- 04 Oct, 2023 18 commits
-
-
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski authored
Florian Westphal says: ==================== netfilter patches for net First patch resolves a regression with vlan header matching, this was broken since 6.5 release. From myself. Second patch fixes an ancient problem with sctp connection tracking in case INIT_ACK packets are delayed. This comes with a selftest, both patches from Xin Long. Patch 4 extends the existing nftables audit selftest, from Phil Sutter. Patch 5, also from Phil, avoids a situation where nftables would emit an audit record twice. This was broken since 5.13 days. Patch 6, from myself, avoids spurious insertion failure if we encounter an overlapping but expired range during element insertion with the 'nft_set_rbtree' backend. This problem exists since 6.2. * tag 'nf-23-10-04' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: nft_set_rbtree: fix spurious insertion failure netfilter: nf_tables: Deduplicate nft_register_obj audit logs selftests: netfilter: Extend nft_audit.sh selftests: netfilter: test for sctp collision processing in nf_conntrack netfilter: handle the connecting collision properly in nf_conntrack_proto_sctp netfilter: nft_payload: rebuild vlan header on h_proto access ==================== Link: https://lore.kernel.org/r/20231004141405.28749-1-fw@strlen.deSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Randy Dunlap authored
Correct grammar for better readability. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Jesper Dangaard Brouer <hawk@kernel.org> Reviewed-by:
Simon Horman <horms@kernel.org> Acked-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Link: https://lore.kernel.org/r/20231001003846.29541-1-rdunlap@infradead.orgSigned-off-by:
-
Chengfeng Ye authored
It seems that tipc_crypto_key_revoke() could be be invoked by wokequeue tipc_crypto_work_rx() under process context and timer/rx callback under softirq context, thus the lock acquisition on &tx->lock seems better use spin_lock_bh() to prevent possible deadlock. This flaw was found by an experimental static analysis tool I am developing for irq-related deadlock. tipc_crypto_work_rx() <workqueue> --> tipc_crypto_key_distr() --> tipc_bcast_xmit() --> tipc_bcbase_xmit() --> tipc_bearer_bc_xmit() --> tipc_crypto_xmit() --> tipc_ehdr_build() --> tipc_crypto_key_revoke() --> spin_lock(&tx->lock) <timer interrupt> --> tipc_disc_timeout() --> tipc_bearer_xmit_skb() --> tipc_crypto_xmit() --> tipc_ehdr_build() --> tipc_crypto_key_revoke() --> spin_lock(&tx->lock) <deadlock here> Signed-off-by:
Chengfeng Ye <dg573847474@gmail.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Acked-by:
Jon Maloy <jmaloy@redhat.com> Fixes: fc1b6d6d ("tipc: introduce TIPC encryption & authentication") Link: https://lore.kernel.org/r/20230927181414.59928-1-dg573847474@gmail.comSigned-off-by:
-
Ben Wolsieffer authored
The STM32MP1 keeps clk_rx enabled during suspend, and therefore the driver does not enable the clock in stm32_dwmac_init() if the device was suspended. The problem is that this same code runs on STM32 MCUs, which do disable clk_rx during suspend, causing the clock to never be re-enabled on resume. This patch adds a variant flag to indicate that clk_rx remains enabled during suspend, and uses this to decide whether to enable the clock in stm32_dwmac_init() if the device was suspended. This approach fixes this specific bug with limited opportunity for unintended side-effects, but I have a follow up patch that will refactor the clock configuration and hopefully make it less error prone. Fixes: 6528e02c ("net: ethernet: stmmac: add adaptation for stm32mp157c.") Signed-off-by:
Ben Wolsieffer <ben.wolsieffer@hefring.com> Reviewed-by:
-
Benjamin Poirier authored
Due to a small omission, the offload_failed flag is missing from ipv4 fibmatch results. Make sure it is set correctly. The issue can be witnessed using the following commands: echo "1 1" > /sys/bus/netdevsim/new_device ip link add dummy1 up type dummy ip route add 192.0.2.0/24 dev dummy1 echo 1 > /sys/kernel/debug/netdevsim/netdevsim1/fib/fail_route_offload ip route add 198.51.100.0/24 dev dummy1 ip route # 192.168.15.0/24 has rt_trap # 198.51.100.0/24 has rt_offload_failed ip route get 192.168.15.1 fibmatch # Result has rt_trap ip route get 198.51.100.1 fibmatch # Result differs from the route shown by `ip route`, it is missing # rt_offload_failed ip link del dev dummy1 echo 1 > /sys/bus/netdevsim/del_device Fixes: 36c5100e ("IPv4: Add "offload failed" indication to routes") Signed-off-by:
Benjamin Poirier <bpoirier@nvidia.com> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230926182730.231208-1-bpoirier@nvidia.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessJakub Kicinski authored
Johannes Berg says: ==================== Quite a collection of fixes this time, really too many to list individually. Many stack fixes, even rfkill (found by simulation and the new eevdf scheduler)! Also a bigger maintainers file cleanup, to remove old and redundant information. * tag 'wireless-2023-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (32 commits) wifi: iwlwifi: mvm: Fix incorrect usage of scan API wifi: mac80211: Create resources for disabled links wifi: cfg80211: avoid leaking stack data into trace wifi: mac80211: allow transmitting EAPOL frames with tainted key wifi: mac80211: work around Cisco AP 9115 VHT MPDU length wifi: cfg80211: Fix 6GHz scan configuration wifi: mac80211: fix potential key leak wifi: mac80211: fix potential key use-after-free wifi: mt76: mt76x02: fix MT76x0 external LNA gain handling wifi: brcmfmac: Replace 1-element arrays with flexible