- 15 Dec, 2020 40 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound updates from Takashi Iwai: "Lots of changes (slightly more code increase than usual) at this time, while most of code changes are ASoC driver-specific. Here are some highlights: Core: - The new auxiliary bus implementation for Intel DSP, which will be used by other drivers as well - Lots of ASoC core cleanups and refactoring - UBSAN and KCSAN fixes in rawmidi, sequencer and a few others - Compress-offload API enhancement for the pause during draining HD- and USB-audio: - Enhancements of the USB-audio implicit feedback support, including better full-duplex operations - Continued CA0132 improvements and fixes - A few new quirk entries, HDMI audio fixes ASoC: - Support for boot time selection of Intel DSP firmware, which should help distros/users testing new stuff more easily; the kconfig was moved to boot time option, too - Some basic DPCM support in audio graph card - Removal of old pre-DT Freescale drivers - Support for Allwinner H6 I2S, Analog Devices ADAU1372, Intel Alderlake-S, GMediatek MT8192, NXP i.MX HDMI and XCVR, Realtek RT715, Qualcomm SM8250 and simple GPIO based muxes" * tag 'sound-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (445 commits) ALSA: pcm: oss: Fix potential out-of-bounds shift ALSA: usb-audio: Fix potential out-of-bounds shift ALSA: hda/ca0132 - Add ZxR surround DAC setup. ALSA: hda/ca0132 - Add 8051 PLL write helper functions. ALSA: hda/hdmi: packet buffer index must be set before reading value ASoC: SOF: imx: update kernel-doc description ASoC: mediatek: mt8183: delete some unreachable code ASoC: mediatek: mt8183: add PM ops to machine drivers ASoC: topology: Fix wrong size check ASoC: topology: Add missing size check ASoC: SOF: Intel: hda: fix the condition passed to sof_dev_dbg_or_err ASoC: SOF: modify the SOF_DBG flags ASoC: SOF: Intel: hda: remove duplicated status dump ASoC: rt1015p: delay 300ms after SDB pulling high for calibration ASoC: rt1015p: move SDB control from trigger to DAPM ASoC: wm_adsp: remove "ctl" from list on error in wm_adsp_create_control() ALSA: usb-audio: Fix control 'access overflow' errors from chmap ALSA: hda/hdmi: always print pin NIDs as hexadecimal ALSA: hda/realtek - Add supported for more Lenovo ALC285 Headset Button ALSA: hda/ca0132 - Remove now unnecessary DSP setup functions. ... -
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds authored
Pull networking updates from Jakub Kicinski: "Core: - support "prefer busy polling" NAPI operation mode, where we defer softirq for some time expecting applications to periodically busy poll - AF_XDP: improve efficiency by more batching and hindering the adjacency cache prefetcher - af_packet: make packet_fanout.arr size configurable up to 64K - tcp: optimize TCP zero copy receive in presence of partial or unaligned reads making zero copy a performance win for much smaller messages - XDP: add bulk APIs for returning / freeing frames - sched: support fragmenting IP packets as they come out of conntrack - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs BPF: - BPF switch from crude rlimit-based to memcg-based memory accounting - BPF type format information for kernel modules and related tracing enhancements - BPF implement task local storage for BPF LSM - allow the FENTRY/FEXIT/RAW_TP tracing programs to use bpf_sk_storage Protocols: - mptcp: improve multiple xmit streams support, memory accounting and many smaller improvements - TLS: support CHACHA20-POLY1305 cipher - seg6: add support for SRv6 End.DT4/DT6 behavior - sctp: Implement RFC 6951: UDP Encapsulation of SCTP - ppp_generic: add ability to bridge channels directly - bridge: Connectivity Fault Management (CFM) support as is defined in IEEE 802.1Q section 12.14. Drivers: - mlx5: make use of the new auxiliary bus to organize the driver internals - mlx5: more accurate port TX timestamping support - mlxsw: - improve the efficiency of offloaded next hop updates by using the new nexthop object API - support blackhole nexthops - support IEEE 802.1ad (Q-in-Q) bridging - rtw88: major bluetooth co-existance improvements - iwlwifi: support new 6 GHz frequency band - ath11k: Fast Initial Link Setup (FILS) - mt7915: dual band concurrent (DBDC) support - net: ipa: add basic support for IPA v4.5 Refactor: - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej Siewior - phy: add support for shared interrupts; get rid of multiple driver APIs and have the drivers write a full IRQ handler, slight growth of driver code should be