- 16 Jun, 2017 32 commits
-
-
David S. Miller authored
Martin KaFai Lau says: ==================== bpf: xdp: Report bpf_prog ID in IFLA_XDP This is the first usage of the new bpf_prog ID. It is for reporting the ID of a xdp_prog through netlink. It rides on the existing IFLA_XDP. This patch adds IFLA_XDP_PROG_ID for the bpf_prog ID reporting. It starts with changing the generic_xdp first. After that, the hardware driver is changed one by one. Jakub Kicinski mentioned that he will soon introduce XDP_ATTACHED_HW (on top of the existing XDP_ATTACHED_DRV and XDP_ATTACHED_SKB) and he is going to reuse the prog_attached for this purpose. Hence, this patch set keeps the prog_attached even though !!prog_id also implies there is xdp_prog attached. I have tested with generic_xdp, mlx4 and mlx5. v3: 1. Replace 'if' by '?' when checking the xdp_prog pointer as suggested by Jakub Kicinski (thanks!) v2: 1. Remove READ_ONCE since it is alredy under rtnl lock 2. Keep prog_attached in 'struct netdev_xdp' as requested by Jakub Kicinski. The existing prog_attached and the new prog_id are put under a struct for XDP_QUERY_PROG. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Martin KaFai Lau authored
Add support to qede to report bpf_prog ID during XDP_QUERY_PROG. Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Cc: Mintz Yuval <Yuval.Mintz@cavium.com> Acked-by:
Alexei Starovoitov <ast@fb.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Martin KaFai Lau authored
Add support to nfp to report bpf_prog ID during XDP_QUERY_PROG. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Martin KaFai Lau authored
Add support to ixgbe to report bpf_prog ID during XDP_QUERY_PROG. Signed-off-by:
-
Martin KaFai Lau authored
Add support to thunderx to report bpf_prog ID during XDP_QUERY_PROG. Signed-off-by:
-
Martin KaFai Lau authored
Add support to bnxt to report bpf_prog ID during XDP_QUERY_PROG. Signed-off-by:
-
Martin KaFai Lau authored
Add support to virtio_net to report bpf_prog ID during XDP_QUERY_PROG. Signed-off-by:
-
Martin KaFai Lau authored
Add support to mlx5e to report bpf_prog ID during XDP_QUERY_PROG. Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Martin KaFai Lau authored
Add support to mlx4 to report bpf_prog ID during XDP_QUERY_PROG. Signed-off-by:
-
Martin KaFai Lau authored
Expose prog_id through IFLA_XDP_PROG_ID. This patch makes modification to generic_xdp. The later patches will modify other xdp-supported drivers. prog_id is added to struct net_dev_xdp. iproute2 patch will be followed. Here is how the 'ip link' will look like: > ip link show eth0 3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 xdp(prog_id:1) qdisc fq_codel state UP mode DEFAULT group default qlen 1000 Signed-off-by:
-
David S. Miller authored
Johannes Berg says: ==================== skb data accessors cleanup Over night, Fengguang's bot told me that it compiled all of its many various configurations successfully, and I had done allyesconfig on x86_64 myself yesterday to iron out the things I missed. So now I think I'm happy with it. My tree was based on your commit 3715c47b Merge: 18b6e795 d8fbd274 Author: David S. Miller <davem@davemloft.net> Date: Thu Jun 15 14:31:56 2017 -0400 Merge branch 'r8152-support-new-chips' when the compilation tests happened, but I've reviewed the changes coming into net-next in the meantime and didn't see any new usages of skb data accessors having come in. ==================== Signed-off-by: -
Johannes Berg authored
Joe and Bjørn suggested that it'd be nicer to not have the cast in the fairly common case of doing *(u8 *)skb_put(skb, 1) = c; Add skb_put_u8() for this case, and use it across the code, using the following spatch: @@ expression SKB, C, S; typedef u8; identifier fn = {skb_put}; fresh identifier fn2 = fn ## "_u8"; @@ - *(u8 *)fn(SKB, S) = C; + fn2(SKB, C); Note that due to the "S", the spatch isn't perfect, it should have checked that S is 1, but there's also places that use a sizeof expression like sizeof(var) or sizeof(u8) etc. Turns out that nobody ever did something like *(u8 *)skb_put(skb, 2) = c; which would be wrong anyway since the second byte wouldn't be initialized. Suggested-by:Joe Perches <joe@perches.com> Suggested-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: -
Johannes Berg authored
