- 23 May, 2013 3 commits
-
-
Emilio López authored
Commit bfd428da ("net: ethernet: sun: initialize variables directly") dropped the only loop that was using i but did not remove the actual variable, therefore causing a warning when building. This patch drops the now redundant line. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Emilio López authored
Commit e998fd41 ("net: ethernet: korina: initialize variables directly") dropped the only loop that was using i but did not remove the actual variable, therefore causing a warning when building. This patch drops the now redundant line. Signed-off-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Emilio López authored
Commit 3b0aaef8 ("net: ethernet: apple: initialize variables directly") dropped the only loop that was using i but did not remove the actual variable, therefore causing a warning when building. This patch drops the now redundant line. Signed-off-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 22 May, 2013 13 commits
-
-
Hans-Christoph Schemmel authored
Added support for Cinterion's PLxx WWAN Interface by adding QMI_FIXED_INTF with Cinterion's Vendor ID as well as Product ID and WWAN Interface Number. Signed-off-by: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com> Signed-off-by: Christian Schmiedl <christian.schmiedl@gemalto.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ben Hutchings says: ==================== Somewhat surprisingly, the net_dropmonitor reporting script doesn't work at all. This series fixes it and then makes it slightly more efficient. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Neil Horman <nhorman@tuxdriver.com>
-
Ben Hutchings authored
We can read /proc/kallsyms in a fraction of a second, so why waste a further fraction of a second showing progress? Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Hutchings authored
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Hutchings authored
The sort order of dictionaries in Python is undocumented. Use tuples instead, which are documented to be lexically ordered. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Hutchings authored
The comparison between traced and symbol addresses is backwards: if the traced address doesn't exactly match a symbol (which we don't expect it to), we'll show the next symbol and the offset to it, whereas we should show the previous symbol and the offset from it. Cc: stable@vger.kernel.org Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Hutchings authored
This works much better if we don't treat protocol numbers as addresses. Cc: stable@vger.kernel.org Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shawn Guo authored
MVF is a family while MVF600 is a particular SoC in the family. We generally prefer to use SoC rather than family name in compatible string to define a particular type of fec device. And this is how fec_dt_ids works for all those IMX fec variants. Let's change mvf to mvf600 to have it work in the same way. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shahed Shaikh authored
o After change in EPORT features of 82xx adapter, netdev->features needs to be updated to reflect EPORT feature updates but driver was manipulating netdev->features at wrong place. o This patch uses netdev_update_features() and .ndo_fix_features() to update netdev->features properly. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sony Chacko authored
Code is removed because netdev->trans_start updates made by the driver will be ignored by the kernel. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sony Chacko authored
Fix error paths in probe to assign proper error codes to probe return value. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nithin Sujir authored
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nithin Sujir authored
After resetting the device, the driver waits for a signature to be updated to know that firmware has completed initialization. However, the call to tg3_poll_fw() is being done too late and we're writing to the GRC_MODE register before it has completely initialized, causing contention with firmware. This logic has existed since day one but is causing PCIE link to go down randomly at startup on one platform once every few hundred reboots. Move the tg3_poll_fw() up to before we write to the GRC_MODE register after reset. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 20 May, 2013 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessDavid S. Miller authored