compensated by the simpler API which also allows shared IRQs - add common code for handling netdev per-cpu counters - move TX packet re-allocation from Ethernet switch tag drivers to a central place - improve efficiency and rename nla_strlcpy - number of W=1 warning cleanups as we now catch those in a patchwork build bot Old code removal: - wan: delete the DLCI / SDLA drivers - wimax: move to staging - wifi: remove old WDS wifi bridging support" * tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits) net: hns3: fix expression that is currently always true net: fix proc_fs init handling in af_packet and tls nfc: pn533: convert comma to semicolon af_vsock: Assign the vsock transport considering the vsock address flags af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path vsock_addr: Check for supported flag values vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag vm_sockets: Add flags field in the vsock address data structure net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context nfc: s3fwrn5: Release the nfc firmware net: vxget: clean up sparse warnings mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3 mlxsw: spectrum_router_xm: Introduce basic XM cache flushing mlxsw: reg: Add Router LPM Cache Enable Register mlxsw: reg: Add Router LPM Cache ML Delete Register mlxsw: spectrum_router_xm: Implement L-value tracking for M-index mlxsw: reg: Add XM Router M Table Register ... -
Linus Torvalds authored
Merge misc updates from Andrew Morton: - a few random little subsystems - almost all of the MM patches which are staged ahead of linux-next material. I'll trickle to post-linux-next work in as the dependents get merged up. Subsystems affected by this patch series: kthread, kbuild, ide, ntfs, ocfs2, arch, and mm (slab-generic, slab, slub, dax, debug, pagecache, gup, swap, shmem, memcg, pagemap, mremap, hmm, vmalloc, documentation, kasan, pagealloc, memory-failure, hugetlb, vmscan, z3fold, compaction, oom-kill, migration, cma, page-poison, userfaultfd, zswap, zsmalloc, uaccess, zram, and cleanups). * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (200 commits) mm: cleanup kstrto*() usage mm: fix fall-through warnings for Clang mm: slub: convert sysfs sprintf family to sysfs_emit/sysfs_emit_at mm: shmem: convert shmem_enabled_show to use sysfs_emit_at mm:backing-dev: use sysfs_emit in macro defining functions mm: huge_memory: convert remaining use of sprintf to sysfs_emit and neatening mm: use sysfs_emit for struct kobject * uses mm: fix kernel-doc markups zram: break the strict dependency from lzo zram: add stat to gather incompressible pages since zram set up zram: support page writeback mm/process_vm_access: remove redundant initialization of iov_r mm/zsmalloc.c: rework the list_add code in insert_zspage() mm/zswap: move to use crypto_acomp API for hardware acceleration mm/zswap: fix passing zero to 'PTR_ERR' warning mm/zswap: make struct kernel_param_ops definitions const userfaultfd/selftests: hint the test runner on required privilege userfaultfd/selftests: fix retval check for userfaultfd_open() userfaultfd/selftests: always dump something in modes userfaultfd: selftests: make __{s,u}64 format specifiers portable ... -
Alexey Dobriyan authored
Range checks can folded into proper conversion function. kstrto*() exist for all arithmetic types. Link: https://lkml.kernel.org/r/20201122123759.GC92364@localhost.localdomainSigned-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix a couple of warnings by explicitly adding a break statement instead of just letting the code fall through to the next, and by adding a fallthrough pseudo-keyword in places where the code is intended to fall through. Link: https://github.com/KSPP/linux/issues/115 Link: https://lkml.kernel.org/r/f5756988b8842a3f10008fbc5b0a654f828920a9.1605896059.git.gustavoars@kernel.orgSigned-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Joe Perches authored
Convert the unbounded uses of sprintf to sysfs_emit. A few conversions may now not end in a newline if the output buffer is overflowed. Link: https://lkml.kernel.org/r/0c90a90f466167f8c37de4b737553cf49c4a277f.1605376435.git.joe@perches.comSigned-off-by:
Joe Perches <joe@perches.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
Joe Perches authored
Update the function to use sysfs_emit_at while neatening the uses of sprintf and overwriting the last space char with a newline to avoid possible output buffer overflow. Miscellanea: - in shmem_enabled_show, the removal of the indirected use of fmt allows __printf verification Link: https://lkml.kernel.org/r/b612a93825e5ea330cb68d2e8b516e9687a06cc6.1605376435.git.joe@perches.comSigned-off-by:
-
Joe Perches authored
The cocci script used in commit bdacbb8d04f ("mm: Use sysfs_emit for struct kobject * uses") does not convert the name##_show macro because the macro uses concatenation via ##. Convert it by hand. Link: https://lkml.kernel.org/r/45ec6cfc177d743f9c0ebaf35e43969dce43af42.1605376435.git.joe@perches.comSigned-off-by: -
Joe Perches authored
Convert the only use of sprintf with struct kobject * that the cocci script could not convert. Miscellanea: - Neaten the uses of a constant string with sysfs_emit to use a const char * to reduce overall object size Link: https://lkml.kernel.org/r/7df6be66bbd68e1a0bca9d35aca1341dbf94d2a7.1605376435.git.joe@perches.comSigned-off-by:
-
Joe Perches authored
Patch series "mm: Convert sysfs sprintf family to sysfs_emit", v2. Use the new sysfs_emit family and not the sprintf family. This patch (of 5): Use the sysfs_emit function instead of the sprintf family. Done with cocci script as in commit 3c6bff3c ("RDMA: Convert sysfs kobject * show functions to use sysfs_emit()") Link: https://lkml.kernel.org/r/cover.1605376435.git.joe@perches.com Link: https://lkml.kernel.org/r/9c249215bad6df616ba0410ad980042694970c1b.1605376435.git.joe@perches.comSigned-off-by:
-
Mauro Carvalho Chehab authored
Kernel-doc markups should use this format: identifier - description Fix some issues on mm files: 1) The definition for get_user_pages_locked() doesn't follow it. Also, it expects a short descrpition at the header, followed by a long one, after the parameters. Fix it. 2) Kernel-doc requires that a kernel-doc markup to be immediately below the function prototype, as otherwise it will rename it. So, move get_pfnblock_flags_mask() description to the right place. 3) Make invalidate_mapping_pagevec() to also follow the expected kernel-doc format. While here, fix a few minor English syntax issues, as suggested by Matthew: will used -> will be used similar with -> similar to Link: https://lkml.kernel.org/r/80e85dddc92d333bc2159ee8a2294921612e8745.1605521731.git.mchehab+huawei@kernel.orgSigned-off-by:Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Suggested-by: Mattew Wilcox <willy@infradead.org> [English fixes] Signed-off-by:
-
Rui Salvaterra authored
From the beginning, the zram block device always enabled CRYPTO_LZO, since lzo-rle is hardcoded as the fallback compression algorithm. As a consequence, on systems where another compression algorithm is chosen (e.g. CRYPTO_ZSTD), the lzo kernel module becomes unused, while still having to be built/loaded. This patch removes the hardcoded lzo-rle dependency and allows the user to select the default compression algorithm for zram at build time. The previous behaviour is kept, as the default algorithm is still lzo-rle. Link: https://lkml.kernel.org/r/20201207121245.50529-1-rsalvaterra@gmail.comSigned-off-by:
Rui Salvaterra <rsalvaterra@gmail.com> Suggested-by:
Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Suggested-by:
Minchan Kim <minchan@kernel.org> Acked-by:
-
Minchan Kim authored
Currently, zram supports the stat via /sys/block/zram/mm_stat to represent how many of incompressible pages are stored at the moment but it couldn't show how many times incompressible pages were wrote down since zram set up. It's also good indication to see how zram is effective in the system. Link: https://lkml.kernel.org/r/20201130201907.1284910-1-minchan@kernel.orgSigned-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
-
Minchan Kim authored
There is demand to writeback specific process pages to backing store instead of all idles pages in the system due to storage wear out concerns and to launching latency of apps which are most of the time idle but are critical for resume latency. This patch extends the writeback knob to support a specific page writeback. Link: https://lkml.kernel.org/r/20201020190506.3758660-1-minchan@kernel.orgSigned-off-by:
-
Colin Ian King authored
The pointer iov_r is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Link: https://lkml.kernel.org/r/20201102120614.694917-1-colin.king@canonical.comSigned-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
-
Miaohe Lin authored
Rework the list_add code to make it more readable and simple. Link: https://lkml.kernel.org/r/20201015130107.65195-1-linmiaohe@huawei.comSigned-off-by:
Miaohe Lin <linmiaohe@huawei.com> Acked-by:
-
Barry Song authored
