- 12 Jun, 2009 3 commits
-
-
Figo.zhang authored
vfree() does it's own NULL checking, no need for explicit check before calling it. Signed-off-by:
Figo.zhang <figo1802@gmail.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
yakui_zhao authored
Replace the DRM_DEBUG with the DRM_DEBUG_DRIVER to print the debug info in i915 driver. Signed-off-by:
Zhao Yakui <yakui.zhao@intel.com> Signed-off-by:
-
yakui_zhao authored
Replace the DRM_DEBUG with DRM_DEBUG_MODE macro to print the info in drm_mode. airlied:- fixed up to remove a conflicting #define Signed-off-by:
-
- 11 Jun, 2009 8 commits
-
-
yakui_zhao authored
Use the DRM_DEBUG_KMS/DEBUG_LOG_KMS to print the debug info for SDVO device. Signed-off-by:
-
yakui_zhao authored
Use the DRM_DEBUG_KMS macro definition to print the debug info for the LVDS. Signed-off-by:
-
yakui_zhao authored
Now all the DRM debug info will be reported if the boot option of "drm.debug=1" is added. Sometimes it is inconvenient to get the debug info in KMS mode. We will get too much unrelated info. This will separate several DRM debug levels and the debug level can be used to print the different debug info. And the debug level is controlled by the module parameter of drm.debug In this patch it is divided into four debug levels; drm_core, drm_driver, drm_kms, drm_mode. At the same time we can get the different debug info by changing the debug level. This can be done by adding the module parameter. Of course it can be changed through the /sys/module/drm/parameters/debug after the system is booted. Four debug macro definitions are provided. DRM_DEBUG(fmt, args...) DRM_DEBUG_DRIVER(prefix, fmt, args...) DRM_DEBUG_KMS(prefix, fmt, args...) DRM_DEBUG_MODE(prefix, fmt, args...) When the boot option of "drm.debug=4" is added, it will print the debug info using DRM_DEBUG_KMS macro definition. When the boot option of "drm.debug=6" is added, it will print the debug info using DRM_DEBUG_KMS/DRM_DEBUG_DRIVER. Sometimes we expect to print the value of an array. For example: SDVO command, In such case the following four DRM debug macro definitions are added: DRM_LOG(fmt, args...) DRM_LOG_DRIVER(fmt, args...) DRM_LOG_KMS(fmt, args...) DRM_LOG_MODE(fmt, args...) Signed-off-by: -
Dave Airlie authored
This shouldn't be there and is what broke r600 late in the 2.6.30 release cycle with Ben's patch. Signed-off-by: -
Ben Skeggs authored
A driver will use the _DRM_DRIVER map flag to indicate that it wants to be responsible for removing the map itself, bypassing the DRM's automagic cleanup code. Since the multi-master changes this has been broken, resulting in some drivers having their registers unmapped before it's finished with them. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Robert P. J. Day authored
Calls to kcalloc() for a single element can be simplified to calls to kzalloc(). Signed-off-by:
Robert P. J. Day <rpjday@crashcourse.ca> Cc: Dave Airlie <airlied@linux.ie> Cc: Eric Anholt <eric@anholt.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Pavel Roskin authored
Signed-off-by:
Pavel Roskin <proski@gnu.org> Cc: Eric Anholt <eric@anholt.net> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by:
-
Roel Kluin authored
When this macro isn't called with 'file_priv' this will result in a build failure. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
- 09 Jun, 2009 11 commits
-
-
Keith Packard authored
With the DRM-driven DPMS code, encoders are considered idle unless a connector is hooked to them, so mode setting is skipped. This makes load detection fail as none of the hardware is enabled. Signed-off-by:
Keith Packard <keithp@keithp.com> Signed-off-by:
Eric Anholt <eric@anholt.net>
-
Chris Wilson authored
To differentiate between encountering an out-of-memory error with running out of space in the aperture, use ENOSPC for the later. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Chris Wilson authored
Signed-off-by:
-
Chris Wilson authored
Signed-off-by:
-
Chris Wilson authored
Ensure that the drm_vblank_pre_modeset() is always balanced by drm_vblank_post_modeset() within intel_crtc_mode_set(). Signed-off-by:
-
Chris Wilson authored
The batch buffer may be shared with another read buffer, so we should not ignore any previously set domains, but just or in the command domain (and check that the buffer is not writable). Signed-off-by:
-
Chris Wilson authored