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_pull, __skb_pull, skb_pull_inline, __pskb_pull_tail, __pskb_pull, pskb_pull }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_pull, __skb_pull, skb_pull_inline, __pskb_pull_tail, __pskb_pull, pskb_pull }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) Signed-off-by: -
Johannes Berg authored
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions (skb_put, __skb_put and pskb_put) return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_put, __skb_put }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_put, __skb_put }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) which actually doesn't cover pskb_put since there are only three users overall. A handful of stragglers were converted manually, notably a macro in drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many instances in net/bluetooth/hci_sock.c. In the former file, I also had to fix one whitespace problem spatch introduced. Signed-off-by: -
Johannes Berg authored
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by:Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Johannes Berg authored
There were many places that my previous spatch didn't find, as pointed out by yuan linyu in various patches. The following spatch found many more and also removes the now unnecessary casts: @@ identifier p, p2; expression len; expression skb; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_zero(skb, len); | -p = (t)skb_put(skb, len); +p = skb_put_zero(skb, len); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, len); | -memset(p, 0, len); ) @@ type t, t2; identifier p, p2; expression skb; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, sizeof(*p)); | -memset(p, 0, sizeof(*p)); ) @@ expression skb, len; @@ -memset(skb_put(skb, len), 0, len); +skb_put_zero(skb, len); Apply it to the tree (with one manual fixup to keep the comment in vxlan.c, which spatch removed.) Signed-off-by: -
David S. Miller authored
Hayes Wang says: ==================== r8152: adjust runtime suspend/resume v2: For #1, replace GFP_KERNEL with GFP_NOIO for usb_submit_urb(). v1: Improve the flow about runtime suspend/resume and make the code easy to read. ==================== Signed-off-by: -
hayeswang authored
Move calling delay_autosuspend() in rtl8152_runtime_suspend(). Calling delay_autosuspend() as late as possible. The original flows are 1. check if the driver/device is busy now. 2. set wake events. 3. enter runtime suspend. If the wake event occurs between (1) and (2), the device may miss it. Besides, to avoid the runtime resume occurs after runtime suspend immediately, move the checking to the end of rtl8152_runtime_suspend(). Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
hayeswang authored
Split rtl8152_resume() into rtl8152_runtime_resume() and rtl8152_system_resume(). Besides, replace GFP_KERNEL with GFP_NOIO for usb_submit_urb(). Signed-off-by:
-
David S. Miller authored
We refer to TCP et al. symbols so have to use INET as the dependency. ERROR: "tcp_prot" [net/tls/tls.ko] undefined! >> ERROR: "tcp_rate_check_app_limited" [net/tls/tls.ko] undefined! ERROR: "tcp_register_ulp" [net/tls/tls.ko] undefined! ERROR: "tcp_unregister_ulp" [net/tls/tls.ko] undefined! ERROR: "do_tcp_sendpages" [net/tls/tls.ko] undefined! Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
David S. Miller authored
Tariq Toukan says: ==================== mlx4 XDP performance improvements This patchset contains data-path improvements, mainly for XDP_DROP and XDP_TX cases. Main patches: * Patch 2 by Saeed allows enabling optimized A0 RX steering (in HW) when setting a single RX ring. With this configuration, HW packet-rate dramatically improves, reaching 28.1 Mpps in XDP_DROP case for both IPv4 (37% gain) and IPv6 (53% gain). * Patch 6 enhances the XDP xmit function. Among other changes, now we ring one doorbell per NAPI. Patch gives 17% gain in XDP_TX case. * Patch 7 obsoletes the NAPI of XDP_TX completion queue and integrates its poll into the respective RX NAPI. Patch gives 15% gain in XDP_TX case. Series generated against net-next commit: f7aec129 rxrpc: Cache the congestion window setting ==================== Signed-off-by:
-
Tariq Toukan authored
