If the processor exits to KVM while delivering an interrupt,
the hypervisor then requeues the interrupt for the next vmentry.
Trying to enter SMM in this same window causes to enter non-root
mode in emulated SMM (i.e. with IF=0) and with a request to
inject an IRQ (i.e. with a valid VM-entry interrupt info field).
This is invalid guest state (SDM 26.3.1.4 "Check on Guest RIP
and RFLAGS") and the processor fails vmentry.

The fix is to defer the injection from KVM_REQ_SMI to KVM_REQ_EVENT,
like we already do for e.g. NMIs.  This patch doesn't change the
name of the process_smi function so that it can be applied to
stable releases.  The next patch will modify the names so that
process_nmi and process_smi handle respectively KVM_REQ_NMI and
KVM_REQ_SMI.

This is especially common with Windows, probably due to the
self-IPI trick that it uses to deliver deferred procedure
calls (DPCs).
Reported-by: Laszlo Ersek <lersek@redhat.com>
Reported-by: Michał Zegan <webczat_200@poczta.onet.pl>
Fixes: 64d60670
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Pull KVM fixes from Radim Krčmář:
 "ARM:
   - two fixes for 4.6 vgic [Christoffer] (cc stable)

   - six fixes for 4.7 vgic [Marc]

  x86:
   - six fixes from syzkaller reports [Paolo] (two of them cc stable)

   - allow OS X to boot [Dmitry]

   - don't trust compilers [Nadav]"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: fix OOPS after invalid KVM_SET_DEBUGREGS
  KVM: x86: avoid vmalloc(0) in the KVM_SET_CPUID
  KVM: irqfd: fix NULL pointer dereference in kvm_irq_map_gsi
  KVM: fail KVM_SET_VCPU_EVENTS with invalid exception number
  KVM: x86: avoid vmalloc(0) in the KVM_SET_CPUID
  kvm: x86: avoid warning on repeated KVM_SET_TSS_ADDR
  KVM: Handle MSR_IA32_PERF_CTL
  KVM: x86: avoid write-tearing of TDP
  KVM: arm/arm64: vgic-new: Removel harmful BUG_ON
  arm64: KVM: vgic-v3: Relax synchronization when SRE==1
  arm64: KVM: vgic-v3: Prevent the guest from messing with ICC_SRE_EL1
  arm64: KVM: Make ICC_SRE_EL1 access return the configured SRE value
  KVM: arm/arm64: vgic-v3: Always resample level interrupts
  KVM: arm/arm64: vgic-v2: Always resample level interrupts
  KVM: arm/arm64: vgic-v3: Clear all dirty LRs
  KVM: arm/arm64: vgic-v2: Clear all dirty LRs

MOV to DR6 or DR7 causes a #GP if an attempt is made to write a 1 to
any of bits 63:32.  However, this is not detected at KVM_SET_DEBUGREGS
time, and the next KVM_RUN oopses:

   general protection fault: 0000 [#1] SMP
   CPU: 2 PID: 14987 Comm: a.out Not tainted 4.4.9-300.fc23.x86_64 #1
   Hardware name: LENOVO 2325F51/2325F51, BIOS G2ET32WW (1.12 ) 05/30/2012
   [...]
   Call Trace:
    [<ffffffffa072c93d>] kvm_arch_vcpu_ioctl_run+0x141d/0x14e0 [kvm]
    [<ffffffffa071405d>] kvm_vcpu_ioctl+0x33d/0x620 [kvm]
    [<ffffffff81241648>] do_vfs_ioctl+0x298/0x480
    [<ffffffff812418a9>] SyS_ioctl+0x79/0x90
    [<ffffffff817a0f2e>] entry_SYSCALL_64_fastpath+0x12/0x71
   Code: 55 83 ff 07 48 89 e5 77 27 89 ff ff 24 fd 90 87 80 81 0f 23 fe 5d c3 0f 23 c6 5d c3 0f 23 ce 5d c3 0f 23 d6 5d c3 0f 23 de 5d c3 <0f> 23 f6 5d c3 0f 0b 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00
   RIP  [<ffffffff810639eb>] native_set_debugreg+0x2b/0x40
    RSP <ffff88005836bd50>

