Include asm/div64.h for do_div() usage in DIV_ROUND_DOWN_ULL() and
DIV_ROUND_CLOSEST_ULL().  Remove the old CONFIG_LBDAF=y conditional
include.

Link: http://lkml.kernel.org/r/20181228153430.23763-1-jani.nikula@intel.comSigned-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull USB/PHY updates from Greg KH:
 "Here is the big USB/PHY driver pull request for 5.1-rc1.

  The usual set of gadget driver updates, phy driver updates, xhci
  updates, and typec additions. Also included in here are a lot of small
  cleanups and fixes and driver updates where needed.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits)
  wusb: Remove unnecessary static function ckhdid_printf
  usb: core: make default autosuspend delay configurable
  usb: core: Fix typo in description of "authorized_default"
  usb: chipidea: Refactor USB PHY selection and keep a single PHY
  usb: chipidea: Grab the (legacy) USB PHY by phandle first
  usb: chipidea: imx: set power polarity
  dt-bindings: usb: ci-hdrc-usb2: add property power-active-high
  usb: chipidea: imx: remove unused header files
  usb: chipidea: tegra: Fix missed ci_hdrc_remove_device()
  usb: core: add option of only authorizing internal devices
  usb: typec: tps6598x: handle block writes separately with plain-I2C adapters
  usb: xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI
  usb: xhci: fix build warning - missing prototype
  usb: xhci: dbc: Fixing typo error.
  usb: xhci: remove unused member 'parent' in xhci_regset struct
  xhci: tegra: Prevent error pointer dereference
  USB: serial: option: add Telit ME910 ECM composition
  usb: core: Replace hardcoded check with inline function from usb.h
  usb: core: skip interfaces disabled in devicetree
  usb: typec: mux: remove redundant check on variable match
  ...

Pull tty/serial updates from Greg KH:
 "Here is the "big" patchset for the tty/serial driver layer for
  5.1-rc1.

  It's really not all that big, nothing major here.

  There are a lot of tiny driver fixes and updates, combined with other
  cleanups for different serial drivers and the vt layer. Full details
  are in the shortlog.

  All of these have been in linux-next with no reported issues"

* tag 'tty-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (70 commits)
  tty: xilinx_uartps: Correct return value in probe
  serial: sprd: Modify the baud rate calculation formula
  dt-bindings: serial: Add Milbeaut serial driver description
  serial: 8250_of: assume reg-shift of 2 for mrvl,mmp-uart
  serial: 8250_pxa: honor the port number from devicetree
  tty: hvc_xen: Mark expected switch fall-through
  tty: n_gsm: Mark expected switch fall-throughs
  tty: serial: msm_serial: Remove __init from msm_console_setup()
  tty: serial: samsung: Enable baud clock during initialisation
  serial: uartps: Fix stuck ISR if RX disabled with non-empty FIFO
  tty: serial: remove redundant likely annotation
  tty/n_hdlc: mark expected switch fall-through
  serial: 8250_pci: Have ACCES cards that use the four port Pericom PI7C9X7954 chip use the pci_pericom_setup()
  serial: 8250_pci: Fix number of ports for ACCES serial cards
  vt: perform safe console erase in the right order
  tty/nozomi: use pci_iomap instead of ioremap_nocache
  tty/synclink: remove ISA support
  serial: 8250_pci: Replace custom code with pci_match_id()
  serial: max310x: Correction of the initial setting of the MODE1 bits for various supported ICs.
  serial: mps2-uart: Add parentheses around conditional in mps2_uart_shutdown
  ...

Pull staging/IIO updates from Greg KH:
 "Here is the big staging/iio driver pull request for 5.1-rc1.

  Lots of good IIO driver updates and cleanups in here as always.
  Combined with the removal of the xgifb driver, we have a net "loss" of
  over 9000 lines in the pull request, always a nice thing.

  As the outreachy application process is currently happening, there are
  loads of tiny checkpatch cleanup fixes all over the staging tree,
  which accounts for the majority of the fixups"

* tag 'staging-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (341 commits)
  staging: mt7621-dma: remove license boilerplate text
  staging: mt7621-dma: add SPDX GPL-2.0+ license identifier
  Staging: ks7010: Replace typecast to int
  Staging: vt6655: Align a static function declaration
  staging: speakup: fix line over 80 characters.
  staging: mt7621-eth: Remove license boilerplate text
  staging: mt7621-eth: Add SPDX license identifier
  staging: ks7010: removed custom Michael MIC implementation.
  staging: rtl8192e: Fix space and suspect issue
  Staging: vt6655: Modify comment style of SPDX License Identifier
  Staging: vt6655: Modify comment style for SPDX-License-Identifier
  Staging: vt6655: Align a function declaration
  Staging: vt6655: Alignment of function declaration
  staging: rtl8712: Fix indentation issue
  staging: wilc1000: fix incorrent type in initializer
  staging: rtl8188eu: remove unused P2P_PRIVATE_IOCTL_SET_LEN
  staging: rtl8188eu: remove unused enum P2P_PROTO_WK_ID
  staging: rtl8723bs: Remove duplicated include from drv_types.h
  Staging: vt6655: Alignment should match open parenthesis
  staging: erofs: fix mis-acted TAIL merging behavior
  ...

The pm8xxx_get_channel() implementation is unclear, and causes gcc to
suddenly generate odd warnings.  The trigger for the warning (at least
for me) was the entirely unrelated commit 79a4e91d ("device.h: Add
__cold to dev_<level> logging functions"), which apparently changes gcc
code generation in the caller function enough to cause this:

  drivers/iio/adc/qcom-pm8xxx-xoadc.c: In function ‘pm8xxx_xoadc_probe’:
  drivers/iio/adc/qcom-pm8xxx-xoadc.c:633:8: warning: ‘ch’ may be used uninitialized in this function [-Wmaybe-uninitialized]
    ret = pm8xxx_read_channel_rsv(adc, ch, AMUX_RSV4,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
             &read_nomux_rsv4, true);
             ~~~~~~~~~~~~~~~~~~~~~~~
  drivers/iio/adc/qcom-pm8xxx-xoadc.c:426:27: note: ‘ch’ was declared here
    struct pm8xxx_chan_info *ch;
                             ^~

because gcc for some reason then isn't able to see that the termination
condition for the "for( )" loop in that function is also the condition
for returning NULL.

So it's not _actually_ uninitialized, but the function is admittedly
just unnecessarily oddly written.

Simplify and clarify the function, making gcc also see that it always
returns a valid initialized value.

Cc: Joe Perches <joe@perches.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Andy Gross <andy.gross@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull driver core updates from Greg KH:
 "Here is the big driver core patchset for 5.1-rc1

  More patches than "normal" here this merge window, due to some work in
  the driver core by Alexander Duyck to rework the async probe
  functionality to work better for a number of devices, and independant
  work from Rafael for the device link functionality to make it work
  "correctly".

