- 13 May, 2016 10 commits
-
-
Linus Torvalds authored
Merge tag 'regulator-fix-v4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A small collection of driver specific fixes for the regulator subsysetem: - Fix handling of probe deferral for GPIO regulators - Fix a typo in the module alias for DA9053 - Fix the definition of BUCK9 in the S2MPS11 driver. This change looks larger than it is because an irregularity in the hardware means that the macro used to define bucks 6-10 needs duplicating and tweaking to have a separate macro for 9 - Fix a series of errors in the definitions of the LDOs the AXP20x regulators, some of which had always been present and some of which were introduced in the merge window" * tag 'regulator-fix-v4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: da9063: Correct module alias prefix to fix module autoloading regulator: axp20x: Fix axp22x ldo_io registration error on cold boot regulator: axp20x: Fix axp22x ldo_io voltage ranges regulator: axp20x: Fix LDO4 linear voltage range regulator: s2mps11: Fix invalid selector mask and voltages for buck9 regulator: gpio: check return value of of_get_named_gpio
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmapLinus Torvalds authored
Pull regmap fixes from Mark Brown: "This is rather too late so it'd be completely understandable if you don't want to pull it at this point, I had thought I'd sent this earlier but it seems I didn't. Everything has been in -next for some time now. The main set of fixes here are mopping up some more issues with MMIO, fixing handling of endianness configuration in DT (which just wasn't working at all) and cases where the register and value endianness are different. There is also a fix for bulk register reads on SPMI" * tag 'regmap-fix-v4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: spmi: Fix regmap_spmi_ext_read in multi-byte case regmap: mmio: Explicitly say little endian is the defualt in the bus config regmap: mmio: Parse endianness definitions from DT regmap: Fix implicit inclusion of device.h regmap: mmio: Fix value endianness selection regmap: fix documentation to match code
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fix from Mauro Carvalho Chehab: "A revert fixing a breakage that caused an OOPS on all VB2-based DVB drivers. We already have a proper fix, but it sounds safer to keep it being tested for a while and not hurry, to avoid the risk of another regression, specially since this is meant to be c/c to stable. So, for now, let's just revert the broken patch" * tag 'media/v4.6-6' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: Revert "[media] videobuf2-v4l2: Verify planes array in buffer dequeueing"
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "A bunch of radeon displayport mode setting fixes, and some misc i915 fixes. There is one revert, the MST audio code in i915 was causing some oopses, so we've decided just to drop it until next kernel when we can fix it properly" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/amdgpu: fix DP mode validation drm/radeon: fix DP mode validation drm/i915: Bail out of pipe config compute loop on LPT drm/radeon: fix PLL sharing on DCE6.1 (v2) drm/radeon: fix DP link training issue with second 4K monitor Revert "drm/i915: start adding dp mst audio" drm/i915/bdw: Add missing delay during L3 SQC credit programming drm/i915/lvds: separate border enable readout from panel fitter drm/i915: Update CDCLK_FREQ register on BDW after changing cdclk frequency
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fix from Herbert Xu: "This fixes a bug in the RSA self-test that may cause crashes on some architectures such as SPARC" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: testmgr - Use kmalloc memory for RSA input
-
Mark Brown authored
Merge remote-tracking branches 'regulator/fix/axp20x', 'regulator/fix/da9063', 'regulator/fix/gpio' and 'regulator/fix/s2mps11' into regulator-linus