arrays wifi: mwifiex: Fix oob check condition in mwifiex_process_rx_packet wifi: rtw88: rtw8723d: Fix MAC address offset in EEPROM rfkill: sync before userspace visibility/changes wifi: mac80211: fix mesh id corruption on 32 bit systems wifi: cfg80211: add missing kernel-doc for cqm_rssi_work wifi: cfg80211: fix cqm_config access race wifi: iwlwifi: mvm: Fix a memory corruption issue wifi: iwlwifi: Ensure ack flag is properly cleared. wifi: iwlwifi: dbg_ini: fix structure packing iwlwifi: mvm: handle PS changes in vif_cfg_changed ... ==================== Link: https://lore.kernel.org/r/20230927095835.25803-2-johannes@sipsolutions.netSigned-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf 2023-10-02 We've added 11 non-merge commits during the last 12 day(s) which contain a total of 12 files changed, 176 insertions(+), 41 deletions(-). The main changes are: 1) Fix BPF verifier to reset backtrack_state masks on global function exit as otherwise subsequent precision tracking would reuse them, from Andrii Nakryiko. 2) Several sockmap fixes for available bytes accounting, from John Fastabend. 3) Reject sk_msg egress redirects to non-TCP sockets given this is only supported for TCP sockets today, from Jakub Sitnicki. 4) Fix a syzkaller splat in bpf_mprog when hitting maximum program limits with BPF_F_BEFORE directive, from Daniel Borkmann and Nikolay Aleksandrov. 5) Fix BPF memory allocator to use kmalloc_size_roundup() to adjust size_index for selecting a bpf_mem_cache, from Hou Tao. 6) Fix arch_prepare_bpf_trampoline return code for s390 JIT, from Song Liu. 7) Fix bpf_trampoline_get when CONFIG_BPF_JIT is turned off, from Leon Hwang. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Use kmalloc_size_roundup() to adjust size_index selftest/bpf: Add various selftests for program limits bpf, mprog: Fix maximum program check on mprog attachment bpf, sockmap: Reject sk_msg egress redirects to non-TCP sockets bpf, sockmap: Add tests for MSG_F_PEEK bpf, sockmap: Do not inc copied_seq when PEEK flag set bpf: tcp_read_skb needs to pop skb regardless of seq bpf: unconditionally reset backtrack_state masks on global func exit bpf: Fix tr dereferencing selftests/bpf: Check bpf_cubic_acked() is called via struct_ops s390/bpf: Let arch_prepare_bpf_trampoline return program size ==================== Link: https://lore.kernel.org/r/20231002113417.2309-1-daniel@iogearbox.netSigned-off-by:
-
Florian Westphal authored
nft_rbtree_gc_elem() walks back and removes the end interval element that comes before the expired element. There is a small chance that we've cached this element as 'rbe_ge'. If this happens, we hold and test a pointer that has been queued for freeing. It also causes spurious insertion failures: $ cat test-testcases-sets-0044interval_overlap_0.1/testout.log Error: Could not process rule: File exists add element t s { 0 - 2 } ^^^^^^ Failed to insert 0 - 2 given: table ip t { set s { type inet_service flags interval,timeout timeout 2s gc-interval 2s } } The set (rbtree) is empty. The 'failure' doesn't happen on next attempt. Reason is that when we try to insert, the tree may hold an expired element that collides with the range we're adding. While we do evict/erase this element, we can trip over this check: if (rbe_ge && nft_rbtree_interval_end(rbe_ge) && nft_rbtree_interval_end(new)) return -ENOTEMPTY; rbe_ge was erased by the synchronous gc, we should not have done this check. Next attempt won't find it, so retry results in successful insertion. Restart in-kernel to avoid such spurious errors. Such restart are rare, unless userspace intentionally adds very large numbers of elements with very short timeouts while setting a huge gc interval. Even in this case, this cannot loop forever, on each retry an existing element has been removed. As the caller is holding the transaction mutex, its impossible for a second entity to add more expiring elements to the tree. After this it also becomes feasible to remove the async gc worker and perform all garbage collection from the commit path. Fixes: c9e6978e ("netfilter: nft_set_rbtree: Switch to node list walk for overlap detection") Signed-off-by:Florian Westphal <fw@strlen.de>
-
Phil Sutter authored
When adding/updating an object, the transaction handler emits suitable audit log entries already, the one in nft_obj_notify() is redundant. To fix that (and retain the audit logging from objects' 'update' callback), Introduce an "audit log free" variant for internal use. Fixes: c520292f ("audit: log nftables configuration change events once per table") Signed-off-by:
Phil Sutter <phil@nwl.cc> Reviewed-by:
Richard Guy Briggs <rgb@redhat.com> Acked-by: Paul Moore <paul@paul-moore.com> (Audit) Signed-off-by:
-
Phil Sutter authored
Add tests for sets and elements and deletion of all kinds. Also reorder rule reset tests: By moving the bulk rule add command up, the two 'reset rules' tests become identical. While at it, fix for a failing bulk rule add test's error status getting lost due to its use in a pipe. Avoid this by using a temporary file. Headings in diff output for failing tests contain no useful data, strip them. Signed-off-by:
-
Xin Long authored
This patch adds a test case to reproduce the SCTP DATA chunk retransmission timeout issue caused by the improper SCTP collision processing in netfilter nf_conntrack_proto_sctp. In this test, client sends a INIT chunk, but the INIT_ACK replied from server is delayed until the server sends a INIT chunk to start a new connection from its side. After the connection is complete from server side, the delayed INIT_ACK arrives in nf_conntrack_proto_sctp. The delayed INIT_ACK should be dropped in nf_conntrack_proto_sctp instead of updating the vtag with the out-of-date init_tag, otherwise, the vtag in DATA chunks later sent by client don't match the vtag in the conntrack entry and the DATA chunks get dropped. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
