- 31 Jan, 2017 12 commits
-
-
Kees Cook authored
Prepare to mark sensitive kernel structures for randomization by making sure they're using designated initializers. These were identified during allyesconfig builds of x86, arm, and arm64, with most initializer fixes extracted from grsecurity. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Kees Cook authored
Prepare to mark sensitive kernel structures for randomization by making sure they're using designated initializers. These were identified during allyesconfig builds of x86, arm, and arm64, with most initializer fixes extracted from grsecurity. Signed-off-by:
-
Sudip Mukherjee authored
If dvb_attach() fails then we were just printing an error message and exiting but the memory allocated to state was not released. Signed-off-by:
Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by:
-
Sean Young authored
tx-only RC devices do not have a receive buffer. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Sean Young authored
LIRC_SET_REC_TIMEOUT can fail if the value returned by LIRC_GET_MIN_TIMEOUT is set due to rounding errors. Signed-off-by:
-
Sean Young authored
The current message has some wanted spaces on it: rc_core: Loaded IR protocol module ir-jvc-decoder, but protocol jvc still not available Merge it into a single line. Signed-off-by:
-
Sean Young authored
An RC device which is transmit-only shouldn't have the LIRC_CAN_REC_MODE2 feature. Signed-off-by:
-
Martin Blumenstingl authored
The GeekBox ships with a 12 button remote control which seems to use the NEC protocol. The button keycodes were captured with the "ir-keytable" tool (ir-keytable -p $PROTOCOL -t; human_button_pusher). Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Sean Wang authored
This patch adds documentation for devicetree bindings for consumer Mediatek IR controller. Signed-off-by:
Sean Wang <sean.wang@mediatek.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Sean Wang authored
Most IR drivers uses the same label to identify the scancode/key table they used by multiple bindings and lack explanation well. So move the shared property into a common place and give better explanation. Signed-off-by:
-
Sean Wang authored
This patch adds driver for IR controller on MT7623 SoC. and should also work on similar Mediatek SoC. Currently testing successfully on NEC and SONY remote controller only but it should work on others (lirc, rc-5 and rc-6). Signed-off-by:
-
Sean Young authored
As reported by kernel build test: In file included from arch/arm/mach-omap2/pdata-quirks.c:15:0: >> arch/arm/mach-omap2/pdata-quirks.c:536:49: error: 'rx51_lirc_data' undeclared here (not in a function) OF_DEV_AUXDATA("nokia,n900-ir", 0, "n900-ir", &rx51_lirc_data), ^ include/linux/of_platform.h:52:21: note: in definition of macro 'OF_DEV_AUXDATA' .platform_data = _pdata } ^~~~~~ Since "a92def1b [media] ir-rx51: port to rc-core" the build fails on some arm configurations. Reported-by:kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
- 30 Jan, 2017 28 commits
-
-
Scott Matheina authored
Fixed checkpatch check blank line before closing brace '}' Signed-off-by:
Scott Matheina <scott@matheina.com> Signed-off-by:
-
Scott Matheina authored
Fixed Checkpatch check "Alignment should match open parenthesis" Signed-off-by:
-
Baruch Siach authored
Simplifies return value logic of adv7170_set_fmt(). Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
-
Baruch Siach authored
The loop over the ov2659_formats[] array just a few lines above verifies that mf->code matches the selected array entry. Signed-off-by:
-
Colin Ian King authored
trivial fix to spelling mistake in err message Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
trivial fix to spelling mistake in deb_chk message Signed-off-by:
-
Colin Ian King authored
trivial fix to spelling mistake in cobalt_info message. Anders Celsius was the Swedish astronomer. Signed-off-by:
-
Colin Ian King authored
trivial fix to spelling mistake of function name in err message, should be cx24123_pll_calculate instead of cx24123_pll_calcutate. Signed-off-by:
-
Nicolas Iooss authored
In vpfe_s_fmt(), when the sensor format and the requested format were the same, bpp was assigned to vpfe->bpp without being initialized first. Grab the bpp value that is currently used by using __vpfe_get_format() instead of its wrapper, vpfe_try_fmt(). This use of uninitialized variable has been found by compiling the kernel with clang. Fixes: 417d2e50 ("[media] media: platform: add VPFE capture driver support for AM437X") Cc: stable@vger.kernel.org Signed-off-by:
Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by:
-
Hans Verkuil authored
Document the EIO error since this can happen anywhere anytime and applications should be aware of this. Also fix typo: exaustive -> exhaustive Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Soren Brinkmann authored
Add 3840x2160 as valid resolution for the webcam capture input and adjust the webcam intervals accordingly. Signed-off-by:
Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by:
-
Corentin Labbe authored
Commit d78c16cc ("ARM: SAMSUNG: Remove remaining legacy code") removed the Kconfig symbol PLAT_S5P. This patch remove the last occurrence of this symbol. Signed-off-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by:
-
Corentin Labbe authored
s5p-cec: does not use any miscdevice so this patch remove this unnecessary inclusion. Signed-off-by:
-
Lars-Peter Clausen authored
The adv7604 driver platform data contains fields for configuring the drive strength of the output pins. When probing the driver through DT these fields are not explicitly initialized, which means they are left at 0. This is a reserved setting for the drive strength configuration though and can cause signal integrity issues. Whether these signal integrity issues are visible depends on the PCB specifics (e.g. the higher the load capacitance for the output the more visible the issue). But it has been observed on existing solutions at high pixel clock rates. Initialize the drive strength settings to the power-on-reset value of the device when probing through devicetree to avoid this issue. Fixes: 0e158be0162b ("adv7604: Add DT support") Signed-off-by:Lars-Peter Clausen <lars@metafoo.de> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
