- 17 Feb, 2016 40 commits
-
-
Peter Hurley authored
commit 0bfd464d upstream. Allow a signal to interrupt the wait for a tty reopen; eg., if the tty has starting final close and is waiting for the device to drain. Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Hurley authored
commit 6d27a63c upstream. Although n_tty_check_unthrottle() has a valid ldisc reference (since the tty core gets the ldisc ref in tty_read() before calling the line discipline read() method), it does not have a valid ldisc reference to the "other" pty of a pty pair. Since getting an ldisc reference for tty->link essentially open-codes tty_wakeup(), just replace with the equivalent tty_wakeup(). Signed-off-by:
-
Lu Baolu authored
commit ccc04afb upstream. Intel Broxton M was verifed to require XHCI_PME_STUCK_QUIRK quirk as well. Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Lu Baolu authored
commit fa895377 upstream. Commit abce329c ("xhci: Workaround to get D3 working in Intel xHCI") adds a workaround for a limitation of PME storm caused by SSIC port in some Intel SoCs. This commit only handled one SSIC port, while there are actually two SSIC ports in the chips. This patch handles both SSIC ports. Without this fix, users still see PME storm. Signed-off-by:
Zhuang Jin Can <jin.can.zhuang@intel.com> Signed-off-by:
-
Srinivas Kandagatla authored
commit a38a08df upstream. This driver registers for extcon events as part of its probe, but never unregisters them in case of error in the probe path. There were multiple issues noticed due to this missing error handling. One of them is random crashes if the regulators are not ready yet by the time probe is invoked. Ivan's previous attempt [1] to fix this issue, did not really address all the failure cases like regualtor/get_irq failures. [1] https://lkml.org/lkml/2015/9/7/62 Without this patch the kernel would carsh with log: ... Unable to handle kernel paging request at virtual address 17d78410 pgd = ffffffc001a5c000 [17d78410] *pgd=00000000b6806003, *pud=00000000b6806003, *pmd=0000000000000000 Internal error: Oops: 96000005 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 6 Comm: kworker/u8:0 Not tainted 4.4.0+ #48 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) Workqueue: deferwq deferred_probe_work_func task: ffffffc03686e900 ti: ffffffc0368b0000 task.ti: ffffffc0368b0000 PC is at raw_notifier_chain_register+0x1c/0x44 LR is at extcon_register_notifier+0x88/0xc8 pc : [<ffffffc0000da43c>] lr : [<ffffffc000606298>] pstate: 80000085 sp : ffffffc0368b3a70 x29: ffffffc0368b3a70 x28: ffffffc03680c310 x27: ffffffc035518000 x26: ffffffc035518000 x25: ffffffc03bfa20e0 x24: ffffffc035580a18 x23: 0000000000000000 x22: ffffffc035518458 x21: ffffffc0355e9a60 x20: ffffffc035518000 x19: 0000000000000000 x18: 0000000000000028 x17: 0000000000000003 x16: ffffffc0018153c8 x15: 0000000000000001 x14: ffffffc03686f0f8 x13: ffffffc03686f0f8 x12: 0000000000000003 x11: 0000000000000001 x10: 0000000000000001 x9 : ffffffc03686f0f8 x8 : 0000e3872014c1a1 x7 : 0000000000000028 x6 : 0000000000000000 x5 : 0000000000000001 x4 : 0000000000000000 x3 : 00000000354fb170 x2 : 0000000017d78400 x1 : ffffffc0355e9a60 x0 : ffffffc0354fb268 Fixes: 591fc116 ("usb: phy: msm: Use extcon framework for VBUS and ID detection") Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Lu Baolu authored
commit ffdb1e36 upstream. For Intel 7260 modem, it is needed for host side to send zero packet if the BULK OUT size is equal to USB endpoint max packet length. Otherwise, modem side may still wait for more data and cannot give response to host side. Signed-off-by:
Konrad Leszczynski <konrad.leszczynski@intel.com> Signed-off-by:
-
Lu Baolu authored
