- 20 Jan, 2014 1 commit
-
-
Frank Praznik authored
Retrieve and cache the output report for the Dualshock 4 in sony_probe() instead of repeatedly walking the report list in the worker function. Signed-off-by:
Frank Praznik <frank.praznik@oh.rr.com> Reviewed-by:
David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
- 17 Jan, 2014 4 commits
-
-
Frank Praznik authored
Use a modified HID descriptor for the Dualshock 4 to assign the gyroscope sensors and accelerometers to axes. Signed-off-by:
-
Frank Praznik authored
Fix cosmetic spacing in the device definitions. Signed-off-by:
-
Frank Praznik authored
Use regular HID output reports instead of raw reports in the dualshock4_state_worker function. (Thanks Simon Mungewell) Signed-off-by:
-
Frank Praznik authored
Use separate identifiers for Dualshock 4 controllers connected via USB and Bluetooth. Signed-off-by:
-
- 16 Jan, 2014 3 commits
-
-
Frank Praznik authored
Rename sony_state_worker to sixaxis_state_worker since the function is now sixaxis specific. Signed-off-by:
-
Frank Praznik authored
Add LED lightbar controls for the Dualshock 4. The Dualshock 4 light bar has 3 separate RGB LEDs that can range in brightness from 0 to 255 so a full byte is now needed to store each LED's state Changed the module to support an arbitrary number of LEDs instead of being hardcoded to 4. Signed-off-by:
-
Frank Praznik authored
Adds the Dualshock 4 to the HID device list and enables force-feedback. Adds a Dualshock 4 specific worker function since the Dualshock 4 needs a different report than the Sixaxis. The right motor in the Dualshock 4 is variable so the full rumble value is now passed to the worker function and clamped there if necessary. Signed-off-by:
-
- 02 Jan, 2014 1 commit
-
-
Julia Lawall authored
Currently the return variable ret is always 0. Set it to other values in error cases, as used in the direct return. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
- 20 Nov, 2013 5 commits
-
-
Sven Eckelmann authored
The PS3 Sixaxis controller has 4 LEDs which can be controlled using the same command as the rumble functionality. It seems not to be possible to only change the LED without modifying the rumble motor state. Thus both have to be stored on the host and retransmitted when either the LED or rumble state is changed. Third party controllers may not support to disable all LEDs at once. These controllers automatically switch to blinking of all LEDs when no LED is active anymore. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Tested-by:
Simon Wood <simon@mungewell.org> Signed-off-by:
-
Sven Eckelmann authored
It is not necessary to keep the LED information in an extra struct which is only used by the Buzz device. It can also be used by other devices. Signed-off-by:
-
Sven Eckelmann authored
More controllers managed by the hid-sony module have 4 LEDs. These can share most of the functionality provided by the buzz functions. Signed-off-by:
-
Sven Eckelmann authored
Signed-off-by:
-
Sven Eckelmann authored
The commands used to modify the rumble motor state also modifies the LEDs at the same time. The functionality used to modify this state in the driver has to be shared between the rumble and LED part. It is therefore better to replace the "rumble" part of the names with "state". Signed-off-by:
-
- 19 Nov, 2013 2 commits
-
-
Jiri Kosina authored
This reverts commit 86b84167 as it introduced a VID/PID conflict with its original owner: hid-wiimote got hid:b0005g*v0000054Cp00000306 added but hid-sony already has this id for the PS3 Remote (and the ID is oficically assigned to Sony). Revert the commit to avoid hid-sony regression. David is working on a bluez patch to force proper ID on the wiimote. Reported-by:
Michel Kraus <mksolpa@gmail.com> Signed-off-by:
-
Sven Eckelmann authored
The ff_memless has a timer running which gets run in an atomic context and calls the play_effect callback. The callback function for sony uses the hid_output_raw_report (overwritten by sixaxis_usb_output_raw_report) function to handle differences in the control message format. It is not safe for an atomic context because it may sleep later in usb_start_wait_urb. This "scheduling while atomic" can cause the system to lock up. A workaround is to make the force feedback state update using work_queues and use the play_effect function only to enqueue the work item. Reported-by:
