- 31 May, 2023 32 commits
-
-
Niklas Schnelle authored
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends not being declared. We thus need to add HAS_IOPORT as dependency for those drivers using them. Co-developed-by:
Arnd Bergmann <arnd@kernel.org> Signed-off-by:
Niklas Schnelle <schnelle@linux.ibm.com> Link: https://lore.kernel.org/r/20230522105049.1467313-22-schnelle@linux.ibm.comSigned-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Justin Tee authored
The kernel test robot reported sparse warnings regarding the improper usage of beXX_to_cpu() macros. Change the flagged FDMI and VMID member variables to __beXX and redo the beXX_to_cpu() macros appropriately. Signed-off-by:
Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20230530191405.21580-1-justintee8345@gmail.comReported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202305261159.lTW5NYrv-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202305260751.NWFvhLY5-lkp@intel.com/Signed-off-by:
-
Martin K. Petersen authored
Justin Tee <justintee8345@gmail.com> says: Update lpfc to revision 14.2.0.13 This patch set contains discovery bug fixes, firmware logging improvements, clean up of CQ handling, and statistics collection enhancements. The patches were cut against Martin's 6.5/scsi-queue tree. Link: https://lore.kernel.org/r/20230523183206.7728-1-justintee8345@gmail.comSigned-off-by:
-
Justin Tee authored
Update copyrights to 2023 for files modified in the 14.2.0.13 patch set. Signed-off-by:
-
Justin Tee authored
Update lpfc version to 14.2.0.13 Signed-off-by:
-
Justin Tee authored
Various improvements are made for collecting congestion statistics: - Pre-existing logic is replaced with use of an hrtimer for increased reporting accuracy. - Congestion timestamp information is reorganized into a single struct. - Common statistic collection logic is refactored into a helper routine. Signed-off-by:
-
Justin Tee authored
There is mishandling of SLI-4 CQE status values larger than what is allowed by the LPFC_IOCB_STATUS_MASK of 4 bits. The LPFC_IOCB_STATUS_MASK is a leftover SLI-3 construct and serves no purpose in SLI-4 path. Remove the LPFC_IOCB_STATUS_MASK and clean up general CQE status handling in SLI-4 completion paths. Signed-off-by:
-
Justin Tee authored
A firmware upgrade does not necessitate dumping of phba->dbg_log[] to kmsg via LOG_TRACE_EVENT. A simple KERN_NOTICE log message should suffice to notify the user of successful or unsuccessful firmware upgrade. As such, firmware upgrade log messages are updated to use KERN_NOTICE instead of LOG_TRACE_EVENT. Additionally, in order to notify the user of reset type for instantiating newly downloaded firmware, lpfc_log_msg's default KERN_LEVEL is updated to 5 or KERN_NOTICE. Signed-off-by:
-
Justin Tee authored
When NPIV ports are zoned to devices that support both initiator and target mode, a remote device's initiated PRLI results in unintended final kref clean up of the device's ndlp structure. This disrupts NPIV ports' discovery for target devices that support both initiator and target mode. Modify the NPIV lpfc_drop_node clause such that we allow the ndlp to live so long as it was in NLP_STE_PLOGI_ISSUE, NLP_STE_REG_LOGIN_ISSUE, or NLP_STE_PRLI_ISSUE nlp_state. This allows lpfc's issued PRLI completion routine to determine if the final kref clean up should execute rather than a remote device's issued PRLI. Fixes: db651ec2 ("scsi: lpfc: Correct used_rpi count when devloss tmo fires with no recovery") Signed-off-by:
-
Justin Tee authored
Pre-existing device loss recovery logic via the NLP_IN_RECOV_POST_DEV_LOSS flag only handled Fabric Port Login, Fabric Controller, Management, and Name Server addresses. Fabric domain controllers fall under the same category for usage of the NLP_IN_RECOV_POST_DEV_LOSS flag. Add a default case statement to mark an ndlp for device loss recovery. Signed-off-by:
Martin Wilck <mwilck@suse.com> Signed-off-by:
-
Justin Tee authored
In dev_loss_tmo callback routine, we early return if the ndlp is in a state of rediscovery. This occurs when a target proactively PLOGIs or PRLIs after an RSCN before the dev_loss_tmo callback routine is scheduled to run. Move clear of the NLP_IN_DEV_LOSS flag before the ndlp state check in such cases. Signed-off-by:
-
Justin Tee authored