commit 19454462 upstream. In current acm driver, the bulk-in callback function ignores the URBs unlinked in usb core. This causes unexpected data loss in some cases. For example, runtime suspend entry will unlinked all urbs and set urb->status to -ENOENT even those urbs might have data not processed yet. Hence, data loss occurs. This patch lets bulk-in callback function handle unlinked urbs to avoid data loss. Signed-off-by:
Tang Jian Qiang <jianqiang.tang@intel.com> Signed-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
John Ernberg authored
commit 4152b387 upstream. In certain kernel configurations where the cdc_ether and option drivers are compiled as modules there can occur a race condition in enumeration. This causes the option driver to enumerate the ethernet(wwan) interface as usb-serial interfaces. usb-devices output for the modem: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=0055 Rev=00.00 S: Manufacturer=Cinterion S: Product=AHx C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=10mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether Signed-off-by:
John Ernberg <john.ernberg@actia.se> Fixes: 1941138e ("USB: added support for Cinterion's products...") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Daniele Palmas authored
commit ff4e2494 upstream. This patch adds support for two PIDs of LE922. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
-
Peter Dedecker authored
commit f487c54d upstream. Added the USB serial console device ID for IAI Corp. RCB-CV-USB USB to RS485 adaptor. Signed-off-by:
Peter Dedecker <peter.dedecker@hotmail.com> Signed-off-by:
-
Greg Kroah-Hartman authored
commit e03cdf22 upstream. Harald Linden reports that the ftdi_sio driver works properly for the Yaesu SCU-18 cable if the device ids are added to the driver. So let's add them. Reported-by:
Harald Linden <harald.linden@7183.org> Signed-off-by:
-
Du, Changbin authored
commit d8f00cd6 upstream. In function usb_reset_and_verify_device, the old BOS descriptor may still be used before allocating a new one. (usb_unlocked_disable_lpm function uses it under the situation that it fails to disable lpm.) So we cannot set the udev->bos to NULL before that, just keep what it was. It will be overwrite when allocating a new one. Crash log: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: [<ffffffff8171f98d>] usb_enable_link_state+0x2d/0x2f0 Call Trace: [<ffffffff8171ed5b>] ? usb_set_lpm_timeout+0x12b/0x140 [<ffffffff8171fcd1>] usb_enable_lpm+0x81/0xa0 [<ffffffff8171fdd8>] usb_disable_lpm+0xa8/0xc0 [<ffffffff8171fe1c>] usb_unlocked_disable_lpm+0x2c/0x50 [<ffffffff81723933>] usb_reset_and_verify_device+0xc3/0x710 [<ffffffff8172c4ed>] ? usb_sg_wait+0x13d/0x190 [<ffffffff81724743>] usb_reset_device+0x133/0x280 [<ffffffff8179ccd1>] usb_stor_port_reset+0x61/0x70 [<ffffffff8179cd68>] usb_stor_invoke_transport+0x88/0x520 Signed-off-by:
Du, Changbin <changbin.du@intel.com> Signed-off-by:
-
Johan Hovold authored
commit cac9b50b upstream. Fix null-pointer dereference at probe should a (malicious) Treo device lack the expected endpoints. Specifically, the Treo port-setup hack was dereferencing the bulk-in and interrupt-in urbs without first making sure they had been allocated by core. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Vladis Dronov authored
commit cb323213 upstream. The visor driver crashes in clie_5_attach() when a specially crafted USB device without bulk-out endpoint is detected. This fix adds a check that the device has proper configuration expected by the driver. Reported-by:
Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by:
Vladis Dronov <vdronov@redhat.com> Fixes: cfb8da8f ("USB: visor: fix initialisation of UX50/TH55 devices") Signed-off-by:
-
Bard Liao authored
commit b28785fa upstream. The shift bit of IN1 boost gain control is 12. Signed-off-by:
Bard Liao <bardliao@realtek.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
