- 03 Apr, 2020 3 commits
-
-
Christoph Hellwig authored
Add support for the Kendryte K210 RISC-V SoC. For now, this support only provides a simple sysctl driver allowing to setup the CPU and uart clock. This support is enabled through the new Kconfig option SOC_KENDRYTE and defines the config option CONFIG_K210_SYSCTL to enable the K210 SoC sysctl driver compilation. The sysctl driver also registers an early SoC initialization function allowing enabling the general purpose use of the 2MB of SRAM normally reserved for the SoC AI engine. This initialization function is automatically called before the dt early initialization using the flat dt root node compatible property matching the value "kendryte,k210". Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> [Palmer: Add missing endmenu in Kconfig.socs] Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Damien Le Moal authored
Add a mechanism for early SoC initialization for platforms that need additional hardware initialization not possible through the regular device tree and drivers mechanism. With this, a SoC specific initialization function can be called very early, before DTB parsing is done by parse_dtb() in Linux RISC-V kernel setup code. This can be very useful for early hardware initialization for No-MMU kernels booted directly in M-mode because it is quite likely that no other booting stage exist prior to the No-MMU kernel. Example use of a SoC early initialization is as follows: static void vendor_abc_early_init(const void *fdt) { /* * some early init code here that can use simple matches * against the flat device tree file. */ } SOC_EARLY_INIT_DECLARE("vendor,abc", abc_early_init); This early initialization function is executed only if the flat device tree for the board has a 'compatible = "vendor,abc"' entry; Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Damien Le Moal authored
Add handlers for unaligned load and store traps that may be generated by applications. Code heavily inspired from the OpenSBI project. Handling of the unaligned access traps is suitable for applications compiled with or without compressed instructions and is independent of the kernel CONFIG_RISCV_ISA_C option value. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
- 31 Mar, 2020 11 commits
-
-
Atish Patra authored
This patch enable support for cpu hotplug in RISC-V. It uses SBI HSM extension to online/offline any hart. As a result, the harts are returned to firmware once they are offline. If the harts are brought online afterwards, they re-enter Linux kernel as if a secondary hart booted for the first time. All booting requirements are honored during this process. Tested both on QEMU and HighFive Unleashed board with. Test result follows. --------------------------------------------------- Offline cpu 2 --------------------------------------------------- $ echo 0 > /sys/devices/system/cpu/cpu2/online [ 32.828684] CPU2: off $ cat /proc/cpuinfo processor : 0 hart : 0 isa : rv64imafdcsu mmu : sv48 processor : 1 hart : 1 isa : rv64imafdcsu mmu : sv48 processor : 3 hart : 3 isa : rv64imafdcsu mmu : sv48 processor : 4 hart : 4 isa : rv64imafdcsu mmu : sv48 processor : 5 hart : 5 isa : rv64imafdcsu mmu : sv48 processor : 6 hart : 6 isa : rv64imafdcsu mmu : sv48 processor : 7 hart : 7 isa : rv64imafdcsu mmu : sv48 --------------------------------------------------- online cpu 2 --------------------------------------------------- $ echo 1 > /sys/devices/system/cpu/cpu2/online $ cat /proc/cpuinfo processor : 0 hart : 0 isa : rv64imafdcsu mmu : sv48 processor : 1 hart : 1 isa : rv64imafdcsu mmu : sv48 processor : 2 hart : 2 isa : rv64imafdcsu mmu : sv48 processor : 3 hart : 3 isa : rv64imafdcsu mmu : sv48 processor : 4 hart : 4 isa : rv64imafdcsu mmu : sv48 processor : 5 hart : 5 isa : rv64imafdcsu mmu : sv48 processor : 6 hart : 6 isa : rv64imafdcsu mmu : sv48 processor : 7 hart : 7 isa : rv64imafdcsu mmu : sv48 Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org>
-
Atish Patra authored
Currently, all harts have to jump Linux in RISC-V. This complicates the multi-stage boot process as every transient stage also has to ensure all harts enter to that stage and jump to Linux afterwards. It also obstructs a clean Kexec implementation. SBI HSM extension provides alternate solutions where only a single hart need to boot and enter Linux. The booting hart can bring up secondary harts one by one afterwards. Add SBI HSM based cpu_ops that implements an ordered booting method in RISC-V. This change is also backward compatible with older firmware not implementing HSM extension. If a latest kernel is used with older firmware, it will continue to use the default spinning booting method. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Atish Patra authored
SBI specification defines HSM extension that allows to start/stop a hart by a supervisor anytime. The specification is available at https://github.com/riscv/riscv-sbi-doc/blob/master/riscv-sbi.adoc Add those definitions here. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Atish Patra authored