By sending a broken execbuffer (its length was not suitably aligned) I triggered an operation upon a freed object. The invalid alignment was discovered after updating the write_domain on the object but before the object was placed on the active queue. So during the unwind process following the error, the now freed object attempts to flush its non-existent, but outstanding, GPU writes causing this use-after-free. [drm:i915_dispatch_gem_execbuffer] *ERROR* alignment [drm:i915_gem_execbuffer] *ERROR* dispatch failed -22 WARNING: at lib/kref.c:43 warn_slowpath_null+0x10/0x15() Modules linked in: Pid: 4552, comm: lt-csi-drm Not tainted 2.6.30-rc6 #423 Call Trace: [<c0119ef3>] warn_slowpath_fmt+0x57/0x6d [<c014de24>] ? get_pageblock_migratetype+0x18/0x1e [<c014e8fd>] ? free_hot_page+0xa/0xc [<c014e915>] ? __free_pages+0x16/0x1f [<c0153ebf>] ? shmem_truncate_range+0x63e/0x656 [<c015fb2f>] ? slob_page_alloc+0x146/0x1c8 [<c0119f19>] warn_slowpath_null+0x10/0x15 [<c01f55f2>] kref_get+0x1b/0x21 [<c02605db>] i915_gem_object_move_to_active+0x1f/0x56 [<c0261302>] i915_add_request+0x156/0x19a [<c026136e>] i915_gem_object_flush_gpu_write_domain+0x28/0x3f [<c0261eca>] i915_gem_object_unbind+0x4a/0x124 [<c0261fd7>] i915_gem_free_object+0x33/0x9b [<c0250d6b>] drm_gem_object_free+0x28/0x4a [<c0250d43>] ? drm_gem_object_free+0x0/0x4a [<c01f55ce>] kref_put+0x38/0x41 [<c0250cbf>] drm_gem_object_unreference+0x11/0x13 [<c0250d06>] drm_gem_object_handle_unreference+0x1e/0x21 [<c0250d13>] drm_gem_object_release_handle+0xa/0xe [<c01f3e6b>] idr_for_each+0x5f/0x98 [<c0250d09>] ? drm_gem_object_release_handle+0x0/0xe [<c0250daf>] drm_gem_release+0x22/0x34 [<c025046f>] drm_release+0x1e8/0x3c4 [<c0162d25>] __fput+0xaf/0x146 [<c0162dce>] fput+0x12/0x14 [<c01605ef>] filp_close+0x48/0x52 [<c011b182>] put_files_struct+0x57/0x9b [<c011b1e4>] exit_files+0x1e/0x20 [<c011c6b6>] do_exit+0x16d/0x511 [<c03704ab>] ? __schedule+0x3d4/0x3e5 [<c0103f0d>] ? handle_irq+0xd/0x69 [<c011caa7>] do_group_exit+0x4d/0x73 [<c011cae0>] sys_exit_group+0x13/0x17 [<c010268c>] sysenter_do_call+0x12/0x2b Signed-off-by:
-
Michael Cousin authored
Signed-off-by:
Michael Cousin <mika.cousin@gmail.com> Signed-off-by:
-
Zhenyu Wang authored
Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
-
Zhenyu Wang authored
Update interrupt handling methods for IGDNG with new registers for display and graphics interrupt functions. As we won't use irq-based vblank sync in dri2, so display interrupt on new chip will be used for hotplug only in future. Signed-off-by:
-
Jesse Barnes authored
Using the new PNP resource checking code, this patch allows the i915 driver to allocate MCHBAR space if needed and use the BAR to determine current memory settings. [apw@canonical.com: moved to the new generic PNP resource interface] Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
Andy Whitcroft <apw@canonical.com> Signed-off-by:
-
- 05 Jun, 2009 18 commits
-
-
Bjorn Helgaas authored
Add a PNP resource range check function, indicating whether a resource has been assigned to any device. Signed-off-by:
Bjorn Helgaas <bjorn.helgaas@hp.com> [apw@canonical.com: fixed up exports et al] Signed-off-by:
-
Jesse Barnes authored
The sysrq functions are executed in hardirq context, so we shouldn't be calling sleeping functions from them, like mutex_locks or memory allocations. Fix up the i915 sysrq handler to avoid this. Signed-off-by:
-
Jesse Barnes authored
All G4x and newer chips use the new style frame count register, with a full 32 bit frame count. Update the code to reflect this. Signed-off-by:
-
Jarod Wilson authored
Fix a FIXME in the intel LVDS bring-up code, adding the appropriate blacklist entry for the AOpen Mini PC, courtesy of a dmidecode dump from Florian Demmer. Signed-off-by:
Jarod Wilson <jarod@redhat.com> CC: Florian Demmer <florian@demmer.org> Signed-off-by:
-
yakui_zhao authored
http://bugs.freedesktop.org/show_bug.cgi?id=20429Signed-off-by:
-
yakui_zhao authored
The general definition block contains the child device tables, which include the SDVO device info. For example: device slave address, device dvo port, device type. We will get the info of SDVO device by parsing the general definition blocks. Only when a valid slave address is found, it is regarded as the SDVO device. And the info of DVO port and slave address is recorded. http://bugs.freedesktop.org/show_bug.cgi?id=20429Signed-off-by:
-
yakui_zhao authored
Signed-off-by:
-
Keith Packard authored
This adds the register definitions for the display port enable register along with those for the GMCH and Link M/N ratios required to drive display port outputs. Signed-off-by:
-
Keith Packard authored
We can safely assume that cursor addresses will not extend beyond the addressable screen dimensions; setting the additional bits is harmless in any case. Signed-off-by:
-
Ma Ling authored
We detect TV connect status by setting DAC voltage level override values as 0.7 voltage for DAC_A/B/C. The corresponding 2-bits shold be 0x2, In order correctly to set last bit as 0, at first we must clean it. It fixed freedesktop.org bug #21204 Signed-off-by:
Ma Ling <ling.ma@intel.com> Signed-off-by:
-
Zhenyu Wang authored
Signed-off-by:
-
Zhenyu Wang authored
Signed-off-by:
-
Zhenyu Wang authored
This adds kernel mode setting on IGDNG with VGA output support. Note that suspend/resume doesn't work yet. Signed-off-by:
-
Zhenyu Wang authored
Swizzle bit detection not working right on it. Signed-off-by:
-
Zhenyu Wang authored
Disable OpRegion support for now until verified on new chipsets. Signed-off-by:
-
Zhenyu Wang authored
Signed-off-by:
-
Zhenyu Wang authored
Signed-off-by:
-
Zhenyu Wang authored
Both desktop and mobile versions are added. Signed-off-by:
-
