According to the CMIS standard, the firmware update process is done using
a CDB commands sequence.

Implement a work that will be triggered from the module layer in the
next patch the will initiate and execute all the CDB commands in order, to
eventually complete the firmware update process.

This flashing process includes, writing the firmware image, running the new
firmware image and committing it after testing, so that it will run upon
reset.

This work will also notify user space about the progress of the firmware
update process.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

CDB (Command Data Block Message Communication) reads and writes are
performed on memory map pages 9Fh-AFh according to the CMIS standard,
section 8.20 of revision 5.2.
Page 9Fh is used to specify the CDB command to be executed and also
provides an area for a local payload (LPL).

According to the CMIS standard, the firmware update process is done using
a CDB commands sequence that will be implemented in the next patch.

The kernel interface that will implement the firmware update using CDB
command will include 2 layers that will be added under ethtool:

* The upper layer that will be triggered from the module layer, is
  cmis_fw_update.
* The lower one is cmis_cdb.

In the future there might be more operations to implement using CDB
commands. Therefore, the idea is to keep the CDB interface clean and the
cmis_fw_update specific to the CDB commands handling it.

These two layers will communicate using the API the consists of three
functions:

- struct ethtool_cmis_cdb *
  ethtool_cmis_cdb_init(struct net_device *dev,
			struct ethtool_module_fw_flash_params *params);
- void ethtool_cmis_cdb_fini(struct ethtool_cmis_cdb *cdb);
- int ethtool_cmis_cdb_execute_cmd(struct net_device *dev,
				   struct ethtool_cmis_cdb_cmd_args *args);

Add the CDB layer to support initializing, finishing and executing CDB
commands:

* The initialization process will include creating of an ethtool_cmis_cdb
  instance, querying the module CDB support, entering and validating the
  password from user space (CMD 0x0000) and querying the module features
  (CMD 0x0040).

* The finishing API will simply free the ethtool_cmis_cdb instance.

* The executing process will write the CDB command to EEPROM using
  set_module_eeprom_by_page() that was presented earlier, and will
  process the reply from EEPROM.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

SFF-8024 is used to define various constants re-used in several SFF
SFP-related specifications.

Add SFF-8024 extended compliance code definitions for CMIS compliant
modules and use them in the next patch to determine the firmware flashing
work.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some operations cannot be performed during the firmware flashing
process.

For example:

- Port must be down during the whole flashing process to avoid packet loss
  while committing reset for example.

- Writing to EEPROM interrupts the flashing process, so operations like
  ethtool dump, module reset, get and set power mode should be vetoed.

- Split port firmware flashing should be vetoed.

In order to veto those scenarios, add a flag in 'struct net_device' that
indicates when a firmware flash is taking place on the module and use it
to prevent interruptions during the process.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add progress notifications ability to user space while flashing modules'
firmware by implementing the interface between the user space and the
kernel.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

CMIS compliant modules such as QSFP-DD might be running a firmware that
can be updated in a vendor-neutral way by exchanging messages between
the host and the module as described in section 7.3.1 of revision 5.2 of
the CMIS standard.

Add a pair of new ethtool messages that allow:

* User space to trigger firmware update of transceiver modules

* The kernel to notify user space about the progress of the process

The user interface is designed to be asynchronous in order to avoid
RTNL being held for too long and to allow several modules to be
updated simultaneously. The interface is designed with CMIS compliant
modules in mind, but kept generic enough to accommodate future use
cases, if these arise.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement the ethtool_ops::set_module_eeprom_by_page operation to allow
ethtool to write to a transceiver module EEPROM, in a similar fashion to
the ethtool_ops::get_module_eeprom_by_page operation.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ethtool can already retrieve information from a transceiver module
EEPROM by invoking the ethtool_ops::get_module_eeprom_by_page operation.
Add a corresponding operation that allows ethtool to write to a
transceiver module EEPROM.

The new write operation is purely an in-kernel API and is not exposed to
user space.

The purpose of this operation is not to enable arbitrary read / write
access, but to allow the kernel to write to specific addresses as part
of transceiver module firmware flashing. In the future, more
functionality can be implemented on top of these read / write
operations.

