This patch adds support for the KT600 to the i2c-viapro driver. It was
confirmed to work by Lou, lm-sensors at fixit dot nospammail dot net in
this post:
http://archives.andrew.net.au/lm-sensors/msg05299.html

This patch adds support for the Serverworks CSB6 to i2c-piix4 driver. It
was confirmed to work by lasirona at yahoo dot com in support ticket
#1424:
http://secure.netroedge.com/~lm78/readticket.cgi?ticket=1424

This patch rehabilitates Alexander Wold as the author of the i2c-savage4
driver. For some reason, his name was not mentioned anywhere in the
first place.

The change was requested by Alexander Wold himself.

Summary of the changes:
adm1021.c: No changes, that chipset uses a real min/max model.
eeeprom.c: No changes (obviously).
it87.c:    Remove buggy comments (obviously taken from via686a) about
           max and min temperature limits being over and hyst. This
           isn't the case for this driver (min/max model).
lm75.c:    Simple sysfs file name change (temp_min to temp_hyst).
lm78.c:    Simple sysfs file name change (temp_min to temp_hyst).
lm85.c:    No changes needed (min/max model).
via686a.c: Rename functions and macros from min/max to hyst/over, what
           it really is. Remove unnecessary comments. Rename sysfs
           files from temp_min[1-3] to temp_hyst[1-3].
w83781d.c: Rename variables from temp_min* to temp_hyst* (needed so
           that the macros keep working). Update macro calls
           accordingly. Fix writing temp to max and hyst being
           swapped.

Additional remarks:

The lm75 and lm78 having a single temperature channel, there is no
number appended to the file names. Shouldn't a "1" be appended in this
case? I think it would make it easier for the future library to catch
all the files.

I made sure the drivers would still compile after the changes, but did
not test them otherwise (no working 2.6.0 kernel here, and not all the
hardware anyway).

1* No more current hysteresis value. I don't think we ever saw a chip
   which monitors current, and if we ever do, I would be very, very
   surprised if it would have an hysteresis value.
2* Temperature input and max can have 4 values. [from the previous
   patch]
3* Split temperature min and hysteresis into two separate files.
4* New file temp_crit. [from previous patch]

The new file temp_crit is subject to change later as we decide more
precisely how we want to handle values that are common to more than one
temperature channels.

Here follows a patch to i2c-algo-bit.c as found in linux-2.6.0-test9,
with two fixes for adapters that cannot read SCL back. Althouth real
adapters should be able to read SCL back, there are some that
cannot, for example the ADM1032 evaluation board I am using. Such
adapters where supposed to be already supported, but I found a probable
bug and improved support.

These changes were applied to our i2c CVS repository two weeks ago and
have been reviewed by Mark D. Studebaker.

List of changes:

* Fix sclhi() for adapters that do not have getscl().
* Enable bit_test for adapters that do not have getscl().
* Mostly rewrite test_bus(), cleaner and probably faster.

into kroah.com:/home/greg/linux/BK/i2c-new_drivers-2.6

This is a patch to writing-clients. The current version in Linux 2.6
still mentions the old module reference counting mechanism. The patch
brings it to the same version we have in i2c CVS, where that section has
been updated.

This is the document I wrote (and you reviewed) about porting client
drivers to Linux 2.6. The retained name is "porting-clients" (in line
with writing-clients). I won't commit it to i2c/lm_sensors2 CVS, since
that document is of no use outside of the 2.6 kernel (and I'm bored
keeping files in sync).

into kroah.com:/home/greg/linux/BK/i2c-new_drivers-2.6

into home.osdl.org:/home/torvalds/v2.5/linux

The pid_alive() check within the loop is incorrect.  If we are within
the tasklist lock and the thread group leader is valid then the thread
chain will be fully intact.

Instead, the check should be _outside_ the loop, since if the group
leader no longer exists, the whole list is gone and we must not try
to access it.

Move the check around, and add comment.

Bug-hunting and fix by Srivatsa Vaddagiri

When doing sync wakeups we must not skip the notification of other cpus
if the task is not on this runqueue.

We need to initialize st->state in tcp_seq_start().  Otherwise
tcp_seq_stop() is run with previous st->state, and it calls the unneeded
unlock etc, causing a kernel crash.

I've got a lot more changes than what's included here.  I've put this
down to the bear minimum to get things working sanely.

Mainly, I just want to get all the people hit by this a chance to use
2.6.0 without having to get our tree. Changes itemized:

 - Fix deadlock possibility in csr.c:read_maps()
 - Fix kmalloc to use ATOMIC in highlevel.c.
 - s/in_interrupt/irqs_disabled/ in ieee1394_transactions.c to fix
   warnings when transactions occured.
 - Introduce a release callback for the host driver and use it correctly.
 - Reorganize the nodemgr probe so we do an initial scan to discover
   devices, check IRM/CycleMaster, then do a final full probe when things
   are kosher. Fixes a problem where device registration and hotplug
   would cause some serious problems when a bus reset was forced in the
   middle of the probe.

into home.osdl.org:/home/torvalds/v2.5/linux

into home.osdl.org:/home/torvalds/v2.5/linux

into home.osdl.org:/home/torvalds/v2.5/linux

There are /proc handles there setup by proc_tty_register_driver, but there is
no module ownership association, so anything that reads after module unload
will blow.

The trivial fix is to propagate the owner of tty_driver to proc entry.

This fixes a small, but important bug in smsc-ircc2.c.

Without this the driver tries release the same region twice.

      Tracked down by Rohit Seth.

Do not special case ENOMEM as an error code, we should free up
the packet for all errors.

Most of the breakage came from cset 1.838.10.3

The br_netfilter_{init,fini}() calls need to be guarded by
BRIDGE_NETFILTER, from Michal Janusz Miroslaw.

When bringing an interface down do not forget to clear the
IF_RS_SENT and IF_RA_RCVD flags.

into home.osdl.org:/home/torvalds/v2.5/linux

This fixes an oops that can occur if JFS is used as the root filesystem.

Writes to a device node may cause a ->write_inode to be called during a
read-only mount.  JFS needs to check for NULL log in jfs_flush_journal. 

into home.osdl.org:/home/torvalds/v2.5/linux

Also, make sure NET_RX_DROP is returned if we did not accept the
packet.

In implementations that use no socket locking, such as RAW sockets,
once we queue the SKB to the socket another cpu can remove the SKB
from the socket queue and free up the SKB making the skb->len access
touch freed memory.

Based upon a report from Burton Windle, kernel bugzilla #937