Right now, all new ZIP drivers are adapted to crypto_acomp APIs rather than legacy crypto_comp APIs. Tradiontal ZIP drivers like lz4,lzo etc have been also wrapped into acomp via scomp backend. But zswap.c is still using the old APIs. That means zswap won't be able to work on any new ZIP drivers in kernel. This patch moves to use cryto_acomp APIs to fix the disconnected bridge between new ZIP drivers and zswap. It is probably the first real user to use acomp but perhaps not a good example to demonstrate how multiple acomp requests can be executed in parallel in one acomp instance. frontswap is doing page load and store page by page synchronously. swap_writepage() depends on the completion of frontswap_store() to decide if it should call __swap_writepage() to swap to disk. However this patch creates multiple acomp instances, so multiple threads running on multiple different cpus can actually do (de)compression parallelly, leveraging the power of multiple ZIP hardware queues. This is also consistent with frontswap's page management model. The old zswap code uses atomic context and avoids the race conditions while shared resources like zswap_dstmem are accessed. Here since acomp can sleep, per-cpu mutex is used to replace preemption-disable. While it is possible to make mm/page_io.c and mm/frontswap.c support async (de)compression in some way, the entire design requires careful thinking and performance evaluation. For the first step, the base with fixed connection between ZIP drivers and zswap should be built. Link: https://lkml.kernel.org/r/20201107065332.26992-1-song.bao.hua@hisilicon.comSigned-off-by:
Barry Song <song.bao.hua@hisilicon.com> Acked-by:
Vitaly Wool <vitalywool@gmail.com> Cc: Luis Claudio R. Goncalves <lgoncalv@redhat.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Mahipal Challa <mahipalreddy2006@gmail.com> Cc: Seth Jennings <sjenning@redhat.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Zhou Wang <wangzhou1@hisilicon.com> Cc: Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
YueHaibing authored
Fix smatch warning: mm/zswap.c:425 zswap_cpu_comp_prepare() warn: passing zero to 'PTR_ERR' crypto_alloc_comp() never return NULL, use IS_ERR instead of IS_ERR_OR_NULL to fix this. Link: https://lkml.kernel.org/r/20201031055615.28080-1-yuehaibing@huawei.com Fixes: f1c54846 ("zswap: dynamic pool creation") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Cc: Seth Jennings <sjenning@redhat.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Vitaly Wool <vitaly.wool@konsulko.com> Signed-off-by:
-
Joe Perches authored
These should be const, so make it so. Link: https://lkml.kernel.org/r/1791535ee0b00f4a5c68cc4a8adada06593ad8f1.1601770305.git.joe@perches.comSigned-off-by:
-
Peter Xu authored
Now userfaultfd test program requires either root or ptrace privilege due to the signal/event tests. When UFFDIO_API failed, hint the test runner about this fact verbosely. Link: https://lkml.kernel.org/r/20201208024709.7701-4-peterx@redhat.comSigned-off-by:
Peter Xu <peterx@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by:
-
Peter Xu authored
userfaultfd_open() returns 1 for errors rather than negatives. Fix it on all the callers so when UFFDIO_API failed the test will bail out. Link: https://lkml.kernel.org/r/20201208024709.7701-3-peterx@redhat.comSigned-off-by:
-
Peter Xu authored
Patch series "userfaultfd: selftests: Small fixes". Some very trivial fixes that I kept locally to userfaultfd selftest program. This patch (of 3): BOUNCE_POLL is a special bit that if cleared it means "READ" instead. Dump that too otherwise we'll see tests with empty modes. Link: https://lkml.kernel.org/r/20201208024709.7701-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20201208024709.7701-2-peterx@redhat.comSigned-off-by:
-
Axel Rasmussen authored
On certain platforms (powerpcle is the one on which I ran into this), "%Ld" and "%Lu" are unsuitable for printing __s64 and __u64, respectively, resulting in build warnings. Cast to {u,}int64_t, and use the PRI{d,u}64 macros defined in inttypes.h to print them. This ought to be portable to all platforms. Splitting this off into a separate macro lets us remove some lines, and get rid of some (I would argue) stylistically odd cases where we joined printf() and exit() into a single statement with a ,. Finally, this also fixes a "missing braces around initializer" warning when we initialize prms in wp_range(). [axelrasmussen@google.com: v2] Link: https://lkml.kernel.org/r/20201203180244.1811601-1-axelrasmussen@google.com Link: https://lkml.kernel.org/r/20201202211542.1121189-1-axelrasmussen@google.comSigned-off-by:Axel Rasmussen <axelrasmussen@google.com> Acked-by:
-
Lokesh Gidra authored
With this change, when the knob is set to 0, it allows unprivileged users to call userfaultfd, like when it is set to 1, but with the restriction that page faults from only user-mode can be handled. In this mode, an unprivileged user (without SYS_CAP_PTRACE capability) must pass UFFD_USER_MODE_ONLY to userfaultd or the API will fail with EPERM. This enables administrators to reduce the likelihood that an attacker with access to userfaultfd can delay faulting kernel code to widen timing windows for other exploits. The default value of this knob is changed to 0. This is required for correct functioning of pipe mutex. However, this will fail postcopy live migration, which will be unnoticeable to the VM guests. To avoid this, set 'vm.userfault = 1' in /sys/sysctl.conf. The main reason this change is desirable as in the short term is that the Android userland will behave as with the sysctl set to zero. So without this commit, any Linux binary using userfaultfd to manage its memory would behave differently if run within the Android userland. For more details, refer to Andrea's reply [1]. [1] https://lore.kernel.org/lkml/20200904033438.GI9411@redhat.com/ Link: https://lkml.kernel.org/r/20201120030411.2690816-3-lokeshgidra@google.comSigned-off-by:
Lokesh Gidra <lokeshgidra@google.com> Reviewed-by:
Andrea Arcangeli <aarcange@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Peter Xu <peterx@redhat.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Stephen Smalley <stephen.smalley.work@gmail.com> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Daniel Colascione <dancol@dancol.org> Cc: "Joel Fernandes (Google)" <joel@joelfernandes.org> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: <calin@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Shaohua Li <shli@fb.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Nitin Gupta <nigupta@nvidia.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Daniel Colascione <dancol@google.com> Signed-off-by:
-
Lokesh Gidra authored
Patch series "Control over userfaultfd kernel-fault handling", v6. This patch series is split from [1]. The other series enables SELinux support for userfaultfd file descriptors so that its creation and movement can be controlled. It has been demonstrated on various occasions that suspending kernel code execution for an arbitrary amount of time at any access to userspace memory (copy_from_user()/copy_to_user()/...) can be exploited to change the intended behavior of the kernel. For instance, handling page faults in kernel-mode using userfaultfd has been exploited in [2, 3]. Likewise, FUSE, which is similar to userfaultfd in this respect, has been exploited in [4, 5] for similar outcome. This small patch series adds a new flag to userfaultfd(2) that allows callers to give up the ability to handle kernel-mode faults with the resulting UFFD file object. It then adds a 'user-mode only' option to the unprivileged_userfaultfd sysctl knob to require unprivileged callers to use this new flag. The purpose of this new interface is to decrease the chance of an unprivileged userfaultfd user taking advantage of userfaultfd to enhance security vulnerabilities by lengthening the race window in kernel code. [1] https://lore.kernel.org/lkml/20200211225547.235083-1-dancol@google.com/ [2] https://duasynt.com/blog/linux-kernel-heap-spray [3] https://duasynt.com/blog/cve-2016-6187-heap-off-by-one-exploit [4] https://googleprojectzero.blogspot.com/2016/06/exploiting-recursion-in-linux-kernel_20.html [5] https://bugs.chromium.org/p/project-zero/issues/detail?id=808 This patch (of 2): userfaultfd handles page faults from both user and kernel code. Add a new UFFD_USER_MODE_ONLY flag for userfaultfd(2) that makes the resulting userfaultfd object refuse to handle faults from kernel mode, treating these faults as if SIGBUS were always raised, causing the kernel code to fail with EFAULT. A future patch adds a knob allowing administrators to give some processes the ability to create userfaultfd file objects only if they pass UFFD_USER_MODE_ONLY, reducing the likelihood that these processes will exploit userfaultfd's ability to delay kernel page faults to open timing windows for future exploits. Link: https://lkml.kernel.org/r/20201120030411.2690816-1-lokeshgidra@google.com Link: https://lkml.kernel.org/r/20201120030411.2690816-2-lokeshgidra@google.comSigned-off-by:
Daniel Colascione <dancol@google.com> Signed-off-by:
-
