This driver supports GENI based UART Controller in the Qualcomm SOCs. The
Qualcomm Generic Interface (GENI) is a programmable module supporting a
wide range of serial interfaces including UART. This driver support console
operations using FIFO mode of transfer.
Signed-off-by: Girish Mahadevan <girishm@codeaurora.org>
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org>
Signed-off-by: Sagar Dharia <sdharia@codeaurora.org>
Signed-off-by: Doug Anderson <dianders@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add support for two MEN UARTs (16z025 and 16z057) to the
8250_men_mcb driver.
The 16z025 consists of up to four ports, the 16z057 has
exactly four ports. Apart from that, all of them share the
Port settings.
Signed-off-by: Michael Moese <mmoese@suse.de>
Reported-by: Ben Turner <ben.turner@21net.com>
Tested-by: Ben Turner <ben.turner@21net.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Re-use the object-like macro EARLYCON_USED_OR_UNUSED to mark
`earlycon_acpi_spcr_enable` as maybe_unused.

Fix the following warning (treated as error in W=1)

  CC      arch/powerpc/kernel/setup-common.o
In file included from ./include/linux/serial_8250.h:14:0,
                 from arch/powerpc/kernel/setup-common.c:33:
./include/linux/serial_core.h:382:19: error: ‘earlycon_acpi_spcr_enable’ defined but not used [-Werror=unused-const-variable=]
 static const bool earlycon_acpi_spcr_enable;
                   ^~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Configure RS485 mode during port initialization.

Fixes: 1bcda09d ("serial: stm32: add support for RS485 hardware control mode")
Signed-off-by: Bich Hemon <bich.hemon@st.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As serial interface is already specified into stdout-path property,
"console=ttyASN,115200" from bootargs can be removed.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ECMA-48 [1] (aka ISO 6429) has defined SGR 21 as "doubly underlined"
since at least March 1984.  The Linux kernel has treated it as SGR 22
"normal intensity" since it was added in Linux-0.96b in June 1992.
Before that, it was simply ignored.  Other terminal emulators have
either ignored it, or treat it as double underline now.  xterm for
example added support in its 304 release (May 2014) [2] where it was
previously ignoring it.

Changing this behavior shouldn't be an issue:
- It isn't a named capability in ncurses's terminfo database, so no
  script is using libtinfo/libcurses to look this up, or using tput
  to query & output the right sequence.
- Any script assuming SGR 21 will reset intensity in all terminals
  already do not work correctly on non-Linux VTs (including running
  under screen/tmux/etc...).
- If someone has written a script that only runs in the Linux VT, and
  they're using SGR 21 (instead of SGR 22), the output should still
  be readable.

imo it's important to change this as the Linux VT's non-conformance
is sometimes used as an argument for other terminal emulators to not
implement SGR 21 at all, or do so incorrectly.

[1]: https://www.ecma-international.org/publications/standards/Ecma-048.htm
[2]: https://github.com/ThomasDickey/xterm-snapshots/commit/2fd29cb98d214cb536bcafbee00bc73b3f1eeb9dSigned-off-by: Mike Frysinger <vapier@chromium.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix function name in serdev_device_alloc() definition
Signed-off-by: Frédéric Danis <frederic.danis.oss@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Update serial aliases from "ttyASN" to more common "serialN".

Since dtc v1.4.6-9-gaadd0b65c987, aliases property name must
be lowercase only. This allows to fix following dtc warnings:

arch/arm/boot/dts/stih418-b2199.dtb: Warning (alias_paths): /aliases: aliases property name must include only lowercase and '-'
arch/arm/boot/dts/stih407-b2120.dtb: Warning (alias_paths): /aliases: aliases property name must include only lowercase and '-'
arch/arm/boot/dts/stih410-b2260.dtb: Warning (alias_paths): /aliases: aliases property name must include only lowercase and '-'
arch/arm/boot/dts/stih410-b2120.dtb: Warning (alias_paths): /aliases: aliases property name must include only lowercase and '-'
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since dtc v1.4.6-9-gaadd0b65c987, aliases property name
must include only lowercase and '-'.