Adjust the comments of the 'ethtool_module_eeprom' structure as it is
no longer used only for read access.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extract known PHY IDs from Linux kernel realtek PHY driver
and convert them into supported compatible string list for
this DT binding document.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Embedding net_device into structures prohibits the usage of flexible
arrays in the net_device structure. For more details, see the discussion
at [1].

Un-embed the net_devices from struct lmac by converting them
into pointers, and allocating them dynamically. Use the leverage
alloc_netdev() to allocate the net_device object at
bgx_lmac_enable().

The free of the device occurs at bgx_lmac_disable().

 Do not free_netdevice() if bgx_lmac_enable() fails after lmac->netdev
is allocated, since bgx_lmac_disable() is called if bgx_lmac_enable()
fails, and lmac->netdev will be freed there (similarly to lmac->dmacs).

Link: https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/ [1]
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20240626173503.87636-1-leitao@debian.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This reverts commit 934c2999.
This triggered a usercopy BUG() in systems with HIGHMEM, reported
by the test robot in:
 https://lore.kernel.org/oe-lkp/202406161539.b5ff7b20-oliver.sang@intel.comSigned-off-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://patch.msgid.link/20240626070153.759257-1-sagi@grimberg.meSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Aaron Conole says:

====================
selftests: net: Switch pmtu.sh to use the internal ovs script.

Currently, if a user wants to run pmtu.sh and cover all the provided test
cases, they need to install the Open vSwitch userspace utilities.  This
dependency is difficult for users as well as CI environments, because the
userspace build and setup may require lots of support and devel packages
to be installed, system setup to be correct, and things like permissions
and selinux policies to be properly configured.

The kernel selftest suite includes an ovs-dpctl.py utility which can
interact with the openvswitch module directly.  This lets developers and
CI environments run without needing too many extra dependencies - just
the pyroute2 python package.

This series enhances the ovs-dpctl utility to provide support for set()
and tunnel() flow specifiers, better ipv6 handling support, and the
ability to add tunnel vports, and LWT interfaces.  Finally, it modifies
the pmtu.sh script to call the ovs-dpctl.py utility rather than the
typical OVS userspace utilities.  The pmtu.sh can still fall back on
the Open vSwitch userspace utilities if the ovs-dpctl.py script can't
be used.
====================

Link: https://patch.msgid.link/20240625172245.233874-1-aconole@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The pmtu testing will require that the OVS module is installed,
so do that.
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20240625172245.233874-8-aconole@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The current pmtu test infrastucture requires an installed copy of the
ovs-vswitchd userspace.  This means that any automated or constrained
environments may not have the requisite tools to run the tests.  However,
the pmtu tests don't require any special classifier processing.  Indeed
they are only using the vswitchd in the most basic mode - as a NORMAL
switch.

However, the ovs-dpctl kernel utility can now program all the needed basic
flows to allow traffic to traverse the tunnels and provide support for at
least testing some basic pmtu scenarios.  More complicated flow pipelines
can be added to the internal ovs test infrastructure, but that is work for
the future.  For now, enable the most common cases - wide mega flows with
no other prerequisites.

Enhance the pmtu testing to try testing using the internal utility, first.
As a fallback, if the internal utility isn't running, then try with the
ovs-vswitchd userspace tools.

Additionally, make sure that when the pyroute2 package is not available
the ovs-dpctl utility will error out to properly signal an error has
occurred and skip using the internal utility.
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240625172245.233874-7-aconole@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The current iteration of IPv6 support requires explicit fields to be set
in addition to not properly support the actual IPv6 addresses properly.
With this change, make it so that the ipv6() bare option is usable to
create wildcarded flows to match broad swaths of ipv6 traffic.
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20240625172245.233874-6-aconole@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This will be used when setting details about the tunnel to use as
transport.  There is a difference between the ODP format between tunnel():
the 'key' flag is not actually a flag field, so we don't support it in the
same way that the vswitchd userspace supports displaying it.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240625172245.233874-5-aconole@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

These will be used in upcoming commits to set specific attributes for
interacting with tunnels.  Since set() will use the key parsing routine, we
also make sure to prepend it with an open paren, for the action parsing to
properly understand it.
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20240625172245.233874-4-aconole@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Until recently, the ovs-dpctl utility was used with a limited actions set
and didn't need to have support for multiple similar actions.  However,
when adding support for tunnels, it will be important to support multiple
set() actions in a single flow.  When printing these actions, the existing
code will be unable to print all of the sets - it will only print the
first.