Some code re-ordering, functionally equivalent. - The !tx_info->inl check is evaluated anyway in both flows (common case/end case). Run it first, this might finish the flows earlier. - dma_unmap calls are identical in both flows, get it out of the if block into the common area. Performance tests: Tested on ConnectX3Pro, Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz Gain is too small to be measurable, no degradation sensed. Results are similar for IPv4 and IPv6. Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Reviewed-by:
-
Tariq Toukan authored
Define LOG_TXBB_SIZE, log of TXBB_SIZE, and use it with a shift operation instead of a multiplication with TXBB_SIZE. Operations are equivalent as TXBB_SIZE is a power of two. Performance tests: Tested on ConnectX3Pro, Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz Gain is too small to be measurable, no degradation sensed. Results are similar for IPv4 and IPv6. Signed-off-by:
-
Tariq Toukan authored
Increase the default TX ring size (from 512 to 1024) to match the RX ring size. This gives the XDP TX ring a better chance to keep up with the rate of its RX ring in case of a high load of XDP_TX actions. Tested: Ethtool counter rx_xdp_tx_full used to increase, after applying this patch it stopped. Signed-off-by:
-
Tariq Toukan authored
Instead of having their own NAPIs, XDP TX completion queues get polled within the corresponding RX NAPI. This prevents any possible race on TX ring prod/cons indices, between the context that issues the transmits (RX NAPI) and the context that handles the completions (was previously done in a separate NAPI). This also improves performance, as it decreases the number of NAPIs running on a CPU, saving the overhead of syncing and switching between the contexts. Performance tests: Tested on ConnectX3Pro, Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz Single queue no-RSS optimization ON. XDP_TX packet rate: ------------------------------------- | Before | After | Gain | IPv4 | 12.0 Mpps | 13.8 Mpps | 15% | IPv6 | 12.0 Mpps | 13.8 Mpps | 15% | ------------------------------------- Signed-off-by: -
Tariq Toukan authored
Several performance improvements in XDP TX datapath, including: - Ring a single doorbell for XDP TX ring per NAPI budget, instead of doing it per a lower threshold (was 8). This includes removing the flow of immediate doorbell ringing in case of a full TX ring. - Compiler branch predictor hints. - Calculate values in compile time rather than in runtime. Performance tests: Tested on ConnectX3Pro, Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz Single queue no-RSS optimization ON. XDP_TX packet rate: ------------------------------------- | Before | After | Gain | IPv4 | 10.3 Mpps | 12.0 Mpps | 17% | IPv6 | 10.3 Mpps | 12.0 Mpps | 17% | ------------------------------------- Signed-off-by: -
Tariq Toukan authored
Several small code and performance improvements in stack TX datapath, including: - Compiler branch predictor hints. - Minimize variables scope. - Move tx_info non-inline flow handling to a separate function. - Calculate data_offset in compile time rather than in runtime (for !lso_header_size branch). - Avoid trinary-operator ("?") when value can be preset in a matching branch. Performance tests: Tested on ConnectX3Pro, Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz Gain is too small to be measurable, no degradation sensed. Results are similar for IPv4 and IPv6. Signed-off-by: -
Tariq Toukan authored
Several small performance improvements in TX CQ polling, including: - Compiler branch predictor hints. - Minimize variables scope. - More proper check of cq type. - Use boolean instead of int for a binary indication. Performance tests: Tested on ConnectX3Pro, Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz Packet-rate tests for both regular stack and XDP use cases: No noticeable gain, no degradation. Signed-off-by:
-
Tariq Toukan authored
Several small performance improvements in RX datapath, including: - Compiler branch predictor hints. - Replace a multiplication with a shift operation. - Minimize variables scope. - Write-prefetch for packet header. - Avoid trinary-operator ("?") when value can be preset in a matching branch. - Save a branch by updating RX ring doorbell within mlx4_en_refill_rx_buffers(), which now returns void. Performance tests: Tested on ConnectX3Pro, Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz Single queue no-RSS optimization ON (enable by ethtool -L <interface> rx 1). XDP_DROP packet rate: Same (28.1 Mpps), lower CPU utilization (from ~100% to ~92%). Drop packets in TC: ------------------------------------- | Before | After | Gain | IPv4 | 4.14 Mpps | 4.18 Mpps | 1% | ------------------------------------- XDP_TX packet rate: ------------------------------------- | Before | After | Gain | IPv4 | 10.1 Mpps | 10.3 Mpps | 2% | IPv6 | 10.1 Mpps | 10.3 Mpps | 2% | ------------------------------------- Signed-off-by: -
