This splits the nct6775 driver into an interface-independent core and
a separate platform driver that wraps inb/outb port I/O (or asuswmi
methods) around that core.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Tested-by: Renze Nicolai <renze@rnplus.nl>
Link: https://lore.kernel.org/r/20220427010154.29749-7-zev@bewilderbeest.netTested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Checkpatch has been warning about these for a while; the octal
versions are both more comprehensible and more concise.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Link: https://lore.kernel.org/r/20220427010154.29749-6-zev@bewilderbeest.netTested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

When enabled, all write bits are removed from the modes of all sysfs
attribute files.  This provides a bit of infrastructure for the
upcoming i2c version of this driver, which should generally avoid
writes to device registers so as not to interfere with simultaneous
use of the device via the LPC interface.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220427010154.29749-5-zev@bewilderbeest.netTested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

We now track the number of attribute groups in nct6775_data, as a
measure to simplify handling differences in the set of enabled
attribute groups between nct6775 drivers (platform & i2c).  As a side
effect, we also reduce the amount of IS_ERR()/PTR_ERR() boilerplate a
bit.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220427010154.29749-4-zev@bewilderbeest.netTested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

This replaces the nct6775_data->{read,write}_value function pointers
with a regmap.

The major difference is that the regmap access functions may fail, and
hence require checking at each call site.  While the existing WMI
register-access code had potential failure paths, they were masked by
the fact that the read_value() function returned the register value
directly, and hence squashed errors undetectably by simply returning
zero, and while the write_value() functions were capable of reporting
errors, all callers ignored them.

This improves the robustness of the existing code, and also prepares
the driver for an i2c version to be added soon, for which register
accesses are much more likely to actually fail.

The conversion of the register-access call sites is largely mechanical
(reading a register now returns the value via an out-param pointer,
and returned errors must be checked for and propagated to callers),
though the nct6775_write_fan_div() function is refactored slightly to
avoid duplicating nearly identical (and now lengthier) code in each
switch case.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220427010154.29749-3-zev@bewilderbeest.netTested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

If a particular SMM call takes a very long time to execute,
the user might experience audio problems. Print a warning
if a particular SMM call took over 0.250 seconds to execute,
so the user can check whether or not possible audio problems
are caused by this driver.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20220426213154.724708-4-W_Armin@gmx.deSigned-off-by: Guenter Roeck <linux@roeck-us.net>

The default values for i8k_fan_mult and i8k_fan_max
should be assigend only if the values specified as
module params or in DMI are invalid/missing.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20220426213154.724708-3-W_Armin@gmx.deSigned-off-by: Guenter Roeck <linux@roeck-us.net>

When the driver tries to detect the fan multiplier during
module initialisation, it issues one SMM call for each fan.
Those SMM calls are however redundant and also try to query
fans which may not be present.
Fix that by detecting the fan multiplier during hwmon
initialisation when no extra SMM calls are needed.
Also dont assume the last nominal speed entry to be the
biggest and instead check all entries.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20220426213154.724708-2-W_Armin@gmx.deSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Atmel (now Microchip) AT30TS74 is an LM75 compatible sensor. Add it.
Signed-off-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/9494dfbc-f506-3e94-501d-6760c487c93d@axentia.seSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Document the Atmel (now Microchip) AT30TS74 which is an LM75 based
temperature sensor.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/9c01b1b5-871a-2b34-9f98-766d043e0759@axentia.seSigned-off-by: Guenter Roeck <linux@roeck-us.net>

When ti,n-factor, ti,beta-compentation are not defined in devicetree,
of_property_read_u32|s32 returns -EINVAL. In this case,
tmp401_init_client should return 0 instead of simply pass ret to its
caller.
Signed-off-by: Camel Guo <camel.guo@axis.com>
Link: https://lore.kernel.org/r/20220425100019.562781-1-camel.guo@axis.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Adding another MAX16602 chip support to MAX16601 driver
Tested with MAX16602 works as expected.
Signed-off-by: Atif Ofluoglu <atif.ofluoglu@maximintegrated.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Extend aquacomputer_d5next driver to expose hardware
temperature sensors of the Aquacomputer Farbwerk RGB controller, which
communicates through a proprietary USB HID protocol.

