- 16 Oct, 2008 40 commits
-
-
Marcin Slusarz authored
Join multiple scr_memcpyw into 1-3 calls (usually 2). (benchmarked average speedup: 1%) Signed-off-by:
Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Antonino Daplas <adaplas@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jon Dufresne authored
The current EDID parser in the linux kernel ignores interlace modes. The patch looks for the edid interlace flag and adjusts the vertical resolution if it is found. Signed-off-by:
Jon Dufresne <jon.dufresne@gmail.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
Michal Januszewski authored
Add a maintainer entry for the uvesafb driver. Signed-off-by:
Michal Januszewski <spock@gentoo.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
Michal Januszewski authored
Some BIOSes return error codes when queried for information about modes from their own modelist. uvesafb treats this as an error case and bails out. Change this behavior so that broken modes do not prevent the driver from working. Only the failure to retrieve information about any usable video mode is considered to be an error case. Signed-off-by:
-
Mike Pagano authored
Document the change from the old "mode" parameter to the "mode_option" parameter. Signed-off-by:
Mike Pagano <mpagano@gentoo.org> Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by:
-
Benjamin Herrenschmidt authored
Implement support for HW color expansion of 1bpp images, along with some improvements to the FIFO handling and other accel operations. The offset fixup code is now unnecessary as the fbcon core will call our set_par upon switch back from KD_GRAPHICS before anything else happens. I removed it as it would slow down accel operations. The fifo wait has been improved to avoid hitting the HW register as often, and the various accel ops are now performing better caching of register values. Overall, this improve accel performances. The imageblit acceleration does result in a small overall regression in performances on some machines (on the order of 5% on some x86), probably becaus the SW path provides a better bus utilisation, but I decided to ingnore that as the performances is still very good, and on the other hand, some machines such as some sparc64 get a 3 fold performance improvement. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by:
David S. Miller <davem@davemloft.net> Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by:
-
Benjamin Herrenschmidt authored
Fix a couple of incomplete tests of the chip families in the engine init/reset code and proper initialization of the destination cache mode. The result should better match what the latest X radeon driver does. Signed-off-by:
-
Peter Jones authored
Remove imacfb entirely, merging its DMI table into the (otherwise very similar) efifb driver. This also adds hardware support for many of the newer Intel Apple hardware. This has been fairly well tested; we've been shipping it in Fedora for some time. Signed-off-by:
Peter Jones <pjones@redhat.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by:
-
Stanislaw Gruszka authored
Signed-off-by:
Stanislaw Gruszka <stf_xl@wp.pl> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by:
-
Krzysztof Helt authored
A memory clock value (MCLK) is changed to a minimum required by a current mode bandwidth. This usually lowers the MCLK to its minimum (50 MHz) thus decreasing the card performance. Just leave the MCLK value set by card BIOS. The CL-GD5446 Technical Reference Manual point 9.9.1.3 states that if a pixclock value is close (~1%) to the MCLK or MCLK/2 this may result in a jitter on the screen. A countermeasure is to use the MCLK as pixclock source instead of a VCLK. The patch implements this as well. Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
-
Krzysztof Helt authored
The 16bpp mode did not work on the Cirrus cards as the visual type was set to DIRECTCOLOR instead of TRUECOLOR. The Alpine family used one incorrect register setting so this 16bpp modes generated wrong horizontal frequency. Signed-off-by:
-
Krzysztof Helt authored
The noaccel parameter is already handled if the driver is not built as module. Signed-off-by:
-
Krzysztof Helt authored
Move call to pixclock calculation into the cirrusfb_set_par_foo(). It makes copy of clock registers redundant. Simplify clock calculations further. Signed-off-by:
-
Krzysztof Helt authored
