We were setting the BTRFS_ROOT_SUBVOL_DEAD flag on the root of the
parent of our target snapshot, instead of setting it in the target
snapshot's root.

This is easy to observe by running the following scenario:

    mkfs.btrfs -f /dev/sdd
    mount /dev/sdd /mnt

    btrfs subvolume create /mnt/first_subvol
    btrfs subvolume snapshot -r /mnt /mnt/mysnap1

    btrfs subvolume delete /mnt/first_subvol
    btrfs subvolume snapshot -r /mnt /mnt/mysnap2

    btrfs send -p /mnt/mysnap1 /mnt/mysnap2 -f /tmp/send.data

The send command failed because the send ioctl returned -EPERM.
A test case for xfstests follows.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>

We were cleaning the clone target file range from the page cache before
we did replace the file extent items in the fs tree. This was racy,
as right after cleaning the relevant range from the page cache and before
replacing the file extent items, a read against that range could be
performed by another task and populate again the page cache with stale
data (stale after the cloning finishes). This would result in reads after
the clone operation successfully finishes to get old data (and potentially
for a very long time). Therefore evict the pages after replacing the file
extent items, so that subsequent reads will always get the new data.

Similarly, we were prone to races while cloning the file extent items
because we weren't locking the target range and wait for any existing
ordered extents against that range to complete. It was possible that
after cloning the extent items, a write operation that was performed
before the clone operation and overlaps the same range, would end up
undoing all or part of the work the clone operation did (a worker task
running inode.c:btrfs_finish_ordered_io). Therefore lock the target
range in the io tree, wait for all pending ordered extents against that
range to finish and then safely perform the cloning.

The issue of reading stale data after the clone operation is easy to
reproduce by running the following C program in a loop until it exits
with return value 1.

 #include <unistd.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
 #include <errno.h>
 #include <pthread.h>
 #include <fcntl.h>
 #include <assert.h>
 #include <asm/types.h>
 #include <linux/ioctl.h>
 #include <sys/stat.h>
 #include <sys/types.h>
 #include <sys/ioctl.h>

 #define SRC_FILE "/mnt/sdd/foo"
 #define DST_FILE "/mnt/sdd/bar"
 #define FILE_SIZE (16 * 1024)
 #define PATTERN_SRC 'X'
 #define PATTERN_DST 'Y'

struct btrfs_ioctl_clone_range_args {
	__s64 src_fd;
	__u64 src_offset, src_length;
	__u64 dest_offset;
};

 #define BTRFS_IOCTL_MAGIC 0x94
 #define BTRFS_IOC_CLONE_RANGE _IOW(BTRFS_IOCTL_MAGIC, 13, \
				   struct btrfs_ioctl_clone_range_args)

static pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER;
static int clone_done = 0;
static int reader_ready = 0;
static int stale_data = 0;

static void *reader_loop(void *arg)
{
	char buf[4096], want_buf[4096];

	memset(want_buf, PATTERN_SRC, 4096);
	pthread_mutex_lock(&mutex);
	reader_ready = 1;
	pthread_mutex_unlock(&mutex);

	while (1) {
		int done, fd, ret;

		fd = open(DST_FILE, O_RDONLY);
		assert(fd != -1);

		pthread_mutex_lock(&mutex);
		done = clone_done;
		pthread_mutex_unlock(&mutex);

		ret = read(fd, buf, 4096);
		assert(ret == 4096);
		close(fd);

		if (done) {
			ret = memcmp(buf, want_buf, 4096);
			if (ret == 0) {
				printf("Found new content\n");
			} else {
				printf("Found old content\n");
				pthread_mutex_lock(&mutex);
				stale_data = 1;
				pthread_mutex_unlock(&mutex);
			}
			break;
		}
	}
	return NULL;
}

int main(int argc, char *argv[])
{
	pthread_t reader;
	int ret, i, fd;
	struct btrfs_ioctl_clone_range_args clone_args;
	int fd1, fd2;

	ret = remove(SRC_FILE);
	if (ret == -1 && errno != ENOENT) {
		fprintf(stderr, "Error deleting src file: %s\n", strerror(errno));
		return 1;
	}
	ret = remove(DST_FILE);
	if (ret == -1 && errno != ENOENT) {
		fprintf(stderr, "Error deleting dst file: %s\n", strerror(errno));
		return 1;
	}