After having updated all STi boards serial aliases from "ttyASN"
to "serialN", st-asc driver need to be updated accordingly as tty
aliases id is retrieved using of_alias_get_id().
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Implement Driver Enable signal (DE) to activate the transmission mode
of the external transceiver.
Signed-off-by: Yves Coppeaux <yves.coppeaux@st.com>
Signed-off-by: Bich Hemon <bich.hemon@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add options for enabling RS485 hardware control and configuring
Driver Enable signal:
- rs485-rts-delay
- rs485-rx-during-tx
- rs485-rts-active-low
- linux,rs485-enabled-at-boot-time
Signed-off-by: Bich Hemon <bich.hemon@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This adds tests to check:
- bind-mounts from /dev/pts/ptmx to /dev/ptmx work
- non-standard mounts of devpts work
- bind-mounts of /dev/pts/ptmx to locations that do not resolve to a valid
  slave pty path under the originating devpts mount fail
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Most libcs will still look at /dev/ptmx when opening the master fd of a pty
device. When /dev/ptmx is a bind-mount of /dev/pts/ptmx and the TIOCGPTPEER
ioctl() is used to safely retrieve a file descriptor for the slave side of
the pty based on the master fd, the /proc/self/fd/{0,1,2} symlinks will
point to /. A very simply reproducer for this issue presupposing a libc
that uses TIOCGPTPEER in its openpty() implementation is:

unshare --mount
mount --bind /dev/pts/ptmx /dev/ptmx
chmod 666 /dev/ptmx
script
ls -al /proc/self/fd/0

Having bind-mounts of /dev/pts/ptmx to /dev/ptmx not working correctly is a
regression. In addition, it is also a fairly common scenario in containers
employing user namespaces.

The reason for the current failure is that the kernel tries to verify the
useability of the devpts filesystem without resolving the /dev/ptmx
bind-mount first. This will lead it to detect that the dentry is escaping
its bind-mount. The reason is that while the devpts filesystem mounted at
/dev/pts has the devtmpfs mounted at /dev as its parent mount:

21 -- -- / /dev
-- 21 -- / /dev/pts

devtmpfs and devpts are on different devices

-- -- 0:6  / /dev
-- -- 0:20 / /dev/pts

This has the consequence that the pathname of the parent directory of the
devpts filesystem mount at /dev/pts is /. So if /dev/ptmx is a bind-mount
of /dev/pts/ptmx then the /dev/ptmx bind-mount and the devpts mount at
/dev/pts will end up being located on the same device which is recorded in
the superblock of their vfsmount. This means the parent directory of the
/dev/ptmx bind-mount will be /ptmx:

-- -- ---- /ptmx /dev/ptmx

Without the bind-mount resolution patch the kernel will now perform the
bind-mount escape check directly on /dev/ptmx. The function responsible for
this is devpts_ptmx_path() which calls pts_path() which in turn calls
path_parent_directory(). Based on the above explanation,
path_parent_directory() will yield / as the parent directory for the
/dev/ptmx bind-mount and not the expected /dev. Thus, the kernel detects
that /dev/ptmx is escaping its bind-mount and will set /proc/<pid>/fd/<nr>
to /.

This patch changes the logic to first resolve any bind-mounts. After the
bind-mounts have been resolved (i.e. we have traced it back to the
associated devpts mount) devpts_ptmx_path() can be called. In order to
guarantee correct path generation for the slave file descriptor the kernel
now requires that a pts directory is found in the parent directory of the
ptmx bind-mount. This implies that when doing bind-mounts the ptmx
bind-mount and the devpts mount should have a common parent directory. A
valid example is:

mount -t devpts devpts /dev/pts
mount --bind /dev/pts/ptmx /dev/ptmx

an invalid example is:

mount -t devpts devpts /dev/pts
mount --bind /dev/pts/ptmx /ptmx

This allows us to support:
- calling open on ptmx devices located inside non-standard devpts mounts:
  mount -t devpts devpts /mnt
  master = open("/mnt/ptmx", ...);
  slave = ioctl(master, TIOCGPTPEER, ...);
- calling open on ptmx devices located outside the devpts mount with a
  common ancestor directory:
  mount -t devpts devpts /dev/pts
  mount --bind /dev/pts/ptmx /dev/ptmx
  master = open("/dev/ptmx", ...);
  slave = ioctl(master, TIOCGPTPEER, ...);

