- 20 Nov, 2016 40 commits
-
-
Lauro Costa authored
commit 72f9f8b5 upstream. Add hw id to ath3k usb device list and btusb blacklist T: Bus=01 Lev=01 Prnt=01 Port=08 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3487 Rev=00.02 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Requires these firmwares: ar3k/AthrBT_0x11020100.dfu and ar3k/ramps_0x11020100_40.dfu Firmwares are available in linux-firmware. Device found in a laptop ASUS model N552VW. It's an Atheros AR9462 chip. Signed-off-by:
Lauro Costa <lauro@polilinux.com.br> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Chuck Lever authored
commit a4e187d8 upstream. Before commit 778be232 ("NFS do not find client in NFSv4 pg_authenticate"), the Linux callback server replied with RPC_AUTH_ERROR / RPC_AUTH_BADCRED, instead of dropping the CB request. Let's restore that behavior so the server has a chance to do something useful about it, and provide a warning that helps admins correct the problem. Fixes: 778be232 ("NFS do not find client in NFSv4 ...") Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Tested-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Chuck Lever authored
commit 0533b130 upstream. If an RPC program does not set vs_dispatch and pc_func() returns rpc_drop_reply, the server sends a reply anyway containing a single word containing the value RPC_DROP_REPLY (in network byte-order, of course). This is a nonsense RPC message. Fixes: 9e701c61 ("svcrpc: simpler request dropping") Signed-off-by:
-
Peter Wu authored
commit ab58d8cc upstream. register_vga_switcheroo() sets the PM ops from the hda structure which is freed later in azx_free. Make sure that these ops are cleared. Caught by KASAN, initially noticed due to a general protection fault. Fixes: 246efa4a ("snd/hda: add runtime suspend/resume on optimus support (v4)") Signed-off-by:
Peter Wu <peter@lekensteyn.nl> Signed-off-by:
Takashi Iwai <tiwai@suse.de> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Alexey Dobriyan authored
commit 2c13ce8f upstream. Variable "now" seems to be genuinely used unintialized if branch if (CPUCLOCK_PERTHREAD(timer->it_clock)) { is not taken and branch if (unlikely(sighand == NULL)) { is taken. In this case the process has been reaped and the timer is marked as disarmed anyway. So none of the postprocessing of the sample is required. Return right away. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Link: http://lkml.kernel.org/r/20160707223911.GA26483@p183.telecom.bySigned-off-by:
Thomas Gleixner <tglx@linutronix.de> [bwh: Backported to 3.16: adjust filename] Signed-off-by:
-
Lukas Wunner authored
commit abb2bafd upstream. The EFI firmware on Macs contains a full-fledged network stack for downloading OS X images from osrecovery.apple.com. Unfortunately on Macs introduced 2011 and 2012, EFI brings up the Broadcom 4331 wireless card on every boot and leaves it enabled even after ExitBootServices has been called. The card continues to assert its IRQ line, causing spurious interrupts if the IRQ is shared. It also corrupts memory by DMAing received packets, allowing for remote code execution over the air. This only stops when a driver is loaded for the wireless card, which may be never if the driver is not installed or blacklisted. The issue seems to be constrained to the Broadcom 4331. Chris Milsted has verified that the newer Broadcom 4360 built into the MacBookPro11,3 (2013/2014) does not exhibit this behaviour. The chances that Apple will ever supply a firmware fix for the older machines appear to be zero. The solution is to reset the card on boot by writing to a reset bit in its mmio space. This must be done as an early quirk and not as a plain vanilla PCI quirk to successfully combat memory corruption by DMAed packets: Matthew Garrett found out in 2012 that the packets are written to EfiBootServicesData memory (http://mjg59.dreamwidth.org/11235.html). This type of memory is made available to the