All SBI related extensions will not be implemented in sbi.c to avoid bloating. Thus, sbi_err_map_linux_errno() will be used in other files implementing that specific extension. Export the function so that it can be used later. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Atish Patra authored
Currently, all non-booting harts start booting after the booting hart updates the per-hart stack pointer. This is done in a way that, it's difficult to implement any other booting method without breaking the backward compatibility. Define a cpu_ops method that allows to introduce other booting methods in future. Modify the current booting method to be compatible with cpu_ops. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Atish Patra authored
The secondary hart booting and relocation code are under .init section. As a result, it will be freed once kernel booting is done. However, ordered booting protocol and CPU hotplug always requires these functions to be present to bringup harts after initial kernel boot. Move the required functions to a different section and make sure that they are in memory within first 2MB offset as trampoline page directory only maps first 2MB. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Atish Patra authored
Few v0.1 SBI calls are being replaced by new SBI calls that follows v0.2 calling convention. Implement the replacement extensions and few additional new SBI function calls that makes way for a better SBI interface in future. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Atish Patra authored
We now have SBI v0.2 which is more scalable and extendable to handle future needs for RISC-V supervisor interfaces. Introduce a new config and move all SBI v0.1 code under that config. This allows to implement the new replacement SBI extensions cleanly and remove v0.1 extensions easily in future. Currently, the config is enabled by default. Once all M-mode software, with v0.1, is no longer in use, this config option and all relevant code can be easily removed. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Atish Patra authored
Few v0.1 SBI calls are being replaced by new SBI calls that follows v0.2 calling convention. This patch just defines these new extensions. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Atish Patra authored
The SBI v0.2 introduces a base extension which is backward compatible with v0.1. Implement all helper functions and minimum required SBI calls from v0.2 for now. All other base extension function will be added later as per need. As v0.2 calling convention is backward compatible with v0.1, remove the v0.1 helper functions and just use v0.2 calling convention. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Atish Patra authored
As per the new SBI specification, current SBI implementation version is defined as 0.1 and will be removed/replaced in future. Each of the function call in 0.1 is defined as a separate extension which makes easier to replace them one at a time. Rename existing implementation to reflect that. This patch is just a preparatory patch for SBI v0.2 and doesn't introduce any functional changes. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
- 26 Mar, 2020 11 commits
-
-
Zong Li authored
The KERN_VIRT_START defines the start virtual address of kernel space. Use this macro instead of magic number. Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Zong Li authored
In a similar manner to arm64, x86, powerpc, etc., it can traverse all page tables, and dump the page table layout with the memory types and permissions. Add a debugfs file at /sys/kernel/debug/kernel_page_tables to export the page table layout to userspace. Signed-off-by: Zong Li <zong.li@sifive.com> Tested-by: Alexandre Ghiti <alex@ghiti.fr> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Zong Li authored
On strict kernel memory permission, the ftrace have to change the permission of text for dynamic patching the intructions. Use riscv_patch_text_nosync() to patch code instead of probe_kernel_write. Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Zong Li authored
On strict kernel memory permission, we couldn't patch code without writable permission. Preserve two holes in fixmap area, so we can map the kernel code temporarily to fixmap area, then patch the instructions. We need two pages here because we support the compressed instruction, so the instruction might be align to 2 bytes. When patching the 32-bit length instruction which is 2 bytes alignment, it will across two pages. Introduce two interfaces to patch kernel code: riscv_patch_text_nosync: - patch code without synchronization, it's caller's responsibility to synchronize all CPUs if needed. riscv_patch_text: - patch code and always synchronize with stop_machine() Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Zong Li authored
Extract the calculation of instruction length for common use. Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Zong Li authored