In Scenario A and B below, as the delayed INIT_ACK always changes the peer vtag, SCTP ct with the incorrect vtag may cause packet loss. Scenario A: INIT_ACK is delayed until the peer receives its own INIT_ACK 192.168.1.2 > 192.168.1.1: [INIT] [init tag: 1328086772] 192.168.1.1 > 192.168.1.2: [INIT] [init tag: 1414468151] 192.168.1.2 > 192.168.1.1: [INIT ACK] [init tag: 1328086772] 192.168.1.1 > 192.168.1.2: [INIT ACK] [init tag: 1650211246] * 192.168.1.2 > 192.168.1.1: [COOKIE ECHO] 192.168.1.1 > 192.168.1.2: [COOKIE ECHO] 192.168.1.2 > 192.168.1.1: [COOKIE ACK] Scenario B: INIT_ACK is delayed until the peer completes its own handshake 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT] [init tag: 144230885] 192.168.1.2 > 192.168.1.1: sctp (1) [INIT ACK] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [COOKIE ECHO] 192.168.1.2 > 192.168.1.1: sctp (1) [COOKIE ACK] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT ACK] [init tag: 3914796021] * This patch fixes it as below: In SCTP_CID_INIT processing: - clear ct->proto.sctp.init[!dir] if ct->proto.sctp.init[dir] && ct->proto.sctp.init[!dir]. (Scenario E) - set ct->proto.sctp.init[dir]. In SCTP_CID_INIT_ACK processing: - drop it if !ct->proto.sctp.init[!dir] && ct->proto.sctp.vtag[!dir] && ct->proto.sctp.vtag[!dir] != ih->init_tag. (Scenario B, Scenario C) - drop it if ct->proto.sctp.init[dir] && ct->proto.sctp.init[!dir] && ct->proto.sctp.vtag[!dir] != ih->init_tag. (Scenario A) In SCTP_CID_COOKIE_ACK processing: - clear ct->proto.sctp.init[dir] and ct->proto.sctp.init[!dir]. (Scenario D) Also, it's important to allow the ct state to move forward with cookie_echo and cookie_ack from the opposite dir for the collision scenarios. There are also other Scenarios where it should allow the packet through, addressed by the processing above: Scenario C: new CT is created by INIT_ACK. Scenario D: start INIT on the existing ESTABLISHED ct. Scenario E: start INIT after the old collision on the existing ESTABLISHED ct. 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT] [init tag: 144230885] (both side are stopped, then start new connection again in hours) 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 242308742] Fixes: 9fb9cbb1 ("[NETFILTER]: Add nf_conntrack subsystem.") Signed-off-by: -
Florian Westphal authored
nft can perform merging of adjacent payload requests. This means that: ether saddr 00:11 ... ether type 8021ad ... is a single payload expression, for 8 bytes, starting at the ethernet source offset. Check that offset+length is fully within the source/destination mac addersses. This bug prevents 'ether type' from matching the correct h_proto in case vlan tag got stripped. Fixes: de6843be ("netfilter: nft_payload: rebuild vlan header when needed") Reported-by:
David Ward <david.ward@ll.mit.edu> Signed-off-by:
-
David Wilder authored
In some OVS environments the TCP pseudo header checksum may need to be recomputed. Currently this is only done when the interface instance is configured for "Trunk Mode". We found the issue also occurs in some Kubernetes environments, these environments do not use "Trunk Mode", therefor the condition is removed. Performance tests with this change show only a fractional decrease in throughput (< 0.2%). Fixes: 7525de25 ("ibmveth: Set CHECKSUM_PARTIAL if NULL TCP CSUM.") Signed-off-by:
David Wilder <dwilder@us.ibm.com> Reviewed-by:
Nick Child <nnac123@linux.ibm.com> Reviewed-by:
David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
The k3_udma_glue_tx_get_irq() function currently returns negative error codes on error, zero on error and positive values for success. This complicates life for the callers who need to propagate the error code. Also GCC will not warn about unsigned comparisons when you check: if (unsigned_irq <= 0) All the callers have been fixed now but let's just make this easy going forward. Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
Roger Quadros <rogerq@kernel.org> Acked-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Dan Carpenter authored
The "tx_chn->irq" variable is unsigned so the error checking does not work correctly. Fixes: 128d5874 ("net: ti: icssg-prueth: Add ICSSG ethernet driver") Signed-off-by:
-
Dan Carpenter authored
This accidentally returns success, but it should return a negative error code. Fixes: 93a76530 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by:
-
Stefano Garzarella authored
In the while loop of vringh_iov_xfer(), `partlen` could be 0 if one of the `iov` has 0 lenght. In this case, we should skip the iov and go to the next one. But calling vringh_kiov_advance() with 0 lenght does not cause the advancement, since it returns immediately if asked to advance by 0 bytes. Let's restore the code that was there before commit b8c06ad4 ("vringh: implement vringh_kiov_advance()"), avoiding using vringh_kiov_advance(). Fixes: b8c06ad4 ("vringh: implement vringh_kiov_advance()") Cc: stable@vger.kernel.org Reported-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
Stefano Garzarella <sgarzare@redhat.com> Acked-by:
-
- 03 Oct, 2023 7 commits
-
-
Yoshihiro Shimoda authored