Refactor this code to be easier to read and support multiple actions of the
same type in an action list.
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20240625172245.233874-3-aconole@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The OVS module can operate in conjunction with various types of
tunnel ports.  These are created as either explicit tunnel vport
types, OR by creating a tunnel interface which acts as an anchor
for the lightweight tunnel support.

This patch adds the ability to add tunnel ports to an OVS
datapath for testing various scenarios with tunnel ports.  With
this addition, the vswitch "plumbing" will at least be able to
push packets around using the tunnel vports.  Future patches
will add support for setting required tunnel metadata for lwts
in the datapath.  The end goal will be to push packets via these
tunnels, and will be used in an upcoming commit for testing the
path MTU.
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20240625172245.233874-2-aconole@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

With ARCH=s390, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/s390/net/lcs.o

Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://patch.msgid.link/20240625-md-s390-drivers-s390-net-v2-1-5a8a2b2f2ae3@quicinc.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use display hints for formatting scalar attrs. This is specifically
useful for formatting IPv4 addresses carried typically as u32.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20240626201234.2572964-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'wireless-next-2024-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Johannes Berg says:

====================
Highlights this time are:

 - cfg80211/nl80211:
    * improvements for 6 GHz regulatory flexibility

 - mac80211:
    * use generic netdev stats
    * multi-link improvements/fixes

 - brcmfmac:
    * MFP support (to enable WPA3)

 - wilc1000:
    * suspend/resume improvements

 - iwlwifi:
    * remove support for older FW for new devices
    * fast resume (keeping the device configured)

 - wl18xx:
    * support newer firmware versions

* tag 'wireless-next-2024-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (100 commits)
  wifi: brcmfmac: of: Support interrupts-extended
  wifi: brcmsmac: advertise MFP_CAPABLE to enable WPA3
  net: rfkill: Correct return value in invalid parameter case
  wifi: mac80211: fix NULL dereference at band check in starting tx ba session
  wifi: iwlwifi: mvm: fix rs.h kernel-doc
  wifi: iwlwifi: fw: api: datapath: fix kernel-doc
  wifi: iwlwifi: fix remaining mistagged kernel-doc comments
  wifi: iwlwifi: fix prototype mismatch kernel-doc warnings
  wifi: iwlwifi: fix kernel-doc in iwl-fh.h
  wifi: iwlwifi: fix kernel-doc in iwl-trans.h
  wifi: iwlwifi: pcie: fix kernel-doc
  wifi: iwlwifi: dvm: fix kernel-doc warnings
  wifi: iwlwifi: mvm: don't log error for failed UATS table read
  wifi: iwlwifi: trans: make bad state warnings
  wifi: iwlwifi: fw: api: fix some kernel-doc
  wifi: iwlwifi: mvm: remove init_dbg module parameter
  wifi: iwlwifi: update the BA notification API
  wifi: iwlwifi: mvm: always unblock EMLSR on ROC end
  wifi: iwlwifi: mvm: use IWL_FW_CHECK for link ID check
  wifi: iwlwifi: mvm: don't flush BSSes on restart with MLD API
  ...
====================

Link: https://patch.msgid.link/20240627114135.28507-3-johannes@sipsolutions.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Cross-merge networking fixes after downstream PR.

No conflicts.

Adjacent changes:
  e3f02f32 ("ionic: fix kernel panic due to multi-buffer handling")
  d9c04209 ("ionic: Mark error paths in the data path as unlikely")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Johannes Berg says:

====================
Just a few changes:
 - maintainers: Larry Finger sadly passed away
 - maintainers: ath trees are in their group now
 - TXQ FQ quantum configuration fix
 - TI wl driver: work around stuck FW in AP mode
 - mac80211: disable softirqs in some new code
   needing that

* tag 'wireless-2024-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  MAINTAINERS: wifi: update ath.git location
  MAINTAINERS: Remembering Larry Finger
  wifi: mac80211: disable softirqs for queued frame handling
  wifi: cfg80211: restrict NL80211_ATTR_TXQ_QUANTUM values
  wifi: wlcore: fix wlcore AP mode
====================

Link: https://patch.msgid.link/20240627083627.15312-3-johannes@sipsolutions.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from can, bpf and netfilter.

