- 15 Sep, 2017 40 commits
-
-
Ben Hutchings authored
Extracted from upstream commit bd8a7036 "gre: fix a possible skb leak". This patch adds a kfree_skb_list() helper. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Sean Young authored
commit 963761a0 upstream. A rc device can call ir_raw_event_handle() after rc_allocate_device(), but before rc_register_device() has completed. This is racey because rcdev->raw is set before rcdev->raw->thread has a valid value. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> [bwh: Backported to 3.2: adjust filename, context, indentation] Signed-off-by:
-
Thomas Gleixner authored
commit ff86bf0c upstream. The alarmtimer code has another source of potentially rearming itself too fast. Interval timers with a very samll interval have a similar CPU hog effect as the previously fixed overflow issue. The reason is that alarmtimers do not implement the normal protection against this kind of problem which the other posix timer use: timer expires -> queue signal -> deliver signal -> rearm timer This scheme brings the rearming under scheduler control and prevents permanently firing timers which hog the CPU. Bringing this scheme to the alarm timer code is a major overhaul because it lacks all the necessary mechanisms completely. So for a quick fix limit the interval to one jiffie. This is not problematic in practice as alarmtimers are usually backed by an RTC for suspend which have 1 second resolution. It could be therefor argued that the resolution of this clock should be set to 1 second in general, but that's outside the scope of this fix. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Kostya Serebryany <kcc@google.com> Cc: syzkaller <syzkaller@googlegroups.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Dmitry Vyukov <dvyukov@google.com> Link: http://lkml.kernel.org/r/20170530211655.896767100@linutronix.de [bwh: Backported to 3.2: - Use ktime_to_ns()/ktime_set() as ktime_t is not scalar - Adjust context] Signed-off-by:
-
Thomas Gleixner authored
commit f4781e76 upstream. Andrey reported a alartimer related RCU stall while fuzzing the kernel with syzkaller. The reason for this is an overflow in ktime_add() which brings the resulting time into negative space and causes immediate expiry of the timer. The following rearm with a small interval does not bring the timer back into positive space due to the same issue. This results in a permanent firing alarmtimer which hogs the CPU. Use ktime_add_safe() instead which detects the overflow and clamps the result to KTIME_SEC_MAX. Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
Julius Werner authored
commit 32829da5 upstream. A recent fix to /dev/mem prevents mappings from wrapping around the end of physical address space. However, the check was written in a way that also prevents a mapping reaching just up to the end of physical address space, which may be a valid use case (especially on 32-bit systems). This patch fixes it by checking the last mapped address (instead of the first address behind that) for overflow. Fixes: b299cde2 ("drivers: char: mem: Check for address space wraparound with mmap()") Reported-by:
Nico Huber <nico.h@gmx.de> Signed-off-by:
Julius Werner <jwerner@chromium.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Ben Hutchings authored
commit 6e80ac5c upstream. xfrm6_find_1stfragopt() may now return an error code and we must not treat it as a length. Fixes: 2423496a ("ipv6: Prevent overrun when parsing v6 header options") Signed-off-by:
Craig Gallek <kraig@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Thinh Nguyen authored