Saeed Mahameed authored
Avoid touching RX QP RSS context when loading with only one RX ring, to allow optimized A0 RX steering. Enable by: - loading mlx4_core with module param: log_num_mgm_entry_size = -6. - then: ethtool -L <interface> rx 1 Performance tests: Tested on ConnectX3Pro, Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz XDP_DROP packet rate: ------------------------------------- | Before | After | Gain | IPv4 | 20.5 Mpps | 28.1 Mpps | 37% | IPv6 | 18.4 Mpps | 28.1 Mpps | 53% | ------------------------------------- Signed-off-by: -
Tariq Toukan authored
Remove owner argument, as it is obsolete and unused. This also saves the overhead of calculating its value in data-path. Signed-off-by:
-
- 15 Jun, 2017 8 commits
-
-
Gustavo A. R. Silva authored
Value assigned to variable _data32_ at lines 1254 and 1257 is overwritten at line 1260 before it can be used. This makes such variable assignments useless. Addresses-Coverity-ID: 1227049 Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by:
-
Vivien Didelot authored
The current code only assigns the default cpu_dp to all user ports of the switch to which the CPU port belongs. The user ports of the other switches of the fabric thus don't have a default CPU port. This patch fixes this by assigning the cpu_dp of all user ports of all switches of the fabric when the tree is fully parsed. Fixes: a29342e7 ("net: dsa: Associate slave network device with CPU port") Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David S. Miller authored
Hayes Wang says: ==================== r8152: support new chips These patches are used to support new chips. ==================== Signed-off-by: -
hayeswang authored
Add byte_enable for ocp_read_word() to replace reading 4 bytes data with reading the desired 2 bytes data. This is used to avoid the issue which is described in commit b4d99def ("r8152: remove sram_read"). The original method always reads 4 bytes data, and it may have problem when reading the PHY registers. The new method is supported since RTL8153B, but it doesn't influence the previous chips. The bits of the byte_enable for the previous chips are the reserved bits, and the hw would ignore them. Signed-off-by:
-
hayeswang authored
This patch supports two new chips for RTL8153B. Signed-off-by:
-
hayeswang authored
The settings of the new chip are the same with RTL8152, except that its product ID is 0x8050. Signed-off-by:
-
David S. Miller authored
Thomas Falcon says: ==================== ibmvnic: LPM bug fixes This series of small patches is meant to resolve a number of bugs, mostly occurring during an ibmvnic driver reset when recovering from a logical partition migration (LPM). The first patch ensures that RX buffer pools are properly activated following an adapter reset by setting the proper flag in the pool data structure. The second patch uses netif_tx_disable to stop TX queues when closing the device during a reset. Third, fixup a typo that resulted in partial sanitization of TX/RX descriptor queues following a device reset. Fourth, remove an ambiguous conditional check that was resulting in a kernel panic as null RX/TX completion descriptors were being processed during napi polling while the device is closing. Finally, fix a condition where the napi polling routine exits before it has completed its work budget without notifying the upper network layers. This omission could result in the napi_disable function sleeping indefinitely under certain conditions. v2: Attempt to provide a proper cover letter ==================== Signed-off-by: -
Thomas Falcon authored
This patch fixes a bug where, in the case of a device reset, the polling routine will never complete, causing napi_disable to sleep indefinitely when attempting to close the device. Signed-off-by:
Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by:
-