  Also in here is:

   - lots of BUS_ATTR() removals, the macro is about to go away

   - firmware test fixups

   - ihex fixups and simplification

   - component additions (also includes i915 patches)

   - lots of minor coding style fixups and cleanups.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (65 commits)
  driver core: platform: remove misleading err_alloc label
  platform: set of_node in platform_device_register_full()
  firmware: hardcode the debug message for -ENOENT
  driver core: Add missing description of new struct device_link field
  driver core: Fix PM-runtime for links added during consumer probe
  drivers/component: kerneldoc polish
  async: Add cmdline option to specify drivers to be async probed
  driver core: Fix possible supplier PM-usage counter imbalance
  PM-runtime: Fix __pm_runtime_set_status() race with runtime resume
  driver: platform: Support parsing GpioInt 0 in platform_get_irq()
  selftests: firmware: fix verify_reqs() return value
  Revert "selftests: firmware: remove use of non-standard diff -Z option"
  Revert "selftests: firmware: add CONFIG_FW_LOADER_USER_HELPER_FALLBACK to config"
  device: Fix comment for driver_data in struct device
  kernfs: Allocating memory for kernfs_iattrs with kmem_cache.
  sysfs: remove unused include of kernfs-internal.h
  driver core: Postpone DMA tear-down until after devres release
  driver core: Document limitation related to DL_FLAG_RPM_ACTIVE
  PM-runtime: Take suppliers into account in __pm_runtime_set_status()
  device.h: Add __cold to dev_<level> logging functions
  ...

Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc driver patch pull request for 5.1-rc1.

  The largest thing by far is the new habanalabs driver for their AI
  accelerator chip. For now it is in the drivers/misc directory but will
  probably move to a new directory soon along with other drivers of this
  type.

  Other than that, just the usual set of individual driver updates and
  fixes. There's an "odd" merge in here from the DRM tree that they
  asked me to do as the MEI driver is starting to interact with the i915
  driver, and it needed some coordination. All of those patches have
  been properly acked by the relevant subsystem maintainers.

  All of these have been in linux-next with no reported issues, most for
  quite some time"

* tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (219 commits)
  habanalabs: adjust Kconfig to fix build errors
  habanalabs: use %px instead of %p in error print
  habanalabs: use do_div for 64-bit divisions
  intel_th: gth: Fix an off-by-one in output unassigning
  habanalabs: fix little-endian<->cpu conversion warnings
  habanalabs: use NULL to initialize array of pointers
  habanalabs: fix little-endian<->cpu conversion warnings
  habanalabs: soft-reset device if context-switch fails
  habanalabs: print pointer using %p
  habanalabs: fix memory leak with CBs with unaligned size
  habanalabs: return correct error code on MMU mapping failure
  habanalabs: add comments in uapi/misc/habanalabs.h
  habanalabs: extend QMAN0 job timeout
  habanalabs: set DMA0 completion to SOB 1007
  habanalabs: fix validation of WREG32 to DMA completion
  habanalabs: fix mmu cache registers init
  habanalabs: disable CPU access on timeouts
  habanalabs: add MMU DRAM default page mapping
  habanalabs: Dissociate RAZWI info from event types
  misc/habanalabs: adjust Kconfig to fix build errors
  ...

Pull sound updates from Takashi Iwai:
 "We had again a busy development cycle with many new drivers as well as
  lots of core improvements / cleanups. Let's go for highlights:

  ALSA core:

   - PCM locking scheme was refactored for reducing a global rwlock

   - PCM suspend is handled in the device type PM ops now; lots of
     explicit calls were reduced by this action

   - Cleanups about PCM buffer preallocation calls

   - Kill NULL device object in memory allocations

   - Lots of procfs API cleanups

  ASoC core:

   - Support for only powering up channels that are actively being used

   - Cleanups / fixes of topology API

  ASoC drivers:

   - MediaTek BTCVSD for a Bluetooth radio chip, which is the first such
     driver we've had upstream!

   - Quite a few improvements to simplify the generic card drivers,
     especially the merge of the SCU cards into the main generic drivers

   - Lots of fixes for probing on Intel systems to follow more standard
     styles

   - A big refresh and cleanup of the Samsung drivers

   - New drivers: Asahi Kasei Microdevices AK4497, Cirrus Logic CS4341
     and CS35L26, Google ChromeOS embedded controllers, Ingenic JZ4725B,
     MediaTek BTCVSD, MT8183 and MT6358, NXP MICFIL, Rockchip RK3328,
     Spreadtrum DMA controllers, Qualcomm WCD9335, Xilinx S/PDIF and PCM
     formatters

  ALSA drivers:

   - Improvements of Tegra HD-audio controller driver for supporting new
     chips

   - HD-audio codec quirks for ALC294 S4 resume, ASUS laptop, Chrome
     headset button support and Dell workstations

   - Improved DSD support on USB-audio

   - Quirk for MOTU MicroBook II USB-audio

   - Support for Fireface UCX support and Solid State Logic Duende
     Classic/Mini"

* tag 'sound-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (461 commits)
  ALSA: usb-audio: Add quirk for MOTU MicroBook II
  ASoC: stm32: i2s: skip useless write in slave mode
  ASoC: stm32: i2s: fix race condition in irq handler
  ASoC: stm32: i2s: remove useless callback
  ASoC: stm32: i2s: fix dma configuration
  ASoC: stm32: i2s: fix stream count management
  ASoC: stm32: i2s: fix 16 bit format support
  ASoC: stm32: i2s: fix IRQ clearing
  ASoC: qcom: Kconfig: fix dependency for sdm845
  ASoC: Intel: Boards: Add Maxim98373 support
  ASoC: rsnd: gen: fix SSI9 4/5/6/7 busif related register address
  ALSA: firewire-motu: fix construction of PCM frame for capture direction
  ALSA: bebob: use more identical mod_alias for Saffire Pro 10 I/O against Liquid Saffire 56
  ALSA: hda: Extend i915 component bind timeout
  ASoC: wm_adsp: Improve logging messages
  ASoC: wm_adsp: Add support for multiple compressed buffers
  ASoC: wm_adsp: Refactor compress stream initialisation
  ASoC: wm_adsp: Reorder some functions for improved clarity
  ASoC: wm_adsp: Factor out stripping padding from ADSP data
  ASoC: cs35l36: Fix an IS_ERR() vs NULL checking bug
  ...