-
Mark Brown authored
Merge remote-tracking branches 'regmap/fix/be', 'regmap/fix/doc' and 'regmap/fix/spmi' into regmap-linus
-
Mark Brown authored
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
DP mode validation regression fix. * 'drm-fixes-4.6' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: fix DP mode validation drm/radeon: fix DP mode validation
-
Linus Torvalds authored
Merge fixes from Andrew Morton: "4 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: thp: calculate the mapcount correctly for THP pages during WP faults ksm: fix conflict between mmput and scan_get_next_rmap_item ocfs2: fix posix_acl_create deadlock ocfs2: revert using ocfs2_acl_chmod to avoid inode cluster lock hang
-
- 12 May, 2016 13 commits
-
-
Andrea Arcangeli authored
This will provide fully accuracy to the mapcount calculation in the write protect faults, so page pinning will not get broken by false positive copy-on-writes. total_mapcount() isn't the right calculation needed in reuse_swap_page(), so this introduces a page_trans_huge_mapcount() that is effectively the full accurate return value for page_mapcount() if dealing with Transparent Hugepages, however we only use the page_trans_huge_mapcount() during COW faults where it strictly needed, due to its higher runtime cost. This also provide at practical zero cost the total_mapcount information which is needed to know if we can still relocate the page anon_vma to the local vma. If page_trans_huge_mapcount() returns 1 we can reuse the page no matter if it's a pte or a pmd_trans_huge triggering the fault, but we can only relocate the page anon_vma to the local vma->anon_vma if we're sure it's only this "vma" mapping the whole THP physical range. Kirill A. Shutemov discovered the problem with moving the page anon_vma to the local vma->anon_vma in a previous version of this patch and another problem in the way page_move_anon_rmap() was called. Andrew Morton discovered that CONFIG_SWAP=n wouldn't build in a previous version, because reuse_swap_page must be a macro to call page_trans_huge_mapcount from swap.h, so this uses a macro again instead of an inline function. With this change at least it's a less dangerous usage than it was before, because "page" is used only once now, while with the previous code reuse_swap_page(page++) would have called page_mapcount on page+1 and it would have increased page twice instead of just once. Dean Luick noticed an uninitialized variable that could result in a rmap inefficiency for the non-THP case in a previous version. Mike Marciniszyn said: : Our RDMA tests are seeing an issue with memory locking that bisects to : commit 61f5d698 ("mm: re-enable THP") : : The test program registers two rather large MRs (512M) and RDMA : writes data to a passive peer using the first and RDMA reads it back : into the second MR and compares that data. The sizes are chosen randomly : between 0 and 1024 bytes. : : The test will get through a few (<= 4 iterations) and then gets a : compare error. : : Tracing indicates the kernel logical addresses associated with the individual : pages at registration ARE correct , the data in the "RDMA read response only" : packets ARE correct. : : The "corruption" occurs when the packet crosse two pages that are not physically : contiguous. The second page reads back as zero in the program. : : It looks like the user VA at the point of the compare error no longer points to : the same physical address as was registered. : : This patch totally resolves the issue! Link: http://lkml.kernel.org/r/1462547040-1737-2-git-send-email-aarcange@redhat.comSigned-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: "Kirill A. Shutemov" <kirill@shutemov.name> Reviewed-by: Dean Luick <dean.luick@intel.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Tested-by: Josh Collier <josh.d.collier@intel.com> Cc: Marc Haber <mh+linux-kernel@zugschlus.de> Cc: <stable@vger.kernel.org> [4.5] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Zhou Chengming authored
