Linux 5.13-rc3

We currently only hangle rt711->regmap in rt711_sdca_io_init(), and
rt711->mbq_regmap is missing.

Fixes: 7ad4d237 ('ASoC: rt711-sdca: Add RT711 SDCA vendor-specific driver')
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210607222239.582139-16-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

SDW_SDCA_CTL() registers are used but are not set to readable.

Fixes: 7ad4d237 ('ASoC: rt711-sdca: Add RT711 SDCA vendor-specific driver')
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210607222239.582139-15-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

RT5682_DEVICE_ID is a volatile register, we can not read it in cache
only mode.

Fixes: 03f6fc6d ("ASoC: rt5682: Add the soundwire support")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210607222239.582139-14-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The device checking error should be a jump to pm_runtime_put_autosuspend()
as done before returning value.

Fixes: 867f8d18 ('ASoC: rt5682: fix getting the wrong device id when the suspend_stress_test')
Reviewed-by: Bard Liao <bard.liao@intel.com>
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210607222239.582139-13-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Fix clock stop prepare timeout issue (#2853).
The trigger of internal circuit which belong to
“SDCA preset stuffs” was not set correctly in previous driver,
which could block clock_stop_preparation state.
Add the correct register setting to fix it.

Fixes: 20d17057 ('ASoC: rt715-sdca: Add RT715 sdca vendor-specific driver')
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210607222239.582139-12-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The intent of the status check on resume was to verify if a SoundWire
peripheral reported ATTACHED before waiting for the initialization to
complete. This is required to avoid timeouts that will happen with
'ghost' devices that are exposed in the platform firmware but are not
populated in hardware.

Unfortunately we used 'hw_init' instead of 'first_hw_init'. Due to
another error, the resume operation never timed out, but the volume
settings were not properly restored.

BugLink: https://github.com/thesofproject/linux/issues/2908
BugLink: https://github.com/thesofproject/linux/issues/2637
Fixes: d1ede064 ('ASoC: rt715: add RT715 codec driver')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20210607222239.582139-11-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The intent of the status check on resume was to verify if a SoundWire
peripheral reported ATTACHED before waiting for the initialization to
complete. This is required to avoid timeouts that will happen with
'ghost' devices that are exposed in the platform firmware but are not
populated in hardware.

Unfortunately we used 'hw_init' instead of 'first_hw_init'. Due to
another error, the resume operation never timed out, but the volume
settings were not properly restored.

This patch renames the status flag to 'first_hw_init' for consistency
with other drivers (was 'first_init')

BugLink: https://github.com/thesofproject/linux/issues/2908
BugLink: https://github.com/thesofproject/linux/issues/2637
Fixes: 20d17057 ('ASoC: rt715-sdca: Add RT715 sdca vendor-specific driver')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20210607222239.582139-10-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The intent of the status check on resume was to verify if a SoundWire
peripheral reported ATTACHED before waiting for the initialization to
complete. This is required to avoid timeouts that will happen with
'ghost' devices that are exposed in the platform firmware but are not
populated in hardware.

Unfortunately we used 'hw_init' instead of 'first_hw_init'. Due to
another error, the resume operation never timed out, but the volume
settings were not properly restored.

BugLink: https://github.com/thesofproject/linux/issues/2908
BugLink: https://github.com/thesofproject/linux/issues/2637
Fixes: 320b8b0d ('ASoC: rt711: add rt711 codec driver')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20210607222239.582139-9-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The intent of the status check on resume was to verify if a SoundWire
peripheral reported ATTACHED before waiting for the initialization to
complete. This is required to avoid timeouts that will happen with
'ghost' devices that are exposed in the platform firmware but are not
populated in hardware.

Unfortunately we used 'hw_init' instead of 'first_hw_init'. Due to
another error, the resume operation never timed out, but the volume
settings were not properly restored.

BugLink: https://github.com/thesofproject/linux/issues/2908
BugLink: https://github.com/thesofproject/linux/issues/2637
Fixes: 7ad4d237 ('ASoC: rt711-sdca: Add RT711 SDCA vendor-specific driver')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20210607222239.582139-8-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The intent of the status check on resume was to verify if a SoundWire
peripheral reported ATTACHED before waiting for the initialization to
complete. This is required to avoid timeouts that will happen with
'ghost' devices that are exposed in the platform firmware but are not
populated in hardware.