	fd = open(SRC_FILE, O_CREAT | O_WRONLY | O_TRUNC, S_IRWXU);
	assert(fd != -1);
	for (i = 0; i < FILE_SIZE; i++) {
		char c = PATTERN_SRC;
		ret = write(fd, &c, 1);
		assert(ret == 1);
	}
	close(fd);
	fd = open(DST_FILE, O_CREAT | O_WRONLY | O_TRUNC, S_IRWXU);
	assert(fd != -1);
	for (i = 0; i < FILE_SIZE; i++) {
		char c = PATTERN_DST;
		ret = write(fd, &c, 1);
		assert(ret == 1);
	}
	close(fd);
        sync();

	ret = pthread_create(&reader, NULL, reader_loop, NULL);
	assert(ret == 0);
	while (1) {
		int r;
		pthread_mutex_lock(&mutex);
		r = reader_ready;
		pthread_mutex_unlock(&mutex);
		if (r) break;
	}

	fd1 = open(SRC_FILE, O_RDONLY);
	if (fd1 < 0) {
		fprintf(stderr, "Error open src file: %s\n", strerror(errno));
		return 1;
	}
	fd2 = open(DST_FILE, O_RDWR);
	if (fd2 < 0) {
		fprintf(stderr, "Error open dst file: %s\n", strerror(errno));
		return 1;
	}
	clone_args.src_fd = fd1;
	clone_args.src_offset = 0;
	clone_args.src_length = 4096;
	clone_args.dest_offset = 0;
	ret = ioctl(fd2, BTRFS_IOC_CLONE_RANGE, &clone_args);
	assert(ret == 0);
	close(fd1);
	close(fd2);

	pthread_mutex_lock(&mutex);
	clone_done = 1;
	pthread_mutex_unlock(&mutex);
	ret = pthread_join(reader, NULL);
	assert(ret == 0);

	pthread_mutex_lock(&mutex);
	ret = stale_data ? 1 : 0;
	pthread_mutex_unlock(&mutex);
	return ret;
}
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>

There is otherwise a risk of a possible null pointer dereference.

Was largely found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Chris Mason <clm@fb.com>

We are currently allocating space_info objects in an array when we
allocate space_info. When a user does something like:

# btrfs balance start -mconvert=raid1 -dconvert=raid1 /mnt
# btrfs balance start -mconvert=single -dconvert=single /mnt -f
# btrfs balance start -mconvert=raid1 -dconvert=raid1 /

We can end up with memory corruption since the kobject hasn't
been reinitialized properly and the name pointer was left set.

The rationale behind allocating them statically was to avoid
creating a separate kobject container that just contained the
raid type. It used the index in the array to determine the index.

Ultimately, though, this wastes more memory than it saves in all
but the most complex scenarios and introduces kobject lifetime
questions.

This patch allocates the kobjects dynamically instead. Note that
we also remove the kobject_get/put of the parent kobject since
kobject_add and kobject_del do that internally.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reported-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>

We were limiting the sum of the xattr name and value lengths to PATH_MAX,
which is not correct, specially on filesystems created with btrfs-progs
v3.12 or higher, where the default leaf size is max(16384, PAGE_SIZE), or
systems with page sizes larger than 4096 bytes.

Xattrs have their own specific maximum name and value lengths, which depend
on the leaf size, therefore use these limits to be able to send xattrs with
sizes larger than PATH_MAX.

A test case for xfstests follows.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>

If we are doing an incremental send and the base snapshot has a
directory with name X that doesn't exist anymore in the second
snapshot and a new subvolume/snapshot exists in the second snapshot
that has the same name as the directory (name X), the incremental
send would fail with -ENOENT error. This is because it attempts
to lookup for an inode with a number matching the objectid of a
root, which doesn't exist.

Steps to reproduce:

    mkfs.btrfs -f /dev/sdd
    mount /dev/sdd /mnt

    mkdir /mnt/testdir
    btrfs subvolume snapshot -r /mnt /mnt/mysnap1

    rmdir /mnt/testdir
    btrfs subvolume create /mnt/testdir
    btrfs subvolume snapshot -r /mnt /mnt/mysnap2

    btrfs send -p /mnt/mysnap1 /mnt/mysnap2 -f /tmp/send.data

A test case for xfstests follows.
Reported-by: Robert White <rwhite@pobox.com>
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>

Delayed extent operations are triggered during transaction commits.
The goal is to queue up a healthly batch of changes to the extent
allocation tree and run through them in bulk.