-
- 16 Nov, 2013 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID updates from Jiri Kosina: - i2c-hid is not querying init reports any more, as it's not mandated by the spec, and annoys quite a few devices during enumeration, by Bibek Basu - a lot of fixes for Logitech devices, by Simon Wood - hid-apple now has an option to switch between Option and Command mode, by Nanno Langstraat - Some more workarounds for severely broken ELO devices, by Oliver Neukum - more devm conversions, by Benjamin Tissoires - wiimote correctness fixes, by David Herrmann - a lot of added support for various new device IDs and random small fixes here and there" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (34 commits) HID: enable Mayflash USB Gamecube Adapter HID: sony: Add force feedback support for Dualshock3 USB Input: usbtouchscreen: ignore eGalax/D-Wav/EETI HIDs HID: don't ignore eGalax/D-Wav/EETI HIDs HID: roccat: add missing special driver declarations HID:hid-lg4ff: Correct Auto-center strength for wheels other than MOMO and MOMO2 HID:hid-lg4ff: Initialize device properties before we touch autocentering. HID:hid-lg4ff: ensure ConstantForce is disabled when set to 0 HID:hid-lg4ff: Switch autocentering off when strength is set to zero. HID:hid-lg4ff: Scale autocentering force properly on Logitech wheel HID: roccat: fix Coverity CID 141438 HID: multitouch: add manufacturer to Kconfig help text HID: logitech-dj: small cleanup in rdcat() HID: remove self-assignment from hid_input_report HID: hid-sensor-hub: fix report size HID: i2c-hid: Stop querying for init reports HID: roccat: add support for Ryos MK keyboards HID: roccat: generalize some common code HID: roccat: add new device return value HID: wiimote: add pro-controller analog stick calibration ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivialLinus Torvalds authored
Pull trivial tree updates from Jiri Kosina: "Usual earth-shaking, news-breaking, rocket science pile from trivial.git" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits) doc: usb: Fix typo in Documentation/usb/gadget_configs.txt doc: add missing files to timers/00-INDEX timekeeping: Fix some trivial typos in comments mm: Fix some trivial typos in comments irq: Fix some trivial typos in comments NUMA: fix typos in Kconfig help text mm: update 00-INDEX doc: Documentation/DMA-attributes.txt fix typo DRM: comment: `halve' -> `half' Docs: Kconfig: `devlopers' -> `developers' doc: typo on word accounting in kprobes.c in mutliple architectures treewide: fix "usefull" typo treewide: fix "distingush" typo mm/Kconfig: Grammar s/an/a/ kexec: Typo s/the/then/ Documentation/kvm: Update cpuid documentation for steal time and pv eoi treewide: Fix common typo in "identify" __page_to_pfn: Fix typo in comment Correct some typos for word frequency clk: fixed-factor: Fix a trivial typo ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input updates from Dmitry Torokhov: "Updates for the input subsystem. You will get an new drivers for Hyper-V synthetic keyboard and for Neonode zForce touchscreens, plus a bunch of driver fixes and cleanups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (49 commits) Revert "Input: ALPS - add support for model found on Dell XT2" arm: dts: am335x sk: add touchscreen support Input: ti_am335x_tsc - fix spelling mistake in TSC/ADC DT binding Input: cyttsp4 - replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO Input: mma8450 - add missing i2c_set_clientdata() in mma8450_probe() Input: mpu3050 - add missing i2c_set_clientdata() in mpu3050_probe() Input: tnetv107x-keypad - make irqs signed for error handling Input: add driver for Neonode zForce based touchscreens Input: sh_keysc - enable the driver on all ARM platforms Input: remove a redundant max() call Input: mousedev - allow disabling even without CONFIG_EXPERT Input: allow deselecting serio drivers even without CONFIG_EXPERT Input: i8042 - add PNP modaliases Input: evdev - fall back to vmalloc for client event buffer Input: cypress_ps2 - do not consider data bad if palm is detected Input: cypress_ps2 - remove useless cast Input: fix PWM-related undefined reference errors Input: ALPS - change secondary device's name Input: wacom - not all multi-interface devices support touch Input: nspire-keypad - add missing clk_disable_unprepare() on error path ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-nextLinus Torvalds authored