while failing on ptmx devices located outside the devpts mount without a
common ancestor directory:
  mount -t devpts devpts /dev/pts
  mount --bind /dev/pts/ptmx /ptmx
  master = open("/ptmx", ...);
  slave = ioctl(master, TIOCGPTPEER, ...);

in which case save path generation cannot be guaranteed.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Suggested-by: Eric Biederman <ebiederm@xmission.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Hoist the check whether we have already found a suitable devpts filesystem
out of devpts_ptmx_path() in preparation for the devpts bind-mount
resolution patch. This is a non-functional change.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Nuvoton UART is almost compatible with the 8250 driver when probed
via the 8250_of driver, however it requires some extra configuration
at startup.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In case of Alphascale ASM9260 probe() enables s->clk and s->clk_ahb
via mxs_get_clks(), but there is no disable of the clocks.
The patch adds it to error paths and to mxs_auart_remove().

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: 254da0d7 ("serial: mxs-auart: add Alphascale ASM9260 support")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Special settings for APMC0D08 are applied when device is present
in the system. To check its presence we may use acpi_dev_present()
instead of current open coded variant.

Cc: Feng Kan <fkan@apm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Having a fixed prefix helps at several places. It ensures that another
driver doesn't use the same function name which confuses the linker and
tools like ctags. It simplifies working with function tracing and
dynamic printk() support which can filter on function names. And last
but not least it helps the human source code reader to understand if a
given function belongs to a driver or a more general part of the kernel.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial_core might call the .start_tx callback without any data being
available to send. In this case return early instead of going through
all the setup needed for sending which might include disabling RX in
RS485 half-duplex mode.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When using RS485 half duplex the Transmitter Complete irq is needed to
determine the moment when the transmitter can be disabled. When using
DMA this irq must only be enabled when DMA has completed to transfer all
data. Otherwise the CPU might busily trigger this irq which is not
properly handled and so the also pending irq for the DMA transfer cannot
trigger.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This allows to increase the RX waterlevel which allows to delay the RRDY
irq. The desired effect is that less irqs are needed to handle
characters and so reduce irq count of the system.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Make sure that UCR1.RXDMAEN and UCR1.ATDMAEN (for the DMA case) and
UCR1.RRDYEN (for the PIO case) are off iff UCR1.RXEN is disabled. This
ensures that the fifo isn't read with RX disabled which results in an
exception.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When the UART is used in DMA mode, .stop_rx() does nothing if the port
isn't suspended. This is wrong as .stop_rx() should stop receiving
characters unconditionally. When the port is about to be closed the DMA
channel is stopped in .shutdown(), so this isn't necessary to be in
.stop_rx() here, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The aging timer fires if there are characters in the RX fifo but the
water level isn't reached yet. Make sure that the waterlevel is
configured before the aging timer is enabled to trigger a DMA request
(UCR1_ATDMAEN).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The serial/imx driver is full of inconsistently named and typed
variables that hold different register values.

Consistently use u32 as type (matching what readl and writel use) and
name the variables after the register whose value they are holding.
This makes it easier to notice when UCR2_RTSEN is written to UCR1.

The only difference introduced by this commit in the compiled driver is
that twice the second argument to warn_slowpath_null() changed because the
two WARN_ON in dma_rx_callback() pass __LINE__ to warn_slowpath_null().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The original code looks as follows:

	if (sport->dma_is_enabled) {
		... make sure TX DMA is running, i.e. .dma_is_txing = 1
	}

	if (sport->dma_is_txing)
		return;

As .dma_is_txing can only be true if .dma_is_enabled is, the return can
go at the end of the first if body without an additional check.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Neither .dma_is_txing nor .dma_is_rxing can evaluate to true if
.dma_is_enabled evaluates to false:

The only function that sets .dma_is_txing to a non-zero value is
imx_dma_tx() which is only called if .dma_is_enabled is true. Same for
.dma_is_rxing and start_rx_dma(). And before .dma_is_enabled is set to 0
when imx_shutdown calls imx_disable_dma(), .dma_is_rxing and
.dma_is_txing are reset to zero before, too.

