- 15 Mar, 2016 4 commits
-
-
Bjorn Helgaas authored
Merge branches 'pci/host-altera', 'pci/host-imx6', 'pci/host-keystone', 'pci/host-rcar', 'pci/host-tegra', 'pci/host-thunder', 'pci/host-vmd', 'pci/host-xilinx' and 'pci/host-xilinx-nwl' into next * pci/host-altera: PCI: altera: Fix altera_pcie_link_is_up() * pci/host-imx6: PCI: imx6: Add DT bindings to configure PHY Tx driver settings * pci/host-keystone: PCI: keystone: Defer probing if devm_phy_get() returns -EPROBE_DEFER * pci/host-rcar: PCI: rcar: Depend on ARCH_RENESAS, not ARCH_SHMOBILE * pci/host-tegra: PCI: tegra: Remove misleading PHYS_OFFSET PCI: tegra: Track bus -> CPU mapping PCI: tegra: Remove unused struct tegra_pcie.num_ports field PCI: tegra: Implement ->{add,remove}_bus() callbacks PCI: Add pci_ops.{add,remove}_bus() callbacks * pci/host-thunder: PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices PCI: thunder: Add PCIe host driver for ThunderX processors PCI: generic: Expose pci_host_common_probe() for use by other drivers PCI: generic: Add pci_host_common_probe(), based on gen_pci_probe() PCI: generic: Move structure definitions to separate header file * pci/host-vmd: x86/PCI: VMD: Attach VMD resources to parent domain's resource tree x86/PCI: VMD: Set bus resource start to 0 x86/PCI: VMD: Document code for maintainability * pci/host-xilinx: microblaze/PCI: Support generic Xilinx AXI PCIe Host Bridge IP driver PCI: xilinx: Update Zynq binding with Microblaze node PCI: xilinx: Don't call pci_fixup_irqs() on Microblaze PCI: xilinx: Remove dependency on ARM-specific struct hw_pci PCI: xilinx: Use of_pci_get_host_bridge_resources() to parse DT * pci/host-xilinx-nwl: PCI: xilinx-nwl: Add support for Xilinx NWL PCIe Host Controller -
Bjorn Helgaas authored
Merge branches 'pci/aer', 'pci/enumeration', 'pci/kconfig', 'pci/misc', 'pci/virtualization' and 'pci/vpd' into next * pci/aer: PCI/AER: Log aer_inject error injections PCI/AER: Log actual error causes in aer_inject PCI/AER: Use dev_warn() in aer_inject PCI/AER: Fix aer_inject error codes * pci/enumeration: PCI: Fix broken URL for Dell biosdevname * pci/kconfig: PCI: Cleanup pci/pcie/Kconfig whitespace PCI: Include pci/hotplug Kconfig directly from pci/Kconfig PCI: Include pci/pcie/Kconfig directly from pci/Kconfig * pci/misc: PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition PCI: Add QEMU top-level IDs for (sub)vendor & device unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition PCI: Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h PCI: Move pci_dma_* helpers to common code frv/PCI: Remove stray pci_{alloc,free}_consistent() declaration * pci/virtualization: PCI: Wait for up to 1000ms after FLR reset PCI: Support SR-IOV on any function type * pci/vpd: PCI: Prevent VPD access for buggy devices PCI: Sleep rather than busy-wait for VPD access completion PCI: Fold struct pci_vpd_pci22 into struct pci_vpd PCI: Rename VPD symbols to remove unnecessary "pci22" PCI: Remove struct pci_vpd_ops.release function pointer PCI: Move pci_vpd_release() from header file to pci/access.c PCI: Move pci_read_vpd() and pci_write_vpd() close to other VPD code PCI: Determine actual VPD size on first access PCI: Use bitfield instead of bool for struct pci_vpd_pci22.busy PCI: Allow access to VPD attributes with size 0 PCI: Update VPD definitions -
Heikki Krogerus authored
PCI-SIG has defined Interface FEh for Base Class 0Ch, Sub-Class 03h as "USB Device (not host controller)". It is already being used in various USB device controller drivers for matching, so add PCI_CLASS_SERIAL_USB_DEVICE and use it. Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com>
-
Andreas Ziegler authored
Clean up style issues in drivers/pci/pcie/Kconfig, in particular all indentation is now done using tabs, not spaces, and the definition of PCIEASPM_DEBUG is now separated from the definition of PCIEASPM with a newline. Signed-off-by:
Andreas Ziegler <andreas.ziegler@fau.de> Signed-off-by:
-
- 11 Mar, 2016 9 commits
-
-
David Daney authored
The cavium,pci-thunder-ecam devices are exactly ECAM-based PCI root complexes. These root complexes (loosely referred to as ECAM units in the hardware manuals) are used to access the Thunder on-chip devices. They are special in that all the BARs on devices behind these root complexes are at fixed addresses. Add a driver for these devices that synthesizes Enhanced Allocation (EA) capability entries for each BAR. Since this EA synthesis is needed for exactly two chip models, we can hard- code some assumptions about the device topology and the layout of the config space of specific DEVFNs in the driver. [bhelgaas: changelog, whitespace] Signed-off-by:
David Daney <david.daney@cavium.com> Signed-off-by:
Rob Herring <robh@kernel.org>
-
David Daney authored
The root complexes used to access off-chip PCIe devices (called PEM units in the hardware manuals) on some Cavium ThunderX processors require quirky access methods for the config space of the PCIe bridge. Add a driver to provide these config space accessor functions. Use the pci-host-common code to configure the PCI machinery. Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
David Daney authored
Move pci_host_common_probe() and associated functions to pci-host-common.c, where it can be shared with other drivers. Make it public (not static) and update Kconfig and Makefile to build it. No functional change intended. [bhelgaas: split into separate patch, changelog] Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
David Daney authored
Factor gen_pci_probe(), moving most of it into pci_host_common_probe() where it can be shared with other drivers that have slightly different config accessors. No functional change intended. [bhelgaas: split into separate patch, changelog] Signed-off-by:
-
David Daney authored
Move definitions for generic PCI host controller driver structures to a separate header file so we can share them with other drivers. No functional change intended. [bhelgaas: split into separate patch, changelog] Signed-off-by:
-
Bharat Kumar Gogada authored
Add PCIe Root Port driver for Xilinx PCIe NWL bridge IP. [bhelgaas: wait for link like dw_pcie_wait_for_link(), simplify bitmap error path, typos, whitespace, fold in Dan Carpenter's PTR_ERR() fix] Signed-off-by:
Bharat Kumar Gogada <bharatku@xilinx.com> Signed-off-by:
Ravi Kiran Gummaluri <rgummal@xilinx.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Acked-by:
-
Shawn Lin authored
A SerDes PHY is optional, so if devm_phy_get() doesn't find one at all, that's fine. But if devm_phy_get() finds a PHY that doesn't have a driver yet, it returns -EPROBE_DEFER. In that case, defer probing the Keystone driver. We may be able to load it later after a PHY driver is loaded. [bhelgaas: changelog, check for -EPROBE_DEFER first] Signed-off-by:
Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by:
-
Ley Foon Tan authored
Originally altera_pcie_link_is_up() decided the link was up if any of the low four bits of the LTSSM register were set. But the link is only up if the LTSSM state is L0, so check for that exact value. [bhelgaas: changelog] Signed-off-by:
Ley Foon Tan <lftan@altera.com> Signed-off-by:
-
Simon Horman authored
Make the R-Car drivers depend on ARCH_RENESAS instead of ARCH_SHMOBILE. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS. The motivation is that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM-based SoCs. Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be>
-
- 10 Mar, 2016 6 commits
-
-
Jon Derrick authored
Attach the new VMD domain's resources to the VMD device's resources. This allows /proc/iomem to display a more complete picture. Before: c0000000-c1ffffff : 0000:5d:05.5 c2000000-c3ffffff : 0000:5d:05.5 c2010000-c2013fff : nvme c4000000-c40fffff : 0000:5d:05.5 After: c0000000-c1ffffff : 0000:5d:05.5 c2000000-c3ffffff : 0000:5d:05.5 c2000000-c3ffffff : VMD MEMBAR1 c2000000-c22fffff : PCI Bus 10000:01 c2000000-c200ffff : 10000:01:00.0 c2010000-c2013fff : 10000:01:00.0 c2010000-c2013fff : nvme c2300000-c24fffff : PCI Bus 10000:01 c4000000-c40fffff : 0000:5d:05.5 c4002000-c40fffff : VMD MEMBAR2 Signed-off-by:Jon Derrick <jonathan.derrick@intel.com> Signed-off-by:
Keith Busch <keith.busch@intel.com>
-
Keith Busch authored
The bus always starts at 0. Due to alignment and down-casting, this happened to work before, but looked alarmingly incorrect in kernel logs. Signed-off-by:
-
Keith Busch authored
Comment the less obvious portion of the code for setting up memory windows, and the platform dependency for initializing the h/w with appropriate resources. Signed-off-by:
-
Alex Williamson authored
Some devices take longer than the spec indicates to return from FLR reset, a notable case of this is Intel integrated graphics (IGD), which can often take an additional 300ms powering down an attached LCD panel as part of the FLR. Allow devices up to 1000ms, testing every 100ms whether the second dword of config space is read as -1. Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Babu Moger authored
On some devices, reading or writing VPD causes a system panic. This can be easily reproduced by running "lspci -vvv" or "cat /sys/bus/devices/XX../vpd". Blacklist these devices so we don't access VPD data at all. [bhelgaas: changelog, comment, drop pci/access.c changes] Link: https://bugzilla.kernel.org/show_bug.cgi?id=110681Tested-by:
Shane Seymour <shane.seymour@hpe.com> Tested-by:
Babu Moger <babu.moger@oracle.com> Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Bjorn Helgaas authored
Use usleep_range() instead of udelay() while waiting for a VPD access to complete. This is not a performance path, so no need to hog the CPU. Rationale for usleep_range() parameters: We clear PCI_VPD_ADDR_F for a read (or set it for a write), then wait for the device to change it. For a device that updates PCI_VPD_ADDR between our config write and subsequent config read, we won't sleep at all and can get the device's maximum rate. Sleeping a minimum of 10 usec per 4-byte access limits throughput to about 400Kbytes/second. VPD is small (32K bytes at most), and most devices use only a fraction of that. We back off exponentially up to 1024 usec per iteration. If we reach 1024, we've already waited up to 1008 usec (16 + 32 + ... + 512), so if we miss an update and wait an extra 1024 usec, we can still get about 1/2 of the device's maximum rate. Tested-by:
Hannes Reinecke <hare@suse.com>
-
- 09 Mar, 2016 1 commit
-
-
Robin H. Johnson authored
Introduce PCI_VENDOR/PCI_SUBVENDOR/PCI_SUBDEVICE defines to replace the constants scattered in the kernel already used to detect QEMU. They are defined in the QEMU codebase per docs/specs/pci-ids.txt. Signed-off-by:
Robin H. Johnson <robbat2@gentoo.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Reviewed-by:
Gerd Hoffmann <kraxel@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 08 Mar, 2016 17 commits
-
-
Jean Delvare authored
Log successful error injections so that injected errors can be differentiated from real errors. Suggested-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
-
Jean Delvare authored
The aer_inject driver is very quiet. In most cases, it merely returns an error code to user-space, leaving the user with little clue about the actual reason for the failure. So, log error messages for 4 of the most frequent causes of failure: * Can't find the root port of the specified device. * Device doesn't support AER. * Root port doesn't support AER. * AER device not found. This gives the user a chance to understand why aer-inject failed. Based on a preliminary patch by Thomas Renninger. Signed-off-by:
-
Jean Delvare authored
dev_warn() is better than printk(LOG_WARNING...) as it records which device the message relates to. Also add a prefix "aer_inject:" to help differentiate real errors from injected errors. Signed-off-by:
-
Jean Delvare authored
EPERM means "Operation not permitted", which doesn't reflect the lack of support for AER. EPROTONOSUPPORT (Protocol not supported) is a better choice of error code if the device or its root port lack support for AER. Likewise, EINVAL means "Invalid argument", which is not suitable for cases where the AER error device is missing or unusable. ENODEV and EPROTONOSUPPORT, respectively, fit better. Suggested-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Thierry Reding authored
BARs are disabled when the size register is 0, so it's misleading to write a base address into the start register. Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Thierry Reding authored
Track the offsets of the bus -> CPU mapping for I/O and memory. This is cosmetic for current Tegra chips because the offset is always 0. But to properly support legacy use-cases, like VGA, this would be needed so that PCI bus addresses can be relocated. While at it, also request the I/O resource both in physical memory and I/O space to make /proc/iomem consistent, as well as add the I/O region to the list of host bridge resources. Signed-off-by:
-
Thierry Reding authored
The num_ports field of the tegra_pcie structure is never used so remove it. Signed-off-by:
-
Thierry Reding authored
The configuration space mapping on Tegra is somewhat special, and in order to avoid wasting virtual address space the configuration space for each bus needs to be stitched together from several blocks which form a single continuous virtual address range for accessors. Currently the configuration space is mapped upon the first access to one of its registers. However, the mapping operation may sleep under certain circumstances, so doing it from the configuration space accessors (they are protected by a spin lock) will trigger a warning. To avoid the warning, use the ->add_bus() callback to perform the mapping at enumeration time when the operation is allowed to sleep. Also add an implementation of ->remove_bus() that undoes the mapping established by the ->add_bus() callback. While it isn't currently possible to unload the module, there is work underway to remedy this, and this code will come in handy when that happens. Signed-off-by:
-
Thierry Reding authored
Add pci_ops.{add,remove}_bus() callbacks, which will be called on every newly created bus and when a bus is being removed, respectively. This can be used by drivers to implement driver-specific initialization and teardown of the bus, in addition to the architecture-specifics implemented by the pcibios_add_bus() and the pcibios_remove_bus() functions. Signed-off-by: -
Bjorn Helgaas authored
Include pci/hotplug/Kconfig directly from pci/Kconfig, so arches don't have to source both pci/Kconfig and pci/hotplug/Kconfig. Note that this effectively adds pci/hotplug/Kconfig to the following arches, because they already sourced drivers/pci/Kconfig but they previously did not source drivers/pci/hotplug/Kconfig: alpha arm avr32 frv m68k microblaze mn10300 sparc unicore32 Inspired-by-patch-from: Bogicevic Sasa <brutallesale@gmail.com> Signed-off-by: -
Bogicevic Sasa authored
Include pci/pcie/Kconfig directly from pci/Kconfig, so arches don't have to source both pci/Kconfig and pci/pcie/Kconfig. Note that this effectively adds pci/pcie/Kconfig to the following arches, because they already sourced drivers/pci/Kconfig but they previously did not source drivers/pci/pcie/Kconfig: alpha avr32 blackfin frv m32r m68k microblaze mn10300 parisc sparc unicore32 xtensa [bhelgaas: changelog, source pci/pcie/Kconfig at top of pci/Kconfig, whitespace] Signed-off-by:
Sasa Bogicevic <brutallesale@gmail.com> Signed-off-by:
-
Bharat Kumar Gogada authored
Modify the Microblaze PCI subsystem to work with the generic drivers/pci/host/pcie-xilinx.c driver on Microblaze and Zynq. [bhelgaas: changelog] Signed-off-by:
Michal Simek <michal.simek@xilinx.com>
-
Bharat Kumar Gogada authored
Update Zynq PCI binding documentation with Microblaze node. [bhelgaas: fix "microbalze_0_intc" typo] Signed-off-by:
-
Bharat Kumar Gogada authored
The Xilinx AXI PCIe Host Bridge Soft IP driver was previously only supported on ARM (in particular, on ARCH_ZYNC), and pci_fixup_irqs() is available there. But Microblaze will do IRQ fixup in pcibios_add_device(), so pci_fixup_irqs() is not available on Microblaze. Don't call pci_fixup_irqs() on Microblaze, so the driver can work on both Zynq and Microblaze Architectures. [bhelgaas: revise changelog to show similarity to bdb8a184 ("PCI: iproc: Call pci_fixup_irqs() for ARM64 as well as ARM")] Signed-off-by:
-
Bharat Kumar Gogada authored
The Xilinx PCIe host controller driver uses pci_common_init_dev(), which is ARM-specific and requires the ARM struct hw_pci. The part of pci_common_init_dev() that is needed is limited and can be done here without using hw_pci. Create and scan the root bus directly without using the ARM pci_common_init_dev() interface. [bhelgaas: revise changelog to show similarity to 79953dd2 ("PCI: rcar: Remove dependency on ARM-specific struct hw_pci")] Signed-off-by:
-
Bharat Kumar Gogada authored
Use the new of_pci_get_host_bridge_resources() API in place of the PCI OF DT parser. [bhelgaas: revise changelog to show similarity to 0021d22b ("PCI: designware: Use of_pci_get_host_bridge_resources() to parse DT")] Signed-off-by:
-
Bjorn Helgaas authored
HAVE_ARCH_PCI_SET_DMA_MASK is unused, so remove the #define for it. Signed-off-by:
GUAN Xuetao <gxt@mprc.pku.edu.cn>
-
- 07 Mar, 2016 3 commits
-
-
Bjorn Helgaas authored
Christoph added a generic include/linux/pci-dma-compat.h, so now there's one place with most of the PCI DMA interfaces. Move more PCI DMA-related things there: - The PCI_DMA_* direction constants from linux/pci.h - The pci_set_dma_max_seg_size() and pci_set_dma_seg_boundary() CONFIG_PCI implementations from drivers/pci/pci.c - The pci_set_dma_max_seg_size() and pci_set_dma_seg_boundary() !CONFIG_PCI stubs from linux/pci.h - The pci_set_dma_mask() and pci_set_consistent_dma_mask() !CONFIG_PCI stubs from linux/pci.h Signed-off-by: -
Christoph Hellwig authored
For a long time all architectures implement the pci_dma_* functions using the generic DMA API, and they all use the same header to do so. Move this header, pci-dma-compat.h, to include/linux and include it from the generic pci.h instead of having each arch duplicate this include. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Christoph Hellwig authored
FRV doesn't implement pci_{alloc,free}_consistent(), so remove the declarations for them. Signed-off-by:David S. Miller <davem@davemloft.net> Acked-by:
David Howells <dhowells@redhat.com>
-
