1. 22 Mar, 2013 11 commits
  2. 21 Mar, 2013 18 commits
    • Sergei Shtylyov's avatar
      sh_eth: fix unused variable warning · fe0e76f7
      Sergei Shtylyov authored
      Commit d5e07e69 (sh_eth: use managed device API)
      has caused this warning (due to my overlook):
      
      drivers/net/ethernet/renesas/sh_eth.c: In function `sh_eth_drv_remove':
      drivers/net/ethernet/renesas/sh_eth.c:2482:25: warning: unused variable `mdp'
      [-Wunused-variable]
      
      Kill the darn variable now...
      Signed-off-by: default avatarSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fe0e76f7
    • Daniel Borkmann's avatar
      filter: bpf_jit_comp: refactor and unify BPF JIT image dump output · 79617801
      Daniel Borkmann authored
      If bpf_jit_enable > 1, then we dump the emitted JIT compiled image
      after creation. Currently, only SPARC and PowerPC has similar output
      as in the reference implementation on x86_64. Make a small helper
      function in order to reduce duplicated code and make the dump output
      uniform across architectures x86_64, SPARC, PPC, ARM (e.g. on ARM
      flen, pass and proglen are currently not shown, but would be
      interesting to know as well), also for future BPF JIT implementations
      on other archs.
      
      Cc: Mircea Gherzan <mgherzan@gmail.com>
      Cc: Matt Evans <matt@ozlabs.org>
      Cc: Eric Dumazet <eric.dumazet@google.com>
      Cc: David S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarDaniel Borkmann <dborkman@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      79617801
    • Sergei Shtylyov's avatar
      sh_eth: use managed device API · d5e07e69
      Sergei Shtylyov authored
      Switch the driver to the managed device API by replacing ioremap() calls with
      devm_ioremap_resource() (that will also result in calling request_mem_region()
      which the driver forgot to do until now) and k[mz]alloc() with devm_kzalloc() --
      this permits to simplify driver's probe()/remove() method cleanup. We can now
      remove the ioremap() error messages since the error messages are printed by
       devm_ioremap_resource() itself. We can also remove the 'bitbang' field from
      'struct sh_eth_private' as we don't need it anymore in order to free the memory
      behind it...
      Signed-off-by: default avatarSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d5e07e69
    • Sergei Shtylyov's avatar
      sh_eth: kill unneeded typecast in sh_eth_drv_probe() · 564044b0
      Sergei Shtylyov authored
      sh_eth_drv_probe() does cast from 'void *' when assigning to the 'pd'  variable
      which is automatic anyway. Turn the assignment into initializer, while removing
      the cast...
      Signed-off-by: default avatarSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      564044b0
    • Sergei Shtylyov's avatar
      sh_eth: use PIR_* bits · dfed5e7f
      Sergei Shtylyov authored
      sh_mdio_init() uses the bare numbers instead of the PHY interface bits, despite
      these are declared in sh_eth.h as 'enum PIR_BIT'...
      Signed-off-by: default avatarSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      dfed5e7f
    • Willem de Bruijn's avatar
      net: fix psock_fanout on sparc64 · 98e821a2
      Willem de Bruijn authored
      The packetsocket fanout test uses a packet ring. Use TPACKET_V2
      instead of TPACKET_V1 to work around a known 32/64 bit issue in
      the older ring that manifests on sparc64.
      Signed-off-by: default avatarWillem de Bruijn <willemb@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      98e821a2
    • Andrey Vagin's avatar
      netlink: Diag core and basic socket info dumping (v2) · eaaa3139
      Andrey Vagin authored
      The netlink_diag can be built as a module, just like it's done in
      unix sockets.
      
      The core dumping message carries the basic info about netlink sockets:
      family, type and protocol, portis, dst_group, dst_portid, state.
      
      Groups can be received as an optional parameter NETLINK_DIAG_GROUPS.
      
      Netlink sockets cab be filtered by protocols.
      
      The socket inode number and cookie is reserved for future per-socket info
      retrieving. The per-protocol filtering is also reserved for future by
      requiring the sdiag_protocol to be zero.
      