Due to a target port D_ID swap, it is possible for the lpfc_register_remote_port() routine to touch post mortem fc_rport memory when trying to access fc_rport->dd_data. The D_ID swap causes a simultaneous call to lpfc_unregister_remote_port(), where fc_remote_port_delete() reclaims fc_rport memory. Remove the fc_rport->dd_data->pnode NULL assignment because the following line reassigns ndlp->rport with an fc_rport object from fc_remote_port_add() anyways. The pnode nullification is superfluous. Signed-off-by:
-
Azeem Shaikh authored
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). No return values were used, so direct replacement is safe. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89Signed-off-by:
Azeem Shaikh <azeemshaikh38@gmail.com> Link: https://lore.kernel.org/r/20230530164131.987213-1-azeemshaikh38@gmail.comReviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Azeem Shaikh authored
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). No return values were used, so direct replacement is safe. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89Signed-off-by:
Don Brace <don.brace@microchip.com> Signed-off-by:
-
Azeem Shaikh authored
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). No return values were used, so direct replacement is safe. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89Signed-off-by:
-
Azeem Shaikh authored
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). No return values were used, so direct replacement is safe. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89Signed-off-by:
-
Azeem Shaikh authored
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). No return values were used, so direct replacement is safe. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89Signed-off-by:
-
Azeem Shaikh authored
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). No return values were used, so direct replacement is safe. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89Signed-off-by:
-
Bartosz Golaszewski authored
Add the compatible string for the UFS on sa8775p platforms. Signed-off-by:
Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20230411130446.401440-2-brgl@bgdev.plReviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Avri Altman authored
Do not open code SZ_x. Signed-off-by:
Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20230531070009.4593-1-avri.altman@wdc.comReviewed-by:
Bean Huo <beanhuo@micron.com> Reviewed-by:
Stanley Chu <stanley.chu@mediatek.com> Reviewed-by:
Keoseong Park <keosung.park@samsung.com> Signed-off-by:
-
Martin K. Petersen authored
Bart Van Assche <bvanassche@acm.org> says: In the traces we recorded while testing zoned storage we noticed that UFS commands are requeued while the clock is being ungated. Command requeueing makes it harder than necessary to preserve the command order. Hence this patch series that modifies the SCSI core and also the UFS driver such that clock ungating does not trigger command requeueing. Link: https://lore.kernel.org/r/20230529202640.11883-1-bvanassche@acm.orgSigned-off-by:
-
Bart Van Assche authored
Ungating the clock asynchronously causes ufshcd_queuecommand() to return SCSI_MLQUEUE_HOST_BUSY and hence causes commands to be requeued. This is suboptimal. Allow ufshcd_queuecommand() to sleep such that clock ungating does not trigger command requeuing. Remove the ufshcd_scsi_block_requests() and ufshcd_scsi_unblock_requests() calls because these are no longer needed. The flush_work(&hba->clk_gating.ungate_work) call is sufficient to make the SCSI core wait for clock ungating to complete. Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230529202640.11883-6-bvanassche@acm.orgReviewed-by:
Bao D. Nguyen <quic_nguyenb@quicinc.com> Signed-off-by:
-
Bart Van Assche authored
ufshcd_hold() and ufshcd_release are declared twice: once in drivers/ufs/core/ufshcd-priv.h and a second time in include/ufs/ufshcd.h. Remove the declarations from ufshcd-priv.h. Fixes: dd11376b ("scsi: ufs: Split the drivers/scsi/ufs directory") Signed-off-by:
-
Bart Van Assche authored
Prepare for adding code in ufshcd_queuecommand() that may sleep. Acked-by:
-
Bart Van Assche authored
Prepare for adding code in ufshcd_queuecommand() that may sleep. This patch is similar to a patch posted last year by Mike Christie. See also https://lore.kernel.org/all/20220308003957.123312-2-michael.christie@oracle.com/ Cc: Mike Christie <michael.christie@oracle.com> Signed-off-by:
-
Bart Van Assche authored
Make scsi_host_block() easier to read by converting it to the widely used early-return style. See also commit f983622a ("scsi: core: Avoid calling synchronize_rcu() for each device in scsi_host_block()"). Reviewed-by:
Mike Christie <michael.christie@oracle.com> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Cc: Ye Bin <yebin10@huawei.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Christophe JAILLET authored
'inq_result' is known to be NULL. There is no point calling kfree(). Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/08740635cdb0f8293e57c557b22e048daae50961.1685345683.git.christophe.jaillet@wanadoo.frReviewed-by:
Paolo Bonzini <pbonzini@redhat.com> Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
-
Damien Le Moal authored
Add missing description of the spg argument of ata_msense_control(). Fixes: df60f9c6 ("scsi: ata: libata: Add ATA feature control sub-page translation") Signed-off-by:
Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20230523074701.293502-1-dlemoal@kernel.orgReviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by:
-
Dan Carpenter authored
This loop will exit successfully when "found" is false or in the failure case it times out with "wait_iter" set to -1. The test for timeouts is impossible as is. Fixes: b843adde ("scsi: qla2xxx: Fix mem access after free") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/cea5a62f-b873-4347-8f8e-c67527ced8d2@kili.mountainSigned-off-by:
-
Bart Van Assche authored
Instead of running the request queue of each device associated with a host every 3 ms (BLK_MQ_RESOURCE_DELAY) while host error handling is in progress, run the request queue after error handling has finished. Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: John Garry <john.g.garry@oracle.com> Cc: Mike Christie <michael.christie@oracle.com> Signed-off-by:
-
Bart Van Assche authored
If a command fails, SCSI sense data is essential to determine why it failed. Hence make the sense key, ASC and ASCQ codes available in the ftrace output. Cc: Niklas Cassel <niklas.cassel@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: John Garry <john.g.garry@oracle.com> Cc: Mike Christie <michael.christie@oracle.com> Signed-off-by:
-
Bart Van Assche authored
Use min() instead of open-coding it in scsi_normalize_sense(). Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Benjamin Block <bblock@linux.ibm.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
- 22 May, 2023 8 commits
-
-
Randy Dunlap authored
Make the chapter heading concise yet still descriptive. This makes the subsystem table of contents more readable (IMO). Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230518212749.18266-12-rdunlap@infradead.org Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by:
-
Randy Dunlap authored
Make the chapter heading concise yet still descriptive. This makes the subsystem table of contents more readable (IMO). Signed-off-by:
-
Randy Dunlap authored
Include "Megaraid" in the chapter heading so that it is clear what subject the document is about. This improves viewing in the TOC. Signed-off-by:
-
Randy Dunlap authored
Make the chapter heading be concise yet still descriptive. This makes the subsystem table of contents more readable (IMO). Signed-off-by:
Finn Thain <fthain@linux-m68k.org> Signed-off-by:
-
Randy Dunlap authored
Make the heading be concise yet still descriptive. This makes the subsystem table of contents more readable (IMO). Spell "CDROM" as "CD-ROM". Capitalize "Linux". Use https instead of http for URLs. Drop the Linux Documentation Project URL for the SCSI generic HOWTO since it hasn't been updated since 2002. Use Doug Gilbert's URL for it instead. Drop some outdated documentation & references. Signed-off-by:
-
Randy Dunlap authored
Fix the typo "Tansport" to be "Transport". Update email address for James Smart. Signed-off-by:
-
Randy Dunlap authored
Make the heading be concise yet still descriptive. This makes the subsystem table of contents more readable (IMO). Signed-off-by:
-
Randy Dunlap authored
Make the heading be concise yet still descriptive. This makes the subsystem table of contents more readable (IMO). Signed-off-by:
-