commit dc9217b6 upstream. f_mass_storage has a memorry barrier issue with the sleep and wake functions that can cause a deadlock. This results in intermittent hangs during MSC file transfer. The host will reset the device after receiving no response to resume the transfer. This issue is seen when dwc3 is processing 2 transfer-in-progress events at the same time, invoking completion handlers for CSW and CBW. Also this issue occurs depending on the system timing and latency. To increase the chance to hit this issue, you can force dwc3 driver to wait and process those 2 events at once by adding a small delay (~100us) in dwc3_check_event_buf() whenever the request is for CSW and read the event count again. Avoid debugging with printk and ftrace as extra delays and memory barrier will mask this issue. Scenario which can lead to failure: ----------------------------------- 1) The main thread sleeps and waits for the next command in get_next_command(). 2) bulk_in_complete() wakes up main thread for CSW. 3) bulk_out_complete() tries to wake up the running main thread for CBW. 4) thread_wakeup_needed is not loaded with correct value in sleep_thread(). 5) Main thread goes to sleep again. The pattern is shown below. Note the 2 critical variables. * common->thread_wakeup_needed * bh->state CPU 0 (sleep_thread) CPU 1 (wakeup_thread) ============================== =============================== bh->state = BH_STATE_FULL; smp_wmb(); thread_wakeup_needed = 0; thread_wakeup_needed = 1; smp_rmb(); if (bh->state != BH_STATE_FULL) sleep again ... As pointed out by Alan Stern, this is an R-pattern issue. The issue can be seen when there are two wakeups in quick succession. The thread_wakeup_needed can be overwritten in sleep_thread, and the read of the bh->state maybe reordered before the write to thread_wakeup_needed. This patch applies full memory barrier smp_mb() in both sleep_thread() and wakeup_thread() to ensure the order which the thread_wakeup_needed and bh->state are written and loaded. However, a better solution in the future would be to use wait_queue method that takes care of managing memory barrier between waker and waiter. Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Thinh Nguyen <thinhn@synopsys.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> [bwh: Backported to 3.2: adjust filename] Signed-off-by:
-
Russell King authored
commit 898805e0 upstream. The Marvell driver incorrectly provides phydev->lp_advertising as the logical and of the link partner's advert and our advert. This is incorrect - this field is supposed to store the link parter's unmodified advertisment. This allows ethtool to report the correct link partner auto-negotiation status. Fixes: be937f1f ("Marvell PHY m88e1111 driver fix") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Jan Kara authored
commit 67a7d5f5 upstream. Currently, extent manipulation operations such as hole punch, range zeroing, or extent shifting do not record the fact that file data has changed and thus fdatasync(2) has a work to do. As a result if we crash e.g. after a punch hole and fdatasync, user can still possibly see the punched out data after journal replay. Test generic/392 fails due to these problems. Fix the problem by properly marking that file data has changed in these operations. Fixes: a4bb6b64Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> [bwh: Backported to 3.2: Only the punch-hole operation is supported, and it's in extents.c.] Signed-off-by:
-
Jan Kara authored
commit a056bdaa upstream. mpage_submit_page() can race with another process growing i_size and writing data via mmap to the written-back page. As mpage_submit_page() samples i_size too early, it may happen that ext4_bio_write_page() zeroes out too large tail of the page and thus corrupts user data. Fix the problem by sampling i_size only after the page has been write-protected in page tables by clear_page_dirty_for_io() call. Reported-by:
Michael Zimmer <michael@swarm64.com> Fixes: cb20d518Signed-off-by:
-
Uwe Kleine-König authored