page allocator by efi_free_boot_services(). Plain vanilla PCI quirks run much later, in subsys initcall level. In-between a time window would be open for memory corruption. Random crashes occurring in this time window and attributed to DMAed packets have indeed been observed in the wild by Chris Bainbridge. When Matthew Garrett analyzed the memory corruption issue in 2012, he sought to fix it with a grub quirk which transitions the card to D3hot: http://git.savannah.gnu.org/cgit/grub.git/commit/?id=9d34bb85da56 This approach does not help users with other bootloaders and while it may prevent DMAed packets, it does not cure the spurious interrupts emanating from the card. Unfortunately the card's mmio space is inaccessible in D3hot, so to reset it, we have to undo the effect of Matthew's grub patch and transition the card back to D0. Note that the quirk takes a few shortcuts to reduce the amount of code: The size of BAR 0 and the location of the PM capability is identical on all affected machines and therefore hardcoded. Only the address of BAR 0 differs between models. Also, it is assumed that the BCMA core currently mapped is the 802.11 core. The EFI driver seems to always take care of this. Michael Büsch, Bjorn Helgaas and Matt Fleming contributed feedback towards finding the best solution to this problem. The following should be a comprehensive list of affected models: iMac13,1 2012 21.5" [Root Port 00:1c.3 = 8086:1e16] iMac13,2 2012 27" [Root Port 00:1c.3 = 8086:1e16] Macmini5,1 2011 i5 2.3 GHz [Root Port 00:1c.1 = 8086:1c12] Macmini5,2 2011 i5 2.5 GHz [Root Port 00:1c.1 = 8086:1c12] Macmini5,3 2011 i7 2.0 GHz [Root Port 00:1c.1 = 8086:1c12] Macmini6,1 2012 i5 2.5 GHz [Root Port 00:1c.1 = 8086:1e12] Macmini6,2 2012 i7 2.3 GHz [Root Port 00:1c.1 = 8086:1e12] MacBookPro8,1 2011 13" [Root Port 00:1c.1 = 8086:1c12] MacBookPro8,2 2011 15" [Root Port 00:1c.1 = 8086:1c12] MacBookPro8,3 2011 17" [Root Port 00:1c.1 = 8086:1c12] MacBookPro9,1 2012 15" [Root Port 00:1c.1 = 8086:1e12] MacBookPro9,2 2012 13" [Root Port 00:1c.1 = 8086:1e12] MacBookPro10,1 2012 15" [Root Port 00:1c.1 = 8086:1e12] MacBookPro10,2 2012 13" [Root Port 00:1c.1 = 8086:1e12] For posterity, spurious interrupts caused by the Broadcom 4331 wireless card resulted in splats like this (stacktrace omitted): irq 17: nobody cared (try booting with the "irqpoll" option) handlers: [<ffffffff81374370>] pcie_isr [<ffffffffc0704550>] sdhci_irq [sdhci] threaded [<ffffffffc07013c0>] sdhci_thread_irq [sdhci] [<ffffffffc0a0b960>] azx_interrupt [snd_hda_codec] Disabling IRQ #17 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79301 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111781 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=728916 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=895951#c16 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1009819 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1098621 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1149632#c5 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1279130 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1332732 Tested-by: Konstantin Simanov <k.simanov@stlk.ru> # [MacBookPro8,1] Tested-by: Lukas Wunner <lukas@wunner.de> # [MacBookPro9,1] Tested-by: Bryan Paradis <bryan.paradis@gmail.com> # [MacBookPro9,2] Tested-by: Andrew Worsley <amworsley@gmail.com> # [MacBookPro10,1] Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com> # [MacBookPro10,2] Signed-off-by:
Lukas Wunner <lukas@wunner.de> Acked-by:
Rafał Miłecki <zajec5@gmail.com> Acked-by:
Matt Fleming <matt@codeblueprint.co.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Chris Milsted <cmilsted@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Michael Buesch <m@bues.ch> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: b43-dev@lists.infradead.org Cc: linux-pci@vger.kernel.org Cc: linux-wireless@vger.kernel.org Link: http://lkml.kernel.org/r/48d0972ac82a53d460e5fce77a07b2560db95203.1465690253.git.lukas@wunner.de [ Did minor readability edits. ] Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Lukas Wunner authored