Testcase (beautified/reduced from syzkaller output):

    #include <unistd.h>
    #include <sys/syscall.h>
    #include <string.h>
    #include <stdint.h>
    #include <linux/kvm.h>
    #include <fcntl.h>
    #include <sys/ioctl.h>

    long r[8];

    int main()
    {
        struct kvm_debugregs dr = { 0 };

        r[2] = open("/dev/kvm", O_RDONLY);
        r[3] = ioctl(r[2], KVM_CREATE_VM, 0);
        r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7);

        memcpy(&dr,
               "\x5d\x6a\x6b\xe8\x57\x3b\x4b\x7e\xcf\x0d\xa1\x72"
               "\xa3\x4a\x29\x0c\xfc\x6d\x44\x00\xa7\x52\xc7\xd8"
               "\x00\xdb\x89\x9d\x78\xb5\x54\x6b\x6b\x13\x1c\xe9"
               "\x5e\xd3\x0e\x40\x6f\xb4\x66\xf7\x5b\xe3\x36\xcb",
               48);
        r[7] = ioctl(r[4], KVM_SET_DEBUGREGS, &dr);
        r[6] = ioctl(r[4], KVM_RUN, 0);
    }
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

This causes an ugly dmesg splat.  Beautified syzkaller testcase:

    #include <unistd.h>
    #include <sys/syscall.h>
    #include <sys/ioctl.h>
    #include <fcntl.h>
    #include <linux/kvm.h>

    long r[8];

    int main()
    {
        struct kvm_irq_routing ir = { 0 };
        r[2] = open("/dev/kvm", O_RDWR);
        r[3] = ioctl(r[2], KVM_CREATE_VM, 0);
        r[4] = ioctl(r[3], KVM_SET_GSI_ROUTING, &ir);
        return 0;
    }
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Found by syzkaller:

    BUG: unable to handle kernel NULL pointer dereference at 0000000000000120
    IP: [<ffffffffa0797202>] kvm_irq_map_gsi+0x12/0x90 [kvm]
    PGD 6f80b067 PUD b6535067 PMD 0
    Oops: 0000 [#1] SMP
    CPU: 3 PID: 4988 Comm: a.out Not tainted 4.4.9-300.fc23.x86_64 #1
    [...]
    Call Trace:
     [<ffffffffa0795f62>] irqfd_update+0x32/0xc0 [kvm]
     [<ffffffffa0796c7c>] kvm_irqfd+0x3dc/0x5b0 [kvm]
     [<ffffffffa07943f4>] kvm_vm_ioctl+0x164/0x6f0 [kvm]
     [<ffffffff81241648>] do_vfs_ioctl+0x298/0x480
     [<ffffffff812418a9>] SyS_ioctl+0x79/0x90
     [<ffffffff817a1062>] tracesys_phase2+0x84/0x89
    Code: b5 71 a7 e0 5b 41 5c 41 5d 5d f3 c3 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 8b 8f 10 2e 00 00 31 c0 48 89 e5 <39> 91 20 01 00 00 76 6a 48 63 d2 48 8b 94 d1 28 01 00 00 48 85
    RIP  [<ffffffffa0797202>] kvm_irq_map_gsi+0x12/0x90 [kvm]
     RSP <ffff8800926cbca8>
    CR2: 0000000000000120

Testcase:

    #include <unistd.h>
    #include <sys/syscall.h>
    #include <string.h>
    #include <stdint.h>
    #include <linux/kvm.h>
    #include <fcntl.h>
    #include <sys/ioctl.h>

    long r[26];

    int main()
    {
        memset(r, -1, sizeof(r));
        r[2] = open("/dev/kvm", 0);
        r[3] = ioctl(r[2], KVM_CREATE_VM, 0);

        struct kvm_irqfd ifd;
        ifd.fd = syscall(SYS_eventfd2, 5, 0);
        ifd.gsi = 3;
        ifd.flags = 2;
        ifd.resamplefd = ifd.fd;
        r[25] = ioctl(r[3], KVM_IRQFD, &ifd);
        return 0;
    }
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