The commit contains that make text section as non-writable, rodata section as read-only, and data section as non-executable. The init section should be changed to non-executable. Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Zong Li authored
The kernel mapping will tried to optimize its mapping by using bigger size. In rv64, it tries to use PMD_SIZE, and tryies to use PGDIR_SIZE in rv32. To ensure that the start address of these sections could fit the mapping entry size, make them align to the biggest alignment. Define a macro SECTION_ALIGN because the HPAGE_SIZE or PMD_SIZE, etc., are invisible in linker script. This patch is prepared for STRICT_KERNEL_RWX support. Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Zong Li authored
Move EXCEPTION_TABLE immediately after RO_DATA. Make it easy to set the attribution of the sections which should be read-only at a time. Add _data to specify the start of data section with write permission. This patch is prepared for STRICT_KERNEL_RWX support. Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Zong Li authored
ARCH_SUPPORTS_DEBUG_PAGEALLOC provides a hook to map and unmap pages for debugging purposes. Implement the __kernel_map_pages functions to fill the poison pattern. Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Zong Li authored
Add set_direct_map_*() functions for setting the direct map alias for the page to its default permissions and to an invalid state that cannot be cached in a TLB. (See d253ca0c ("x86/mm/cpa: Add set_direct_map_*() functions")) Add a similar implementation for RISC-V. Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Zong Li authored
Add set_memory_ro/rw/x/nx architecture hooks to change the page attribution. Use own set_memory.h rather than generic set_memory.h (i.e. include/asm-generic/set_memory.h), because we want to add other function prototypes here. Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
- 06 Mar, 2020 1 commit
-
-
Atish Patra authored
If both CONFIG_KASAN and CONFIG_SPARSEMEM_VMEMMAP are set, we get the following compilation error. --------------------------------------------------------------- ./arch/riscv/include/asm/pgtable-64.h: In function ‘pud_page’: ./include/asm-generic/memory_model.h:54:29: error: ‘vmemmap’ undeclared (first use in this function); did you mean ‘mem_map’? #define __pfn_to_page(pfn) (vmemmap + (pfn)) ^~~~~~~ ./include/asm-generic/memory_model.h:82:21: note: in expansion of macro ‘__pfn_to_page’ #define pfn_to_page __pfn_to_page ^~~~~~~~~~~~~ ./arch/riscv/include/asm/pgtable-64.h:70:9: note: in expansion of macro ‘pfn_to_page’ return pfn_to_page(pud_val(pud) >> _PAGE_PFN_SHIFT); --------------------------------------------------------------- Fix the compliation errors by moving all the address space definition macros before including pgtable-64.h. Fixes: 8ad8b727 (riscv: Add KASAN support) Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
- 05 Mar, 2020 1 commit
-
-
Alexandre Ghiti authored
The newly introduced p*d_leaf macros allow to check if an entry of the page table map to a physical page instead of the next level. To avoid duplication of code, use those macros to determine if a page table entry points to a hugepage. Suggested-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
- 03 Mar, 2020 7 commits
-
-
Palmer Dabbelt authored
LLVM's integrated assembler doesn't support the LOCAL directive, which we're using when generating our uaccess fixup tables. Luckily the table fragment is small enough that there's only one internal symbol, so using a relative symbol reference doesn't really complicate anything. Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Palmer Dabbelt authored
These are only used once, and when reading the code I've always found them to be more of a headache than a benefit. While they were never worth removing before, LLVM's integrated assembler doesn't support LOCAL so rather that trying to figure out how to refactor the macros it seems saner to just inline them. Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Palmer Dabbelt authored
GCC allows users to hint to the register allocation that a variable should be placed in a register by using a syntax along the lines of function(...) { register long in_REG __asm__("REG"); } We've abused this a bit throughout the RISC-V port to access fixed registers directly as C variables. In practice it's never going to blow up because GCC isn't going to allocate these registers, but it's not a well defined syntax so we really shouldn't be relying upon this. Luckily there is a very similar but well defined syntax that allows us to still access these registers directly as C variables, which is to simply declare the register variables globally. For fixed variables this doesn't change the ABI. LLVM disallows this ambiguous syntax, so this isn't just strictly a formatting change. Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Palmer Dabbelt authored