commit 850c3210 upstream. We used to scan secondary buses until the following commit that was applied in 2009: 8659c406 ("x86: only scan the root bus in early PCI quirks") which commit constrained early quirks to the root bus only. Its motivation was to prevent application of the nvidia_bugs quirk on secondary buses. We're about to add a quirk to reset the Broadcom 4331 wireless card on 2011/2012 Macs, which is located on a secondary bus behind a PCIe root port. To facilitate that, reintroduce scanning of secondary buses. The commit message of 8659c406 notes that scanning only the root bus "saves quite some unnecessary scanning work". The algorithm used prior to 8659c406 was particularly time consuming because it scanned buses 0 to 31 brute force. To avoid lengthening boot time, employ a recursive strategy which only scans buses that are actually reachable from the root bus. Yinghai Lu pointed out that the secondary bus number read from a bridge's config space may be invalid, in particular a value of 0 would cause an infinite loop. The PCI core goes beyond that and recurses to a child bus only if its bus number is greater than the parent bus number (see pci_scan_bridge()). Since the root bus is numbered 0, this implies that secondary buses may not be 0. Do the same on early scanning. If this algorithm is found to significantly impact boot time or cause infinite loops on broken hardware, it would be possible to limit its recursion depth: The Broadcom 4331 quirk applies at depth 1, all others at depth 0, so the bus need not be scanned deeper than that for now. An alternative approach would be to revert to scanning only the root bus, and apply the Broadcom 4331 quirk to the root ports 8086:1c12, 8086:1e12 and 8086:1e16. Apple always positioned the card behind either of these three ports. The quirk would then check presence of the card in slot 0 below the root port and do its deed. Signed-off-by:
-
Lukas Wunner authored
commit 447d29d1 upstream. Since the following commit: 8659c406 ("x86: only scan the root bus in early PCI quirks") ... early quirks are only applied to devices on the root bus. The motivation was to prevent application of the nvidia_bugs quirk on secondary buses. We're about to reintroduce scanning of secondary buses for a quirk to reset the Broadcom 4331 wireless card on 2011/2012 Macs. To prevent regressions, open code the requirement to apply nvidia_bugs only on the root bus. Signed-off-by:
-
Soeren Moch authored
commit ca6e6126 upstream. Implement memory barriers according to Documentation/circular-buffers.txt: - use smp_store_release() to update ringbuffer read/write pointers - use smp_load_acquire() to load write pointer on reader side - use ACCESS_ONCE() to load read pointer on writer side This fixes data stream corruptions observed e.g. on an ARM Cortex-A9 quad core system with different types (PCI, USB) of DVB tuners. Signed-off-by:
Soeren Moch <smoch@web.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 04da2dae upstream. Sparse is complaining about ngene's bad usage of a __user ptr: >> drivers/media/pci/ngene/ngene-dvb.c:62:48: sparse: incorrect type in argument 2 (different address spaces) drivers/media/pci/ngene/ngene-dvb.c:62:48: expected unsigned char const [usertype] *buf drivers/media/pci/ngene/ngene-dvb.c:62:48: got char const [noderef] <asn:1>*buf As this is intercepting a .write() file ops, we can't just memcpy. We need to use copy_from_user. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by:
-
Keerthy authored