Pull device properties framework updates from Rafael Wysocki:
 "Fix the length value used in the PROPERTY_ENTRY_STRING() macro and
  make software nodes use the get_named_child_node() fwnode callback
  (Heikki Krogerus)"

* tag 'devprop-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  software node: Implement get_named_child_node fwnode callback
  device property: Fix the length used in PROPERTY_ENTRY_STRING()

Pull ACPI updates from Rafael Wysocki:
 "These are ACPICA updates including ACPI 6.3 support among other
  things, APEI updates including the ARM Software Delegated Exception
  Interface (SDEI) support, ACPI EC driver fixes and cleanups and other
  assorted improvements.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20190215
     including ACPI 6.3 support and more:
      * New predefined methods: _NBS, _NCH, _NIC, _NIH, and _NIG (Erik
        Schmauss).
      * Update of the PCC Identifier structure in PDTT (Erik Schmauss).
      * Support for new Generic Affinity Structure subtable in SRAT
        (Erik Schmauss).
      * New PCC operation region support (Erik Schmauss).
      * Support for GICC statistical profiling for MADT (Erik Schmauss).
      * New Error Disconnect Recover notification support (Erik
        Schmauss).
      * New PPTT Processor Structure Flags fields support (Erik
        Schmauss).
      * ACPI 6.3 HMAT updates (Erik Schmauss).
      * GTDT Revision 3 support (Erik Schmauss).
      * Legacy module-level code (MLC) support removal (Erik Schmauss).
      * Update/clarification of messages for control method failures
        (Bob Moore).
      * Warning on creation of a zero-length opregion (Bob Moore).
      * acpiexec option to dump extra info for memory leaks (Bob Moore).
      * More ACPI error to firmware error conversions (Bob Moore).
      * Debugger fix (Bob Moore).
      * Copyrights update (Bob Moore)

   - Clean up sleep states support code in ACPICA (Christoph Hellwig)

   - Rework in_nmi() handling in the APEI code and add suppor for the
     ARM Software Delegated Exception Interface (SDEI) to it (James
     Morse)

   - Fix possible out-of-bounds accesses in BERT-related core (Ross
     Lagerwall)

   - Fix the APEI code parsing HEST that includes a Deferred Machine
     Check subtable (Yazen Ghannam)

   - Use DEFINE_DEBUGFS_ATTRIBUTE for APEI-related debugfs files
     (YueHaibing)

   - Switch the APEI ERST code to the new generic UUID API (Andy
     Shevchenko)

   - Update the MAINTAINERS entry for APEI (Borislav Petkov)

   - Fix and clean up the ACPI EC driver (Rafael Wysocki, Zhang Rui)

   - Fix DMI checks handling in the ACPI backlight driver and add the
     "Lunch Box" chassis-type check to it (Hans de Goede)

   - Add support for using ACPI table overrides included in built-in
     initrd images (Shunyong Yang)

   - Update ACPI device enumeration to treat the PWM2 device as "always
     present" on Lenovo Yoga Book (Yauhen Kharuzhy)

   - Fix up the enumeration of device objects with the PRP0001 device ID
     (Andy Shevchenko)

   - Clean up PPTT parsing error messages (John Garry)

   - Clean up debugfs files creation handling (Greg Kroah-Hartman,
     Rafael Wysocki)

   - Clean up the ACPI DPTF Makefile (Masahiro Yamada)"

* tag 'acpi-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
  ACPI / bus: Respect PRP0001 when retrieving device match data
  ACPICA: Update version to 20190215
  ACPI/ACPICA: Trivial: fix spelling mistakes and fix whitespace formatting
  ACPICA: ACPI 6.3: add GTDT Revision 3 support
  ACPICA: ACPI 6.3: HMAT updates
  ACPICA: ACPI 6.3: PPTT add additional fields in Processor Structure Flags
  ACPICA: ACPI 6.3: add Error Disconnect Recover Notification value
  ACPICA: ACPI 6.3: MADT: add support for statistical profiling in GICC
  ACPICA: ACPI 6.3: add PCC operation region support for AML interpreter
  efi: cper: Fix possible out-of-bounds access
  ACPI: APEI: Fix possible out-of-bounds access to BERT region
  ACPICA: ACPI 6.3: SRAT: add Generic Affinity Structure subtable
  ACPICA: ACPI 6.3: Add Trigger order to PCC Identifier structure in PDTT
  ACPICA: ACPI 6.3: Adding predefined methods _NBS, _NCH, _NIC, _NIH, and _NIG
  ACPICA: Update/clarify messages for control method failures
  ACPICA: Debugger: Fix possible fault with the "test objects" command
  ACPICA: Interpreter: Emit warning for creation of a zero-length op region
  ACPICA: Remove legacy module-level code support
  ACPI / x86: Make PWM2 device always present at Lenovo Yoga Book
  ACPI / video: Extend chassis-type detection with a "Lunch Box" check
  ..

Pull power management updates from Rafael Wysocki:
 "These are PM-runtime framework changes to use ktime instead of jiffies
  for accounting, new PM core flag to mark devices that don't need any
  form of power management, cpuidle updates including driver API
  documentation and a new governor, cpufreq updates including a new
  driver for Armada 8K, thermal cleanups and more, some energy-aware
  scheduling (EAS) enabling changes, new chips support in the intel_idle
  and RAPL drivers and assorted cleanups in some other places.

  Specifics:

   - Update the PM-runtime framework to use ktime instead of jiffies for
     accounting (Thara Gopinath, Vincent Guittot)

   - Optimize the autosuspend code in the PM-runtime framework somewhat
     (Ladislav Michl)

   - Add a PM core flag to mark devices that don't need any form of
     power management (Sudeep Holla)

   - Introduce driver API documentation for cpuidle and add a new
     cpuidle governor for tickless systems (Rafael Wysocki)

   - Add Jacobsville support to the intel_idle driver (Zhang Rui)

   - Clean up a cpuidle core header file and the cpuidle-dt and ACPI
     processor-idle drivers (Yangtao Li, Joseph Lo, Yazen Ghannam)

   - Add new cpufreq driver for Armada 8K (Gregory Clement)

   - Fix and clean up cpufreq core (Rafael Wysocki, Viresh Kumar, Amit
     Kucheria)

   - Add support for light-weight tear-down and bring-up of CPUs to the
     cpufreq core and use it in the cpufreq-dt driver (Viresh Kumar)

   - Fix cpu_cooling Kconfig dependencies, add support for CPU cooling
     auto-registration to the cpufreq core and use it in multiple
     cpufreq drivers (Amit Kucheria)

   - Fix some minor issues and do some cleanups in the davinci,
     e_powersaver, ap806, s5pv210, qcom and kryo cpufreq drivers
     (Bartosz Golaszewski, Gustavo Silva, Julia Lawall, Paweł Chmiel,
     Taniya Das, Viresh Kumar)

   - Add a Hisilicon CPPC quirk to the cppc_cpufreq driver (Xiongfeng
     Wang)

   - Clean up the intel_pstate and acpi-cpufreq drivers (Erwan Velu,
     Rafael Wysocki)

   - Clean up multiple cpufreq drivers (Yangtao Li)

   - Update cpufreq-related MAINTAINERS entries (Baruch Siach, Lukas
     Bulwahn)

   - Add support for exposing the Energy Model via debugfs and make
     multiple cpufreq drivers register an Energy Model to support
     energy-aware scheduling (Quentin Perret, Dietmar Eggemann, Matthias
     Kaehlcke)

   - Add Ice Lake mobile and Jacobsville support to the Intel RAPL
     power-capping driver (Gayatri Kammela, Zhang Rui)

   - Add a power estimation helper to the operating performance points
     (OPP) framework and clean up a core function in it (Quentin Perret,
     Viresh Kumar)

   - Make minor improvements in the generic power domains (genpd), OPP
     and system suspend frameworks and in the PM core (Aditya Pakki,
     Douglas Anderson, Greg Kroah-Hartman, Rafael Wysocki, Yangtao Li)"

