From: Manfred Spraul <manfred@colorfullife.com>

Add -ENOSYS stubs for the posix message queue syscalls.  The API is a direct
mapping of the api from the unix spec, with two exceptions:

- mq_close() doesn't exist.  Message queue file descriptors can be closed
  with close().

- mq_notify(SIGEV_THREAD) cannot be implemented in the kernel.  The kernel
  returns a pollable file descriptor .  User space must poll (or read) this
  descriptor and call the notifier function if the file descriptor is
  signaled.

From: Manfred Spraul <manfred@colorfullife.com>

cleanup of sysv ipc as a preparation for posix message queues:

- replace !CONFIG_SYSVIPC wrappers for copy_semundo and exit_sem with
  static inline wrappers.  Now the whole ipc/util.c file is only used if
  CONFIG_SYSVIPC is set, use makefile magic instead of #ifdef.

- remove the prototypes for copy_semundo and exit_sem from kernel/fork.c

- they belong into a header file.

- create a new msgutil.c with the helper functions for message queues.

- cleanup the helper functions: run Lindent, add __user tags.

From: Neil Brown <neilb@cse.unsw.edu.au>

Addresses http://bugme.osdl.org/show_bug.cgi?id=2355

It seems that a merge_bvec_fn needs to be aware of partitioning...  who
would have thought it :-(

The following patch should fix the merge_bvec_fn for both linear and raid0.
We teach linear and raid0 about partitions in the merge_bvec_fn.

->merge_bvec_fn needs to make decisions based on the physical geometry of the
device.  For raid0, it needs to decide if adding the bvec to the bio will
make the bio span two drives.

To do this, it needs to know where the request is (what the sector number is)
in the whole device.

However when called from bio_add_page, bi_sector is the sector number
relative to the current partition, as generic_make_request hasn't been called
yet.

So raid_mergeable_bvec needs to map bio->bi_sector (which is partition
relative) to a bi_sector which is device relative, so it can perform proper
calculations about when chunk boundaries are.

From: NeilBrown <neilb@cse.unsw.edu.au>

From: "J. Bruce Fields" <bfields@fieldses.org>

rpcsec_gss supports three security levels:

1.  authentication only: sign the header of each rpc request and response.

2. integrity: sign the header and body of each rpc request and response.

3.  privacy: sign the header and encrypt the body of each rpc request and
   response.

The first 2 are already supported on the client; this adds integrity support
on the server.

From: NeilBrown <neilb@cse.unsw.edu.au>

From: "J. Bruce Fields" <bfields@fieldses.org>

Without this compiling auth_gss as module fails.

From: NeilBrown <neilb@cse.unsw.edu.au>

From: Fred.  We don't do all the utf8 checking we could in the kernel, but we
do some simple checks.  Implement slightly stricter, and probably more
efficient, checking.

From: NeilBrown <neilb@cse.unsw.edu.au>

From: NeilBrown <neilb@cse.unsw.edu.au>

From: NeilBrown <neilb@cse.unsw.edu.au>

From: Fred Isaman

From: NeilBrown <neilb@cse.unsw.edu.au>

From: NeilBrown <neilb@cse.unsw.edu.au>

It's better than oopsing.

From: Olaf Hering <olh@suse.de>

initramfs can not be used in current 2.6 kernels, the files will never be
executed because prepare_namespace doesn't care about them.  The only way to
workaround that limitation is a root=0:0 cmdline option to force rootfs as
root filesystem.  This will break further booting because rootfs is not the
final root filesystem.

This patch checks for the presence of /init which comes from the cpio archive
(and thats the only way to store files into the rootfs).  This binary/script
has to do all the work of prepare_namespace().

Teach inode.c about list_move().

From: Jan Kara <jack@ucw.cz>

Change locking rules in quota code to fix lock ordering especially wrt
journal lock.  Also some unnecessary spinlocking is removed.  The locking
changes are mainly: dqptr_sem, dqio_sem are acquired only when transaction is
already started, dqonoff_sem before a transaction is started.  This change
requires some callbacks to ext3 (also implemented in this patch) to start
transaction before the locks are acquired.