commit e29385fa upstream. The reset value of weekday is 0x1. This is wrong since the reset values of the day/month/year make up to Jan 1 2001. When computed weekday comes out to be Monday. On a scale of 1-7(Sunday - Saturday) it should be 0x2. So we should not be relying on the reset value. Hence compute the wday using the current date/month/year values. Check if reset wday is any different from the computed wday, If different then set the wday which we computed using date/month/year values. Document Referred: http://ww1.microchip.com/downloads/en/DeviceDoc/20002266F.pdf Fixes: 1d1945d2 "drivers/rtc/rtc-ds1307.c: add alarm support for mcp7941x chips" Signed-off-by:
Keerthy <j-keerthy@ti.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> [bwh: Backported to 3.16: - No 64-time rtc_time functions available - Adjust context] Signed-off-by:
-
WANG Cong authored
commit 205e1e25 upstream. Matt reported that we have a NULL pointer dereference in ppp_pernet() from ppp_connect_channel(), i.e. pch->chan_net is NULL. This is due to that a parallel ppp_unregister_channel() could happen while we are in ppp_connect_channel(), during which pch->chan_net set to NULL. Since we need a reference to net per channel, it makes sense to sync the refcnt with the life time of the channel, therefore we should release this reference when we destroy it. Fixes: 1f461dcd ("ppp: take reference on channels netns") Reported-by:
Matt Bennett <Matt.Bennett@alliedtelesis.co.nz> Cc: Paul Mackerras <paulus@samba.org> Cc: linux-ppp@vger.kernel.org Cc: Guillaume Nault <g.nault@alphalink.fr> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by:
Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Dmitri Epshtein authored
commit 06708f81 upstream. Commit aebea2ba ("net: mvneta: fix Tx interrupt delay") intended to set coalescing threshold to a value guaranteeing interrupt generation per each sent packet, so that buffers can be released with no delay. In fact setting threshold to '1' was wrong, because it causes interrupt every two packets. According to the documentation a reason behind it is following - interrupt occurs once sent buffers counter reaches a value, which is higher than one specified in MVNETA_TXQ_SIZE_REG(q). This behavior was confirmed during tests. Also when testing the SoC working as a NAS device, better performance was observed with int-per-packet, as it strongly depends on the fact that all transmitted packets are released immediately. This commit enables NETA controller work in interrupt per sent packet mode by setting coalescing threshold to 0. Signed-off-by:
Dmitri Epshtein <dima@marvell.com> Signed-off-by:
Marcin Wojtas <mw@semihalf.com> Fixes aebea2ba ("net: mvneta: fix Tx interrupt delay") Acked-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Takashi Iwai authored
commit a8ff48cb upstream. The chmap ctls assigned to PCM streams are freed in the PCM disconnect callback. However, since the disconnect callback isn't called when the card gets freed before registering, the chmap ctls may still be left assigned. They are eventually freed together with other ctls, but it may cause an Oops at pcm_chmap_ctl_private_free(), as the function refers to the assigned PCM stream, while the PCM objects have been already freed beforehand. The fix is to free the chmap ctls also at PCM free callback, not only at PCM disconnect. Reported-by:
Laxminath Kasam <b_lkasam@codeaurora.org> Signed-off-by:
-
Takashi Iwai authored
commit f388cdcd upstream. snd_ctl_remove() has a notification for the removal event. It's superfluous when done during the device got disconnected. Although the notification itself is mostly harmless, it may potentially be harmful, and should be suppressed. Actually some components PCM may free ctl elements during the disconnect or free callbacks, thus it's no theoretical issue. This patch adds the check of card->shutdown flag for avoiding unnecessary notifications after (or during) the disconnect. Signed-off-by:
-
Lyude authored