-
Bhumika Goyal authored
v4l2_subdev_{core/video}_ops structures are stored in the fields of the v4l2_subdev_ops structure which are of type const. Also, v4l2_subdev_ops structure is passed to a function having its argument of type const. As these structures are never modified, so declare them as const. Done using Coccinelle:(One of the scripts) @r1 disable optional_qualifier @ identifier i; position p; @@ static struct v4l2_subdev_core_ops i@p = {...}; @ok1@ identifier r1.i; position p; struct v4l2_subdev_ops obj; @@ obj.core=&i@p; @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct v4l2_subdev_core_ops i; File size before: text data bss dec hex filename 858 576 0 1434 59a soc_camera/soc_camera_platform.o File size after: text data bss dec hex filename 1234 192 0 1426 592 soc_camera/soc_camera_platform.o Signed-off-by:Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Christophe JAILLET authored
If 'ov9640_reg_read()' does not return 0, then 'val' is left unmodified. As it is not initialized either, the return value can be anything. It is likely that returning the error code was expected here. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Sean Young authored
The staging lirc_imon driver contains 4 usb ids. Two of those have a VFD and two don't. The VFD code is exactly the same in the mainline imon driver, so that part is easily ported. The staging driver produces raw IR rather than scancodes for the four devices, so I've ported the raw IR code from staging to mainline imon. Now that mainline imon can handle these four devices, lirc_imon is no longer needed. Compile tested only. Signed-off-by:
-
Sean Young authored
This driver is for an old mach64 VT board, which also has a framebuffer driver (atyfb) and userspace mach64 X driver. It was merged in 2010 and noone has attempted to port it to rc-core, which would be necessary to get it out of staging. I have not been able to track down the hardware either. Signed-off-by:
-
Sean Young authored
The lirc_parallel driver was merged in 2010 and noone has attempted to do the work necessary to get it out of staging (i.e. port it to rc-core). I have not been able to find one of these devices, and a machine with a parallel port is pretty rare too. Signed-off-by:
-
Sean Young authored
Before this driver can be moved out of staging, it should be ported to rc-core. I've tried to make the minimum changes possible without upsetting checkpatch. Compile tested only. Signed-off-by:
-
Sean Young authored
This driver was written using lirc since rc-core did not support transmitter-only hardware at that time. Now that it does, port this driver. Compile tested only. Signed-off-by:
-
Andi Shyti authored
The ir-spi is a simple device driver which supports the connection between an IR LED and the MOSI line of an SPI device. The driver, indeed, uses the SPI framework to stream the raw data provided by userspace through an rc character device. The chardev is handled by the LIRC framework and its functionality basically provides: - write: the driver gets a pulse/space signal and translates it to a binary signal that will be streamed to the IR led through the SPI framework. - set frequency: sets the frequency whith which the data should be sent. This is handle with ioctl with the LIRC_SET_SEND_CARRIER flag (as per lirc documentation) - set duty cycle: this is also handled with ioctl with the LIRC_SET_SEND_DUTY_CYCLE flag. The driver handles duty cycles of 50%, 60%, 70%, 75%, 80% and 90%, calculated on 16bit data. The character device is created under /dev/lircX name, where X is and ID assigned by the LIRC framework. Example of usage: fd = open("/dev/lirc0", O_RDWR); if (fd < 0) return -1; val = 608000; ret = ioctl(fd, LIRC_SET_SEND_CARRIER, &val); if (ret < 0) return -1; val = 60; ret = ioctl(fd, LIRC_SET_SEND_DUTY_CYCLE, &val); if (ret < 0) return -1; n = write(fd, buffer, BUF_LEN); if (n < 0 || n != BUF_LEN) ret = -1; close(fd); Signed-off-by:Andi Shyti <andi.shyti@samsung.com> Signed-off-by:
-
Andi Shyti authored
Document the ir-spi driver's binding which is a IR led driven through the SPI line. Signed-off-by:
-
Andi Shyti authored
Raw IR transmitters do not need any thread listening for occurring events. Check the driver type before running the thread. Signed-off-by:
-
Andi Shyti authored
IR raw transmitter driver type is specified in the enum rc_driver_type as RC_DRIVER_IR_RAW_TX which includes all those devices that transmit raw stream of bit to a receiver. The data are provided by userspace applications, therefore they don't need any input device allocation, but still they need to be registered as raw devices. Suggested-by:
-
Andi Shyti authored
Move the input device allocation, map and protocol handling to different functions. Signed-off-by:
-
Andi Shyti authored
The driver type can be assigned immediately when an RC device requests to the framework to allocate the device. This is an 'enum rc_driver_type' data type and specifies whether the device is a raw receiver or scancode receiver. The type will be given as parameter to the rc_allocate_device device. Change accordingly all the drivers calling rc_allocate_device() so that the device type is specified during the rc device allocation. Whenever the device type is not specified, it will be set as RC_DRIVER_SCANCODE which was the default '0' value. Suggested-by:
-
Antti Seppälä authored
Nuvoton-cir utilizes the encoding capabilities of rc-core to convert scancodes from user space to pulse/space format understood by the underlying hardware. Converted samples are then written to the wakeup fifo along with other necessary configuration to enable wake up functionality. Signed-off-by:
Antti Seppälä <a.seppala@gmail.com> Signed-off-by:
James Hogan <james@albanarts.com> Signed-off-by:
-