A concurrency issue about KSM in the function scan_get_next_rmap_item. task A (ksmd): |task B (the mm's task): | mm = slot->mm; | down_read(&mm->mmap_sem); | | ... | | spin_lock(&ksm_mmlist_lock); | | ksm_scan.mm_slot go to the next slot; | | spin_unlock(&ksm_mmlist_lock); | |mmput() -> | ksm_exit(): | |spin_lock(&ksm_mmlist_lock); |if (mm_slot && ksm_scan.mm_slot != mm_slot) { | if (!mm_slot->rmap_list) { | easy_to_free = 1; | ... | |if (easy_to_free) { | mmdrop(mm); | ... | |So this mm_struct may be freed in the mmput(). | up_read(&mm->mmap_sem); | As we can see above, the ksmd thread may access a mm_struct that already been freed to the kmem_cache. Suppose a fork will get this mm_struct from the kmem_cache, the ksmd thread then call up_read(&mm->mmap_sem), will cause mmap_sem.count to become -1. As suggested by Andrea Arcangeli, unmerge_and_remove_all_rmap_items has the same SMP race condition, so fix it too. My prev fix in function scan_get_next_rmap_item will introduce a different SMP race condition, so just invert the up_read/spin_unlock order as Andrea Arcangeli said. Link: http://lkml.kernel.org/r/1462708815-31301-1-git-send-email-zhouchengming1@huawei.comSigned-off-by: Zhou Chengming <zhouchengming1@huawei.com> Suggested-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Geliang Tang <geliangtang@163.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Ding Tianhong <dingtianhong@huawei.com> Cc: Li Bin <huawei.libin@huawei.com> Cc: Zhen Lei <thunder.leizhen@huawei.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Junxiao Bi authored
Commit 702e5bc6 ("ocfs2: use generic posix ACL infrastructure") refactored code to use posix_acl_create. The problem with this function is that it is not mindful of the cluster wide inode lock making it unsuitable for use with ocfs2 inode creation with ACLs. For example, when used in ocfs2_mknod, this function can cause deadlock as follows. The parent dir inode lock is taken when calling posix_acl_create -> get_acl -> ocfs2_iop_get_acl which takes the inode lock again. This can cause deadlock if there is a blocked remote lock request waiting for the lock to be downconverted. And same deadlock happened in ocfs2_reflink. This fix is to revert back using ocfs2_init_acl. Fixes: 702e5bc6 ("ocfs2: use generic posix ACL infrastructure") Signed-off-by: Tariq Saeed <tariq.x.saeed@oracle.com> Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Junxiao Bi authored
Commit 743b5f14 ("ocfs2: take inode lock in ocfs2_iop_set/get_acl()") introduced this issue. ocfs2_setattr called by chmod command holds cluster wide inode lock when calling posix_acl_chmod. This latter function in turn calls ocfs2_iop_get_acl and ocfs2_iop_set_acl. These two are also called directly from vfs layer for getfacl/setfacl commands and therefore acquire the cluster wide inode lock. If a remote conversion request comes after the first inode lock in ocfs2_setattr, OCFS2_LOCK_BLOCKED will be set. And this will cause the second call to inode lock from the ocfs2_iop_get_acl() to block indefinetly. The deleted version of ocfs2_acl_chmod() calls __posix_acl_chmod() which does not call back into the filesystem. Therefore, we restore ocfs2_acl_chmod(), modify it slightly for locking as needed, and use that instead. Fixes: 743b5f14 ("ocfs2: take inode lock in ocfs2_iop_set/get_acl()") Signed-off-by: Tariq Saeed <tariq.x.saeed@oracle.com> Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fsLinus Torvalds authored
Pull keyring fix from David Howells: "Fix ASN.1 indefinite length object parsing" * tag 'keys-fixes-20160512' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: KEYS: Fix ASN.1 indefinite length object parsing