commit 14ff8d48 upstream. DRM_CONNECTOR_POLL_CONNECT only enables polling for connections, not disconnections. Because of this, we end up losing hotplug polling for analog connectors once they get connected. Easy way to reproduce: - Grab a machine with a radeon GPU and a VGA port - Plug a monitor into the VGA port, wait for it to update the connector from disconnected to connected - Disconnect the monitor on VGA, a hotplug event is never sent for the removal of the connector. Originally, only using DRM_CONNECTOR_POLL_CONNECT might have been a good idea since doing VGA polling can sometimes result in having to mess with the DAC voltages to figure out whether or not there's actually something there since VGA doesn't have HPD. Doing this would have the potential of showing visible artifacts on the screen every time we ran a poll while a VGA display was connected. Luckily, radeon_vga_detect() only resorts to this sort of polling if the poll is forced, and DRM's polling helper doesn't force it's polls. Additionally, this removes some assignments to connector->polled that weren't actually doing anything. Signed-off-by:
Lyude <cpaul@redhat.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit d814b24f upstream. ATPX dGPU power control requires a 200ms delay between power off and on. This should fix dGPU failures on resume from power off. Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Sven Eckelmann authored
commit d1fe176c upstream. Speedy join only works when the received packet is either broadcast or an 4addr unicast packet. Thus packets converted from broadcast to unicast via the gateway handling code have to be converted to 4addr packets to allow the receiving gateway server to add the sender address as temporary entry to the translation table. Not doing it will make the batman-adv gateway server drop the DHCP response in many situations because it doesn't yet have the TT entry for the destination of the DHCP response. Fixes: 37135173 ("batman-adv: change interface_rx to get orig node") Signed-off-by:
Sven Eckelmann <sven@narfation.org> Acked-by:
Antonio Quartulli <a@unstable.cc> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
David Daney authored
commit acd168c0 upstream. When the core THP code is modifying the permissions of a huge page it calls pmd_modify(), which unfortunately was clearing the _PAGE_HUGE bit of the page table entry. The result can be kernel messages like: mm/memory.c:397: bad pmd 000000040080004d. mm/memory.c:397: bad pmd 00000003ff00004d. mm/memory.c:397: bad pmd 000000040100004d. or: ------------[ cut here ]------------ WARNING: at mm/mmap.c:3200 exit_mmap+0x150/0x158() Modules linked in: ipv6 at24 octeon3_ethernet octeon_srio_nexus m25p80 CPU: 12 PID: 1295 Comm: pmderr Not tainted 3.10.87-rt80-Cavium-Octeon #4 Stack : 0000000040808000 0000000014009ce1 0000000000400004 ffffffff81076ba0 0000000000000000 0000000000000000 ffffffff85110000 0000000000000119 0000000000000004 0000000000000000 0000000000000119 43617669756d2d4f 0000000000000000 ffffffff850fda40 ffffffff85110000 0000000000000000 0000000000000000 0000000000000009 ffffffff809207a0 0000000000000c80 ffffffff80f1bf20 0000000000000001 000000ffeca36828 0000000000000001 0000000000000000 0000000000000001 000000ffeca7e700 ffffffff80886924 80000003fd7a0000 80000003fd7a39b0 80000003fdea8000 ffffffff80885780 80000003fdea8000 ffffffff80f12218 000000000000000c 000000000000050f 0000000000000000 ffffffff80865c4c 0000000000000000 0000000000000000 ... Call Trace: [<ffffffff80865c4c>] show_stack+0x6c/0xf8 [<ffffffff80885780>] warn_slowpath_common+0x78/0xa8 [<ffffffff809207a0>] exit_mmap+0x150/0x158 [<ffffffff80882d44>] mmput+0x5c/0x110 [<ffffffff8088b450>] do_exit+0x230/0xa68 [<ffffffff8088be34>] do_group_exit+0x54/0x1d0 [<ffffffff8088bfc0>] __wake_up_parent+0x0/0x18 ---[ end trace c7b38293191c57dc ]--- BUG: Bad rss-counter state mm:80000003fa168000 idx:1 val:1536 Fix by not clearing _PAGE_HUGE bit. Signed-off-by:
David Daney <david.daney@cavium.com> Tested-by:
Aaro Koskinen <aaro.koskinen@nokia.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13687/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> [bwh: Backported to 3.16: - Adjust context - _PAGE_HUGE might not be defined] Signed-off-by:
-
Sara Sharon authored
commit d5d0689a upstream. This fixes a pretty ancient bug that hasn't manifested itself until now. The scratchbuf for command queue is allocated only for 32 slots but is accessed with the queue write pointer - which can be up to 256. Since the scratch buf size was 16 and there are up to 256 TFDs we never passed a page boundary when accessing the scratch buffer, but when attempting to increase the size of the scratch buffer a panic was quick to follow when trying to access the address resulted in a page boundary. Signed-off-by:
Sara Sharon <sara.sharon@intel.com> Fixes: 38c0f334 ("iwlwifi: use coherent DMA memory for command header") Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> [bwh: Backported to 3.2: adjust filename] Signed-off-by:
-
Theodore Ts'o authored
commit 5b9554dc upstream. If s_reserved_gdt_blocks is extremely large, it's possible for ext4_init_block_bitmap(), which is called when ext4 sets up an uninitialized block bitmap, to corrupt random kernel memory. Add the same checks which e2fsck has --- it must never be larger than blocksize / sizeof(__u32) --- and then add a backup check in ext4_init_block_bitmap() in case the superblock gets modified after the file system is mounted. Reported-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> [bwh: Backported to 3.16: - Use EIO instead of EFSCORRUPTED - Adjust context] Signed-off-by:
-
Sven Eckelmann authored
commit cbef1e10 upstream. The orig_ifinfo reference counter for last_bonding_candidate in batadv_orig_node has to be reduced when an originator node is released. Otherwise the orig_ifinfo is leaked and the reference counter the netdevice is not reduced correctly. Fixes: f3b3d901 ("batman-adv: add bonding again") Signed-off-by:
-
Sven Eckelmann authored
commit 15c2ed75 upstream. The replacement of last_bonding_candidate in batadv_orig_node has to be an atomic operation. Otherwise it is possible that the reference counter of a batadv_orig_ifinfo is reduced which was no longer the last_bonding_candidate when the new candidate is added. This can either lead to an invalid memory access or to reference leaks which make it impossible to an interface which was added to batman-adv. Fixes: f3b3d901 ("batman-adv: add bonding again") Signed-off-by:
-
Sven Eckelmann authored
commit 3db0decf upstream. The pointer batadv_bla_claim::backbone_gw can be changed at any time. Therefore, access to it must be protected to ensure that two function accessing the same backbone_gw are actually accessing the same. This is especially important when the crc_lock is used or when the backbone_gw of a claim is exchanged. Not doing so leads to invalid memory access and/or reference leaks. Fixes: 23721387 ("batman-adv: add basic bridge loop avoidance code") Fixes: 5a1dd8a4 ("batman-adv: lock crc access in bridge loop avoidance") Signed-off-by:
-
Simon Wunderlich authored
commit 5a1dd8a4 upstream. We have found some networks in which nodes were constantly requesting other nodes BLA claim tables to synchronize, just to ask for that again once completed. The reason was that the crc checksum of the asked nodes were out of sync due to missing locking and multiple writes to the same crc checksum when adding/removing entries. Therefore the asked nodes constantly reported the wrong crc, which caused repeating requests. To avoid multiple functions changing a backbone gateways crc entry at the same time, lock it using a spinlock. Signed-off-by:
Alfons Name <AlfonsName@web.de> Signed-off-by:
Antonio Quartulli <antonio@meshcoding.com> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Sven Eckelmann authored
commit 006a199d upstream. Signed-off-by:
-
Sven Eckelmann authored
