- 28 Jan, 2008 40 commits
-
-
Johannes Berg authored
This makes mac80211 include the low-level MAC timestamp in the radiotap header if the driver indicated (by a new RX flag) that the timestamp is valid. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Gerrit Renker authored
The function follows48(), which is a special-case of dccp_delta_seqno(), is nowhere used in the DCCP code, thus removed by this patch. Signed-off-by:
Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by:
Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Gerrit Renker authored
This implements the changes to the nofeedback timer handling suggested in draft rfc3448bis00, section 4.4. In particular, these changes mean: * better handling of the lossless case (p == 0) * the timestamp for computing t_ld becomes obsolete * much more recent document (RFC 3448 is almost 5 years old) * concepts in rfc3448bis arose from a real, working implementation (cf. sec. 12) Signed-off-by:
-
Gerrit Renker authored
This implements the algorithm to update the allowed sending rate X upon receiving feedback packets, as described in draft rfc3448bis, 4.2/4.3. Signed-off-by:
-
Gerrit Renker authored
* the NO_SENT state is only triggered in bidirectional mode, costing unnecessary processing. * the TERM (terminating) state is irrelevant. Signed-off-by:
-
Gerrit Renker authored
This patch 1) concentrates previously scattered computation of p_inv into one function; 2) removes the `p' element of the CCID3 RX sock (it is redundant); 3) makes the tfrc_rx_info structure standalone, only used on demand. Signed-off-by:
-
Joe Perches authored
Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Vlad Yasevich authored
The crc32c library used an identical table and algorithm as SCTP. Switch to using the library instead of carrying our own table. Using crypto layer proved to have too much overhead compared to using the library directly. Signed-off-by:
Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by:
-
Herbert Xu authored
The seq_open_net patch changed the meaning of seq->private. Unfortunately it missed two spots in AF_PACKET, which still used the old way of dereferencing seq->private, thus causing weird and wonderful crashes when reading /proc/net/packet. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Change IPV4 specific macros LOOPBACK MULTICAST LOCAL_MCAST BADCLASS and ZERONET macros to inline functions ipv4_is_<type>(__be32 addr) Adds type safety and arguably some readability. Changes since last submission: Removed ipv4_addr_octets function Used hex constants Converted recently added rfc3330 macros Signed-off-by:
-
Pavel Emelyanov authored
These are scattered over the code, but almost all the "critical" places already have the proper struct net at hand except for snmp proc showing function and routing rtnl handler. Signed-off-by:
Pavel Emelyanov <xemul@openvz.org> Signed-off-by:
-
Pavel Emelyanov authored
They are all collected in the net/ipv4/devinet.c file and mostly use the IPV4_DEVCONF_DFLT macro. So I add the net parameter to it and patch users accordingly. Signed-off-by:
-
Pavel Emelyanov authored
This is the core. Add all and default pointers on the netns_ipv4 and register a new pernet subsys to initialize them. Also add the ctl_table_header to register the net.ipv4.ip_forward ctl. I don't allocate additional memory for init_net, but use global devinets. Signed-off-by:
-
Pavel Emelyanov authored
Some handers and strategies of devinet sysctl tables need to know the net to propagate the ctl change to all the net devices. I use the (currently unused) extra2 pointer on the tables to get it. Holding the reference on the struct net is not possible, because otherwise we'll get a net->ctl_table->net circular dependency. But since the ctl tables are unregistered during the net destruction, this is safe to get it w/o additional protection. Signed-off-by:
-
Pavel Emelyanov authored
This one will need to set the IPV4_DEVCONF_ALL(PROXY_ARP), but there's no ways to get the net right in place, so we have to pull one from the inet_ioctl's struct sock. Signed-off-by:
-
Pavel Emelyanov authored