This farms them off to async helper threads.  The goal is to have the
bulk of the delayed operations being done in the background, but this is
also important to limit our stack footprint.
Signed-off-by: Chris Mason <clm@fb.com>

__extent_writepage has two unrelated parts.  First it does the delayed
allocation dance and second it does the mapping and IO for the page
we're actually writing.

This splits it up into those two parts so the stack from one doesn't
impact the stack from the other.
Signed-off-by: Chris Mason <clm@fb.com>

In these instances, we are trying to determine if a page has been accessed
since we began the operation for the sake of retry.  This is easily
accomplished by doing a gang lookup in the page mapping radix tree, and it
saves us the dependency on the flag (so that we might eventually delete
it).

btrfs_page_exists_in_range borrows heavily from find_get_page, replacing
the radix tree look up with a gang lookup of 1, so that we can find the
next highest page >= index and see if it falls into our lock range.
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Alex Gartrell <agartrell@fb.com>

This adds noinline_for_stack to two helpers used by
btree_write_cache_pages.  It shaves us down from 424 bytes on the
stack to 280.
Signed-off-by: Chris Mason <clm@fb.com>

__btrfs_write_out_cache was one of our stack pigs.  This breaks it
up into helper functions and slims it down to 194 bytes.
Signed-off-by: Chris Mason <clm@fb.com>

Memory leaks are bad mmkay?
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>

I have an opinion that system logs /var/log/messages are
valuable info to investigate the real system issues at
the data center. People handling data center issues
do spend a lot time and efforts analyzing messages
files. Having usage error logged into /var/log/messages
is something we should avoid.
Signed-off-by: Anand Jain <Anand.Jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>

I've noticed an extra line after "use no compression", but search
revealed much more in messages of more critical levels and rare errors.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>

We need to NULL the cached_state after freeing it, otherwise
we might free it again if find_delalloc_range doesn't find anything.
Signed-off-by: Chris Mason <clm@fb.com>
cc: stable@vger.kernel.org

use the newer and more pleasant kstrtoull() to replace simple_strtoull(),
because simple_strtoull() is marked for obsoletion.
Signed-off-by: Zhang Zhen <zhenzhang.zhang@huawei.com>
Signed-off-by: Chris Mason <clm@fb.com>

Seeding device support allows us to create a new filesystem
based on existed filesystem.

However newly created filesystem's @total_devices should include seed
devices. This patch fix the following problem:

 # mkfs.btrfs -f /dev/sdb
 # btrfstune -S 1 /dev/sdb
 # mount /dev/sdb /mnt
 # btrfs device add -f /dev/sdc /mnt --->fs_devices->total_devices = 1
 # umount /mnt
 # mount /dev/sdc /mnt               --->fs_devices->total_devices = 2

This is because we record right @total_devices in superblock, but
@fs_devices->total_devices is reset to be 0 in btrfs_prepare_sprout().

Fix this problem by not resetting @fs_devices->total_devices.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

Even CONFIG_BTRFS_FS_POSIX_ACL is not defined, the acl still could
been enabled using a mount option, and now fs/btrfs/acl.o is not
built, so the mount options will appear to be supported but will
be silently ignored.
Signed-off-by: Guangliang Zhao <lucienchao@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>

This exercises the various parts of the new qgroup accounting code.  We do some
basic stuff and do some things with the shared refs to make sure all that code
works.  I had to add a bunch of infrastructure because I needed to be able to
insert items into a fake tree without having to do all the hard work myself,
hopefully this will be usefull in the future.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>

Currently qgroups account for space by intercepting delayed ref updates to fs
trees.  It does this by adding sequence numbers to delayed ref updates so that
it can figure out how the tree looked before the update so we can adjust the
counters properly.  The problem with this is that it does not allow delayed refs
to be merged, so if you say are defragging an extent with 5k snapshots pointing
to it we will thrash the delayed ref lock because we need to go back and
manually merge these things together.  Instead we want to process quota changes
when we know they are going to happen, like when we first allocate an extent, we
free a reference for an extent, we add new references etc.  This patch
accomplishes this by only adding qgroup operations for real ref changes.  We
only modify the sequence number when we need to lookup roots for bytenrs, this
reduces the amount of churn on the sequence number and allows us to merge
delayed refs as we add them most of the time.  This patch encompasses a bunch of
architectural changes

1) qgroup ref operations: instead of tracking qgroup operations through the
delayed refs we simply add new ref operations whenever we notice that we need to
when we've modified the refs themselves.