John W. Linville says: ==================== This pull request is intended for the 3.10 series. It contains a variety of fixes for problems discovered during the merge window and after 3.10-rc1. For the mac80211 bits, Johannes says the following: "This is what I have: * a patch from Felix to fix RCU usage in his rate table code * a patch from Ilan to add the wdev id to some notifications so they can actually be used by userspace * Sasha Levin found an issue in how hwsim handles devices * a fix for a bug in the wiphy_register() error path that's been there forever * three fixes for WoWLAN * AP mode frame matching was erroneously giving frames to all virtual AP interfaces (reported by Jouni) * a fix for HT handling in my CSA changes, found by Sujith * a fix for some locking simplifications gone wrong * Ben Greear found more cfg80211/mac80211 state confusion * and a fix for another bug found by Jouni: local state changes need to be reported by mac80211 to cfg80211 so it disconnects properly." And for the iwlwifi bits, he says: "I have fixes for a firmware crash during resume, multicast RX, aggregation and a workaround for a firmware scanning bug." Along with those... Albert Pool adds a USB ID to the rtl8192cu driver. Arend van Spriel restores a driver option support flag that had been removed from 3.9 due to a bug in that version of the driver. Felix Fietkau fixes a trio of ath9k issues with a series of small patches. Geert Uytterhoeven provides a Kconfig fix for ath9k (which you also merged, so it isn't in the diff here). Larry Finger gives us a fix for a build warning on big-endian systems for rtlwifi. Rafał Miłecki adds some core IDs to the bcma driver. Sujith Manoharan fixes a module unloading crash in ath9k, and corrects some calibration settings for AR9485. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
This patch cures transmit timeout's with DHCP observed while running under KVM. When the transmit ring is cleaned out, the Byte Queue Limit values need to be reset. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petko Manolov authored
This patch fixes a potential race with concurrently running asynchronous write requests. The values for device's RX control register are now stored in dynamically allocated buffers so each URB submission has it's own copy. Doing it the old way is data clobbering prone. This patch is against latest 'net' tree. Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
In get_capi_ctr_by_nr() and get_capi_appl_by_nr() the parameter comes from skb->data. The current code can underflow to one space before the start of the array. The sanity check isn't needed in __get_capi_appl_by_nr() but I changed it to match the others. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
-
Yuval Mintz authored
Starting with commit 91226790 `bnx2x: use FW 7.8.17', the bnx2x driver no longer requests the FW to perform IP checksums for IPv4 packets. This behaviour needs to be revised for 57710/57711 chips - when using GSO, if the driver will not set the IP checksum flag then packets will be transmitted by the chip without a valid IP checksum, resulting in a drop of all such packets on the receiver-side. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Another fix needed in ipgre_err(), as parse_gre_header() might change skb->head. Bug added in commit c5441932 (GRE: Refactor GRE tunneling code.) Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
françois romieu authored
8168evl offloaded checksums are wrong since commit e5195c1f ("r8169: fix 8168evl frame padding.") pads small packets to 60 bytes (without ethernet checksum). Typical symptoms appear as UDP checksums which are wrong by the count of added bytes. It isn't worth compensating. Let the driver checksum. Due to the skb length changes, TSO code is moved before the Tx descriptor gets written. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
nikolay@redhat.com authored
When bond_3ad_get_active_agg_info() is used in all show_ad_ functions it is not protected against slave manipulation and since it walks over the slaves and uses them, this can easily result in NULL pointer dereference or use of freed memory. Both the new wrapper and the internal function are exported to the bonding as they're needed in different places. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
nikolay@redhat.com authored
When getting arp_ip_targets if we encounter a bad IP, arp_ip_count still gets increased and all the targets after the wrong one will not be probed if arp_interval is enabled after that (unless a new IP target is added through sysfs) because of the zero entry, in this case reading arp_ip_target through sysfs will show valid targets even if there's a zero entry. Example: 1.2.3.4,4.5.6.7,blah,5.6.7.8 When retrieving the list from arp_ip_target the output would be: 1.2.3.4,4.5.6.7,5.6.7.8 but there will be a 0 entry between 4.5.6.7 and 5.6.7.8. If arp_interval is enabled after that 5.6.7.8 will never be checked because of that. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
nikolay@redhat.com authored
There're few pr_debug() places that can provide the IPv4 address in dotted decimal format instead which is more helpful. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
