- 26 Mar, 2012 40 commits
-
-
Artem Bityutskiy authored
This header is tiny and contains only pmc551-private stuff, so it should not live in 'include/linux' - let's just merge it with pmc551.c. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
The MTD API function now zero the 'retlen' parameter before calling the driver's method — do not do this again in drivers. This removes duplicated '*retlen = 0' assignent from the following methods: 'mtd_point()' 'mtd_read()' 'mtd_write()' 'mtd_writev()' 'mtd_panic_write()' Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
Many drivers check whether the partition is R/O and return -EROFS if yes. Let's stop having duplicated checks and move them to the API functions instead. And again a bit of noise - deleted few too sparse newlines, sorry. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
We already verify that offset and length are within the MTD device size in the MTD API functions. Let's remove the duplicated checks in drivers. This patch only affects the following API's: 'mtd_erase()' 'mtd_point()' 'mtd_unpoint()' 'mtd_get_unmapped_area()' 'mtd_read()' 'mtd_write()' 'mtd_panic_write()' 'mtd_lock()' 'mtd_unlock()' 'mtd_is_locked()' 'mtd_block_isbad()' 'mtd_block_markbad()' This patch adds a bit of noise by removing too sparse empty lines, but this is not too bad. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
Add verification of the offset and length to MTD API functions and verify that MTD device offset and length are within MTD device size. The modified API functions are: 'mtd_erase()' 'mtd_point()' 'mtd_unpoint()' 'mtd_get_unmapped_area()' 'mtd_read()' 'mtd_write()' 'mtd_panic_write()' 'mtd_lock()' 'mtd_unlock()' 'mtd_is_locked()' 'mtd_block_isbad()' 'mtd_block_markbad()' This patch also uninlines these functions and exports in mtdcore.c because they are not performance-critical and do not have to be inlined. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
The 'mtd_unpoint()' API function should be able to return an error code because it may fail if you specify incorrect offset. This patch changes this MTD API function and amends all the drivers correspondingly. Also return '-EOPNOTSUPP' from 'mtd_unpoint()' when the '->unpoint()' method is undefined. We do not really need this currently, but this just makes sense to be consistent with 'mtd_point()'. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Brian Norris authored
Currently, the flash-based BBT implementation writes bad block data only to its flash-based table and not to the OOB marker area. Then, as new bad blocks are marked over time, the OOB markers become incomplete and the flash-based table becomes the only source of current bad block information. This becomes an obvious problem when, for example: * bootloader cannot read the flash-based BBT format * BBT is corrupted and the flash must be rescanned for bad blocks; we want to remember bad blocks that were marked from Linux So to keep the bad block markers in sync with the flash-based BBT, this patch changes the default so that we write bad block markers to the proper OOB area on each block in addition to flash-based BBT. Comments are updated, expanded, and/or relocated as necessary. The new flash-based BBT procedure for marking bad blocks: (1) erase the affected block, to allow OOB marker to be written cleanly (2) update in-memory BBT (3) write bad block marker to OOB area of affected block (4) update flash-based BBT Note that we retain the first error encountered in (3) or (4), finish the procedures, and dump the error in the end. This should handle power cuts gracefully enough. (1) and (2) are mostly harmless (note that (1) will not erase an already-recognized bad block). The OOB and BBT may be "out of sync" if we experience power loss bewteen (3) and (4), but we can reasonably expect that on next boot, subsequent I/O operations will discover that the block should be marked bad again, thus re-syncing the OOB and BBT. Note that this is a change from the previous default flash-based BBT behavior. If your system cannot support writing bad block markers to OOB, use the new NAND_BBT_NO_OOB_BBM option (in combination with NAND_BBT_USE_FLASH and NAND_BBT_NO_OOB). Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
We do not need to invoke 'mtd_can_have_bb()' before invoking 'mtd_block_isbad()' because the latter already handles the case when the MTD device does not support bad blocks. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
Let's remove useless 'mtd_can_have_bb()' function invocations. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
The main 'mtd_block_markbad()' function returns -EOPNOTSUPP if the '->block_markbad' method is undefined, and mtdconcat should do the same. Fix this by simply removing the 'mtd_can_have_bb()' because it is not really necessary. It could be treated as an optimization, but this function is expected to be used so rarely that it does not matter. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
The writebufsize concept was introduce by commit "0e4ca7e5 mtd: add writebufsize field to mtd_info struct" and it represents the maximum amount of data the device writes to the media at a time. This is an important parameter for UBIFS which is used during recovery and which basically defines how big a corruption caused by a power cut can be. Set writebufsize to the flash page size because it is the maximum amount of data it writes at a time. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: stable@kernel.org [2.6.38+] Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
The writebufsize concept was introduce by commit "0e4ca7e5 mtd: add writebufsize field to mtd_info struct" and it represents the maximum amount of data the device writes to the media at a time. This is an important parameter for UBIFS which is used during recovery and which basically defines how big a corruption caused by a power cut can be. Set writebufsize to the flash page size because it is the maximum amount of data it writes at a time. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by:
Stefan Roese <sr@denx.de> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
The writebufsize concept was introduce by commit "0e4ca7e5 mtd: add writebufsize field to mtd_info struct" and it represents the maximum amount of data the device writes to the media at a time. This is an important parameter for UBIFS which is used during recovery and which basically defines how big a corruption caused by a power cut can be. Set writebufsize to 4 because this drivers writes at max 4 bytes at a time. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: stable@kernel.org [2.6.38+] Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
The writebufsize concept was introduce by commit "0e4ca7e5 mtd: add writebufsize field to mtd_info struct" and it represents the maximum amount of data the device writes to the media at a time. This is an important parameter for UBIFS which is used during recovery and which basically defines how big a corruption caused by a power cut can be. Set it to be equivalent to mtd->writesize because this is the maximum amount of data the driver writes at a time. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by:
Robert Jarzmik <robert.jarzmik@free.fr> Cc: stable@kernel.org [3.2+] Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
The writebufsize concept was introduce by commit "0e4ca7e5 mtd: add writebufsize field to mtd_info struct" and it represents the maximum amount of data the device writes to the media at a time. This is an important parameter for UBIFS which is used during recovery and which basically defines how big a corruption caused by a power cut can be. Set it to be equivalent to mtd->writesize because this is the maximum amount of data the driver writes at a time. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: stable@kernel.org [2.6.38+] Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
The writebufsize concept was introduce by commit "0e4ca7e5 mtd: add writebufsize field to mtd_info struct" and it represents the maximum amount of data the device writes to the media at a time. This is an important parameter for UBIFS which is used during recovery and which basically defines how big a corruption caused by a power cut can be. Set it to be equivalent to mtd->writesize because this is the maximum amount of data the driver writes at a time. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: stable@kernel.org [2.6.38+] Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
The writebufsize concept was introduce by commit "0e4ca7e5 mtd: add writebufsize field to mtd_info struct" and it represents the maximum amount of data the device writes to the media at a time. This is an important parameter for UBIFS which is used during recovery and which basically defines how big a corruption caused by a power cut can be. Set it to be equivalent to mtd->writesize because this is the maximum amount of data the driver writes at a time. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: stable@kernel.org [2.6.38+] Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
The writebufsize concept was introduce by commit "0e4ca7e5 mtd: add writebufsize field to mtd_info struct" and it represents the maximum amount of data the device writes to the media at a time. This is an important parameter for UBIFS which is used during recovery and which basically defines how big a corruption caused by a power cut can be. However, we forgot to set this parameter for block2mtd. Set it to PAGE_SIZE because this is actually the amount of data we write at a time. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by:
Joern Engel <joern@lazybastard.org> Cc: stable@kernel.org [2.6.38+] Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Joe Perches authored
Per call site OOM messages are unnecessary. k.alloc and v.alloc failures use dump_stack(). Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Dan Carpenter authored
Gcc complains here: drivers/mtd/nand/docg4.c: In function ‘probe_docg4’: drivers/mtd/nand/docg4.c:1277:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘resource_size_t’ [-Wformat] drivers/mtd/nand/docg4.c:1277:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 4 has type ‘resource_size_t’ [-Wformat] We have a standard way of printing these using a format string extension. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Wolfram Sang authored
This has been moved from .options to .bbt_options meanwhile. So, it currently checks for something totally different (NAND_OWN_BUFFERS) and decides according to that. Artem Bityutskiy: the options were moved in a40f7341 mtd: nand: consolidate redundant flash-based BBT flags Artem Bityutskiy: CCing -stable Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Acked-by:
Huang Shijie <b32955@freescale.com> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: stable@kernel.org [3.2+] Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Brian Norris authored
Using UBI on m25p80 can give messages like: UBI error: io_init: bad write buffer size 0 for 1 min. I/O unit We need to initialize writebufsize; I think "page_size" is the correct "bufsize", although I'm not sure. Comments? Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: stable@kernel.org [2.6.38+] Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Brian Norris authored
We don't need to to check for mtd->resume before calling mtd_resume(). mtd_resume() should take care of that. Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Masanari Iida authored
Correct spelling "scaning" to scanning" in fs/jffs2/scan.c Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