Fix the MPIC.PSMCS value following the programming example in the section 6.4.2 Management Data Clock (MDC) Setting, Ethernet MAC IP, S4 Hardware User Manual Rev.1.00. The value is calculated by MPIC.PSMCS = clk[MHz] / (MDC frequency[MHz] * 2) - 1 with the input clock frequency from clk_get_rate() and MDC frequency of 2.5MHz. Otherwise, this driver cannot communicate PHYs on the R-Car S4 Starter Kit board. Fixes: 3590918b ("net: ethernet: renesas: Add support for "Ethernet Switch"") Reported-by:Tam Nguyen <tam.nguyen.xa@renesas.com> Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230926123054.3976752-1-yoshihiro.shimoda.uh@renesas.comSigned-off-by:
-
Jeremy Cline authored
The device list needs its associated lock held when modifying it, or the list could become corrupted, as syzbot discovered. Reported-and-tested-by: syzbot+c1d0a03d305972dbbe14@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c1d0a03d305972dbbe14Signed-off-by:
Jeremy Cline <jeremy@jcline.org> Reviewed-by:
-
Parthiban Veerasooran authored
The ETHTOOL_A_PLCA_ENABLED data type is u8. But while parsing the value from the attribute, nla_get_u32() is used in the plca_update_sint() function instead of nla_get_u8(). So plca_cfg.enabled variable is updated with some garbage value instead of 0 or 1 and always enables plca even though plca is disabled through ethtool application. This bug has been fixed by parsing the values based on the attributes type in the policy. Fixes: 8580e16c ("net/ethtool: add netlink interface for the PLCA RS") Signed-off-by:
Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com> Reviewed-by:
-
Gustavo A. R. Silva authored
The flexible structure (a structure that contains a flexible-array member at the end) `qed_ll2_tx_packet` is nested within the second layer of `struct qed_ll2_info`: struct qed_ll2_tx_packet { ... /* Flexible Array of bds_set determined by max_bds_per_packet */ struct { struct core_tx_bd *txq_bd; dma_addr_t tx_frag; u16 frag_len; } bds_set[]; }; struct qed_ll2_tx_queue { ... struct qed_ll2_tx_packet cur_completing_packet; }; struct qed_ll2_info { ... struct qed_ll2_tx_queue tx_queue; struct qed_ll2_cbs cbs; }; The problem is that member `cbs` in `struct qed_ll2_info` is placed just after an object of type `struct qed_ll2_tx_queue`, which is in itself an implicit flexible structure, which by definition ends in a flexible array member, in this case `bds_set`. This causes an undefined behavior bug at run-time when dynamic memory is allocated for `bds_set`, which could lead to a serious issue if `cbs` in `struct qed_ll2_info` is overwritten by the contents of `bds_set`. Notice that the type of `cbs` is a structure full of function pointers (and a cookie :) ): include/linux/qed/qed_ll2_if.h: 107 typedef 108 void (*qed_ll2_complete_rx_packet_cb)(void *cxt, 109 struct qed_ll2_comp_rx_data *data); 110 111 typedef 112 void (*qed_ll2_release_rx_packet_cb)(void *cxt, 113 u8 connection_handle, 114 void *cookie, 115 dma_addr_t rx_buf_addr, 116 bool b_last_packet); 117 118 typedef 119 void (*qed_ll2_complete_tx_packet_cb)(void *cxt, 120 u8 connection_handle, 121 void *cookie, 122 dma_addr_t first_frag_addr, 123 bool b_last_fragment, 124 bool b_last_packet); 125 126 typedef 127 void (*qed_ll2_release_tx_packet_cb)(void *cxt, 128 u8 connection_handle, 129 void *cookie, 130 dma_addr_t first_frag_addr, 131 bool b_last_fragment, bool b_last_packet); 132 133 typedef 134 void (*qed_ll2_slowpath_cb)(void *cxt, u8 connection_handle, 135 u32 opaque_data_0, u32 opaque_data_1); 136 137 struct qed_ll2_cbs { 138 qed_ll2_complete_rx_packet_cb rx_comp_cb; 139 qed_ll2_release_rx_packet_cb rx_release_cb; 140 qed_ll2_complete_tx_packet_cb tx_comp_cb; 141 qed_ll2_release_tx_packet_cb tx_release_cb; 142 qed_ll2_slowpath_cb slowpath_cb; 143 void *cookie; 144 }; Fix this by moving the declaration of `cbs` to the middle of its containing structure `qed_ll2_info`, preventing it from being overwritten by the contents of `bds_set` at run-time. This bug was introduced in 2017, when `bds_set` was converted to a one-element array, and started to be used as a Variable Length Object (VLO) at run-time. Fixes: f5823fe6 ("qed: Add ll2 option to limit the number of bds per packet") Cc: stable@vger.kernel.org Signed-off-by:Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Paolo Abeni <pabeni@redhat.com>
-
Shigeru Yoshida authored
syzbot reported the following uninit-value access issue: ===================================================== BUG: KMSAN: uninit-value in smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:975 [inline] BUG: KMSAN: uninit-value in smsc75xx_bind+0x5c9/0x11e0 drivers/net/usb/smsc75xx.c:1482 CPU: 0 PID: 8696 Comm: kworker/0:3 Not tainted 5.8.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x21c/0x280 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:975 [inline] smsc75xx_bind+0x5c9/0x11e0 drivers/net/usb/smsc75xx.c:1482 usbnet_probe+0x1152/0x3f90 drivers/net/usb/usbnet.c:1737 usb_probe_interface+0xece/0x1550 drivers/usb/core/driver.c:374 really_probe+0xf20/0x20b0 drivers/base/dd.c:529 driver_probe_device+0x293/0x390 drivers/base/dd.c:701 __device_attach_driver+0x63f/0x830 drivers/base/dd.c:807 bus_for_each_drv+0x2ca/0x3f0 drivers/base/bus.c:431 __device_attach+0x4e2/0x7f0 drivers/base/dd.c:873 device_initial_probe+0x4a/0x60 drivers/base/dd.c:920 bus_probe_device+0x177/0x3d0 drivers/base/bus.c:491 device_add+0x3b0e/0x40d0 drivers/base/core.c:2680 usb_set_configuration+0x380f/0x3f10 drivers/usb/core/message.c:2032 usb_generic_driver_probe+0x138/0x300 drivers/usb/core/generic.c:241 usb_probe_device+0x311/0x490 drivers/usb/core/driver.c:272 really_probe+0xf20/0x20b0 drivers/base/dd.c:529 driver_probe_device+0x293/0x390 drivers/base/dd.c:701 __device_attach_driver+0x63f/0x830 drivers/base/dd.c:807 bus_for_each_drv+0x2ca/0x3f0 drivers/base/bus.c:431 __device_attach+0x4e2/0x7f0 drivers/base/dd.c:873 