Unfortunately we used 'hw_init' instead of 'first_hw_init'. Due to
another error, the resume operation never timed out, but the volume
settings were not properly restored.

BugLink: https://github.com/thesofproject/linux/issues/2908
BugLink: https://github.com/thesofproject/linux/issues/2637
Fixes: 7d2a5f9a ('ASoC: rt700: add rt700 codec driver')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20210607222239.582139-7-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The intent of the status check on resume was to verify if a SoundWire
peripheral reported ATTACHED before waiting for the initialization to
complete. This is required to avoid timeouts that will happen with
'ghost' devices that are exposed in the platform firmware but are not
populated in hardware.

Unfortunately we used 'hw_init' instead of 'first_hw_init'. Due to
another error, the resume operation never timed out, but the volume
settings were not properly restored.

BugLink: https://github.com/thesofproject/linux/issues/2908
BugLink: https://github.com/thesofproject/linux/issues/2637
Fixes: 03f6fc6d ('ASoC: rt5682: Add the soundwire support')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20210607222239.582139-6-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The intent of the status check on resume was to verify if a SoundWire
peripheral reported ATTACHED before waiting for the initialization to
complete. This is required to avoid timeouts that will happen with
'ghost' devices that are exposed in the platform firmware but are not
populated in hardware.

Unfortunately we used 'hw_init' instead of 'first_hw_init'. Due to
another error, the resume operation never timed out, but the volume
settings were not properly restored.

BugLink: https://github.com/thesofproject/linux/issues/2908
BugLink: https://github.com/thesofproject/linux/issues/2637
Fixes: 2b719fd2 ('ASoC: rt1316: Add RT1316 SDCA vendor-specific driver')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20210607222239.582139-5-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The intent of the status check on resume was to verify if a SoundWire
peripheral reported ATTACHED before waiting for the initialization to
complete. This is required to avoid timeouts that will happen with
'ghost' devices that are exposed in the platform firmware but are not
populated in hardware.

Unfortunately we used 'hw_init' instead of 'first_hw_init'. Due to
another error, the resume operation never timed out, but the volume
settings were not properly restored.

BugLink: https://github.com/thesofproject/linux/issues/2908
BugLink: https://github.com/thesofproject/linux/issues/2637
Fixes: a87a6653 ('ASoC: rt1308-sdw: add rt1308 SdW amplifier driver')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20210607222239.582139-4-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The intent of the status check on resume was to verify if a SoundWire
peripheral reported ATTACHED before waiting for the initialization to
complete. This is required to avoid timeouts that will happen with
'ghost' devices that are exposed in the platform firmware but are not
populated in hardware.

Unfortunately we used 'hw_init' instead of 'first_hw_init'. Due to
another error, the resume operation never timed out, but the volume
settings were not properly restored.

This patch renames the status flag to 'first_hw_init' for consistency
with other drivers.

BugLink: https://github.com/thesofproject/linux/issues/2637
Fixes: 56a5b791 ('ASoC: codecs: max98373: add SoundWire support')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20210607222239.582139-3-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

We forgot to test that devm_kcalloc doesn't return NULL.

Fixes: 349dd239 ('ASoC: max98373: don't access volatile registers in bias level off')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20210607222239.582139-2-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch fixes PoP noise of around 15ms observed during audio
capture begin.
Enables BCLK and LRCLK in snd_soc_dai_ops prepare call for
introducing some delay before capture start.

(am from https://patchwork.kernel.org/patch/12276369/)
(also found at https://lore.kernel.org/r/20210524142114.18676-1-srivasam@codeaurora.org)
Co-developed-by: Judy Hsiao <judyhsiao@chromium.org>
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210604154545.1198337-1-judyhsiao@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Based on ("5a15cd7f"), the setting also
should be set in soundwire mode.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/20210604063150.29925-1-oder_chiou@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

TAS2562_TDM_CFG0_SAMPRATE_MASK starts at bit 1, not 0.
So all values need to be left shifted by 1.
Signed-off-by: Richard Weinberger <richard@nod.at>
Link: https://lore.kernel.org/r/20210530203446.19022-1-richard@nod.atSigned-off-by: Mark Brown <broonie@kernel.org>

There is a fair amount of warnings when running 'make dtbs_check' with
amlogic,gx-sound-card.yaml.