commit 82533ad9 upstream. The function ax_init_dev (which is called only from the driver's .probe function) calls free_irq in the error path without having requested the irq in the first place. So drop the free_irq call in the error path. Fixes: 825a2ff1 ("AX88796 network driver") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Johannes Thumshirn authored
commit ddff7ed4 upstream. When pci_enable_device() or pci_enable_device_mem() fail in qla2x00_probe_one() we bail out but do a call to pci_disable_device(). This causes the dev_WARN_ON() in pci_disable_device() to trigger, as the device wasn't enabled previously. So instead of taking the 'probe_out' error path we can directly return *iff* one of the pci_enable_device() calls fails. Additionally rename the 'probe_out' goto label's name to the more descriptive 'disable_device'. Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Fixes: e315cd28 ("[SCSI] qla2xxx: Code changes for qla data structure refactoring") Reviewed-by:
Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by:
Giridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Takashi Iwai authored
commit 4efda5f2 upstream. soc_cleanup_card_resources() call snd_card_free() at the last of its procedure. This turned out to lead to a use-after-free. PCM runtimes have been already removed via soc_remove_pcm_runtimes(), while it's dereferenced later in soc_pcm_free() called via snd_card_free(). The fix is simple: just move the snd_card_free() call to the beginning of the whole procedure. This also gives another benefit: it guarantees that all operations have been shut down before actually releasing the resources, which was racy until now. Reported-and-tested-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Mark Brown <broonie@kernel.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Liping Zhang authored
commit fefa9267 upstream. If nf_conntrack_htable_size was adjusted by the user during the ct dump operation, we may invoke nf_ct_put twice for the same ct, i.e. the "last" ct. This will cause the ct will be freed but still linked in hash buckets. It's very easy to reproduce the problem by the following commands: # while : ; do echo $RANDOM > /proc/sys/net/netfilter/nf_conntrack_buckets done # while : ; do conntrack -L done # iperf -s 127.0.0.1 & # iperf -c 127.0.0.1 -P 60 -t 36000 After a while, the system will hang like this: NMI watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [bash:20184] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [iperf:20382] ... So at last if we find cb->args[1] is equal to "last", this means hash resize happened, then we can set cb->args[1] to 0 to fix the above issue. Fixes: d205dc40 ("[NETFILTER]: ctnetlink: fix deadlock in table dumping") Signed-off-by:
Liping Zhang <zlpnobody@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Alexander Sverdlin authored
commit 0037ae47 upstream. The current buffer is being reset to zero on device_free_chan_resources() but not on device_terminate_all(). It could happen that HW is restarted and expects BASE0 to be used, but the driver is not synchronized and will start from BASE1. One solution is to reset the buffer explicitly in m2p_hw_setup(). Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Patrik Jakobsson authored
commit 82bc9a42 upstream. With LVDS we were incorrectly picking the pre-programmed mode instead of the prefered mode provided by VBT. Make sure we pick the VBT mode if one is provided. It is likely that the mode read-out code is still wrong but this patch fixes the immediate problem on most machines. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78562Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170418114332.12183-1-patrik.r.jakobsson@gmail.com [bwh: Backported to 3.2: adjust filename] Signed-off-by:
-
Dan Carpenter authored