device_initial_probe+0x4a/0x60 drivers/base/dd.c:920 bus_probe_device+0x177/0x3d0 drivers/base/bus.c:491 device_add+0x3b0e/0x40d0 drivers/base/core.c:2680 usb_new_device+0x1bd4/0x2a30 drivers/usb/core/hub.c:2554 hub_port_connect drivers/usb/core/hub.c:5208 [inline] hub_port_connect_change drivers/usb/core/hub.c:5348 [inline] port_event drivers/usb/core/hub.c:5494 [inline] hub_event+0x5e7b/0x8a70 drivers/usb/core/hub.c:5576 process_one_work+0x1688/0x2140 kernel/workqueue.c:2269 worker_thread+0x10bc/0x2730 kernel/workqueue.c:2415 kthread+0x551/0x590 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293 Local variable ----buf.i87@smsc75xx_bind created at: __smsc75xx_read_reg drivers/net/usb/smsc75xx.c:83 [inline] smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:968 [inline] smsc75xx_bind+0x485/0x11e0 drivers/net/usb/smsc75xx.c:1482 __smsc75xx_read_reg drivers/net/usb/smsc75xx.c:83 [inline] smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:968 [inline] smsc75xx_bind+0x485/0x11e0 drivers/net/usb/smsc75xx.c:1482 This issue is caused because usbnet_read_cmd() reads less bytes than requested (zero byte in the reproducer). In this case, 'buf' is not properly filled. This patch fixes the issue by returning -ENODATA if usbnet_read_cmd() reads less bytes than requested. Fixes: d0cad871 ("smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver") Reported-and-tested-by: syzbot+6966546b78d050bb0b5d@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=6966546b78d050bb0b5dSigned-off-by:
Shigeru Yoshida <syoshida@redhat.com> Reviewed-by:
-
Ilya Maximets authored
Commit b0e214d2 ("netfilter: keep conntrack reference until IPsecv6 policy checks are done") is a direct copy of the old commit b59c2701 ("[NETFILTER]: Keep conntrack reference until IPsec policy checks are done") but for IPv6. However, it also copies a bug that this old commit had. That is: when the third packet of 3WHS connection establishment contains payload, it is added into socket receive queue without the XFRM check and the drop of connection tracking context. That leads to nf_conntrack module being impossible to unload as it waits for all the conntrack references to be dropped while the packet release is deferred in per-cpu cache indefinitely, if not consumed by the application. The issue for IPv4 was fixed in commit 6f0012e3 ("tcp: add a missing nf_reset_ct() in 3WHS handling") by adding a missing XFRM check and correctly dropping the conntrack context. However, the issue was introduced to IPv6 code afterwards. Fixing it the same way for IPv6 now. Fixes: b0e214d2 ("netfilter: keep conntrack reference until IPsecv6 policy checks are done") Link: https://lore.kernel.org/netdev/d589a999-d4dd-2768-b2d5-89dec64a4a42@ovn.org/Signed-off-by:
Ilya Maximets <i.maximets@ovn.org> Acked-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230922210530.2045146-1-i.maximets@ovn.orgSigned-off-by:
-
Hangbin Liu authored
After deleting an interface address in fib_del_ifaddr(), the function scans the fib_info list for stray entries and calls fib_flush() and fib_table_flush(). Then the stray entries will be deleted silently and no RTM_DELROUTE notification will be sent. This lack of notification can make routing daemons, or monitor like `ip monitor route` miss the routing changes. e.g. + ip link add dummy1 type dummy + ip link add dummy2 type dummy + ip link set dummy1 up + ip link set dummy2 up + ip addr add 192.168.5.5/24 dev dummy1 + ip route add 7.7.7.0/24 dev dummy2 src 192.168.5.5 + ip -4 route 7.7.7.0/24 dev dummy2 scope link src 192.168.5.5 192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5 + ip monitor route + ip addr del 192.168.5.5/24 dev dummy1 Deleted 192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5 Deleted broadcast 192.168.5.255 dev dummy1 table local proto kernel scope link src 192.168.5.5 Deleted local 192.168.5.5 dev dummy1 table local proto kernel scope host src 192.168.5.5 As Ido reminded, fib_table_flush() isn't only called when an address is deleted, but also when an interface is deleted or put down. The lack of notification in these cases is deliberate. And commit 7c6bb7d2 ("net/ipv6: Add knob to skip DELROUTE message on device down") introduced a sysctl to make IPv6 behave like IPv4 in this regard. So we can't send the route delete notify blindly in fib_table_flush(). To fix this issue, let's add a new flag in "struct fib_info" to track the deleted prefer source address routes, and only send notify for them. After update: + ip monitor route + ip addr del 192.168.5.5/24 dev dummy1 Deleted 192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5 Deleted broadcast 192.168.5.255 dev dummy1 table local proto kernel scope link src 192.168.5.5 Deleted local 192.168.5.5 dev dummy1 table local proto kernel scope host src 192.168.5.5 Deleted 7.7.7.0/24 dev dummy2 scope link src 192.168.5.5 Suggested-by:
Thomas Haller <thaller@redhat.com> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by:
-
- 02 Oct, 2023 3 commits
-
-
Kees Cook authored