Currently, this function is void, so failures in creating sysctls for new/renamed devices are not reported to anywhere. Fixing this is another complex (needed?) task, but this return value is needed during the namespaces creation to handle the case, when we failed to create "all" and "default" entries. Signed-off-by:
-
Pavel Emelyanov authored
The ipv4 will store its parameters inside this structure. This one is empty now, but it will be eventually filled. Signed-off-by:
-
Pavel Emelyanov authored
The _find calls calculate the hash value using the xfrm_state_hmask, without the xfrm_state_lock. But the value of this mask can change in the _resize call under the state_lock, so we risk to fail in finding the desired entry in hash. I think, that the hash value is better to calculate under the state lock. Signed-off-by:
-
Matthias Kaehlcke authored
PPP synchronous tty channel driver: convert the semaphore dead_sem to a completion Signed-off-by:
Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Herbert Xu authored
Now that external users may increment the counters directly, we need to ensure that udp_stats_in6 is always available. Otherwise we'd either have to requrie the external users to be built as modules or ipv6 to be built-in. This isn't too bad because udp_stats_in6 is just a pair of pointers plus an EXPORT, e.g., just 40 (16 + 24) bytes on x86-64. Signed-off-by:
-
YOSHIFUJI Hideaki authored
Signed-off-by:
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
YOSHIFUJI Hideaki authored
Signed-off-by:
-
YOSHIFUJI Hideaki authored
Signed-off-by:
-
YOSHIFUJI Hideaki authored
Signed-off-by:
-
YOSHIFUJI Hideaki authored
Signed-off-by:
-
YOSHIFUJI Hideaki authored
Signed-off-by:
-
YOSHIFUJI Hideaki authored
Signed-off-by:
-
YOSHIFUJI Hideaki authored
Signed-off-by:
-
Gerrit Renker authored
This introduces a CCMPS field for setting a CCID-specific upper bound on the application payload size, as is defined in RFC 4340, section 14. Only the TX CCID is considered in setting this limit, since the RX CCID generates comparatively small (DCCP-Ack) feedback packets. The CCMPS field includes network and transport layer header lengths. The only current CCMPS customer is CCID4 (via RFC 4828). A wrapper is used to allow querying the CCMPS even at times where the CCID modules may not have been fully negotiated yet. In dccp_sync_mss() the variable `mss_now' has been renamed into `cur_mps', to reflect that we are dealing with an MPS, but not an MSS. Since the DCCP code closely follows the TCP code, the identifiers `dccp_sync_mss' and `dccps_mss_cache' have been kept, as they have direct TCP counterparts. Signed-off-by:
-
Gerrit Renker authored
The patch makes the registration messages of CCID 2/3 a bit more informative: instead of repeating the CCID number as currently done, "CCID: Registered CCID 2 (ccid2)" or "CCID: Registered CCID 3 (ccid3)", the descriptive names of the CCID's (from RFCs) are now used: "CCID: Registered CCID 2 (TCP-like)" and "CCID: Registered CCID 3 (TCP-Friendly Rate Control)". To allow spaces in the name, the slab name string has been changed to refer to the numeric CCID identifier, using the same format as before. Signed-off-by: -
Gerrit Renker authored
This adds documentation for the ccid_operations structure. Signed-off-by:
-
Denis V. Lunev authored
There are several thresholds for trie fib hash management. They are used in the code as a constants. Make them constants from the compiler point of view. Signed-off-by:
Denis V. Lunev <den@openvz.org> Signed-off-by:
-
Michal Schmidt authored
This is similar to the change already done for IPIP tunnels. Once created, a SIT tunnel can't be bound to another device. To reproduce: # create a tunnel: ip tunnel add tunneltest0 mode sit remote 10.0.0.1 dev eth0 # try to change the bounding device from eth0 to eth1: ip tunnel change tunneltest0 dev eth1 # show the result: ip tunnel show tunneltest0 tunneltest0: ipv6/ip remote 10.0.0.1 local any dev eth0 ttl inherit Notice the bound device has not changed from eth0 to eth1. This patch fixes it. When changing the binding, it also recalculates the MTU according to the new bound device's MTU. Signed-off-by:
Michal Schmidt <mschmidt@redhat.com> Signed-off-by:
-