  There are a bunch of regressions addressed here, but hopefully nothing
  spectacular. We are still waiting the driver fix from Intel, mentioned
  by Jakub in the previous networking pull.

  Current release - regressions:

   - core: add softirq safety to netdev_rename_lock

   - tcp: fix tcp_rcv_fastopen_synack() to enter TCP_CA_Loss for failed
     TFO

   - batman-adv: fix RCU race at module unload time

  Previous releases - regressions:

   - openvswitch: get related ct labels from its master if it is not
     confirmed

   - eth: bonding: fix incorrect software timestamping report

   - eth: mlxsw: fix memory corruptions on spectrum-4 systems

   - eth: ionic: use dev_consume_skb_any outside of napi

  Previous releases - always broken:

   - netfilter: fully validate NFT_DATA_VALUE on store to data registers

   - unix: several fixes for OoB data

   - tcp: fix race for duplicate reqsk on identical SYN

   - bpf:
       - fix may_goto with negative offset
       - fix the corner case with may_goto and jump to the 1st insn
       - fix overrunning reservations in ringbuf

   - can:
       - j1939: recover socket queue on CAN bus error during BAM
         transmission
       - mcp251xfd: fix infinite loop when xmit fails

   - dsa: microchip: monitor potential faults in half-duplex mode

   - eth: vxlan: pull inner IP header in vxlan_xmit_one()

   - eth: ionic: fix kernel panic due to multi-buffer handling

  Misc:

   - selftest: unix tests refactor and a lot of new cases added"

* tag 'net-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
  net: mana: Fix possible double free in error handling path
  selftest: af_unix: Check SIOCATMARK after every send()/recv() in msg_oob.c.
  af_unix: Fix wrong ioctl(SIOCATMARK) when consumed OOB skb is at the head.
  selftest: af_unix: Check EPOLLPRI after every send()/recv() in msg_oob.c
  selftest: af_unix: Check SIGURG after every send() in msg_oob.c
  selftest: af_unix: Add SO_OOBINLINE test cases in msg_oob.c
  af_unix: Don't stop recv() at consumed ex-OOB skb.
  selftest: af_unix: Add non-TCP-compliant test cases in msg_oob.c.
  af_unix: Don't stop recv(MSG_DONTWAIT) if consumed OOB skb is at the head.
  af_unix: Stop recv(MSG_PEEK) at consumed OOB skb.
  selftest: af_unix: Add msg_oob.c.
  selftest: af_unix: Remove test_unix_oob.c.
  tracing/net_sched: NULL pointer dereference in perf_trace_qdisc_reset()
  netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers
  net: usb: qmi_wwan: add Telit FN912 compositions
  tcp: fix tcp_rcv_fastopen_synack() to enter TCP_CA_Loss for failed TFO
  ionic: use dev_consume_skb_any outside of napi
  net: dsa: microchip: fix wrong register write when masking interrupt
  Fix race for duplicate reqsk on identical SYN
  ibmvnic: Add tx check to prevent skb leak
  ...

Pull sound fixes from Takashi Iwai:
 "This became bigger than usual, as it receives a pile of pending ASoC
  fixes. Most of changes are for device-specific issues while there are
  a few core fixes that are all rather trivial:

   - DMA-engine sync fixes

   - Continued MIDI2 conversion fixes

   - Various ASoC Intel SOF fixes

   - A series of ASoC topology fixes for memory handling

   - AMD ACP fix, curing a recent regression, too

   - Platform / codec-specific fixes for mediatek, atmel, realtek, etc"