In the pathological case of building sky2 with 16k PAGE_SIZE, the frag_addr[] array would never be used, so the original code was correct that size should be 0. But the compiler now gets upset with 0 size arrays in places where it hasn't eliminated the code that might access such an array (it can't figure out that in this case an rx skb with fragments would never be created). To keep the compiler happy, make sure there is at least 1 frag_addr in struct rx_ring_info: In file included from include/linux/skbuff.h:28, from include/net/net_namespace.h:43, from include/linux/netdevice.h:38, from drivers/net/ethernet/marvell/sky2.c:18: drivers/net/ethernet/marvell/sky2.c: In function 'sky2_rx_unmap_skb': include/linux/dma-mapping.h:416:36: warning: array subscript i is outside array bounds of 'dma_addr_t[0]' {aka 'long long unsigned int[]'} [-Warray-bounds=] 416 | #define dma_unmap_page(d, a, s, r) dma_unmap_page_attrs(d, a, s, r, 0) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/marvell/sky2.c:1257:17: note: in expansion of macro 'dma_unmap_page' 1257 | dma_unmap_page(&pdev->dev, re->frag_addr[i], | ^~~~~~~~~~~~~~ In file included from drivers/net/ethernet/marvell/sky2.c:41: drivers/net/ethernet/marvell/sky2.h:2198:25: note: while referencing 'frag_addr' 2198 | dma_addr_t frag_addr[ETH_JUMBO_MTU >> PAGE_SHIFT]; | ^~~~~~~~~ With CONFIG_PAGE_SIZE_16KB=y, PAGE_SHIFT == 14, so: #define ETH_JUMBO_MTU 9000 causes "ETH_JUMBO_MTU >> PAGE_SHIFT" to be 0. Use "?: 1" to solve this build warning. Cc: Mirko Lindner <mlindner@marvell.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Reported-by:kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202309191958.UBw1cjXk-lkp@intel.com/Reviewed-by:
Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by:
-
Fabio Estevam authored
Since commit 23d775f1 ("net: dsa: mv88e6xxx: Wait for EEPROM done before HW reset") the following error is seen on a imx8mn board with a 88E6320 switch: mv88e6085 30be0000.ethernet-1:00: Timeout waiting for EEPROM done This board does not have an EEPROM attached to the switch though. This problem is well explained by Andrew Lunn: "If there is an EEPROM, and the EEPROM contains a lot of data, it could be that when we perform a hardware reset towards the end of probe, it interrupts an I2C bus transaction, leaving the I2C bus in a bad state, and future reads of the EEPROM do not work. The work around for this was to poll the EEInt status and wait for it to go true before performing the hardware reset. However, we have discovered that for some boards which do not have an EEPROM, EEInt never indicates complete. As a result, mv88e6xxx_g1_wait_eeprom_done() spins for a second and then prints a warning. We probably need a different solution than calling mv88e6xxx_g1_wait_eeprom_done(). The datasheet for 6352 documents the EEPROM Command register: bit 15 is: EEPROM Unit Busy. This bit must be set to a one to start an EEPROM operation (see EEOp below). Only one EEPROM operation can be executing at one time so this bit must be zero before setting it to a one. When the requested EEPROM operation completes this bit will automatically be cleared to a zero. The transition of this bit from a one to a zero can be used to generate an interrupt (the EEInt in Global 1, offset 0x00). and more interesting is bit 11: Register Loader Running. This bit is set to one whenever the register loader is busy executing instructions contained in the EEPROM." Change to using mv88e6xxx_g2_eeprom_wait() to fix the timeout error when the EEPROM chip is not present. Fixes: 23d775f1 ("net: dsa: mv88e6xxx: Wait for EEPROM done before HW reset") Suggested-by:
Fabio Estevam <festevam@denx.de> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by:
-
Dinghao Liu authored
When device_add() fails, ptp_ocp_dev_release() will be called after put_device(). Therefore, it seems that the ptp_ocp_dev_release() before put_device() is redundant. Fixes: 773bda96 ("ptp: ocp: Expose various resources on the timecard.") Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by:
Vadim Feodrenko <vadim.fedorenko@linux.dev> Signed-off-by:
-
- 01 Oct, 2023 8 commits
-
-
Jordan Rife authored
Similar to the change in commit 0bdf3993("net: Avoid address overwrite in kernel_connect"), BPF hooks run on bind may rewrite the address passed to kernel_bind(). This change 1) Makes a copy of the bind address in kernel_bind() to insulate callers. 2) Replaces direct calls to sock->ops->bind() in net with kernel_bind() Link: https://lore.kernel.org/netdev/20230912013332.2048422-1-jrife@google.com/ Fixes: 4fbac77d ("bpf: Hooks for sys_bind") Cc: stable@vger.kernel.org Reviewed-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
Jordan Rife <jrife@google.com> Reviewed-by:
-
Jordan Rife authored
Callers of sock_sendmsg(), and similarly kernel_sendmsg(), in kernel space may observe their value of msg_name change in cases where BPF sendmsg hooks rewrite the send address. This has been confirmed to break NFS mounts running in UDP mode and has the potential to break other systems. This patch: 1) Creates a new function called __sock_sendmsg() with same logic as the old sock_sendmsg() function. 2) Replaces calls to sock_sendmsg() made by __sys_sendto() and __sys_sendmsg() with __sock_sendmsg() to avoid an unnecessary copy, as these system calls are already protected. 3) Modifies sock_sendmsg() so that it makes a copy of msg_name if present before passing it down the stack to insulate callers from changes to the send address. Link: https://lore.kernel.org/netdev/20230912013332.2048422-1-jrife@google.com/ Fixes: 1cedee13 ("bpf: Hooks for sys_sendmsg") Cc: stable@vger.kernel.org Reviewed-by:
-
Jordan Rife authored
commit 0bdf3993 ("net: Avoid address overwrite in kernel_connect") ensured that kernel_connect() will not overwrite the address parameter in cases where BPF connect hooks perform an address rewrite. This change replaces direct calls to sock->ops->connect() in net with kernel_connect() to make these call safe. Link: https://lore.kernel.org/netdev/20230912013332.2048422-1-jrife@google.com/ Fixes: d74bad4e ("bpf: Hooks for sys_connect") Cc: stable@vger.kernel.org Reviewed-by:
-
David Howells authored