* tag 'pm-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (80 commits)
  cpufreq: kryo: Release OPP tables on module removal
  cpufreq: ap806: add missing of_node_put after of_device_is_available
  cpufreq: acpi-cpufreq: Report if CPU doesn't support boost technologies
  cpufreq: Pass updated policy to driver ->setpolicy() callback
  cpufreq: Fix two debug messages in cpufreq_set_policy()
  cpufreq: Reorder and simplify cpufreq_update_policy()
  cpufreq: Add kerneldoc comments for two core functions
  PM / core: Add support to skip power management in device/driver model
  cpufreq: intel_pstate: Rework iowait boosting to be less aggressive
  cpufreq: intel_pstate: Eliminate intel_pstate_get_base_pstate()
  cpufreq: intel_pstate: Avoid redundant initialization of local vars
  powercap/intel_rapl: add Ice Lake mobile
  ACPI / processor: Set P_LVL{2,3} idle state descriptions
  cpufreq / cppc: Work around for Hisilicon CPPC cpufreq
  ACPI / CPPC: Add a helper to get desired performance
  cpufreq: davinci: move configuration to include/linux/platform_data
  cpufreq: speedstep: convert BUG() to BUG_ON()
  cpufreq: powernv: fix missing check of return value in init_powernv_pstates()
  cpufreq: longhaul: remove unneeded semicolon
  cpufreq: pcc-cpufreq: remove unneeded semicolon
  ..

Merge misc updates from Andrew Morton:

 - a few misc things

 - ocfs2 updates

 - most of MM

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (159 commits)
  tools/testing/selftests/proc/proc-self-syscall.c: remove duplicate include
  proc: more robust bulk read test
  proc: test /proc/*/maps, smaps, smaps_rollup, statm
  proc: use seq_puts() everywhere
  proc: read kernel cpu stat pointer once
  proc: remove unused argument in proc_pid_lookup()
  fs/proc/thread_self.c: code cleanup for proc_setup_thread_self()
  fs/proc/self.c: code cleanup for proc_setup_self()
  proc: return exit code 4 for skipped tests
  mm,mremap: bail out earlier in mremap_to under map pressure
  mm/sparse: fix a bad comparison
  mm/memory.c: do_fault: avoid usage of stale vm_area_struct
  writeback: fix inode cgroup switching comment
  mm/huge_memory.c: fix "orig_pud" set but not used
  mm/hotplug: fix an imbalance with DEBUG_PAGEALLOC
  mm/memcontrol.c: fix bad line in comment
  mm/cma.c: cma_declare_contiguous: correct err handling
  mm/page_ext.c: fix an imbalance with kmemleak
  mm/compaction: pass pgdat to too_many_isolated() instead of zone
  mm: remove zone_lru_lock() function, access ->lru_lock directly
  ...

Pull ARM SoC late updates from Arnd Bergmann:
 "Here are two branches that came relatively late during the linux-5.0
  development cycle and have dependencies on the other branches:

   - On the TI OMAP platform, the CPSW Ethernet PHY mode selection
     driver is being replaced, this puts the final pieces in place

   - On the DaVinci platform, the interrupt handling code in arch/arm
     gets moved into a regular device driver in drivers/irqchip.

  Since they both had some time in linux-next after the 5.0-rc8 release,
  I'm sending them along with the other updates"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits)
  net: ethernet: ti: cpsw: deprecate cpsw-phy-sel driver
  ARM: davinci: remove intc related fields from davinci_soc_info
  irqchip: davinci-cp-intc: move the driver to drivers/irqchip
  ARM: davinci: cp-intc: remove redundant comments
  ARM: davinci: cp-intc: drop GPL license boilerplate
  ARM: davinci: cp-intc: use readl/writel_relaxed()
  ARM: davinci: cp-intc: unify error handling
  ARM: davinci: cp-intc: improve coding style
  ARM: davinci: cp-intc: request the memory region before remapping it
  ARM: davinci: cp-intc: use the new-style config structure
  ARM: davinci: cp-intc: convert all hex numbers to lowercase
  ARM: davinci: cp-intc: use a common prefix for all symbols
  ARM: davinci: cp-intc: add the new config structures for da8xx SoCs
  irqchip: davinci-cp-intc: add a new config structure
  ARM: davinci: cp-intc: add a wrapper around cp_intc_init()
  ARM: davinci: cp-intc: remove cp_intc.h
  irqchip: davinci-aintc: move the driver to drivers/irqchip
  ARM: davinci: aintc: remove unnecessary includes
  ARM: davinci: aintc: remove the timer-specific irq_set_handler()
  ARM: davinci: aintc: request memory region before remapping it
  ...

Pull ARM new SoC family support from Arnd Bergmann:
 "Two new SoC families are added this time.

  Sugaya Taichi submitted support for the Milbeaut SoC family from
  Socionext and explains:

    "SC2000 is a SoC of the Milbeaut series. equipped with a DSP
     optimized for computer vision. It also features advanced
     functionalities such as 360-degree, real-time spherical stitching
     with multi cameras, image stabilization for without mechanical
     gimbals, and rolling shutter correction. More detail is below:

       https://www.socionext.com/en/products/assp/milbeaut/SC2000.html"

  Interestingly, this one has a history dating back to older chips made
  by Socionext and previously Matsushita/Panasonic based on their own
  mn10300 CPU architecture that was removed from the kernel last year.

  Manivannan Sadhasivam adds support for another SoC family, this is the
  Bitmain BM1880 chip used in the Sophon Edge TPU developer board.

  The chip is intended for Deep Learning applications, and comes with
  dual-core Arm Cortex-A53 to run Linux as well as a RISC-V
  microcontroller core to control the tensor unit. For the moment, the
  TPU is not accessible in mainline Linux, so we treat it as a generic
  Arm SoC.

  More information is available at

       https://www.sophon.ai/"

* tag 'armsoc-newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: multi_v7_defconfig: add ARCH_MILBEAUT and ARCH_MILBEAUT_M10V
  ARM: configs: Add Milbeaut M10V defconfig
  ARM: dts: milbeaut: Add device tree set for the Milbeaut M10V board
  clocksource/drivers/timer-milbeaut: Introduce timer for Milbeaut SoCs
  dt-bindings: timer: Add Milbeaut M10V timer description
  ARM: milbeaut: Add basic support for Milbeaut m10v SoC
  dt-bindings: Add documentation for Milbeaut SoCs
  dt-bindings: arm: Add SMP enable-method for Milbeaut
  dt-bindings: sram: milbeaut: Add binding for Milbeaut smp-sram
  MAINTAINERS: Add entry for Bitmain SoC platform
  arm64: dts: bitmain: Add Sophon Egde board support
  arm64: dts: bitmain: Add BM1880 SoC support
  arm64: Add ARCH_BITMAIN platform
  dt-bindings: arm: Document Bitmain BM1880 SoC

Pull ARM SoC defconfig updates from Arnd Bergmann:
 "We regenerated the defconfig files for samsung, shmobile, lpc18xx,
  lpc32xx, omap2, and nhk8815.

  Lots of additional drivers added on samsung and nhk8815, as well as
  the new pl110 driver on all machines that have it.