Pull MFD updates from Samuel Ortiz: "For the 3.13 merge window we have a couple of new drivers for the AMS AS3722 PMIC and for STMicroelectronics STw481x PMIC. Although this is a smaller update than usual, we also have: - Device tree support for the max77693 driver - linux/of.h inclusion for all DT compatible MFD drivers, to avoid build breakage in the future - Support for Intel Wildcat Point-LP PCH through the lpc_ich driver - A small arizona update for new wm5110 DSP registers and a few fixes - A small palmas update as well, including an of_device table addition and a few minor fixes - Two small mfd-core changes, one including a memory leak fix for when mfd_add_device() fails - Our usual round of minor cleanups and janitorial fixes" * tag 'mfd-3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (63 commits) Documentation: mfd: Update s2mps11.txt mfd: pm8921: Potential NULL dereference in pm8921_remove() mfd: Fix memory leak in mfd_add_devices() mfd: Stop setting refcounting pointers in original mfd_cell arrays mfd: wm5110: Enable micd clamp functionality mfd: lpc_ich: Add Device IDs for Intel Wildcat Point-LP PCH mfd: max77693: Fix up bug of wrong interrupt number mfd: as3722: Don't export the regmap config mfd: twl6040: Remove obsolete cleanup for i2c clientdata mfd: tps65910: Remove warning during dt node parsing mfd: lpc_sch: Ignore resource conflicts when adding mfd cells mfd: ti_am335x_tscadc: Avoid possible deadlock of reg_lock mfd: syscon: Return -ENOSYS if CONFIG_MFD_SYSCON is not enabled mfd: Add support for ams AS3722 PMIC mfd: max77693: Include linux/of.h header mfd: tc3589x: Detect the precise version mfd: omap-usb: prepare/unprepare clock while enable/disable mfd: max77686: Include linux/of.h header mfd: max8907: Include linux/of.h header mfd: max8997: Include linux/of.h header ... -
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/stagingLinus Torvalds authored
Pull hwmon fixes and updates from Jean Delvare: "All lm90 driver fixes and improvements" * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: Documentation: dt: hwmon: Add OF document for LM90 hwmon: (lm90) Add power control hwmon: (lm90) Add support for TI TMP451 hwmon: (lm90) Use enums for the indexes of temp8 and temp11 hwmon: (lm90) Add support to handle IRQ hwmon: (lm90) Define status bits hwmon: (lm90) Fix max6696 alarm handling
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull second round of block driver updates from Jens Axboe: "As mentioned in the original pull request, the bcache bits were pulled because of their dependency on the immutable bio vecs. Kent re-did this part and resubmitted it, so here's the 2nd round of (mostly) driver updates for 3.13. It contains: - The bcache work from Kent. - Conversion of virtio-blk to blk-mq. This removes the bio and request path, and substitutes with the blk-mq path instead. The end result almost 200 deleted lines. Patch is acked by Asias and Christoph, who both did a bunch of testing. - A removal of bootmem.h include from Grygorii Strashko, part of a larger series of his killing the dependency on that header file. - Removal of __cpuinit from blk-mq from Paul Gortmaker" * 'for-linus' of git://git.kernel.dk/linux-block: (56 commits) virtio_blk: blk-mq support blk-mq: remove newly added instances of __cpuinit bcache: defensively handle format strings bcache: Bypass torture test bcache: Delete some slower inline asm bcache: Use ida for bcache block dev minor bcache: Fix sysfs splat on shutdown with flash only devs bcache: Better full stripe scanning bcache: Have btree_split() insert into parent directly bcache: Move spinlock into struct time_stats bcache: Kill sequential_merge option bcache: Kill bch_next_recurse_key() bcache: Avoid deadlocking in garbage collection bcache: Incremental gc bcache: Add make_btree_freeing_key() bcache: Add btree_node_write_sync() bcache: PRECEDING_KEY() bcache: bch_(btree|extent)_ptr_invalid() bcache: Don't bother with bucket refcount for btree node allocations bcache: Debug code improvements ...
