- 21 Jun, 2019 40 commits
-
-
Johan Korsnes authored
Add a custom control for selecting the presence of a display connected to the active output. This control is part of an effort to implement proper HDMI (dis)connect behavior for vivid. Signed-off-by:
Johan Korsnes <johan.korsnes@gmail.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Johan Korsnes authored
Make the following properties per-input: -Standard Signal Mode -Standard These properties need to be per-input in order to implement proper HDMI (dis)connect-behavior, where the signal mode will be used to signify whether or not there is an inpute device connected. Signed-off-by:
-
Johan Korsnes authored
Make the following properties per-input -DV Timings Signal Mode -DV Timings These properties need to be per-input in order to implement proper HDMI (dis)connect-behavior, where the signal mode will be used to signify whether or not there is an input device connected. Signed-off-by:
-
Dmitry Osipenko authored
The __packed macro isn't available in userspace with the kernel headers. Checkpatch asks to use the macro, which is unwanted in a case of a UAPI header. There is no much benefit in a tight packing of the structures, hence let's pack them manually to cleanup things a tad. Note that there is no old-stable userspace that will suffer from this change, hence it's fine to change the ABI. In a result also more space is reserved for a possible future expansion of the UAPI as it was already shown that more fields will be needed for a later SoC generations. Suggested-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
-
Dmitry Osipenko authored
The BIT macro isn't available in userspace. Checkpatch complains about shifts being used instead of the macro and people are starting to send patches without realizing that it's a UAPI header file. Hence let's replace the BIT macro with a hex values to make everyone happy. Signed-off-by:
-
Fabio Estevam authored
Use devm_platform_ioremap_resource() to simplify the code a bit. Signed-off-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
-
Jae Hyun Yoo authored
AST2500 silicon revision A1 and A2 have a silicon bug which causes extremly long capturing time on specific resolutions (1680 width). To fix the bug, this commit adjusts the capturing window register setting to 1728 if detected width is 1680. The compression window register setting will be kept as the original width so output result will be the same. Signed-off-by:
Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by:
Eddie James <eajames@linux.ibm.com> Signed-off-by:
-
Fabio Estevam authored
As per the i.MX7D Reference Manual only the MCLK is used for the CSI block, so only document this single clock. Signed-off-by:
Rui Miguel Silva <rmfrfs@gmail.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
André Almeida authored
Create vimc documentation file to explain its basic features, its topology, how to configure it and to document vimc's subdevices. Signed-off-by:
André Almeida <andrealmeid@collabora.com> Suggested-by:
Helen Koike <helen.koike@collabora.com> [hverkuil-cisco@xs4all.nl: Fix typo: The ``v4l2-utils`` -> The ``v4l-utils`` package] Signed-off-by:
-
André Almeida authored
Add comments at vimc_streamer_s_stream and vimc_streamer_thread, making the vimc-stream totally documented. Signed-off-by:
-
Akinobu Mita authored
Use V4L2_FRACT_COMPARE to check whether two v4l2_fract structs are equal. Cc: Matt Ranostay <matt.ranostay@konsulko.com> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
YueHaibing authored
If COMPILE_TEST is y and SONY_LAPTOP is m, building fails as below: Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: 6159e12e ("media: meye: allow building it with COMPILE_TEST on non-x86") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Luca Ceresoli authored
This sentence renders as: > Since such compound controls need to expose more information about > themselves than is possible with ioctls VIDIOC_QUERYCTRL, > VIDIOC_QUERY_EXT_CTRL and VIDIOC_QUERYMENU the VIDIOC_QUERY_EXT_CTRL ^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^ > ioctl was added. This does not make sense. Fix by providing an explicit link text. This results in: > Since such compound controls need to expose more information about > themselves than is possible with VIDIOC_QUERYCTRL the > VIDIOC_QUERY_EXT_CTRL ioctl was added. Signed-off-by:
Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by:
-
Akinobu Mita authored
The tpf_min (1/100) and tpf_max (100/1) are used as the lowest and the highest allowable value for the desired frame period in vivid_vid_cap_s_parm(). But the comparison between these values is unnecessary because the compared value is already chosen from webcam_intervals[] (from 1/60 to 1/1). Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Alexandre Courbot authored
We were getting the codec interface through a proxy function that does not bring anything compared to just accessing the interface definition directly, so just do that. Also make the decoder interfaces const. Signed-off-by:
Alexandre Courbot <acourbot@chromium.org> Signed-off-by:
-
Alexandre Courbot authored
The interface used to communicate with the firmware casts pointers into unsigned longs and back again in order to store private references, all of this for pointers that remain purely in the kernel. Replace these unsigned longs with void pointers to make the code a bit sturdier and easier to follow. Also simplify some interfaces by removing arguments that could be infered from others. Signed-off-by:
-
André Almeida authored
Remove redundant Makefile rules (vimc_capture-objs, ...). Stop exposing vimc-{common, streamer} as modules, since there's no use case where they would be individually added/removed from Vimc. As consequence, remove MODULE_ macros from vimc-{common, streamer}. `-objs` is fitted for building host programs, change to `-y`, more straightforward for device drivers. Signed-off-by: -
