- 23 Jan, 2019 27 commits
-
-
Christophe Leroy authored
commit c56c2e17 upstream. This patch moves the mapping of IV after the kmalloc(). This avoids having to unmap in case kmalloc() fails. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by:
Horia Geantă <horia.geanta@nxp.com> Cc: stable@vger.kernel.org Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ivan Mironov authored
commit 44759979 upstream. Changing of caching mode via /sys/devices/.../scsi_disk/.../cache_type may fail if device responds to MODE SENSE command with DPOFUA flag set, and then checks this flag to be not set on MODE SELECT command. In this scenario, when trying to change cache_type, write always fails: # echo "none" >cache_type bash: echo: write error: Invalid argument And following appears in dmesg: [13007.865745] sd 1:0:1:0: [sda] Sense Key : Illegal Request [current] [13007.865753] sd 1:0:1:0: [sda] Add. Sense: Invalid field in parameter list From SBC-4 r15, 6.5.1 "Mode pages overview", description of DEVICE-SPECIFIC PARAMETER field in the mode parameter header: ... The write protect (WP) bit for mode data sent with a MODE SELECT command shall be ignored by the device server. ... The DPOFUA bit is reserved for mode data sent with a MODE SELECT command. ... The remaining bits in the DEVICE-SPECIFIC PARAMETER byte are also reserved and shall be set to zero. [mkp: shuffled commentary to commit description] Cc: stable@vger.kernel.org Signed-off-by:
Ivan Mironov <mironov.ivan@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Stanley Chu authored
commit 3f7e62bb upstream. The commit 356fd266 ("scsi: Set request queue runtime PM status back to active on resume") fixed up the inconsistent RPM status between request queue and device. However changing request queue RPM status shall be done only on successful resume, otherwise status may be still inconsistent as below, Request queue: RPM_ACTIVE Device: RPM_SUSPENDED This ends up soft lockup because requests can be submitted to underlying devices but those devices and their required resource are not resumed. For example, After above inconsistent status happens, IO request can be submitted to UFS device driver but required resource (like clock) is not resumed yet thus lead to warning as below call stack, WARN_ON(hba->clk_gating.state != CLKS_ON); ufshcd_queuecommand scsi_dispatch_cmd scsi_request_fn __blk_run_queue cfq_insert_request __elv_add_request blk_flush_plug_list blk_finish_plug jbd2_journal_commit_transaction kjournald2 We may see all behind IO requests hang because of no response from storage host or device and then soft lockup happens in system. In the end, system may crash in many ways. Fixes: 356fd266 (scsi: Set request queue runtime PM status back to active on resume) Cc: stable@vger.kernel.org Signed-off-by:
Stanley Chu <stanley.chu@mediatek.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Kees Cook authored
commit 9474f4e7 upstream. It's possible that a pid has died before we take the rcu lock, in which case we can't walk the ancestry list as it may be detached. Instead, check for death first before doing the walk. Reported-by: syzbot+a9ac39bf55329e206219@syzkaller.appspotmail.com Fixes: 2d514487 ("security: Yama LSM") Cc: stable@vger.kernel.org Suggested-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
James Morris <james.morris@microsoft.com> Signed-off-by:
-
Josef Bacik authored
commit 74d5d229 upstream. If we flip read-only before we initiate writeback on all dirty pages for ordered extents we've created then we'll have ordered extents left over on umount, which results in all sorts of bad things happening. Fix this by making sure we wait on ordered extents if we have to do the aborted transaction cleanup stuff. generic/475 can produce this warning: [ 8531.177332] WARNING: CPU: 2 PID: 11997 at fs/btrfs/disk-io.c:3856 btrfs_free_fs_root+0x95/0xa0 [btrfs] [ 8531.183282] CPU: 2 PID: 11997 Comm: umount Tainted: G W 5.0.0-rc1-default+ #394 [ 8531.185164] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),BIOS rel-1.11.2-0-gf9626cc-prebuilt.qemu-project.org 04/01/2014 [ 8531.187851] RIP: 0010:btrfs_free_fs_root+0x95/0xa0 [btrfs] [ 8531.193082] RSP: 0018:ffffb1ab86163d98 EFLAGS: 00010286 [ 8531.194198] RAX: ffff9f3449494d18 RBX: ffff9f34a2695000 RCX:0000000000000000 [ 8531.195629] RDX: 0000000000000002 RSI: 0000000000000001 RDI:0000000000000000 [ 8531.197315] RBP: ffff9f344e930000 R08: 0000000000000001 R09:0000000000000000 [ 8531.199095] R10: 0000000000000000 R11: ffff9f34494d4ff8 R12:ffffb1ab86163dc0 [ 8531.200870] R13: ffff9f344e9300b0 R14: ffffb1ab86163db8 R15:0000000000000000 [ 8531.202707] FS: 00007fc68e949fc0(0000) GS:ffff9f34bd800000(0000)knlGS:0000000000000000 [ 8531.204851] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8531.205942] CR2: 00007ffde8114dd8 CR3: 000000002dfbd000 CR4:00000000000006e0 [ 8531.207516] Call Trace: [ 8531.208175] btrfs_free_fs_roots+0xdb/0x170 [btrfs] [ 8531.210209] ? wait_for_completion+0x5b/0x190 [ 8531.211303] close_ctree+0x157/0x350 [btrfs] [ 8531.212412] generic_shutdown_super+0x64/0x100 [ 8531.213485] kill_anon_super+0x14/0x30 [ 8531.214430] btrfs_kill_super+0x12/0xa0 [btrfs] [ 8531.215539] deactivate_locked_super+0x29/0x60 [ 8531.216633] cleanup_mnt+0x3b/0x70 [ 8531.217497] task_work_run+0x98/0xc0 [ 8531.218397] exit_to_usermode_loop+0x83/0x90 [ 8531.219324] do_syscall_64+0x15b/0x180 [ 8531.220192] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 8531.221286] RIP: 0033:0x7fc68e5e4d07 [ 8531.225621] RSP: 002b:00007ffde8116608 EFLAGS: 00000246 ORIG_RAX:00000000000000a6 [ 8531.227512] RAX: 0000000000000000 RBX: 00005580c2175970 RCX:00007fc68e5e4d07 [ 8531.229098] RDX: 0000000000000001 RSI: 0000000000000000 RDI:00005580c2175b80 [ 8531.230730] RBP: 0000000000000000 R08: 00005580c2175ba0 R09:00007ffde8114e80 [ 8531.232269] R10: 0000000000000000 R11: 0000000000000246 R12:00005580c2175b80 [ 8531.233839] R13: 00007fc68eac61c4 R14: 00005580c2175a68 R15:0000000000000000 Leaving a tree in the rb-tree: 3853 void btrfs_free_fs_root(struct btrfs_root *root) 3854 { 3855 iput(root->ino_cache_inode); 3856 WARN_ON(!RB_EMPTY_ROOT(&root->inode_tree)); CC: stable@vger.kernel.org Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