commit 33fbb1f3 upstream. batadv_orig_node_new uses batadv_orig_node_vlan_new to allocate a new batadv_orig_node_vlan and add it to batadv_orig_node::vlan_list. References to this list have also to be cleaned when the batadv_orig_node is removed. Fixes: 7ea7b4a1 ("batman-adv: make the TT CRC logic VLAN specific") Signed-off-by:
-
Sven Eckelmann authored
commit 60154a1e upstream. vlan_insert_tag can return NULL on errors. The distributed arp table code therefore has to check the return value of vlan_insert_tag for NULL before it can safely operate on this pointer. Fixes: be1db4f6 ("batman-adv: make the Distributed ARP Table vlan aware") Signed-off-by:
-
Sven Eckelmann authored
commit 10c78f58 upstream. vlan_insert_tag can return NULL on errors. The bridge loop avoidance code therefore has to check the return value of vlan_insert_tag for NULL before it can safely operate on this pointer. Fixes: 23721387 ("batman-adv: add basic bridge loop avoidance code") Signed-off-by:
-
Vegard Nossum authored
commit 6a7fd522 upstream. If ext4_fill_super() fails early, it's possible for ext4_evict_inode() to call ext4_should_journal_data() before superblock options and flags are fully set up. In that case, the iput() on the journal inode can end up causing a BUG(). Work around this problem by reordering the tests so we only call ext4_should_journal_data() after we know it's not the journal inode. Fixes: 2d859db3 ("ext4: fix data corruption in inodes with journalled data") Fixes: 2b405bfa ("ext4: fix data=journal fast mount/umount hang") Cc: Jan Kara <jack@suse.cz> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Jan Kara authored
commit 646caa9c upstream. Commit 06bd3c36 (ext4: fix data exposure after a crash) uncovered a deadlock in ext4_writepages() which was previously much harder to hit. After this commit xfstest generic/130 reproduces the deadlock on small filesystems. The problem happens when ext4_do_update_inode() sets LARGE_FILE feature and marks current inode handle as synchronous. That subsequently results in ext4_journal_stop() called from ext4_writepages() to block waiting for transaction commit while still holding page locks, reference to io_end, and some prepared bio in mpd structure each of which can possibly block transaction commit from completing and thus results in deadlock. Fix the problem by releasing page locks, io_end reference, and submitting prepared bio before calling ext4_journal_stop(). [ Changed to defer the call to ext4_journal_stop() only if the handle is synchronous. --tytso ] Reported-and-tested-by:
Eryu Guan <eguan@redhat.com> Signed-off-by:
-
Vegard Nossum authored
commit f70749ca upstream. An extent with lblock = 4294967295 and len = 1 will pass the ext4_valid_extent() test: ext4_lblk_t last = lblock + len - 1; if (len == 0 || lblock > last) return 0; since last = 4294967295 + 1 - 1 = 4294967295. This would later trigger the BUG_ON(es->es_lblk + es->es_len < es->es_lblk) in ext4_es_end(). We can simplify it by removing the - 1 altogether and changing the test to use lblock + len <= lblock, since now if len = 0, then lblock + 0 == lblock and it fails, and if len > 0 then lblock + len > lblock in order to pass (i.e. it doesn't overflow). Fixes: 5946d089 ("ext4: check for overlapping extents in ext4_valid_extent_entries()") Fixes: 2f974865 ("ext4: check for zero length extent explicitly") Cc: Eryu Guan <guaneryu@gmail.com> Signed-off-by:
Phil Turnbull <phil.turnbull@oracle.com> Signed-off-by:
-
Sven Eckelmann authored
commit aaab50fc upstream. The function ar9003_hw_apply_minccapwr_thresh takes as second parameter not a pointer to the channel but a boolean value describing whether the channel is 2.4GHz or not. This broke (according to the origin commit) the ETSI regulatory compliance on 5GHz channels. Fixes: 3533bf6b ("ath9k: Fix regulatory compliance") Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
-
Cameron Gutman authored
commit caca925f upstream. This prevents a malicious USB device from causing an oops. Signed-off-by:
Cameron Gutman <aicommander@gmail.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Yoshihiro Shimoda authored