André Almeida authored
Fix typo on "tranforming". Add a line break so it keeps under 80 columns. Fix typo on "[it] need". Signed-off-by:
-
Luca Ceresoli authored
This paragraph was added by commit a42b57f5 ("V4L/DVB: Documentation: add v4l2-controls.txt documenting the new controls API") back in 2010, when the controls API has been improved. Nowadays it is a bit anachronistic, so remove it. The same information is stated in up-to-date wording a few paragraphs later > You’re done! And this is sufficient for most of the drivers we have. No > need to do any validation of control values, or implement QUERYCTRL, > QUERY_EXT_CTRL and QUERYMENU. And G/S_CTRL as well as G/TRY/S_EXT_CTRLS > are automatically supported. Signed-off-by:
-
Luca Ceresoli authored
The tutorial in this section is almost complete, add the one missing bit. Signed-off-by:
-
Luca Ceresoli authored
All these code blocks contain C code, enable C formatting for a nicer reading. Signed-off-by:
-
Luca Ceresoli authored
This section lacks links to functions. Add one to simplify reading. Signed-off-by:
-
Luca Ceresoli authored
The code snippet showing how to add controls to the driver’s top-level struct is present twice, but only the second time it is split in the V4L2 and subdev cases. Consolidate everything at the beginning. Also remove the "Where foo->bar is of type struct baz" sentences, this obvious from the code. Signed-off-by:
-
Luca Ceresoli authored
This section lacks links to struct definitions. Add one where each struct is introduced. Signed-off-by:
-
Luca Ceresoli authored
Fix indentation in example C code. Signed-off-by:
-
Luca Ceresoli authored
Mentioning :ref:`VIDIOC_QUERYCTRL` renders all the three related ioctls. Explicitly adding VIDIOC_QUERY_EXT_CTRL and VIDIOC_QUERYMENU will make them render twice, so remove them Signed-off-by:
-
Marek Szyprowski authored
Since the beginning the second clock ('special', 'sclk') was optional and it is not available on some variants of Exynos SoCs (i.e. Exynos5420 with v7 of MFC hardware). However commit 1bce6fb3 ("[media] s5p-mfc: Rework clock handling") made handling of all specified clocks mandatory. This patch restores original behavior of the driver and fixes its operation on Exynos5420 SoCs. Fixes: 1bce6fb3 ("[media] s5p-mfc: Rework clock handling") Signed-off-by:Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Maxime Jourdan authored
Both MESON AO CEC and MESON VIDEO DECODER point to the wrong linux-media mailing list. Update it to linux-media@vger.kernel.org. Signed-off-by:
Maxime Jourdan <mjourdan@baylibre.com> Signed-off-by:
-
Shuah Khan authored
Fix v4l2_fourcc define to use "U" cast to avoid shifting signed 32-bit value by 31 bits problem. This isn't a problem for kernel builds with gcc. This could be problem since this header is part of public API which could be included for builds using compilers that don't handle this condition safely resulting in undefined behavior. Signed-off-by:
Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
-
Shuah Khan authored
Fix MEDIA_ENT_ID_FLAG_NEXT to use "U" cast to avoid shifting signed 32-bit value by 31 bits problem. This isn't a problem for kernel builds with gcc. This could be problem since this header is part of public API which could be included for builds using compilers that don't handle this condition safely resulting in undefined behavior. Signed-off-by:
-
Niklas Söderlund authored
After the rework of the Gen2 file operations it's now trivial to merge the Gen2 and Gen3 versions. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by:
-
Niklas Söderlund authored
The function no longer serve a purpose as most tasks it performed have been refactored, fold what remains of it into the only caller. While at it add error checking for v4l2_ctrl_handler_setup(). Signed-off-by:
-
Niklas Söderlund authored
The two power helpers are now only dealing with the parallel subdevice, merge them into a single rvin_power_parallel() helper to reduce code duplication. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Niklas Söderlund authored
The helpers rvin_power_{on,off} deal with both VIN and the parallel subdevice power. This makes it hard to merge the Gen2 and Gen3 open/release functions. Move the VIN power handling directly to the open/release functions to prepare for the merge. Signed-off-by: -
Niklas Söderlund authored
The format is already synced when the subdevice is bound, there is no need to do do it every time the video device is opened. Signed-off-by:
-
Niklas Söderlund authored
The user should be allowed to break waiting for the lock when opening the video device. Signed-off-by:
-
Niklas Söderlund authored
Runtime PM is already enabled unconditionally when the driver is probed and disabled when it's removed. There is no point in doing it again for Gen2 when opening and closing the video device. Signed-off-by:
-
Niklas Söderlund authored
The driver does not implement runtime resume and suspend function so there is little point in trying to call them. This is a leftover from the drivers soc_camera beginnings. Signed-off-by:
-
Anders Roxell authored
When building with CONFIG_VIDEO_ADV7511 and CONFIG_DRM_I2C_ADV7511 enabled as loadable modules, we see the following warning: drivers/gpu/drm/bridge/adv7511/adv7511.ko drivers/media/i2c/adv7511.ko Rework so that the file is named adv7511-v4l2.c. Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> Signed-off-by:
-
Colin Ian King authored
The pointer mpeg12 is being initialized however that value is never read and mpeg12 is being re-assigned almost immediately afterwards. Remove the redundant initialization. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
-