I don't know why we were doing this, as it's been there since the beginning. After d841f729e655 ("riscv: force hart_lottery to put in .sdata section") my guess would be that it made the kernel boot and we forgot to fix it more cleanly. The default .bss segment already contains the .sbss section, so we don't need to do anything additional to ensure the symbols in .sbss continue to work. Tested-by: Zong Li <zong.li@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Zong Li authored
In PIC code model, the zero initialized data always be put in .bss section, so when building kernel as PIE, the hart_lottery won't present in small data section, and it causes more than one harts to get the lottery, because the main hart clears the content of .bss section immediately after it getting the lottery. Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> [Palmer: added a comment] Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Deepa Dinamani authored
According to init/Kconfig: "sys_sysfs is an obsolete system call no longer supported in libc. Note that disabling this option is more secure but might break compatibility with some systems." This syscall is not required for new architectures. Since the config defaults to 'y'. Set this to 'n' exlicitly. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Guo Ren authored
The only call path is: __access_remote_vm -> copy_to_user_page -> flush_icache_user_range Seems it's ok to use flush_icache_mm instead of flush_icache_all and it could reduce flush_icache_all called on other harts. Signed-off-by: Guo Ren <guoren@linux.alibaba.com> [Palmer: git-am wouldn't apply the patch, I did so manually] Fixes: 08f051ed ("RISC-V: Flush I$ when making a dirty page executable") Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
- 01 Mar, 2020 5 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Two more bug fixes (including a regression) for 5.6" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: potential crash on allocation error in ext4_alloc_flex_bg_array() jbd2: fix data races at struct journal_head
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "More bugfixes, including a few remaining "make W=1" issues such as too large frame sizes on some configurations. On the ARM side, the compiler was messing up shadow stacks between EL1 and EL2 code, which is easily fixed with __always_inline" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: VMX: check descriptor table exits on instruction emulation kvm: x86: Limit the number of "kvm: disabled by bios" messages KVM: x86: avoid useless copy of cpufreq policy KVM: allow disabling -Werror KVM: x86: allow compiling as non-module with W=1 KVM: Pre-allocate 1 cpumask variable per cpu for both pv tlb and pv ipis KVM: Introduce pv check helpers KVM: let declaration of kvm_get_running_vcpus match implementation KVM: SVM: allocate AVIC data structures based on kvm_amd module parameter arm64: Ask the compiler to __always_inline functions used by KVM at HYP KVM: arm64: Define our own swab32() to avoid a uapi static inline KVM: arm64: Ask the compiler to __always_inline functions used at HYP kvm: arm/arm64: Fold VHE entry/exit work into kvm_vcpu_run_vhe() KVM: arm/arm64: Fix up includes for trace.h
-
Oliver Upton authored
KVM emulates UMIP on hardware that doesn't support it by setting the 'descriptor table exiting' VM-execution control and performing instruction emulation. When running nested, this emulation is broken as KVM refuses to emulate L2 instructions by default. Correct this regression by allowing the emulation of descriptor table instructions if L1 hasn't requested 'descriptor table exiting'. Fixes: 07721fee ("KVM: nVMX: Don't emulate instructions in guest mode") Reported-by: Jan Kiszka <jan.kiszka@web.de> Cc: stable@vger.kernel.org Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Jim Mattson <jmattson@google.com> Signed-off-by: Oliver Upton <oupton@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "I2C has three driver bugfixes for you. We agreed on the Mac regression to go in via I2C" * 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: macintosh: therm_windtunnel: fix regression when instantiating devices i2c: altera: Fix potential integer overflow i2c: jz4780: silence log flood on txabrt
-
- 29 Feb, 2020 1 commit
-
-
Dan Carpenter authored
If sbi->s_flex_groups_allocated is zero and the first allocation fails then this code will crash. The problem is that "i--" will set "i" to -1 but when we compare "i >= sbi->s_flex_groups_allocated" then the -1 is type promoted to unsigned and becomes UINT_MAX. Since UINT_MAX is more than zero, the condition is true so we call kvfree(new_groups[-1]). The loop will carry on freeing invalid memory until it crashes. Fixes: 7c990728 ("ext4: fix potential race between s_flex_groups online resizing and access") Reviewed-by: Suraj Jitindar Singh <surajjs@amazon.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@kernel.org Link: https://lore.kernel.org/r/20200228092142.7irbc44yaz3by7nb@kili.mountainSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-