2) tree mod seq:  we no longer have this separation of major/minor counters.
this makes the sequence number stuff much more sane and we can remove some
locking that was needed to protect the counter.

3) delayed ref seq: we now read the tree mod seq number and use that as our
sequence.  This means each new delayed ref doesn't have it's own unique sequence
number, rather whenever we go to lookup backrefs we inc the sequence number so
we can make sure to keep any new operations from screwing up our world view at
that given point.  This allows us to merge delayed refs during runtime.

With all of these changes the delayed ref stuff is a little saner and the qgroup
accounting stuff no longer goes negative in some cases like it was before.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>

According to commit 865ffef3
(fs: fix fsync() error reporting),
it's not stable to just check error pages because pages can be
truncated or invalidated, we should also mark mapping with error
flag so that a later fsync can catch the error.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>

Same as normal devices, seed devices should be initialized with
fs_info->dev_root as well, otherwise we'll get a NULL pointer crash.

Cc: Chris Murphy <lists@colorremedies.com>
Reported-by: Chris Murphy <lists@colorremedies.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>

We hit something like the following function call flows:

|->run_delalloc_range()
 |->btrfs_join_transaction()
   |->cow_file_range()
     |->btrfs_join_transaction()
       |->find_free_extent()
         |->btrfs_join_transaction()

Trace infomation can be seen as:

[ 7411.127040] ------------[ cut here ]------------
[ 7411.127060] WARNING: CPU: 0 PID: 11557 at fs/btrfs/transaction.c:383 start_transaction+0x561/0x580 [btrfs]()
[ 7411.127079] CPU: 0 PID: 11557 Comm: kworker/u8:9 Tainted: G           O 3.13.0+ #4
[ 7411.127080] Hardware name: LENOVO QiTianM4350/ , BIOS F1KT52AUS 05/24/2013
[ 7411.127085] Workqueue: writeback bdi_writeback_workfn (flush-btrfs-5)
[ 7411.127092] Call Trace:
[ 7411.127097]  [<ffffffff815b87b0>] dump_stack+0x45/0x56
[ 7411.127101]  [<ffffffff81051ffd>] warn_slowpath_common+0x7d/0xa0
[ 7411.127102]  [<ffffffff810520da>] warn_slowpath_null+0x1a/0x20
[ 7411.127109]  [<ffffffffa0444fb1>] start_transaction+0x561/0x580 [btrfs]
[ 7411.127115]  [<ffffffffa0445027>] btrfs_join_transaction+0x17/0x20 [btrfs]
[ 7411.127120]  [<ffffffffa0431c91>] find_free_extent+0xa21/0xb50 [btrfs]
[ 7411.127126]  [<ffffffffa0431f68>] btrfs_reserve_extent+0xa8/0x1a0 [btrfs]
[ 7411.127131]  [<ffffffffa04322ce>] btrfs_alloc_free_block+0xee/0x440 [btrfs]
[ 7411.127137]  [<ffffffffa043bd6e>] ? btree_set_page_dirty+0xe/0x10 [btrfs]
[ 7411.127142]  [<ffffffffa041da51>] __btrfs_cow_block+0x121/0x530 [btrfs]
[ 7411.127146]  [<ffffffffa041dfff>] btrfs_cow_block+0x11f/0x1c0 [btrfs]
[ 7411.127151]  [<ffffffffa0421b74>] btrfs_search_slot+0x1d4/0x9c0 [btrfs]
[ 7411.127157]  [<ffffffffa0438567>] btrfs_lookup_file_extent+0x37/0x40 [btrfs]
[ 7411.127163]  [<ffffffffa0456bfc>] __btrfs_drop_extents+0x16c/0xd90 [btrfs]
[ 7411.127169]  [<ffffffffa0444ae3>] ? start_transaction+0x93/0x580 [btrfs]
[ 7411.127171]  [<ffffffff811663e2>] ? kmem_cache_alloc+0x132/0x140
[ 7411.127176]  [<ffffffffa041cd9a>] ? btrfs_alloc_path+0x1a/0x20 [btrfs]
[ 7411.127182]  [<ffffffffa044aa61>] cow_file_range_inline+0x181/0x2e0 [btrfs]
[ 7411.127187]  [<ffffffffa044aead>] cow_file_range+0x2ed/0x440 [btrfs]
[ 7411.127194]  [<ffffffffa0464d7f>] ? free_extent_buffer+0x4f/0xb0 [btrfs]
[ 7411.127200]  [<ffffffffa044b38f>] run_delalloc_nocow+0x38f/0xa60 [btrfs]
[ 7411.127207]  [<ffffffffa0461600>] ? test_range_bit+0x30/0x180 [btrfs]
[ 7411.127212]  [<ffffffffa044bd48>] run_delalloc_range+0x2e8/0x350 [btrfs]
[ 7411.127219]  [<ffffffffa04618f9>] ? find_lock_delalloc_range+0x1a9/0x1e0 [btrfs]
[ 7411.127222]  [<ffffffff812a1e71>] ? blk_queue_bio+0x2c1/0x330
[ 7411.127228]  [<ffffffffa0462ad4>] __extent_writepage+0x2f4/0x760 [btrfs]