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "This is a pretty boring pull request as you wish: including a few small and trivial HD-audio and USB-audio quirks and a couple of small regression fixes in HD-audio" * tag 'sound-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Yet another Phoneix Audio device quirk ALSA: hda - Fix regression on ATI HDMI audio ALSA: hda - Fix subwoofer pin on ASUS N751 and N551 ALSA: hda - Fix broken reconfig ALSA: hda - Fix white noise on Asus UX501VW headset ALSA: usb-audio: Quirk for yet another Phoenix Audio devices (v2)
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input subsystem fixes from Dmitry Torokhov. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: twl6040-vibra - fix DT node memory management Input: max8997-haptic - fix NULL pointer dereference Input: byd - update copyright header
-
Alex Deucher authored
Switch the order of the loops to walk the rates on the top so we exhaust all DP 1.1 rate/lane combinations before trying DP 1.2 rate/lane combos. This avoids selecting rates that are supported by the monitor, but not the connector leading to valid modes getting rejected. bug: https://bugs.freedesktop.org/show_bug.cgi?id=95206Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Alex Deucher authored
Switch the order of the loops to walk the rates on the top so we exhaust all DP 1.1 rate/lane combinations before trying DP 1.2 rate/lane combos. This avoids selecting rates that are supported by the monitor, but not the connector leading to valid modes getting rejected. bug: https://bugs.freedesktop.org/show_bug.cgi?id=95206Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pinctrl fix from Linus Walleij: "A single last pin control fix for v4.6. t's tagged for stable and only hits a single driver with two added lines so should be safe. Tested in linux-next. - The pull up/down logic for the AT91 PIO4 controller was tilted: we need to mask the reverse pull when unmasking a pull direction. Setting both pull up & pull down is illegal and makes no sense" * tag 'pinctrl-v4.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: at91-pio4: fix pull-up/down logic
-
David Howells authored
This fixes CVE-2016-0758. In the ASN.1 decoder, when the length field of an ASN.1 value is extracted, it isn't validated against the remaining amount of data before being added to the cursor. With a sufficiently large size indicated, the check: datalen - dp < 2 may then fail due to integer overflow. Fix this by checking the length indicated against the amount of remaining data in both places a definite length is determined. Whilst we're at it, make the following changes: (1) Check the maximum size of extended length does not exceed the capacity of the variable it's being stored in (len) rather than the type that variable is assumed to be (size_t). (2) Compare the EOC tag to the symbolic constant ASN1_EOC rather than the integer 0. (3) To reduce confusion, move the initialisation of len outside of: for (len = 0; n > 0; n--) { since it doesn't have anything to do with the loop counter n. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Peter Jones <pjones@redhat.com>
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Two some radeon display fixes. * 'drm-fixes-4.6' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix PLL sharing on DCE6.1 (v2) drm/radeon: fix DP link training issue with second 4K monitor
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
Misc intel fixes, reverting MST audio which was causing oops for now. * tag 'drm-intel-fixes-2016-05-11' of git://anongit.freedesktop.org/drm-intel: drm/i915: Bail out of pipe config compute loop on LPT Revert "drm/i915: start adding dp mst audio" drm/i915/bdw: Add missing delay during L3 SQC credit programming drm/i915/lvds: separate border enable readout from panel fitter drm/i915: Update CDCLK_FREQ register on BDW after changing cdclk frequency
-
- 11 May, 2016 17 commits
-
-
Mauro Carvalho Chehab authored
