- 15 Jun, 2021 14 commits
-
-
Yang Yingliang authored
Use devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20210615135200.1661695-4-yangyingliang@huawei.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Yang Yingliang authored
Use devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by:
-
Yang Yingliang authored
Use devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by:
-
Yang Yingliang authored
Use devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by:
-
Yang Yingliang authored
Use devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by:
-
Srinivas Kandagatla authored
For some reason we ended up with cyclic dependency between snd_soc_wcd938x and snd_soc_wcd938x_sdw modules. Remove this cyclic dependency by handling them in respective modules. Without this below error is reported during make modules_install depmod: ERROR: Cycle detected: snd_soc_wcd938x -> snd_soc_wcd938x_sdw -> snd_soc_wcd938x depmod: ERROR: Found 2 modules in dependency cycles! Fixes: 04544222 ("ASoC: codecs: wcd938x: add audio routing and Kconfig") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210615132829.23067-1-srinivas.kandagatla@linaro.orgSigned-off-by:
-
Pu Lehui authored
The snd_soc_dai_ops structures is only stored in the ops field of a snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure const to allow the compiler to put it in read-only memory. Signed-off-by:
Pu Lehui <pulehui@huawei.com> Link: https://lore.kernel.org/r/20210615113324.238837-1-pulehui@huawei.comSigned-off-by:
-
Mark Brown authored
This series squashes all the ASoC machine drivers into a single one, this change was suggested by Jon Hunter. It also sets driver_name and components string of each card, allowing userspace alsa-lib to find UCMs at predictable path. Changelog: v6: - Fixed missed configuration of AC97 clock rate for the WM9712 codec in the unified driver. - Added new patch that removes now obsolete "utils" helpers and moves code into the unified driver. ASoC: tegra: Squash utils into common machine driver v5: - The v4 removed the customization of components string for Nexus 7, but I missed to remove the "components" hook which is unused now, it's removed in v5 for consistency. - Slightly improved naming of the common 12MHz MCLK rate function to make it more consistent with the rest of the driver functions. v4: - Moved out mclk_rate callback that is currently used only by WM8903 machine driver from the common driver. This was suggested by Jon Hunter. - Dropped patch which was setting custom components string for Nexus 7. Jaroslav Kysela wants it to be specified in a device-tree, but the components string doesn't have a firm specification for today. It's better to drop this change for now since it's optional anyways. - Fixed compilation error that was reported by kernel robot for v3. - Jaroslav Kysela merged alsa-ucm-conf PR [1] which added UCMs for Nexus 7 and Acer A500. The UCMs are fully working using a combination of updated kernel + alsa-ucm-conf master + alsa-lib master, meaning that they will work with the next releases of kernel and ALSA userspace upstream packages. - Added ack from Jaroslav Kysela to the "Specify components string for each card" patch that he gave to v3. v3: - Added components string as was suggested by Jaroslav Kysela to v2. - Renamed MCLK rate function that is used by max98090 and other codecs to make it look more generic. Added option for specifying CLK ID per device. This all was suggested by Jon Hunter to v2. v2: - Dropped use of of_device_compatible_match(), like it was suggested by Rob Herring in a review comment to v1. - Added patch that sets card's driver_name of as Tegra ASoC drivers. In a comment to v1 Jaroslav Kysela suggested that the Tegra drivers don't set the card name properly and he was right. I opened pull request with the new Tegra UCMs and updated lookup paths for older UCMs [1]. [1] https://github.com/alsa-project/alsa-ucm-conf/pull/92 Dmitry Osipenko (4): ASoC: tegra: Set driver_name=tegra for all machine drivers ASoC: tegra: Unify ASoC machine drivers ASoC: tegra: Specify components string for each card ASoC: tegra: Squash utils into common machine driver sound/soc/tegra/Kconfig | 12 + sound/soc/tegra/Makefile | 19 +- sound/soc/tegra/tegra_alc5632.c | 259 -------- sound/soc/tegra/tegra_asoc_machine.c | 854 +++++++++++++++++++++++++++ sound/soc/tegra/tegra_asoc_machine.h | 49 ++ sound/soc/tegra/tegra_asoc_utils.c | 225 ------- sound/soc/tegra/tegra_asoc_utils.h | 38 -- sound/soc/tegra/tegra_max98090.c | 276 --------- sound/soc/tegra/tegra_rt5640.c | 222 ------- sound/soc/tegra/tegra_rt5677.c | 324 ---------- sound/soc/tegra/tegra_sgtl5000.c | 211 ------- sound/soc/tegra/tegra_wm8753.c | 185 ------ sound/soc/tegra/tegra_wm8903.c | 351 +++-------- sound/soc/tegra/tegra_wm9712.c | 166 ------ sound/soc/tegra/trimslice.c | 172 ------ 15 files changed, 996 insertions(+), 2367 deletions(-) delete mode 100644 sound/soc/tegra/tegra_alc5632.c create mode 100644 sound/soc/tegra/tegra_asoc_machine.c create mode 100644 sound/soc/tegra/tegra_asoc_machine.h delete mode 100644 sound/soc/tegra/tegra_asoc_utils.c delete mode 100644 sound/soc/tegra/tegra_asoc_utils.h delete mode 100644 sound/soc/tegra/tegra_max98090.c delete mode 100644 sound/soc/tegra/tegra_rt5640.c delete mode 100644 sound/soc/tegra/tegra_rt5677.c delete mode 100644 sound/soc/tegra/tegra_sgtl5000.c delete mode 100644 sound/soc/tegra/tegra_wm8753.c delete mode 100644 sound/soc/tegra/tegra_wm9712.c delete mode 100644 sound/soc/tegra/trimslice.c -- 2.30.2 -