Four temperature sensors are available. Additionally, serial number and
firmware version are exposed through debugfs.

Also, add Jack Doan to MAINTAINERS for this driver.
Signed-off-by: Jack Doan <me@jackdoan.com>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/YmTcrq8Gzel0zYYD@jackdeskSigned-off-by: Guenter Roeck <linux@roeck-us.net>

When adding the Inspiron 3505 to the fan type blacklist,
the Documentation was not updated to mention the firmware
bug on this machine.
Fix that.

Fixes: 6ba463ed (hwmon: (dell-smm) Add Inspiron 3505 to fan type blacklist)
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20220424154824.9396-1-W_Armin@gmx.deSigned-off-by: Guenter Roeck <linux@roeck-us.net>

S-34TS04A is a JC42 compatible 2-wire serial EEPROM with temperature sensor
from Seiko Instruments/ABLIC.
Signed-off-by: Oleksandr Shamray <oleksandrs@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

tmp401 driver supports TMP401, TMP411 and TMP43X temperature sensors.
According to their datasheet:
- all of them support extended temperature range feature;
- TMP411 and TPM43X support n-factor correction feature;
- TMP43X support beta compensation feature.

In order to support setting them during bootup, this commit reads
ti,extended-range-enable, ti,n-factor and ti,beta-compensation and set
the corresponding registers during probing.
Signed-off-by: Camel Guo <camel.guo@axis.com>
Link: https://lore.kernel.org/r/20220414075824.2634839-3-camel.guo@axis.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Document the TMP401, TMP411 and TMP43x device devicetree bindings
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Camel Guo <camel.guo@axis.com>
Link: https://lore.kernel.org/r/20220414075824.2634839-2-camel.guo@axis.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Until now, only the temperature sensors where exported thru
the thermal subsystem. Export the fans as "dell-smm-fan[1-3]" too
to make them available as cooling devices.
Also update Documentation and fix a minor issue with the alphabetic
ordering of the includes.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20220410163935.7840-1-W_Armin@gmx.deSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Basing on information and testing provided by users [1] add support for
another board, ASUS ProArt X570 Creator WiFi.

[1] https://github.com/zeule/asus-ec-sensors/issues/17Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20220422111737.1352610-1-eugene.shalygin@gmail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Instead of open-coding the bad characters replacement in the hwmon name,
use the new devm_hwmon_sanitize_name().
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20220405092452.4033674-3-michael@walle.ccSigned-off-by: Guenter Roeck <linux@roeck-us.net>

More and more drivers will check for bad characters in the hwmon name
and all are using the same code snippet. Consolidate that code by adding
a new hwmon_sanitize_name() function.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20220405092452.4033674-2-michael@walle.ccSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Extend aquacomputer_d5next driver to expose hardware temperature sensors
and fans of the Aquacomputer Octo fan controller, which communicates
through a proprietary USB HID protocol.

Four temperature sensors and eight PWM controllable fans are available.
Additionally, serial number, firmware version and power-on count are
exposed through debugfs.

This driver has been tested on x86_64.
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20220404134212.9690-1-savicaleksa83@gmail.com
[groeck: Add missing "select CRC16"]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Use devm_delayed_work_autocancel() instead of hand writing it. This is
less verbose and saves a few lines of code.

devm_delayed_work_autocancel() uses devm_add_action() instead of
devm_add_action_or_reset(). This is fine, because if the underlying memory
allocation fails, no work has been scheduled yet. So there is nothing to
undo.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Iwona Winiarska <iwona.winiarska@intel.com>
Link: https://lore.kernel.org/r/fd277a708ede3882d7df6831f02d2e3c0cb813b8.1644781718.git.christophe.jaillet@wanadoo.frSigned-off-by: Guenter Roeck <linux@roeck-us.net>

WS X570-ACE has a T_Sensor header on board according to manual[1].