This patch causes a Kernel panic when called on a DVB driver. This was also reported by David R <david@unsolicited.net>: May 7 14:47:35 server kernel: [ 501.247123] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 May 7 14:47:35 server kernel: [ 501.247239] IP: [<ffffffffa0222c71>] __verify_planes_array.isra.3+0x1/0x80 [videobuf2_v4l2] May 7 14:47:35 server kernel: [ 501.247354] PGD cae6f067 PUD ca99c067 PMD 0 May 7 14:47:35 server kernel: [ 501.247426] Oops: 0000 [#1] SMP May 7 14:47:35 server kernel: [ 501.247482] Modules linked in: xfs tun xt_connmark xt_TCPMSS xt_tcpmss xt_owner xt_REDIRECT nf_nat_redirect xt_nat ipt_MASQUERADE nf_nat_masquerade_ipv4 ts_kmp ts_bm xt_string ipt_REJECT nf_reject_ipv4 xt_recent xt_conntrack xt_multiport xt_pkttype xt_tcpudp xt_mark nf_log_ipv4 nf_log_common xt_LOG xt_limit iptable_mangle iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_filter ip_tables ip6table_filter ip6_tables x_tables pppoe pppox dm_crypt ts2020 regmap_i2c ds3000 cx88_dvb dvb_pll cx88_vp3054_i2c mt352 videobuf2_dvb cx8800 cx8802 cx88xx pl2303 tveeprom videobuf2_dma_sg ppdev videobuf2_memops videobuf2_v4l2 videobuf2_core dvb_usb_digitv snd_hda_codec_via snd_hda_codec_hdmi snd_hda_codec_generic radeon dvb_usb snd_hda_intel amd64_edac_mod serio_raw snd_hda_codec edac_core fbcon k10temp bitblit softcursor snd_hda_core font snd_pcm_oss i2c_piix4 snd_mixer_oss tileblit drm_kms_helper syscopyarea snd_pcm snd_seq_dummy sysfillrect snd_seq_oss sysimgblt fb_sys_fops ttm snd_seq_midi r8169 snd_rawmidi drm snd_seq_midi_event e1000e snd_seq snd_seq_device snd_timer snd ptp pps_core i2c_algo_bit soundcore parport_pc ohci_pci shpchp tpm_tis tpm nfsd auth_rpcgss oid_registry hwmon_vid exportfs nfs_acl mii nfs bonding lockd grace lp sunrpc parport May 7 14:47:35 server kernel: [ 501.249564] CPU: 1 PID: 6889 Comm: vb2-cx88[0] Not tainted 4.5.3 #3 May 7 14:47:35 server kernel: [ 501.249644] Hardware name: System manufacturer System Product Name/M4A785TD-V EVO, BIOS 0211 07/08/2009 May 7 14:47:35 server kernel: [ 501.249767] task: ffff8800aebf3600 ti: ffff8801e07a0000 task.ti: ffff8801e07a0000 May 7 14:47:35 server kernel: [ 501.249861] RIP: 0010:[<ffffffffa0222c71>] [<ffffffffa0222c71>] __verify_planes_array.isra.3+0x1/0x80 [videobuf2_v4l2] May 7 14:47:35 server kernel: [ 501.250002] RSP: 0018:ffff8801e07a3de8 EFLAGS: 00010086 May 7 14:47:35 server kernel: [ 501.250071] RAX: 0000000000000283 RBX: ffff880210dc5000 RCX: 0000000000000283 May 7 14:47:35 server kernel: [ 501.250161] RDX: ffffffffa0222cf0 RSI: 0000000000000000 RDI: ffff880210dc5014 May 7 14:47:35 server kernel: [ 501.250251] RBP: ffff8801e07a3df8 R08: ffff8801e07a0000 R09: 0000000000000000 May 7 14:47:35 server kernel: [ 501.250348] R10: 0000000000000000 R11: 0000000000000001 R12: ffff8800cda2a9d8 May 7 14:47:35 server kernel: [ 501.250438] R13: ffff880210dc51b8 R14: 0000000000000000 R15: ffff8800cda2a828 May 7 14:47:35 server kernel: [ 501.250528] FS: 00007f5b77fff700(0000) GS:ffff88021fc40000(0000) knlGS:00000000adaffb40 May 7 14:47:35 server kernel: [ 501.250631] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b May 7 14:47:35 server kernel: [ 501.250704] CR2: 0000000000000004 CR3: 00000000ca19d000 CR4: 00000000000006e0 May 7 14:47:35 server kernel: [ 501.250794] Stack: May 7 14:47:35 server kernel: [ 501.250822] ffff8801e07a3df8 ffffffffa0222cfd ffff8801e07a3e70 ffffffffa0236beb May 7 14:47:35 server kernel: [ 501.250937] 0000000000000283 ffff8801e07a3e94 0000000000000000 0000000000000000 May 7 14:47:35 server kernel: [ 501.251051] ffff8800aebf3600 ffffffff8108d8e0 ffff8801e07a3e38 ffff8801e07a3e38 May 7 14:47:35 server kernel: [ 501.251165] Call Trace: May 7 14:47:35 server kernel: [ 501.251200] [<ffffffffa0222cfd>] ? __verify_planes_array_core+0xd/0x10 [videobuf2_v4l2] May 7 14:47:35 server kernel: [ 501.251306] [<ffffffffa0236beb>] vb2_core_dqbuf+0x2eb/0x4c0 [videobuf2_core] May 7 14:47:35 server kernel: [ 501.251398] [<ffffffff8108d8e0>] ? prepare_to_wait_event+0x100/0x100 May 7 14:47:35 server kernel: [ 