This cannot be returned by KVM_GET_VCPU_EVENTS, so it is okay to return
EINVAL.  It causes a WARN from exception_type:

    WARNING: CPU: 3 PID: 16732 at arch/x86/kvm/x86.c:345 exception_type+0x49/0x50 [kvm]()
    CPU: 3 PID: 16732 Comm: a.out Tainted: G        W       4.4.6-300.fc23.x86_64 #1
    Hardware name: LENOVO 2325F51/2325F51, BIOS G2ET32WW (1.12 ) 05/30/2012
     0000000000000286 000000006308a48b ffff8800bec7fcf8 ffffffff813b542e
     0000000000000000 ffffffffa0966496 ffff8800bec7fd30 ffffffff810a40f2
     ffff8800552a8000 0000000000000000 00000000002c267c 0000000000000001
    Call Trace:
     [<ffffffff813b542e>] dump_stack+0x63/0x85
     [<ffffffff810a40f2>] warn_slowpath_common+0x82/0xc0
     [<ffffffff810a423a>] warn_slowpath_null+0x1a/0x20
     [<ffffffffa0924809>] exception_type+0x49/0x50 [kvm]
     [<ffffffffa0934622>] kvm_arch_vcpu_ioctl_run+0x10a2/0x14e0 [kvm]
     [<ffffffffa091c04d>] kvm_vcpu_ioctl+0x33d/0x620 [kvm]
     [<ffffffff81241248>] do_vfs_ioctl+0x298/0x480
     [<ffffffff812414a9>] SyS_ioctl+0x79/0x90
     [<ffffffff817a04ee>] entry_SYSCALL_64_fastpath+0x12/0x71
    ---[ end trace b1a0391266848f50 ]---

Testcase (beautified/reduced from syzkaller output):

    #include <unistd.h>
    #include <sys/syscall.h>
    #include <string.h>
    #include <stdint.h>
    #include <fcntl.h>
    #include <sys/ioctl.h>
    #include <linux/kvm.h>

    long r[31];

    int main()
    {
        memset(r, -1, sizeof(r));
        r[2] = open("/dev/kvm", O_RDONLY);
        r[3] = ioctl(r[2], KVM_CREATE_VM, 0);
        r[7] = ioctl(r[3], KVM_CREATE_VCPU, 0);

        struct kvm_vcpu_events ve = {
                .exception.injected = 1,
                .exception.nr = 0xd4
        };
        r[27] = ioctl(r[7], KVM_SET_VCPU_EVENTS, &ve);
        r[30] = ioctl(r[7], KVM_RUN, 0);
        return 0;
    }
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

This causes an ugly dmesg splat.  Beautified syzkaller testcase:

    #include <unistd.h>
    #include <sys/syscall.h>
    #include <sys/ioctl.h>
    #include <fcntl.h>
    #include <linux/kvm.h>

    long r[8];

    int main()
    {
        struct kvm_cpuid2 c = { 0 };
        r[2] = open("/dev/kvm", O_RDWR);
        r[3] = ioctl(r[2], KVM_CREATE_VM, 0);
        r[4] = ioctl(r[3], KVM_CREATE_VCPU, 0x8);
        r[7] = ioctl(r[4], KVM_SET_CPUID, &c);
        return 0;
    }
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Found by syzkaller:

    WARNING: CPU: 3 PID: 15175 at arch/x86/kvm/x86.c:7705 __x86_set_memory_region+0x1dc/0x1f0 [kvm]()
    CPU: 3 PID: 15175 Comm: a.out Tainted: G        W       4.4.6-300.fc23.x86_64 #1
    Hardware name: LENOVO 2325F51/2325F51, BIOS G2ET32WW (1.12 ) 05/30/2012
     0000000000000286 00000000950899a7 ffff88011ab3fbf0 ffffffff813b542e
     0000000000000000 ffffffffa0966496 ffff88011ab3fc28 ffffffff810a40f2
     00000000000001fd 0000000000003000 ffff88014fc50000 0000000000000000
    Call Trace:
     [<ffffffff813b542e>] dump_stack+0x63/0x85
     [<ffffffff810a40f2>] warn_slowpath_common+0x82/0xc0
     [<ffffffff810a423a>] warn_slowpath_null+0x1a/0x20
     [<ffffffffa09251cc>] __x86_set_memory_region+0x1dc/0x1f0 [kvm]
     [<ffffffffa092521b>] x86_set_memory_region+0x3b/0x60 [kvm]
     [<ffffffffa09bb61c>] vmx_set_tss_addr+0x3c/0x150 [kvm_intel]
     [<ffffffffa092f4d4>] kvm_arch_vm_ioctl+0x654/0xbc0 [kvm]
     [<ffffffffa091d31a>] kvm_vm_ioctl+0x9a/0x6f0 [kvm]
     [<ffffffff81241248>] do_vfs_ioctl+0x298/0x480
     [<ffffffff812414a9>] SyS_ioctl+0x79/0x90
     [<ffffffff817a04ee>] entry_SYSCALL_64_fastpath+0x12/0x71

Testcase:

    #include <unistd.h>
    #include <sys/ioctl.h>
    #include <fcntl.h>
    #include <string.h>
    #include <linux/kvm.h>

    long r[8];

    int main()
    {
        memset(r, -1, sizeof(r));
	r[2] = open("/dev/kvm", O_RDONLY|O_TRUNC);
        r[3] = ioctl(r[2], KVM_CREATE_VM, 0x0ul);
        r[5] = ioctl(r[3], KVM_SET_TSS_ADDR, 0x20000000ul);
        r[7] = ioctl(r[3], KVM_SET_TSS_ADDR, 0x20000000ul);
        return 0;
    }
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Intel CPUs having Turbo Boost feature implement an MSR to provide a
control interface via rdmsr/wrmsr instructions. One could detect the
presence of this feature by issuing one of these instructions and
handling the #GP exception which is generated in case the referenced MSR
is not implemented by the CPU.

KVM's vCPU model behaves exactly as a real CPU in this case by injecting
a fault when MSR_IA32_PERF_CTL is called (which KVM does not support).
However, some operating systems use this register during an early boot
stage in which their kernel is not capable of handling #GP correctly,
causing #DP and finally a triple fault effectively resetting the vCPU.

This patch implements a dummy handler for MSR_IA32_PERF_CTL to avoid the
crashes.
Signed-off-by: Dmitry Bilunov <kmeaw@yandex-team.ru>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

In theory, nothing prevents the compiler from write-tearing PTEs, or
split PTE writes. These partially-modified PTEs can be fetched by other
cores and cause mayhem. I have not really encountered such case in
real-life, but it does seem possible.

For example, the compiler may try to do something creative for
kvm_set_pte_rmapp() and perform multiple writes to the PTE.
Signed-off-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

KVM/ARM Fixes for v4.7-rc2

Fixes for the vgic, 2 of the patches address a bug introduced in v4.6
while the rest are for the new vgic.

When changing the active bit from an MMIO trap, we decide to
explode if the intid is that of a private interrupt.

This flawed logic comes from the fact that we were assuming that
kvm_vcpu_kick() as called by kvm_arm_halt_vcpu() would not return before
the called vcpu responded, but this is not the case, so we need to
perform this wait even for private interrupts.

Dropping the BUG_ON seems like the right thing to do.