I'm using a 10kΩ B=3435K thermsistor attached to the header of WS X570-ACE.
EC byte at 0x3d matches readings from BIOS sensor page and environment temperature.

[1]https://www.asus.com/Motherboards-Components/Motherboards/All-series/Pro-WS-X570-ACE/HelpDesk_Manual/Signed-off-by: Wei Shuyu <wsy@dogben.com>
Link: https://lore.kernel.org/r/E1nY43Q-000rAm-9a@dogben.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Add a thermal zone interface to the devices added
under jc42 driver. This way, thermal zones described
in device tree can make use of the of nodes of these
devices.

Cc: Guenter Roeck <linux@roeck-us.net> (maintainer:JC42.4 TEMPERATURE SENSOR DRIVER)
Cc: Jean Delvare <jdelvare@suse.com> (maintainer:HARDWARE MONITORING)
Cc: linux-hwmon@vger.kernel.org (open list:JC42.4 TEMPERATURE SENSOR DRIVER)
Cc: linux-kernel@vger.kernel.org (open list)
Signed-off-by: Eduardo Valentin <eduval@amazon.com>
Signed-off-by: Eduardo Valentin <evalenti@kernel.org>
Link: https://lore.kernel.org/r/20220318233011.13980-1-eduval@amazon.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Merge tag 'driver-core-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here is one fix, and three documentation updates for 5.18-rc7.

  The fix is for the firmware loader which resolves a long-reported
  problem where the credentials of the firmware loader could be set to a
  userspace process without enough permissions to actually load the
  firmware image. Many Android vendors have been reporting this for
  quite some time.

  The documentation updates are for the embargoed-hardware-issues.rst
  file to add a new entry, change an existing one, and sort the list to
  make changes easier in the future.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  Documentation/process: Update ARM contact for embargoed hardware issues
  Documentation/process: Add embargoed HW contact for Ampere Computing
  Documentation/process: Make groups alphabetical and use tabs consistently
  firmware_loader: use kernel credentials when reading firmware

Pull char/misc driver fixes from Greg KH:
 "Here are two small driver fixes for 5.18-rc7 that resolve reported
  problems:

   - slimbus driver irq bugfix

   - interconnect sync state bugfix

  Both of these have been in linux-next with no reported problems"

* tag 'char-misc-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  slimbus: qcom: Fix IRQ check in qcom_slim_probe
  interconnect: Restore sync state by ignoring ipa-virt in provider count

Pull tty/serial driver fixes from Greg KH:
 "Here are some small tty n_gsm and serial driver fixes for 5.18-rc7
  that resolve reported problems. They include:

   - n_gsm fixes for reported issues

   - 8250_mtk driver fixes for some platforms

   - fsl_lpuart driver fix for reported problem.

   - digicolor driver fix for reported problem.

  All have been in linux-next for a while with no reported problems"

* tag 'tty-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  fsl_lpuart: Don't enable interrupts too early
  tty: n_gsm: fix invalid gsmtty_write_room() result
  tty: n_gsm: fix mux activation issues in gsm_config()
  tty: n_gsm: fix buffer over-read in gsm_dlci_data()
  serial: 8250_mtk: Fix register address for XON/XOFF character
  serial: 8250_mtk: Make sure to select the right FEATURE_SEL
  serial: 8250_mtk: Fix UART_EFR register address
  tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe()

Pull USB fixes from Greg KH:
 "Here are some small fixes for reported issues with some USB drivers.
  They include:

   - xhci fixes for xhci-mtk platform driver

   - typec driver fixes for reported problems.