  The remaining changes are mostly to enable newly added drivers, and in
  case of imx8mq together with the SoC getting merged"

* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
  ARM: spear3xx_defconfig: Activate PL111 DRM driver
  ARM: nhk8815_defconfig: Add new options
  ARM: nhk8815_defconfig: Update defconfig
  ARM: pxa: remove CONFIG_SND_PXA2XX_AC97 in pxa_defconfig
  ARM: defconfig: integrator: Switch to DRM
  arm64: defconfig: Add IMX2+ watchdog
  arm64: defconfig: Enable PFUZE100 regulator
  arm64: defconfig: enable NXP FlexSPI driver
  arm64: defconfig: Add i.MX8MQ boot necessary configs
  arm64: defconfig: add imx8qxp support
  arm64: defconfig: add i.MX system controller RTC support
  arm64: defconfig: Enable Tegra TCU
  arm64: defconfig: Enable MAX8973 regulator
  ARM: socfpga_defconfig: enable BLK_DEV_LOOP config option
  ARM: defconfig: lpc32xx: enable DRM simple panel driver
  ARM: defconfig: lpc32xx: enable fixed voltage regulator support
  arm64: defconfig: Enable SUN6I Camera sensor interface
  arm64: defconfig: Enable I2C_GPIO
  ARM: omap2plus_defconfig: Update for moved options
  ARM: omap2plus_defconfig: Update for dropped options
  ...

Pull ARM SoC driver updates from Arnd Bergmann:
 "As usual, the drivers/tee and drivers/reset subsystems get merged
  here, with the expected set of smaller updates and some new hardware
  support. The tee subsystem now supports device drivers to be attached
  to a tee, the first example here is a random number driver with its
  implementation in the secure world.

  Three new power domain drivers get added for specific chip families:
   - Broadcom BCM283x chips (used in Raspberry Pi)
   - Qualcomm Snapdragon phone chips
   - Xilinx ZynqMP FPGA SoCs

  One new driver is added to talk to the BPMP firmware on NVIDIA
  Tegra210

  Existing drivers are extended for new SoC variants from NXP, NVIDIA,
  Amlogic and Qualcomm"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (113 commits)
  tee: optee: update optee_msg.h and optee_smc.h to dual license
  tee: add cancellation support to client interface
  dpaa2-eth: configure the cache stashing amount on a queue
  soc: fsl: dpio: configure cache stashing destination
  soc: fsl: dpio: enable frame data cache stashing per software portal
  soc: fsl: guts: make fsl_guts_get_svr() static
  hwrng: make symbol 'optee_rng_id_table' static
  tee: optee: Fix unsigned comparison with less than zero
  hwrng: Fix unsigned comparison with less than zero
  tee: fix possible error pointer ctx dereferencing
  hwrng: optee: Initialize some structs using memset instead of braces
  tee: optee: Initialize some structs using memset instead of braces
  soc: fsl: dpio: fix memory leak of a struct qbman on error exit path
  clk: tegra: dfll: Make symbol 'tegra210_cpu_cvb_tables' static
  soc: qcom: llcc-slice: Fix typos
  qcom: soc: llcc-slice: Consolidate some code
  qcom: soc: llcc-slice: Clear the global drv_data pointer on error
  drivers: soc: xilinx: Add ZynqMP power domain driver
  firmware: xilinx: Add APIs to control node status/power
  dt-bindings: power: Add ZynqMP power domain bindings
  ...

Pull ARM SoC device tree updates from Arnd Bergmann:
 "This is a smaller update than the past few times, but with just over
  500 non-merge changesets still dwarfes the rest of the SoC tree.

  Three new SoC platforms get added, each one a follow-up to an existing
  product, and added here in combination with a reference platform:

   - Renesas RZ/A2M (R7S9210) 32-bit Cortex-A9 Real-time imaging
     processor:

       https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rza/rza2m.html

   - Renesas RZ/G2E (r8a774c0) 64-bit Cortex-A53 SoC "for Rich Graphics
     Applications":

       https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rzg/rzg2e.html

   - NXP i.MX8QuadXPlus 64-bit Cortex-A35 SoC:

       https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/i.mx-applications-processors/i.mx-8-processors/i.mx-8x-family-arm-cortex-a35-3d-graphics-4k-video-dsp-error-correcting-code-on-ddr:i.MX8X

  These are actual commercial products we now support with an in-kernel
  device tree source file:

   - Bosch Guardian is a product made by Bosch Power Tools GmbH, based
     on the Texas Instruments AM335x chip

   - Winterland IceBoard is a Texas Instruments AM3874 based machine
     used in telescopes at the south pole and elsewhere, see commit
     d0317731 for some pointers:

   - Inspur on5263m5 is an x86 server platform with an Aspeed ast2500
     baseboard management controller. This is for running on the BMC.

   - Zodiac Digital Tapping Unit, apparently a kind of ethernet switch
     used in airplanes.

   - Phicomm K3 is a WiFi router based on Broadcom bcm47094

   - Methode Electronics uDPU FTTdp distribution point unit

   - X96 Max, a generic TV box based on Amlogic G12a (S905X2)

   - NVIDIA Shield TV (Darcy) based on Tegra210

  And then there are several new SBC, evaluation, development or modular
  systems that we add:

   - Three new Rockchips rk3399 based boards:
       - FriendlyElec NanoPC-T4 and NanoPi M4
       - Radxa ROCK Pi 4

   - Five new i.MX6 family SoM modules and boards for industrial
     products:
       - Logic PD i.MX6QD SoM and evaluation baseboad
       - Y Soft IOTA Draco/Hydra/Ursa family boards based on i.MX6DL
       - Phytec phyCORE i.MX6 UltraLite SoM and evaluation module

   - MYIR Tech MYD-LPC4357 development based on the NXP lpc4357
     microcontroller

   - Chameleon96, an Intel/Altera Cyclone5 based FPGA development system
     in 96boards form factor

   - Arm Fixed Virtual Platforms(FVP) Base RevC, a purely virtual
     platform for corresponding to the latest "fast model"

   - Another Raspberry Pi variant: Model 3 A+, supported both in 32-bit
     and 64-bit mode.

   - Oxalis Evalkit V100 based on NXP Layerscape LS1012a, in 96Boards
     enterprise form factor

   - Elgin RV1108 R1 development board based on 32-bit Rockchips RV1108

  For already supported boards and SoCs, we often add support for new
  devices after merging the drivers. This time, the largest changes
  include updates for