commit ac75fe5d upstream. That prevents this bug: [ 2382.269496] BUG: unable to handle kernel NULL pointer dereference at 0000000000000540 [ 2382.270013] IP: [<ffffffffa01fe616>] snd_card_free+0x36/0x70 [snd] [ 2382.270013] PGD 0 [ 2382.270013] Oops: 0002 [#1] SMP [ 2382.270013] Modules linked in: saa7134_alsa(-) tda1004x saa7134_dvb videobuf2_dvb dvb_core tda827x tda8290 tuner saa7134 tveeprom videobuf2_dma_sg videobuf2_memops videobuf2_v4l2 videobuf2_core v4l2_common videodev media auth_rpcgss nfsv4 dns_resolver nfs lockd grace sunrpc tun bridge stp llc ebtables ip6table_filter ip6_tables nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack it87 hwmon_vid snd_hda_codec_idt snd_hda_codec_generic iTCO_wdt iTCO_vendor_support snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq pcspkr i2c_i801 snd_seq_device snd_pcm snd_timer lpc_ich snd mfd_core soundcore binfmt_misc i915 video i2c_algo_bit drm_kms_helper drm r8169 ata_generic serio_raw pata_acpi mii i2c_core [last unloaded: videobuf2_memops] [ 2382.270013] CPU: 0 PID: 4899 Comm: rmmod Not tainted 4.5.0-rc1+ #4 [ 2382.270013] Hardware name: PCCHIPS P17G/P17G, BIOS 080012 05/14/2008 [ 2382.270013] task: ffff880039c38000 ti: ffff88003c764000 task.ti: ffff88003c764000 [ 2382.270013] RIP: 0010:[<ffffffffa01fe616>] [<ffffffffa01fe616>] snd_card_free+0x36/0x70 [snd] [ 2382.270013] RSP: 0018:ffff88003c767ea0 EFLAGS: 00010286 [ 2382.270013] RAX: ffff88003c767eb8 RBX: 0000000000000000 RCX: 0000000000006260 [ 2382.270013] RDX: ffffffffa020a060 RSI: ffffffffa0206de1 RDI: ffff88003c767eb0 [ 2382.270013] RBP: ffff88003c767ed8 R08: 0000000000019960 R09: ffffffff811a5412 [ 2382.270013] R10: ffffea0000d7c200 R11: 0000000000000000 R12: ffff88003c767ea8 [ 2382.270013] R13: 00007ffe760617f7 R14: 0000000000000000 R15: 0000557625d7f1e0 [ 2382.270013] FS: 00007f80bb1c0700(0000) GS:ffff88003f400000(0000) knlGS:0000000000000000 [ 2382.270013] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 2382.270013] CR2: 0000000000000540 CR3: 000000003c00f000 CR4: 00000000000006f0 [ 2382.270013] Stack: [ 2382.270013] 000000003c767ed8 ffffffff00000000 ffff880000000000 ffff88003c767eb8 [ 2382.270013] ffff88003c767eb8 ffffffffa049a890 00007ffe76060060 ffff88003c767ef0 [ 2382.270013] ffffffffa049889d ffffffffa049a500 ffff88003c767f48 ffffffff8111079c [ 2382.270013] Call Trace: [ 2382.270013] [<ffffffffa049889d>] saa7134_alsa_exit+0x1d/0x780 [saa7134_alsa] [ 2382.270013] [<ffffffff8111079c>] SyS_delete_module+0x19c/0x1f0 [ 2382.270013] [<ffffffff8170fc2e>] entry_SYSCALL_64_fastpath+0x12/0x71 [ 2382.270013] Code: 20 a0 48 c7 c6 e1 6d 20 a0 48 89 e5 41 54 53 4c 8d 65 d0 48 89 fb 48 83 ec 28 c7 45 d0 00 00 00 00 49 8d 7c 24 08 e8 7a 55 ed e0 <4c> 89 a3 40 05 00 00 48 89 df e8 eb fd ff ff 85 c0 75 1a 48 8d [ 2382.270013] RIP [<ffffffffa01fe616>] snd_card_free+0x36/0x70 [snd] [ 2382.270013] RSP <ffff88003c767ea0> [ 2382.270013] CR2: 0000000000000540 Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Takashi Iwai authored
commit ddce57a6 upstream. Currently the selected timer backend is referred at any moment from the running PCM callbacks. When the backend is switched, it's possible to lead to inconsistency from the running backend. This was pointed by syzkaller fuzzer, and the commit [7ee96216: ALSA: dummy: Disable switching timer backend via sysfs] disabled the dynamic switching for avoiding the crash. This patch improves the handling of timer backend switching. It keeps the reference to the selected backend during the whole operation of an opened stream so that it won't be changed by other streams. Together with this change, the hrtimer parameter is reenabled as writable now. NOTE: this patch also turned out to fix the still remaining race. Namely, ops was still replaced dynamically at dummy_pcm_open: static int dummy_pcm_open(struct snd_pcm_substream *substream) { .... dummy->timer_ops = &dummy_systimer_ops; if (hrtimer) dummy->timer_ops = &dummy_hrtimer_ops; Since dummy->timer_ops is common among all streams, and when the replacement happens during accesses of other streams, it may lead to a crash. This was actually triggered by syzkaller fuzzer and KASAN. This patch rewrites the code not to use the ops shared by all streams any longer, too. BugLink: http://lkml.kernel.org/r/CACT4Y+aZ+xisrpuM6cOXbL21DuM0yVxPYXf4cD4Md9uw0C3dBQ@mail.gmail.comReported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 2ebab40e upstream. The hda_jack_tbl entries are managed by snd_array for allowing multiple jacks. It's good per se, but the problem is that struct hda_jack_callback keeps the hda_jack_tbl pointer. Since snd_array doesn't preserve each pointer at resizing the array, we can't keep the original pointer but have to deduce the pointer at each time via snd_array_entry() instead. Actually, this resulted in the deference to the wrong pointer on codecs that have many pins such as CS4208. This patch replaces the pointer to the NID value as the search key. As an unexpected good side effect, this even simplifies the code, as only NID is needed in most cases. Signed-off-by:
-
Takashi Iwai authored
commit c44d9b11 upstream. Some Sony VAIO AiO models (VGC-JS4EF and VGC-JS25G, both with PCI SSID 104d:9044) need the same quirk to make the speaker working properly. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=112031Signed-off-by:
-
Takashi Iwai authored
commit 6c361d10 upstream. This reverts commit 0c25ad80. The original commit disabled the aamixer path due to the noise problem, but it turned out that some mobo with the same PCI SSID doesn't suffer from the issue, and the disabled function (analog loopback) is still demanded by users. Since the recent commit [e7fdd527: ALSA: hda - Implement loopback control switch for Realtek and other codecs], we have the dynamic mixer switch to enable/disable the aamix path, and we don't have to disable the path statically any longer. So, let's revert the disablement, so that only the user suffering from the noise problem can turn off the aamix on the fly. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=108301 Reported-by: <mutedbytes@gmail.com> Signed-off-by:
-
David Henningsson authored
commit 360a8245 upstream. The static checker warning is: sound/pci/hda/patch_hdmi.c:460 hdmi_eld_ctl_get() error: __memcpy() 'eld->eld_buffer' too small (256 vs 512) I have a hard time figuring out if this can ever cause an information leak (I don't think so), but nonetheless it does not hurt to increase the robustness of the code. Fixes: 68e03de9 ('ALSA: hda - hdmi: Do not expose eld data when eld is invalid') Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
-
Takashi Iwai authored
commit 2154cc0e upstream. Mac Mini 7,1 model with CS4208 codec reports the headphone jack detection wrongly in an inverted way. Moreover, the advertised pins for the audio input and SPDIF output have actually no jack detection. This patch addresses these issues. The inv_jack_detect flag is set for fixing the headphone jack detection, and the pin configs for audio input and SPDIF output are marked as non-detectable. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=105161 Report-and-tested-by: moosotc@gmail.com Signed-off-by:
-
Takashi Iwai authored
commit ed8b1d6d upstream. A slave timer element also unlinks at snd_timer_stop() but it takes only slave_active_lock. When a slave is assigned to a master, however, this may become a race against the master's interrupt handling, eventually resulting in a list corruption. The actual bug could be seen with a syzkaller fuzzer test case in BugLink below. As a fix, we need to take timeri->timer->lock when timer isn't NULL, i.e. assigned to a master, while the assignment to a master itself is protected by slave_active_lock. BugLink: http://lkml.kernel.org/r/CACT4Y+Y_Bm+7epAb=8Wi=AaWd+DYS7qawX52qxdCfOfY49vozQ@mail.gmail.comSigned-off-by:
-
Takashi Iwai authored
commit 117159f0 upstream. In snd_timer_notify1(), the wrong timer instance was passed for slave ccallback function. This leads to the access to the wrong data when an incompatible master is handled (e.g. the master is the sequencer timer and the slave is a user timer), as spotted by syzkaller fuzzer. This patch fixes that wrong assignment. BugLink: http://lkml.kernel.org/r/CACT4Y+Y_Bm+7epAb=8Wi=AaWd+DYS7qawX52qxdCfOfY49vozQ@mail.gmail.comReported-by:
-
Takashi Iwai authored
commit 4dff5c7b upstream. snd_timer_user_read() has a potential race among parallel reads, as qhead and qused are updated outside the critical section due to copy_to_user() calls. Move them into the critical section, and also sanitize the relevant code a bit. Signed-off-by:
-
Takashi Iwai authored
commit f784beb7 upstream. Although ALSA timer code got hardening for races, it still causes use-after-free error. This is however rather a corrupted linked list, not actually the concurrent accesses. Namely, when timer start is triggered twice, list_add_tail() is called twice, too. This ends up with the link corruption and triggers KASAN error. The simplest fix would be replacing list_add_tail() with list_move_tail(), but fundamentally it's the problem that we don't check the double start/stop correctly. So, the right fix here is to add the proper checks to snd_timer_start() and snd_timer_stop() (and their variants). BugLink: http://lkml.kernel.org/r/CACT4Y+ZyPRoMQjmawbvmCEDrkBD2BQuH7R09=eOkf5ESK8kJAw@mail.gmail.comReported-by:
-
Takashi Iwai authored
commit 094fd3be upstream. In ALSA timer core, the active timer instance is managed in active_list linked list. Each element is added / removed dynamically at timer start, stop and in timer interrupt. The problem is that snd_timer_interrupt() has a thinko and leaves the element in active_list when it's the last opened element. This eventually leads to list corruption or use-after-free error. This hasn't been revealed because we used to delete the list forcibly in snd_timer_stop() in the past. However, the recent fix avoids the double-stop behavior (in commit [f784beb7: ALSA: timer: Fix link corruption due to double start or stop]), and this leak hits reality. This patch fixes the link management in snd_timer_interrupt(). Now it simply unlinks no matter which stream is. BugLink: http://lkml.kernel.org/r/CACT4Y+Yy2aukHP-EDp8-ziNqNNmb-NTf=jDWXMP7jB8HDa2vng@mail.gmail.comReported-by:
-
Takashi Iwai authored
commit c3b16813 upstream. This is a minor code cleanup without any functional changes: - Kill keep_flag argument from _snd_timer_stop(), as all callers pass only it false. - Remove redundant NULL check in _snd_timer_stop(). Signed-off-by:
-
Takashi Iwai authored
commit 7f0973e9 upstream. The port subscription code uses double mutex locks for source and destination ports, and this may become racy once when wrongly set up. It leads to lockdep warning splat, typically triggered by fuzzer like syzkaller, although the actual deadlock hasn't been seen, so far. This patch simplifies the handling by reducing to two single locks, so that no lockdep warning will be trigger any longer. By splitting to two actions, a still-in-progress element shall be added in one list while handling another. For ignoring this element, a new check is added in deliver_to_subscribers(). Along with it, the code to add/remove the subscribers list element was cleaned up and refactored. BugLink: http://lkml.kernel.org/r/CACT4Y+aKQXV7xkBW9hpQbzaDO7LrUvohxWh-UwMxXjDy-yBD=A@mail.gmail.comReported-by:
-
Takashi Iwai authored