Vlastimil Babka authored
CONFIG_PAGE_POISONING_ZERO uses the zero pattern instead of 0xAA. It was introduced by commit 1414c7f4 ("mm/page_poisoning.c: allow for zero poisoning"), noting that using zeroes retains the benefit of sanitizing content of freed pages, with the benefit of not having to zero them again on alloc, and the downside of making some forms of corruption (stray writes of NULLs) harder to detect than with the 0xAA pattern. Together with CONFIG_PAGE_POISONING_NO_SANITY it made possible to sanitize the contents on free without checking it back on alloc. These days we have the init_on_free() option to achieve sanitization with zeroes and to save clearing on alloc (and without checking on alloc). Arguably if someone does choose to check the poison for corruption on alloc, the savings of not clearing the page are secondary, and it makes sense to always use the 0xAA poison pattern. Thus, remove the CONFIG_PAGE_POISONING_ZERO option for being redundant. Link: https://lkml.kernel.org/r/20201113104033.22907-6-vbabka@suse.czSigned-off-by:
Vlastimil Babka <vbabka@suse.cz> Acked-by:
-
Vlastimil Babka authored
CONFIG_PAGE_POISONING_NO_SANITY skips the check on page alloc whether the poison pattern was corrupted, suggesting a use-after-free. The motivation to introduce it in commit 8823b1db ("mm/page_poison.c: enable PAGE_POISONING as a separate option") was to simply sanitize freed pages, optimally together with CONFIG_PAGE_POISONING_ZERO. These days we have an init_on_free=1 boot option, which makes this use case of page poisoning redundant. For sanitizing, writing zeroes is sufficient, there is pretty much no benefit from writing the 0xAA poison pattern to freed pages, without checking it back on alloc. Thus, remove this option and suggest init_on_free instead in the main config's help. Link: https://lkml.kernel.org/r/20201113104033.22907-5-vbabka@suse.czSigned-off-by:
-
Vlastimil Babka authored
Page poisoning used to be incompatible with hibernation, as the state of poisoned pages was lost after resume, thus enabling CONFIG_HIBERNATION forces CONFIG_PAGE_POISONING_NO_SANITY. For the same reason, the poisoning with zeroes variant CONFIG_PAGE_POISONING_ZERO used to disable hibernation. The latter restriction was removed by commit 1ad1410f ("PM / Hibernate: allow hibernation with PAGE_POISONING_ZERO") and similarly for init_on_free by commit 18451f9f ("PM: hibernate: fix crashes with init_on_free=1") by making sure free pages are cleared after resume. We can use the same mechanism to instead poison free pages with PAGE_POISON after resume. This covers both zero and 0xAA patterns. Thus we can remove the Kconfig restriction that disables page poison sanity checking when hibernation is enabled. Link: https://lkml.kernel.org/r/20201113104033.22907-4-vbabka@suse.czSigned-off-by:
-
Vlastimil Babka authored
Commit 11c9c7ed ("mm/page_poison.c: replace bool variable with static key") changed page_poisoning_enabled() to a static key check. However, the function is not inlined, so each check still involves a function call with overhead not eliminated when page poisoning is disabled. Analogically to how debug_pagealloc is handled, this patch converts page_poisoning_enabled() back to boolean check, and introduces page_poisoning_enabled_static() for fast paths. Both functions are inlined. The function kernel_poison_pages() is also called unconditionally and does the static key check inside. Remove it from there and put it to callers. Also split it to two functions kernel_poison_pages() and kernel_unpoison_pages() instead of the confusing bool parameter. Also optimize the check that enables page poisoning instead of debug_pagealloc for architectures without proper debug_pagealloc support. Move the check to init_mem_debugging_and_hardening() to enable a single static key instead of having two static branches in page_poisoning_enabled_static(). Link: https://lkml.kernel.org/r/20201113104033.22907-3-vbabka@suse.czSigned-off-by:
-
Vlastimil Babka authored