Ex:
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dt.yaml: sound: dai-link-0:sound-dai:0:1: missing phandle tag in 0
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dt.yaml: sound: dai-link-0:sound-dai:0:2: missing phandle tag in 0
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dt.yaml: sound: dai-link-0:sound-dai:0: [66, 0, 0] is too long

The reason is that the sound-dai phandle provided has cells, and in such
case the schema should use 'phandle-array' instead of 'phandle'.

Fixes: fd00366b ("ASoC: meson: gx: add sound card dt-binding documentation")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210524093448.357140-1-jbrunet@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>

Unfortunately the previous patch to fix issues using the AMD ACP bridge
has the side effect of breaking the dmic in other cases and needs to be
reverted.

Removing the changes while we revisit the fix and find something better.
Apologies for the churn.
Suggested-by: Gabriel Craciunescu <unix.or.die@gmail.com>
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20210602171251.3243-1-markpearson@lenovo.comSigned-off-by: Mark Brown <broonie@kernel.org>

More laptops identified where the AMD ACP bridge needs to be blocked
or the microphone will not work when connected to HDMI.

Use DMI to block the microphone PCM device for these platforms.
Suggested-by: Gabriel Craciunescu <nix.or.die@gmail.com>
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20210531145502.6079-1-markpearson@lenovo.comSigned-off-by: Mark Brown <broonie@kernel.org>

The recent changes to use common code to power up/down DSP cores also
removed the reset of the core state at suspend. It turns out this is
still needed. When the firmware state is reset to
SOF_FW_BOOT_NOT_STARTED, also enabled_cores should be reset, and
existing DSP drivers depend on this.

BugLink: https://github.com/thesofproject/linux/issues/2824
Fixes: 42077f08 ("ASoC: SOF: update dsp core power status in common APIs")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210528144330.2551-1-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Otherwise, when compiled as module, a WARN_ON is triggered:

WARNING: CPU: 0 PID: 5 at sound/core/init.c:208 snd_card_new+0x310/0x39c [snd]
[...]
CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.10.39 #1
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
Workqueue: events deferred_probe_work_func
[<c0111988>] (unwind_backtrace) from [<c010c8ac>] (show_stack+0x10/0x14)
[<c010c8ac>] (show_stack) from [<c092784c>] (dump_stack+0xdc/0x104)
[<c092784c>] (dump_stack) from [<c0129710>] (__warn+0xd8/0x114)
[<c0129710>] (__warn) from [<c0922a48>] (warn_slowpath_fmt+0x5c/0xc4)
[<c0922a48>] (warn_slowpath_fmt) from [<bf0496f8>] (snd_card_new+0x310/0x39c [snd])
[<bf0496f8>] (snd_card_new [snd]) from [<bf1d7df8>] (snd_soc_bind_card+0x334/0x9c4 [snd_soc_core])
[<bf1d7df8>] (snd_soc_bind_card [snd_soc_core]) from [<bf1e9cd8>] (devm_snd_soc_register_card+0x30/0x6c [snd_soc_core])
[<bf1e9cd8>] (devm_snd_soc_register_card [snd_soc_core]) from [<bf22d964>] (fsl_asoc_card_probe+0x550/0xcc8 [snd_soc_fsl_asoc_card])
[<bf22d964>] (fsl_asoc_card_probe [snd_soc_fsl_asoc_card]) from [<c060c930>] (platform_drv_probe+0x48/0x98)
[...]
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20210527163409.22049-1-nicolas.cavallari@green-communications.frSigned-off-by: Mark Brown <broonie@kernel.org>

There are spelling mistakes in comments. Fix them.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210601103506.9477-1-colin.king@canonical.comSigned-off-by: Mark Brown <broonie@kernel.org>

The power of "LDO2", "MICBIAS1" and "Mic Det Power" were powered off after
the DAPM widgets were added, and these powers were set by the JD settings
"RT5659_JD_HDA_HEADER" in the probe function. In the codec probe function,
these powers were ignored to prevent them controlled by DAPM.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Message-Id: <15fced51977b458798ca4eebf03dafb9@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Check the return value of devm_kstrdup() in case of
Null-point-dereference.