-
- 15 Nov, 2013 18 commits
-
-
Jiri Kosina authored
Merge branches 'for-3.12/upstream-fixes', 'for-3.13/holtek', 'for-3.13/i2c-hid', 'for-3.13/logitech', 'for-3.13/multitouch', 'for-3.13/roccat', 'for-3.13/upstream' and 'for-3.13/wiimote' into for-linus
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm regression fix from Dave Airlie: "Forgot this one liner was necessary to fix module reload issues introduced earlier in the drm pull" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: drm: check for !kdev in drm_unplug_minor()
-
Linus Torvalds authored
Merge tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux Pull blackfin updates from Steven Miao: "Blackfin gpio changes, add adi pinctrl driver, and bug fixes" * tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux: blackfin: fix build warning for unused variable smp: bf561: and smb_wmb()/smp_rmb() at ipi send/receive pm: use GFP_ATOMIC when pm core call this function blackfin: serial: Add serial port_fer and port_mux early platform resources. blackfin: pinctrl-adi2: code cleanup after using pinctrl-adi2 blackfin: adi gpio driver and pinctrl driver support bf609: update default config for spi Blackfin: bfin_gpio: Use proper mask for comparing pfunc
-
git://git.openrisc.net/~jonas/linuxLinus Torvalds authored
Pull OpenRISC updates from Jonas Bonn: - small cleanups to make allmodconfig pass - defconfig refresh - a handful of code sanitization patches * tag 'for-3.13' of git://git.openrisc.net/~jonas/linux: openrisc: Refactor or32_early_setup() openrisc: Remove unused declaration of __initramfs_start openrisc: Use the declarations provided by <asm/sections.h> openrisc: Refresh or1ksim_defconfig for v3.12 openrisc: Refactor 16-bit constant relocation openrisc: include: asm: Kbuild: add default "vga.h" openrisc: Makefile: append "-D__linux__" to KBUILD_CFLAGS
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuildLinus Torvalds authored
Pull misc kbuild changes from Michal Marek: - make tags fixes again - scripts/show_delta fix for newer python - scripts/kernel-doc does not fail on unknown function prototype - one less coccinelle check this time * 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: scripts/tags.sh: remove obsolete __devinit[const|data] scripts/kernel-doc: make unknown function prototype a Warning instead of an Error show_delta: Update script to support python versions 2.5 through 3.3 scripts/coccinelle/api: remove devm_request_and_ioremap.cocci scripts/tags.sh: Increase identifier list
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuildLinus Torvalds authored
Pull kconfig changes from Michal Marek: - xconfig stores its setting in a meaningful path (~/.config/kernel.org/qconf.conf) - kconfig symbol search fix - documentation fixes - cleanup & comment update - fix warning when a kconfig symbol is defined with two different types - Yann is now officially listed as maintainer of kconfig, but he prefers me to send pull requests for now * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: MAINTAINERS: New kconfig maintainer xconfig: Fix the filename for GUI settings kconfig: fix bug in search results string: use strlen(gstr->s), not gstr->len kconfig: remove unused definition from scanner kconfig: adjust warning message for conflicting types kconfig: fix trivial typos and update mconf documentation kconfig: add short explanation to SYMBOL_WRITE Documentation/kbuild/kconfig.txt: 'make listnewconfig' replaces: yes "" | make oldconfig
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuildLinus Torvalds authored