commit 15e4292a upstream. This patch fixes an issue that the CFIFOSEL register value is possible to be changed by usbhsg_ep_enable() wrongly. And then, a data transfer using CFIFO may not work correctly. For example: # modprobe g_multi file=usb-storage.bin # ifconfig usb0 192.168.1.1 up (During the USB host is sending file to the mass storage) # ifconfig usb0 down In this case, since the u_ether.c may call usb_ep_enable() in eth_stop(), if the renesas_usbhs driver is also using CFIFO for mass storage, the mass storage may not work correctly. So, this patch adds usbhs_lock() and usbhs_unlock() calling in usbhsg_ep_enable() to protect CFIFOSEL register. This is because: - CFIFOSEL.CURPIPE = 0 is also needed for the pipe configuration - The CFIFOSEL (fifo->sel) is already protected by usbhs_lock() Fixes: 97664a20 ("usb: renesas_usbhs: shrink spin lock area") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Yoshihiro Shimoda authored
commit 4fdef698 upstream. This patch fixes an issue that the xfer_work() is possible to cause NULL pointer dereference if the usb cable is disconnected while data transfer is running. In such case, a gadget driver may call usb_ep_disable()) before xfer_work() is actually called. In this case, the usbhs_pkt_pop() will call usbhsf_fifo_unselect(), and then usbhs_pipe_to_fifo() in xfer_work() will return NULL. Fixes: e73a9891 ("usb: renesas_usbhs: add DMAEngine support") Signed-off-by:
-
Yoshihiro Shimoda authored
commit 9b53d9af upstream. This patch fixes the setup sequence in xfer_work(). Otherwise, sometimes a usb transaction will get stuck. Signed-off-by:
Felipe Balbi <balbi@ti.com> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Alex Hung authored
commit fc8a601e upstream. Several users reported wifi cannot be unblocked as discussed in [1]. This patch removes the use of the 2009 flag by BIOS but uses the actual WMI function calls - it will be skipped if WMI reports unsupported. [1] https://bugzilla.kernel.org/show_bug.cgi?id=69131Signed-off-by:
Alex Hung <alex.hung@canonical.com> Tested-by:
Evgenii Shatokhin <eugene.shatokhin@yandex.ru> Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
-
Nishanth Menon authored
commit 61dc0a44 upstream. pm_runtime_get_sync does return a error value that must be checked for error conditions, else, due to various reasons, the device maynot be enabled and the system will crash due to lack of clock to the hardware module. Before: 12.562784] [00000000] *pgd=fe193835 12.562792] Internal error: : 1406 [#1] SMP ARM [...] 12.562864] CPU: 1 PID: 241 Comm: modprobe Not tainted 4.7.0-rc4-next-20160624 #2 12.562867] Hardware name: Generic DRA74X (Flattened Device Tree) 12.562872] task: ed51f140 ti: ed44c000 task.ti: ed44c000 12.562886] PC is at omap4_rng_init+0x20/0x84 [omap_rng] 12.562899] LR is at set_current_rng+0xc0/0x154 [rng_core] [...] After the proper checks: [ 94.366705] omap_rng 48090000.rng: _od_fail_runtime_resume: FIXME: missing hwmod/omap_dev info [ 94.375767] omap_rng 48090000.rng: Failed to runtime_get device -19 [ 94.382351] omap_rng 48090000.rng: initialization failed. Fixes: 665d92fa ("hwrng: OMAP: convert to use runtime PM") Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Krzysztof Kozlowski authored
commit 926b7b51 upstream. On non-DeviceTree platforms, the index of serial device is a static variable incremented on each probe. It is incremented even if deferred probe happens when getting the clock in s3c24xx_serial_init_port(). This index is used for referencing elements of statically allocated s3c24xx_serial_ports array. In case of re-probe, the index will point outside of this array leading to memory corruption. Increment the index only on successful probe. Reported-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Fixes: b497549a ("[ARM] S3C24XX: Split serial driver into core and per-cpu drivers") Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