nikolay@redhat.com authored
Changing the mode without any locking can result in multiple races (e.g. upping a bond, enslaving/releasing). Depending on which race is hit the impact can vary from incosistent bond state to kernel crash. Use RTNL to synchronize the mode setting with the dangerous races. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 19 May, 2013 2 commits
-
-
Chen Gang authored
'discovery->data.info' length is 22, NICKNAME_MAX_LEN is 21, so the strncpy() will always left the last byte of 'discovery->data.info' uninitialized. When 'text' length is longer than 21 (NICKNAME_MAX_LEN), if still left the last byte of 'discovery->data.info' uninitialized, the next strlen() will cause issue. Also 'discovery->data' is 'struct irda_device_info' which defined in "include/uapi/...", it may copy to user mode, so need whole initialized. All together, need use kzalloc() instead of kmalloc() to initialize all members firstly. Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paul Moore authored
The net/netlabel/netlabel_domainhash.c:netlbl_domhsh_add() function does not properly validate new domain hash entries resulting in potential problems when an administrator attempts to add an invalid entry. One such problem, as reported by Vlad Halilov, is a kernel BUG (found in netlabel_domainhash.c:netlbl_domhsh_audit_add()) when adding an IPv6 outbound mapping with a CIPSO configuration. This patch corrects this problem by adding the necessary validation code to netlbl_domhsh_add() via the newly created netlbl_domhsh_validate() function. Ideally this patch should also be pushed to the currently active -stable trees. Reported-by: Vlad Halilov <vlad.halilov@gmail.com> Signed-off-by: Paul Moore <pmoore@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 18 May, 2013 3 commits
-
-
Eric Dumazet authored
commit 0178b695 ("ipv6: Copy cork options in ip6_append_data") added some code duplication and bad error recovery, leading to potential crash in ip6_cork_release() as kfree() could be called with garbage. use kzalloc() to make sure this wont happen. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Neal Cardwell <ncardwell@google.com>
-
Sridhar Samudrala authored
Fix some instances where vxlan fdb 'used' field is not updated after the entry is used. v2: rename vxlan_find_mac() as __vxlan_find_mac() and create a new vxlan_find_mac() that also updates ->used field. Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
Add the missing iounmap() before return from gianfar_ptp_probe() in the error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 17 May, 2013 7 commits
-
-
Felix Fietkau authored
After a tx attempt, an A-MPDU subframe can still have fi->retries at 0 (if the retry count wasn't incremented due to powersave). In that case it is still tracked as part of the block ack window, so when draining the tid queue, its sequence number needs to be cleared from the pending frame bitmap. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
This patch fixes some issues introduced in the rate control API rework. When not running aggregation, copy bf->rates into info->control.rates before applying the rate control status to it. In ath_lookup_rate, the rates need to be pulled from bf->rates, not the tx info. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
When aggregation stop is requested, don't run the mac80211 aggregation stop callback yet, while the session is still blocked. Also, when aggregation flush is requested, don't run the callback at all. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith Manoharan authored
Manual peak calibration is currently enabled only for AR9462 and AR9565. This is also required for AR9485. The initvals are also modified to disable HW peak calibration. Cc: <stable@vger.kernel.org> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Albert Pool authored
This adds the USB ID of the On Networks N300MA, clone of Netgear WNA3100M. Signed-off-by: Albert Pool <albertpool@solcon.nl> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-by: Ana Rey <Anazul77@hotmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Arend van Spriel authored
P2P_DEVICE support was removed from brcmfmac for v3.9 kernel with the commit below: commit 1527c343 Author: Arend van Spriel <arend@broadcom.com> Date: Thu Apr 4 12:10:11 2013 +0200 brcmfmac: remove advertising P2P device support However, it got merged into wireless-next. But for 3.10 brcmfmac does support P2P device. Putting it back with this commit. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
In http://lkml.indiana.edu/hypermail/linux/kernel/1305.1/index.html, Geert Uytterhoeven reports a new warning when building 3.10-rc1 in this driver. This is caused by using a "#if" test to see if __LITTLE_ENDIAN is set, which fails for all big-endian systems. Change to "ifdef". Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-