Move calculations of CRT register values into the cirrusfb_set_par_foo() where the values are used. Signed-off-by:
-
Krzysztof Helt authored
Add __devinit attribute to probing functions. This fixed section mismatch warning from my previous patch. Kill one redundant forward declaration. Signed-off-by:
-
Krzysztof Helt authored
Use modedb for initial mode instead of table of few predefined modes. Add mode_option module parameter as a step toward unification of frame buffers' parameters. Signed-off-by:
-
Krzysztof Helt authored
The device pointer can be easily obtained from fb_info->device if needed. Signed-off-by:
-
Krzysztof Helt authored
The 24 bpp mode is not implemented. Disallow it in the cirrusfb_check_var() and remove it from checks. Signed-off-by:
-
Krzysztof Helt authored
Simplify clock calculation. Signed-off-by:
-
Krzysztof Helt authored
Remove information about memory size displayed twice each time a display mode change. Signed-off-by:
-
Phil Endecott authored
Add support for Intel's 945GME graphics chip to the intelfb driver. I have assumed that the 945GME is identical to the already-supported 945GM apart from its PCI IDs; this is based on a quick look at the X driver for these chips which seems to treat them identically. The 945GME is used in the ASUS Eee 901, and I coded this in the hope that I'd be able to use it to get a console at the native 1024x600 resolution which is not known to the BIOS. I realised too late that the intelfb driver does not support mode changing on laptops, so it won't be any use for me. Signed-off-by:
Phil Endecott <spam_from_intelfb@chezphil.org> Acked-by:
-
Krzysztof Helt authored
This was suggested by Geert Uytterhoeven to avoid overwriting of default values from the tdfx_fix. Signed-off-by:
-
Krzysztof Helt authored
Remove mutex from the fb_open/fb_release functions as these operations are mutexed at fb layer. Signed-off-by:
-
Krzysztof Helt authored
Remove mutex from the fb_open/fb_release functions as these operations are mutexed at fb layer. Signed-off-by:
-
Krzysztof Helt authored
Move common code outside if/else or switch/case clauses. Drop checks done twice inside the neofb_check_var(). Signed-off-by:
-
Krzysztof Helt authored
Update Kconfig for Permedia 2, Trident and 3Dfx frame buffer drivers. [akpm@linux-foundation.org: fix Kconfig text] Signed-off-by:
-
Joseph Chan authored
Add maintainers for VIA UniChrome(Pro)/Chrome9 Framebuffer driver Signed-off-by:
Joseph Chan <josephchan@via.com.tw> Signed-off-by:
Scott Fang <ScottFang@viatech.com.cn> Signed-off-by:
-
Joseph Chan authored
via_utility.c, via_utility.h: support user mode application with additional information vt1636.c, vt1636.h: setting for chip vt1636 Signed-off-by:
-
Joseph Chan authored
via_i2c.c, via_i2c.h: Implement i2c specification. viamode.c, viamode.c: all support modes information. Signed-off-by:
-
Joseph Chan authored
Remove the macro MMIO_OUT32, and replace it with writel() function. And replace "u32" with "unsigned long" in writel() function (original MMIO_OUT32 marco) for avoiding warning message in 64bit OS. Signed-off-by:
-
Joseph Chan authored
Correct by following Jiri Slaby's suggestions. Initialization, remove and some other important functions of viafb. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Joseph Chan authored
tbl1636.c, tbl1636.h: patch setting for VT1636. tblDPASetting.c, tblDPASetting.h: patch for graphic clock skew. Signed-off-by:
-
Joseph Chan authored
Makefile for drivers/video/via/ share.h: shared macro for viafb Signed-off-by:
-
Joseph Chan authored
lcd.c, lcd.h: LVDS generic process. lcdtbl.h: patch register for simultaneous case. Signed-off-by:
-
Joseph Chan authored
iface.c, iface.h: support getting video memory from backdoor. ioctl.c, ioctl.h: support user mode application with additional information Signed-off-by:
-
Joseph Chan authored
Display HW setting and other chips initialization. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Joseph Chan authored
dvi.c, dvi.h: TMDS generic process and setting. global.c, global.h: define global variabls. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Joseph Chan authored
Header file of information about via chipsets and debug function. Signed-off-by:
-
Joseph Chan authored
2D and HW cursor stuff of viafb driver. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Joseph Chan authored
Modified drivers/video/Makefile and drivers/video/Kconfig. Signed-off-by:
-