   - cdc-wdm read-stuck fix

   - gadget driver fix for reported race condition

   - new usb-serial driver ids

  All of these have been in linux-next with no reported problems"

* tag 'usb-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: xhci-mtk: remove bandwidth budget table
  usb: xhci-mtk: fix fs isoc's transfer error
  usb: gadget: fix race when gadget driver register via ioctl
  usb: typec: tcpci_mt6360: Update for BMC PHY setting
  usb: gadget: uvc: allow for application to cleanly shutdown
  usb: typec: tcpci: Don't skip cleanup in .remove() on error
  usb: cdc-wdm: fix reading stuck on device close
  USB: serial: qcserial: add support for Sierra Wireless EM7590
  USB: serial: option: add Fibocom MA510 modem
  USB: serial: option: add Fibocom L610 modem
  USB: serial: pl2303: add device id for HP LM930 Display

Pull powerpc fix from Michael Ellerman:

 - Fix KVM PR on 32-bit, which was broken by some MMU code refactoring.

Thanks to: Alexander Graf, and Matt Evans.

* tag 'powerpc-5.18-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  KVM: PPC: Book3S PR: Enable MSR_DR for switch_mmu_context()

Pull x86 fix from Thomas Gleixner:
 "A single fix for the handling of unpopulated sub-pmd spaces.

  The copy & pasta from the corresponding s390 code screwed up the
  address calculation for marking the sub-pmd ranges via memset by
  omitting the ALIGN_DOWN() to calculate the proper start address.

  It's a mystery why this code is not generic and shared because there
  is nothing architecture specific in there, but that's too intrusive
  for a backportable fix"

* tag 'x86-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Fix marking of unused sub-pmd ranges

Pull scheduler fix from Thomas Gleixner:
 "The recent expansion of the sched switch tracepoint inserted a new
  argument in the middle of the arguments. This reordering broke BPF
  programs which relied on the old argument list.

  While tracepoints are not considered stable ABI, it's not trivial to
  make BPF cope with such a change, but it's being worked on. For now
  restore the original argument order and move the new argument to the
  end of the argument list"

* tag 'sched-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/tracing: Append prev_state to tp args instead

Pull irq fix from Thomas Gleixner:
 "A single fix for a recent (introduced in 5.16) regression in the core
  interrupt code.

  The consolidation of the interrupt handler invocation code added an
  unconditional warning when generic_handle_domain_irq() is invoked from
  outside hard interrupt context. That's overbroad as the requirement
  for invoking these handlers in hard interrupt context is only required
  for certain interrupt types. The subsequently called code already
  contains a warning which triggers conditionally for interrupt chips
  which indicate this requirement in their properties.

  Remove the overbroad one"

* tag 'irq-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Remove WARN_ON_ONCE() in generic_handle_domain_irq()

Merge tag 'perf-tools-fixes-for-v5.18-2022-05-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix two NDEBUG warnings in 'perf bench numa'

 - Fix ARM coresight `perf test` failure

 - Sync linux/kvm.h with the kernel sources

 - Add James and Mike as Arm64 performance events reviewers

* tag 'perf-tools-fixes-for-v5.18-2022-05-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  MAINTAINERS: Add James and Mike as Arm64 performance events reviewers
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  perf tests: Fix coresight `perf test` failure.
  perf bench: Fix two numa NDEBUG warnings

Pull more drm fixes from Dave Airlie:
 "Turns out I was right, some fixes hadn't made it to me yet. The vmwgfx
  ones also popped up later, but all seem like bad enough things to fix.
  The dma-buf, vc4 and nouveau ones are all pretty small.

  The fbdev fixes are a bit more complicated: a fix to cleanup fbdev
  devices properly, uncovered some use-after-free bugs in existing
  drivers. Then the fix for those bugs wasn't correct. This reverts that
  fix, and puts the proper fixes in place in the drivers to avoid the
  use-after-frees.