commit 293dffaa upstream. If there is not enough space then ceph_decode_32_safe() does a goto bad. We need to return an error code in that situation. The current code returns ERR_PTR(0) which is NULL. The callers are not expecting that and it results in a NULL dereference. Fixes: f24e9980 ("ceph: OSD client") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Dan Carpenter authored
commit 7bd897cf upstream. We don't set an error code on this path. It means that we return NULL instead of an error pointer and the caller does a NULL dereference. Fixes: 6d1d8050 ("block, partition: add partition_meta_info to hd_struct") Signed-off-by:
Jens Axboe <axboe@fb.com> [bwh: Backported to 3.2: adjust filename] Signed-off-by:
-
Alexander Tsoy authored
commit 1fc2e41f upstream. This model is actually called 92XXM2-8 in Windows driver. But since pin configs for M22 and M28 are identical, just reuse M22 quirk. Fixes external microphone (tested) and probably docking station ports (not tested). Signed-off-by:
Alexander Tsoy <alexander@tsoy.me> Signed-off-by:
-
Gilad Ben-Yossef authored
commit f3ad5870 upstream. crypto_gcm_setkey() was using wait_for_completion_interruptible() to wait for completion of async crypto op but if a signal occurs it may return before DMA ops of HW crypto provider finish, thus corrupting the data buffer that is kfree'ed in this case. Resolve this by using wait_for_completion() instead. Reported-by:
Eric Biggers <ebiggers3@gmail.com> Signed-off-by:
Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Sebastian Reichel authored
commit 5165da59 upstream. Since v4.9 i2c-tiny-usb generates the below call trace and longer works, since it can't communicate with the USB device. The reason is, that since v4.9 the USB stack checks, that the buffer it should transfer is DMA capable. This was a requirement since v2.2 days, but it usually worked nevertheless. [ 17.504959] ------------[ cut here ]------------ [ 17.505488] WARNING: CPU: 0 PID: 93 at drivers/usb/core/hcd.c:1587 usb_hcd_map_urb_for_dma+0x37c/0x570 [ 17.506545] transfer buffer not dma capable [ 17.507022] Modules linked in: [ 17.507370] CPU: 0 PID: 93 Comm: i2cdetect Not tainted 4.11.0-rc8+ #10 [ 17.508103] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 17.509039] Call Trace: [ 17.509320] ? dump_stack+0x5c/0x78 [ 17.509714] ? __warn+0xbe/0xe0 [ 17.510073] ? warn_slowpath_fmt+0x5a/0x80 [ 17.510532] ? nommu_map_sg+0xb0/0xb0 [ 17.510949] ? usb_hcd_map_urb_for_dma+0x37c/0x570 [ 17.511482] ? usb_hcd_submit_urb+0x336/0xab0 [ 17.511976] ? wait_for_completion_timeout+0x12f/0x1a0 [ 17.512549] ? wait_for_completion_timeout+0x65/0x1a0 [ 17.513125] ? usb_start_wait_urb+0x65/0x160 [ 17.513604] ? usb_control_msg+0xdc/0x130 [ 17.514061] ? usb_xfer+0xa4/0x2a0 [ 17.514445] ? __i2c_transfer+0x108/0x3c0 [ 17.514899] ? i2c_transfer+0x57/0xb0 [ 17.515310] ? i2c_smbus_xfer_emulated+0x12f/0x590 [ 17.515851] ? _raw_spin_unlock_irqrestore+0x11/0x20 [ 17.516408] ? i2c_smbus_xfer+0x125/0x330 [ 17.516876] ? i2c_smbus_xfer+0x125/0x330 [ 17.517329] ? i2cdev_ioctl_smbus+0x1c1/0x2b0 [ 17.517824] ? i2cdev_ioctl+0x75/0x1c0 [ 17.518248] ? do_vfs_ioctl+0x9f/0x600 [ 17.518671] ? vfs_write+0x144/0x190 [ 17.519078] ? SyS_ioctl+0x74/0x80 [ 17.519463] ? entry_SYSCALL_64_fastpath+0x1e/0xad [ 17.519959] ---[ end trace d047c04982f5ac50 ]--- Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by:
Till Harbaum <till@harbaum.org> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Konstantin Khlebnikov authored
commit 887a9730 upstream. ext4_expand_extra_isize() should clear only space between old and new size. Fixes: 6dd4ee7c # v2.6.23 Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
-
Al Viro authored
commit a8c39544 upstream. failing sys_wait4() won't fill struct rusage... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Radim Krčmář authored