   - STMicroelectronics stm32mp1, which was now formally launched last
     week

   - Qualcomm Snapdragon 845, a high-end phone and low-end laptop chip

   - Action Semi S700

   - TI AM654x, their recently merged 64-bit SoC from the OMAP family

   - Various Amlogic Meson SoCs

   - Mediatek MT2712

   - NVIDIA Tegra186 and Tegra210

   - The ancient NXP lpc32xx family

   - Samsung s5pv210, used in some older mobile phones

  Many other chips see smaller updates and bugfixes beyond that"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (506 commits)
  ARM: dts: exynos: Fix max voltage for buck8 regulator on Odroid XU3/XU4
  dt-bindings: net: ti: deprecate cpsw-phy-sel bindings
  ARM: dts: am335x: switch to use phy-gmii-sel
  ARM: dts: am4372: switch to use phy-gmii-sel
  ARM: dts: dm814x: switch to use phy-gmii-sel
  ARM: dts: dra7: switch to use phy-gmii-sel
  arch: arm: dts: kirkwood-rd88f6281: Remove disabled marvell,dsa reference
  ARM: dts: exynos: Add support for secondary DAI to Odroid XU4
  ARM: dts: exynos: Add support for secondary DAI to Odroid XU3
  ARM: dts: exynos: Disable ARM PMU on Odroid XU3-lite
  ARM: dts: exynos: Add stdout path property to Arndale board
  ARM: dts: exynos: Add minimal clkout parameters to Exynos3250 PMU
  ARM: dts: exynos: Enable ADC on Odroid HC1
  arm64: dts: sprd: Remove wildcard compatible string
  arm64: dts: sprd: Add SC27XX fuel gauge device
  arm64: dts: sprd: Add SC2731 charger device
  arm64: dts: sprd: Add ADC calibration support
  arm64: dts: sprd: Remove PMIC INTC irq trigger type
  arm64: dts: rockchip: Enable tsadc device on rock960
  ARM: dts: rockchip: add chosen node on veyron devices
  ...

Pull ARM SoC platform updates from Arnd Bergmann:
 "The APM X-Gene platform is now maintained by folks from Ampere
  computing that took over the product line a while ago, this gets
  reflected in the MAINTAINERS file.

  Cleanups continue on the older mach-davinci and mach-pxa platform, to
  get them to be more like the modern ones. For pxa, we now remove the
  Raumfeld platform code as it now works with device tree based booting.

  i.MX adds a couple new features for the i.MX7ULP SoC

  Mediatek gains support for a new SoC: MT7629 is a new wireless router
  platform, following MT7623.

  Aside from those, there are the usual minor cleanups and bugfixes
  across several platforms"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (49 commits)
  MAINTAINERS: Update Ampere email address
  usb: ohci-da8xx: remove unused callbacks from platform data
  ARM: davinci: da830-evm: remove legacy usb helpers
  ARM: davinci: omapl138-hawk: remove legacy usb helpers
  usb: ohci-da8xx: add vbus and overcurrent gpios
  ARM: davinci: da830-evm: use gpio lookup entries for usb gpios
  ARM: davinci: omapl138-hawk: use gpio lookup entries for usb gpios
  usb: ohci-da8xx: add a helper pointer to &pdev->dev
  usb: ohci-da8xx: add a new line after local variables
  arm64: meson: enable g12a clock controller
  MAINTAINERS: Add entry for uDPU board
  ARM: davinci: da850-evm: use GPIO hogs instead of the legacy API
  arm: mediatek: add MT7629 smp bring up code
  Revert "ARM: mediatek: add MT7623a smp bringup code"
  dt-bindings: soc: fix typo of MT8173 power dt-bindings
  ARM: meson: remove COMMON_CLK_AMLOGIC selection
  arm64: meson: remove COMMON_CLK_AMLOGIC selection
  ARM: lpc32xx: remove platform data of ARM PL111 LCD controller
  ARM: lpc32xx: remove platform data of ARM PL180 SD/MMC controller
  ARM: lpc32xx: Use kmemdup to replace duplicating its implementation
  ...

Pull asm-generic updates from Arnd Bergmann:
 "Only a few small changes this time:

   - Michael S. Tsirkin cleans up linux/mman.h

   - Mike Rapoport found a typo

  I had originally merged another cleanup series for I/O accessors from
  Hugo Lefeuvre as well, but dropped it after the discussion of the
  barrier semantics and some conflicts. I expect this series to get
  merged for a later release though"

* tag 'asm-generic-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic/page.h: fix typo in #error text requiring a real asm/page.h
  arch: move common mmap flags to linux/mman.h
  drm: tweak header name
  x86/mpx: tweak header name

Pull y2038 build fix for compat mode from Arnd Bergmann:
 "Here is one more patch on top of the y2038 changes already pulled for
  linux-5.1, for some reason this had escaped all testing"

* tag 'y2038-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground:
  ipc: Fix building compat mode without sysvipc

Pull x86 alternative instruction updates from Ingo Molnar:
 "Small RDTSCP opimization, enabled by the newly added ALTERNATIVE_3(),
  and other small improvements"

* 'x86-alternatives-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/TSC: Use RDTSCP
  x86/alternatives: Add an ALTERNATIVE_3() macro
  x86/alternatives: Print containing function
  x86/alternatives: Add macro comments

Pull scheduler updates from Ingo Molnar:
 "The main changes in this cycle were:

   - refcount conversions

   - Solve the rq->leaf_cfs_rq_list can of worms for real.

   - improve power-aware scheduling

   - add sysctl knob for Energy Aware Scheduling

   - documentation updates

   - misc other changes"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
  kthread: Do not use TIMER_IRQSAFE
  kthread: Convert worker lock to raw spinlock
  sched/fair: Use non-atomic cpumask_{set,clear}_cpu()
  sched/fair: Remove unused 'sd' parameter from select_idle_smt()
  sched/wait: Use freezable_schedule() when possible
  sched/fair: Prune, fix and simplify the nohz_balancer_kick() comment block
  sched/fair: Explain LLC nohz kick condition
  sched/fair: Simplify nohz_balancer_kick()
  sched/topology: Fix percpu data types in struct sd_data & struct s_data
  sched/fair: Simplify post_init_entity_util_avg() by calling it with a task_struct pointer argument
  sched/fair: Fix O(nr_cgroups) in the load balancing path
  sched/fair: Optimize update_blocked_averages()
  sched/fair: Fix insertion in rq->leaf_cfs_rq_list
  sched/fair: Add tmp_alone_branch assertion
  sched/core: Use READ_ONCE()/WRITE_ONCE() in move_queued_task()/task_rq_lock()
  sched/debug: Initialize sd_sysctl_cpus if !CONFIG_CPUMASK_OFFSTACK
  sched/pelt: Skip updating util_est when utilization is higher than CPU's capacity
  sched/fair: Update scale invariance of PELT
  sched/fair: Move the rq_of() helper function
  sched/core: Convert task_struct.stack_refcount to refcount_t
  ...

Pull perf updates from Ingo Molnar:
 "Lots of tooling updates - too many to list, here's a few highlights:

   - Various subcommand updates to 'perf trace', 'perf report', 'perf
     record', 'perf annotate', 'perf script', 'perf test', etc.

   - CPU and NUMA topology and affinity handling improvements,

   - HW tracing and HW support updates:
      - Intel PT updates
      - ARM CoreSight updates
      - vendor HW event updates

   - BPF updates

   - Tons of infrastructure updates, both on the build system and the
     library support side

   - Documentation updates.

   - ... and lots of other changes, see the changelog for details.

  Kernel side updates:

   - Tighten up kprobes blacklist handling, reduce the number of places
     where developers can install a kprobe and hang/crash the system.

   - Fix/enhance vma address filter handling.

   - Various PMU driver updates, small fixes and additions.