* tag 'sound-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (40 commits)
  ASoC: rt5645: fix issue of random interrupt from push-button
  ALSA: seq: Fix missing MSB in MIDI2 SPP conversion
  ASoC: amd: yc: Fix non-functional mic on ASUS M5602RA
  ALSA: hda/realtek: fix mute/micmute LEDs don't work for EliteBook 645/665 G11.
  ALSA: hda/realtek: Fix conflicting quirk for PCI SSID 17aa:3820
  ALSA: dmaengine_pcm: terminate dmaengine before synchronize
  ALSA: hda/relatek: Enable Mute LED on HP Laptop 15-gw0xxx
  ALSA: PCM: Allow resume only for suspended streams
  ALSA: seq: Fix missing channel at encoding RPN/NRPN MIDI2 messages
  ASoC: mediatek: mt8195: Add platform entry for ETDM1_OUT_BE dai link
  ASoC: fsl-asoc-card: set priv->pdev before using it
  ASoC: amd: acp: move chip->flag variable assignment
  ASoC: amd: acp: remove i2s configuration check in acp_i2s_probe()
  ASoC: amd: acp: add a null check for chip_pdev structure
  ASoC: Intel: soc-acpi: mtl: fix speaker no sound on Dell SKU 0C64
  ASoC: q6apm-lpass-dai: close graph on prepare errors
  ASoC: cs35l56: Disconnect ASP1 TX sources when ASP1 DAI is hooked up
  ASoC: topology: Fix route memory corruption
  ASoC: rt722-sdca-sdw: add debounce time for type detection
  ASoC: SOF: sof-audio: Skip unprepare for in-use widgets on error rollback
  ...

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains two Netfilter fixes for net:

Patch #1 fixes CONFIG_SYSCTL=n for a patch coming in the previous PR
	 to move the sysctl toggle to enable SRv6 netfilter hooks from
	 nf_conntrack to the core, from Jianguo Wu.

Patch #2 fixes a possible pointer leak to userspace due to insufficient
	 validation of NFT_DATA_VALUE.

Linus found this pointer leak to userspace via zdi-disclosures@ and
forwarded the notice to Netfilter maintainers, he appears as reporter
because whoever found this issue never approached Netfilter
maintainers neither via security@ nor in private.

netfilter pull request 24-06-27

* tag 'nf-24-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers
  netfilter: fix undefined reference to 'netfilter_lwtunnel_*' when CONFIG_SYSCTL=n
====================

Link: https://patch.msgid.link/20240626233845.151197-1-pablo@netfilter.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

When auxiliary_device_add() returns error and then calls
auxiliary_device_uninit(), callback function adev_release
calls kfree(madev). We shouldn't call kfree(madev) again
in the error handling path. Set 'madev' to NULL.

Fixes: a69839d4 ("net: mana: Add support for auxiliary device")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Link: https://patch.msgid.link/20240625130314.2661257-1-make24@iscas.ac.cnSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Kuniyuki Iwashima says:

====================
af_unix: Fix bunch of MSG_OOB bugs and add new tests.

This series rewrites the selftest for AF_UNIX MSG_OOB and fixes
bunch of bugs that AF_UNIX behaves differently compared to TCP.

Note that the test discovered few more bugs in TCP side, which
will be fixed in another series.
====================

Link: https://lore.kernel.org/r/20240625013645.45034-1-kuniyu@amazon.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

To catch regression, let's check ioctl(SIOCATMARK) after every
send() and recv() calls.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Even if OOB data is recv()ed, ioctl(SIOCATMARK) must return 1 when the
OOB skb is at the head of the receive queue and no new OOB data is queued.

Without fix:

  #  RUN           msg_oob.no_peek.oob ...
  # msg_oob.c:305:oob:Expected answ[0] (0) == oob_head (1)
  # oob: Test terminated by assertion
  #          FAIL  msg_oob.no_peek.oob
  not ok 2 msg_oob.no_peek.oob

With fix:

  #  RUN           msg_oob.no_peek.oob ...
  #            OK  msg_oob.no_peek.oob
  ok 2 msg_oob.no_peek.oob

Fixes: 314001f0 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

When OOB data is in recvq, we can detect it with epoll by checking
EPOLLPRI.

This patch add checks for EPOLLPRI after every send() and recv() in
all test cases.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

When data is sent with MSG_OOB, SIGURG is sent to a process if the
receiver socket has set its owner to the process by ioctl(FIOSETOWN)
or fcntl(F_SETOWN).

This patch adds SIGURG check after every send(MSG_OOB) call.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

When SO_OOBINLINE is enabled on a socket, MSG_OOB can be recv()ed
without MSG_OOB flag, and ioctl(SIOCATMARK) will behaves differently.

This patch adds some test cases for SO_OOBINLINE.

Note the new test cases found two bugs in TCP.

  1) After reading OOB data with non-inline mode, we can re-read
     the data by setting SO_OOBINLINE.