Shengjiu Wang authored
Add compatible string for imx8mm/8mn/8mp/8ulp, these platforms all support SAI IP. Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1622613770-10220-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Shengjiu Wang authored
Add compatible string for imx8ulp, which supports spdif module Signed-off-by:
-
Dmitry Osipenko authored
There no users left of the utils other than the new common machine driver. Squash the utils into the common machine driver in order to simplify code. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210529154649.25936-5-digetx@gmail.comSigned-off-by:
-
Dmitry Osipenko authored
Specify components string for each card of each supported device. It's a free form string that describes audio hardware configuration. This information is useful for ALSA UCM rules. It allows to generalize UCM rules, potentially removing a need to add new UCM rule for each device. Acked-by:
Jaroslav Kysela <perex@perex.cz> Suggested-by:
-
Dmitry Osipenko authored
Squash all machine drivers into a single-universal one. This reduces code duplication, eases addition of a new drivers and upgrades older code to a modern Linux kernel APIs. Suggested-by:
Jonathan Hunter <jonathanh@nvidia.com> Co-developed-by:
Ion Agorria <ion@agorria.com> Signed-off-by:
Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by:
-
Dmitry Osipenko authored
The driver_name="tegra" is now required by the newer ALSA UCMs, otherwise Tegra UCMs don't match by the path/name. All Tegra machine drivers are specifying the card's name, but it has no effect if model name is specified in the device-tree since it overrides the card's name. We need to set the driver_name to "tegra" in order to get a usable lookup path for the updated ALSA UCMs. The new UCM lookup path has a form of driver_name/card_name. The old lookup paths that are based on driver module name continue to work as before. Note that UCM matching never worked for Tegra ASoC drivers if they were compiled as built-in, this is fixed by supporting the new naming scheme. Cc: stable@vger.kernel.org Signed-off-by:
-
- 14 Jun, 2021 25 commits
-
-
Tan Zhongjun authored
The platform_get_irq() prints error message telling that interrupt is missing, hence there is no need to duplicated that message. Signed-off-by:
Tan Zhongjun <tanzhongjun@yulong.com> Acked-by:
Shengjiu Wang <shengjiu.wang@gmail.com> Link: https://lore.kernel.org/r/20210610040037.1064-1-hbut_tan@163.comSigned-off-by:
-
Yang Yingliang authored
Use devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by:
-
Yang Yingliang authored
Use the devm_platform_ioremap_resource_byname() helper instead of calling platform_get_resource_byname() and devm_ioremap_resource() separately. Signed-off-by:
-
Srinivasa Rao Mandadapu authored
Add four speaker support on MI2S secondary block by using I2S SD1 line on gpio52 pin, and add channel map control support in the lpass-cpu audio driver. Signed-off-by:
Srinivasa Rao Mandadapu <srivasam@codeaurora.org> Reviewed-by:
-
Martin Blumenstingl authored
The Realtek rt5640 codec driver can be used with the generic sound card drivers, so it should be selectable. For example, with the addition of #sound-dai-cells = <0> property in DT, it can be used with simple and graph card drivers. Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20210612200650.1301661-1-martin.blumenstingl@googlemail.comSigned-off-by:
-
Yang Yingliang authored
Use devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by:
-
Yang Yingliang authored
Use devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by:
-
Tan Zhongjun authored
Clean up the check for irq.dev_err is superfluous as platform_get_irq() already prints an error.Remove curly braces to confirm to styling requirements. Signed-off-by:
-
Jaroslav Kysela authored
In case, where the loops are not executed for a reason, the uninitialized variable 'err' is returned to the caller. Make code fully predictible and assign zero in the declaration. Signed-off-by:
-
Yang Yingliang authored
Use devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by:
-
Yang Yingliang authored
Use devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by:
-
Yang Yingliang authored
Use devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by:
-