   - refcount_t conversions

   - BPF updates

   - error code propagation enhancements

   - misc other changes"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (238 commits)
  perf script python: Add Python3 support to syscall-counts-by-pid.py
  perf script python: Add Python3 support to syscall-counts.py
  perf script python: Add Python3 support to stat-cpi.py
  perf script python: Add Python3 support to stackcollapse.py
  perf script python: Add Python3 support to sctop.py
  perf script python: Add Python3 support to powerpc-hcalls.py
  perf script python: Add Python3 support to net_dropmonitor.py
  perf script python: Add Python3 support to mem-phys-addr.py
  perf script python: Add Python3 support to failed-syscalls-by-pid.py
  perf script python: Add Python3 support to netdev-times.py
  perf tools: Add perf_exe() helper to find perf binary
  perf script: Handle missing fields with -F +..
  perf data: Add perf_data__open_dir_data function
  perf data: Add perf_data__(create_dir|close_dir) functions
  perf data: Fail check_backup in case of error
  perf data: Make check_backup work over directories
  perf tools: Add rm_rf_perf_data function
  perf tools: Add pattern name checking to rm_rf
  perf tools: Add depth checking to rm_rf
  perf data: Add global path holder
  ...

Pull locking updates from Ingo Molnar:
 "The biggest part of this tree is the new auto-generated atomics API
  wrappers by Mark Rutland.

  The primary motivation was to allow instrumentation without uglifying
  the primary source code.

  The linecount increase comes from adding the auto-generated files to
  the Git space as well:

    include/asm-generic/atomic-instrumented.h     | 1689 ++++++++++++++++--
    include/asm-generic/atomic-long.h             | 1174 ++++++++++---
    include/linux/atomic-fallback.h               | 2295 +++++++++++++++++++++++++
    include/linux/atomic.h                        | 1241 +------------

  I preferred this approach, so that the full call stack of the (already
  complex) locking APIs is still fully visible in 'git grep'.

  But if this is excessive we could certainly hide them.

  There's a separate build-time mechanism to determine whether the
  headers are out of date (they should never be stale if we do our job
  right).

  Anyway, nothing from this should be visible to regular kernel
  developers.

  Other changes:

   - Add support for dynamic keys, which removes a source of false
     positives in the workqueue code, among other things (Bart Van
     Assche)

   - Updates to tools/memory-model (Andrea Parri, Paul E. McKenney)

   - qspinlock, wake_q and lockdep micro-optimizations (Waiman Long)

   - misc other updates and enhancements"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits)
  locking/lockdep: Shrink struct lock_class_key
  locking/lockdep: Add module_param to enable consistency checks
  lockdep/lib/tests: Test dynamic key registration
  lockdep/lib/tests: Fix run_tests.sh
  kernel/workqueue: Use dynamic lockdep keys for workqueues
  locking/lockdep: Add support for dynamic keys
  locking/lockdep: Verify whether lock objects are small enough to be used as class keys
  locking/lockdep: Check data structure consistency
  locking/lockdep: Reuse lock chains that have been freed
  locking/lockdep: Fix a comment in add_chain_cache()
  locking/lockdep: Introduce lockdep_next_lockchain() and lock_chain_count()
  locking/lockdep: Reuse list entries that are no longer in use
  locking/lockdep: Free lock classes that are no longer in use
  locking/lockdep: Update two outdated comments
  locking/lockdep: Make it easy to detect whether or not inside a selftest
  locking/lockdep: Split lockdep_free_key_range() and lockdep_reset_lock()
  locking/lockdep: Initialize the locks_before and locks_after lists earlier
  locking/lockdep: Make zap_class() remove all matching lock order entries
  locking/lockdep: Reorder struct lock_class members
  locking/lockdep: Avoid that add_chain_cache() adds an invalid chain to the cache
  ...

Pull EFI updates from Ingo Molnar:
 "The main EFI changes in this cycle were:

   - Use 32-bit alignment for efi_guid_t

   - Allow the SetVirtualAddressMap() call to be omitted

   - Implement earlycon=efifb based on existing earlyprintk code

   - Various minor fixes and code cleanups from Sai, Ard and me"

* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: Fix build error due to enum collision between efi.h and ima.h
  efi/x86: Convert x86 EFI earlyprintk into generic earlycon implementation
  x86: Make ARCH_USE_MEMREMAP_PROT a generic Kconfig symbol
  efi/arm/arm64: Allow SetVirtualAddressMap() to be omitted
  efi: Replace GPL license boilerplate with SPDX headers
  efi/fdt: Apply more cleanups
  efi: Use 32-bit alignment for efi_guid_t
  efi/memattr: Don't bail on zero VA if it equals the region's PA
  x86/efi: Mark can_free_region() as an __init function

As John Stultz noticed, my y2038 syscall series caused a link
failure when CONFIG_SYSVIPC is disabled but CONFIG_COMPAT is
enabled:

arch/arm64/kernel/sys32.o:(.rodata+0x960): undefined reference to `__arm64_compat_sys_old_semctl'
arch/arm64/kernel/sys32.o:(.rodata+0x980): undefined reference to `__arm64_compat_sys_old_msgctl'
arch/arm64/kernel/sys32.o:(.rodata+0x9a0): undefined reference to `__arm64_compat_sys_old_shmctl'

Add the missing entries in kernel/sys_ni.c for the new system
calls.

Cc: Laura Abbott <labbott@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Remove duplicate header which is included twice.

Link: http://lkml.kernel.org/r/20190304182719.GA6606@jordon-HP-15-Notebook-PCSigned-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

/proc may not be mounted and test will exit successfully.

Ensure proc is mounted at /proc.

Link: http://lkml.kernel.org/r/20190209105613.GA10384@avx2Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Start testing VM related fiels found in per-process files.

Do it by jiting small executable which brings its address space to
precisely known state, then comparing /proc/*/maps, smaps, smaps_rollup,
and statm files to expected values.

Currently only x86_64 is supported.

[adobriyan@gmail.com: exit correctly in /proc/*/maps test]
  Link: http://lkml.kernel.org/r/20190206073659.GB15311@avx2
Link: http://lkml.kernel.org/r/20190203165806.GA14568@avx2Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

seq_printf() without format specifiers == faster seq_puts()

Link: http://lkml.kernel.org/r/20190114200545.GC9680@avx2Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Help gcc generate better code:

	$ ./scripts/bloat-o-meter ../vmlinux-000 ../vmlinux-001
	add/remove: 2/2 grow/shrink: 0/1 up/down: 92/-142 (-50)
	Function                                     old     new   delta
	get_iowait_time.isra                           -      46     +46
	get_idle_time.isra                             -      46     +46
	show_stat                                   1489    1477     -12
	get_iowait_time                               65       -     -65
	get_idle_time                                 65       -     -65

Link: http://lkml.kernel.org/r/20190114195907.GA9680@avx2Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[adobriyan@gmail.com: delete "extern" from prototype]
Link: http://lkml.kernel.org/r/20190114195635.GA9372@avx2Signed-off-by: Zhikang Zhang <zhangzhikang1@huawei.com>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove unnecessary ERR_PTR()/PTR_ERR() cast in proc_setup_thread_self().

Link: http://lkml.kernel.org/r/20190124030150.8472-2-cgxu519@gmx.comSigned-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove unnecessary ERR_PTR()/PTR_ERR() cast in proc_setup_self().