commit f0367ee1 upstream. Static checker noticed that base3 could be used uninitialized if the segment was not present (useable). Random stack values probably would not pass VMCS entry checks. Reported-by:
Paolo Bonzini <pbonzini@redhat.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Gleb Natapov authored
commit 378a8b09 upstream. If VMX reports segment as unusable, zero descriptor passed by the emulator before returning. Such descriptor will be considered not present by the emulator. Signed-off-by:
Gleb Natapov <gleb@redhat.com> Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by:
-
Wanpeng Li authored
commit cbfc6c91 upstream. Huawei folks reported a read out-of-bounds vulnerability in kvm pio emulation. - "inb" instruction to access PIT Mod/Command register (ioport 0x43, write only, a read should be ignored) in guest can get a random number. - "rep insb" instruction to access PIT register port 0x43 can control memcpy() in emulator_pio_in_emulated() to copy max 0x400 bytes but only read 1 bytes, which will disclose the unimportant kernel memory in host but no crash. The similar test program below can reproduce the read out-of-bounds vulnerability: void hexdump(void *mem, unsigned int len) { unsigned int i, j; for(i = 0; i < len + ((len % HEXDUMP_COLS) ? (HEXDUMP_COLS - len % HEXDUMP_COLS) : 0); i++) { /* print offset */ if(i % HEXDUMP_COLS == 0) { printf("0x%06x: ", i); } /* print hex data */ if(i < len) { printf("%02x ", 0xFF & ((char*)mem)[i]); } else /* end of block, just aligning for ASCII dump */ { printf(" "); } /* print ASCII dump */ if(i % HEXDUMP_COLS == (HEXDUMP_COLS - 1)) { for(j = i - (HEXDUMP_COLS - 1); j <= i; j++) { if(j >= len) /* end of block, not really printing */ { putchar(' '); } else if(isprint(((char*)mem)[j])) /* printable char */ { putchar(0xFF & ((char*)mem)[j]); } else /* other char */ { putchar('.'); } } putchar('\n'); } } } int main(void) { int i; if (iopl(3)) { err(1, "set iopl unsuccessfully\n"); return -1; } static char buf[0x40]; /* test ioport 0x40,0x41,0x42,0x43,0x44,0x45 */ memset(buf, 0xab, sizeof(buf)); asm volatile("push %rdi;"); asm volatile("mov %0, %%rdi;"::"q"(buf)); asm volatile ("mov $0x40, %rdx;"); asm volatile ("in %dx,%al;"); asm volatile ("stosb;"); asm volatile ("mov $0x41, %rdx;"); asm volatile ("in %dx,%al;"); asm volatile ("stosb;"); asm volatile ("mov $0x42, %rdx;"); asm volatile ("in %dx,%al;"); asm volatile ("stosb;"); asm volatile ("mov $0x43, %rdx;"); asm volatile ("in %dx,%al;"); asm volatile ("stosb;"); asm volatile ("mov $0x44, %rdx;"); asm volatile ("in %dx,%al;"); asm volatile ("stosb;"); asm volatile ("mov $0x45, %rdx;"); asm volatile ("in %dx,%al;"); asm volatile ("stosb;"); asm volatile ("pop %rdi;"); hexdump(buf, 0x40); printf("\n"); /* ins port 0x40 */ memset(buf, 0xab, sizeof(buf)); asm volatile("push %rdi;"); asm volatile("mov %0, %%rdi;"::"q"(buf)); asm volatile ("mov $0x20, %rcx;"); asm volatile ("mov $0x40, %rdx;"); asm volatile ("rep insb;"); asm volatile ("pop %rdi;"); hexdump(buf, 0x40); printf("\n"); /* ins port 0x43 */ memset(buf, 0xab, sizeof(buf)); asm volatile("push %rdi;"); asm volatile("mov %0, %%rdi;"::"q"(buf)); asm volatile ("mov $0x20, %rcx;"); asm volatile ("mov $0x43, %rdx;"); asm volatile ("rep insb;"); asm volatile ("pop %rdi;"); hexdump(buf, 0x40); printf("\n"); return 0; } The vcpu->arch.pio_data buffer is used by both in/out instrutions emulation w/o clear after using which results in some random datas are left over in the buffer. Guest reads port 0x43 will be ignored since it is write only, however, the function kernel_pio() can't distigush this ignore from successfully reads data from device's ioport. There is no new data fill the buffer from port 0x43, however, emulator_pio_in_emulated() will copy the stale data in the buffer to the guest