Here we fix it by avoiding joining transaction again if we have held
a transaction handle when allocating chunk in find_free_extent().
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

To ease finding bugs during development related to modifying btree leaves
in such a way that it makes its items not sorted by key anymore. Since this
is an expensive check, it's only enabled if CONFIG_BTRFS_FS_CHECK_INTEGRITY
is set, which isn't meant to be enabled for regular users.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>

When the csum tree is empty, our leaf (path->nodes[0]) has a number
of items equal to 0 and since btrfs_header_nritems() returns an
unsigned integer (and so is our local nritems variable) the following
comparison always evaluates to false:

     if (path->slots[0] >= nritems - 1) {

As the casting rules lead to:

     if ((u32)0 >= (u32)4294967295) {

This makes us access key at slot paths->slots[0] + 1 (1) of the empty leaf
some lines below:

    btrfs_item_key_to_cpu(path->nodes[0], &found_key, slot);
    if (found_key.objectid != BTRFS_EXTENT_CSUM_OBJECTID ||
        found_key.type != BTRFS_EXTENT_CSUM_KEY) {
		found_next = 1;
		goto insert;
    }

So just don't access such non-existent slot and don't set found_next to 1
when the tree is empty. It's very unlikely we'll get a random key with the
objectid and type values above, which is where we could go into trouble.

If nritems is 0, just set found_next to 1 anyway as it will make us insert
a csum item covering our whole extent (or the whole leaf) when the tree is
empty.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>

In close_ctree(), after we have stopped all workers,there maybe still
some read requests(for example readahead) to submit and this *maybe* trigger
an oops that user reported before:

kernel BUG at fs/btrfs/async-thread.c:619!

By hacking codes, i can reproduce this problem with one cpu available.
We fix this potential problem by invalidating all btree inode pages before
stopping all workers.

Thanks to Miao for pointing out this problem.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>

In btrfs_create_tree(), if btrfs_insert_root() fails, we should
free root->commit_root.
Reported-by: Alex Lyakas <alex@zadarastorage.com>
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

posix_acl_xattr_set() already does the check, and it's the only
way to feed in an ACL from userspace.
So the check here is useless, remove it.
Signed-off-by: zhang zhen <zhenzhang.zhang@huawei.com>
Signed-off-by: Chris Mason <clm@fb.com>

This fix will ensure all SB copies on the disk is zeroed
when the disk is intentionally removed. This helps to
better manage disks in the user land.

This version of patch also merges the Zach patch as below.

 btrfs: don't double brelse on device rm
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Zach Brown <zab@redhat.com>
Signed-off-by: Chris Mason <clm@fb.com>

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

This is a continuation of the previous changes titled:

   Btrfs: fix incremental send's decision to delay a dir move/rename
   Btrfs: part 2, fix incremental send's decision to delay a dir move/rename

There's a few more cases where a directory rename/move must be delayed which was
previously overlooked. If our immediate ancestor has a lower inode number than
ours and it doesn't have a delayed rename/move operation associated to it, it
doesn't mean there isn't any non-direct ancestor of our current inode that needs
to be renamed/moved before our current inode (i.e. with a higher inode number
than ours).