Pull kbuild changes from Michal Marek: - LTO fixes, but the kallsyms part had to be reverted - Pass -Werror=implicit-int and -Werror=strict-prototypes to the compiler by default - snprintf fix in modpost - remove GREP_OPTIONS from the environment to be immune against exotic grep option settings * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kallsyms: Revert back to 128 max symbol length Kbuild: Ignore GREP_OPTIONS env variable scripts: kallsyms: Use %zu to print 'size_t' scripts/bloat-o-meter: use .startswith rather than fragile slicing scripts/bloat-o-meter: ignore changes in the size of linux_banner kbuild: replace unbounded sprintf call in modpost kbuild, bloat-o-meter: fix static detection Kbuild: Handle longer symbols in kallsyms.c kbuild: Increase kallsyms max symbol length Makefile: enable -Werror=implicit-int and -Werror=strict-prototypes by default
-
git://linux-c6x.org/git/projects/linux-c6x-upstreamingLinus Torvalds authored
Pull Kconfig cleanups from Mark Salter: "Remove some unused config options from C6X and clean up PC_PARPORT dependencies. The latter was discussed here: https://lkml.org/lkml/2013/10/8/12" * tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming: c6x: remove unused COMMON_CLKDEV Kconfig parameter Kconfig cleanup (PARPORT_PC dependencies) x86: select ARCH_MIGHT_HAVE_PC_PARPORT unicore32: select ARCH_MIGHT_HAVE_PC_PARPORT sparc: select ARCH_MIGHT_HAVE_PC_PARPORT sh: select ARCH_MIGHT_HAVE_PC_PARPORT powerpc: select ARCH_MIGHT_HAVE_PC_PARPORT parisc: select ARCH_MIGHT_HAVE_PC_PARPORT mips: select ARCH_MIGHT_HAVE_PC_PARPORT microblaze: select ARCH_MIGHT_HAVE_PC_PARPORT m68k: select ARCH_MIGHT_HAVE_PC_PARPORT ia64: select ARCH_MIGHT_HAVE_PC_PARPORT arm: select ARCH_MIGHT_HAVE_PC_PARPORT alpha: select ARCH_MIGHT_HAVE_PC_PARPORT c6x: remove unused parameter in Kconfig -
David Herrmann authored
We moved minor deallocation to drm_dev_free() in: commit 8f6599da Author: David Herrmann <dh.herrmann@gmail.com> Date: Sun Oct 20 18:55:45 2013 +0200 drm: delay minor destruction to drm_dev_free() However, this causes a call to drm_unplug_minor(), which should just do nothing as drm_dev_unregister() already called this. But a separate patch caused kdev lifetime changes: commit 5bdebb18 Author: Dave Airlie <airlied@redhat.com> Date: Fri Oct 11 14:07:25 2013 +1000 drm/sysfs: sort out minor and connector device object lifetimes. Thus making our dev_is_registered() call useles (and even segfault if it is NULL). Replace it with a simple !kdev test and we're fine. Reported-by:
Huax Lu <huax.lu@intel.com> Reported-by:
Daniel Vetter <daniel@ffwll.ch> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71208Tested-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Dave Airlie <airlied@gmail.com>
-
Steven Miao authored
Signed-off-by:Steven Miao <realmz6@gmail.com>
-
Steven Miao authored
add smb_wmb()/smp_rmb() to keep cache coherent Signed-off-by: -
Scott Jiang authored
We shouldn't sleep in atomic sections. Signed-off-by:Scott Jiang <scott.jiang.linux@gmail.com>
-
Sonic Zhang authored
The serial driver sets up port function manually in early platform probe stage if the ADI GPIO2 driver is used. Remove the bfin_sport_uart early platform devices. Signed-off-by:Sonic Zhang <sonic.zhang@analog.com>
-
Steven Miao authored
Signed-off-by: -
Geert Uytterhoeven authored
- Change fdt pointer (passed from head.S) from unsigned int to void *, which allows to kill a cast, and makes it compatible with __dtb_start. - Use pr_info(), - Extract common part. Signed-off-by:Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux@lists.openrisc.net Signed-off-by:
Jonas Bonn <jonas@southpole.se>
-
Wei Ni authored
Add OF document for LM90 in Documentation/devicetree/. [JD: Add this new file to the LM90 MAINTAINERS entry.] Signed-off-by:
Wei Ni <wni@nvidia.com> Signed-off-by:
Jean Delvare <khali@linux-fr.org>
-
Wei Ni authored
The device lm90 can be controlled by the vcc rail. Adding the regulator support to power on/off the vcc rail. Enable the "vcc" regulator before accessing the device. [JD: Rename variables to avoid confusion with registers.] Signed-off-by:
-
Wei Ni authored
TI TMP451 is mostly compatible with ADT7461, except for local temperature low byte and max conversion rate. Add support to the LM90 driver. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