501.251482] [<ffffffffa023855b>] vb2_thread+0x1cb/0x220 [videobuf2_core] May 7 14:47:35 server kernel: [ 501.251569] [<ffffffffa0238390>] ? vb2_core_qbuf+0x230/0x230 [videobuf2_core] May 7 14:47:35 server kernel: [ 501.251662] [<ffffffffa0238390>] ? vb2_core_qbuf+0x230/0x230 [videobuf2_core] May 7 14:47:35 server kernel: [ 501.255982] [<ffffffff8106f984>] kthread+0xc4/0xe0 May 7 14:47:35 server kernel: [ 501.260292] [<ffffffff8106f8c0>] ? kthread_park+0x50/0x50 May 7 14:47:35 server kernel: [ 501.264615] [<ffffffff81697a5f>] ret_from_fork+0x3f/0x70 May 7 14:47:35 server kernel: [ 501.268962] [<ffffffff8106f8c0>] ? kthread_park+0x50/0x50 May 7 14:47:35 server kernel: [ 501.273216] Code: 0d 01 74 16 48 8b 46 28 48 8b 56 30 48 89 87 d0 01 00 00 48 89 97 d8 01 00 00 5d c3 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 55 <8b> 46 04 48 89 e5 8d 50 f7 31 c0 83 fa 01 76 02 5d c3 48 83 7e May 7 14:47:35 server kernel: [ 501.282146] RIP [<ffffffffa0222c71>] __verify_planes_array.isra.3+0x1/0x80 [videobuf2_v4l2] May 7 14:47:35 server kernel: [ 501.286391] RSP <ffff8801e07a3de8> May 7 14:47:35 server kernel: [ 501.290619] CR2: 0000000000000004 May 7 14:47:35 server kernel: [ 501.294786] ---[ end trace b2b354153ccad110 ]--- This reverts commit 2c1f6951. Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: stable@vger.kernel.org Fixes: 2c1f6951 ("[media] videobuf2-v4l2: Verify planes array in buffer dequeueing") Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is a couple of small fixes: one is a potential uninitialised error variable in the alua code, potentially causing spurious failures and the other is a problem caused by the conversion of SCSI to hostwide tags which resulted in the qla1280 driver always failing in host initialisation" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: qla1280: Don't allocate 512kb of host tags scsi_dh_alua: uninitialized variable in alua_rtpg()
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Hopefully the last round of fixes this release, fingers crossed :) 1) Initialize static nf_conntrack_locks_all_lock properly, from Florian Westphal. 2) Need to cancel pending work when destroying IDLETIMER entries, from Liping Zhang. 3) Fix TX param usage when sending TSO over iwlwifi devices, from Emmanuel Grumbach. 4) NFACCT quota params not validated properly, from Phil Turnbull. 5) Resolve more glibc vs. kernel header conflicts, from Mikko Tapeli. 6) Missing IRQ free in ravb_close(), from Geert Uytterhoeven. 7) Fix infoleak in x25, from Kangjie Lu. 8) Similarly in thunderx driver, from Heinrich Schuchardt. 9) tc_ife.h uapi header not exported properly, from Jamal Hadi Salim. 10) Don't reenable PHY interreupts if device is in polling mode, from Shaohui Xie. 11) Packet scheduler actions late binding was not being handled properly at all, from Jamal Hadi Salim. 12) Fix binding of conntrack entries to helpers in openvswitch, from Joe Stringer" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (21 commits) gre: do not keep the GRE header around in collect medata mode openvswitch: Fix cached ct with helper. net sched: ife action fix late binding net sched: skbedit action fix late binding net sched: simple action fix late binding net sched: mirred action fix late binding net sched: ipt action fix late binding net sched: vlan action fix late binding net: phylib: fix interrupts re-enablement in phy_start tcp: refresh skb timestamp at retransmit time net: nps_enet: bug fix - handle lost tx interrupts net: nps_enet: Tx handler synchronization export tc ife uapi header net: thunderx: avoid exposing kernel stack net: fix a kernel infoleak in x25 module ravb: Add missing free_irq() call to ravb_close() uapi glibc compat: fix compile errors when glibc net/if.h included before linux/if.h netfilter: nfnetlink_acct: validate NFACCT_QUOTA parameter iwlwifi: mvm: don't override the rate with the AMSDU len netfilter: IDLETIMER: fix race condition when destroy the target ...