  #  RUN           msg_oob.no_peek.inline_oob_ahead_break ...
  # msg_oob.c:146:inline_oob_ahead_break:AF_UNIX :world
  # msg_oob.c:147:inline_oob_ahead_break:TCP     :oworld
  #            OK  msg_oob.no_peek.inline_oob_ahead_break
  ok 14 msg_oob.no_peek.inline_oob_ahead_break

  2) The head OOB data is dropped if SO_OOBINLINE is disabled
     if a new OOB data is queued.

  #  RUN           msg_oob.no_peek.inline_ex_oob_drop ...
  # msg_oob.c:171:inline_ex_oob_drop:AF_UNIX :x
  # msg_oob.c:172:inline_ex_oob_drop:TCP     :y
  # msg_oob.c:146:inline_ex_oob_drop:AF_UNIX :y
  # msg_oob.c:147:inline_ex_oob_drop:TCP     :Resource temporarily unavailable
  #            OK  msg_oob.no_peek.inline_ex_oob_drop
  ok 17 msg_oob.no_peek.inline_ex_oob_drop
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Currently, recv() is stopped at a consumed OOB skb even if a new
OOB skb is queued and we can ignore the old OOB skb.

  >>> from socket import *
  >>> c1, c2 = socket(AF_UNIX, SOCK_STREAM)
  >>> c1.send(b'hellowor', MSG_OOB)
  8
  >>> c2.recv(1, MSG_OOB)  # consume OOB data stays at middle of recvq.
  b'r'
  >>> c1.send(b'ld', MSG_OOB)
  2
  >>> c2.recv(10)          # recv() stops at the old consumed OOB
  b'hellowo'               # should be 'hellowol'

manage_oob() should not stop recv() at the old consumed OOB skb if
there is a new OOB data queued.

Note that TCP behaviour is apparently wrong in this test case because
we can recv() the same OOB data twice.

Without fix:

  #  RUN           msg_oob.no_peek.ex_oob_ahead_break ...
  # msg_oob.c:138:ex_oob_ahead_break:AF_UNIX :hellowo
  # msg_oob.c:139:ex_oob_ahead_break:Expected:hellowol
  # msg_oob.c:141:ex_oob_ahead_break:Expected ret[0] (7) == expected_len (8)
  # ex_oob_ahead_break: Test terminated by assertion
  #          FAIL  msg_oob.no_peek.ex_oob_ahead_break
  not ok 11 msg_oob.no_peek.ex_oob_ahead_break

With fix:

  #  RUN           msg_oob.no_peek.ex_oob_ahead_break ...
  # msg_oob.c:146:ex_oob_ahead_break:AF_UNIX :hellowol
  # msg_oob.c:147:ex_oob_ahead_break:TCP     :helloworl
  #            OK  msg_oob.no_peek.ex_oob_ahead_break
  ok 11 msg_oob.no_peek.ex_oob_ahead_break

Fixes: 314001f0 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

While testing, I found some weird behaviour on the TCP side as well.

For example, TCP drops the preceding OOB data when queueing a new
OOB data if the old OOB data is at the head of recvq.

  #  RUN           msg_oob.no_peek.ex_oob_drop ...
  # msg_oob.c:146:ex_oob_drop:AF_UNIX :x
  # msg_oob.c:147:ex_oob_drop:TCP     :Resource temporarily unavailable
  # msg_oob.c:146:ex_oob_drop:AF_UNIX :y
  # msg_oob.c:147:ex_oob_drop:TCP     :Invalid argument
  #            OK  msg_oob.no_peek.ex_oob_drop
  ok 9 msg_oob.no_peek.ex_oob_drop

  #  RUN           msg_oob.no_peek.ex_oob_drop_2 ...
  # msg_oob.c:146:ex_oob_drop_2:AF_UNIX :x
  # msg_oob.c:147:ex_oob_drop_2:TCP     :Resource temporarily unavailable
  #            OK  msg_oob.no_peek.ex_oob_drop_2
  ok 10 msg_oob.no_peek.ex_oob_drop_2

This patch allows AF_UNIX's MSG_OOB implementation to produce different
results from TCP when operations are guarded with tcp_incompliant{}.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Let's say a socket send()s "hello" with MSG_OOB and "world" without flags,

  >>> from socket import *
  >>> c1, c2 = socketpair(AF_UNIX)
  >>> c1.send(b'hello', MSG_OOB)
  5
  >>> c1.send(b'world')
  5

and its peer recv()s "hell" and "o".