Fixes: 45dd9943 ("ASoC: core: remove artificial component and DAI name constraint")
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Link: https://lore.kernel.org/r/20210524024941.159952-1-wangkefeng.wang@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Pull perf fixes from Thomas Gleixner:
 "Two perf fixes:

   - Do not check the LBR_TOS MSR when setting up unrelated LBR MSRs as
     this can cause malfunction when TOS is not supported

   - Allocate the LBR XSAVE buffers along with the DS buffers upfront
     because allocating them when adding an event can deadlock"

* tag 'perf-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/lbr: Remove cpuc->lbr_xsave allocation from atomic context
  perf/x86: Avoid touching LBR_TOS MSR for Arch LBR

Pull locking fixes from Thomas Gleixner:
 "Two locking fixes:

   - Invoke the lockdep tracepoints in the correct place so the ordering
     is correct again

   - Don't leave the mutex WAITER bit stale when the last waiter is
     dropping out early due to a signal as that forces all subsequent
     lock operations needlessly into the slowpath until it's cleaned up
     again"

* tag 'locking-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/mutex: clear MUTEX_FLAGS if wait_list is empty due to signal
  locking/lockdep: Correct calling tracepoints

Pull irq fixes from Thomas Gleixner:
 "A few fixes for irqchip drivers:

   - Allocate interrupt descriptors correctly on Mainstone PXA when
     SPARSE_IRQ is enabled; otherwise the interrupt association fails

   - Make the APPLE AIC chip driver depend on APPLE

   - Remove redundant error output on devm_ioremap_resource() failure"

* tag 'irq-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip: Remove redundant error printing
  irqchip/apple-aic: APPLE_AIC should depend on ARCH_APPLE
  ARM: PXA: Fix cplds irqdesc allocation when using legacy mode

Pull x86 fixes from Borislav Petkov:

 - Fix how SEV handles MMIO accesses by forwarding potential page faults
   instead of killing the machine and by using the accessors with the
   exact functionality needed when accessing memory.

 - Fix a confusion with Clang LTO compiler switches passed to the it

 - Handle the case gracefully when VMGEXIT has been executed in
   userspace

* tag 'x86_urgent_for_v5.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sev-es: Use __put_user()/__get_user() for data accesses
  x86/sev-es: Forward page-faults which happen during emulation
  x86/sev-es: Don't return NULL from sev_es_get_ghcb()
  x86/build: Fix location of '-plugin-opt=' flags
  x86/sev-es: Invalidate the GHCB after completing VMGEXIT
  x86/sev-es: Move sev_es_put_ghcb() in prep for follow on patch

Pull powerpc fixes from Michael Ellerman:

 - Fix breakage of strace (and other ptracers etc.) when using the new
   scv ABI (Power9 or later with glibc >= 2.33).

 - Fix early_ioremap() on 64-bit, which broke booting on some machines.

Thanks to Dmitry V. Levin, Nicholas Piggin, Alexey Kardashevskiy, and
Christophe Leroy.

* tag 'powerpc-5.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s/syscall: Fix ptrace syscall info with scv syscalls
  powerpc/64s/syscall: Use pt_regs.trap to distinguish syscall ABI difference between sc and scv syscalls
  powerpc: Fix early setup to make early_ioremap() work

Merge tag 'kbuild-fixes-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix short log indentation for tools builds

 - Fix dummy-tools to adjust to the latest stackprotector check

* tag 'kbuild-fixes-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: dummy-tools: adjust to stricter stackprotector check
  scripts/jobserver-exec: Fix a typo ("envirnoment")
  tools build: Fix quiet cmd indentation

Merge misc fixes from Andrew Morton:
 "10 patches.

  Subsystems affected by this patch series: mm (pagealloc, gup, kasan,
  and userfaultfd), ipc, selftests, watchdog, bitmap, procfs, and lib"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  userfaultfd: hugetlbfs: fix new flag usage in error path
  lib: kunit: suppress a compilation warning of frame size
  proc: remove Alexey from MAINTAINERS
  linux/bits.h: fix compilation error with GENMASK
  watchdog: reliable handling of timestamps
  kasan: slab: always reset the tag in get_freepointer_safe()
  tools/testing/selftests/exec: fix link error
  ipc/mqueue, msg, sem: avoid relying on a stack reference past its expiry
  Revert "mm/gup: check page posion status for coredump."
  mm/shuffle: fix section mismatch warning

In commit d6995da3 ("hugetlb: use page.private for hugetlb specific
page flags") the use of PagePrivate to indicate a reservation count
should be restored at free time was changed to the hugetlb specific flag
HPageRestoreReserve.  Changes to a userfaultfd error path as well as a
VM_BUG_ON() in remove_inode_hugepages() were overlooked.

