- 14 Sep, 2022 24 commits
-
-
Krzysztof Kozlowski authored
Certain pins, like SDcard related, do not have functions and such should not be required: sdc1-clk-pins: 'function' is a required property Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220912061746.6311-25-krzysztof.kozlowski@linaro.orgSigned-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Krzysztof Kozlowski authored
There are 182 GPIOs on SC7280. Signed-off-by:
-
Krzysztof Kozlowski authored
Add common gpio-line-names property and restrict gpio-reserved-ranges to fixed size. Signed-off-by:
-
Krzysztof Kozlowski authored
Certain pins, like SDcard related, do not have functions and such should not be required: sdc1-clk-pins: 'function' is a required property Signed-off-by:
-
Krzysztof Kozlowski authored
Bindings example should be indented with 4-spaces. Signed-off-by:
-
Krzysztof Kozlowski authored
Matching PMIC GPIOs config nodes within a '-state' node by '.*' pattern does not work as expected because of linux,phandle in the DTB: qcom/sm4250-oneplus-billie2.dtb: pinctrl@500000: sdc1-on-state: 'oneOf' conditional failed, one must be fixed: 'pins' is a required property 'clk', 'cmd', 'data', 'rclk' do not match any of the regexes: 'pinctrl-[0-9]+' [[26]] is not of type 'object' Make the schema stricter and expect such nodes to be followed with a '-pins' suffix. Signed-off-by: -
Krzysztof Kozlowski authored
Certain pins, like SDcard related, do not have functions and such should not be required: sdc1-clk-pins: 'function' is a required property Signed-off-by:
-
Krzysztof Kozlowski authored
Bindings example should be indented with 4-spaces. Signed-off-by:
-
Krzysztof Kozlowski authored
Matching PMIC GPIOs config nodes within a '-state' node by '.*' pattern does not work as expected because of linux,phandle in the DTB: sm8350-hdk.dtb: pinctrl@f100000: qup-uart3-default-state: 'oneOf' conditional failed, one must be fixed: 'pins' is a required property 'function' is a required property 'rx', 'tx' do not match any of the regexes: 'pinctrl-[0-9]+' [[59]] is not of type 'object' Make the schema stricter and expect such nodes to be followed with a '-pins' suffix. Signed-off-by: -
Krzysztof Kozlowski authored
Bindings example should be indented with 4-spaces. Signed-off-by:
-
Krzysztof Kozlowski authored
Each subnode configuring pins (so the final -pins or pinconf) should reference common TLMM pin definition. Signed-off-by:
-
Krzysztof Kozlowski authored
Certain pins, like SDcard related, do not have functions and such should not be required: sdc1-clk-pins: 'function' is a required property Signed-off-by:
-
Krzysztof Kozlowski authored
Bindings example should be indented with 4-spaces. Signed-off-by:
-
Krzysztof Kozlowski authored
Certain pins, like SDcard related, do not have functions and such should not be required: sdc1-clk-pins: 'function' is a required property Signed-off-by:
-
Krzysztof Kozlowski authored
Matching PMIC GPIOs config nodes within a '-state' node by '.*' pattern does not work as expected because of linux,phandle in the DTB: 'pins' is a required property 'function' is a required property 'rx', 'tx' do not match any of the regexes: 'pinctrl-[0-9]+' [[59]] is not of type 'object' Make the schema stricter and expect such nodes to be followed with a '-pins' suffix. Signed-off-by: -
Krzysztof Kozlowski authored
Bindings example should be indented with 4-spaces. Signed-off-by:
-
Krzysztof Kozlowski authored
Certain pins, like SDcard related, do not have functions and such should not be required: sdc1-clk-pins: 'function' is a required property Signed-off-by:
-
Krzysztof Kozlowski authored
Matching PMIC GPIOs config nodes within a '-state' node by '.*' pattern does not work as expected because of linux,phandle in the DTB: 'pins' is a required property 'function' is a required property 'rx', 'tx' do not match any of the regexes: 'pinctrl-[0-9]+' [[59]] is not of type 'object' Make the schema stricter and expect such nodes to be followed with a '-pins' suffix. Signed-off-by: -
Krzysztof Kozlowski authored
Extend example with children for pin configuration and indent it with 4-spaces. Signed-off-by:
-
Krzysztof Kozlowski authored
Certain pins, like SDcard related, do not have functions and such should not be required: sdc1-clk-pins: 'function' is a required property Signed-off-by:
-
Krzysztof Kozlowski authored
Matching PMIC GPIOs config nodes within a '-state' node by '.*' pattern does not work as expected because of linux,phandle in the DTB: 'pins' is a required property 'function' is a required property 'rx', 'tx' do not match any of the regexes: 'pinctrl-[0-9]+' [[59]] is not of type 'object' Make the schema stricter and expect such nodes to be followed with a '-pins' suffix. Signed-off-by: -
Krzysztof Kozlowski authored
Bindings example should be indented with 4-spaces. Signed-off-by:
Iskren Chernev <iskren.chernev@gmail.com> Reviewed-by:
-
Krzysztof Kozlowski authored
Require function on GPIOs (so not on SD card pins). Signed-off-by:
-
Krzysztof Kozlowski authored
Matching PMIC GPIOs config nodes within a '-state' node by '.*' pattern does not work as expected because of linux,phandle in the DTB: 'pins' is a required property 'function' is a required property 'rx', 'tx' do not match any of the regexes: 'pinctrl-[0-9]+' [[59]] is not of type 'object' Make the schema stricter and expect such nodes to be followed with a '-pins' suffix. Signed-off-by:
-
- 09 Sep, 2022 1 commit
-
-
Andy Shevchenko authored
Move the default values to the 'default' case in the switches. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220908142134.59068-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
- 08 Sep, 2022 15 commits
-
-
Andy Shevchenko authored
fwnode_irq_get() may return all possible signed values, such as Linux error code or 0. Fix the code to handle this properly. Fixes: 1074e1d2 ("pinctrl: pistachio: Switch to use fwnode instead of") Signed-off-by:
-
Manivannan Sadhasivam authored
The irqchip implementation used inside the gpiochips are not supposed to be changed during runtime. So let's make the one inside the spmi-gpio gpiochip immutable. This fixes the below warning during boot: gpio gpiochip0: (c440000.spmi:pmic@0:gpio@c000): not an immutable chip, please consider fixing it! Acked-by:
Marc Zyngier <maz@kernel.org> Signed-off-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by:
Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220830092232.168561-1-manivannan.sadhasivam@linaro.org [switched two lines as indicated by Johan] Signed-off-by:
-
Andy Shevchenko authored
GPIO library now accepts fwnode as a firmware node, so switch the driver to use it. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220905180034.73132-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Andy Shevchenko authored
fwnode_irq_get() may return all possible signed values, such as Linux error code. Fix the code to handle this properly. Fixes: be2dc859 ("pinctrl: pinctrl-microchip-sgpio: Add irq support (for sparx5)") Signed-off-by:
Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20220906115021.8661-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Andy Shevchenko authored
GPIO library now accepts fwnode as a firmware node, so switch the driver to use it. Signed-off-by:
-
Iskren Chernev authored
Ideally this and similar common properties will be inherited so you won't need to paste them in every pinctrl binding. Signed-off-by:
Caleb Connolly <caleb@connolly.tech> Link: https://lore.kernel.org/r/20220903174150.3566935-5-iskren.chernev@gmail.comSigned-off-by:
-
Francesco Dolcini authored
PINCTRL_IMX depends on OF, however the dependency is missed when selected by PINCTRL_IMX8M* (it does not follow the indirect 'select' statements), select it explicitly. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Linus Walleij <linus.walleij@linaro.org> Reported-by:
kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/all/202209050605.fezJUgFH-lkp@intel.com/ Fixes: 87c2a29a ("pinctrl: imx8m: kconfig: Depends on SOC_IMX8M") Signed-off-by:
Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by:
Jacky Bai <ping.bai@nxp.com> Link: https://lore.kernel.org/r/20220905224408.346425-1-francesco.dolcini@toradex.comSigned-off-by:
-
Andy Shevchenko authored
In a few comments the style is not aligned with the rest. Correct them. While at it, drop unneeded blank lines and deduplicate 'Author'. Signed-off-by:
Patrick Rudolph <patrick.rudolph@9elements.com> Link: https://lore.kernel.org/r/20220902182650.83098-17-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Andy Shevchenko authored
Make use of the GENMASK() (far less error-prone, far more concise). Signed-off-by:
-
Andy Shevchenko authored
ACPI table on Intel Galileo Gen 1 has wrong pin number for IRQ resource of the I²C GPIO expander. Since we know what that number is and luckily have GPIO bases fixed for SoC's controllers, we may use a simple DMI quirk to match the platform and retrieve GpioInt() pin on it for the expander in question. Signed-off-by:
-
Andy Shevchenko authored
Add support of the expander found on Intel Galileo Gen1 board. The platform information comes from ACPI. Signed-off-by:
-
Andy Shevchenko authored
Convert the module to be property provider agnostic and allow it to be used on non-OF platforms. Add mod_devicetable.h include. Signed-off-by:
-
Andy Shevchenko authored
The introduced callback ->pin_dbg_show() is useful for debugging. Signed-off-by:
-
Andy Shevchenko authored
Move the default values to the 'default' case in the switches. Signed-off-by:
-
Andy Shevchenko authored
Since we have pin configuration getter and setter provided, there is no need to duplicate that in the custom ->set_config(). Instead, switch to gpiochip_generic_config(). Signed-off-by:
-