  This has had a fair number of eyes on it at this stage, and I'm
  confident enough that it puts things in the right place, and is less
  dangerous than reverting our way out of the initial change at this
  stage.

  fbdev:
   - revert NULL deref fix that turned into a use-after-free
   - prevent use-after-free in fbdev
   - efifb/simplefb/vesafb: fix cleanup paths to avoid use-after-frees

  dma-buf:
   - fix panic in stats setup

  vc4:
   - fix hdmi build

  nouveau:
   - tegra iommu present fix
   - fix leak in backlight name

  vmwgfx:
   - Black screen due to fences using FIFO checks on SVGA3
   - Random black screens on boot due to uninitialized drm_mode_fb_cmd2
   - Hangs on SVGA3 due to command buffers being used with gbobjects"

* tag 'drm-fixes-2022-05-14' of git://anongit.freedesktop.org/drm/drm:
  drm/vmwgfx: Disable command buffers on svga3 without gbobjects
  drm/vmwgfx: Initialize drm_mode_fb_cmd2
  drm/vmwgfx: Fix fencing on SVGAv3
  drm/vc4: hdmi: Fix build error for implicit function declaration
  dma-buf: call dma_buf_stats_setup after dmabuf is in valid list
  fbdev: efifb: Fix a use-after-free due early fb_info cleanup
  drm/nouveau: Fix a potential theorical leak in nouveau_get_backlight_name()
  drm/nouveau/tegra: Stop using iommu_present()
  fbdev: vesafb: Cleanup fb_info in .fb_destroy rather than .remove
  fbdev: efifb: Cleanup fb_info in .fb_destroy rather than .remove
  fbdev: simplefb: Cleanup fb_info in .fb_destroy rather than .remove
  fbdev: Prevent possible use-after-free in fb_release()
  Revert "fbdev: Make fb_release() return -ENODEV if fbdev was unregistered"

Multiple fixes to fbdev to address a regression at unregistration, an
iommu detection improvement for nouveau, a memory leak fix for nouveau,
pointer dereference fix for dma_buf_file_release(), and a build breakage
fix for vc4
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220513073044.ymayac7x7bzatrt7@houat

Merge tag 'vmwgfx-drm-fixes-5.18-2022-05-13' of https://gitlab.freedesktop.org/zack/vmwgfx into drm-fixes

vmwgfx fixes for:
- Black screen due to fences using FIFO checks on SVGA3
- Random black screens on boot due to uninitialized drm_mode_fb_cmd2
- Hangs on SVGA3 due to command buffers being used with gbobjects
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a1d32799e4c74b8540216376d7576bb783ca07ba.camel@vmware.com

Pull gfs2 fixes from Andreas Gruenbacher:
 "We've finally identified commit dc732906 ("gfs2: Introduce flag
  for glock holder auto-demotion") to be the other cause of the
  filesystem corruption we've been seeing. This feature isn't strictly
  necessary anymore, so we've decided to stop using it for now.

  With this and the gfs_iomap_end rounding fix you've already seen
  ("gfs2: Fix filesystem block deallocation for short writes" in this
  pull request), we're corruption free again now.

   - Fix filesystem block deallocation for short writes.

   - Stop using glock holder auto-demotion for now.

   - Get rid of buffered writes inefficiencies due to page faults being
     disabled.

   - Minor other cleanups"

* tag 'gfs2-v5.18-rc4-fix3' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Stop using glock holder auto-demotion for now
  gfs2: buffered write prefaulting
  gfs2: Align read and write chunks to the page cache
  gfs2: Pull return value test out of should_fault_in_pages
  gfs2: Clean up use of fault_in_iov_iter_{read,write}able
  gfs2: Variable rename
  gfs2: Fix filesystem block deallocation for short writes

We're having unresolved issues with the glock holder auto-demotion mechanism
introduced in commit dc732906.  This mechanism was assumed to be essential
for avoiding frequent short reads and writes until commit 296abc0d
("gfs2: No short reads or writes upon glock contention").  Since then,
when the inode glock is lost, it is simply re-acquired and the operation
is resumed.  This means that apart from the performance penalty, we
might as well drop the inode glock before faulting in pages, and
re-acquire it afterwards.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>