Josef Bacik <josef@toxicpanda.com> [ add stacktrace ] Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
David Sterba authored
commit 77b7aad1 upstream. This reverts commit e73e81b6. This patch causes a few problems: - adds latency to btrfs_finish_ordered_io - as btrfs_finish_ordered_io is used for free space cache, generating more work from btrfs_btree_balance_dirty_nodelay could end up in the same workque, effectively deadlocking 12260 kworker/u96:16+btrfs-freespace-write D [<0>] balance_dirty_pages+0x6e6/0x7ad [<0>] balance_dirty_pages_ratelimited+0x6bb/0xa90 [<0>] btrfs_finish_ordered_io+0x3da/0x770 [<0>] normal_work_helper+0x1c5/0x5a0 [<0>] process_one_work+0x1ee/0x5a0 [<0>] worker_thread+0x46/0x3d0 [<0>] kthread+0xf5/0x130 [<0>] ret_from_fork+0x24/0x30 [<0>] 0xffffffffffffffff Transaction commit will wait on the freespace cache: 838 btrfs-transacti D [<0>] btrfs_start_ordered_extent+0x154/0x1e0 [<0>] btrfs_wait_ordered_range+0xbd/0x110 [<0>] __btrfs_wait_cache_io+0x49/0x1a0 [<0>] btrfs_write_dirty_block_groups+0x10b/0x3b0 [<0>] commit_cowonly_roots+0x215/0x2b0 [<0>] btrfs_commit_transaction+0x37e/0x910 [<0>] transaction_kthread+0x14d/0x180 [<0>] kthread+0xf5/0x130 [<0>] ret_from_fork+0x24/0x30 [<0>] 0xffffffffffffffff And then writepages ends up waiting on transaction commit: 9520 kworker/u96:13+flush-btrfs-1 D [<0>] wait_current_trans+0xac/0xe0 [<0>] start_transaction+0x21b/0x4b0 [<0>] cow_file_range_inline+0x10b/0x6b0 [<0>] cow_file_range.isra.69+0x329/0x4a0 [<0>] run_delalloc_range+0x105/0x3c0 [<0>] writepage_delalloc+0x119/0x180 [<0>] __extent_writepage+0x10c/0x390 [<0>] extent_write_cache_pages+0x26f/0x3d0 [<0>] extent_writepages+0x4f/0x80 [<0>] do_writepages+0x17/0x60 [<0>] __writeback_single_inode+0x59/0x690 [<0>] writeback_sb_inodes+0x291/0x4e0 [<0>] __writeback_inodes_wb+0x87/0xb0 [<0>] wb_writeback+0x3bb/0x500 [<0>] wb_workfn+0x40d/0x610 [<0>] process_one_work+0x1ee/0x5a0 [<0>] worker_thread+0x1e0/0x3d0 [<0>] kthread+0xf5/0x130 [<0>] ret_from_fork+0x24/0x30 [<0>] 0xffffffffffffffff Eventually, we have every process in the system waiting on balance_dirty_pages(), and nobody is able to make progress on page writeback. The original patch tried to fix an OOM condition, that happened on 4.4 but no success reproducing that on later kernels (4.19 and 4.20). This is more likely a problem in OOM itself. Link: https://lore.kernel.org/linux-btrfs/20180528054821.9092-1-ethanlien@synology.com/Reported-by:
Chris Mason <clm@fb.com> CC: stable@vger.kernel.org # 4.18+ CC: ethanlien <ethanlien@synology.com> Signed-off-by:
-
Eric Biggers authored
commit 8f9c4693 upstream. Keys for "authenc" AEADs are formatted as an rtattr containing a 4-byte 'enckeylen', followed by an authentication key and an encryption key. crypto_authenc_extractkeys() parses the key to find the inner keys. However, it fails to consider the case where the rtattr's payload is longer than 4 bytes but not 4-byte aligned, and where the key ends before the next 4-byte aligned boundary. In this case, 'keylen -= RTA_ALIGN(rta->rta_len);' underflows to a value near UINT_MAX. This causes a buffer overread and crash during crypto_ahash_setkey(). Fix it by restricting the rtattr payload to the expected size. Reproducer using AF_ALG: #include <linux/if_alg.h> #include <linux/rtnetlink.h> #include <sys/socket.h> int main() { int fd; struct sockaddr_alg addr = { .salg_type = "aead", .salg_name = "authenc(hmac(sha256),cbc(aes))", }; struct { struct rtattr attr; __be32 enckeylen; char keys[1]; } __attribute__((packed)) key = { .attr.rta_len = sizeof(key), .attr.rta_type = 1 /* CRYPTO_AUTHENC_KEYA_PARAM */, }; fd = socket(AF_ALG, SOCK_SEQPACKET, 0); bind(fd, (void *)&addr, sizeof(addr)); setsockopt(fd, SOL_ALG, ALG_SET_KEY, &key, sizeof(key)); } It caused: BUG: unable to handle kernel paging request at ffff88007ffdc000 PGD 2e01067 P4D 2e01067 PUD 2e04067 PMD 2e05067 PTE 0 Oops: 0000 [#1] SMP CPU: 0 PID: 883 Comm: authenc Not tainted 4.20.0-rc1-00108-g00c9fe37 #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-20181126_142135-anatol 04/01/2014 RIP: 0010:sha256_ni_transform+0xb3/0x330 arch/x86/crypto/sha256_ni_asm.S:155 [...] Call Trace: sha256_ni_finup+0x10/0x20 arch/x86/crypto/sha256_ssse3_glue.c:321 crypto_shash_finup+0x1a/0x30 crypto/shash.c:178 shash_digest_unaligned+0x45/0x60 crypto/shash.c:186 crypto_shash_digest+0x24/0x40 crypto/shash.c:202 hmac_setkey+0x135/0x1e0 crypto/hmac.c:66 crypto_shash_setkey+0x2b/0xb0 crypto/shash.c:66 shash_async_setkey+0x10/0x20 crypto/shash.c:223 crypto_ahash_setkey+0x2d/0xa0 crypto/ahash.c:202 crypto_authenc_setkey+0x68/0x100 crypto/authenc.c:96 crypto_aead_setkey+0x2a/0xc0 crypto/aead.c:62 aead_setkey+0xc/0x10 crypto/algif_aead.c:526 alg_setkey crypto/af_alg.c:223 [inline] alg_setsockopt+0xfe/0x130 crypto/af_alg.c:256 __sys_setsockopt+0x6d/0xd0 net/socket.c:1902 __do_sys_setsockopt net/socket.c:1913 [inline] __se_sys_setsockopt net/socket.c:1910 [inline] __x64_sys_setsockopt+0x1f/0x30 net/socket.c:1910 do_syscall_64+0x4a/0x180 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: e236d4a8 ("[CRYPTO] authenc: Move enckeylen into key itself") Cc: <stable@vger.kernel.org> # v2.6.25+ Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Eric Biggers authored