      The file /proc/net/netlink doesn't provide enough information for
      dumping netlink sockets. It doesn't provide dst_group, dst_portid,
      groups above 32.
      
      v2: fix NETLINK_DIAG_MAX. Now it's equal to the last constant.
      Acked-by: default avatarPavel Emelyanov <xemul@parallels.com>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: Eric Dumazet <edumazet@google.com>
      Cc: Pablo Neira Ayuso <pablo@netfilter.org>
      Cc: "Eric W. Biederman" <ebiederm@xmission.com>
      Cc: Gao feng <gaofeng@cn.fujitsu.com>
      Cc: Thomas Graf <tgraf@suug.ch>
      Signed-off-by: default avatarAndrey Vagin <avagin@openvz.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      eaaa3139
    • Andrey Vagin's avatar
      net: prepare netlink code for netlink diag · 0f29c768
      Andrey Vagin authored
      Move a few declarations in a header.
      Acked-by: default avatarPavel Emelyanov <xemul@parallels.com>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: Eric Dumazet <edumazet@google.com>
      Cc: Pablo Neira Ayuso <pablo@netfilter.org>
      Cc: "Eric W. Biederman" <ebiederm@xmission.com>
      Cc: Gao feng <gaofeng@cn.fujitsu.com>
      Cc: Thomas Graf <tgraf@suug.ch>
      Signed-off-by: default avatarAndrey Vagin <avagin@openvz.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0f29c768
    • Claudiu Manoil's avatar
      gianfar: Remove superfluous kernel_dropped local counter · 953d2768
      Claudiu Manoil authored
      The GRO_DROP return code is handled by the core network layer.
      The current kernel approach is to factorize this kind of statistics into
      the upper layers, instead of having all the drivers maintaining them.
      Signed-off-by: default avatarClaudiu Manoil <claudiu.manoil@freescale.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      953d2768
    • Claudiu Manoil's avatar
    • Claudiu Manoil's avatar
      gianfar: Remove 'maybe-uninitialized' compile warning · 39c0a0d5
      Claudiu Manoil authored
      Warning message:
      warning: 'budget_per_q' may be used uninitialized in this function
      
      budget_per_q won't be used uninitialized since the only time
      it doesn't get initialized is when entering gfar_poll with
      num_act_queues == 0, meaning rstat_rxf == 0, in which case
      budget_per_q is not utilized (as it has no meaning).
      Inititalize budget_per_q to 0 though to suppress this compile
      warning.
      Signed-off-by: default avatarClaudiu Manoil <claudiu.manoil@freescale.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      39c0a0d5
    • Nobuhiro Iwamatsu's avatar
    • Zefan Li's avatar
      net: remove redundant ifdef CONFIG_CGROUPS · 4021db9a
      Zefan Li authored
      The cgroup code has been surrounded by ifdef CONFIG_NET_CLS_CGROUP
      and CONFIG_NETPRIO_CGROUP.
      Signed-off-by: default avatarLi Zefan <lizefan@huawei.com>
      Acked-by: default avatarNeil Horman <nhorman@tuxdriver.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4021db9a
    • Yuchung Cheng's avatar
      tcp: implement RFC5682 F-RTO · e33099f9
      Yuchung Cheng authored
      This patch implements F-RTO (foward RTO recovery):
      
      When the first retransmission after timeout is acknowledged, F-RTO
      sends new data instead of old data. If the next ACK acknowledges
      some never-retransmitted data, then the timeout was spurious and the
      congestion state is reverted.  Otherwise if the next ACK selectively
      acknowledges the new data, then the timeout was genuine and the
      loss recovery continues. This idea applies to recurring timeouts
      as well. While F-RTO sends different data during timeout recovery,
      it does not (and should not) change the congestion control.
      
      The implementaion follows the three steps of SACK enhanced algorithm
      (section 3) in RFC5682. Step 1 is in tcp_enter_loss(). Step 2 and
      3 are in tcp_process_loss().  The basic version is not supported
      because SACK enhanced version also works for non-SACK connections.
      