Including the transhdrlen in length is a problem when the packet is partially filled (e.g. something like send(MSG_MORE) happened previously) when appending to an IPv4 or IPv6 packet as we don't want to repeat the transport header or account for it twice. This can happen under some circumstances, such as splicing into an L2TP socket. The symptom observed is a warning in __ip6_append_data(): WARNING: CPU: 1 PID: 5042 at net/ipv6/ip6_output.c:1800 __ip6_append_data.isra.0+0x1be8/0x47f0 net/ipv6/ip6_output.c:1800 that occurs when MSG_SPLICE_PAGES is used to append more data to an already partially occupied skbuff. The warning occurs when 'copy' is larger than the amount of data in the message iterator. This is because the requested length includes the transport header length when it shouldn't. This can be triggered by, for example: sfd = socket(AF_INET6, SOCK_DGRAM, IPPROTO_L2TP); bind(sfd, ...); // ::1 connect(sfd, ...); // ::1 port 7 send(sfd, buffer, 4100, MSG_MORE); sendfile(sfd, dfd, NULL, 1024); Fix this by only adding transhdrlen into the length if the write queue is empty in l2tp_ip6_sendmsg(), analogously to how UDP does things. l2tp_ip_sendmsg() looks like it won't suffer from this problem as it builds the UDP packet itself. Fixes: a32e0eec ("l2tp: introduce L2TPv3 IP encapsulation support for IPv6") Reported-by: syzbot+62cbf263225ae13ff153@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/0000000000001c12b30605378ce8@google.com/Suggested-by:Willem de Bruijn <willemdebruijn.kernel@gmail.com> Signed-off-by:
David Howells <dhowells@redhat.com> cc: Eric Dumazet <edumazet@google.com> cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> cc: "David S. Miller" <davem@davemloft.net> cc: David Ahern <dsahern@kernel.org> cc: Paolo Abeni <pabeni@redhat.com> cc: Jakub Kicinski <kuba@kernel.org> cc: netdev@vger.kernel.org cc: bpf@vger.kernel.org cc: syzkaller-bugs@googlegroups.com Reviewed-by:
-
Eric Dumazet authored
n->output field can be read locklessly, while a writer might change the pointer concurrently. Add missing annotations to prevent load-store tearing. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Eric Dumazet authored
While looking at a related syzbot report involving neigh_periodic_work(), I found that I forgot to add an annotation when deleting an RCU protected item from a list. Readers use rcu_deference(*np), we need to use either rcu_assign_pointer() or WRITE_ONCE() on writer side to prevent store tearing. I use rcu_assign_pointer() to have lockdep support, this was the choice made in neigh_flush_dev(). Fixes: 767e97e1 ("neigh: RCU conversion of struct neighbour") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothDavid S. Miller authored
bluetooth pull request for net: - Fix handling of HCI_QUIRK_STRICT_DUPLICATE_FILTER - Fix handling of listen for ISO unicast - Fix build warnings - Fix leaking content of local_codecs - Add shutdown function for QCA6174 - Delete unused hci_req_prepare_suspend() declaration - Fix hci_link_tx_to RCU lock usage - Avoid redundant authentication Signed-off-by: -
Clark Wang authored
The second parameter of stmmac_pltfr_init() needs the pointer of "struct plat_stmmacenet_data". So, correct the parameter typo when calling the function. Otherwise, it may cause this alignment exception when doing suspend/resume. [ 49.067201] CPU1 is up [ 49.135258] Internal error: SP/PC alignment exception: 000000008a000000 [#1] PREEMPT SMP [ 49.143346] Modules linked in: soc_imx9 crct10dif_ce polyval_ce nvmem_imx_ocotp_fsb_s400 polyval_generic layerscape_edac_mod snd_soc_fsl_asoc_card snd_soc_imx_audmux snd_soc_imx_card snd_soc_wm8962 el_enclave snd_soc_fsl_micfil rtc_pcf2127 rtc_pcf2131 flexcan can_dev snd_soc_fsl_xcvr snd_soc_fsl_sai imx8_media_dev(C) snd_soc_fsl_utils fuse [ 49.173393] CPU: 0 PID: 565 Comm: sh Tainted: G C 6.5.0-rc4-next-20230804-05047-g5781a6249dae #677 [ 49.183721] Hardware name: NXP i.MX93 11X11 EVK board (DT) [ 49.189190] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 49.196140] pc : 0x80800052 [ 49.198931] lr : stmmac_pltfr_resume+0x34/0x50 [ 49.203368] sp : ffff800082f8bab0 [ 49.206670] x29: ffff800082f8bab0 x28: ffff0000047d0ec0 x27: ffff80008186c170 [ 49.213794] x26: 0000000b5e4ff1ba x25: ffff800081e5fa74 x24: 0000000000000010 [ 49.220918] x23: ffff800081fe0000 x22: 0000000000000000 x21: 0000000000000000 [ 49.228042] x20: ffff0000001b4010 x19: ffff0000001b4010 x18: 0000000000000006 [ 49.235166] x17: ffff7ffffe007000 x16: ffff800080000000 x15: 0000000000000000 [ 49.242290] x14: 00000000000000fc x13: 0000000000000000 x12: 0000000000000000 [ 49.249414] x11: 0000000000000001 x10: 0000000000000a60 x9 : ffff800082f8b8c0 [ 49.256538] x8 : 0000000000000008 x7 : 0000000000000001 x6 : 000000005f54a200 [ 49.263662] x5 : 0000000001000000 x4 : ffff800081b93680 x3 : ffff800081519be0 [ 49.270786] x2 : 0000000080800052 x1 : 0000000000000000 x0 : ffff0000001b4000 [ 49.277911] Call trace: [ 49.280346] 0x80800052 [ 49.282781] platform_pm_resume+0x2c/0x68 [ 49.286785] dpm_run_callback.constprop.0+0x74/0x134 [ 49.291742] device_resume+0x88/0x194 [ 49.295391] dpm_resume+0x10c/0x230 [ 49.298866] dpm_resume_end+0x18/0x30 [ 49.302515] suspend_devices_and_enter+0x2b8/0x624 [ 49.307299] pm_suspend+0x1fc/0x348 [ 49.310774] state_store+0x80/0x104 [ 49.314258] kobj_attr_store+0x18/0x2c [ 49.318002] sysfs_kf_write+0x44/0x54 [ 49.321659] kernfs_fop_write_iter+0x120/0x1ec [ 49.326088] vfs_write+0x1bc/0x300 [ 49.329485] ksys_write+0x70/0x104 [ 49.332874] __arm64_sys_write+0x1c/0x28 [ 49.336783] invoke_syscall+0x48/0x114 [ 49.340527] el0_svc_common.constprop.0+0xc4/0xe4 [ 49.345224] do_el0_svc+0x38/0x98 [ 49.348526] el0_svc+0x2c/0x84 [ 49.351568] el0t_64_sync_handler+0x100/0x12c [ 49.355910] el0t_64_sync+0x190/0x194 [ 49.359567] Code: ???????? ???????? ???????? ???????? (????????) [ 49.365644] ---[ end trace 0000000000000000 ]--- Fixes: 97117eb5 ("net: stmmac: platform: provide stmmac_pltfr_init()") Signed-off-by:
Clark Wang <xiaoning.wang@nxp.com> Reviewed-by:
Serge Semin <fancer.lancer@gmail.com> Signed-off-by:
-
- 30 Sep, 2023 1 commit
-
-
Hou Tao authored
Commit d52b5931 ("bpf: Adjust size_index according to the value of KMALLOC_MIN_SIZE") uses KMALLOC_MIN_SIZE to adjust size_index, but as reported by Nathan, the adjustment is not enough, because __kmalloc_minalign() also decides the minimal alignment of slab object as shown in new_kmalloc_cache() and its value may be greater than KMALLOC_MIN_SIZE (e.g., 64 bytes vs 8 bytes under a riscv QEMU VM). Instead of invoking __kmalloc_minalign() in bpf subsystem to find the maximal alignment, just using kmalloc_size_roundup() directly to get the corresponding slab object size for each allocation size. If these two sizes are unmatched, adjust size_index to select a bpf_mem_cache with unit_size equal to the object_size of the underlying slab cache for the allocation size. Fixes: 822fb26b ("bpf: Add a hint to allocated objects.") Reported-by:
Nathan Chancellor <nathan@kernel.org> Closes: https://lore.kernel.org/bpf/20230914181407.GA1000274@dev-arch.thelio-3990X/Signed-off-by:
Hou Tao <houtao1@huawei.com> Tested-by:
Emil Renner Berthing <emil.renner.berthing@canonical.com> Link: https://lore.kernel.org/r/20230928101558.2594068-1-houtao@huaweicloud.comSigned-off-by:
Alexei Starovoitov <ast@kernel.org>
-
- 29 Sep, 2023 3 commits
-
-
Daniel Borkmann authored
Add various tests to check maximum number of supported programs being attached: # ./vmtest.sh -- ./test_progs -t tc_opts [...] ./test_progs -t tc_opts [ 1.185325] bpf_testmod: loading out-of-tree module taints kernel. [ 1.186826] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel [ 1.270123] tsc: Refined TSC clocksource calibration: 3407.988 MHz [ 1.272428] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fc932722, max_idle_ns: 440795381586 ns [ 1.276408] clocksource: Switched to clocksource tsc #252 tc_opts_after:OK #253 tc_opts_append:OK #254 tc_opts_basic:OK #255 tc_opts_before:OK #256 tc_opts_chain_classic:OK #257 tc_opts_chain_mixed:OK #258 tc_opts_delete_empty:OK #259 tc_opts_demixed:OK #260 tc_opts_detach:OK #261 tc_opts_detach_after:OK #262 tc_opts_detach_before:OK #263 tc_opts_dev_cleanup:OK #264 tc_opts_invalid:OK #265 tc_opts_max:OK <--- (new test) #266 tc_opts_mixed:OK #267 tc_opts_prepend:OK #268 tc_opts_replace:OK #269 tc_opts_revision:OK Summary: 18/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20230929204121.20305-2-daniel@iogearbox.net
-
Daniel Borkmann authored
After Paul's recent improvement to syzkaller to improve coverage for bpf_mprog and tcx, it hit a splat that the program limit was surpassed. What happened is that the maximum number of progs got added, followed by another prog add request which adds with BPF_F_BEFORE flag relative to the last program in the array. The idx >= bpf_mprog_max() check in bpf_mprog_attach() still passes because the index is below the maximum but the maximum will be surpassed. We need to add a check upfront for insertions to catch this situation. Fixes: 053c8e1f ("bpf: Add generic attach/detach/query API for multi-progs") Reported-by: syzbot+baa44e3dbbe48e05c1ad@syzkaller.appspotmail.com Reported-by: syzbot+b97d20ed568ce0951a06@syzkaller.appspotmail.com Reported-by: syzbot+2558ca3567a77b7af4e3@syzkaller.appspotmail.com Co-developed-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
-
Jakub Sitnicki authored
With a SOCKMAP/SOCKHASH map and an sk_msg program user can steer messages sent from one TCP socket (s1) to actually egress from another TCP socket (s2): tcp_bpf_sendmsg(s1) // = sk_prot->sendmsg tcp_bpf_send_verdict(s1) // __SK_REDIRECT case tcp_bpf_sendmsg_redir(s2) tcp_bpf_push_locked(s2) tcp_bpf_push(s2) tcp_rate_check_app_limited(s2) // expects tcp_sock tcp_sendmsg_locked(s2) // ditto There is a hard-coded assumption in the call-chain, that the egress socket (s2) is a TCP socket. However in commit 122e6c79 ("sock_map: Update sock type checks for UDP") we have enabled redirects to non-TCP sockets. This was done for the sake of BPF sk_skb programs. There was no indention to support sk_msg send-to-egress use case. As a result, attempts to send-to-egress through a non-TCP socket lead to a crash due to invalid downcast from sock to tcp_sock: BUG: kernel NULL pointer dereference, address: 000000000000002f ... Call Trace: <TASK> ? show_regs+0x60/0x70 ? __die+0x1f/0x70 ? page_fault_oops+0x80/0x160 ? do_user_addr_fault+0x2d7/0x800 ? rcu_is_watching+0x11/0x50 ? exc_page_fault+0x70/0x1c0 ? asm_exc_page_fault+0x27/0x30 ? tcp_tso_segs+0x14/0xa0 tcp_write_xmit+0x67/0xce0 __tcp_push_pending_frames+0x32/0xf0 tcp_push+0x107/0x140 tcp_sendmsg_locked+0x99f/0xbb0 tcp_bpf_push+0x19d/0x3a0 tcp_bpf_sendmsg_redir+0x55/0xd0 tcp_bpf_send_verdict+0x407/0x550 tcp_bpf_sendmsg+0x1a1/0x390 inet_sendmsg+0x6a/0x70 sock_sendmsg+0x9d/0xc0 ? sockfd_lookup_light+0x12/0x80 __sys_sendto+0x10e/0x160 ? syscall_enter_from_user_mode+0x20/0x60 ? __this_cpu_preempt_check+0x13/0x20 ? lockdep_hardirqs_on+0x82/0x110 __x64_sys_sendto+0x1f/0x30 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Reject selecting a non-TCP sockets as redirect target from a BPF sk_msg program to prevent the crash. When attempted, user will receive an EACCES error from send/sendto/sendmsg() syscall. Fixes: 122e6c79 ("sock_map: Update sock type checks for UDP") Signed-off-by:Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20230920102055.42662-1-jakub@cloudflare.com
-