 [ Commit message tweaked by Christoffer ]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

Pull pin control fixes from Linus Walleij:
 "Here are three pin control fixes for v4.7.  Not much, and just driver
  fixes:

   - add device tree matches to MAINTAINERS

   - inversion bug in the Nomadik driver

   - dual edge handling bug in the mediatek driver"

* tag 'pinctrl-v4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: mediatek: fix dual-edge code defect
  MAINTAINERS: Add file patterns for pinctrl device tree bindings
  pinctrl: nomadik: fix inversion of gpio direction

Pull dma-buf updates from Sumit Semwal:

 - use of vma_pages instead of explicit computation

 - DocBook and headerdoc updates for dma-buf

* tag 'dma-buf-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sumits/dma-buf:
  dma-buf: use vma_pages()
  fence: add missing descriptions for fence
  doc: update/fixup dma-buf related DocBook
  reservation: add headerdoc comments
  dma-buf: headerdoc fixes

Pull networking fixes from David Miller:

 1) Fix negative error code usage in ATM layer, from Stefan Hajnoczi.

 2) If CONFIG_SYSCTL is disabled, the default TTL is not initialized
    properly.  From Ezequiel Garcia.

 3) Missing spinlock init in mvneta driver, from Gregory CLEMENT.

 4) Missing unlocks in hwmb error paths, also from Gregory CLEMENT.

 5) Fix deadlock on team->lock when propagating features, from Ivan
    Vecera.

 6) Work around buffer offset hw bug in alx chips, from Feng Tang.

 7) Fix double listing of SCTP entries in sctp_diag dumps, from Xin
    Long.

 8) Various statistics bug fixes in mlx4 from Eric Dumazet.

 9) Fix some randconfig build errors wrt fou ipv6 from Arnd Bergmann.

10) All of l2tp was namespace aware, but the ipv6 support code was not
    doing so.  From Shmulik Ladkani.

11) Handle on-stack hrtimers properly in pktgen, from Guenter Roeck.

12) Propagate MAC changes properly through VLAN devices, from Mike
    Manning.

13) Fix memory leak in bnx2x_init_one(), from Vitaly Kuznetsov.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits)
  sfc: Track RPS flow IDs per channel instead of per function
  usbnet: smsc95xx: fix link detection for disabled autonegotiation
  virtio_net: fix virtnet_open and virtnet_probe competing for try_fill_recv
  bnx2x: avoid leaking memory on bnx2x_init_one() failures
  fou: fix IPv6 Kconfig options
  openvswitch: update checksum in {push,pop}_mpls
  sctp: sctp_diag should dump sctp socket type
  net: fec: update dirty_tx even if no skb
  vlan: Propagate MAC address to VLANs
  atm: iphase: off by one in rx_pkt()
  atm: firestream: add more reserved strings
  vxlan: Accept user specified MTU value when create new vxlan link
  net: pktgen: Call destroy_hrtimer_on_stack()
  timer: Export destroy_hrtimer_on_stack()
  net: l2tp: Make l2tp_ip6 namespace aware
  Documentation: ip-sysctl.txt: clarify secure_redirects
  sfc: use flow dissector helpers for aRFS
  ieee802154: fix logic error in ieee802154_llsec_parse_dev_addr
  net: nps_enet: Disable interrupts before napi reschedule
  net/lapb: tuse %*ph to dump buffers
  ...

Pull sparc fixes from David Miller:
 "sparc64 mmu context allocation and trap return bug fixes"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Fix return from trap window fill crashes.
  sparc: Harden signal return frame checks.
  sparc64: Take ctx_alloc_lock properly in hugetlb_setup().