Users could see incorrect hugetlb reserve counts if they experience an
error with a UFFDIO_COPY operation.  Specifically, this would be the
result of an unlikely copy_huge_page_from_user error.  There is not an
increased chance of hitting the VM_BUG_ON.

Link: https://lkml.kernel.org/r/20210521233952.236434-1-mike.kravetz@oracle.com
Fixes: d6995da3 ("hugetlb: use page.private for hugetlb specific page flags")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mina Almasry <almasry.mina@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/bitfield_kunit.c: In function `test_bitfields_constants':
lib/bitfield_kunit.c:93:1: warning: the frame size of 7456 bytes is larger than 2048 bytes [-Wframe-larger-than=]
 }
 ^

As the description of BITFIELD_KUNIT in lib/Kconfig.debug, it "Only useful
for kernel devs running the KUnit test harness, and not intended for
inclusion into a production build".  Therefore, it is not worth modifying
variable 'test_bitfields_constants' to clear this warning.  Just suppress
it.

Link: https://lkml.kernel.org/r/20210518094533.7652-1-thunder.leizhen@huawei.comSigned-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Vitor Massaru Iha <vitor@massaru.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

People Cc me and I don't have time.

Link: https://lkml.kernel.org/r/YKarMxHJBIhMHQIh@localhost.localdomainSigned-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

GENMASK() has an input check which uses __builtin_choose_expr() to
enable a compile time sanity check of its inputs if they are known at
compile time.

However, it turns out that __builtin_constant_p() does not always return
a compile time constant [0].  It was thought this problem was fixed with
gcc 4.9 [1], but apparently this is not the case [2].

Switch to use __is_constexpr() instead which always returns a compile time
constant, regardless of its inputs.

Link: https://lore.kernel.org/lkml/42b4342b-aefc-a16a-0d43-9f9c0d63ba7a@rasmusvillemoes.dk [0]
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=19449 [1]
Link: https://lore.kernel.org/lkml/1ac7bbc2-45d9-26ed-0b33-bf382b8d858b@I-love.SAKURA.ne.jp [2]
Link: https://lkml.kernel.org/r/20210511203716.117010-1-rikard.falkeborn@gmail.comSigned-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 9bf3bc94 ("watchdog: cleanup handling of false positives")
tried to handle a virtual host stopped by the host a more
straightforward and cleaner way.

But it introduced a risk of false softlockup reports.  The virtual host
might be stopped at any time, for example between
kvm_check_and_clear_guest_paused() and is_softlockup().  As a result,
is_softlockup() might read the updated jiffies and detects a softlockup.

A solution might be to put back kvm_check_and_clear_guest_paused() after
is_softlockup() and detect it.  But it would put back the cycle that
complicates the logic.

In fact, the handling of all the timestamps is not reliable.  The code
does not guarantee when and how many times the timestamps are read.  For
example, "period_ts" might be touched anytime also from NMI and re-read in
is_softlockup().  It works just by chance.

Fix all the problems by making the code even more explicit.

1. Make sure that "now" and "period_ts" timestamps are read only once.
   They might be changed at anytime by NMI or when the virtual guest is
   stopped by the host.  Note that "now" timestamp does this implicitly
   because "jiffies" is marked volatile.

2. "now" time must be read first.  The state of "period_ts" will
   decide whether it will be used or the period will get restarted.

3. kvm_check_and_clear_guest_paused() must be called before reading
   "period_ts".  It touches the variable when the guest was stopped.

As a result, "now" timestamp is used only when the watchdog was not
touched and the guest not stopped in the meantime.  "period_ts" is
restarted in all other situations.

Link: https://lkml.kernel.org/r/YKT55gw+RZfyoFf7@alley
Fixes: 9bf3bc94 ("watchdog: cleanup handling of false positives")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reported-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>