  >>> c2.recv(10)
  b'hell'
  >>> c2.recv(1, MSG_OOB)
  b'o'

Now the consumed OOB skb stays at the head of recvq to return a correct
value for ioctl(SIOCATMARK), which is broken now and fixed by a later
patch.

Then, if peer issues recv() with MSG_DONTWAIT, manage_oob() returns NULL,
so recv() ends up with -EAGAIN.

  >>> c2.setblocking(False)  # This causes -EAGAIN even with available data
  >>> c2.recv(5)
  Traceback (most recent call last):
    File "<stdin>", line 1, in <module>
  BlockingIOError: [Errno 11] Resource temporarily unavailable

However, next recv() will return the following available data, "world".

  >>> c2.recv(5)
  b'world'

When the consumed OOB skb is at the head of the queue, we need to fetch
the next skb to fix the weird behaviour.

Note that the issue does not happen without MSG_DONTWAIT because we can
retry after manage_oob().

This patch also adds a test case that covers the issue.

Without fix:

  #  RUN           msg_oob.no_peek.ex_oob_break ...
  # msg_oob.c:134:ex_oob_break:AF_UNIX :Resource temporarily unavailable
  # msg_oob.c:135:ex_oob_break:Expected:ld
  # msg_oob.c:137:ex_oob_break:Expected ret[0] (-1) == expected_len (2)
  # ex_oob_break: Test terminated by assertion
  #          FAIL  msg_oob.no_peek.ex_oob_break
  not ok 8 msg_oob.no_peek.ex_oob_break

With fix:

  #  RUN           msg_oob.no_peek.ex_oob_break ...
  #            OK  msg_oob.no_peek.ex_oob_break
  ok 8 msg_oob.no_peek.ex_oob_break

Fixes: 314001f0 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

After consuming OOB data, recv() reading the preceding data must break at
the OOB skb regardless of MSG_PEEK.

Currently, MSG_PEEK does not stop recv() for AF_UNIX, and the behaviour is
not compliant with TCP.

  >>> from socket import *
  >>> c1, c2 = socketpair(AF_UNIX)
  >>> c1.send(b'hello', MSG_OOB)
  5
  >>> c1.send(b'world')
  5
  >>> c2.recv(1, MSG_OOB)
  b'o'
  >>> c2.recv(9, MSG_PEEK)  # This should return b'hell'
  b'hellworld'              # even with enough buffer.

Let's fix it by returning NULL for consumed skb and unlinking it only if
MSG_PEEK is not specified.

This patch also adds test cases that add recv(MSG_PEEK) before each recv().

Without fix:

  #  RUN           msg_oob.peek.oob_ahead_break ...
  # msg_oob.c:134:oob_ahead_break:AF_UNIX :hellworld
  # msg_oob.c:135:oob_ahead_break:Expected:hell
  # msg_oob.c:137:oob_ahead_break:Expected ret[0] (9) == expected_len (4)
  # oob_ahead_break: Test terminated by assertion
  #          FAIL  msg_oob.peek.oob_ahead_break
  not ok 13 msg_oob.peek.oob_ahead_break

With fix:

  #  RUN           msg_oob.peek.oob_ahead_break ...
  #            OK  msg_oob.peek.oob_ahead_break
  ok 13 msg_oob.peek.oob_ahead_break

Fixes: 314001f0 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

AF_UNIX's MSG_OOB functionality lacked thorough testing, and we found
some bizarre behaviour.

The new selftest validates every MSG_OOB operation against TCP as a
reference implementation.

This patch adds only a few tests with basic send() and recv() that
do not fail.

The following patches will add more test cases for SO_OOBINLINE, SIGURG,
EPOLLPRI, and SIOCATMARK.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

test_unix_oob.c does not fully cover AF_UNIX's MSG_OOB functionality,
thus there are discrepancies between TCP behaviour.

Also, the test uses fork() to create message producer, and it's not
easy to understand and add more test cases.

Let's remove test_unix_oob.c and rewrite a new test.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>