Otherwise we get confused when two flows on different channels get the
 same flow ID.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To detect link status up/down for connections where autonegotiation is
explicitly disabled, we don't get an irq but need to poll the status
register for link up/down detection.
This patch adds a workqueue to poll for link status.
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In function virtnet_open() and virtnet_probe(), func try_fill_recv() may
be executed at the same time. VQ in virtqueue_add() has not been protected
well and BUG_ON will be triggered when virito_net.ko being removed.
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x_init_bp() allocates memory with bnx2x_alloc_mem_bp() so if we
fail later in bnx2x_init_one() we need to free this memory
with bnx2x_free_mem_bp() to avoid leakages. E.g. I'm observing memory
leaks reported by kmemleak when a failure (unrelated) happens in
bnx2x_vfpf_acquire().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Kconfig options I added to work around broken compilation ended
up screwing up things more, as I used the wrong symbol to control
compilation of the file, resulting in IPv6 fou support to never be built
into the kernel.

Changing CONFIG_NET_FOU_IPV6_TUNNELS to CONFIG_IPV6_FOU fixes that
problem, I had renamed the symbol in one location but not the other,
and as the file is never being used by other kernel code, this did not
lead to a build failure that I would have caught.

After that fix, another issue with the same patch becomes obvious, as we
'select INET6_TUNNEL', which is related to IPV6_TUNNEL, but not the same,
and this can still cause the original build failure when IPV6_TUNNEL is
not built-in but IPV6_FOU is. The fix is equally trivial, we just need
to select the right symbol.

I have successfully build 350 randconfig kernels with this patch
and verified that the driver is now being built.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Valentin Rothberg <valentinrothberg@gmail.com>
Fixes: fabb13db ("fou: add Kconfig options for IPv6 support")
Signed-off-by: David S. Miller <davem@davemloft.net>

In the case of CHECKSUM_COMPLETE the skb checksum should be updated in
{push,pop}_mpls() as they the type in the ethernet header.

As suggested by Pravin Shelar.

Cc: Pravin Shelar <pshelar@nicira.com>
Fixes: 25cd9ba0 ("openvswitch: Add basic MPLS support to kernel")
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now we cannot distinguish that one sk is a udp or sctp style when
we use ss to dump sctp_info. it's necessary to dump it as well.

For sctp_diag, ss support is not officially available, thus there
are no official users of this yet, so we can add this field in the
middle of sctp_info without breaking user API.

v1->v2:
  - move 'sctpi_s_type' field to the end of struct sctp_info, so
    that it won't cause incompatibility with applications already
    built.
  - add __reserved3 in sctp_info to make sure sctp_info is 8-byte
    alignment.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If dirty_tx isn't updated, then dma_unmap_single
can be called twice.

This fixes a
[   58.420980] ------------[ cut here ]------------
[   58.425667] WARNING: CPU: 0 PID: 377 at /home/schurig/d/mkarm/linux-4.5/lib/dma-debug.c:1096 check_unmap+0x9d0/0xab8()
[   58.436405] fec 2188000.ethernet: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=66 bytes]

encountered by Holger
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Tested-by: <holgerschurig@gmail.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The MAC address of the physical interface is only copied to the VLAN
when it is first created, resulting in an inconsistency after MAC
address changes of only newly created VLANs having an up-to-date MAC.

The VLANs should continue inheriting the MAC address of the physical
interface until the VLAN MAC address is explicitly set to any value.
This allows IPv6 EUI64 addresses for the VLAN to reflect any changes
to the MAC of the physical interface and thus for DAD to behave as
expected.
Signed-off-by: Mike Manning <mmanning@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The iadev->rx_open[] array holds "iadev->num_vc" pointers (this code
assumes that pointers are 32 bits).  So the > here should be >= or else
we could end up reading a garbage pointer from one element beyond the
end of the array.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This bug was there when the driver was first added in back in year 2000.
It causes a Smatch warning:

    drivers/atm/firestream.c:849 process_incoming()
    error: buffer overflow 'res_strings' 60 <= 63

There are supposed to be 64 entries in this array and the missing
strings are clearly in the 30 40 range.  I added them as reserved 37 to
reserved 40.  It's possible that strings are really supposed to be added
in the middle instead of at the end, but this approach is safe, in that
it fixes the bug and doesn't break anything that wasn't already broken.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When create a new vxlan link, example:
  ip link add vtap mtu 1440 type vxlan vni 1 dev eth0

The argument "mtu" has no effect, because it is not set to conf->mtu. The
default value is used in vxlan_dev_configure function.