commit ab57b335 upstream. Convert the bcm crypto driver to use crypto_authenc_extractkeys() so that it picks up the fix for broken validation of rtattr::rta_len. This also fixes the DES weak key check to actually be done on the right key. (It was checking the authentication key, not the encryption key...) Fixes: 9d12ba86 ("crypto: brcm - Add Broadcom SPU driver") Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by:
-
Harsh Jain authored
commit a7773363 upstream. Authencesn template in decrypt path unconditionally calls aead_request_complete after ahash_verify which leads to following kernel panic in after decryption. [ 338.539800] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 [ 338.548372] PGD 0 P4D 0 [ 338.551157] Oops: 0000 [#1] SMP PTI [ 338.554919] CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Tainted: G W I 4.19.7+ #13 [ 338.564431] Hardware name: Supermicro X8ST3/X8ST3, BIOS 2.0 07/29/10 [ 338.572212] RIP: 0010:esp_input_done2+0x350/0x410 [esp4] [ 338.578030] Code: ff 0f b6 68 10 48 8b 83 c8 00 00 00 e9 8e fe ff ff 8b 04 25 04 00 00 00 83 e8 01 48 98 48 8b 3c c5 10 00 00 00 e9 f7 fd ff ff <8b> 04 25 04 00 00 00 83 e8 01 48 98 4c 8b 24 c5 10 00 00 00 e9 3b [ 338.598547] RSP: 0018:ffff911c97803c00 EFLAGS: 00010246 [ 338.604268] RAX: 0000000000000002 RBX: ffff911c4469ee00 RCX: 0000000000000000 [ 338.612090] RDX: 0000000000000000 RSI: 0000000000000130 RDI: ffff911b87c20400 [ 338.619874] RBP: 0000000000000000 R08: ffff911b87c20498 R09: 000000000000000a [ 338.627610] R10: 0000000000000001 R11: 0000000000000004 R12: 0000000000000000 [ 338.635402] R13: ffff911c89590000 R14: ffff911c91730000 R15: 0000000000000000 [ 338.643234] FS: 0000000000000000(0000) GS:ffff911c97800000(0000) knlGS:0000000000000000 [ 338.652047] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 338.658299] CR2: 0000000000000004 CR3: 00000001ec20a000 CR4: 00000000000006f0 [ 338.666382] Call Trace: [ 338.669051] <IRQ> [ 338.671254] esp_input_done+0x12/0x20 [esp4] [ 338.675922] chcr_handle_resp+0x3b5/0x790 [chcr] [ 338.680949] cpl_fw6_pld_handler+0x37/0x60 [chcr] [ 338.686080] chcr_uld_rx_handler+0x22/0x50 [chcr] [ 338.691233] uldrx_handler+0x8c/0xc0 [cxgb4] [ 338.695923] process_responses+0x2f0/0x5d0 [cxgb4] [ 338.701177] ? bitmap_find_next_zero_area_off+0x3a/0x90 [ 338.706882] ? matrix_alloc_area.constprop.7+0x60/0x90 [ 338.712517] ? apic_update_irq_cfg+0x82/0xf0 [ 338.717177] napi_rx_handler+0x14/0xe0 [cxgb4] [ 338.722015] net_rx_action+0x2aa/0x3e0 [ 338.726136] __do_softirq+0xcb/0x280 [ 338.730054] irq_exit+0xde/0xf0 [ 338.733504] do_IRQ+0x54/0xd0 [ 338.736745] common_interrupt+0xf/0xf Fixes: 104880a6 ("crypto: authencesn - Convert to new AEAD...") Signed-off-by:
Harsh Jain <harsh@chelsio.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Aymen Sghaier authored
commit 04e6d25c upstream. Recent changes - probably DMA API related (generic and/or arm64-specific) - exposed a case where driver maps a zero-length buffer: ahash_init()->ahash_update()->ahash_final() with a zero-length string to hash kernel BUG at kernel/dma/swiotlb.c:475! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 1823 Comm: cryptomgr_test Not tainted 4.20.0-rc1-00108-g00c9fe37 #1 Hardware name: LS1046A RDB Board (DT) pstate: 80000005 (Nzcv daif -PAN -UAO) pc : swiotlb_tbl_map_single+0x170/0x2b8 lr : swiotlb_map_page+0x134/0x1f8 sp : ffff00000f79b8f0 x29: ffff00000f79b8f0 x28: 0000000000000000 x27: ffff0000093d0000 x26: 0000000000000000 x25: 00000000001f3ffe x24: 0000000000200000 x23: 0000000000000000 x22: 00000009f2c538c0 x21: ffff800970aeb410 x20: 0000000000000001 x19: ffff800970aeb410 x18: 0000000000000007 x17: 000000000000000e x16: 0000000000000001 x15: 0000000000000019 x14: c32cb8218a167fe8 x13: ffffffff00000000 x12: ffff80097fdae348 x11: 0000800976bca000 x10: 0000000000000010 x9 : 0000000000000000 x8 : ffff0000091fd6c8 x7 : 0000000000000000 x6 : 00000009f2c538bf x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 00000009f2c538c0 x1 : 00000000f9fff000 x0 : 0000000000000000 Process cryptomgr_test (pid: 1823, stack limit = 0x(____ptrval____)) Call trace: swiotlb_tbl_map_single+0x170/0x2b8 swiotlb_map_page+0x134/0x1f8 ahash_final_no_ctx+0xc4/0x6cc ahash_final+0x10/0x18 crypto_ahash_op+0x30/0x84 crypto_ahash_final+0x14/0x1c __test_hash+0x574/0xe0c test_hash+0x28/0x80 __alg_test_hash+0x84/0xd0 alg_test_hash+0x78/0x144 alg_test.part.30+0x12c/0x2b4 alg_test+0x3c/0x68 cryptomgr_test+0x44/0x4c kthread+0xfc/0x128 ret_from_fork+0x10/0x18 Code: d34bfc18 2a1a03f7 1a9f8694 35fff89a (d4210000) Cc: <stable@vger.kernel.org> Signed-off-by:
Aymen Sghaier <aymen.sghaier@nxp.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 4a06fa67 ] Commit 2efd4fca ("ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull") avoided a read beyond the end of the skb linear segment by calling pskb_may_pull. That function can trigger a BUG_ON in pskb_expand_head if the skb is shared, which it is when when peeking. It can also return ENOMEM. Avoid both by switching to safer skb_header_pointer. Fixes: 2efd4fca ("ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull") Reported-by:
syzbot <syzkaller@googlegroups.com> Suggested-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 001e465f ] A network device stack with multiple layers of bonding devices can trigger a false positive lockdep warning. Adding lockdep nest levels fixes this. Update the level on both enslave and unlink, to avoid the following series of events .. ip netns add test ip netns exec test bash ip link set dev lo addr 00:11:22:33:44:55 ip link set dev lo down ip link add dev bond1 type bond ip link add dev bond2 type bond ip link set dev lo master bond1 ip link set dev bond1 master bond2 ip link set dev bond1 nomaster ip link set dev bond2 master bond1 .. from still generating a splat: [ 193.652127] ====================================================== [ 193.658231] WARNING: possible circular locking dependency detected [ 193.664350] 4.20.0 #8 Not tainted [ 193.668310] ------------------------------------------------------ [ 193.674417] ip/15577 is trying to acquire lock: [ 193.678897] 00000000a40e3b69 (&(&bond->stats_lock)->rlock#3/3){+.+.}, at: bond_get_stats+0x58/0x290 [ 193.687851] but task is already holding lock: [ 193.693625] 00000000807b9d9f (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0x58/0x290 [..] [ 193.851092] lock_acquire+0xa7/0x190 [ 193.855138] _raw_spin_lock_nested+0x2d/0x40 [ 193.859878] bond_get_stats+0x58/0x290 [ 193.864093] dev_get_stats+0x5a/0xc0 [ 193.868140] bond_get_stats+0x105/0x290 [ 193.872444] dev_get_stats+0x5a/0xc0 [ 193.876493] rtnl_fill_stats+0x40/0x130 [ 193.880797] rtnl_fill_ifinfo+0x6c5/0xdc0 [ 193.885271] rtmsg_ifinfo_build_skb+0x86/0xe0 [ 193.890091] rtnetlink_event+0x5b/0xa0 [ 193.894320] raw_notifier_call_chain+0x43/0x60 [ 193.899225] netdev_change_features+0x50/0xa0 [ 193.904044] bond_compute_features.isra.46+0x1ab/0x270 [ 193.909640] bond_enslave+0x141d/0x15b0 [ 193.913946] do_set_master+0x89/0xa0 [ 193.918016] do_setlink+0x37c/0xda0 [ 193.921980] __rtnl_newlink+0x499/0x890 [ 193.926281] rtnl_newlink+0x48/0x70 [ 193.930238] rtnetlink_rcv_msg+0x171/0x4b0 [ 193.934801] netlink_rcv_skb+0xd1/0x110 [ 193.939103] rtnetlink_rcv+0x15/0x20 [ 193.943151] netlink_unicast+0x3b5/0x520 [ 193.947544] netlink_sendmsg+0x2fd/0x3f0 [ 193.951942] sock_sendmsg+0x38/0x50 [ 193.955899] ___sys_sendmsg+0x2ba/0x2d0 [ 193.960205] __x64_sys_sendmsg+0xad/0x100 [ 193.964687] do_syscall_64+0x5a/0x460 [ 193.968823] entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 7e2556e4 ("bonding: avoid lockdep confusion in bond_get_stats()") Reported-by:
-
Jason Gunthorpe authored
[ Upstream commit d972f3dc ] 'dev' is non NULL when the addr_len check triggers so it must goto a label that does the dev_put otherwise dev will have a leaked refcount. This bug causes the ib_ipoib module to become unloadable when using systemd-network as it triggers this check on InfiniBand links. Fixes: 99137b78 ("packet: validate address length") Reported-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Acked-by:
-
JianJhen Chen authored
[ Upstream commit 4c84edc1 ] When handling DNAT'ed packets on a bridge device, the neighbour cache entry from lookup was used without checking its state. It means that a cache entry in the NUD_STALE state will be used directly instead of entering the NUD_DELAY state to confirm the reachability of the neighbor. This problem becomes worse after commit 2724680b ("neigh: Keep neighbour cache entries if number of them is small enough."), since all neighbour cache entries in the NUD_STALE state will be kept in the neighbour table as long as the number of cache entries does not exceed the value specified in gc_thresh1. This commit validates the state of a neighbour cache entry before using the entry. Signed-off-by:
JianJhen Chen <kchen@synology.com> Reviewed-by:
JinLin Chen <jlchen@synology.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 7d033c9f ] This patch makes sure the flow label in the IPv6 header forged in ipv6_local_error() is initialized. BUG: KMSAN: kernel-infoleak in _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32 CPU: 1 PID: 24675 Comm: syz-executor1 Not tainted 4.20.0-rc7+ #4 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x173/0x1d0 lib/dump_stack.c:113 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613 kmsan_internal_check_memory+0x455/0xb00 mm/kmsan/kmsan.c:675 kmsan_copy_to_user+0xab/0xc0 mm/kmsan/kmsan_hooks.c:601 _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32 copy_to_user include/linux/uaccess.h:177 [inline] move_addr_to_user+0x2e9/0x4f0 net/socket.c:227 ___sys_recvmsg+0x5d7/0x1140 net/socket.c:2284 __sys_recvmsg net/socket.c:2327 [inline] __do_sys_recvmsg net/socket.c:2337 [inline] __se_sys_recvmsg+0x2fa/0x450 net/socket.c:2334 __x64_sys_recvmsg+0x4a/0x70 net/socket.c:2334 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x457ec9 Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f8750c06c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002f RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457ec9 RDX: 0000000000002000 RSI: 0000000020000400 RDI: 0000000000000005 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f8750c076d4 R13: 00000000004c4a60 R14: 00000000004d8140 R15: 00000000ffffffff Uninit was stored to memory at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:204 [inline] kmsan_save_stack mm/kmsan/kmsan.c:219 [inline] kmsan_internal_chain_origin+0x134/0x230 mm/kmsan/kmsan.c:439 __msan_chain_origin+0x70/0xe0 mm/kmsan/kmsan_instr.c:200 ipv6_recv_error+0x1e3f/0x1eb0 net/ipv6/datagram.c:475 udpv6_recvmsg+0x398/0x2ab0 net/ipv6/udp.c:335 inet_recvmsg+0x4fb/0x600 net/ipv4/af_inet.c:830 sock_recvmsg_nosec net/socket.c:794 [inline] sock_recvmsg+0x1d1/0x230 net/socket.c:801 ___sys_recvmsg+0x4d5/0x1140 net/socket.c:2278 __sys_recvmsg net/socket.c:2327 [inline] __do_sys_recvmsg net/socket.c:2337 [inline] __se_sys_recvmsg+0x2fa/0x450 net/socket.c:2334 __x64_sys_recvmsg+0x4a/0x70 net/socket.c:2334 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:204 [inline] kmsan_internal_poison_shadow+0x92/0x150 mm/kmsan/kmsan.c:158 kmsan_kmalloc+0xa6/0x130 mm/kmsan/kmsan_hooks.c:176 kmsan_slab_alloc+0xe/0x10 mm/kmsan/kmsan_hooks.c:185 slab_post_alloc_hook mm/slab.h:446 [inline] slab_alloc_node mm/slub.c:2759 [inline] __kmalloc_node_track_caller+0xe18/0x1030 mm/slub.c:4383 __kmalloc_reserve net/core/skbuff.c:137 [inline] __alloc_skb+0x309/0xa20 net/core/skbuff.c:205 alloc_skb include/linux/skbuff.h:998 [inline] ipv6_local_error+0x1a7/0x9e0 net/ipv6/datagram.c:334 __ip6_append_data+0x129f/0x4fd0 net/ipv6/ip6_output.c:1311 ip6_make_skb+0x6cc/0xcf0 net/ipv6/ip6_output.c:1775 udpv6_sendmsg+0x3f8e/0x45d0 net/ipv6/udp.c:1384 inet_sendmsg+0x54a/0x720 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] __sys_sendto+0x8c4/0xac0 net/socket.c:1788 __do_sys_sendto net/socket.c:1800 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:1796 __x64_sys_sendto+0x6e/0x90 net/socket.c:1796 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 Bytes 4-7 of 28 are uninitialized Memory access of size 28 starts at ffff8881937bfce0 Data copied to user address 0000000020000000 Signed-off-by:
-
Mark Rutland authored
[ Backport of upstream commit b3669b1e ] To allow EL0 (and/or EL1) to use pointer authentication functionality, we must ensure that pointer authentication instructions and accesses to pointer authentication keys are not trapped to EL2. This patch ensures that HCR_EL2 is configured appropriately when the kernel is booted at EL2. For non-VHE kernels we set HCR_EL2.{API,APK}, ensuring that EL1 can access keys and permit EL0 use of instructions. For VHE kernels host EL0 (TGE && E2H) is unaffected by these settings, and it doesn't matter how we configure HCR_EL2.{API,APK}, so we don't bother setting them. This does not enable support for KVM guests, since KVM manages HCR_EL2 itself when running VMs. Reviewed-by:
Richard Henderson <richard.henderson@linaro.org> Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Acked-by:
Christoffer Dall <christoffer.dall@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: kvmarm@lists.cs.columbia.edu Signed-off-by:
Will Deacon <will.deacon@arm.com> [kristina: backport to 4.14.y: adjust context] Signed-off-by:
Kristina Martsenko <kristina.martsenko@arm.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Mark Rutland authored
[ Backport of upstream commit 4eaed6aa ] In KVM we define the configuration of HCR_EL2 for a VHE HOST in HCR_HOST_VHE_FLAGS, but we don't have a similar definition for the non-VHE host flags, and open-code HCR_RW. Further, in head.S we open-code the flags for VHE and non-VHE configurations. In future, we're going to want to configure more flags for the host, so lets add a HCR_HOST_NVHE_FLAGS defintion, and consistently use both HCR_HOST_VHE_FLAGS and HCR_HOST_NVHE_FLAGS in the kvm code and head.S. We now use mov_q to generate the HCR_EL2 value, as we use when configuring other registers in head.S. Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Reviewed-by:
-
Varun Prakash authored
[ Upstream commit ed076c55 ] In case of arp failure call cxgbit_put_csk() to free csk. Signed-off-by:
Varun Prakash <varun@chelsio.com> Signed-off-by:
-
Sasha Levin authored
This reverts commit b8315280. A wrong commit message was used for the stable commit because of a human error (and duplicate commit subject lines). This patch reverts this error, and the following patches add the two upstream commits. Signed-off-by:
-
Xunlei Pang authored
commit 512ac999 upstream. I noticed that cgroup task groups constantly get throttled even if they have low CPU usage, this causes some jitters on the response time to some of our business containers when enabling CPU quotas. It's very simple to reproduce: mkdir /sys/fs/cgroup/cpu/test cd /sys/fs/cgroup/cpu/test echo 100000 > cpu.cfs_quota_us echo $$ > tasks then repeat: cat cpu.stat | grep nr_throttled # nr_throttled will increase steadily After some analysis, we found that cfs_rq::runtime_remaining will be cleared by expire_cfs_rq_runtime() due to two equal but stale "cfs_{b|q}->runtime_expires" after period timer is re-armed. The current condition to judge clock drift in expire_cfs_rq_runtime() is wrong, the two runtime_expires are actually the same when clock drift happens, so this condtion can never hit. The orginal design was correctly done by this commit: a9cf55b2 ("sched: Expire invalid runtime") ... but was changed to be the current implementation due to its locking bug. This patch introduces another way, it adds a new field in both structures cfs_rq and cfs_bandwidth to record the expiration update sequence, and uses them to figure out if clock drift happens (true if they are equal). Signed-off-by:
Xunlei Pang <xlpang@linux.alibaba.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> [alakeshh: backport: Fixed merge conflicts: - sched.h: Fix the indentation and order in which the variables are declared to match with coding style of the existing code in 4.14 Struct members of same type were declared in separate lines in upstream patch which has been changed back to having multiple members of same type in the same line. e.g. int a; int b; -> int a, b; ] Signed-off-by:
Alakesh Haloi <alakeshh@amazon.com> Reviewed-by:
Ben Segall <bsegall@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> # 4.14.x Fixes: 51f2176d ("sched/fair: Fix unlocked reads of some cfs_b->quota/period") Link: http://lkml.kernel.org/r/20180620101834.24455-1-xlpang@linux.alibaba.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Ben Hutchings authored
The backport of commit afeaade9 "media: em28xx: make v4l2-compliance happier by starting sequence on zero" added a reset on em28xx_v4l2::field_count to em28xx_enable_analog_tuner() but it should be done in em28xx_start_analog_streaming(). Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Loic Poulain authored
commit a89e7bcb upstream. The Clock Data Recovery (CDR) circuit allows to automatically adjust the RX sampling-point/phase for high frequency cards (SDR104, HS200...). CDR is automatically enabled during DLL configuration. However, according to the APQ8016 reference manual, this function must be disabled during TX and tuning phase in order to prevent any interferences during tuning challenges and unexpected phase alteration during TX transfers. This patch enables/disables CDR according to the current transfer mode. This fixes sporadic write transfer issues observed with some SDR104 and HS200 cards. Inspired by sdhci-msm downstream patch: https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/432516/Reported-by:
Leonid Segal <leonid.s@variscite.com> Reported-by:
Manabu Igusa <migusa@arrowjapan.com> Signed-off-by:
Loic Poulain <loic.poulain@linaro.org> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Acked-by:
Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> [georgi: backport to v4.14] Signed-off-by:
-
Oliver Hartkopp authored
commit 0aaa8137 upstream. Muyu Yu provided a POC where user root with CAP_NET_ADMIN can create a CAN frame modification rule that makes the data length code a higher value than the available CAN frame data size. In combination with a configured checksum calculation where the result is stored relatively to the end of the data (e.g. cgw_csum_xor_rel) the tail of the skb (e.g. frag_list pointer in skb_shared_info) can be rewritten which finally can cause a system crash. Michael Kubecek suggested to drop frames that have a DLC exceeding the available space after the modification process and provided a patch that can handle CAN FD frames too. Within this patch we also limit the length for the checksum calculations to the maximum of Classic CAN data length (8). CAN frames that are dropped by these additional checks are counted with the CGW_DELETED counter which indicates misconfigurations in can-gw rules. This fixes CVE-2019-3701. Reported-by:
Muyu Yu <ieatmuttonchuan@gmail.com> Reported-by:
Marcus Meissner <meissner@suse.de> Suggested-by:
Michal Kubecek <mkubecek@suse.cz> Tested-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Dmitry Safonov authored
commit d3736d82 upstream. Try to get reference for ldisc during tty_reopen(). If ldisc present, we don't need to do tty_ldisc_reinit() and lock the write side for line discipline semaphore. Effectively, it optimizes fast-path for tty_reopen(), but more importantly it won't interrupt ongoing IO on the tty as no ldisc change is needed. Fixes user-visible issue when tty_reopen() interrupted login process for user with a long password, observed and reported by Lukas. Fixes: c96cf923 ("tty: Don't block on IO when ldisc change is pending") Fixes: 83d817f4 ("tty: Hold tty_ldisc_lock() during tty_reopen()") Cc: Jiri Slaby <jslaby@suse.com> Reported-by:
Lukas F. Hartmann <lukas@mntmn.com> Tested-by:
Dmitry Safonov <dima@arista.com> Signed-off-by:
-
Dmitry Safonov authored
commit cf62a1a1 upstream. As notted by Jiri, tty_ldisc_reinit() shouldn't rely on tty counter. Simplify math by increasing the counter after reinit success. Cc: Jiri Slaby <jslaby@suse.com> Link: lkml.kernel.org/r/<20180829022353.23568-2-dima@arista.com> Suggested-by:
Jiri Slaby <jslaby@suse.com> Reviewed-by:
Jiri Slaby <jslaby@suse.cz> Tested-by:
-
Dmitry Safonov authored
commit 83d817f4 upstream. tty_ldisc_reinit() doesn't race with neither tty_ldisc_hangup() nor set_ldisc() nor tty_ldisc_release() as they use tty lock. But it races with anyone who expects line discipline to be the same after hoding read semaphore in tty_ldisc_ref(). We've seen the following crash on v4.9.108 stable: BUG: unable to handle kernel paging request at 0000000000002260 IP: [..] n_tty_receive_buf_common+0x5f/0x86d Workqueue: events_unbound flush_to_ldisc Call Trace: [..] n_tty_receive_buf2 [..] tty_ldisc_receive_buf [..] flush_to_ldisc [..] process_one_work [..] worker_thread [..] kthread [..] ret_from_fork tty_ldisc_reinit() should be called with ldisc_sem hold for writing, which will protect any reader against line discipline changes. Cc: Jiri Slaby <jslaby@suse.com> Cc: stable@vger.kernel.org # b027e229 ("tty: fix data race between tty_init_dev and flush of buf") Reviewed-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by:
Tycho Andersen <tycho@tycho.ws> Signed-off-by:
-
Dmitry Safonov authored
commit 231f8fd0 upstream. ldsem_down_read() will sleep if there is pending writer in the queue. If the writer times out, readers in the queue should be woken up, otherwise they may miss a chance to acquire the semaphore until the last active reader will do ldsem_up_read(). There was a couple of reports where there was one active reader and other readers soft locked up: Showing all locks held in the system: 2 locks held by khungtaskd/17: #0: (rcu_read_lock){......}, at: watchdog+0x124/0x6d1 #1: (tasklist_lock){.+.+..}, at: debug_show_all_locks+0x72/0x2d3 2 locks held by askfirst/123: #0: (&tty->ldisc_sem){.+.+.+}, at: ldsem_down_read+0x46/0x58 #1: (&ldata->atomic_read_lock){+.+...}, at: n_tty_read+0x115/0xbe4 Prevent readers wait for active readers to release ldisc semaphore. Link: lkml.kernel.org/r/20171121132855.ajdv4k6swzhvktl6@wfg-t540p.sh.intel.com Link: lkml.kernel.org/r/20180907045041.GF1110@shao2-debian Cc: Jiri Slaby <jslaby@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Reported-by:
kernel test robot <rong.a.chen@intel.com> Signed-off-by:
-
- 16 Jan, 2019 13 commits
-
-
Greg Kroah-Hartman authored
-
Christoffer Dall authored
commit fb544d1c upstream. We recently addressed a VMID generation race by introducing a read/write lock around accesses and updates to the vmid generation values. However, kvm_arch_vcpu_ioctl_run() also calls need_new_vmid_gen() but does so without taking the read lock. As far as I can tell, this can lead to the same kind of race: VM 0, VCPU 0 VM 0, VCPU 1 ------------ ------------ update_vttbr (vmid 254) update_vttbr (vmid 1) // roll over read_lock(kvm_vmid_lock); force_vm_exit() local_irq_disable need_new_vmid_gen == false //because vmid gen matches enter_guest (vmid 254) kvm_arch.vttbr = <PGD>:<VMID 1> read_unlock(kvm_vmid_lock); enter_guest (vmid 1) Which results in running two VCPUs in the same VM with different VMIDs and (even worse) other VCPUs from other VMs could now allocate clashing VMID 254 from the new generation as long as VCPU 0 is not exiting. Attempt to solve this by making sure vttbr is updated before another CPU can observe the updated VMID generation. Cc: stable@vger.kernel.org Fixes: f0cf47d9 "KVM: arm/arm64: Close VMID generation race" Reviewed-by:
Julien Thierry <julien.thierry@arm.com> Signed-off-by:
-
Vasily Averin authored
commit d4b09acf upstream. if node have NFSv41+ mounts inside several net namespaces it can lead to use-after-free in svc_process_common() svc_process_common() /* Setup reply header */ rqstp->rq_xprt->xpt_ops->xpo_prep_reply_hdr(rqstp); <<< HERE svc_process_common() can use incorrect rqstp->rq_xprt, its caller function bc_svc_process() takes it from serv->sv_bc_xprt. The problem is that serv is global structure but sv_bc_xprt is assigned per-netnamespace. According to Trond, the whole "let's set up rqstp->rq_xprt for the back channel" is nothing but a giant hack in order to work around the fact that svc_process_common() uses it to find the xpt_ops, and perform a couple of (meaningless for the back channel) tests of xpt_flags. All we really need in svc_process_common() is to be able to run rqstp->rq_xprt->xpt_ops->xpo_prep_reply_hdr() Bruce J Fields points that this xpo_prep_reply_hdr() call is an awfully roundabout way just to do "svc_putnl(resv, 0);" in the tcp case. This patch does not initialiuze rqstp->rq_xprt in bc_svc_process(), now it calls svc_process_common() with rqstp->rq_xprt = NULL. To adjust reply header svc_process_common() just check rqstp->rq_prot and calls svc_tcp_prep_reply_hdr() for tcp case. To handle rqstp->rq_xprt = NULL case in functions called from svc_process_common() patch intruduces net namespace pointer svc_rqst->rq_bc_net and adjust SVC_NET() definition. Some other function was also adopted to properly handle described case. Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Cc: stable@vger.kernel.org Fixes: 23c20ecd ("NFS: callback up - users counting cleanup") Signed-off-by:
J. Bruce Fields <bfields@redhat.com> v2: - added lost extern svc_tcp_prep_reply_hdr() - dropped trace_svc_process() changes Signed-off-by:
-
Theodore Ts'o authored
commit 95cb6713 upstream. We already using mapping_set_error() in fs/ext4/page_io.c, so all we need to do is to use file_check_and_advance_wb_err() when handling fsync() requests in ext4_sync_file(). Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
-
Theodore Ts'o authored
commit ad211f3e upstream. In no-journal mode, we previously used __generic_file_fsync() in no-journal mode. This triggers a lockdep warning, and in addition, it's not safe to depend on the inode writeback mechanism in the case ext4. We can solve both problems by calling ext4_write_inode() directly. Signed-off-by:
-
Theodore Ts'o authored
commit e8680786 upstream. The xfstests generic/475 test switches the underlying device with dm-error while running a stress test. This results in a large number of file system errors, and since we can't lock the buffer head when marking the superblock dirty in the ext4_grp_locked_error() case, it's possible the superblock to be !buffer_uptodate() without buffer_write_io_error() being true. We need to set buffer_uptodate() before we call mark_buffer_dirty() or this will trigger a WARN_ON. It's safe to do this since the superblock must have been properly read into memory or the mount would have been successful. So if buffer_uptodate() is not set, we can safely assume that this happened due to a failed attempt to write the superblock. Signed-off-by:
-
Theodore Ts'o authored
commit 2b08b1f1 upstream. The ext4_inline_data_fiemap() function calls fiemap_fill_next_extent() while still holding the xattr semaphore. This is not necessary and it triggers a circular lockdep warning. This is because fiemap_fill_next_extent() could trigger a page fault when it writes into page which triggers a page fault. If that page is mmaped from the inline file in question, this could very well result in a deadlock. This problem can be reproduced using generic/519 with a file system configuration which has the inline_data feature enabled. Signed-off-by:
-
Theodore Ts'o authored
commit 812c0cab upstream. There are enough credits reserved for most dioread_nolock writes; however, if the extent tree is sufficiently deep, and/or quota is enabled, the code was not allowing for all eventualities when reserving journal credits for the unwritten extent conversion. This problem can be seen using xfstests ext4/034: WARNING: CPU: 1 PID: 257 at fs/ext4/ext4_jbd2.c:271 __ext4_handle_dirty_metadata+0x10c/0x180 Workqueue: ext4-rsv-conversion ext4_end_io_rsv_work RIP: 0010:__ext4_handle_dirty_metadata+0x10c/0x180 ... EXT4-fs: ext4_free_blocks:4938: aborting transaction: error 28 in __ext4_handle_dirty_metadata EXT4: jbd2_journal_dirty_metadata failed: handle type 11 started at line 4921, credits 4/0, errcode -28 EXT4-fs error (device dm-1) in ext4_free_blocks:4950: error 28 Signed-off-by:
-
Ilya Dryomov authored
commit 85f5a4d6 upstream. There is a window between when RBD_DEV_FLAG_REMOVING is set and when the device is removed from rbd_dev_list. During this window, we set "already" and return 0. Returning 0 from write(2) can confuse userspace tools because 0 indicates that nothing was written. In particular, "rbd unmap" will retry the write multiple times a second: 10:28:05.463299 write(4, "0", 1) = 0 10:28:05.463509 write(4, "0", 1) = 0 10:28:05.463720 write(4, "0", 1) = 0 10:28:05.463942 write(4, "0", 1) = 0 10:28:05.464155 write(4, "0", 1) = 0 Cc: stable@vger.kernel.org Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Tested-by:
Dongsheng Yang <dongsheng.yang@easystack.cn> Signed-off-by:
-
Ivan Mironov authored
commit 62d85b3b upstream. SDL 1.2 sets all fields related to the pixel format to zero in some cases[1]. Prior to commit db05c481 ("drm: fb-helper: Reject all pixel format changing requests"), there was an unintentional workaround for this that existed for more than a decade. First in device-specific DRM drivers, then here in drm_fb_helper.c. Previous code containing this workaround just ignores pixel format fields from userspace code. Not a good thing either, as this way, driver may silently use pixel format different from what client actually requested, and this in turn will lead to displaying garbage on the screen. I think that returning EINVAL to userspace in this particular case is the right option, so I decided to left code from problematic commit untouched instead of just reverting it entirely. Here is the steps required to reproduce this problem exactly: 1) Compile fceux[2] with SDL 1.2.15 and without GTK or OpenGL support. SDL should be compiled with fbdev support (which is on by default). 2) Create /etc/fb.modes with following contents (values seems not used, and just required to trigger problematic code in SDL): mode "test" geometry 1 1 1 1 1 timings 1 1 1 1 1 1 1 endmode 3) Create ~/.fceux/fceux.cfg with following contents: SDL.Hotkeys.Quit = 27 SDL.DoubleBuffering = 1 4) Ensure that screen resolution is at least 1280x960 (e.g. append "video=Virtual-1:1280x960-32" to the kernel cmdline for qemu/QXL). 5) Try to run fceux on VT with some ROM file[3]: # ./fceux color_test.nes [1] SDL 1.2.15 source code, src/video/fbcon/SDL_fbvideo.c, FB_SetVideoMode() [2] http://www.fceux.com [3] Example ROM: https://github.com/bokuweb/rustynes/blob/master/roms/color_test.nesReported-by:
saahriktu <mail@saahriktu.org> Suggested-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-2-mironov.ivan@gmail.com Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-2-mironov.ivan@gmail.comSigned-off-by:
-
Yi Zeng authored
commit 6ebec961 upstream. If adapter->retries is set to a minus value from user space via ioctl, it will make __i2c_transfer and __i2c_smbus_xfer skip the calling to adapter->algo->master_xfer and adapter->algo->smbus_xfer that is registered by the underlying bus drivers, and return value 0 to all the callers. The bus driver will never be accessed anymore by all users, besides, the users may still get successful return value without any error or information log print out. If adapter->timeout is set to minus value from user space via ioctl, it will make the retrying loop in __i2c_transfer and __i2c_smbus_xfer always break after the the first try, due to the time_after always returns true. Signed-off-by:
Yi Zeng <yizeng@asrmicro.com> [wsa: minor grammar updates to commit message] Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org Signed-off-by:
-
Hans de Goede authored
commit 2b531d71 upstream. The current-source used for the battery temp-sensor (TS) is shared with the GPADC. For proper fuel-gauge and charger operation the TS current-source needs to be permanently on. But to read the GPADC we need to temporary switch the TS current-source to ondemand, so that the GPADC can use it, otherwise we will always read an all 0 value. The switching from on to on-ondemand is not necessary when the TS current-source is off (this happens on devices which do not have a TS). Prior to this commit there were 2 issues with our handling of the TS current-source switching: 1) We were writing hardcoded values to the ADC TS pin-ctrl register, overwriting various other unrelated bits. Specifically we were overwriting the current-source setting for the TS and GPIO0 pins, forcing it to 80ųA independent of its original setting. On a Chuwi Vi10 tablet this was causing us to get a too high adc value (due to a too high current-source) resulting in acpi_lpat_raw_to_temp() returning -ENOENT, resulting in: ACPI Error: AE_ERROR, Returned by Handler for [UserDefinedRegion] ACPI Error: Method parse/execution failed \_SB.SXP1._TMP, AE_ERROR This commit fixes this by using regmap_update_bits to change only the relevant bits. 2) At the end of intel_xpower_pmic_get_raw_temp() we were unconditionally enabling the TS current-source even on devices where the TS-pin is not used and the current-source thus was off on entry of the function. This commit fixes this by checking if the TS current-source is off when entering intel_xpower_pmic_get_raw_temp() and if so it is left as is. Fixes: 58eefe2f (ACPI / PMIC: xpower: Do pinswitch ... reading GPADC) Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: 4.14+ <stable@vger.kernel.org> # 4.14+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Hans de Goede authored
commit 7d7b467c upstream. Some ACPI tables contain duplicate power resource references like this: Name (_PR0, Package (0x04) // _PR0: Power Resources for D0 { P28P, P18P, P18P, CLK4 }) This causes a WARN_ON in sysfs_add_link_to_group() because we end up adding a link to the same acpi_device twice: sysfs: cannot create duplicate filename '/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/808622C1:00/OVTI2680:00/power_resources_D0/LNXPOWER:0a' CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.12-301.fc29.x86_64 #1 Hardware name: Insyde CherryTrail/Type2 - Board Product Name, BIOS jumperx.T87.KFBNEEA02 04/13/2016 Call Trace: dump_stack+0x5c/0x80 sysfs_warn_dup.cold.3+0x17/0x2a sysfs_do_create_link_sd.isra.2+0xa9/0xb0 sysfs_add_link_to_group+0x30/0x50 acpi_power_expose_list+0x74/0xa0 acpi_power_add_remove_device+0x50/0xa0 acpi_add_single_object+0x26b/0x5f0 acpi_bus_check_add+0xc4/0x250 ... To address this issue, make acpi_extract_power_resources() check for duplicates and simply skip them when found. Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
-