commit 2d1b5c08 upstream. The virmidi driver has an open race at closing its assigned rawmidi device, and this may lead to use-after-free in snd_seq_deliver_single_event(). Plug the hole by properly protecting the linked list deletion and calling in the right order in snd_virmidi_input_close(). BugLink: http://lkml.kernel.org/r/CACT4Y+Zd66+w12fNN85-425cVQT=K23kWbhnCEcMB8s3us-Frw@mail.gmail.comReported-by:
-
Takashi Iwai authored
commit 2cdc7b63 upstream. ALSA sequencer may open/close and control ALSA timer instance dynamically either via sequencer events or direct ioctls. These are done mostly asynchronously, and it may call still some timer action like snd_timer_start() while another is calling snd_timer_close(). Since the instance gets removed by snd_timer_close(), it may lead to a use-after-free. This patch tries to address such a race by protecting each snd_timer_*() call via the existing spinlock and also by avoiding the access to timer during close call. BugLink: http://lkml.kernel.org/r/CACT4Y+Z6RzW5MBr-HUdV-8zwg71WQfKTdPpYGvOeS7v4cyurNQ@mail.gmail.comReported-by:
-
Vinod Koul authored
commit 5e82d2be upstream. While performing hw_free, DPCM checks the BE state but leaves out the suspend state. The suspend state needs to be checked as well, as we might be suspended and then usermode closes rather than resuming the audio stream. This was found by a stress testing of system with playback in loop and killed after few seconds running in background and second script running suspend-resume test in loop Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Acked-by:
Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by:
-
Takashi Iwai authored
commit b2483716 upstream. There are potential deadlocks in PCM OSS emulation code while accessing read/write and mmap concurrently. This comes from the infamous mmap_sem usage in copy_from/to_user(). Namely, snd_pcm_oss_write() -> &runtime->oss.params_lock -> copy_to_user() -> &mm->mmap_sem mmap() -> &mm->mmap_sem -> snd_pcm_oss_mmap() -> &runtime->oss.params_lock Since we can't avoid taking params_lock from mmap code path, use trylock variant and aborts with -EAGAIN as a workaround of this AB/BA deadlock. BugLink: http://lkml.kernel.org/r/CACT4Y+bVrBKDG0G2_AcUgUQa+X91VKTeS4v+wN7BSHwHtqn3kQ@mail.gmail.comReported-by:
-
Kailang Yang authored
commit cfc5a845 upstream. Dell create new platform with ALC298 codec. This patch will enable headset mode for ALC225/ALC3253 platform. Signed-off-by:
Kailang Yang <kailang@realtek.com> Signed-off-by:
-
Kailang Yang authored
commit 4cc9b9d6 upstream. Support headset mode for ALC225 platforms. Signed-off-by:
-
Kailang Yang authored
commit 4231430d upstream. Add new support for ALC225, yet another variant of ALC298 codec. Signed-off-by:
-
Takashi Iwai authored
commit 81f57754 upstream. The rawmidi read and write functions manage runtime stream status such as runtime->appl_ptr and runtime->avail. These point where to copy the new data and how many bytes have been copied (or to be read). The problem is that rawmidi read/write call copy_from_user() or copy_to_user(), and the runtime spinlock is temporarily unlocked and relocked while copying user-space. Since the current code advances and updates the runtime status after the spin unlock/relock, the copy and the update may be asynchronous, and eventually runtime->avail might go to a negative value when many concurrent accesses are done. This may lead to memory corruption in the end. For fixing this race, in this patch, the status update code is performed in the same lock before the temporary unlock. Also, the spinlock is now taken more widely in snd_rawmidi_kernel_read1() for protecting more properly during the whole operation. BugLink: http://lkml.kernel.org/r/CACT4Y+b-dCmNf1GpgPKfDO0ih+uZCL2JV4__j-r1kdhPLSgQCQ@mail.gmail.comReported-by:
-
Takashi Iwai authored