This problem was introduced by commit 0dfbdf41 (vxlan: Factor out device
configuration).

Fixes: 0dfbdf41 (vxlan: Factor out device configuration)
Signed-off-by: Chen Haiquan <oc@yunify.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If CONFIG_DEBUG_OBJECTS_TIMERS=y, hrtimer_init_on_stack() requires
a matching call to destroy_hrtimer_on_stack() to clean up timer
debug objects.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

hrtimer_init_on_stack() needs a matching call to
destroy_hrtimer_on_stack(), so both need to be exported.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace explicit computation of vma page count by a call to
vma_pages().
Also, include <linux/mm.h>
Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>

The members child_list and active_list were added to the fence struct
without descriptions for the Documentation. Adding these.

Fixes: b55b54b5 ("staging/android: remove struct sync_pt")
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>

Split out dma-buf related parts into their own section, add missing
files, and write a bit of overview about how it all fits together.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>

Pull s390 fixes from Martin Schwidefsky:
 "Three bugs fixes and an update for the default configuration"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: fix info leak in do_sigsegv
  s390/config: update default configuration
  s390/bpf: fix recache skb->data/hlen for skb_vlan_push/pop
  s390/bpf: reduce maximum program size to 64 KB

Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>

Apparently nobody noticed that dma-buf.h wasn't actually pulled into
docbook build.  And as a result the headerdoc comments bitrot a bit.
Add missing params/fields.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>

Pull GPIO fixes from Linus Walleij:
 "A bunch of GPIO fixes for the v4.7 series:

   - Drop the lock before reading out the GPIO direction setting in
     drivers supporting the .get_direction() callback: some of them may
     be slowpath.

   - Flush GPIO direction setting before locking a GPIO as an IRQ: some
     electronics or other poking around in the registers behind our back
     may have happened, so flush the direction status before trying to
     lock the line for use by IRQs.

   - Bail out silently when asked to perform operations on NULL GPIO
     descriptors.  That is what all the get_*_optional() is about: we
     get optional GPIO handles, if they are not there, we get NULL.

   - Handle compatible ioctl() correctly: we need to convert the ioctl()
     pointer using compat_ptr() here like everyone else.

   - Disable the broken .to_irq() on the LPC32xx platform.  The whole
     irqchip infrastructure was replaced in the last merge window, and a
     new implementation will be needed"

* tag 'gpio-v4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: drop lock before reading GPIO direction
  gpio: bail out silently on NULL descriptors
  gpio: handle compatible ioctl() pointers
  gpio: flush direction status in gpiochip_lock_as_irq()
  gpio: lpc32xx: disable broken to_irq support

The GICv3 backend of the vgic is quite barrier heavy, in order
to ensure synchronization of the system registers and the
memory mapped view for a potential GICv2 guest.

But when the guest is using a GICv3 model, there is absolutely
no need to execute all these heavy barriers, and it is actually
beneficial to avoid them altogether.

This patch makes the synchonization conditional, and ensures
that we do not change the EL1 SRE settings if we do not need to.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

Both our GIC emulations are "strict", in the sense that we either
emulate a GICv2 or a GICv3, and not a GICv3 with GICv2 legacy
support.

But when running on a GICv3 host, we still allow the guest to
tinker with the ICC_SRE_EL1 register during its time slice:
it can switch SRE off, observe that it is off, and yet on the
next world switch, find the SRE bit to be set again. Not very
nice.

An obvious solution is to always trap accesses to ICC_SRE_EL1
(by clearing ICC_SRE_EL2.Enable), and to let the handler return
the programmed value on a read, or ignore the write.

That way, the guest can always observe that our GICv3 is SRE==1
only.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

When we trap ICC_SRE_EL1, we handle it as RAZ/WI. It would be
more correct to actual make it RO, and return the configured
value when read.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>