So we can't stop the search if our immediate ancestor has a lower inode number than
ours, we need to navigate the directory hierarchy upwards until we hit the root or:

1) find an ancestor with an higher inode number that was renamed/moved in the send
   root too (or already has a pending rename/move registered);
2) find an ancestor that is a new directory (higher inode number than ours and
   exists only in the send root).

Reproducer for case 1)

    $ mkfs.btrfs -f /dev/sdd
    $ mount /dev/sdd /mnt

    $ mkdir -p /mnt/a/b
    $ mkdir -p /mnt/a/c/d
    $ mkdir /mnt/a/b/e
    $ mkdir /mnt/a/c/d/f
    $ mv /mnt/a/b /mnt/a/c/d/2b
    $ mkdir /mnt/a/x
    $ mkdir /mnt/a/y

    $ btrfs subvolume snapshot -r /mnt /mnt/snap1
    $ btrfs send /mnt/snap1 -f /tmp/base.send

    $ mv /mnt/a/x /mnt/a/y
    $ mv /mnt/a/c/d/2b/e /mnt/a/c/d/2b/2e
    $ mv /mnt/a/c/d /mnt/a/h/2d
    $ mv /mnt/a/c /mnt/a/h/2d/2b/2c

    $ btrfs subvolume snapshot -r /mnt /mnt/snap2
    $ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/incremental.send

Simple reproducer for case 2)

    $ mkfs.btrfs -f /dev/sdd
    $ mount /dev/sdd /mnt

    $ mkdir -p /mnt/a/b
    $ mkdir /mnt/a/c
    $ mv /mnt/a/b /mnt/a/c/b2
    $ mkdir /mnt/a/e

    $ btrfs subvolume snapshot -r /mnt /mnt/snap1
    $ btrfs send /mnt/snap1 -f /tmp/base.send

    $ mv /mnt/a/c/b2 /mnt/a/e/b3
    $ mkdir /mnt/a/e/b3/f
    $ mkdir /mnt/a/h
    $ mv /mnt/a/c /mnt/a/e/b3/f/c2
    $ mv /mnt/a/e /mnt/a/h/e2

    $ btrfs subvolume snapshot -r /mnt /mnt/snap2
    $ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/incremental.send

Another simple reproducer for case 2)

    $ mkfs.btrfs -f /dev/sdd
    $ mount /dev/sdd /mnt

    $ mkdir -p /mnt/a/b
    $ mkdir /mnt/a/c
    $ mkdir /mnt/a/b/d
    $ mkdir /mnt/a/c/e

    $ btrfs subvolume snapshot -r /mnt /mnt/snap1
    $ btrfs send /mnt/snap1 -f /tmp/base.send

    $ mkdir /mnt/a/b/d/f
    $ mkdir /mnt/a/b/g
    $ mv /mnt/a/c/e /mnt/a/b/g/e2
    $ mv /mnt/a/c /mnt/a/b/d/f/c2
    $ mv /mnt/a/b/d/f /mnt/a/b/g/e2/f2

    $ btrfs subvolume snapshot -r /mnt /mnt/snap2
    $ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/incremental.send

More complex reproducer for case 2)

    $ mkfs.btrfs -f /dev/sdd
    $ mount /dev/sdd /mnt

    $ mkdir -p /mnt/a/b
    $ mkdir -p /mnt/a/c/d
    $ mkdir /mnt/a/b/e
    $ mkdir /mnt/a/c/d/f
    $ mv /mnt/a/b /mnt/a/c/d/2b
    $ mkdir /mnt/a/x
    $ mkdir /mnt/a/y

    $ btrfs subvolume snapshot -r /mnt /mnt/snap1
    $ btrfs send /mnt/snap1 -f /tmp/base.send

    $ mv /mnt/a/x /mnt/a/y
    $ mv /mnt/a/c/d/2b/e /mnt/a/c/d/2b/2e
    $ mv /mnt/a/c/d /mnt/a/h/2d
    $ mv /mnt/a/c /mnt/a/h/2d/2b/2c

    $ btrfs subvolume snapshot -r /mnt /mnt/snap2
    $ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/incremental.send

For both cases the incremental send would enter an infinite loop when building
path strings.