For this reason

	sport->dma_is_enabled && sport->dma_is_rxing

has the same value as

	sport->dma_is_rxing

which allows to simplify three if conditions.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reduces the amount of read accesses to the register space by
shadowing the values for five registers that only change on writing
them. There is a single bit in UCR2 that might change without being
written to it, this is handled accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This prepares implementing shadow copies for the control registers and
additionally provides a good place to hook in debug code to trace
register usage.

Most of this patch was done using pattern substitution:

	perl -p -i -e '
		s/\breadl(?:_relaxed)?\((?:sport->port\.|port->)membase \+/imx_uart_readl(sport,/;
		s/\bwritel(?:_relaxed)?\(([^,]*), (sport->port\.|port->)membase \+/imx_uart_writel(sport, $1,/;
	' drivers/tty/serial/imx.c
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The RISC-V ISA defines a simple console that is availiable via SBI calls
on all systems.  The SBI console is designed to be availiable at all
times, so while it's most natural to use this as an early printk target
it's also possible to use this as the system console when there isn't a
better one availiable.

This patch adds support for the RISC-V SBI console via the HVC
infastructure.  It's entirely independent from our early printk support,
which results in early boot messages appearing twice over the SBI
console.  As far as I can tell that's the fault of our early printk
support (we should support earlycon) as opposed to this driver.

There is one checkpatch.pl warning here: to check the MAINTAINERS file.
They're all matched by the "K: riscv" line.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Consistently indicate being called with irqs off and the port lock taken
for all functions that this applies to.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Only the reference manual for the i.MX1 (I have MC9328MX1RM/D Rev 5 from
2004) uses TDMAEN and RDMAEN for these. All reference manuals for the
newer chips use TXDMAEN and RXDMAEN. Update to the newer name with the
assumption that most imx users don't use an imx1 any more.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI ID database is for IDs used across several drivers.
Here is the case for SUNIX combo cards.

No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The cdns_uart_port[] array is indexed using a value derived from the
"serialN" alias in DT, which may lead to an out-of-bounds access.

Fix this by adding a range check.

Fixes: 928e9263 ("tty: xuartps: Initialize ports according to aliases")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The sirf_ports[] array is indexed using a value derived from the
"serialN" alias in DT, which may lead to an out-of-bounds access.

Fix this by adding a range check.

Fixes: a6ffe896 ("serial: sirf: use dynamic method allocate uart structure")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The sci_ports[] array is indexed using a value derived from the
"serialN" alias in DT, which may lead to an out-of-bounds access.

Fix this by adding a range check.

Note that the array size is defined by a Kconfig symbol
(CONFIG_SERIAL_SH_SCI_NR_UARTS), so this can even be triggered using a
legitimate DTB.

Fixes: 97ed9790 ("serial: sh-sci: Remove unused platform data capabilities field")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The s3c24xx_serial_ports[] array is indexed using a value derived from
the "serialN" alias in DT, or from an incrementing probe index, which
may lead to an out-of-bounds access.

Fix this by adding a range check.

Note that the array size is defined by a Kconfig symbol
(CONFIG_SERIAL_SAMSUNG_UARTS), so this can even be triggered using
a legitimate DTB or legitimate board code.

Fixes: 13a9f6c6 ("serial: samsung: Consider DT alias when probing ports")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The serial_pxa_ports[] array is indexed using a value derived from the
"serialN" alias in DT, or from platform data, which may lead to an
out-of-bounds access.

Fix this by adding a range check.

Fixes: 699c20f3 ("serial: pxa: add OF support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The auart_port[] array is indexed using a value derived from the
"serialN" alias in DT, or from platform data, which may lead to an
out-of-bounds access.

Fix this by adding a range check.

Fixes: 1ea6607d ("serial: mxs-auart: Allow device tree probing")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>