commit cc85f7a6 upstream. NULL user-space buffer can be passed even in a normal path, thus it's not good to spew a kernel warning with stack trace at each time. Just drop snd_BUG_ON() macro usage there. BugLink: http://lkml.kernel.org/r/CACT4Y+YfVJ3L+q0i-4vyQVyyPD7V=OMX0PWPi29x9Bo3QaBLdw@mail.gmail.comReported-by:
-
Takashi Iwai authored
commit 06ab3003 upstream. A kernel WARNING in snd_rawmidi_transmit_ack() is triggered by syzkaller fuzzer: WARNING: CPU: 1 PID: 20739 at sound/core/rawmidi.c:1136 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff82999e2d>] dump_stack+0x6f/0xa2 lib/dump_stack.c:50 [<ffffffff81352089>] warn_slowpath_common+0xd9/0x140 kernel/panic.c:482 [<ffffffff813522b9>] warn_slowpath_null+0x29/0x30 kernel/panic.c:515 [<ffffffff84f80bd5>] snd_rawmidi_transmit_ack+0x275/0x400 sound/core/rawmidi.c:1136 [<ffffffff84fdb3c1>] snd_virmidi_output_trigger+0x4b1/0x5a0 sound/core/seq/seq_virmidi.c:163 [< inline >] snd_rawmidi_output_trigger sound/core/rawmidi.c:150 [<ffffffff84f87ed9>] snd_rawmidi_kernel_write1+0x549/0x780 sound/core/rawmidi.c:1223 [<ffffffff84f89fd3>] snd_rawmidi_write+0x543/0xb30 sound/core/rawmidi.c:1273 [<ffffffff817b0323>] __vfs_write+0x113/0x480 fs/read_write.c:528 [<ffffffff817b1db7>] vfs_write+0x167/0x4a0 fs/read_write.c:577 [< inline >] SYSC_write fs/read_write.c:624 [<ffffffff817b50a1>] SyS_write+0x111/0x220 fs/read_write.c:616 [<ffffffff86336c36>] entry_SYSCALL_64_fastpath+0x16/0x7a arch/x86/entry/entry_64.S:185 Also a similar warning is found but in another path: Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff82be2c0d>] dump_stack+0x6f/0xa2 lib/dump_stack.c:50 [<ffffffff81355139>] warn_slowpath_common+0xd9/0x140 kernel/panic.c:482 [<ffffffff81355369>] warn_slowpath_null+0x29/0x30 kernel/panic.c:515 [<ffffffff8527e69a>] rawmidi_transmit_ack+0x24a/0x3b0 sound/core/rawmidi.c:1133 [<ffffffff8527e851>] snd_rawmidi_transmit_ack+0x51/0x80 sound/core/rawmidi.c:1163 [<ffffffff852d9046>] snd_virmidi_output_trigger+0x2b6/0x570 sound/core/seq/seq_virmidi.c:185 [< inline >] snd_rawmidi_output_trigger sound/core/rawmidi.c:150 [<ffffffff85285a0b>] snd_rawmidi_kernel_write1+0x4bb/0x760 sound/core/rawmidi.c:1252 [<ffffffff85287b73>] snd_rawmidi_write+0x543/0xb30 sound/core/rawmidi.c:1302 [<ffffffff817ba5f3>] __vfs_write+0x113/0x480 fs/read_write.c:528 [<ffffffff817bc087>] vfs_write+0x167/0x4a0 fs/read_write.c:577 [< inline >] SYSC_write fs/read_write.c:624 [<ffffffff817bf371>] SyS_write+0x111/0x220 fs/read_write.c:616 [<ffffffff86660276>] entry_SYSCALL_64_fastpath+0x16/0x7a arch/x86/entry/entry_64.S:185 In the former case, the reason is that virmidi has an open code calling snd_rawmidi_transmit_ack() with the value calculated outside the spinlock. We may use snd_rawmidi_transmit() in a loop just for consuming the input data, but even there, there is a race between snd_rawmidi_transmit_peek() and snd_rawmidi_tranmit_ack(). Similarly in the latter case, it calls snd_rawmidi_transmit_peek() and snd_rawmidi_tranmit_ack() separately without protection, so they are racy as well. The patch tries to address these issues by the following ways: - Introduce the unlocked versions of snd_rawmidi_transmit_peek() and snd_rawmidi_transmit_ack() to be called inside the explicit lock. - Rewrite snd_rawmidi_transmit() to be race-free (the former case). - Make the split calls (the latter case) protected in the rawmidi spin lock. BugLink: http://lkml.kernel.org/r/CACT4Y+YPq1+cYLkadwjWa5XjzF1_Vki1eHnVn-Lm0hzhSpu5PA@mail.gmail.com BugLink: http://lkml.kernel.org/r/CACT4Y+acG4iyphdOZx47Nyq_VHGbpJQK-6xNpiqUjaZYqsXOGw@mail.gmail.comReported-by:
-
Takashi Iwai authored
commit da10816e upstream. ALSA OSS sequencer spews a kernel error message ("ALSA: seq_oss: too many applications") when user-space tries to open more than the limit. This means that it can easily fill the log buffer. Since it's merely a normal error, it's safe to suppress it via pr_debug() instead. Signed-off-by:
-