unconditionally. This patch fixes it by clearing the buffer before in instruction emulation to avoid to grant guest the stale data in the buffer. In addition, string I/O is not supported for in kernel device. So there is no iteration to read ioport %RCX times for string I/O. The function kernel_pio() just reads one round, and then copy the io size * %RCX to the guest unconditionally, actually it copies the one round ioport data w/ other random datas which are left over in the vcpu->arch.pio_data buffer to the guest. This patch fixes it by introducing the string I/O support for in kernel device in order to grant the right ioport datas to the guest. Before the patch: 0x000000: fe 38 93 93 ff ff ab ab .8...... 0x000008: ab ab ab ab ab ab ab ab ........ 0x000010: ab ab ab ab ab ab ab ab ........ 0x000018: ab ab ab ab ab ab ab ab ........ 0x000020: ab ab ab ab ab ab ab ab ........ 0x000028: ab ab ab ab ab ab ab ab ........ 0x000030: ab ab ab ab ab ab ab ab ........ 0x000038: ab ab ab ab ab ab ab ab ........ 0x000000: f6 00 00 00 00 00 00 00 ........ 0x000008: 00 00 00 00 00 00 00 00 ........ 0x000010: 00 00 00 00 4d 51 30 30 ....MQ00 0x000018: 30 30 20 33 20 20 20 20 00 3 0x000020: ab ab ab ab ab ab ab ab ........ 0x000028: ab ab ab ab ab ab ab ab ........ 0x000030: ab ab ab ab ab ab ab ab ........ 0x000038: ab ab ab ab ab ab ab ab ........ 0x000000: f6 00 00 00 00 00 00 00 ........ 0x000008: 00 00 00 00 00 00 00 00 ........ 0x000010: 00 00 00 00 4d 51 30 30 ....MQ00 0x000018: 30 30 20 33 20 20 20 20 00 3 0x000020: ab ab ab ab ab ab ab ab ........ 0x000028: ab ab ab ab ab ab ab ab ........ 0x000030: ab ab ab ab ab ab ab ab ........ 0x000038: ab ab ab ab ab ab ab ab ........ After the patch: 0x000000: 1e 02 f8 00 ff ff ab ab ........ 0x000008: ab ab ab ab ab ab ab ab ........ 0x000010: ab ab ab ab ab ab ab ab ........ 0x000018: ab ab ab ab ab ab ab ab ........ 0x000020: ab ab ab ab ab ab ab ab ........ 0x000028: ab ab ab ab ab ab ab ab ........ 0x000030: ab ab ab ab ab ab ab ab ........ 0x000038: ab ab ab ab ab ab ab ab ........ 0x000000: d2 e2 d2 df d2 db d2 d7 ........ 0x000008: d2 d3 d2 cf d2 cb d2 c7 ........ 0x000010: d2 c4 d2 c0 d2 bc d2 b8 ........ 0x000018: d2 b4 d2 b0 d2 ac d2 a8 ........ 0x000020: ab ab ab ab ab ab ab ab ........ 0x000028: ab ab ab ab ab ab ab ab ........ 0x000030: ab ab ab ab ab ab ab ab ........ 0x000038: ab ab ab ab ab ab ab ab ........ 0x000000: 00 00 00 00 00 00 00 00 ........ 0x000008: 00 00 00 00 00 00 00 00 ........ 0x000010: 00 00 00 00 00 00 00 00 ........ 0x000018: 00 00 00 00 00 00 00 00 ........ 0x000020: ab ab ab ab ab ab ab ab ........ 0x000028: ab ab ab ab ab ab ab ab ........ 0x000030: ab ab ab ab ab ab ab ab ........ 0x000038: ab ab ab ab ab ab ab ab ........ Reported-by:
Moguofang <moguofang@huawei.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Moguofang <moguofang@huawei.com> Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
-
Michael Ellerman authored
commit e41e53cd upstream. virt_addr_valid() is supposed to tell you if it's OK to call virt_to_page() on an address. What this means in practice is that it should only return true for addresses in the linear mapping which are backed by a valid PFN. We are failing to properly check that the address is in the linear mapping, because virt_to_pfn() will return a valid looking PFN for more or less any address. That bug is actually caused by __pa(), used in virt_to_pfn(). eg: __pa(0xc000000000010000) = 0x10000 # Good __pa(0xd000000000010000) = 0x10000 # Bad! __pa(0x0000000000010000) = 0x10000 # Bad! This started happening after commit bdbc29c1 ("powerpc: Work around gcc miscompilation of __pa() on 64-bit") (Aug 2013), where we changed the definition of __pa() to work around a GCC bug. Prior to that we subtracted PAGE_OFFSET from the value passed to __pa(), meaning __pa() of a 0xd or 0x0 address would give you something bogus back. Until we can verify if that GCC bug is no longer an issue, or come up with another solution, this commit does the minimal fix to make virt_addr_valid() work, by explicitly checking that the address is in the linear mapping region. Fixes: bdbc29c1 ("powerpc: Work around gcc miscompilation of __pa() on 64-bit") Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Reviewed-by:
Paul Mackerras <paulus@ozlabs.org> Reviewed-by:
Balbir Singh <bsingharora@gmail.com> Tested-by:
Breno Leitao <breno.leitao@gmail.com> [bwh: Backported to 3.2: open-code virt_to_pfn()] Signed-off-by:
-
Johan Hovold authored
commit 46c319b8 upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Johan Hovold <johan@kernel.org> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
Julius Werner authored
commit b299cde2 upstream. /dev/mem currently allows mmap() mappings that wrap around the end of the physical address space, which should probably be illegal. It circumvents the existing STRICT_DEVMEM permission check because the loop immediately terminates (as the start address is already higher than the end address). On the x86_64 architecture it will then cause a panic (from the BUG(start >= end) in arch/x86/mm/pat.c:reserve_memtype()). This patch adds an explicit check to make sure offset + size will not wrap around in the physical address type. Signed-off-by:
-
Peter Ujfalusi authored
commit 6df2b42f upstream. We have one register for each EP to set the maximum packet size for both TX and RX. If for example an RX programming would happen before the previous TX transfer finishes we would reset the TX packet side. To fix this issue, only modify the TX or RX part of the register. Fixes: 550a7375 ("USB: Add MUSB and TUSB support") Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
-
Alan Stern authored
commit 63aea0db upstream. With threaded interrupts, bottom-half handlers are called with interrupts enabled. Therefore they can't safely use spin_lock(); they have to use spin_lock_irqsave(). Lockdep warns about a violation occurring in xhci_irq(): ========================================================= [ INFO: possible irq lock inversion dependency detected ] 4.11.0-rc8-dbg+ #1 Not tainted --------------------------------------------------------- swapper/7/0 just changed the state of lock: (&(&ehci->lock)->rlock){-.-...}, at: [<ffffffffa0130a69>] ehci_hrtimer_func+0x29/0xc0 [ehci_hcd] but this lock took another, HARDIRQ-unsafe lock in the past: (hcd_urb_list_lock){+.....} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(hcd_urb_list_lock); local_irq_disable(); lock(&(&ehci->lock)->rlock); lock(hcd_urb_list_lock); <Interrupt> lock(&(&ehci->lock)->rlock); *** DEADLOCK *** no locks held by swapper/7/0. the shortest dependencies between 2nd lock and 1st lock: -> (hcd_urb_list_lock){+.....} ops: 252 { HARDIRQ-ON-W at: __lock_acquire+0x602/0x1280 lock_acquire+0xd5/0x1c0 _raw_spin_lock+0x2f/0x40 usb_hcd_unlink_urb_from_ep+0x1b/0x60 [usbcore] xhci_giveback_urb_in_irq.isra.45+0x70/0x1b0 [xhci_hcd] finish_td.constprop.60+0x1d8/0x2e0 [xhci_hcd] xhci_irq+0xdd6/0x1fa0 [xhci_hcd] usb_hcd_irq+0x26/0x40 [usbcore] irq_forced_thread_fn+0x2f/0x70 irq_thread+0x149/0x1d0 kthread+0x113/0x150 ret_from_fork+0x2e/0x40 This patch fixes the problem. Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Felipe Balbi authored
commit 76a35293 upstream. Instead of having several return points, let's use a local variable and a single place to return. This makes the code slightly easier to read. [set ret = IRQ_HANDLED in default working case -Mathias] Signed-off-by:
-
Peter Chen authored
commit 7480d912 upstream. According to xHCI ch4.20 Scratchpad Buffers, the Scratchpad Buffer needs to be zeroed. ... The following operations take place to allocate Scratchpad Buffers to the xHC: ... b. Software clears the Scratchpad Buffer to '0' Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