From: Matt Porter <mporter@kernel.crashing.org>

This fixes a memory leak when freeing pgds on PPC44x.

From: Anton Blanchard <anton@samba.org>

UP compile fixes

From: Anton Blanchard <anton@samba.org>

Quieten NVRAM driver

From: Joel Schopp <jschopp@austin.ibm.com>

I was looking at rtas serialization for reasons I won't go into here.
While wandering through the code I found that two functions were not
properly serialized.  phys_call_rtas and phys_call_rtas_display_status are
the functions.  After looking further they are redundant and not
used anywhere at all.

From: Anton Blanchard <anton@samba.org>

DMA API updates, in particular adding the new cache flush interfaces.

From: Anton Blanchard <anton@samba.org>

Add smt_snooze_delay cpu sysfs attribute

From: Anton Blanchard <anton@samba.org>

Oops cleanup:

- Move prototypes into system.h
- Move the debugger hooks into die, all the calls sites were calling them.
- Handle bad values passed to prregs

From: Anton Blanchard <anton@samba.org>

From: Stephen Rothwell <sfr@canb.auug.org.au>

James Bottomley is right, this was a mistake.  This patch replaces
vio_dma_mapping_error with dma_mapping_error everywhere.

[PATCH] ppc64: change the iSeries virtual device drivers to use the vio infrastructure for DMA mapping

From: Stephen Rothwell <sfr@canb.auug.org.au>

This patch changes the iSeries virtual device drivers to use the
vio infrastructure for DMA mapping instead of the PCI infrastructure.
This is a step along the way to integrating them correctly into the
driver model.

From: Stephen Rothwell <sfr@canb.auug.org.au>

This patch consolidates some of the iommu DMA mapping routines.

From: Stephen Rothwell <sfr@canb.auug.org.au>

This is just a cleanup to use enum dma_data_direction for all APIs
except the pci_dma_ ones (since they are defined generically).

Also make most of the functions in arch/ppc64/kernel/pci_iommu.c
static.

From: Stephen Rothwell <sfr@canb.auug.org.au>

This patch uses enum dma_data_direction for the vio DMA api routines.
This allows us to remove some include of linux/pci.h.

Also missed some pci_dma_mapping_error uses.

From: Anton Blanchard <anton@samba.org>

Register secondary threads in NUMA init code

From: Anton Blanchard <anton@samba.org>

Add HW PMC support to oprofile

From: Anton Blanchard <anton@samba.org>

Add PMCs to sysfs.

From: Anton Blanchard <anton@samba.org>

Add some POWER5 specific optimisations:
- icache is coherent, no need to explicitly flush
- tlbie lock no longer required

From: Anton Blanchard <anton@samba.org>

Move sysfs specific stuff into sysfs.c

From: Anton Blanchard <anton@samba.org>

Update CPU features. Remove DABR feature, all cpus have it. Add MMCRA,
PMC8, SMT, COHERENT_ICACHE, LOCKLESS_TLBIE features

From: David Engebretsen <engebret@us.ibm.com>

Put SMT threads into global interrupt queue

From: Anton Blanchard <anton@samba.org>

Create xics get_irq_server and use it in enable/disable code.

From: Paul Mackerras <paulus@samba.org>

Create and use irq_offset_up/down, get_irq_desc, for_each_irq

From: Anton Blanchard <anton@samba.org>

Fix xics irq affinity bug. We were anding with cpu_online_map but werent
using the result later on.

From: Michael Strosaker <strosake@us.ibm.com>

Add RTAS os-term call for panic on pSeries

From: Joel Schopp <jschopp@austin.ibm.com>

Add support for hotplug cpus

From: Will Schmidt <willschm@us.ibm.com>

Additional PVR value for power5 processor