mt_helper
  [   10.017908] RIP: 0010:padata_mt_helper+0x39/0xb0
    :
  [   10.017963] Call Trace:
  [   10.017968]  <TASK>
  [   10.018004]  ? padata_mt_helper+0x39/0xb0
  [   10.018084]  process_one_work+0x174/0x330
  [   10.018093]  worker_thread+0x266/0x3a0
  [   10.018111]  kthread+0xcf/0x100
  [   10.018124]  ret_from_fork+0x31/0x50
  [   10.018138]  ret_from_fork_asm+0x1a/0x30
  [   10.018147]  </TASK>

Looking at the padata_mt_helper() function, the only way a divide-by-0
panic can happen is when ps->chunk_size is 0.  The way that chunk_size is
initialized in padata_do_multithreaded(), chunk_size can be 0 when the
min_chunk in the passed-in padata_mt_job structure is 0.

Fix this divide-by-0 panic by making sure that chunk_size will be at least
1 no matter what the input parameters are.

Link: https://lkml.kernel.org/r/20240806174647.1050398-1-longman@redhat.com
Fixes: 004ed426 ("padata: add basic support for multithreaded jobs")
Signed-off-by: Waiman Long <longman@redhat.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Waiman Long <longman@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

6d45e1c9

mailmap: update entry for David Heidelberg · f2087995

David Heidelberg authored Aug 04, 2024

Link my old gmail address to my active email.

Link: https://lkml.kernel.org/r/20240804054704.859503-1-david@ixit.czSigned-off-by: David Heidelberg <david@ixit.cz>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

f2087995

memcg: protect concurrent access to mem_cgroup_idr · 9972605a

Shakeel Butt authored Aug 02, 2024

Commit 73f576c0 ("mm: memcontrol: fix cgroup creation failure after
many small jobs") decoupled the memcg IDs from the CSS ID space to fix the
cgroup creation failures. It introduced IDR to maintain the memcg ID
space. The IDR depends on external synchronization mechanisms for
modifications. For the mem_cgroup_idr, the idr_alloc() and idr_replace()
happen within css callback and thus are protected through cgroup_mutex
from concurrent modifications. However idr_remove() for mem_cgroup_idr
was not protected against concurrency and can be run concurrently for
different memcgs when they hit their refcnt to zero. Fix that.

We have been seeing list_lru based kernel crashes at a low frequency in
our fleet for a long time. These crashes were in different part of
list_lru code including list_lru_add(), list_lru_del() and reparenting
code. Upon further inspection, it looked like for a given object (dentry
and inode), the super_block's list_lru didn't have list_lru_one for the
memcg of that object. The initial suspicions were either the object is
not allocated through kmem_cache_alloc_lru() or somehow
memcg_list_lru_alloc() failed to allocate list_lru_one() for a memcg but
returned success. No evidence were found for these cases.

Looking more deeply, we started seeing situations where valid memcg's id
is not present in mem_cgroup_idr and in some cases multiple valid memcgs
have same id and mem_cgroup_idr is pointing to one of them. So, the most
reasonable explanation is that these situations can happen due to race
between multiple idr_remove() calls or race between
idr_alloc()/idr_replace() and idr_remove(). These races are causing
multiple memcgs to acquire the same ID and then offlining of one of them
would cleanup list_lrus on the system for all of them. Later access from
other memcgs to the list_lru cause crashes due to missing list_lru_one.

Link: https://lkml.kernel.org/r/20240802235822.1830976-1-shakeel.butt@linux.dev
Fixes: 73f576c0 ("mm: memcontrol: fix cgroup creation failure after many small jobs")
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Muchun Song <muchun.song@linux.dev>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

9972605a

mm: shmem: fix incorrect aligned index when checking conflicts · 4cbf320b

Baolin Wang authored Jul 31, 2024

In the shmem_suitable_orders() function, xa_find() is used to check for
conflicts in the pagecache to select suitable huge orders.  However, when
checking each huge order in every loop, the aligned index is calculated
from the previous iteration, which may cause suitable huge orders to be
missed.

We should use the original index each time in the loop to calculate a new
aligned index for checking conflicts to avoid this issue.

Link: https://lkml.kernel.org/r/07433b0f16a152bffb8cee34934a5c040e8e2ad6.1722404078.git.baolin.wang@linux.alibaba.com
Fixes: e7a2ab7b ("mm: shmem: add mTHP support for anonymous shmem")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

4cbf320b

mm: shmem: avoid allocating huge pages larger than MAX_PAGECACHE_ORDER for shmem · b66b1b71

Baolin Wang authored Jul 31, 2024

Similar to commit d659b715 ("mm/huge_memory: avoid PMD-size page
cache if needed"), ARM64 can support 512MB PMD-sized THP when the base
page size is 64KB, which is larger than the maximum supported page cache
size MAX_PAGECACHE_ORDER.

This is not expected.  To fix this issue, use THP_ORDERS_ALL_FILE_DEFAULT
for shmem to filter allowable huge orders.

[baolin.wang@linux.alibaba.com: remove comment, per Barry]
  Link: https://lkml.kernel.org/r/c55d7ef7-78aa-4ed6-b897-c3e03a3f3ab7@linux.alibaba.com
[wangkefeng.wang@huawei.com: remove local `orders']
  Link: https://lkml.kernel.org/r/87769ae8-b6c6-4454-925d-1864364af9c8@huawei.com
Link: https://lkml.kernel.org/r/117121665254442c3c7f585248296495e5e2b45c.1722404078.git.baolin.wang@linux.alibaba.com
Fixes: e7a2ab7b ("mm: shmem: add mTHP support for anonymous shmem")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

b66b1b71

mm: list_lru: fix UAF for memory cgroup · 5161b487

Muchun Song authored Jul 18, 2024

The mem_cgroup_from_slab_obj() is supposed to be called under rcu lock or
cgroup_mutex or others which could prevent returned memcg from being
freed.  Fix it by adding missing rcu read lock.

Found by code inspection.

[songmuchun@bytedance.com: only grab rcu lock when necessary, per Vlastimil]
  Link: https://lkml.kernel.org/r/20240801024603.1865-1-songmuchun@bytedance.com
Link: https://lkml.kernel.org/r/20240718083607.42068-1-songmuchun@bytedance.com
Fixes: 0a97c01c ("list_lru: allow explicit memcg and NUMA node selection")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

5161b487