Mark Brown authored
Merge series "ASoC: codecs: add wcd938x support" from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>: This patchset adds support for Qualcomm WCD938X codec. Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC connected over SoundWire. This device has two SoundWire devices, RX and TX respectively supporting 4 x ADCs, ClassH, Ear, Aux PA, 2xHPH, 7 x TX diff inputs, 8 DMICs and MBHC. Eventhough this device has two SoundWire devices, only tx device has access to main codec Control/Status Registers! For codec driver to be functional it would need both tx and rx Soundwire devices to be up and this is taken care by using device component framework and device-links are used to ensure proper pm dependencies. Ex tx does not enter suspend before rx or codec is suspended. This patchset along with other SoundWire patches on the list have been tested on SM8250 MTP device. Thanks, srini Changes since v8: - moved Kconfig and Makefile changes to last patch as suggested by Mark - removed array of enums and used static entries instead. Suggested by Mark - return true if put succeeds, Suggested by Mark - removed some unneeded semi-colons in switch Srinivas Kandagatla (9): ASoC: dt-bindings: wcd938x: add bindings for wcd938x ASoC: codecs: wcd-clsh: add new version support ASoC: codecs: wcd938x: add basic driver ASoC: dt-bindings: wcd938x-sdw: add bindings for wcd938x-sdw ASoC: codecs: wcd938x-sdw: add SoundWire driver ASoC: codecs: wcd938x: add basic controls ASoC: codecs: wcd938x: add playback dapm widgets ASoC: codecs: wcd938x: add capture dapm widgets ASoC: codecs: wcd938x: add audio routing and Kconfig .../bindings/sound/qcom,wcd938x-sdw.yaml | 70 + .../bindings/sound/qcom,wcd938x.yaml | 146 + sound/soc/codecs/Kconfig | 14 + sound/soc/codecs/Makefile | 4 + sound/soc/codecs/wcd-clsh-v2.c | 348 +- sound/soc/codecs/wcd-clsh-v2.h | 16 + sound/soc/codecs/wcd938x-sdw.c | 315 ++ sound/soc/codecs/wcd938x.c | 3753 +++++++++++++++++ sound/soc/codecs/wcd938x.h | 720 ++++ 9 files changed, 5376 insertions(+), 10 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml create mode 100644 sound/soc/codecs/wcd938x-sdw.c create mode 100644 sound/soc/codecs/wcd938x.c create mode 100644 sound/soc/codecs/wcd938x.h -- 2.21.0
-
Srinivas Kandagatla authored
This patch adds audio routing for both playback and capture and Makefile and Kconfigs changes for wcd938x Signed-off-by:
-
Srinivas Kandagatla authored
This patch adds required dapm widgets for capture path. Signed-off-by:
-
Srinivas Kandagatla authored
This patch adds required dapm widgets for playback. Signed-off-by:
-
Srinivas Kandagatla authored
This patch adds basic controls found in wcd938x codec. Signed-off-by:
-
Srinivas Kandagatla authored
This patch adds support to SoundWire devices on WCD9380/WCD9385 Codec Signed-off-by:
-
Srinivas Kandagatla authored
Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC connected over SoundWire. This device has two SoundWire devices RX and TX respectively. This bindings is for those slave devices on WCD9380/WCD9385. Signed-off-by:
-
Srinivas Kandagatla authored
This patch adds basic SoundWire codec driver to support for WCD938X TX and RX devices. Signed-off-by:
-
Srinivas Kandagatla authored
From WCD937X Class H controller has changed significantly, so add support to this new version for WCD937X and WCD938X Codecs. Signed-off-by:
-
Srinivas Kandagatla authored
Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC connected over SoundWire. This device has two SoundWire device RX and TX respectively, supporting 4 x ADCs, ClassH, Ear, Aux PA, 2xHPH, 7 x TX diff inputs, 8 DMICs, MBHC. Signed-off-by:
-
Yang Li authored
Eliminate the following coccicheck warning: ./sound/soc/codecs/wcd-mbhc-v2.c:990:2-3: Unneeded semicolon. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Reviewed-by:
-
Srinivasa Rao Mandadapu authored
The DMA interrupt clear register overwritten during simultaneous playback and capture in lpass platform interrupt handler. It's causing playback or capture stuck in similtaneous plaback on speaker and capture on dmic test. Update appropriate reg fields of corresponding channel instead of entire register write. Fixes: commit c5c8635a ("ASoC: qcom: Add LPASS platform driver") Signed-off-by:
-
Mark Brown authored
Merge tag 'asoc-hdmi-codec-improvements-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into asoc-5.14 Improvements to the hdmi-codec driver and ALSA infrastructure around it to support the HDMI Channel Mapping and IEC958 controls
-
- 10 Jun, 2021 1 commit
-
-
Maxime Ripard authored
The IEC958 status bit is usually set by the userspace after hw_params has been called, so in order to use whatever is set by the userspace, we need to implement the prepare hook. Let's add it to the hdmi_codec_ops, and mandate that either prepare or hw_params is implemented. Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Acked-by:
-