      The new implementation is functionally in parity with the old F-RTO
      implementation except the one case where it increases undo events:
      In addition to the RFC algorithm, a spurious timeout may be detected
      without sending data in step 2, as long as the SACK confirms not
      all the original data are dropped. When this happens, the sender
      will undo the cwnd and perhaps enter fast recovery instead. This
      additional check increases the F-RTO undo events by 5x compared
      to the prior implementation on Google Web servers, since the sender
      often does not have new data to send for HTTP.
      
      Note F-RTO may detect spurious timeout before Eifel with timestamps
      does so.
      Signed-off-by: default avatarYuchung Cheng <ycheng@google.com>
      Acked-by: default avatarEric Dumazet <edumazet@google.com>
      Acked-by: default avatarNeal Cardwell <ncardwell@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e33099f9
    • Yuchung Cheng's avatar
      tcp: refactor CA_Loss state processing · ab42d9ee
      Yuchung Cheng authored
      Consolidate all of TCP CA_Loss state processing in
      tcp_fastretrans_alert() into a new function called tcp_process_loss().
      This is to prepare the new F-RTO implementation in the next patch.
      Signed-off-by: default avatarYuchung Cheng <ycheng@google.com>
      Acked-by: default avatarNeal Cardwell <ncardwell@google.com>
      Acked-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ab42d9ee
    • Yuchung Cheng's avatar
      tcp: refactor F-RTO · 9b44190d
      Yuchung Cheng authored
      The patch series refactor the F-RTO feature (RFC4138/5682).
      
      This is to simplify the loss recovery processing. Existing F-RTO
      was developed during the experimental stage (RFC4138) and has
      many experimental features.  It takes a separate code path from
      the traditional timeout processing by overloading CA_Disorder
      instead of using CA_Loss state. This complicates CA_Disorder state
      handling because it's also used for handling dubious ACKs and undos.
      While the algorithm in the RFC does not change the congestion control,
      the implementation intercepts congestion control in various places
      (e.g., frto_cwnd in tcp_ack()).
      
      The new code implements newer F-RTO RFC5682 using CA_Loss processing
      path.  F-RTO becomes a small extension in the timeout processing
      and interfaces with congestion control and Eifel undo modules.
      It lets congestion control (module) determines how many to send
      independently.  F-RTO only chooses what to send in order to detect
      spurious retranmission. If timeout is found spurious it invokes
      existing Eifel undo algorithms like DSACK or TCP timestamp based
      detection.
      
      The first patch removes all F-RTO code except the sysctl_tcp_frto is
      left for the new implementation.  Since CA_EVENT_FRTO is removed, TCP
      westwood now computes ssthresh on regular timeout CA_EVENT_LOSS event.
      Signed-off-by: default avatarYuchung Cheng <ycheng@google.com>
      Acked-by: default avatarNeal Cardwell <ncardwell@google.com>
      Acked-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9b44190d
    • Daniel Borkmann's avatar
      filter: add minimal BPF JIT image disassembler · e306e2c1
      Daniel Borkmann authored
      This is a minimal stand-alone user space helper, that allows for debugging or
      verification of emitted BPF JIT images. This is in particular useful for
      emitted opcode debugging, since minor bugs in the JIT compiler can be fatal.
      The disassembler is architecture generic and uses libopcodes and libbfd.
      
      How to get to the disassembly, example:
      
        1) `echo 2 > /proc/sys/net/core/bpf_jit_enable`
        2) Load a BPF filter (e.g. `tcpdump -p -n -s 0 -i eth1 host 192.168.20.0/24`)
        3) Run e.g. `bpf_jit_disasm -o` to disassemble the most recent JIT code output
      
      `bpf_jit_disasm -o` will display the related opcodes to a particular instruction
      as well. Example for x86_64:
      
      $ ./bpf_jit_disasm
      94 bytes emitted from JIT compiler (pass:3, flen:9)
      ffffffffa0356000 + <x>:
         0:	push   %rbp
         1:	mov    %rsp,%rbp
         4:	sub    $0x60,%rsp
         8:	mov    %rbx,-0x8(%rbp)
         c:	mov    0x68(%rdi),%r9d
        10:	sub    0x6c(%rdi),%r9d
        14:	mov    0xe0(%rdi),%r8
        1b:	mov    $0xc,%esi
        20:	callq  0xffffffffe0d01b71
        25:	cmp    $0x86dd,%eax
        2a:	jne    0x000000000000003d
        2c:	mov    $0x14,%esi
        31:	callq  0xffffffffe0d01b8d
        36:	cmp    $0x6,%eax
      [...]
        5c:	leaveq
        5d:	retq
      