-
Jiri Benc authored
For ipgre interface in collect metadata mode, it doesn't make sense for the interface to be of ARPHRD_IPGRE type. The outer header of received packets is not needed, as all the information from it is present in metadata_dst. We already don't set ipgre_header_ops for collect metadata interfaces, which is the only consumer of mac_header pointing to the outer IP header. Just set the interface type to ARPHRD_NONE in collect metadata mode for ipgre (not gretap, that still correctly stays ARPHRD_ETHER) and reset mac_header. Fixes: a64b04d8 ("gre: do not assign header_ops in collect metadata mode") Fixes: 2e15ea39 ("ip_gre: Add support to collect tunnel metadata.") Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Stringer authored
When using conntrack helpers from OVS, a common configuration is to perform a lookup without specifying a helper, then go through a firewalling policy, only to decide to attach a helper afterwards. In this case, the initial lookup will cause a ct entry to be attached to the skb, then the later commit with helper should attach the helper and confirm the connection. However, the helper attachment has been missing. If the user has enabled automatic helper attachment, then this issue will be masked as it will be applied in init_conntrack(). It is also masked if the action is executed from ovs_packet_cmd_execute() as that will construct a fresh skb. This patch fixes the issue by making an explicit call to try to assign the helper if there is a discrepancy between the action's helper and the current skb->nfct. Fixes: cae3a262 ("openvswitch: Allow attaching helpers to ct action") Signed-off-by: Joe Stringer <joe@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mathias Krause authored
The x86 exception table sorting was changed in commit 29934b0f ("x86/extable: use generic search and sort routines") to use the arch independent code in lib/extable.c. However, the patch was mangled somehow on its way into the kernel from the last version posted at [1]. The committed version kind of attempted to incorporate the changes of commit 548acf19 ("x86/mm: Expand the exception table logic to allow new handling options") as in _completely_ _ignoring_ the x86 specific 'handler' member of struct exception_table_entry. This effectively broke the sorting as entries will only partly be swapped now. Fortunately, the x86 Kconfig selects BUILDTIME_EXTABLE_SORT, so the exception table doesn't need to be sorted at runtime. However, in case that ever changes, we better not break the exception table sorting just because of that. [ Ard Biesheuvel points out that BUILDTIME_EXTABLE_SORT applies to the core image only, but we still rely on the sorting routines for modules in that case - Linus ] Fix this by providing a swap_ex_entry_fixup() macro that takes care of the 'handler' member. [1] https://lkml.org/lkml/2016/1/27/232Signed-off-by: Mathias Krause <minipli@googlemail.com> Fixes: 29934b0f ("x86/extable: use generic search and sort routines") Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi fixes from Mark Brown: "A bunch of small driver specific fixes that have come up, none of them remarkable in themselves. One fixes a regression introduced in the merge window and another two are targetted at stable" * tag 'spi-fix-v4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: pxa2xx: Do not detect number of enabled chip selects on Intel SPT spi: spi-ti-qspi: Handle truncated frames properly spi: spi-ti-qspi: Fix FLEN and WLEN settings if bits_per_word is overridden spi: omap2-mcspi: Undo broken fix for dma transfer of vmalloced buffer spi: spi-fsl-dspi: Fix cs_change handling in message transfer
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "Two small x86 patches, improving "make kvmconfig" and fixing an objtool warning for CONFIG_PROFILE_ALL_BRANCHES" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvmconfig: add more virtio drivers x86/kvm: Add stack frame dependency to fastop() inline asm
-
Takashi Iwai authored