This patch renames all MTD functions by adding a "_" prefix: mtd->erase -> mtd->_erase mtd->read_oob -> mtd->_read_oob ... The reason is that we are re-working the MTD API and from now on it is an error to use MTD function pointers directly - we have a corresponding API call for every pointer. By adding a leading "_" we achieve the following: 1. Make sure we convert every direct pointer users 2. A leading "_" suggests that this interface is internal and it becomes less likely that people will use them directly 3. Make sure all the out-of-tree modules stop compiling and the owners spot the big API change and amend them. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Brian Norris authored
There were a few instances of the old MTD interface remaining for JFFS2. We fix one error that shows up (only when CONFIG_JFFS2_FS_WRITEBUFFER is not defined) like this: fs/jffs2/read.c: In function 'jffs2_read_dnode': fs/jffs2/read.c:36:8: error: 'struct mtd_info' has no member named 'read' fs/jffs2/read.c:112:8: error: 'struct mtd_info' has no member named 'read' ... We also simply remove two macros that are not in use, were not updated to the new MTD interface, and don't even utilize the old interface properly. (That means they weren't used since commit 8593fbc6, year 2006; almost 6 years ago, for those who don't want to do the math) Reported-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Acked-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
We have changed the MTD API and now ROMFS should use 'mtd_read()' instead of mtd->read(). Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
Commit 10934478 did not remove now useless "if (mtd->point)" check mistakingly - let's kill it now. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Mike Dunn authored
This patch adds a driver for the M-Sys / Sandisk diskonchip G4 nand flash found in various smartphones and PDAs, among them the Palm Treo680, HTC Prophet and Wizard, Toshiba Portege G900, Asus P526, and O2 XDA Zinc. It was tested on the Treo 680, but should work generically. Since v3, this patch adds power management functions, a scan of the factory bad block table during initialization, several fixes, and more extensive testing. Also, the platform data header file, which only contained partitioning information, was removed. Command-line partitioning can be used, at least until an mtd parser is written for the saftl format with which these chips are shipped. Signed-off-by:
Mike Dunn <mikedunn@newsguy.com> Reviewed-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Stefan Roese authored
Signed-off-by:
Stefan Roese <sr@denx.de> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Axel Lin authored
This patch converts the drivers in drivers/mtd/* to use the module_spi_driver() macro which makes the code smaller and a bit simpler. Signed-off-by:
Axel Lin <axel.lin@gmail.com> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Brian Norris authored
As nand_default_block_markbad() is becoming more complex, it helps to have code appear only in its relevant codepath(s). Here, the calculation of `ofs' based on NAND_BBT_SCANLASTPAGE is only useful on paths where we write bad block markers to OOB. We move the condition/calculation closer to the `write' operation and update the comment to more correctly describe the operation. The variable `wr_ofs' is also used to help isolate our calculation of the "write" offset from the usage of `ofs' to represent the eraseblock offset. This will become useful when we reorder operations in the next patch. This patch should make no functional change. Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Brian Norris authored
The mtdoops usage instructions found in Kconfig have been incorrect since: commit 2e386e4b mtd: mtdoops: refactor as a kmsg_dumper mtdoops no longer uses a console. Now, if you build it into your kernel, you add something like the following to your command line to select partition X as your logging partition: mtdoops.mtddev=X Anyway, it seems better to leave the documentation out of Kconfig. Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Russell King - ARM Linux authored
/* * This is here for documentation purposes only - until these people * submit their machine types. It will be gone January 2005. */ It's now seven years after that date, so let's remove this. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Russell King - ARM Linux authored
Commit c4a9f88d ([MTD] [NOR] fix ctrl-alt-del can't reboot for intel flash bug) interferes with this work-around, causing MTD to issue this warning: Flash device refused suspend due to active operation (state 0) The commit makes our work-around in the map driver unnecessary, so let's remove it. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Shiraz Hashim authored
Driver must cleanup all held resources during remove. It wasn't releasing requested memory region. Signed-off-by:
Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by:
Stefan Roese <sr@denx.de> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Shiraz Hashim authored
SPEAr platforms (spear3xx/spear6xx/spear13xx) provide SMI (Serial Memory Interface) controller to access serial NOR flash. SMI provides a simple interface for SPI/serial NOR flashes and has certain inbuilt commands and features to support these flashes easily. It also makes it possible to map an address range in order to directly access (read/write) the SNOR over address bus. This patch intends to provide serial nor driver support for spear platforms which are accessed through SMI. Signed-off-by:
Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by:
Viresh Kumar <viresh.kumar@st.com> Signed-off-by:
Stefan Roese <sr@denx.de> Signed-off-by:
Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Brian Norris authored
The description for badblockbits is incorrect. I think someone just made up a false description on the spot to satisfy some kerneldoc warning. Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Brian Norris authored
It seems that we have developed a bad-block-marking "feature" out of pure laziness: "We write two bytes per location, so we dont have to mess with 16 bit access." It's relatively simple to write a 1 byte at a time on x8 devices and 2 bytes at a time on x16 devices, so let's do it. Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-