Link: http://lkml.kernel.org/r/20190124030150.8472-1-cgxu519@gmx.comSigned-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Test harness uses 4 for SKIP, not 2.

Link: http://lkml.kernel.org/r/20190108193108.GA12259@avx2Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When using mremap() syscall in addition to MREMAP_FIXED flag, mremap()
calls mremap_to() which does the following:

1) unmaps the destination region where we are going to move the map
2) If the new region is going to be smaller, we unmap the last part
   of the old region

Then, we will eventually call move_vma() to do the actual move.

move_vma() checks whether we are at least 4 maps below max_map_count
before going further, otherwise it bails out with -ENOMEM.  The problem
is that we might have already unmapped the vma's in steps 1) and 2), so
it is not possible for userspace to figure out the state of the vmas
after it gets -ENOMEM, and it gets tricky for userspace to clean up
properly on error path.

While it is true that we can return -ENOMEM for more reasons (e.g: see
may_expand_vm() or move_page_tables()), I think that we can avoid this
scenario if we check early in mremap_to() if the operation has high
chances to succeed map-wise.

Should that not be the case, we can bail out before we even try to unmap
anything, so we make sure the vma's are left untouched in case we are
likely to be short of maps.

The thumb-rule now is to rely on the worst-scenario case we can have.
That is when both vma's (old region and new region) are going to be
split in 3, so we get two more maps to the ones we already hold (one per
each).  If current map count + 2 maps still leads us to 4 maps below the
threshold, we are going to pass the check in move_vma().

Of course, this is not free, as it might generate false positives when
it is true that we are tight map-wise, but the unmap operation can
release several vma's leading us to a good state.

Another approach was also investigated [1], but it may be too much
hassle for what it brings.

[1] https://lore.kernel.org/lkml/20190219155320.tkfkwvqk53tfdojt@d104.suse.de/

Link: http://lkml.kernel.org/r/20190226091314.18446-1-osalvador@suse.deSigned-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Cyril Hrubis <chrubis@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

next_present_section_nr() could only return an unsigned number -1, so
just check it specifically where compilers will convert -1 to unsigned
if needed.

  mm/sparse.c: In function 'sparse_init_nid':
  mm/sparse.c:200:20: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
         ((section_nr >= 0) &&    \
                      ^~
  mm/sparse.c:478:2: note: in expansion of macro
  'for_each_present_section_nr'
    for_each_present_section_nr(pnum_begin, pnum) {
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~
  mm/sparse.c:200:20: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
         ((section_nr >= 0) &&    \
                      ^~
  mm/sparse.c:497:2: note: in expansion of macro
  'for_each_present_section_nr'
    for_each_present_section_nr(pnum_begin, pnum) {
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~
  mm/sparse.c: In function 'sparse_init':
  mm/sparse.c:200:20: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
         ((section_nr >= 0) &&    \
                      ^~
  mm/sparse.c:520:2: note: in expansion of macro
  'for_each_present_section_nr'
    for_each_present_section_nr(pnum_begin + 1, pnum_end) {
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~

Link: http://lkml.kernel.org/r/20190228181839.86504-1-cai@lca.pw
Fixes: c4e1be9e ("mm, sparsemem: break out of loops early")
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

LTP testcase mtest06 [1] can trigger a crash on s390x running 5.0.0-rc8.
This is a stress test, where one thread mmaps/writes/munmaps memory area
and other thread is trying to read from it:

  CPU: 0 PID: 2611 Comm: mmap1 Not tainted 5.0.0-rc8+ #51
  Hardware name: IBM 2964 N63 400 (z/VM 6.4.0)
  Krnl PSW : 0404e00180000000 00000000001ac8d8 (__lock_acquire+0x7/0x7a8)
  Call Trace:
  ([<0000000000000000>]           (null))
   [<00000000001adae4>] lock_acquire+0xec/0x258
   [<000000000080d1ac>] _raw_spin_lock_bh+0x5c/0x98
   [<000000000012a780>] page_table_free+0x48/0x1a8
   [<00000000002f6e54>] do_fault+0xdc/0x670
   [<00000000002fadae>] __handle_mm_fault+0x416/0x5f0
   [<00000000002fb138>] handle_mm_fault+0x1b0/0x320
   [<00000000001248cc>] do_dat_exception+0x19c/0x2c8
   [<000000000080e5ee>] pgm_check_handler+0x19e/0x200

page_table_free() is called with NULL mm parameter, but because "0" is a
valid address on s390 (see S390_lowcore), it keeps going until it
eventually crashes in lockdep's lock_acquire.  This crash is
reproducible at least since 4.14.

Problem is that "vmf->vma" used in do_fault() can become stale.  Because
mmap_sem may be released, other threads can come in, call munmap() and
cause "vma" be returned to kmem cache, and get zeroed/re-initialized and
re-used:

handle_mm_fault                           |
  __handle_mm_fault                       |
    do_fault                              |
      vma = vmf->vma                      |
      do_read_fault                       |
        __do_fault                        |
          vma->vm_ops->fault(vmf);        |
            mmap_sem is released          |
                                          |
                                          | do_munmap()
                                          |   remove_vma_list()
                                          |     remove_vma()
                                          |       vm_area_free()
                                          |         # vma is released
                                          | ...
                                          | # same vma is allocated
                                          | # from kmem cache
                                          | do_mmap()
                                          |   vm_area_alloc()
                                          |     memset(vma, 0, ...)
                                          |
      pte_free(vma->vm_mm, ...);          |
        page_table_free                   |
          spin_lock_bh(&mm->context.lock);|
            <crash>                       |

Cache mm_struct to avoid using potentially stale "vma".

[1] https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/mem/mtest06/mmap1.c

Link: http://lkml.kernel.org/r/5b3fdf19e2a5be460a384b936f5b56e13733f1b8.1551595137.git.jstancek@redhat.comSigned-off-by: Jan Stancek <jstancek@redhat.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Acked-by: Rafael Aquini <aquini@redhat.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 682aa8e1 ("writeback: implement unlocked_inode_to_wb
transaction and use it for stat updates") refers to
inode_switch_wb_work_fn() which never got merged.

Switch the comments to inode_switch_wbs_work_fn().

Link: http://lkml.kernel.org/r/20190305004617.142590-1-gthelen@google.com
Fixes: 682aa8e1 ("writeback: implement unlocked_inode_to_wb transaction and use it for stat updates")
Signed-off-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit a00cc7d9 ("mm, x86: add support for PUD-sized transparent
hugepages") introduced pudp_huge_get_and_clear_full() but no one uses
its return code.

In order to not diverge from pmdp_huge_get_and_clear_full(), just change
zap_huge_pud() to not assign the return value from
pudp_huge_get_and_clear_full().

  mm/huge_memory.c: In function 'zap_huge_pud':
  mm/huge_memory.c:1982:8: warning: variable 'orig_pud' set but not used [-Wunused-but-set-variable]
    pud_t orig_pud;
          ^~~~~~~~

Link: http://lkml.kernel.org/r/20190301221956.97493-1-cai@lca.pwSigned-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>