Phoenix Audio has yet another device with another id (even a different vendor id, 0556:0014) that requires the same quirk for the sample rate. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=110221 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The HDMI/DP audio output on ATI/AMD chips got broken due to the recent restructuring of chmap. Fortunately, Daniel Exner could bisect, and pointed the culprit commit [739ffee9: ALSA: hda - Add hdmi chmap verb programming ops to chmap object]. This commit moved some ops from hdmi_ops to chmap_ops, and reassigned the ops in the embedded chmap object in hdmi_spec instead. Unfortunately, the reassignment of these ops in patch_atihdmi() were moved into an if block that is performed only for old chips. Thus, on newer chips, the generic ops is still used, which doesn't work for such ATI/AMD chips. This patch addresses the regression, simply by moving the assignment of chmap ops to the right place. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=114981 Fixes: 739ffee9 ('ALSA: hda - Add hdmi chmap verb programming ops to chmap object') Reported-and-tested-by: Daniel Exner <dex@dragonslave.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
David S. Miller authored
Jamal Hadi Salim says: ==================== Some actions were broken in allowing for late binding of actions. Late binding workflow is as follows: a) create an action and provide all necessary parameters for it Optionally provide an index or let the kernel give you one. Example: sudo tc actions add action police rate 1kbit burst 90k drop index 1 b) later on bind to the pre-created action from a filter definition by merely specifying the index. Example: sudo tc filter add dev lo parent ffff: protocol ip prio 8 \ u32 match ip src 127.0.0.8/32 flowid 1:8 action police index 1 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jamal Hadi Salim authored
The process below was broken and is fixed with this patch. //add an ife action and give it an instance id of 1 sudo tc actions add action ife encode \ type 0xDEAD allow mark dst 02:15:15:15:15:15 index 1 //create a filter which binds to ife action id 1 sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\ match ip dst 17.0.0.1/32 flowid 1:11 action ife index 1 Message before fix was: RTNETLINK answers: Invalid argument We have an error talking to the kernel Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jamal Hadi Salim authored
The process below was broken and is fixed with this patch. //add a skbedit action and give it an instance id of 1 sudo tc actions add action skbedit mark 10 index 1 //create a filter which binds to skbedit action id 1 sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\ match ip dst 17.0.0.1/32 flowid 1:10 action skbedit index 1 Message before fix was: RTNETLINK answers: Invalid argument We have an error talking to the kernel Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jamal Hadi Salim authored
The process below was broken and is fixed with this patch. //add a simple action and give it an instance id of 1 sudo tc actions add action simple sdata "foobar" index 1 //create a filter which binds to simple action id 1 sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\ match ip dst 17.0.0.1/32 flowid 1:10 action simple index 1 Message before fix was: RTNETLINK answers: Invalid argument We have an error talking to the kernel Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jamal Hadi Salim authored
The process below was broken and is fixed with this patch. //add an mirred action and give it an instance id of 1 sudo tc actions add action mirred egress mirror dev $MDEV index 1 //create a filter which binds to mirred action id 1 sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\ match ip dst 17.0.0.1/32 flowid 1:10 action mirred index 1 Message before bug fix was: RTNETLINK answers: Invalid argument We have an error talking to the kernel Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jamal Hadi Salim authored
This was broken and is fixed with this patch. //add an ipt action and give it an instance id of 1 sudo tc actions add action ipt -j mark --set-mark 2 index 1 //create a filter which binds to ipt action id 1 sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\ match ip dst 17.0.0.1/32 flowid 1:10 action ipt index 1 Message before bug fix was: RTNETLINK answers: Invalid argument We have an error talking to the kernel Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jamal Hadi Salim authored
Late vlan action binding was broken and is fixed with this patch. //add a vlan action to pop and give it an instance id of 1 sudo tc actions add action vlan pop index 1 //create filter which binds to vlan action id 1 sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32 \ match ip dst 17.0.0.1/32 flowid 1:1 action vlan index 1 current message(before bug fix) was: RTNETLINK answers: Invalid argument We have an error talking to the kernel Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-