Patch series "cleanup page poisoning", v3. I have identified a number of issues and opportunities for cleanup with CONFIG_PAGE_POISON and friends: - interaction with init_on_alloc and init_on_free parameters depends on the order of parameters (Patch 1) - the boot time enabling uses static key, but inefficienty (Patch 2) - sanity checking is incompatible with hibernation (Patch 3) - CONFIG_PAGE_POISONING_NO_SANITY can be removed now that we have init_on_free (Patch 4) - CONFIG_PAGE_POISONING_ZERO can be most likely removed now that we have init_on_free (Patch 5) This patch (of 5): Enabling page_poison=1 together with init_on_alloc=1 or init_on_free=1 produces a warning in dmesg that page_poison takes precedence. However, as these warnings are printed in early_param handlers for init_on_alloc/free, they are not printed if page_poison is enabled later on the command line (handlers are called in the order of their parameters), or when init_on_alloc/free is always enabled by the respective config option - before the page_poison early param handler is called, it is not considered to be enabled. This is inconsistent. We can remove the dependency on order by making the init_on_* parameters only set a boolean variable, and postponing the evaluation after all early params have been processed. Introduce a new init_mem_debugging_and_hardening() function for that, and move the related debug_pagealloc processing there as well. As a result init_mem_debugging_and_hardening() knows always accurately if init_on_* and/or page_poison options were enabled. Thus we can also optimize want_init_on_alloc() and want_init_on_free(). We don't need to check page_poisoning_enabled() there, we can instead not enable the init_on_* static keys at all, if page poisoning is enabled. This results in a simpler and more effective code. Link: https://lkml.kernel.org/r/20201113104033.22907-1-vbabka@suse.cz Link: https://lkml.kernel.org/r/20201113104033.22907-2-vbabka@suse.czSigned-off-by:
Mike Rapoport <rppt@linux.ibm.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mateusz Nosek <mateusznosek0@gmail.com> Cc: Laura Abbott <labbott@kernel.org> Signed-off-by:
-
Charan Teja Reddy authored
It is required to print 'count' of pages, along with the pages, passed to cma_release to debug the cases of mismatched count value passed between cma_alloc() and cma_release() from a code path. As an example, consider the below scenario: 1) CMA pool size is 4MB and 2) User doing the erroneous step of allocating 2 pages but freeing 1 page in a loop from this CMA pool. The step 2 causes cma_alloc() to return NULL at one point of time because of -ENOMEM condition. And the current pr_debug logs is not giving the info about these types of allocation patterns because of count value not being printed in cma_release(). We are printing the count value in the trace logs, just extend the same to pr_debug logs too. [akpm@linux-foundation.org: fix printk warning] Link: https://lkml.kernel.org/r/1606318341-29521-1-git-send-email-charante@codeaurora.orgSigned-off-by:
Charan Teja Reddy <charante@codeaurora.org> Reviewed-by:
Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by:
-
Lecopzer Chen authored
The cma_mutex which protects alloc_contig_range() was first appeared in commit 7ee793a6 ("cma: Remove potential deadlock situation"), at that time, there is no guarantee the behavior of concurrency inside alloc_contig_range(). After commit 2c7452a0 ("mm/page_isolation.c: make start_isolate_page_range() fail if already isolated") > However, two subsystems (CMA and gigantic > huge pages for example) could attempt operations on the same range. If > this happens, one thread may 'undo' the work another thread is doing. > This can result in pageblocks being incorrectly left marked as > MIGRATE_ISOLATE and therefore not available for page allocation. The concurrency inside alloc_contig_range() was clarified. Now we can find that hugepage and virtio call alloc_contig_range() without any lock, thus cma_mutex is "redundant" in cma_alloc() now. Link: https://lkml.kernel.org/r/20201020102241.3729-1-lecopzer.chen@mediatek.comSigned-off-by:
Lecopzer Chen <lecopzer.chen@mediatek.com> Acked-by:
-
Stephen Zhang authored
"dst" parameter to migrate_vma_insert_page() is not used anymore. Link: https://lkml.kernel.org/r/CANubcdUwCAMuUyamG2dkWP=cqSR9MAS=tHLDc95kQkqU-rEnAg@mail.gmail.comSigned-off-by:
Stephen Zhang <starzhangzsd@gmail.com> Reviewed-by:
-
Yang Shi authored
In the current implementation unmap_and_move() would return -ENOMEM if THP migration is unsupported, then the THP will be split. If split is failed just exit without trying to migrate other pages. It doesn't make too much sense since there may be enough free memory to migrate other pages and there may be a lot base pages on the list. Return -ENOSYS to make consistent with hugetlb. And if THP split is failed just skip and try other pages on the list. Just skip the whole list and exit when free memory is really low. Link: https://lkml.kernel.org/r/20201113205359.556831-6-shy828301@gmail.comSigned-off-by:
Yang Shi <shy828301@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Song Liu <songliubraving@fb.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by:
-
Yang Shi authored
The migrate_prep{_local} never fails, so it is pointless to have return value and check the return value. Link: https://lkml.kernel.org/r/20201113205359.556831-5-shy828301@gmail.comSigned-off-by:Zi Yan <ziy@nvidia.com> Cc: Jan Kara <jack@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Song Liu <songliubraving@fb.com> Signed-off-by:
-
Yang Shi authored
The NUMA balancing skip shared exec base page. Since CONFIG_READ_ONLY_THP_FOR_FS was introduced, there are probably shared exec THP, so skip such THPs for NUMA balancing as well. And Willy's regular filesystem THP support patches could create shared exec THP wven without that config. In addition, the page_is_file_lru() is used to tell if the page is file cache or not, but it filters out shmem page. It sounds like a typical usecase by putting executables in shmem to achieve performance gain via using shmem-THP, so it sounds worth skipping migration for such case too. Link: https://lkml.kernel.org/r/20201113205359.556831-4-shy828301@gmail.comSigned-off-by:
-
Yang Shi authored
When unmap_and_move{_huge_page}() returns !-EAGAIN and !MIGRATEPAGE_SUCCESS, the page would be put back to LRU or proper list if it is non-LRU movable page. But, the callers always call putback_movable_pages() to put the failed pages back later on, so it seems not very efficient to put every single page back immediately, and the code looks convoluted. Put the failed page on a separate list, then splice the list to migrate list when all pages are tried. It is the caller's responsibility to call putback_movable_pages() to handle failures. This also makes the code simpler and more readable. After the change the rules are: * Success: non hugetlb page will be freed, hugetlb page will be put back * -EAGAIN: stay on the from list * -ENOMEM: stay on the from list * Other errno: put on ret_pages list then splice to from list The from list would be empty iff all pages are migrated successfully, it was not so before. This has no impact to current existing callsites. Link: https://lkml.kernel.org/r/20201113205359.556831-3-shy828301@gmail.comSigned-off-by: -
Yang Shi authored
Patch series "mm: misc migrate cleanup and improvement", v3. This patch (of 5): The commit 9f4e41f4 ("mm: refactor truncate_complete_page()") refactored truncate_complete_page(), and it is not existed anymore, correct the comment in vmscan and migrate to avoid confusion. Link: https://lkml.kernel.org/r/20201113205359.556831-1-shy828301@gmail.com Link: https://lkml.kernel.org/r/20201113205359.556831-2-shy828301@gmail.comSigned-off-by:
Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Song Liu <songliubraving@fb.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by:
-
Matthew Wilcox (Oracle) authored
We can only kmap() one subpage of a THP at a time, so loop over all relevant subpages, skipping ones which don't need to be zeroed. This is too large to inline when THPs are enabled and we actually need highmem, so put it in highmem.c. [willy@infradead.org: start1 was allowed to be less than start2] Link: https://lkml.kernel.org/r/20201124041507.28996-1-willy@infradead.orgSigned-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Song Liu <songliubraving@fb.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by:
-
Ralph Campbell authored
When migrating a zero page or pte_none() anonymous page to device private memory, migrate_vma_setup() will initialize the src[] array with a NULL PFN. This lets the device driver allocate device private memory and clear it instead of DMAing a page of zeros over the device bus. Since the source page didn't exist at the time, no struct page was locked nor a migration PTE inserted into the CPU page tables. The actual PTE insertion happens in migrate_vma_pages() when it tries to insert the device private struct page PTE into the CPU page tables. migrate_vma_pages() has to call the mmu notifiers again since another device could fault on the same page before the page table locks are acquired. Allow device drivers to optimize the invalidation similar to migrate_vma_setup() by calling mmu_notifier_range_init() which sets struct mmu_notifier_range event type to MMU_NOTIFY_MIGRATE and the migrate_pgmap_owner field. Link: https://lkml.kernel.org/r/20201021191335.10916-1-rcampbell@nvidia.comSigned-off-by:
Ralph Campbell <rcampbell@nvidia.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by:
-