      $ ./bpf_jit_disasm -o
      94 bytes emitted from JIT compiler (pass:3, flen:9)
      ffffffffa0356000 + <x>:
         0:	push   %rbp
      	55
         1:	mov    %rsp,%rbp
      	48 89 e5
         4:	sub    $0x60,%rsp
      	48 83 ec 60
         8:	mov    %rbx,-0x8(%rbp)
      	48 89 5d f8
         c:	mov    0x68(%rdi),%r9d
      	44 8b 4f 68
        10:	sub    0x6c(%rdi),%r9d
      	44 2b 4f 6c
      [...]
        5c:	leaveq
      	c9
        5d:	retq
      	c3
      Signed-off-by: default avatarDaniel Borkmann <dborkman@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e306e2c1
    • David S. Miller's avatar
      Merge branch 'for-davem' of... · b34870fc
      David S. Miller authored
      Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into wireless
      
      John W. Linville says:
      
      ====================
      This is a big pull request for new features intended for the 3.10
      stream...
      
      Regarding mac80211, Johannes says:
      
      "First, I merged mac80211/master to avoid some conflicts. This brings in
      a bunch of fixes you're already familiar with. For real -next material,
      I have a whole bunch of minstrel work, minstrel_ht from Felix and legacy
      minstrel from Thomas (Huehn). The other Thomas (Pedersen) did a number
      of changes in mesh to allow userspace peering management even when the
      mesh isn't secured. Stanislaw changes suspend/resume to always
      disconnect the networks. This is typically already done by
      network-manager so won't make a huge difference for most users, but
      fixes a number problems, particularly with USB drivers that can easily
      disconnect while suspended. Ilan has a small change to allow mac80211
      drivers to differentiate remain-on-channel reasons, and Jouni extends
      nl80211 to allow fast roaming with full-MAC devices. I have a fairly
      large number of patches as well, many of them fairly simple cleanups,
      but also allowing split wiphy dumps and adding back the full wiphy
      information in nl80211, station entry change checking and more VHT work
      including VHT capability overrides (mostly for testing purposes)."
      
      And for iwlwifi, Johannes says:
      
      "Here, I also merged iwlwifi-fixes to avoid conflicts, and otherwise have
      various cleanups and improvements on the MVM driver, along with a few
      throughout the driver. Other than Bluetooth Coexistence from Emmanuel
      there's no over-arching theme, so listing them would pretty much
      reproduce the shortlog."
      
      Regarding NFC, Samuel says:
      
      "The 2 features we have with this one are:
      
      - An LLCP Service Name Lookup (SNL) netlink interface for querying LLCP
        service availability from user space.
        Along the way, Thierry also improved the existing SNL interface for
        aggregating SNL responses.
      
      - An initial LLCP socket options implementation, for setting the Receive
        Window (RW) and the Maximum Information Unit Extension (MIUX) per socket.
        This is need for the LLCP validation tests.
      
      We also have a microread MEI build failure here: I am not sending this one to
      3.9 because the MEI bus code is not there yet, so it won't break for anyone
      else than me."
      
      And for ath6kl, Kalle says:
      
      "I added tracing support to ath6kl, along with a new Kconfig option. Now
      there's also a workaround to reset USB devices when the firmware upload
      fails, this happened when host was warm rebooted. There are also quite a
      few small fixes or cleanup."
      
      On top of all that, there is the usual bundle of driver updates
      with new features, new hardware support and the like mixed-in.
      The ath9k, b43, brcmfmac, mwifiex, rt2800, and wil6210 drivers
      are all well-represented, and a few other drivers are hit as well.
      I also pulled-in the wireless fixes tree in order to resolve some
      pending merge conflicts.
      
      Please let me know if there are problems!
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b34870fc
  3. 20 Mar, 2013 11 commits