-
Mathias Nyman authored
commit a0c16630 upstream. Intel Denverton microserver is Atom based and need the PME and CAS quirks as well. Signed-off-by:
-
Wan Ahmad Zainie authored
commit 6c97cfc1 upstream. Intel Apollo Lake also requires XHCI_PME_STUCK_QUIRK. Adding its PCI ID to quirk. Signed-off-by:
Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com> Signed-off-by:
-
Mathias Nyman authored
commit 346e9973 upstream. If a device is unplugged and replugged during Sx system suspend some Intel xHC hosts will overwrite the CAS (Cold attach status) flag and no device connection is noticed in resume. A device in this state can be identified in resume if its link state is in polling or compliance mode, and the current connect status is 0. A device in this state needs to be warm reset. Intel 100/c230 series PCH specification update Doc #332692-006 Errata #8 Observed on Cherryview and Apollolake as they go into compliance mode if LFPS times out during polling, and re-plugged devices are not discovered at resume. Signed-off-by:
-
Thomas Gleixner authored
commit 30e7d894 upstream. Enabling the tracer selftest triggers occasionally the warning in text_poke(), which warns when the to be modified page is not marked reserved. The reason is that the tracer selftest installs kprobes on functions marked __init for testing. These probes are removed after the tests, but that removal schedules the delayed kprobes_optimizer work, which will do the actual text poke. If the work is executed after the init text is freed, then the warning triggers. The bug can be reproduced reliably when the work delay is increased. Flush the optimizer work and wait for the optimizing/unoptimizing lists to become empty before returning from the kprobes tracer selftest. That ensures that all operations which were queued due to the probes removal have completed. Link: http://lkml.kernel.org/r/20170516094802.76a468bb@gandalf.local.homeSigned-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Fixes: 6274de49 ("kprobes: Support delayed unoptimizing") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Johan Hovold authored
commit 49e67dd1 upstream. The memory allocator passed to __unflatten_device_tree() (e.g. a wrapped kzalloc) can fail so add the missing sanity check to avoid dereferencing a NULL pointer. Fixes: fe140423 ("of/flattree: Refactor unflatten_device_tree and add fdt_unflatten_tree") Signed-off-by:
Rob Herring <robh@kernel.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Rajkumar Manoharan authored
commit 5667c86a upstream. Mesh forwarding path checks for address extension mode to fetch appropriate proxied address and MPP address. Existing condition that looks for 6 address format is not strict enough so that frames with improper values are processed and invalid entries are added into MPP table. Fix that by adding a stricter check before processing the packet. Per IEEE Std 802.11s-2011 spec. Table 7-6g1 lists address extension mode 0x3 as reserved one. And also Table Table 9-13 does not specify 0x3 as valid address field. Fixes: 9b395bc3 ("mac80211: verify that skb data is present") Signed-off-by:
Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> [bwh: Backported to 3.2: add mesh_flags variable in ieee80211_data_to_8023(), added separately upstream] Signed-off-by:
-
Johan Hovold authored
commit 93491ced upstream. Add define for the maximum number of ports on a SuperSpeed hub as per USB 3.1 spec Table 10-5, and use it when verifying the retrieved hub descriptor. This specifically avoids benign attempts to update the DeviceRemovable mask for non-existing ports (should we get that far). Fixes: dbe79bbe ("USB 3.0 Hub Changes") Acked-by:
-