While solving these cases, this change also re-implements the code to detect
when directory moves/renames should be delayed. Instead of dealing with several
specific cases separately, it's now more generic handling all cases with a simple
detection algorithm and if when applying a delayed move/rename there's a path loop
detected, it further delays the move/rename registering a new ancestor inode as
the dependency inode (so our rename happens after that ancestor is renamed).

Tests for these cases is being added to xfstests too.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>

Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>

If we have directories with a pending move/rename operation, we must take into
account any orphan directories that got created before executing the pending
move/rename. Those orphan directories are directories with an inode number higher
then the current send progress and that don't exist in the parent snapshot, they
are created before current progress reaches their inode number, with a generated
name of the form oN-M-I and at the root of the filesystem tree, and later when
progress matches their inode number, moved/renamed to their final location.

Reproducer:

          $ mkfs.btrfs -f /dev/sdd
          $ mount /dev/sdd /mnt

          $ mkdir -p /mnt/a/b/c/d
          $ mkdir /mnt/a/b/e
          $ mv /mnt/a/b/c /mnt/a/b/e/CC
          $ mkdir /mnt/a/b/e/CC/d/f
	  $ mkdir /mnt/a/g

          $ btrfs subvolume snapshot -r /mnt /mnt/snap1
          $ btrfs send /mnt/snap1 -f /tmp/base.send

          $ mkdir /mnt/a/g/h
	  $ mv /mnt/a/b/e /mnt/a/g/h/EE
          $ mv /mnt/a/g/h/EE/CC/d /mnt/a/g/h/EE/DD

          $ btrfs subvolume snapshot -r /mnt /mnt/snap2
          $ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/incremental.send

The second receive command failed with the following error:

    ERROR: rename a/b/e/CC/d -> o264-7-0/EE/DD failed. No such file or directory

A test case for xfstests follows soon.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>

Regardless of whether the caller is interested or not in knowing the inode's
generation (dir_gen != NULL), get_first_ref always does a btree lookup to get
the inode item. Avoid this useless lookup if dir_gen parameter is NULL (which
is in some cases).
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>

For RAID0,5,6,10,
For system chunk, there shouldn't be too many stripes to
make a btrfs_chunk that exceeds BTRFS_SYSTEM_CHUNK_ARRAY_SIZE
For data/meta chunk, there shouldn't be too many stripes to
make a btrfs_chunk that exceeds a leaf.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

For system chunk array,
We copy a "disk_key" and an chunk item each time,
so there should be enough space to hold both of them,
not only the chunk item.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

Current btrfs_orphan_cleanup will also cleanup roots which is already in
fs_info->dead_roots without protection.
This will have conditional race with fs_info->cleaner_kthread.

This patch will use refs in root->root_item to detect roots in
dead_roots and avoid conflicts.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

Before applying this patch, the task had to reclaim the metadata space
by itself if the metadata space was not enough. And When the task started
the space reclamation, all the other tasks which wanted to reserve the
metadata space were blocked. At some cases, they would be blocked for
a long time, it made the performance fluctuate wildly.

So we introduce the background metadata space reclamation, when the space
is about to be exhausted, we insert a reclaim work into the workqueue, the
worker of the workqueue helps us to reclaim the reserved space at the
background. By this way, the tasks needn't reclaim the space by themselves at
most cases, and even if the tasks have to reclaim the space or are blocked
for the space reclamation, they will get enough space more quickly.

Here is my test result(Tested by compilebench):
 Memory:	2GB
 CPU:		2Cores * 1CPU
 Partition:	40GB(SSD)

Test command:
 # compilebench -D <mnt> -m

Without this patch:
 intial create total runs 30 avg 54.36 MB/s (user 0.52s sys 2.44s)
 compile total runs 30 avg 123.72 MB/s (user 0.13s sys 1.17s)
 read compiled tree total runs 3 avg 81.15 MB/s (user 0.74s sys 4.89s)
 delete compiled tree total runs 30 avg 5.32 seconds (user 0.35s sys 4.37s)

With this patch:
 intial create total runs 30 avg 59.80 MB/s (user 0.52s sys 2.53s)
 compile total runs 30 avg 151.44 MB/s (user 0.13s sys 1.11s)
 read compiled tree total runs 3 avg 83.25 MB/s (user 0.76s sys 4.91s)
 delete compiled tree total runs 30 avg 5.29 seconds (user 0.34s sys 4.34s)
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>